GE PP950BM User Manual

PP950WM/BM  
GE Profile30" Built-In CleanDesign Electric Cooktop  
Note: Check local codes for required breaker size  
13" MAX.  
depth  
21-3/8  
29-3/4  
KW Rating  
3-1/4*  
Important: Requires a 5” free area between  
the bottom of the cooktop to any combustible  
material, i.e., shelving. Free area not required  
when installing wall oven underneath cooktop.  
Refer to installation instructions. Requires a  
15” minimum from cooktop to adjacent  
overhead cabinets. Units are furnished with  
a 48” flexible armored cable.  
Cooktop  
7.4  
5.6  
240V  
208V  
30" MIN. to  
unprotected  
cabinet  
Breaker Size  
19-5/8  
40 Amps†  
30 Amps†  
1-1/2 MIN.  
"
240V  
208V  
15" MIN.  
to cabinet  
clearance to  
side wall  
28-1/2  
1-3/4  
rear wall  
"
to  
from cut-out  
Note: 30” Ribbon cooktops are approved for use over select GE 30” Single  
Wall Ovens and Warming Drawers. All 30" ribbon cooktops can be installed  
over 27" wall ovens and warming drawers. Refer to cooktop and wall oven/  
warming drawer installation instructions packed with product for current  
dimensional data. If installed with a GE ProfileTelescopic Downdraft System,  
consult both the cooktop and downdraft installation instructions packed  
with product before installing. Cooktop gas/electric supply may need to be  
re-routed to install downdraft. The countertop must be at least 26" deep with  
a flat surface area of 23-1/2" or more, front to back. In addition, other  
clearances to the front edge of the countertop must be considered.  
Consult cabinet and countertop manufacturer’s specs for flush mount  
installation prior to install. Before installing, consult installation  
instructions packed with product for current dimensional data.  
2-1/2**  
Required  
1-1/2 MIN.  
"
*Depth of unit at conduit connection location (rear) is  
6-1/2" on models PP980/975/950/945 and 4-5/8"  
on models PHP900/PP972/962/942/932/912,  
JP655/356/346.  
clearance to  
side wall  
from cut-out  
Cut should  
not interfere  
with cabinet  
structure  
**Raised bull nose countertops may require up to  
3/8" additional clearance to prevent interference  
with curved front.  
Electrical junction box 16" MIN.  
below countertop  
at front  
For answers to your Monogram,® GE Profileor  
GE® appliance questions, visit our website at  
ge.com or call GE Answer Center® service,  
800.626.2000.  
Listed by  
Underwriters  
Laboratories  
220597  
Specification Revised 12/07  

Hanns G HW222 User Manual
Grundig DIGI 100 SERVICE MANUAL CUC 1834 User Manual
GE 25951 Series User Manual
Elo TouchSystems Elo Entuitive 3000 Series 1522L User Manual
Compaq 5800 User Manual
ClearOne comm CHATTM 150 User Manual
Brother HL 5130 User Manual
Bosch Appliances NKT 72 User Manual
AMD GA K8NSC 939 User Manual
Acnodes APW 5320 User Manual