GoVideo R6750 User Manual

��

Table of Contents

1 - Welcome

4 - Operations

Unpacking / 7

RECORD

Compatible Media / 7

Front Panel / 8

Front Panel Display / 9

Rear Panel / 10

Basic Recording / 29

Recording from an External

PLAY

Special Playback Options / 33

Other Disc Playback / 34

2 - Connections

BASIC

Antenna/Basic Cable

Connections / 13

Cable Box Connections / 14

Basic TV Connections / 15

EDIT

Editing Options / 35

Channel Editing / 36

Formatting/Finalizing Discs / 37

ADVANCED

Enhanced Video Options / 16

Enhanced Audio Options / 17

Rear AV Connections / 18

Front AV Connections / 19

5 - Help

Customer Support / 39

Troubleshooting / 39

Technical Speciﬁcations / 41

Warranty / 42

3 - Setup

Index / 43

Setup Menu Overview / 21

About Menu Navigation / 21

System Settings / 22

Language Settings / 23

Playback Settings / 24

Record Settings / 25

Audio Settings / 26

TV T uner Settings / 27

trademarks of Dolby Laboratories.“DTS”and“DTS Digital Surround”are trademarks of Digital Theater Systems, Inc. All other brand

and product names are trademarks or registered trademarks of their respective companies.

Important Safety Instructions

Read Instructions - All the safety and oper-

ating instructions should be read before the

product is operated.

Retain Instructions - The safety and operat-

ing instructions should be retained for future

reference.

Heed Warnings - All warnings on the prod-

uct and in the operating instructions should

be adhered to.

Follow Instructions - All operating and us-

ing instructions should be followed.

Cleaning - Unplug this product from the

wall outlet before cleaning. Do not use liquid

cleaners or aerosol cleaners. Use a damp

cloth for cleaning.

Attachments - Do not use attachments not

recommended by the product manufacturer

as they may cause hazards.

Water and Moisture - Do not use this prod-

uct near water - for example near a bath tub,

wash bowl, kitchen sink, or laundry tub; in a

wet basement; or near a swimming pool; and

the like.

Accessories - Do not place this product on

an unstable cart, stand, tripod, bracket, or

table.The product may fall, causing serious

injury to a child or adult, and serious damage

to the product. Use only with a cart, stand,

tripod, bracket, or table recommended by the

manufacturer or sold with the product. Any

mounting of the product should follow the

manufacturer’s instructions and should use

a mounting accessory recommended by the

manufacturer.

must not be blocked or covered.The open-

ings should never be blocked by placing the

product on a bed, sofa, rug, or other similar

surface.This product should not be placed in

a built-in installation such as a bookcase or

rack unless proper ventilation is provided or

the manufacturer’s instructions have been

adhered to.

11 Power Sources - This product should be

operated only from the type of power source

indicated on the marking label. If you are not

sure of the type of power supplied to your

home, consult your product dealer or local

power company. For products intended to

operate from battery power, or other sources,

refer to the operating instructions.

12 Grounding or Polarization - This product

may be equipped with a polarized alternat-

ing - current line plug (a plug having one

blade wider than the other).This plug will ﬁt

into the power outlet only one way.This is a

safety feature. If you are unable to insert the

plug fully into the outlet, try reversing the

plug. If the plug should still fail to ﬁt, contact

your electrician to replace your obsolete

outlet. Do not defeat the safety purpose of

the polarized plug.

13 Alternate Warnings - This product is

equipped with a three-wire grounding-type

plug, a plug having a third (grounding) pin.

This plug will only ﬁt into the outlet, contact

your electrician to replace your obsolete

outlet. Do not defeat the safety purpose of

the grounding-type plug.

A product and

cart combination

should be moved

with care. Quick

stops, exces-

sive force, and

uneven surfaces

14 Power-Cord Protection - Power-supply

cords should be routed so that they are not

likely to be walked on or pinched by items

placed upon or against them, paying particu-

lar attention to cords at plugs, convenience

receptacles, and the point where they exit

from the product.

may cause the

product and cart

combination to

overturn.

15 Outdoor Antenna Grounding - If an outside

antenna or cable system is connected to the

product, be sure the antenna or cable system

is grounded so as to provide some protection

against voltage surges and built-up static

charges. Section 810 of the National Electri-

cal Code, ANSI/NFPA 70 provides informa-

tion with regard to proper grounding of the

��

10 Ventilation - Slots and openings in the cabi-

net are provided for ventilation and to ensure

reliable operation of the product and to

protect it from overheating.These openings

DVD Recorder User’s Guide

Important Safety Instructions

mast and supporting structure, grounding

of the lead-in wire to an antenna discharge

unit, size of grounding conductors, location

of antenna-discharge unit, connection to

grounding electrodes, and requirements for

the grounding electrode.

21 Damage Requiring Service - Unplug this

product from the wall outlet and refer servic-

ing to qualiﬁed service personnel under the

following conditions:

When the power-supply cord or plug is dam-

aged.

If liquid has been spilled or objects have

fallen into the product.

If the product has been exposed to rain or

water.

If the product does not operate normally by

following the operating instructions. Adjust

only those controls that are covered by the

operating instructions as an improper adjust-

ment of other controls may result in damage

and will often require extensive work by a

qualiﬁed technician to restore the product to

its normal operation.

16 Lightning - For added protection for this

product during a lightning storm or when

it is left unattended and unused for long

periods of time, unplug it from the wall outlet

and disconnect the antenna or cable system.

This will prevent damage to the product due

to lightning and power-line surges.

17 Power Lines - An outside antenna system

should not be located in the vicinity of over-

head power lines or other electric light or

power circuits, or where it can fall into such

power lines or circuits.When installing an

outside antenna system, extreme care should

be taken to keep from touching such power

lines or circuits as contact with them might

be fatal.

18 Overloading - Do not overload wall outlets,

extension cords, or integral convenience

receptacles as this can result in a risk of ﬁre or

electric shock.

19 Object and Liquid Entry - Never push

objects of any kind into this product through

openings as they may touch dangerous

voltage points or short-out parts that could

result in a ﬁre or electric shock. Never spill

liquid of any kind on the product.

If the product has been dropped or damaged

in any way.

When the product exhibits a distinct change

in performance-this indicates a need for

service.

22 Replacement Parts - When replacement

parts are required, be sure the service techni-

cian has used replacement parts speciﬁed

by the manufacturer or that have the same

characteristics as the original part. Unauthor-

ized substitutions may result in ﬁre, electric

shock, or other hazards.

23 Safety Check - Upon completion of any ser-

vice or repairs to this product, ask the service

technician to perform safety checks to deter-

mine that the product is in proper operating

condition.

24 Heat - The product should be situated away

from heat sources such as radiators, heat

registers, stoves, or other products (including

ampliﬁers) that produce heat.

25 Wall or Ceiling Mounting - The product

should be mounted to a wall or ceiling only

as recommended by the manufacturer.

20 Servicing - Do not attempt to service this

product yourself as opening or removing

covers may expose you to dangerous voltage

or other hazards. Refer all servicing to quali-

ﬁed service personnel.

1^Welcome

This Chapter provides a basic introduction to the DVD

Recorder, including an overview of the front panel, rear

panel, and remote control.

DVD Recorder User’s Guide

Unpacking

Check to make sure the following items are included with your DVD Recorder:

��

Compatible Media

This DVD Recorder will play the following discs:

•

DVD

Audio CD

Video CD/Super Video CD

MP3 ﬁles on CD-R/RW

JPEG ﬁles on CD-R/RW

DVD-R/RW

��

DVD+R/RW

This DVD Recorder will record on the following discs:

•

DVD+R (Write Once)

DVD+RW (ReWritable)

1 - Welcome

Front Panel

Front panel overview:

� �

�

� �

R6750 DVD+R/RW RECORDER

POWER

OPEN/CLOSE

INPUT

LINE IN

DV IN

VIDEO

AUDIO

� � ��

��

POWER button

INPUT button*

PLAYbutton

STOPbutton

OPEN/CLOSE button

Disc Tray

Front Panel Display

PREV/NEXTbuttons

RECORDbutton

10 PAUSEbutton

11 DV Input

12 AV IN 1 jacks

^�• The INPUT button allows you to easily switch among all your input sources, including

DVD,TV, AV1-Front, AV2-Rear, S-Video, and DV.

�

DVD Recorder User’s Guide

Front Panel Display

Front panel display overview:

� � � � � �

� � � ��

DVD SVCD VCD

MP3

JPEG RW

TIMER

��

Play indicator

DVD indicator

SVCD indicator

VCD indicator

CD indicator

DVD+RW indicator

DVD+R indicator

10 Record indicator

11 Pause Indicator

12 Status window

MP3 indicator

JPEG indicator

13 Timer recording mode

1 - Welcome

Rear Panel

Rear panel overview:

COAXIAL

OPTICAL

AUDIO IN

AUDIO OUT

ANTENNA IN

S-VIDEO IN

S-VIDEO OUT

ANTENNA

VIDEO

PASSTHROUGH

(NO DVD OUTPUT)

AV IN 2

COMPONENT OUT

AV OUT

DIGITAL OUT

� �

�

� �

ANTENNA IN jack

AV OUT jacks

ANTENNA PASSTHROUGH jack*

S-VIDEO IN jack

S-VIDEO OUT jack

OPTICAL OUT jack

COAXIAL OUT jack

AV IN 2 jacks

COMPONENT VIDEO OUT jacks

^�• The ANTENNA PASSTHROUGH jack outputs the TV signal only, and is NOT for DVD

playback.

�

DVD Recorder User’s Guide

Remote Control

Remote control overview:

OPEN/CLOSE button

0-9 buttons

OPEN/CLOSE

POWER

�

��

TITLE button

PREV/NEXTbuttons

STOPbutton

�

PLAYbutton

DISPLAY

SETUP

ARROWbuttons

GUIDER button

INPUT button

DISC

��

TITLE

�

10 RECORDbutton

11 POWER button

REW

�

STOP

PLAY

PAUSE/STEP

12 CHbuttons

13 DISPLAY button

��

14 DISC MENU button

15 SETUP button

��

ENTER

�

16 REW/FFbuttons

17 PAUSE/STEPbutton

18 ENTER button

19 PLAY OPTIONS button

20 EDIT button

PLAY

GUIDER

INPUT

OPTIONS

��

�

21 TIMER RECORD button

RECORD

TIMER

EDIT

��

^�• The GUIDER button is a fun and

easy way to record, play, format, and

ﬁnalize discs; see pages 29, 30, and 37.

�

1 - Welcome

2^Connections

This Chapter shows you how to connect the DVD

Recorder to your TV and other home theater com-

ponents.

•

For basic connections, see pages 13-15.

For advanced connections, see pages 16-19.

DVD Recorder User’s Guide

Antenna/Basic Cable Connections

If you are using an antenna or basic cable TV service to receive TV programs:

1 Connect the RF coaxial cable from the antenna or cable wall outlet to the rear

panel of the DVD Recorder as shown.

2 Connect the DVD Recorder to your TV; see page 15.

��

COAXIAL

AUDIO IN

AUDIO OUT

ANTENNA IN

S-VIDEO IN

S-VIDEO OUT

OPTICAL

ANTENNA

VIDEO

PASSTHROUGH

(NO DVD OUTPUT)

AV IN 2

COMPONENT OUT

AV OUT

DIGITAL OUT

NOTE:

• Do not connect the AC power cord until all other connections have

been made.

• The DVD Recorder receives broadcast channels 1-69 and cable TV

channels 1-125.

2 - Connections

Cable Box Connections

If you are using a cable box or satellite receiver to receive TV programs:

1 Connect an RF cable from the wall outlet to the cable box.

2 Connect an RF cable from the cable box to the DVD Recorder.

3 Connect the DVD Recorder to your TV; see page 15.

��

COAXIAL

AUDIO IN

AUDIO OUT

ANTENNA IN

S-VIDEO IN

S-VIDEO OUT

OPTICAL

ANTENNA

VIDEO

PASSTHROUGH

(NO DVD OUTPUT)

AV IN 2

COMPONENT OUT

AV OUT

DIGITAL OUT

NOTE:

• With this connection, you will set the DVD Recorder to channel 2, 3, or 4 and then

select channels on the cable box.

DVD Recorder User’s Guide

Basic TV Connections

If your TV has standard audio/video inputs (red, white, and yellow RCA jacks):

1 Connect the supplied audio/video cables from the DVD Recorder to your TV as

shown.

2 Connect the supplied power cable from the DVD Recorder to a standard wall out-

let.

3 Press POWER to turn on the DVD Recorder.

4 Turn on your TV and select the Video input to view the DVD Recorder.

• The GoVideo splash screen appears.

5 Continue with Chapter 3 to set up your DVD Recorder.

��

COAXIAL

OPTICAL

AUDIO IN

AUDIO OUT

ANTENNA IN

S-VIDEO IN

S-VIDEO OUT

ANTENNA

VIDEO

PASSTHROUGH

(NO DVD OUTPUT)

AV IN 2

COMPONENT OUT

AV OUT

DIGITAL OUT

��

NOTE:

• The ANTENNA PASSTHROUGH cannot be used to view the DVD Recorder.This output

only passes the antenna or cable signal through to your TV.

• If your TV has S-Video or Component Video inputs, see page 16.

2 - Connections

Enhanced Video Options

If your TV has S-Video or Component Video inputs, you can enjoy

superior picture quality.

��

1 Connect an S-Video cable OR set of Component Video cables

from the DVD Recorder to your TV as shown.

��

2 Select the S-Video or Component Video input on your TV to

view the DVD Recorder.

��

3 Activate the S-Video or Component/Progressive Scan Video

output in the Setup menu; see page 22.

��

COAXIAL

OPTICAL

AUDIO IN

AUDIO OUT

ANTENNA IN

S-VIDEO IN

S-VIDEO OUT

ANTENNA

VIDEO

PASSTHROUGH

(NO DVD OUTPUT)

AV IN 2

COMPONENT OUT

AV OUT

DIGITAL OUT

��

�

��

NOTE:

• If you use one of these enhanced video connections, you must enable the Video

Output in the menu system; see page 22.

• Be sure to choose one of the audio connection options on page 17.

DVD Recorder User’s Guide

Enhanced Audio Options

If you have a stereo system or digital audio receiver, you can enjoy

superior sound quality.

��

1 Connect stereo audio cables from the DVD Recorder to your

stereo system as shown.

��

Connect a digital optical OR coaxial cable from the DVD Re-

corder to your digital audio receiver as shown.

��

2 Select the appropriate audio input on your stereo or receiver to

hear the DVD Recorder.

• If you used either of the digital connections, you just activate

the digital audio output in the Setup menu; see page 26.

COAXIAL

OPTICAL

AUDIO IN

AUDIO OUT

ANTENNA IN

S-VIDEO IN

S-VIDEO OUT

ANTENNA

VIDEO

PASSTHROUGH

(NO DVD OUTPUT)

AV IN 2

COMPONENT OUT

AV OUT

DIGITAL OUT

��

NOTE:

• If you use the Optical or Coaxial connection, you must set the DVD Recorder’s Audio

Output settings to match the capabilities of your receiver; see page 26.

• If your receiver is equipped with a Dolby Digital and/or DTS decoder your can enjoy

5.1 surround sound playback while watching DVD movies.

2 - Connections

Rear AV Connections

You can view and record from an external device, such as a VCR, connected to the rear

AV or S-Video inputs.

1 Connect standard audio/video cables from the outputs of the external device to

the inputs of the DVD Recorder as shown.

Connect an S-Video cable and audio cables from the outputs of the external device

to the inputs of the DVD Recorder as shown.

2 Press INPUT until AV2-Rear or S-Video appears on the screen.

��

COAXIAL

OPTICAL

AUDIO IN

AUDIO OUT

ANTENNA IN

S-VIDEO IN

S-VIDEO OUT

ANTENNA

VIDEO

PASSTHROUGH

(NO DVD OUTPUT)

AV IN 2

COMPONENT OUT

AV OUT

DIGITAL OUT

��

NOTE:

• To view the external device, press INPUT on the remote control until AV2-Rear or S-

Video appears on screen.

• To record from the external device, see page 30.

DVD Recorder User’s Guide

Front AV Connections

You can view and record from an external device, such as a camcorder or video game,

connected to the front panel AV or DV inputs.

1 Connect standard audio/video cables from the outputs of the external device to

the inputs of the DVD Recorder as shown.

Connect a DV cable from the external device to the front panel of the DVD Record-

er as shown.

2 Press INPUT until AV1-Front or DV appears on the screen.

��

R6750 DVD+R/RW RECORDER

INPUT

LINE IN 1

DV IN

VIDEO

L - AUDIO - R

��

NOTE:

• To view the external device, press INPUT on the remote control until AV1-Front or DV

appears on screen.

• To record from the external device, see page 30.

2 - Connections

3^Setup

This Chapter shows you customize the DVD Re-

corder to meet your personal requirements and

preferences.

Key settings:

•

To set the date and time, see page 22.

To set your TV aspect ratio, see page 24

To search for TV channels, see page 27.

DVD Recorder User’s Guide

Setup Menu Overview

The Setup menu allows you to customize your DVD Recorder. Choose from six

categories:

•

System Settings – see page 22

Language Settings – see page 23

Playback Settings – see page 24

Record Settings – see page 25

Audio Settings – see page 26

TV Tuner Settings – see page 27

SETUP

Video Output S-Video

System

11/14/2004

Date

Language

Playback

Record

Time

11:32:55AM

Off

Auto-sleep

Default

-----------

Audio

TV Tuner

Exit

About Menu Navigation

•

Press POWER to turn on the DVD Recorder.

Press SETUP to display the Setup menu.

Use the keys to move up and down.

Use the keys to move left and right.

Press ENTER to conﬁrm your selections.

Press SETUP again to exit the Setup menu.

OPEN/CLOSE

POWER

DISPLAY

SETUP

DISC

TITLE

��

REW

STOP

PLAY

PAUSE/STEP

��

ENTER



3 - Setup

System Settings

Video Output

SETUP

Activates the S-Video, Component Video,

or Progressive Scan output to your TV.

Video Output S-Video

System

11/14/2004

Date

Language

Playback

Record

Time

11:32:55AM

Off

1 Press SETUP.

Auto-sleep

Default

-----------

2 Select System > Video Output.

3 Choose from the following:

Audio

TV Tuner

Exit

S-Video - Activates the S-Video

output.

Component - Activates the Compo-

nent Video output.

Sleep Timer

Sets the sleep timer.

Progressive - Activates the Progres-

sive Scan output.

1 Press SETUP.

2 Select System > Auto-sleep.

3 Set the timer from 30 to 120 minutes.

• The DVD Recorder will power off

automatically after the speciﬁed

time has elapsed.

NOTE:

• Do NOT choose Progressive unless

you have connected the DVD

Recorder to a TV equipped with a

480p Progressive Scan input.

• If you select Progressive accidentally

and the picture is distorted, press

ENTER to cancel, or wait a few

seconds for the screen to revert to

normal.

• To disable the sleep timer, select Off.

Factory Settings

Restores the DVD Recorder to its original

factory settings.

1 Press SETUP.

2 Select System > Default > Restore.

• The DVD Recorder will restart with

all menu settings restored to their

factory defaults.

Date & Time

Sets the date and time.This is necessary

if you wish to record TV shows with the

timer record feature.

1 Press SETUP.

2 Select System > Date

3 Set the month, day, and year.

• Use to move the cursor.

• Use to change each setting.

4 Select System > Time.

5 Set the hour, minutes, seconds, and

AM/PM.

SETUP

ENTER

• Use to move the cursor.

• Use to change each setting.

��

DVD Recorder User’s Guide

Language Settings

On-Screen Display Language

Sets the default language for On-Screen

Displays and the Setup menu.

SETUP

OSD

English

System

Language

Playback

Record

Audio

English

1 Press SETUP.

Subtitle

2 Select Language > OSD.

3 Select your preferred OSD language

(English, Français, or Español).

Audio

TV Tuner

Exit

Menu Language

Sets your preferred language for DVD

Disc Menus.

Subtitle Language

Sets your preferred language for DVD

subtitles.

1 Press SETUP.

2 Select Language > Menu.

3 Select your preferred DVD Disc Menu

language.

1 Press SETUP.

2 Select Language > Subtitle.

3 Select your preferred DVD Subtitle

language.

Audio Language

Sets your preferred language for DVD

audio soundtracks.

• To disable subtitles, choose Off.

1 Press SETUP.

2 Select Language > Audio.

3 Select your preferred DVD Audio lan-

guage.

SETUP

ENTER

^�• If YourDVD is turned on (see page 24), the DVD Recorder will

�

��

search and select your preferred Audio and Subtitle languages

automatically whenever you load a DVD movie.

3 - Setup

Playback Settings

Parental Control

YourDVD

Blocks playback of rated DVDs based on

their content. Not all discs are rated.

YourDVD automatically searches for

your playback preferences (including

Audio language, Subtitle language,

and Surround mode) every time you

load a DVD disc. It then selects those

preferences if they are available on the

disc.

1 Press SETUP.

2 Select Playback > Parental.

3 Select the desired Parental Control

rating from 1 (Kid Safe) to 8 (Adult).

• Choose Off to disable the Parental

Control feature.

1 Press SETUP.

4 Enter your password using the 0-9

2 Select Playback > YourDVD.

3 Turn YourDVD on or off.

keys.

• The factory default password is

0000.

AutoPlay

AutoPlay skips the ads and trailers and

starts DVD playback automatically when

you load a disc.

Password

Changes the Parental Control password.

1 Press SETUP.

2 Select Playback > Password.

3 Enter your old password using the 0-9

keys.

2 Select Playback > AutoPlay.

3 Turn AutoPlay on or off.

Aspect Ratio

4 Enter your new password.

Sets your preferred aspect ratio for DVD

movies.

5 Re-enter your new password.

Slideshow Time

Sets the slide show interval (the time

between slides) when a JPEG Picture CD

is playing.

1 Press SETUP.

2 Select Playback > Aspect Ratio.

3 Choose from the following:

16:9 Wide - Select if you

have a widescreen TV.

1 Press SETUP.

2 Select Playback > Slide Time.

3 Choose a slide interval from 3~99

seconds.

4:3 L. Box - Select if

you have a standard TV and prefer to

watch widescreen mov-

ies with black bars above

and below the picture.

• To disable automatic slideshows,

select Off.

SETUP

4:3 Pan - Select if you have a stan-

dard TV and prefer to

ENTER

have widescreen movies

cropped (“Pan & Scan”) to

ﬁt the screen.

��

DVD Recorder User’s Guide

Record Settings

Record Quality

Sets the default quality for DVD

recording.

SETUP

Quality

SP (2 Hrs)

5 minutes

System

Chapter Mark

Language

Playback

Record

1 Press SETUP.

2 Select Record > Quality.

Audio

3 Choose from the following:

TV Tuner

Exit

HQ (best) – 1 hour/disc

SP (better) – 2 hours/disc

EP (good) – 4 hours/disc

SLP (fair) – 6 hours/disc

Auto Chapter Marking

Enables automatic chapter marking at

regular intervals during DVD recording.

1 Press SETUP.

2 Select Record > Chapter Mark.

3 Choose from the following:

Off – Disables automatic chapter

marking.

5~30 minutes - Chapters will be cre-

ated automatically every 5~30 min-

utes during recording.

SETUP

ENTER

^�• Automatic Chapter Marking makes it easy to browse your

�

��

DVD recordings later using the PREV/NEXTbuttons.

3 - Setup

Audio Settings

Digital Out

Sets the format of the digital audio signal

from the rear panel Optical and Coaxial

jacks.

SETUP

Digital Out

DTS Out

Surround

Bit Stream

Off

System

Language

Playback

Record

DOLBY

1 Press SETUP.

Audio

2 Select Audio > Digital Out.

TV Tuner

3 Choose from the following:

Exit

PCM – Select if the DVD Recorder is

connected to a 2-channel (stereo)

digital ampliﬁer.

Surround Sound

Sets your preferred surround sound

format when watching DVD movies.

Bit Stream - Select if the DVD Re-

corder is connected to a 5.1 channel

ampliﬁer/receiver with a Dolby Digital

decoder.

1 Press SETUP.

2 Select Audio > Surround

3 Choose from the following:

DTS Out

Enables the DVD Recorder to output a

DTS (Digital Theater Sound) signal to an

external receiver with a DTS decoder.

Stereo – Select if you prefer to hear

the stereo soundtrack on DVD movies

(if available).

Dolby - Select if you prefer to hear

the Dolby Digital 5.1 soundtrack on

DVD movies (if available).

1 Press SETUP.

2 Select Audio > DTS Out

3 Turn DTS Out on or off.

DTS - Select if you prefer to hear the

DTS 5.1 soundtrack on DVD movies (if

available).

SETUP

ENTER

^�• If you are not using the digital audio outputs (Optical or

�

��

Coaxial), you do not need to adjust these settings.

DVD Recorder User’s Guide

TV Tuner Settings

TV Signal

SETUP

Start Scan

Add/Delete

Swap

Speciﬁes whether the DVD Recorder is

connected to an antenna or cable TV

source.

TV Signal

Uilities

Auto

System

-----------

Language

Playback

Record

Audio

CH:15

1 Press SETUP.

2 Select TV Tuner > TV Signal

TV Tuner

Exit

3 Choose from the following:

Antenna - Select if the DVD Recorder

is connected to an antenna.

3 Add or delete channels:

Cable - Select if the DVD Recorder is

connected to a cable TV source.

• Use to select the desired

channel.

Auto - Select to have the DVD Re-

corder automatically detect if you are

using an antenna or cable.

• Press ENTER to add or delete the

channel.

• When ﬁnished, select Exit and press

ENTER.

Auto Channel Search

Automatically searches for all available

TV stations from antenna or cable TV.

Swap Channels

Allows you to swap the TV channel order

stored in the DVD Recorder to match the

channel order stored in your TV set.

1 Press SETUP.

2 Select TV Tuner > Utilities > Start

Scan.

1 Press SETUP.

• The DVD Recorder searches for all

available stations.This may take

several minutes to complete.

• When ﬁnished, press SETUP to exit.

2 Select TV Tuner > Utilities > Swap.

3 Select the channel to be swapped,

and press ENTER.

4 Select the new channel position, and

press ENTER.

Add/Delete Channels

Allows you to manually add or remove

channels.

• The channels will swap positions.

• Repeat as necessary.

• When ﬁnished, select Exit and press

ENTER.

1 Press SETUP.

2 Select TV Tuner > Utilities > Add/De-

lete.

SETUP

ENTER

^�• If you are using a cable box or satellite receiver, you do not

need to adjust these settings.

�

��

3 - Setup

4^Operations

This Chapter shows you how to use the most com-

mon features of the DVD Recorder, including re-

cording, playback, and editing DVDs.

•

For recording features, see pages 29-31.

For playback features, see pages 32-34.

For editing features, see pages 35-37.

DVD Recorder User’s Guide

Basic Recording

• If you are using a cable box/satellite

receiver, set the DVD recorder to the

receiver’s output channel (2, 3 or 4)

and select the desired channel on

the cable box/receiver.

Recording from TV

Follow these steps to record a TV show to

DVD.

1 Insert a blank DVD+R or DVD+RW

disc into the disc tray.

6 Select the desired recording quality

• Press OPEN/CLOSE to open and

close the disc tray.

and press ENTER.

• When you insert a blank disc, the

DVD Recorder will format (or“initial-

ize”) the disc automatically.

2 Press GUIDER to display the“Easy

Guider”menu.

1hr HQ

2hr SP

4hr EP

EXIT

6hr SLP

3 Use to select“Record”, then press

ENTER.

HQ (best) – 1 hour/disc

SP (better) – 2 hours/disc

EP (good) – 4 hours/disc

SLP (fair) – 6 hours/disc

Playback

Record

Erase

EXIT

Finalize

7 Press ENTER to start recording.

• To pause recording, press PAUSE.

• To resume recording, press PAUSE

again.

4 Use to select“TV”, then press

ENTER.

• To view the status of your recording,

press DISPLAY.

AV1

8 When ﬁnished, press STOPto stop

recording.

AV2

• The disc is updated with the new

recording.This may take a few min-

utes to complete.

S-Video

EXIT

• To watch your recording, see page

32.

• To ﬁnalize your disc to play on other

DVD players, see page 37.

5 Use to select the channel you

want to record, then press ENTER.

NOTE:

EXIT

• You cannot change channels or

record quality during recording.

4 - Operations

Recording from an External Source

Recording from a VCR,

Camcorder, etc.

Follow these steps to record from a VCR,

camcorder, or other external device.

6 Press RECto start recording.

• To pause recording, press PAUSE.

• To resume recording, press PAUSE

again.

7 When ﬁnished, press STOPto stop

1 Connect your external device to the

front panel or rear panel inputs; see

pages 18-19.

recording.

• The disc is updated with the new

recording.This may take a few min-

utes to complete.

• To watch your recording, see page

32.

2 Insert a blank DVD+R or DVD+RW

disc into the disc tray.

• Press OPEN/CLOSE to open and

close the disc tray.

3 Press INPUT repeatedly to select:

Notes on DV Recording

AV1-Front - For a device connected

to the front Audio/Video Input.

•

Connect a DV-compatible camcorder

to the front panel DV jack with a IEEE-

1394 4-pin DV cable (not included).

A single DV cable is used for input

and output of audio, video, data, and

control signals.

AV2-Rear - For a device connected to

the rear Audio/Video Input.

S-Video - For a device connected to

the rear S-Video Input.

After recording stops, a DV control

bar appears on screen:

DV - For a device (such as a digital

camcorder) connected to the front

DV Input with a DV cable.

4 Set the desired Record Quality.

• Press SETUP, then select

Record>Quality; see page 25 for

details.

5 Cue the device and start playback at

the beginning of the scene you wish

to record.

•

You can use this control bar to Stop,

Play, Pause, Fast-Forward, and Rewind

the DV camcorder using your DVD

Recorder remote control.

^�• You can also use Easy Guider to record from an external source. Just follow the steps

on page 29, but on Step 4, select “AV1”,“AV2”,“S-Video” or “DV” instead of “TV”.

�

DVD Recorder User’s Guide

Timer Recording

Before You Begin

8 Press and ENTER to select:

•

Make sure the Date and Time are set

correctly; see page 22.

TV - To record from TV (use to

select the desired channel).

•

Make sure your disc has enough

space to record the desired pro-

gram (press DISC MENU to view the

amount of available recording time).

AV1-Front - To record from the front

Audio/Video Input.

AV2-Rear - To record from the rear

Audio/Video Input.

Setting a Timer Recording

To program a timer recording:

S-Video - To record from the rear S-

Video Input.

1 Insert a blank DVD+R or DVD+RW

disc into the disc tray.

DV-Front - To record from the front

DV Input.

• Press OPEN/CLOSE to open and

close the disc tray.

9 Press to select“Quality”and

press ENTER.

2 Press TIMER to display the Timer Re-

10 Press and ENTER to select:

cord menu:

HQ (best) – 1 hour/disc

SP (better) – 2 hours/disc

EP (good) – 4 hours/disc

EXIT

SLP (fair) – 6 hours/disc

11 If the Status column says“Ready,”

then programming is complete.

• If the Status column is blank, there

is a problem with the timer record-

ing. Use the keys to go back

and change the settings.

Mode

- - - - -

Date

Start

End

Source

- - - - -

Quality

- - - - -

Status

- - - - -

Reset

- - - - -

3 Press to select one of the timer

events.

4 Press to select“Mode”and press

• If you have not set the date and

time; see page 22.

ENTER.

5 Press and ENTER to select:

12 Press POWER to turn off the DVD

Once - For a one-time recording.

Recorder.

• The DVD Recorder must be turned

off to activate the Timer Recording.

• The TIMER indicator on the front

panel display will light.

Weekly - For a weekly recording.

Daily - For a daily recording.

6 Use the  and ENTER keys to

select and set:

• Timer Recording continues until

you stop the recording or the disc is

full.

Date - The date or day of the week of

the recording.

Start - The recording start time.

End - The recording stop time.

7 Press to select“Source”and

press ENTER.

4 - Operations

DVD Playback

Playing a DVD

Playing a DVD+R/+RW

Follow these steps to play a DVD.

Follow these steps to play a DVD that

you’ve recorded on the DVD Recorder.

1 Press POWER to turn on the DVD

Recorder.

1 Press POWER to turn on the DVD

Recorder.

2 Load your DVD in the disc tray with

the label side up.

• Press OPEN/

2 Load your DVD+R/RW in the disc tray

with the label side up.

CLOSE to open

and close the

• Press OPEN/CLOSE to open and

close the disc tray.

disc tray.

3 Press PLAYor DISC MENU to view

the DVD Disc Menu.

3 Press PLAYto

start playback.

• All Titles (recorded programs) on

the DVD+R/RW are displayed.

• Many DVD discs

start playback

automatically

when loaded.

• If the DVD has

TITLE 01

20:29:37 09/11/03

00:26:41 HQ

TITLE 02

08:30:00 09/12/03

00:08:05 SP

TITLE 03

09:30:00 09/12/03

00:05:32 HQ

a Disc Menu,

or more than

TITLE 04

18:59:00 09/12/03

00:30:02 SLP

TITLE 05

TITLE 06

23:00:00 09/12/03

00:21:00 HQ

20:00:37 09/12/03

00:10:30 EP

Text View

one Title, the Disc Menu may ap-

pear. If so, use to highlight

options, and press ENTER to make

selections.

• For special playback options, see

page 33.

4 Press to select the Title you

want to play and press ENTER.

• For special playback options, see

page 33.

^�• To switch to a text based menu, select the “Text View” icon and press ENTER.

• To switch back to the graphical menu, select the “Thumbnail View” icon and press

ENTER.

�

• You can also press GUIDER and select “Playback” to view the DVD Disc Menu.

DVD Recorder User’s Guide

Special Playback Options

Special Options During

Playback

Play Options Menu

Press PLAY OPTIONS during playback to

display the Play Options menu. Use the

and ENTER keys to select from

the following options:

DISC

DISC MENU

Displays the DVD Disc

Menu (if available). Use

the and ENTER

keys to select options in

the Disc Menu.

Slow Motion

A-B Repeat

Subtitle

Audio

Plays slow motion forward

or backward at 1/2 or 1/4

normal speed. Press PLAY

to resume normal play.

TITLE

Displays the DVD Title

Menu (if available).

Angle

Information

Exit

DISPLAY

Jumps to a speciﬁc Title,

Chapter, or Time. Use the

0-9 keys and press ENTER

to start playback from the

speciﬁed time.

Displays playback infor-

mation, including the disc

type, the current Title and

Chapter number, and the

elapsed playback time.

A-B Repeat

PREV/NEXT

Skips to the next or previ-

ous chapter.

Sets two points (A and B)

to repeat in a loop. Select

Cancel to resume normal

play.

REW

FF/REW

Scans forward or backward

at 2x, 4x, 8x, or 16x normal

speed.

Subtitle

Displays available subtitles

on the DVD.

PAUSE/STEP

PAUSE/STEP

Audio

Pauses playback.While in

Pause mode, press repeat-

edly to step forward one

frame at a time.

Displays available

soundtracks/audio formats

on the DVD.

Angle

PLAY

OPTIONS

PLAY OPTIONS

Displays available camera

angles on the DVD.

Shortcut to a variety of

special playback features;

see right column.

Information

Displays current playback

information, including

Title, Chapter, elapsed play-

back time, and more.

4 - Operations

Other Disc Playback

Audio CD Playback

To play an Audio CD:

Photo CD Playback

To play JPEG ﬁles on CD-R/RW:

1 Load the Audio CD in the disc tray.

• The disc will begin playback auto-

matically.

1 Load the JPEG disc in the disc tray.

• The slideshow will begin automati-

cally.

2 Press to browse the pictures.

3 Press to rotate the pictures

clockwise/counter-clockwise.

2 Press PREV/ NEXTto browse the

tracks.

3 Press PAUSEto pause playback.

4 Press STOPto stop playback.

5 Use the 0-9 keys to select a speciﬁc

audio track, then press ENTER.

• Playback will start from the selected

track.

4 Press PAUSEto pause the slideshow.

5 Press STOPto stop the slideshow.

MP3 CD Playback

To play MP3 ﬁles on CD-R/RW:

Notes on MP3/JPEG Playback

•

Files must have the“JPG”or“MP3”ﬁle

extensions.

1 Load the MP3 disc in the disc tray.

• The disc will begin playback auto-

matically.

•

It may take several minutes to load

the disc, depending on the numbers

of ﬁles and/or folders.

2 Press PREV/ NEXTto browse the

MP3 ﬁles.

•

FFand REWdo not work during

JPEG/MP3 disc playback.

Supports bitrates 32~320Kbps.

3 Press PAUSEto pause MP3 playback.

4 Press STOPto stop MP3 playback.

^�• If your CD-R/RW has both MP3 and JPEG ﬁles, use PREVand NEXTto browse the

�

MP3 ﬁles, and to browse the pictures.

DVD Recorder User’s Guide

Editing Options

About Title Editing

Protecting a Title

Once you have recorded a Title to a

DVD+R/RW disc, you can name, protect,

overwrite, or erase it using the Title Editor

menu.

You can protect a title on your disc from

being accidentally erased or overwritten.

1 Select Protection, then press ENTER.

2 Turn Protection on or off, then press

ENTER.

1 Press PLAY or GUIDER to display the

DVD Disc Menu.

2 Use the keys to select the

desired Title, then press EDIT to dis-

play the“Title Edit”menu.

Overwriting a Title

You can choose to overwrite an existing

title (DVD+RW discs only).

•

On DVD+R discs, each new recording

is always placed immediately after

the previous recording, so the original

recordings cannot be overwritten.

EDIT

Title Name : TITLE 01

Protection: Off

Overwrite : Off

1 Select Overwrite, then press ENTER.

2 Turn Overwrite on or off, then press

ENTER.

Date:

09/11/03

21:03:56

00:00:11

Time:

Duration:

Quality:

Erase

Exil

Erasing a Title

Naming a Title

You can erase recorded titles from both

DVD+R and DVD+RW discs.

You can give your Title a name (up to 8

characters).

1 Select Erase, then press ENTER.

2 The selected title is deleted.

• After erasing a title from a DVD+R

discs, the erased space cannot be

utilized.

1 Select Title Name > Edit, then press

ENTER.

• The keypad appears.

Title Name

TITLE 02

Symbol

International

Back

Clear

Cancel

Flnish

2 Select the desired characters from the

keypad, pressing ENTER after each

entry.

3 When ﬁnished, select ”Finish”and

NOTE:

press ENTER.

• Be sure to ﬁnish all editing before

ﬁnalizing the disc.You cannot edit a

ﬁnalized disc..

4 - Operations

Channel Editing

About the Channel Editor

The DVD Recorder includes a special

Channel Editor that allows you to add,

delete, reorder, name, insert, or swap

channels while watching TV.

Move Up

CHANNEL EDITOR

Move Up

GCN NAME

009 000 ----

Move Down

Insert To...

Swap With...

Rename

010 000 ----

011 000 ----

012 000 ----

013 000 ----

014 000 ----

015 000 ----

EXIT

1 Press INPUT to select TV mode.

2 Press EDIT to display the Channel Edi-

tor menu.

Insert Channels

Add/Delete Channels

Allows you to manually add or remove

channels.

1 Use to select the channel you

wish to delete, and press ENTER.

2 To restore a deleted channel, select it

and press ENTER again.

Allows you to reinsert a channel any-

where in the channel list.

1 Use to select the channel you

wish to insert and press .

2 Press to select“Insert To...”and

press ENTER.

3 Use to enter the new Chan-

nel Number and press ENTER.

• The channel moves to the new posi-

tion.

Reorder Channels

Allows you to change the order of the

channels in your channel list.

1 Use to select the channel you

wish to move and press .

2 Press to select“Move Up”or

“Move Down”and press ENTER.

• The channel moves up or down the

list.

Swap Channels

Allows you to swap the TV channel order

stored in the DVD Recorder to match the

channel order stored in your TV set.

1 Use to select the channel to be

swapped and press .

2 Press to select“Swap With”and

Rename Channels

press ENTER.

Allows you to name your stored channels.

1 Use to select the channel you

wish to name and press .

2 Press to select“Rename” and

press ENTER.

3 Use to enter the new Chan-

nel Number and press ENTER.

• The channels will swap positions.

• Repeat as necessary.

• When ﬁnished, select Exit and press

ENTER.

• The character palette appears.

3 Use to select the desired

characters, pressing ENTER after each

entry.

4 When ﬁnished, select“Finish”and

press ENTER.

DVD Recorder User’s Guide

Formatting/Finalizing Discs

What is Formatting?

What is Finalizing?

•

Formatting completely erases a

DVD+RW so it can be recorded on

again.

•

Finalizing a DVD+R locks its record-

ings in place so the disc can be

played on most standard DVD players

or computers equipped with DVD-

ROM drives.

•

You cannot erase and reformat a

DVD+R disc.

Make sure you have safely backed

up your DVD+RW disc before refor-

matting because all contents will be

erased.

•

After you have ﬁnalized a DVD+R disc,

you cannot edit or record anything

else on that disc.

Finalizing is not necessary when us-

ing a DVD+RW disc.

Erasing a DVD+RW

To erase a DVD+RW disc:

Finalizing a DVD+R

To ﬁnalize a DVD+R disc:

1 Press GUIDER to display the Easy

Guider menu.

1 Press GUIDER to display the Easy

Guider menu.

2 Press to select“Erase”and then

press ENTER.

2 Press to select“Finalize”then

press ENTER.

Playback

Record

Playback

Record

Erase

EXIT

Erase

Finalize

EXIT

Finalize

3 Press ENTER again to conﬁrm that you

wish to erase and reformat the disc.

3 Press ENTER again to conﬁrm that you

wish to ﬁnalize the disc.

4 When the disc formatting process

is complete, press ENTER to exit the

Easy Guider.

• Finalizing can take up to 3-4 min-

utes depending on the type of disc,

how much is recorded on the disc,

and the number of titles on the disc.

4 When the disc ﬁnalization is com-

plete, press ENTER to exit the Easy

Guider.

4 - Operations

5^Help

This Chapter shows you how to get help, including

troubleshooting, customer support, and warranty

information.

DVD Recorder User’s Guide

Customer Support

The Troubleshooting section below will help you solve common issues with your DVD

Recorder. If you don’t ﬁnd the answers you need here, you can contact our Customer

Service Department as follows:

Phone

E-Mail

Web

(800) 736-7679

[email protected]

www.govideo.com

Troubleshooting

SYMPTOM

CAUSE

SOLUTION

No power.

The power cord is disconnected.

Plug the power cord into the rear

panel and wall outlet securely.

No picture.

The TV is not set to receive DVD

Recorder signal output.

Select the appropriate video input on

the TV so the picture from the DVD

Recorder appears on the TV screen.

The video cable is not connected

securely.

Connect the video cable securely.

The TV power is turned off.

Turn on the TV.

No sound.

The equipment connected with the

Select the correct input mode on the

audio cable is not set to receive DVD audio receiver so you can listen to

Recorder signal output.

the sound from the DVD Recorder.

The audio cables are not connected

securely.

Connect the audio cable securely.

The power of the equipment

connected with the audio cable is

turned off.

Turn on the equipment connected

with the audio cable.

The audio cables are damaged.

No disc is inserted.

Replace with new ones.

DVD Recorder does not start

playback.

Insert a disc. Check that the disc

indicator on the front panel display

is lit.

An unplayable disc is inserted.

Insert a playable disc. Check the disc

type, color system, and regional code.

The disc is placed upside down or is

not placed within the guide.

Place the disc with the playback side

down inside the guide.

The disc is dirty.

Clean the disc.

The Parental Control is set.

Cancel the Parental Control function

or change the rating level.

Picture from external input is

distorted

The video signal from the external

component is copy-protected.

Connect the component directly to

your TV.

Some channels are skipped over

when using CH 

The skipped channels were deleted

with the Add/Delete feature.

See“Add/Delete Channels”on page

27 or page 36.

5 - Help

Troubleshooting

SYMPTOM

CAUSE

SOLUTION

Picture or sound of broadcasting Antenna or cables are loose.

channel is weak or missing.

Tighten connections or replace cable.

Wrong TV Signal is selected in the

DVD Recorder Setup menu.

See“TV Signal”on page 27.

Camcorder image via A/V input

or DV IN to DVD Recorder is not

shown on TV screen.

Camcorder is off.

Turn camcorder on and operate

properly.

DVD Recorder’s input is not set to

AV1-Front, AV2-Rear, S-Video, or DV.

Press INPUT to select the correct

input.

Can’t play disc recorded on this

DVD Recorder on another DVD

player.

The DVD+R disc was not ﬁnalized.

Finalize the disc; see page 37.

Some players will not play even a

ﬁnalized disc.

No solution.

Cannot record or did not record

successfully.

The remaining blank space on the

disc is insufﬁcient.

Use another disc.

The source you are trying to record is You cannot record the source.

copy- protected.

When setting the recording channel, Select the channel on the DVD

the channel is tuned to the TV’s own Recorder’s built-in TV tuner.

tuner.

Timer Recording does not work.

DVD Recorder is not set to the

correct time.

Set date and time; see page 22.

Timer has been programmed

Reprogram Timer; see page 31.

incorrectly.TIMER indicator light does

not appear after programming timer.

DVD Recorder is on.

Turn off the DVD Recorder.

No solution.

Stereo Audio Recording and/or

Playback not present.

TV is not Stereo-compatible.

Broadcast program is not in stereo

format.

No solution.

DVD Recorder A/V Out jacks are not

connected to TV A/V In jacks.

Make A/V connections. Stereo is

available only via A/V output from

DVD Recorder.

DVD Recorder Audio/Video Out is not Select AUX or A/V source as TV input.

selected for viewing at the TV.

Remote control does not work

properly.

The remote control is not pointed

at the remote sensor of the DVD

Recorder.

Point the remote control at the

remote sensor of the DVD Recorder.

The remote control is too far from the Operate the remote control within

DVD Recorder.

10 ft (3 m).

There is an obstacle in the path of

the remote control and the DVD

Recorder.

Remove the obstacle.

The batteries in the remote control

are exhausted.

Replace the batteries with new ones.

DVD Recorder User’s Guide

Technical Speciﬁcations

General

Audio

Audio Formats

Dolby Digital

MPEG1

Power Supply

AC 100~240V, 50/60 Hz

Power Consumption 36 W

Operating Temp.

Operating Humidity

Dimensions (W/H/D) 420 x 66 x 268 mm

Multi-channel

2-channel

Multi-channel

2-channel

5~40°C (36°~104°F)

5~80% RH

MPEG2

PCM

Net Weight

2.8 kg

Tuner Signal

Tuner System

UHF/VHF/CATV

NTSC

Audio Performance

DA Converter

24-bit/192KHZ

AD Converter

≤24-bit

Signal-Noise (1kHz)

Dynamic Range (1kHz) ≥80dB

≥90dB

Connections

Front Panel

Ch. Separation (1kHz) ≥80dB

Video Input

RCA Connector (yellow) x1

RCA Connector (white/red) x1

Mini jack x1

THD (1kHz)

≤65dB

Audio L/R Input

IEEE 1394 Input

Video

Rear Panel

Video Input

Video Formats

RCA Connector (yellow) x1

RCA Connector (white/red) x1

4-Pin Mini DIN x1

RCA Connector (yellow) x1

RCA Connector (white/red) x1

4-Pin Mini DIN x1

•

MPEG2 for DVD+VR, DVD-Video, SVCD

Audio L/R Input

S-Video Input

Video Output

Audio L/R Output

S-Video Output

Component/

Prog. Scan Output

Digital Audio Output Coaxial x1

Optical x1

MPEG1 for DVD+VR,VCD

Video Performance

DA Converter

Composite Output

S-Video Output

10-bit/54MHz

1 Vp-p 75 Ohm

Y : 1 Vp-p 75 Ohm

C: 0.3 Vp-p 75 Ohm

Y : 1 Vp-p 75 Ohm

Pb : 0.7 Vp-p 75 Ohm

Pr : 0.7 Vp-p 75 Ohm

Y, Pb, Pr (Green/Blue/Red) x1

Component Output

Media

Video Resolution

•

Scan Frequency: 60Hz

Playable Media

Number of lines: 525 lines

DVD Video: 720x480

SVCD: 352x480

•

DVD-R/RW

DVD+R/RW

DVD-ROM

CD-R/RW

CD-ROM

VCD: 352x240

Video Recording Quality

Playable Formats

Mode Hrs

Bit Rate Encode Resolution

•

DVD-Video

9.5Mbps MPEG2

5.1Mbps MPEG2

2.5Mbps MPEG2

1.7Mbps MPEG1

720X480

352X480

352X240

DVD+VR

Video CD

Super VCD

Audio CD

MP3 (Max. ﬁles: 1000, 32~320 kbps)

JPEG (Max. ﬁles: 1000)

SLP

Recordable Media

•

DVD+R (DVD+VR Mode)

DVD+RW (DVD+VR Mode)

NOTE:

• Speciﬁcations and product design are

subject to change without notice.

5 - Help

Warranty

Other Warranty

Coverage

Commercial, Industrial or

Educational use has the

same warranty coverage as

stated in this warranty.

GoVideo Limited Warranty

Who Provides the Limited Warranty

During the warranty period, the GoVideo

Warranty Administrator will honor service for 90

days labor, 1 year parts from the original date of

consumer purchase. See below for Commercial,

Industrial or Educational use coverage. Remote

controls are warrantied for 90 days from the date

of purchase.

What are the Exceptions

This warranty does not cover: (1) Normal

maintenance service, such as cleaning. (2)

Damage from misuse, abuse neglect or

Who is Protected

This warranty protects the original consumer

owner of this GoVideo product.

accident, natural disasters or Acts of God. (3)

Cabinetry, decorative parts, A/C adapters, knobs

or buttons. (4) The foreign country use of this

product. (5) GoVideo product which has been

electronically or mechanically modiﬁed in any

way or incorporated into other products. (6)

Installation and setup service adjustments. (7)

Owner instruction.Your Owner’s Guide provides

information regarding operating instructions and

user controls. For additional information, contact

your authorized GoVideo dealer.

GoVideo is not responsible for any shipping, handling

or insurance charges.

This Exclusive Limited Warranty excludes all incidental

and consequential damages. Some states do not allow

the exclusion of incidental and consequential damages,

so the above exclusion may not apply to you.

What is Covered and How Long

This warranty covers internal operating parts

and service/labor to repair or replace covered

parts in this GoVideo product for 90 days labor,

1 year parts, from the date of purchase, deﬁned

as follows: (1) Original Consumer Retail Purchase;

(2) First Rental Purchase Agreement; or (3) First

Lease Purchase Agreement (the“Warranty

Period”). Labor and replacement parts supplied

during the Warranty Period are covered only for

the remaining portion of the original Warranty

Period.The GoVideo Warranty Administrator shall

have no liability for service under this warranty

if non-OEM (Original Equipment Manufacturer)

replacement parts are used in the repair of your

GoVideo product.

ALL IMPLIED WARRANTIES, INCLUDING IMPLIED

WARRANTIES OF MERCHANTABILITY AND

FITNESS FOR A PARTICULAR PURPOSE ARE

LIMITED IN DURATION TO THE DURATION OF THIS

WARRANTY PERIOD. Some states do not allow

limitations on how long an implied warranty lasts,

so the above limitation may not apply to you.

What the Owner Must Do If Service is

Required

Please contact our customer service department

at 1-800-736-7679 to repair or replace your

product, at GoVideo’s option, if it proves to be

defective in material or workmanship under

normal use, during the warranty period listed

above, effective from the date of original

consumer purchase of the product. Repaired

or replacement units are warrantied for the

remaining period of the original warranty. Please

retain dated sales receipt. Within the warranty

period, the customer pays for inbound shipping

charges and GoVideo pays return shipping

charges.

This Exclusive Limited Warranty gives you speciﬁc

legal rights and you may also have other rights

which vary from state to state.

GoVideo Warranty Administrator

7835 East McClain Drive

Scottsdale, Arizona 85260-1732

[email protected]

1-800-736-7679

DVD Recorder User’s Guide

Index

A-B Repeat 33

MP3 CD Playback 34

Technical Speciﬁcations 41

Time 22

Add/Delete Channels 27, 36

Angle 33

Aspect Ratio 24

Audio 33

Audio CD Playback 34

Audio Language 23

Audio Settings 26

AutoPlay 24

Auto Channel Search 27

Auto Chapter Marking 25

Title 33

Title Editing 35

Troubleshooting 39, 40

TV Signal 27

Naming a Title 35

TV Tuner Settings 27

OSD Language 23

Overwriting a Title 35

Unpacking 7

Parental Control 24

Password 24

Video Output 22

Photo CD Playback 34

Playback

Audio CD 34

DVD 32

DVD+R/+RW 32

MP3 34

Photo CD 34

Special Options 33

Playback Settings 24

Play Options 33

Protecting a Title 35

Channel Editor 36

Compatible Media 7

Connections

Warranty 42

Antenna/Basic Cable 13

Basic TV 15

Cable Box 14

Component Video 16

Digital Audio 17

External Device 18, 19

S-Video 16

YourDVD 24

Stereo 17

Customer Support 39

Rear Panel 10

Recording

Basic 29

External Source 30

Timer Recording 31

Record Quality 25

Record Settings 25

Remote Control 11

Rename Channels 36

Reorder Channels 36

Date 22

Digital Out 26

Disc Menu 33

Disc Menu Language 23

DTS Out 26

Editing 35

Erasing a Title 35

Safety Instructions 4, 5

Search 33

Setup Menu

Navigation 21

Overview 21

Sleep Timer 22

Slideshow Time 24

Slow Motion 33

Subtitle 33

Factory Settings 22

Finalizing 37

Formatting 37

Front Panel 8

Front Panel Display 9

Information 33

Insert Channels 36

Subtitle Language 23

Surround 26

Swap Channels 27, 36

System Settings 22

Language Settings 23

5 - Help

Fujitsu Mainboard D1561 User Manual
Electrolux Thermaline 9CHG584140 User Manual
Cisco Systems Cisco 7945g Unified Ip Phone CP7945G User Manual
Cannon 110cm Free Standing Gas Cooker C110DPX User Manual
BT 4100 SMS User Manual
Behringer PMX5000 User Manual
AT T 982 User Manual
Asus SABERTOOTH X79 P9X79EWS User Manual
Asus P5GD1 User Manual
Asus Computer Monitor VE247D User Manual