GE Profile JP938 User Manual

TM  
JP938BC/CC/SC/WC—GE Profile 30" Built-In CleanDesign Electric Cooktop  
Counter Installation (in inches)  
Cooktop Dimensions (in inches)  
KW Rating  
240V  
8.1  
6.1  
20-7/8**  
29-3/4**  
Cooktop  
3-1/4*  
208V  
13" MAX.  
depth  
Breaker Size  
28-1/8  
19-3/8  
40 Amps  
Note: Check local codes for required breaker size  
19-5/8  
Note: If installing with a GE Profile Performanceor GE ProfileTelescopic Downdraft  
System, consult both cooktop and downdraft installation instructions packed with product  
before installing. Cooktop gas/electric supply may need  
30" MIN. to  
unprotected  
cabinet  
1-1/2" MIN.  
clearance to  
side wall  
18" MIN.  
to cabinet  
28-1/2  
1-3/4" to  
rear wall  
from cut-out  
to be re-routed to install downdraft.  
Note: Consult cabinet and countertop manufacturers specs for flush mount installation  
prior to install.  
2-1/2"  
Installation Information: Requires a 5" free area between the bottom of the  
Required  
cooktop to any combustible material, i.e., shelving. Free area not required when installing wall  
oven underneath cooktop. Refer to installation instructions. Requires an 18" minimum from  
cooktop to adjacent overhead cabinets. Units are furnished with a 48" flexible armored cable.  
*Depth of unit at conduit location (rear) is 6-1/4"  
1-3/4" MIN.  
clearance to  
side wall  
**Stainless steel cooktop dimensions are  
29-7/8" (width) and 21" (depth)  
Before installing, consult installation instructions packed with product for current  
dimensional data. 36" Ribbon cooktops are approved for use over GE 30" Single Wall Ovens  
only. 30" Ribbon cooktops are approved for use over select GE 29" and GE 30" Single Wall  
Ovens. Refer to cooktop and wall oven installation instructions packed with product for  
current dimensional data.  
from cut-out  
Electrical junction  
box 16" MIN.  
below countertop  
Cut should  
not interfere  
with cabinet  
structure at  
front  
Filler Trim Kit  
When replacing an old GE 30" cooktop (with larger opening) with Models  
JP938/930/350/340, use the following one-piece trim kit to fill in the over-size hole.  
Available at additional cost.  
JXTR31W (True White)  
JXTR31B (Black glass with black, white or bisque pattern)  
Flush Mount Installation Kit  
Accommodates both 30" and 36" installations. Not for use with stainless steel models.  
JXFLMTW (True white glass)  
JXFLMBB (Black glass with black, white or bisque pattern)  
®
For answers to your Monogram, GE Profile or  
GE appliance questions, visit our website at  
WWW.GEAppliance.com or call  
Listed by  
Underwriters  
Laboratories  
R
®
Specification Revised 3/01  
GE Answer Center service, 800.626.2000.  

GE 27906 User Manual
Fairchild 2N4123 User Manual
Eizo EIZO FlexScan L367 User Manual
Dell E1909WDD User Manual
Cisco Systems IPS4360 User Manual
BT Hub Phone 1010 User Manual
Asus PREMIUM P5N72 T User Manual
ASA Electronics AOM 7694 User Manual
Arcam Amplifiers P90 User Manual
APC 78 10169 02 User Manual