PHP900DM
GE Profile™ 30" Electric Induction Cooktop
Dimensions and Installation Information (in inches)
†Note: Check local codes for required breaker size
13" MAX.
depth
21-3/8
KW Rating
29-3/4
Important: Requires a 5" free area between
3-1/4*
Cooktop
8.6
6.5
240V
208V
the bottom of the cooktop to any combustible
material, i.e., shelving. Free area not required
when installing wall oven underneath cooktop.
Refer to installation instructions. Requires a
15" minimum from cooktop to adjacent
overhead cabinets. Units are furnished with
a 36" flexible armored cable.
Breaker Size
30" MIN. to
unprotected
cabinet
19-5/8
40 Amps†
40 Amps†
240V
208V
1-1/2 MIN.
"
15" MIN.
to cabinet
clearance to
side wall
28-1/2
1-3/4
rear wall
"
to
from cut-out
Note: 36" Ribbon cooktops are approved for use over GE 30" Single Wall
Ovens and Warming Drawers only. Refer to cooktop and wall oven/
warming drawer installation instructions packed with product for current
dimensional data. If installed with a GE Profile™ Telescopic Downdraft System,
consult both the cooktop and downdraft installation instructions packed with
product before installing. Cooktop gas/electric supply may need to be
re-routed to install downdraft. The countertop must be at least 26" deep
with a flat surface area of 23-1/2" or more, front to back. In addition,
other clearances to the front edge of the countertop must be considered,
especially on raised bullnose countertops. Consult cabinet and countertop
manufacturer’s specs for flush mount installation prior to install.
2-1/2**
Required
1-1/2 MIN.
"
*Depth of unit at conduit connection location (rear) is
6-1/2" on models PP980/950 and 4-5/8" on models
PHP900/PP975/972/962/945/942/932/912,
JP655/356/346.
clearance to
side wall
from cut-out
Cut should
not interfere
with cabinet
structure
**Raised bull nose countertops may require up to
3/8" additional clearance to prevent interference
with curved front.
Electrical junction box 16" MIN.
below countertop
at front
Installation Information: Before installing, consult installation instructions
packed with product for current dimensional data.
For answers to your Monogram,® GE Profile™ or
GE® appliance questions, visit our website at
ge.com or call GE Answer Center® service,
800.626.2000.
Listed by
Underwriters
Laboratories
220580
Specification Revised 9/07
|