SETTING UP YOUR GATEWAY MONITOR
1
Connect your monitor to your computer
2
Plug in the monitor
3
Turn on the monitor
Follow the instructions that came with your computer.
To protect your monitor from power fluctuations,
use a surge protector.
Getting Help
See your documentation
Analog VGA
Digital DVI
(optional*)
Refer to the documentation that came with your monitor
or go to gateway.com to get the online documentation.
(supplied)
Check Gateway Support
For frequently-asked questions, setup help, and
immediate information on common technical issues,
go to gateway.com
Connecting Your Flat Panel LCD Speaker Bar*
1 Tilt the screen back, center the speaker bar below
2 Connect the USB power cord to a
3 Connect the speaker bar’s headphone and microphone
the screen, then tighten the thumb screws.
USB port on your computer.
cables to your computer, then turn on the speaker.
MAN FPD2085/2185 POSTER R2 12/05
|