User Guide
VX730/930 Monitor
1 Using Your VX730 or VX930 Monitor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Setting up the monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Removing the base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Starting the monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Adjusting monitor settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
OSD options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Software controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Power management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
ENERGY STAR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Energy declaration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
No picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Picture is scrambled . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Display colors are wrong . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Picture is fuzzy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Picture bounces, jitters, or has waves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Picture has shadows or “ghosts” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Color is not uniform . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Image is not sized or centered correctly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Image cannot be adjusted full screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
VX730 specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
VX930 specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
A Safety, Regulatory, and Legal Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
i
Using Your VX730 or VX930
Monitor
Th e VX series m on itors are h igh -resolution
color m on itors with :
■
■
Un lim ited colors
Sm aller dot pitch for im proved im age
clarity
■
■
■
Excellen t con trast an d legibility
Im proved focus quality
Reduced power usage
Th e on -screen display (OSD) con trols let you
adjust a variety of im age settin gs.
1
Using Your VX730 or VX930 Monitor
Setting up the monitor
Settin g up th e m on itor con sists of two procedures: attach in g th e base an d con n ectin g th e
m on itor cables. If you are settin g up your com puter for th e first tim e, see th e setup poster
for m ore in form ation about con n ectin g addition al periph eral devices.
To attach the base:
1 Carefully set th e m on itor on its side with th e bottom of th e m on itor facin g you.
2 Hold th e base so th e roun ded en d is poin tin g toward th e back of th e m on itor, th en
align th e h ooks on th e bottom of th e base with th e correspon din g slots on th e bottom
of th e m on itor.
Retaining latch
3 Slide th e base toward th e fron t of th e m on itor so all h ooks are securely in place. Th e
retain in g latch clicks in to place wh en th e base is attach ed correctly.
4 Carefully set th e m on itor uprigh t an d place it on a sturdy, level surface.
2
Setting up the monitor
To connect the power and video cables:
1 Position th e m on itor an d your com puter so you can easily get at th e back pan el of
each . Make sure th at all power cables can reach a correctly groun ded electrical outlet.
2 Con n ect th e video cable to th e m atch in g (blue) video port on th e back of your
com puter.
3 Tigh ten th e screws on th e video cable con n ectors to keep th em from com in g loose.
Tigh ten in g th e screws also preven ts radio an d TV in terferen ce.
3
Using Your VX730 or VX930 Monitor
4 Con n ect th e power cord th at cam e with th e m on itor to th e AC power con n ector at
th e back of th e m on itor. To m ain tain FCC stan dards, on ly use th e cord th at cam e
with th e m on itor.
5 Plug th e oth er en d of th e power cord in to a correctly groun ded electrical outlet.
4
Setting up the monitor
Removing the base
To remove the base:
1 Turn off your com puter, th en discon n ect th e m on itor’s power cable.
2 Carefully set th e m on itor on its side with th e bottom of th e m on itor facin g you.
3 Rotate th e base so you can easily get to th e retain in g latch on th e bottom of th e
m on itor, th en press in th e retain in g latch .
4 Wh ile pressin g in th e latch , slide th e base toward th e back of th e m on itor, th en rem ove
th e base.
5
Using Your VX730 or VX930 Monitor
Starting the monitor
To start the monitor:
1 Press an d h old th e power button for approxim ately on e secon d. Th e power LED turn s
on , an d th e m on itor dem agn etizes itself for about five secon ds.
Left
arrow
Select
button
Power
button
Menu
button
Right
arrow
Power
LED
6
Starting the monitor
Caution
Do not store tapes or diskettes next to the monitor because the
monitor generates a strong magnetic field during startup. This field
can erase or damage data stored on magnetic tapes or diskettes.
2 Turn on your com puter.
3 After your com puter is run n in g, th e power LED on th e m on itor sh ould be green . If
n ot, ch eck th e con n ection s. For m ore troublesh ootin g in form ation , see
“Troublesh ootin g” on page 16.
4 Adjust th e con trols to get th e ideal im age size an d position for you. For m ore
in form ation , see “Adjustin g m on itor settin gs” on page 8.
7
Using Your VX730 or VX930 Monitor
Adjusting monitor settings
Th is m on itor features an on -screen display (OSD) th at lets you adjust an d save con trast,
brigh tn ess, an d oth er settin gs for th e display im age.
■
■
Men u . Press to view th e OSD. Press again to exit.
(left). Press to m ove between th e OSD option s. After selectin g an option , use to
adjust th e settin g.
■
■
(righ t). Press to m ove between th e OSD option s. After selectin g an option , use
to adjust th e settin g.
Select. Press to select an OSD option .
Th e m on itor saves an y ch an ges you m ake to th e settin gs, even if you turn off th e m on itor.
To adjust the monitor settings:
1 Press th e Menu button . Th e OSD m en u open s.
2 Use th e
an d
button s to h igh ligh t a m en u option .
3 Press th e Select button to select th e h igh ligh ted m en u option , th en use th e
an d button s to adjust it.
4 Press th e Select button to return to th e Main m en u.
5 Wh en you h ave fin ish ed m akin g all adjustm en ts, press th e Menu button to exit th e
OSD.
8
Adjusting monitor settings
OSD options
Main menu Option
Contrast. Increases or decreases display image contrast.
Brightness. Increases or decreases display image brightness.
Horizontal Position (H Position). Moves the display image to the
left or right side of the screen.
Horizontal Size (H Size). Increases or decreases the width of the
display image.
Vertical Position (V Position). Moves the display image to the top
or bottom of the screen.
Vertical Size (V Size). Increases or decreases the height of the
display image.
Tilt. Rotates the display image.
Pincushion. Curves the sides of the display image inward or outward.
Pin Balance. Curves the display image to the left or right.
Parallelogram. Slants the display image to the left or right.
Trapezoid. Increases or decreases the trapezoid distortion of the
display image.
9
Using Your VX730 or VX930 Monitor
Main menu Option
Top corner. Curves the sides of the top of the display image inward
or outward.
Bottom corner. Curves the sides of the bottom of the display image
inward or outward.
Horizontal Moire (H Moire). Blurs the focus to minimize the
horizontal line pattern which results from interference.
Vertical Moire (V Moire). Blurs the focus to minimize the vertical line
pattern which results from interference.
Horizontal Convergence (VX930 only). Aligns the monitor’s color
signals to eliminate ghosted images.
Color. Adjusts color balance.
Recall. Resets the monitor settings to the factory default settings.
Language. Changes the display language for the OSD control
system.
OSD Time. Adjusts the on-screen display time-out.
OSD
Degauss. Demagnetizes the screen.
Information. Displays the frequency and resolution in which the
monitor is currently operating.
Exit (VX730 only). Closes the OSD menu.
- OR -
Press the Menu button on both models to exit the OSD.
10
Adjusting monitor settings
Software controls
Adjustin g th e color depth an d screen resolution are two of th e m ost basic m on itor settin gs
you m ay n eed to ch an ge.
Adjusting the color depth
Color depth is th e n um ber of colors th e video card uses. Most im ages look best displayed
with th e m axim um n um ber of colors available.
Win dows lets you ch oose from several color depth settin gs for th e m on itor. We recom m en d
th at you use th e 32-bit True Color settin g or th e h igh est settin g available at all tim es.
If th e color in your im ages seem s “false” or “jum py,” especially after you h ave played a
gam e or run a video-in ten sive program , ch eck th e color depth settin g an d return it to 32-bit
True Color, if n ecessary.
To change the color depth:
1 Click Start, th en click Control Panel. Th e Control Panel win dow open s. If your Con trol
Pan el is in Category View, click Appearance and Themes.
2 Click/Double-click th e Display icon . Th e Display Properties dialog box open s.
3 Click th e Settings tab.
11
Using Your VX730 or VX930 Monitor
4 Click th e arrow button to open th e Color quality list, th en click th e color depth you
wan t.
5 To save your ch an ges, click OK, th en click Yes.
Help and
Support
For more information about adjusting display settings, click Start, then
click Help and Support. Type the keyword ch an gin g d isplay
settin gs in the Search box
, then click the
arrow.
Adjusting the screen resolution
You can ch an ge th e screen resolution to a size you prefer. For exam ple, you can in crease
th e resolution to fit m ore icon s on your desktop, or you can decrease th e resolution to
m ake readin g an d iden tifyin g objects on th e m on itor easier. Th e h igh er th e resolution ,
th e sm aller in dividual com pon en ts of th e screen (such as icon s an d m en u bars) appear.
To change the screen resolution:
1 Click Start, th en click Control Panel. Th e Control Panel win dow open s. If your Con trol
Pan el is in Category View, click Appearance and Themes.
2 Double-click th e Display icon . Th e Display Properties dialog box open s.
12
Adjusting monitor settings
3 Click th e Settings tab.
4 Drag th e Screen resolution slider to th e size you prefer.
5 To save your ch an ges, click OK, th en click Yes.
Help and
Support
For more information about adjusting screen resolution, click Start,
then click Help and Support. Type the keyword ch an gin g screen
resolu tion in the Search box
, then click the
arrow.
13
Using Your VX730 or VX930 Monitor
Power management
ENERGY STAR
As an ENERGY STAR® Partn er, Gateway h as determ in ed th at th is product m eets th e
ENERGY STAR guidelin es for en ergy efficien cy.
Th is m on itor com plies with th e EPA's In tern ation al ENERGY STAR Program , wh ich is a
program design ed to en courage m an ufacturers of com puter equipm en t to build circuitry
in to th eir products to reduce en ergy con sum ption durin g tim e of n on -use.
Energy declaration
Wh en con n ected to a com puter th at supports th e Display Power Man agem en t Sign alin g
(DPMS) Protocol, th is m on itor can con serve sign ifican t en ergy by reducin g power
con sum ption durin g periods of n on -use. Wh en your com puter goes in to th e en ergy savin g
m ode, th e m on itor will th en en ter th e Active Off m ode (differen t from total sh ut down ).
In th e Active Off m ode th e power LED will still sh ow am ber.
Use th ese con ven tion s an d th e power can be reduced to th e followin g levels:
State
LED color
Power consumption
On
Green
VX730: 80 W
VX930: 103 W (1600 × 1200 @ 75 Hz,
window=normal × 64%,
2
brightness=100cd/m )
Sleep
Orange
Orange
Less than or equal to 4 W
Less than or equal to 2 W
Active Off
To “wake” th e m on itor wh en it is in Active Off m ode, m ove your m ouse or press an y
keyboard key.
Access th e power m an agem en t option s in th e Con trol Pan el to ch an ge th e period of tim e
after wh ich th e m on itor en ters th ese low power states.
14
Maintenance
Maintenance
To keep th e m on itor in optim al workin g order:
■
■
■
■
■
■
Do n ot block th e ven tilation h oles.
Do n ot expose th e m on itor to rain or use n ear water.
Keep th e m on itor away from radiators or h eat ven ts.
Keep th e m on itor out of direct sun ligh t.
Keep th e m on itor away from an y equipm en t th at gen erates a m agn etic field.
Use a screen saver to avoid perm an en t ph osph or discoloration . For m ore in form ation
about screen savers, see th e docum en tation th at cam e with your com puter.
■
Clean th e m on itor usin g a soft cloth ligh tly m oisten ed with water. Wipe th e cabin et,
glass pan el, an d con trols.
Caution
Do not use any type of abrasive pad or glass cleaner. You will
permanently scratch the glass panel.
15
Using Your VX730 or VX930 Monitor
Troubleshooting
If you h ave problem s with th e m on itor, th e in form ation in th is troublesh ootin g section
m ay h elp you solve th em .
Important
Make sure that the monitor has warmed up for about 30 minutes
before making any judgments about the picture quality.
■
Make sure th at th e m on itor is turn ed on .
■
an d th e wall outlet. For m ore in form ation about con n ectin g th e power cord, see
“Settin g up th e m on itor” on page 2.
■
■
Make sure th at th e video cable is con n ected securely to th e back of your com puter.
For m ore in form ation about con n ectin g th e video cable, see “Settin g up th e m on itor”
on page 2.
If th e power LED is am ber or blin kin g am ber:
■
■
Make sure th at your com puter is turn ed on .
Move th e m ouse or press an y key on th e keyboard to brin g th e m on itor out of
Active Off m ode.
■
■
■
Restart your com puter with th e m on itor turn ed on .
Make sure th at th e video cable is n ot dam aged.
Ch eck th e video port an d th e en d of th e video cable for an y pin s th at m igh t be
ben t or push ed in .
■
Turn off th e m on itor an d un plug th e video cable from th e back of your com puter.
Turn th e m on itor back on an d wait for ten secon ds. If th e m on itor is fun ction in g
correctly, a self-diagn ostic screen appears.
16
Troubleshooting
Picture is scrambled
If th e picture is scram bled or does n ot look righ t, you can reset th e m on itor to its default
video m ode an d resolution settin gs.
To reset the monitor settings:
1 Restart your com puter, th en press an d h old F8 wh ile your com puter is startin g up.
2 Select Safe Mode or Enable VGA Mode, th en press Enter. Your com puter restarts.
3 Click Start, th en click Control Panel. If your Con trol Pan el is in Category View, click
Appearance and Themes.
4 Click/Double-click th e Display icon . Th e Display Properties dialog box open s.
5 Click th e Settings tab.
6 Drag th e Screen Resolution slider to th e size you prefer. If you are n ot sure wh at
resolution to use, select 800 × 600.
7 To save your ch an ges, click OK, th en click Yes.
8 If prom pted, restart your com puter.
Th e m ode you h ave ch osen sh ould allow you to use your com puter or select a differen t
resolution or n um ber of colors (select th e m axim um n um ber possible). If th e settin gs
selected are beyon d th e m on itor’s display capabilities, th e operatin g system restores
th e im age back to th e last saved settin gs in 15-20 secon ds.
■
Restart your com puter with th e m on itor turn ed on .
■
Make sure th at th e video cable is con n ected securely to th e back of your com puter.
For m ore in form ation about con n ectin g th e video cable, see “Settin g up th e m on itor”
on page 2.
■
■
Make sure th at th e video cable is n ot dam aged.
Ch eck th e video port an d th e en d of th e video cable for an y pin s th at m igh t be ben t
or push ed in .
Picture is fuzzy
Adjust th e con trast an d brigh tn ess con trols to im prove th e display im age. For m ore
in form ation , see “Adjustin g m on itor settin gs” on page 8.
17
Using Your VX730 or VX930 Monitor
Picture bounces, jitters, or has waves
Make sure th at:
■
■
Non -sh ielded speakers are n ot placed too close to th e m on itor.
Th e m on itor is n ot position ed too close to an oth er m on itor, power tran sform er or
adapter, electric fan , fluorescen t ligh t, m etal sh elf, or laser prin ter.
If n on e of th ese suggestion s solves th e problem , try pluggin g th e m on itor in to an oth er
outlet, preferably on e on a differen t circuit.
■
Rem ove an y exten sion cables or switch boxes.
■
Make sure th at th e video cable is con n ected securely to th e back of your com puter.
For m ore in form ation about con n ectin g th e video cable, see “Settin g up th e m on itor”
on page 2.
■
■
Make sure th at th e video cable is n ot dam aged.
Ch eck th e video port an d th e en d of th e video cable for an y pin s th at m igh t be ben t
or push ed in .
Color is not uniform
Make sure th at th e m on itor warm s up for at least 30 m in utes before m akin g a fin al
judgm en t about color un iform ity.
Make sure th at:
■
■
Non -sh ielded speakers are n ot placed too close to th e m on itor.
Th e m on itor is n ot position ed too close to an oth er m on itor, power tran sform er or
adapter, electric fan , fluorescen t ligh t, m etal sh elf, or laser prin ter.
■
You dem agn etize th e screen usin g th e Degauss feature in th e OSD. For in struction s
Image is not sized or centered correctly
Use th e size an d position con trols to adjust th e im age. For in struction s on h ow to ch an ge
th e m on itor settin gs, see “Adjustin g m on itor settin gs” on page 8.
18
Troubleshooting
Image cannot be adjusted full screen
Som e video m odes used by th e m on itor produce im ages th at can n ot be adjusted all th e
way out to th e bezel edge (th e edge wh ere th e screen glass an d m on itor casin g m eet).
Th is con dition does n ot in dicate th at th e m on itor is defective.
19
Using Your VX730 or VX930 Monitor
VX730 specifications
Specification s are subject to ch an ge with out n otice or obligation .
17 inches diagonal (16.0 inches viewable),
anti-reflective/anti-glare, 90° deflection, 0.25 mm dot pitch
CRT
1280 × 1024 non-interlaced
Unlimited
Maximum resolution
Display colors
Horizontal, 30-85 kHz
Vertical, 59-160 Hz
Frequency range
AC 100-240 V 50/60 Hz 2A
Power input
UL, CSA, cUL, NOM, EPA, DHHS, and FCC Class B
Certifications
Meets International ENERGY STAR requirements:
Active Off mode = less than or equal to 8 W
Power management
Operating temperature: 41° to 104°F (5° to 40°C)
Operating humidity: 5% to 90%
Environment
Man y products for Gateway an d its subsidiaries are custom en gin eered by our suppliers
to Gateway specification s an d m ay vary with sim ilarly m arketed products.
20
VX930 specifications
VX930 specifications
Specification s are subject to ch an ge with out n otice or obligation .
19 inches diagonal (18.0 inches viewable),
anti-reflective/anti-glare, 90° deflection, 0.25 mm dot pitch
CRT
1600 × 1200 non-interlaced
Maximum resolution
Display colors
Unlimited
Horizontal, 30-96 kHz
Vertical, 59-160 Hz
Frequency range
AC 100-240 V 50/60 Hz 2A
Power input
UL, CSA, cUL, NOM, EPA, DHHS, and FCC Class B
Certifications
Meets International ENERGY STAR requirements:
Active Off mode = less than or equal to 4 W
Power management
Operating temperature: 41° to 104°F (5° to 40°C)
Operating humidity: 5% to 90%
Environment
Man y products for Gateway an d its subsidiaries are custom en gin eered by our suppliers
to Gateway specification s an d m ay vary with sim ilarly m arketed products.
21
Important safety information
Your Gateway system is design ed an d tested to m eet th e latest stan dards for safety of in form ation tech n ology
equipm en t. However, to en sure safe use of th is product, it is im portan t th at th e safety in struction s m arked on th e
product an d in th e docum en tation are followed.
Warning
Always follow these instructions to help guard against personal injury
and damage to your Gateway system.
Setting up your system
■
Read an d follow all in struction s m arked on th e product an d in th e docum en tation before you operate your
system . Retain all safety an d operatin g in struction s for future use.
■
■
■
■
Do n ot use th is product n ear water or a h eat source such as a radiator.
Set up th e system on a stable work surface.
Th e product sh ould on ly be operated from th e type of power source in dicated on th e ratin g label.
If your product h as a voltage selector switch , m ake sure th at th e switch is in th e proper position for your area.
Th e voltage selector switch is set at th e factory to th e correct voltage.
■
■
Open in gs in th e m on itor case are provided for ven tilation . Do n ot block or cover th ese open in gs. Make sure
you provide adequate space, at least 6 in ch es (15 cm ), aroun d th e system for ven tilation wh en you set up your
work area. Never in sert objects of an y kin d in to th e m on itor ven tilation open in gs.
Som e products are equipped with a th ree-wire power cord to m ake sure th at th e product is properly groun ded
wh en in use. Th e plug on th is cord will on ly fit in to a groun din g-type outlet. Th is is a safety feature. If you are
un able to in sert th e plug in to an outlet, con tact an electrician to in stall th e appropriate outlet.
■
■
If you use an exten sion cord with th is system , m ake sure th at th e total am pere ratin g on th e products plugged
in to th e exten sion cord does n ot exceed th e exten sion cord am pere ratin g.
If your system is fitted with a TV Tun er, cable, or satellite receiver card, m ake sure th at th e an ten n a or cable
system is electrically groun ded to provide som e protection again st voltage surges an d buildup of static ch arges.
24
Care during use
■
Do n ot walk on th e power cord or allow an yth in g to rest on it.
■
Do n ot spill an yth in g on th e system . Th e best way to avoid spills is to avoid eatin g an d drin kin g n ear your
system .
■
Do n ot expose th e m on itor to rain or use n ear water. If th e m on itor does get exposed to m oisture, un plug it
an d allow it to dry for 24 h ours. Call Gateway Tech n ical Support for advice on wh eth er th e m on itor is safe to
turn back on .
■
■
Wh en th e m on itor is turn ed off, a sm all am oun t of electrical curren t still flows th rough th e m on itor. To avoid
electrical sh ock, always un plug all power cables an d m odem cables from th e wall outlets before clean in g th e
system .
Un plug th e system from th e wall outlet an d refer servicin g to qualified person n el if:
■
Th e power cord or plug is dam aged.
■
Liquid h as been spilled in to th e system .
■
Th e system does n ot operate properly wh en th e operatin g in struction s are followed.
■
Th e system was dropped or th e cabin et is dam aged.
■
Th e system perform an ce ch an ges.
Warning
To prevent electric shock, never remove the cover. No user
serviceable parts inside. Refer servicing to qualified service
personnel.
Replacement parts and accessories
Use on ly replacem en t parts an d accessories recom m en ded by Gateway.
Warning
Do not use Gateway products in areas classified as hazardous
locations. Such areas include patient care areas of medical and
dental facilities, oxygen-laden environments, or industrial facilities.
25
Regulatory compliance statements
United States of America
Federal Communications Commission (FCC) Unintentional emitter per FCC Part 15
Th is device h as been tested an d foun d to com ply with th e lim its for a Class B digital device, pursuan t to Part 15
of th e FCC rules. Th ese lim its are design ed to provide reason able protection again st h arm ful in terferen ce in a
residen tial in stallation . Th is equipm en t gen erates, uses, an d can radiate radio frequen cy en ergy an d, if n ot
in stalled an d used in accordan ce with th e in struction s, m ay cause h arm ful in terferen ce to radio or television
reception . However, th ere is n o guaran tee th at in terferen ce will n ot occur in a particular in stallation . If th is
equipm en t does cause in terferen ce to radio an d television reception , wh ich can be determ in ed by turn in g th e
equipm en t off an d on , th e user is en couraged to try to correct th e in terferen ce by on e or m ore of th e followin g
m easures:
■
Reorien t or relocate th e receivin g an ten n a
■
In crease th e separation between th e equipm en t an d receiver
■
Con n ect th e equipm en t to an outlet on a differen t circuit from th at to wh ich th e receiver is con n ected
■
Con sult th e dealer or an experien ced radio/TV tech n ician for h elp.
Com plian ce Accessories: Th e accessories associated with th is equipm en t are: sh ielded video cable. Th ese
accessories are required to be used in order to en sure com plian ce with FCC rules.
FCC declaration of conformity
Resp on sible p arty:
Gateway Com pan ies, In c.
610 Gateway Drive, North Sioux City, SD 57049
(605) 232-2000 Fax: (605) 232-2023
Th is device com plies with Part 15 of th e FCC Rules. Operation of th is device is subject to th e followin g two
con dition s: (1) th is device m ay n ot cause h arm ful in terferen ce, an d (2) th is device m ust accept an y in terferen ce
received, in cludin g in terferen ce th at m ay cause un desired operation .
Caution
Changes or modifications not expressly approved by Gateway could
void the FCC compliance and negate your authority to operate the
product.
California Proposition 65 Warning
Warning
This product contains chemicals, including lead, known to the State
of California to cause cancer, birth defects or reproductive harm.
26
Canada
Industry Canada (IC) Unintentional emitter per ICES-003
Th is digital apparatus does n ot exceed th e Class B lim its for radio n oise em ission s from digital apparatus as set
out in th e radio in terferen ce regulation s of In dustry Can ada.
Le présen t appareil n um érique n ’ém et pas de bruits radioélectriques dépassan t les lim ites applicables aux
appareils n um ériques de Classe B prescrites dan s le règlem en t sur le brouillage radioélectrique édicté par In dustrie
Can ada.
EPA ENERGY STAR
®
As an ENERGY STAR Partn er, Gateway h as determ in ed th at th is product m eets th e ENERGY
STAR guidelin es for en ergy efficien cy wh en used with a com puter equipped with a Display Power
Man agem en t System .
ENERGY STAR
27
Notices
Copyright © 2004 Gateway, Inc.
All Rights Reserved
14303 Gateway Place
Poway, CA 92064 USA
All Rights Reserved
This publication is protected by copyright and all rights are reserved. No part of it may be reproduced or transmitted by any
means or in any form, without prior consent in writing from Gateway.
The information in this manual has been carefully checked and is believed to be accurate. However, changes are made
periodically. These changes are incorporated in newer publication editions. Gateway may improve and/or change products
described in this publication at any time. Due to continuing system improvements, Gateway is not responsible for inaccurate
information which may appear in this manual. For the latest product updates, consult the Gateway Web site at
www.gateway.com. In no event will Gateway be liable for direct, indirect, special, exemplary, incidental, or consequential
damages resulting from any defect or omission in this manual, even if advised of the possibility of such damages.
In the interest of continued product development, Gateway reserves the right to make improvements in this manual and the
products it describes at any time, without notices or obligation.
Trademark Acknowledgments
Gateway and the Black-and-White Spot Design are trademarks or registered trademarks of Gateway, Inc. in the U.S. and
other countries. SpotShop, Spotshop.com, and Your:)Ware are trademarks of Gateway, Inc. Intel, Intel Inside logo, and
Pentium are registered trademarks and MMX is a trademark of Intel Corporation. Microsoft, MS, MS-DOS, and Windows are
trademarks or registered trademarks of Microsoft Corporation. All other product names mentioned herein are used for
identification purposes only, and may be the trademarks or registered trademarks of their respective companies.
28
MAN VX730/930 USR GDE R2 12/04
|