GE DECT6 0 28127 User Manual

Model 28127 Series  
DECT6.0 Cordless Handset  
Speakerphone  
User’s Guide  
Your new GE telephone system is EXPANDABLE up to a total of 7 handsets (by  
purchase of optional Model 28107 handset with charge cradle)  
The telephone company may make changes in its communications facilities, equipment,  
operations or procedures where such action is required in the operation of its business. If these  
changes are expected to affect the use or performance of your telephone equipment, the  
telephone company will likely give you adequate notice to allow you to maintain uninterrupted  
service.  
Notice must be given to the telephone company upon termination of your telephone from your  
line.  
REN Number  
On the bottom of this equipment is a label indicating, among other information, the Ringer  
Equivalence Number (REN) for the equipment.  
The REN is useful in determining the number of devices you may connect to your telephone line  
and still have all of these devices ring when your telephone number is called. In most (but not  
all) areas, the sum of the RENs of all devices connected to one line should not exceed 5.  
To be certain of the number of devices you may connect to your line as determined by the REN,  
you should contact your local telephone company.  
REN Number is located on the cabinet bottom.  
Hearing Aid Compatibility (HAC)  
This telephone system meets FCC standards for Hearing Aid Compatibility.  
Licensing  
Licensed under US Patent 6,4ꢀ7,009.  
FCC RF Radiation Exposure Statement  
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled  
environment. This equipment should be installed and operated with a minimum distance of ꢀ0  
centimeters between the radiator and your body. This transmitter must not be co-located or  
operated in conjunction with any other antenna or transmitter.”  
For body worn operation, this phone has been tested and meets the FCC RF exposure  
guidelines when used with the belt clip supplied with this product. Use of other accessories  
may not ensure compliance with FCC RF exposure guidelines.  
Information for DECT Product  
This telephone is compliant with the DECT 6.0 standard which operates in the  
1.9ꢀGHz to 1.9ꢁGHz frequency range. Installation of this equipment is subject  
to notification and coordination with UTAM. Any relocation of this equipment  
must be coordinated through and approved by UTAM. UTAM may be contacted  
at 1-800-4ꢀ9-88ꢀ6.  
CAUTION:  
RISKOFELECTRICSHOCK  
DONOTOPEN  
THE EXCLAMATION  
POINT WITHIN THE  
TRIANGLE IS A  
THE LIGHTNING  
CAUTION: TO REDUCE THE  
FLASH AND ARROW RISK OF ELECTRIC SHOCK, DO  
HEAD WITHIN THE NOT REMOVE COVER (OR  
WARNING:TO  
WARNING SIGN  
ALERTING YOU OF  
IMPORTANT  
BACK). NO USER  
PREVENT FIRE OR  
ELECTRICAL SHOCK  
HAZARD, DO NOT  
EXPOSETHIS  
TRIANGLE IS A  
WARNING SIGN  
ALERTING YOU OF  
“DANGEROUS  
VOLTAGE” INSIDE  
THE PRODUCT.  
SERVICEABLE PARTS INSIDE.  
REFER SERVICING TO  
QUALIFIED SERVICE  
PERSONNEL.  
INSTRUCTIONS  
ACCOMPANYING  
THE PRODUCT.  
PRODUCT TO RAIN  
OR MOISTURE.  
SEE MARKING ON BOTTOM / BACK OF PRODUCT  
4
Table of Contents  
Important InformatIon.................................2  
Interference InformatIon.............................2  
telephone network InformatIon .................2  
ren number ...............................................3  
hearIng aId compatIbIlIty (hac) .................3  
lIcensIng .....................................................3  
fcc rf radIatIon exposure statement ........3  
InformatIon for dect product ..................3  
table of contents .......................................5  
table of contents .......................................6  
IntroductIon ...............................................7  
before you begIn ........................................7  
Parts CheCklist ................................................7  
telePhone JaCk requirements.........................8  
InstallatIon .................................................9  
Digital seCurity system ...................................9  
imPortant installation guiDelines .................9  
handset layout .........................................10  
base layout...............................................11  
InstallIng the phone..................................11  
installing the hanDset Battery...................11  
Base station....................................................12  
Bluetooth® setuP .........................................13  
ConneCt (anD Pair) ....................................13  
DisConneCt.................................................13  
reConneCt ..................................................13  
programmIng InformatIon .........................14  
programmIng the handset ........................14  
Phone Book ....................................................14  
aDDing Phone Book entries ...................14  
storing the last numBer DialeD ...........16  
inserting a Pause in the Dialing  
DesireD grouP .....................................18  
set grouP ring....................................18  
Changing the grouP name................18  
managing sPeeD Dialing reCorD ...........19  
aDDing the sPeeD Dialing numBer ...19  
eDiting the sPeeD Dialing numBer ...19  
Deleting the sPeeD Dialing numBer 19  
transferring the Phone Book reCorD  
Between hanDset(s) ..................................20  
Call reCorDs ..................................................20  
reCeiveD Calls...........................................20  
DialeD Calls ..............................................21  
alarm ...............................................................21  
set alarm time..........................................21  
snooze ........................................................22  
set CyCle time ...........................................22  
set alarm meloDy ....................................22  
sCheDuler........................................................23  
aDDing a reminDer....................................23  
set snooze............................................23  
set CyCle time......................................24  
set alarm meloDy...............................24  
reviewing anD eDiting the reminDer  
reCorD ........................................................24  
Deleting a reminDer reCorD...................25  
extra features ...............................................25  
room monitoring .....................................25  
interCom oPeration ..................................26  
hanDset to hanDset interCom Call......26  
reCeiving an interCom Call ....................27  
Push to talk..............................................27  
Phone setting ................................................27  
language ....................................................28  
set Date/time ............................................28  
set area CoDe...........................................28  
tone/Pulse.................................................29  
hanDset name ...........................................29  
registration ..............................................29  
gloBal De-registration ..........................30  
Default setting .........................................31  
sounD setting ...............................................31  
sequenCe(of a storeD numBer)..............16  
reviewing Phone Book reCorDs ............16  
eDiting a Phone Book reCorD................17  
Deleting a Phone Book reCorD.............17  
managing the reCorD grouPing in Phone  
Book............................................................18  
aDDing the Phone Book entries in  
DesireD grouP .....................................18  
Deleting the Phone Book entries in  
5
Table of Contents  
equalizer ....................................................31  
ringer tone ...............................................32  
ringer volume...........................................32  
key tone.....................................................32  
Call timer .......................................................39  
auto stanD-By................................................39  
flash/Call waiting ......................................39  
last numBer reDial.......................................39  
Page..................................................................40  
Paging from the Base/grouP Page .......40  
mute.................................................................40  
ringer volume (short-Cut)..........................40  
caller Id (cId).........................................41  
Call waiting Caller iD................................41  
CiD error CoDes...........................................41  
reCeiving CiD reCorDs .................................42  
storing CiD reCorDs (in CiD memory).....42  
reviewing CiD reCorDs................................42  
Dialing a CiD numBer ..................................42  
formatting a CiD numBer Before Dialing43  
storing CiD reCorDs into Phone Book ....44  
Deleting a CiD reCorD.................................44  
connectIng the belt clIp...........................45  
connectIng optIonal headset ...................45  
changIng the battery ................................45  
battery safety precautIons .......................46  
dIsplay messages .......................................46  
handset sound sIgnals .............................48  
troubleshootIng guIde..............................48  
telePhone solutions .....................................48  
Caller iD solutions......................................50  
Battery solutions..........................................50  
causes of poor receptIon..........................51  
general product care ..............................51  
warranty..................................................52  
accessory InformatIon ..............................53  
Index .........................................................54  
®.................................................................................................33  
Bluetooth  
DeviCe info.................................................33  
auto ConneCt............................................33  
telephone operatIon .................................34  
visual inDiCators ...........................................34  
in use inDiCator on the Base ...............34  
talk inDiCator anD sPkr inDiCator on  
the hanDset ...............................................34  
vmwi inDiCator on hanDset .................34  
sPeakerPhone oPeration...............................34  
volume settings.............................................34  
making a Call.................................................34  
lanDline Calls...........................................34  
Cellular Calls ..........................................35  
answering a Call ..........................................35  
lanDline Calls...........................................35  
Cellular Calls ..........................................35  
reCeiving a lanDline Call During a  
Cellular Call ............................................36  
reCeiving a Cellular Call During a  
lanDline Call ............................................36  
reCeiving lanD line Call anD Cell Call  
simultaneously...........................................36  
availaBle oPtions During a lanDline Call 36  
more............................................................36  
holD.......................................................36  
interCom................................................37  
availaBle oPtions During a Cell Call ......37  
more............................................................37  
holD.......................................................37  
interCom................................................37  
transfer to Cell..................................37  
ConferenCe ...............................................38  
3-way ConferenCe Calls ....................38  
4-way ConferenCe Calls ....................38  
6
Introduction  
CAUTION: When using telephone equipment, there are basic  
safety instructions that should always be followed. Refer to the  
IMPORTANT SAFETY INSTRUCTIONS provided with this product  
and save them for future reference.  
IMPORTANT: Because cordless phones operate on electricity,  
you should have at least one phone in your home that isn’t  
cordless, in case the power in your home goes out.  
Before You Begin  
Parts Checklist (for model 28127xx1)  
Make sure your package includes the items shown here.  
Telephone  
line cord  
Charger  
Base and  
desktop stand  
Handset  
Battery compartment  
cover  
AC power  
adaptor  
Belt clip  
Handset  
battery pack  
7
For Model 28127xx2 there will be ONE additional handset, charge cradle,  
belt clip, battery pack and cover than shown.  
NOTE: if a headset is included in your package, it replaces one set  
of a handset, belt clip, battery pack and cover.  
For Model 28127xx3 there will be TWO additional handsets, charge cradle,  
belt clips, battery packs and covers than shown.  
For Model 28127xx4 there will be THREE additional handsets, charge cradle,  
belt clips, battery packs and covers than shown.  
For Model 28127xx5 there will be FOUR additional handsets, charge cradle,  
belt clips, battery packs and covers than shown.  
For Model 28127xx6 there will be FIVE additional handsets, charge cradle,  
belt clips, battery packs and covers than shown.  
For Model 28127xx7 there will be SIX additional handsets, charge cradle, belt  
clips, battery packs and covers than shown.  
Telephone Jack Requirements  
Wall plate  
To use this phone, you need an RJ11C type modular telephone  
jack, which might look like the one pictured here, installed in your  
Modular  
telephone  
line jack  
home. If you don’t have a modular jack, call your local phone  
company to find out how to get one installed.  
8
Installation  
Digital Security System  
Your cordless phone uses a digital security system to protect against false ringing,  
unauthorized access, and charges to your phone line.  
INSTALLATION NOTE: Some cordless telephones operate at  
frequencies that may cause or receive interference with nearby  
TVs, microwave ovens, and VCRs. To minimize or prevent such  
interference, the base of the cordless telephone should not be  
placed near or on top of a TV, microwave ovens, or VCR. If such  
interference continues, move the cordless telephone farther away  
from these appliances.  
Certain other communications devices may also use the 1.9 GHz  
frequency for communication, and, if not properly set, these  
devices may interfere with each other and/or your new telephone.  
If you are concerned with interference, please refer to the owner’s  
manual for these devices on how to properly set channels to avoid  
interference. Typical devices that may use the 1.9 GHz frequency  
for communication include wireless audio/video senders, wireless  
computer networks, multi-handset cordless telephone systems,  
and some long-range cordless telephone systems.  
Important Installation Guidelines  
Avoid sources of noise and heat, such as motors, fluorescent lighting, microwave  
ovens, heating appliances and direct sunlight.  
Avoid areas of excessive dust, moisture and low temperature.  
Avoid other cordless telephones or personal computers.  
Never install telephone wiring during a lightning storm.  
Never install telephone jacks in wet locations unless the jack is specifically  
designed for wet locations.  
Never touch non-insulated telephone wires or terminals, unless the telephone line  
has been disconnected at the network interface.  
Use caution when installing or modifying telephone lines.  
9
Handset Layout  
Visual Message  
Waiting Indicator  
Volume 5/6  
(buttons)  
Earpiece  
Display  
CID/5  
(Caller ID button)  
Push to Talk  
(button)  
SKR  
(soft key right)  
SKL  
(soft key left)  
Speaker indicator  
Sound quality /4  
TALK indicator  
(button)  
PHONEBOOK/  
3
SPKR (button)  
Headset jack  
(button)  
TALK (button)  
DELETE/flash  
(button)  
REDIAL/  
6
(button)  
END/cancel  
(button)  
MUTE  
(button)  
#PAUSE/ringer  
(button)  
*TONE  
(button)  
Microphone  
10  
Base Layout  
Installing the Phone  
Installing the Handset Battery  
NOTE: You must connect the handset battery before using the  
cordless handsets.  
CAUTION: To reduce the risk of fire or personal injury, use only  
the Thomson Inc. approved model 5-2840 Nickel-metal Hydride  
battery (Ni-MH), which is compatible with this unit.  
1. Locate battery and battery door which are packaged together inside a plastic bag  
and are separate from the handset.  
ꢀ. Locate the battery compartment on the back of the handset.  
ꢁ. Plug the battery pack cord into the jack inside the compartment.  
11  
NOTE: To ensure proper battery installation, the connector is keyed  
and can be inserted only one way.  
PRESS DOWN  
FIRMLY  
4. Insert the battery pack.  
5. Close the battery compartment by pushing the door up until it snaps into place.  
6. Place the handset in the charging cradle. Allow handset to charge for 16  
hours prior to first use. If you do not properly charge the handset, battery  
performance is compromised.  
Base Station  
1. Choose an area near an electrical outlet and  
a telephone wall jack (RJ11C), and place your  
cordless telephone on a level surface, such as a  
desktop or tabletop.  
ꢀ. Plug one end of the telephone line cord into the  
TEL LINE jack on the bottom of the base and the  
other end into a modular jack.  
ꢁ. Plug the AC power converter into the electrical outlet and the DC connector into  
the jack on the bottom of the base.  
4. Place the handset in the charge cradle. The Charge indicator turns on, verifying the  
battery is charging.  
NOTE: After the Handset and Base have been powered up, the  
handset displays the Date/Time set up screen for entry. You MUST  
enter the date/time prior to operating the unit.  
5. Use the number keys to enter the year and the date.  
6. Press the Next (SKL) button to move to Set Time menu.  
1ꢀ  
7. Use the number keys to enter the time and use the  
or  
button to select  
AM or PM.  
8. Press the Store (SKL) button to save the settings. You will hear a confirmation tone.  
9. Allow the phone to charge for 16 hours prior to first use. If you don’t properly  
charge the phone, battery performance is compromised.  
CAUTION: To reduce risk of personal injury, fire or damage  
use only the 5-2812 power adaptor listed in the user’s guide.  
This power adaptor is intended to be correctly orientated in a  
vertical or floor mount position.  
BlueTooth® Setup  
This unit supports a maximum of two Bluetooth cell phone devices. To use you  
Bluetooth cell phone device with the ꢀ81ꢀ7 System, you must activate Bluetooth on  
your device and then pair the device to the base.  
NOTE: Your Bluetooth cell phone device should be within 2 feet  
to 10 feet from the base. If the device is too close it may create  
undesired noise. If device is too far it will not pair.  
Connect (and pair)  
1. Make sure your phone is OFF (not in talk mode).  
ꢀ. Press and hold the CELL 1 or CELL 2 button on base until the corresponding LED  
flashes. (refer to the instruction manual for your cell phone device on the  
proper procedure to add and pair a new device)  
When “CELL FUSION” is shown on the device.  
ꢁ. Use the number keys to enter the default PIN 0000 on your Bluetooth cell phone  
device. When the device is paired successful, the corresponding LED illuminates.  
Disconnect  
Press and hold the CELL 1 or CELL 2 button to disconnect the Bluetooth cell phone.  
The CELL 1 or CELL 2 indicator will no longer be illuminated.  
Reconnect  
Press and release the CELL 1 or CELL 2 button again and the connection will resume.  
NOTE: Certain cell phones may require an acceptance to allow  
reconnection.  
1ꢁ  
Programming Information  
The handset menus give you access to all of the built-in features.  
Press the Menu (SKL) button to display the menu options, then press the  
or  
button to navigate to the desired option. Press the Select (SKL) button to activate  
a menu option. For details on programming, refer to the applicable section. During  
programming, you may press the Back (SKR) button at any time to exit the menu and  
keep the previous setting.  
NOTE: You can press the END/cancel button at any time to go back  
to standby mode.  
Text Entry: Use the number keys to enter characters. More than one letter is stored  
in each of the number keys. For example, press the ꢀ key twice for the letter B. Press  
the 1 key to insert a space. Press the *TONE button to toggle between upper and  
lower case.  
NOTE: If you make a mistake, use the DELETE/flash button to  
backspace and delete one character at a time.  
Programming The Handset  
There are eight programmable menus available: Phone book, Call records, Alarm,  
Scheduler, Extra Features, Phone setting, Sound settings and Bluetooth.  
Phone Book  
NOTE: At any time you may press the END/cancel button on  
handset to exit and return to stand-by mode.  
Each handset can store up to two hundred entries in phone book for quick dialing,  
each entry can contain a maximum of ꢀ0-digit numbers and 15-character names.  
Adding Phone Book Entries  
For each entry you can enter up to 4 separate numbers and then assign a specific  
melody. The melody will ONLY work if you have subscribed to the Caller ID service.  
Then when that person calls, the assigned melody will ring instead of the normal ring.  
You may choose from 5 different ring tones.  
1. Make sure your phone is OFF (not in talk mode).  
ꢀ. Press the Menu (SKL) button and use the  
or  
button to scroll to Phone Book.  
NOTE: You may press the  
button to short-cut to the phone book.  
14  
ꢁ. Press the Select (SKL) button to enter the phone book.  
NOTE: If there are no records stored you will go directly to the Add  
Record menu.  
4. Press the Option (SKL) button to enter submenu.  
5. Use the  
or  
button to scroll to Add Record.  
6. Press the Select (SKL) button to confirm. Phone book memory space shows on the  
display for ꢀ seconds. The screen displays Enter Name.  
7. Use the number keys to enter a name ( up to 15 characters, including spaces).  
More than one letter is stored in each of the number keys. (The number 1 key can  
be used to enter “space”,”-”,”*”, and “!”)  
NOTE: Use the */TONE button to toggle between upper case/lower  
case text entry.  
8. Press Next (SKL) button to move to save the name and proceed to Enter Number  
screen.  
9. Use the number keys to enter the telephone number (up to ꢀ0 digits).  
NOTE: If you make a mistake press the DELETE/flash button to  
backspace and erase the wrong character(s).  
10.Use the  
or  
button to select from the desired category; Home, Office, Cell  
or Other.  
11.Press the Store (SKL) button to save the number.  
- Add an additional Number to record (Up to 4 numbers)  
• Use the  
or  
button to scroll to Add Number.  
• Press the Edit (SKL) button to confirm.  
• Use number keys to enter the telephone number.  
• Use the  
• Press the Store (SKL) button to save the number.  
1ꢀ.Use the or button scroll to Ring Tone.  
or  
button to select from the desired category.  
1ꢁ.Press the Edit (SKR) button and use the  
or  
button to scroll to desired  
ringtone.  
14.Press the Select (SKL) button to confirm.  
15  
Storing the Last Number Dialed  
Store a dialed number when reviewing it:  
1. Make sure the phone is OFF (not in talk mode).  
ꢀ. Press the  
ꢁ. Use the  
button on the handset to access the Dialed Calls menu.  
or button to scroll to desired record.  
4. Press the Store (SKL) button to save the number.  
5. Use the  
or  
button to select from the desired category; Home, Office, Cell  
or Other.  
6. Press the Select (SKL) button to confirm. The screen displays Enter Name.  
7. Use the number keys to enter a name (up to 15 characters, including spaces). More  
than one letter is stored in each of the number keys. (The number 1 Key can be  
used to enter “space”, “-”, “*” and “!”)  
8. Press the Store (SKL) button to save the record.  
Inserting a Pause in the Dialing Sequence  
(of a Stored Number)  
Press the #PAUSE/ringer button on the handset to insert a delay in dialing sequence  
of a stored number when a pause is needed to wait for a dial tone (for example, after  
you dial 9 for an outside line, or to wait for a computer access tone.) Each pause  
counts as one digit in the dialing sequence.  
You can press the #PAUSE/ringer button to insert a P (pause) when you enter the  
telephone number when adding a phone book entry.  
Reviewing Phone Book Records  
1. Make sure your phone is OFF (not in talk mode).  
ꢀ. Press the Menu (SKL) button and use the  
or  
button to scroll to Phone  
Book.  
ꢁ. Press the Select (SKL) button to enter the phone book.  
NOTE: You may press the  
book, too.  
button to short-cut to the phone  
4. Use the  
or  
button to scroll the records  
16  
- OR -  
Press the number keys to go to the name of the records started with the  
corresponding character.  
NOTE: Your phone book records are sorted automatically in  
alphabetical order.  
5. Press the Option (SKL) button to view the details of the record.  
Editing a Phone Book Record  
1. When reviewing the phone book records list, use the  
or  
button to scroll  
to the desired record or enter the first character of name for alphabetical search.  
ꢀ. Press Option (SKL) button to access the option menu.  
ꢁ. Use the  
or  
button to scroll to Edit Record.  
4. Press the Edit (SKL) button to confirm. The screen displays the detail information of  
desired record.  
5. Use the  
or  
button to scroll to desired edit item.  
6. Press the Select (SKL) button.  
7. The steps to edit are the same as steps in the section Adding Phone Book Entries.  
• Step 7 if you are editing the name.  
• Step 9 if you are editing the number.  
• Step 11 if you are editing the category.  
• Step 1ꢀ VIP ring you are editing the VIP ring tone.  
Deleting a Phone Book Record  
1. When reviewing the phone book records list, use the  
number keys to scroll to the desired record.  
or  
button or the  
ꢀ. Press Option (SKL) button to access the option menu.  
ꢁ. Use the  
or  
button to scroll to Delete Record.  
4. Press the Select (SKL) button. The screen displays DELETE?.  
5. Press the Yes (SKL) button to confirm the deletion. The screen displays DELETED.  
NOTE: If you don’t want to change or delete the record when the  
screen displays DELETE?, simply press the No (SKR) button, or wait  
for one minute to exit the review mode automatically.  
17  
Managing the Record Grouping in Phone Book  
This enables you to group a selection of records together, then specify a certain  
ringtone for the group.  
1. Make sure your phone is OFF (not in talk mode).  
ꢀ. Press the  
ꢁ. Use the  
button to short-cut to phone book menu.  
or button to scroll to desired record.  
4. Press the Option (SKL) button to access the Option menu.  
5. Use the or button to scroll to Grouping.  
6. Press the Select (SKL) button and use the  
or  
button to select desired  
group.  
7. Press the Select (SKL) button to confirm. The screen displays 5 items for grouping.  
Adding the Phone Book Entries In Desired Group  
From the GROUPING menu:  
1. Use the  
or  
button to select the Add Member menu.  
ꢀ. Press the Select (SKL) button to confirm the selection.  
Deleting the Phone Book Entries In Desired Group  
From the GROUPING menu:  
1. Press the Option (SKL) button and use the  
or  
button to scroll to Delete  
Member.  
ꢀ. Press the Select (SKL) button to confirm the selection.  
Set Group Ring  
From the GROUPING menu:  
1. Press the Option (SKL) button and use the  
or  
button to scroll to Set  
Group Ring.  
ꢀ. Use the  
or  
button to scroll to desired ring tone.  
ꢁ. Press Select (SKL) button to confirm the selection.  
Changing the Group Name  
From the GROUPING menu:  
1. Press Option (SKL) button and use the  
or  
button to scroll to Rename.  
18  
ꢀ. Use the number keys to enter a name (up to 15 characters, including space.)  
NOTE: If you make a mistake press the DELETE/flash button to  
backspace and erase the wrong character(s).  
ꢁ. Press the Store (SKL) button to save the new group name.  
Managing Speed Dialing Record  
Adding the Speed Dialing Number  
1 Make sure your phone is OFF (not in talk mode).  
ꢀ. Press the  
ꢁ. Use the  
button to short-cut to phone book menu.  
or button to scroll to desired record.  
4. Press the Option (SKL) button to access the option menu.  
5. Use the or button to scroll to Speed Dialing.  
6. Press the Select (SKL) button and use the  
or  
button to select desired  
location. (Up to 10 locations, 0 to 9)  
7. Press the Select (SKL) button to confirm.  
Editing the Speed Dialing Number  
1. Make sure your phone is OFF (not in talk mode).  
ꢀ. Press the  
ꢁ. Press the Option (SKL) button to access the option menu.  
4. Use the or button to scroll to Speed Dialing.  
button to short-cut to phone book menu.  
5. Press the Select (SKL) button and use the  
or  
button to select desired  
location.  
6. Press the Option (SKL) button to access the option menu.  
7. Use the or button to scroll to Edit Number.  
8. Press the Select (SKL) button. The screen displays the phone book records.  
9. Use the or button to scroll to desired record.  
10.Press Select (SKL) button to confirm the selection.  
Deleting the Speed Dialing Number  
1. Follow steps 1 to 6 in section “Editing the Speed Dialing Number.  
ꢀ. Use the  
or  
button to scroll to Delete Number.  
19  
ꢁ. Press the Select (SKL) button. The screen displays DELETE?.  
4. Press the Yes (SKL) button to confirm the selection. The screen displays DELETED.  
Transferring the Phone book record between handset(s)  
1. Make sure your phone is OFF (not in talk mode).  
ꢀ. Press the  
ꢁ. Use the  
button to short-cut to phone book menu.  
or button to scroll to desired record.  
4. Press the Option (SKL) button to access the option menu.  
5. Use the or button to scroll to Transfer Record.  
6. Press the Select (SKL) button and the screen displays the list of registered handsets.  
7. Use the or button to scroll to desired handset.  
8. Press the Select (SKL) button to confirm the selection. After the transfer process  
finish, the screen displays Successful.  
Call Records  
This option allows you to redial the number from a CID records or Dialed calls. There  
are maximum 40 CID records and 10 dialed calls stored in handset unit.  
1. Make sure your phone is OFF (not in talk mode).  
ꢀ. Press the Menu (SKL) button to enter the main menu.  
ꢁ. Use the  
or  
button to scroll to Call Records.  
4. Press the Select (SKL) button to enter the submenu.  
Received Calls  
From the CALL RECORDS menu:  
1. Use the  
or  
button to scroll to Received Calls.  
ꢀ. Press the Select (SKL) button to confirm, a total of All calls and New calls displays.  
ꢁ. Press the View (SKL) button and the calls are shown in the order of the most recent  
date & time the calls was received.  
4. Press the  
or  
button to scroll to the records for desired record  
5. Press the More (SKL) button to see more options.  
6. Press the  
ꢀ0  
or  
button to select Format or Store.  
7. Press the Select (SKL) button to confirm the option. (If Store is selected, please  
refer to the Phone Book section of the manual for detailed information.)  
8. Press the Format (SKL) button repeatedly to scroll through the formats available  
for selection. When it is on the preferred format, press the Back (SKR) button to  
return to review mode.  
9. Press the TALK or SPKR button to dial out the number on the land line or press the  
Cell (SKR) button to dial out the number on the cell phone.  
Dialed Calls  
From the CALL RECORDS menu:  
1. Use the  
ꢀ. Press the Select (SKL) button to confirm, a listing of all calls display.  
ꢁ. Press the or button to scroll to the desired number.  
or  
button to scroll to Dialed Calls.  
4. Press the TALK or SPKR button to dial out the number on the land line or press the  
Cell (SKP) button to dial out the number on the cell phone.  
Alarm  
Set an alarm, then program the snooze time, occurrences, and melody preferences.  
1. Make sure your phone is OFF (not in talk mode).  
ꢀ. Press the Menu (SKL) button to enter the main menu.  
ꢁ. Use the  
or  
button to scroll to ALARM.  
4. Press the Select (SKL) button to enter the submenu. The screen displays Alarm  
on/off.  
5. Use the  
or  
button to scroll to On or Off.  
6. Press the Select (SKL) button to save your selection. You will hear a confirmation  
tone.  
Set Alarm Time  
NOTE: Alarm must be activated to set time.  
From the ALARM On menu:  
1. Press the Select (SKL) button to enter the menu. The screen displays Set Alarm.  
ꢀ1  
ꢀ. Use number keys to enter the time, then use the  
or  
button to select AM  
or PM. The default setting is 12:00AM.  
ꢁ. Press the Store (SKL) button to save your setting. You will hear a confirmation tone.  
Snooze  
From the ALARM On menu:  
1. Use the  
or  
button to scroll to Snooze: Off.  
ꢀ. Press the Select (SKL) button to enter the menu. The screen displays Snooze On/  
Off.  
ꢁ. Use the  
or  
button to select from Off, Every 5 minutes, Every 10  
minutes , Every 15 minutes or Every 30 minutes. The default setting is Off  
4. Press the Store (SKL) button to save your selection. You will hear a confirmation  
tone.  
Set Cycle Time  
From the ALARM On menu:  
1. Use the  
ꢀ. Press the Select (SKL) button to enter the menu.  
ꢁ. Use the or button to select Once or Daily. The default setting is Once.  
or  
button to scroll to Cycle: Once.  
4. Press the Store (SKL) button to save your selection. You will hear a confirmation  
tone.  
NOTE: If you select Daily, the system will follow the current time  
setting to turn on the alarm.  
Set Alarm Melody  
From the ALARM On menu:  
1. Use the  
ꢀ. Press the Select (SKL) button to enter the menu.  
ꢁ. Use the or button to select desired melody.  
or  
button to scroll to Alarm Melody.  
4. Press the Select (SKL) button to save your selection. You will hear a confirmation  
tone.  
ꢀꢀ  
Scheduler  
This feature allows you to set the reminder events by using the calendar.  
1. Make sure your phone is OFF (not in talk mode).  
ꢀ. Press the Menu (SKL) button to enter the main menu.  
ꢁ. Use the  
or  
button to scroll to Scheduler.  
4. Press the Select (SKL) button to enter the submenu.  
Adding a Reminder  
From the Scheduler menu  
1. Use the  
or  
button to scroll to Add Reminder.  
ꢀ. Press the Select (SKL) button to enter the Set Date menu. The screen displays Year  
and Date.  
ꢁ. Use the number keys to enter the year and date desired for the reminder.  
4. Press Next (SKL) button to move to Set Time menu.  
5. Use the number keys to enter the time and use the  
or  
button to select AM  
or PM.  
6. Press the Store (SKL) button to save the setting.  
7. Press the Select (SKL) button to enter Reminder Message menu.  
8. Use the number keys to enter the text content (up to 96 characters).  
9. Press the Store (SKL) button to save the information. You will hear a confirmation  
tone. You may now program the snooze time, occurrences and melody  
preferences for your reminder.  
Set Snooze  
From the Add Reminder menu:  
1. Use the  
ꢀ. Press the Select (SKL) button to enter the menu.  
ꢁ. Use the or button to select from Off, Every 5 minutes. Every 10  
or  
button to scroll to Snooze On/Off.  
minutes or Every 30 minutes. The default setting is Off.  
4. Press the Store (SKL) button to save your selection. You will hear a confirmation tone.  
ꢀꢁ  
Set Cycle Time  
From the Add Reminder menu:  
1. Use the  
ꢀ. Press the Select (SKL) button to enter the menu.  
ꢁ. Use the or button to select Once, Daily, Weekly, Monthly or Yearly.  
or  
button to scroll to Cycle.  
The default setting is Once.  
4. Press the Select (SKL) button to save your selection. You will hear a confirmation  
tone.  
NOTE: The system will follow the current time setting to turn on  
the alarm.  
Set Alarm Melody  
From the Add Reminder menu:  
1. Use the  
ꢀ. Press the Select (SKL) button to enter the menu.  
ꢁ. Use the or button to select desired melody.  
or  
button to scroll to Melody.  
4. Press the Select (SKL) button to save your selection. You will hear a confirmation  
tone.  
Reviewing and Editing the Reminder Record  
From the Scheduler menu:  
1. Use the  
or  
button to scroll to View Reminder.  
ꢀ. Press the Select (SKL) button to enter the menu. The screen displays the reminder  
records.  
ꢁ. Use the  
or  
button to select the desired record and press the Select  
(SKL) button to view the record detail.  
4. Press the Option (SKL) button to enter the option menu.  
5. Use the  
or  
button to scroll to Edit Reminder.  
6. Repeat steps ꢁ through 8 in “Adding a Reminder.  
ꢀ4  
Deleting a Reminder Record  
From the Scheduler menu:  
1. Use the  
or  
button to scroll to View Reminder.  
ꢀ. Press the Select (SKL) button to enter the menu. The screen displays the reminder  
records.  
ꢁ. Use the  
or  
button to select the desired record and press the Select  
(SKL) button to view the record details.  
4. Press the Option (SKL) button to enter the option menu.  
5. Use the  
or  
button to scroll to Delete Reminder.  
6. Press the Option (SKL) button to enter the menu. The screen displays DELETE?.  
7. Press the Yes (SKL) button. You will hear a confirmation tone.  
Extra Features  
In the extra features Menu, there are three programmable submenus: Room  
Monitoring, Intercom and Push to Talk.  
1. Make sure you handset is OFF (not in talk mode).  
ꢀ. Press the Menu (SKL) button to enter the menu.  
ꢁ Use the  
or  
button to scroll to Extra Features.  
4. Press the Select (SKL) button to enter the submenu.  
Room Monitoring  
From the Extra Features menu:  
1. Use the  
or  
button to scroll to Room Monitoring.  
ꢀ. Press the Select (SKL) button and the screen displays all the list of registered  
handsets.  
ꢁ. Use the  
or  
button to scroll to the desired handset. Press the Select  
(SKL) button to confirm.  
NOTE:  
1) If handsets have been named, then the name will be displayed on  
the screen instead of handset numbers.  
ꢀ5  
2) During the room monitoring, it will emit a beep tone if there  
are incoming calls. You may press the TALK or SPKR button on the  
handset to answer the call and quit the room monitor mode.  
4. Press the Back (SKR) button to end room monitoring.  
Intercom Operation  
The intercom feature allows you to have a conversation with another registered  
handset without tying up the telephone line, allowing you to still receive incoming  
calls.  
Handset to Handset Intercom Call  
Form the Extra Features menu:  
1. Use the  
ꢀ. Press the Select (SKL) and the screen displays a list of registered handsets.  
ꢁ. Use the or  
or  
button to scroll to Intercom.  
button to scroll to the desired handset. Press the Select  
(SKL) button to confirm.  
4. The receiving handset is paged and emits a tone.  
NOTE: To cancel the page, press the Back (SKL) button or the END/  
cancel button on the originating handset.  
5. Wait for the person at the receiving handset to press the Answer (SKL) button.  
NOTE: If the receiving handset does not answer within two minutes,  
the intercom call is automatically cancelled and the originating  
handset displays NO ANSWER.  
6. When finished, press the Back (SKR) or END/cancel button on handset to  
deactivate the intercom.  
NOTE: The system is expandable up to 7 handsets (by purchase  
of optional Model 28107 handset with recharge cradle). When  
7 handsets are registered, the system can handle 2 separate  
intercom operations simultaneously. For example, 1st handset  
intercoms with 2nd handset while 3rd handset intercoms with 4th  
handset.  
ꢀ6  
Receiving an Intercom Call  
When you receive an intercom call, your handset beeps. To answer the call press the  
Answer (SKL) button on the handset.  
NOTE: If you receive a telephone call during an intercom call, the  
intercom call is immediately terminated and the handset rings.  
Press the TALK or SPKR button on the handset to answer the call.  
Push to Talk  
This feature allows you to directly talk to another registered handset by pressing the  
Push to Talk button.  
1. Make sure your phone is OFF (not in talk mode).  
ꢀ. Press the Menu (SKL) to enter the main menu.  
ꢁ. Use the  
4. Press the Select (SKL) button to enter the menu.  
5. Use the or button to scroll to Push To Talk.  
or  
button to scroll to Extra Features.  
NOTE: You may press the Push to Talk button on side of the handset  
to short-cut to the menu.  
6. Press the Select (SKL) button to enter the menu. The screen displays the list of  
registered handset and base.  
7. Use the  
or  
button to select desired handset.  
8. Press the Select (SKL) button to save your selection.  
9. Press and hold the Push to Talk button to connect with the desired handset.  
Phone Setting  
There are eight programmable menus available: Language, Set Date/Time, Set Area  
Code, Tone/Pulse, Handset Name, Registration, Deregistration and Default Setting.  
1. Make sure your phone is OFF (not in talk mode).  
ꢀ. Press the Menu (SKL) button to enter the menu.  
ꢁ. Use the  
or  
button to scroll to Phone Setting.  
4. Press the Select (SKL) button to enter the submenu.  
ꢀ7  
Language  
This menu allows you to change the language of the display prompts on the handset.  
From the PHONE SETTING menu:  
1. Use the  
or  
button to scroll to Language.  
ꢀ. Press the Select (SKL) button to enter the menu.  
ꢁ. Use the  
or  
button to scroll to the desired language. The default is  
English.  
4. Press the Select (SKL) button to save your selection. You will hear a confirmation  
tone.  
Set Date/Time  
From the PHONE SETTING menu:  
1. Use the  
or  
button to scroll to Set Date/Time.  
ꢀ. Press the Select (SKL) button to enter the menu. The screen displays Set Date.  
ꢁ. Use the number keys to enter the year and date.  
4. Press the Next (SKL) button to move to time setup.  
5. Use the number keys to enter the time and the  
or  
button to select AM or  
PM.  
6. Press the Store (SKL) button to save the setting. You will hear a confirmation tone.  
Set Area Code  
If you enter your local ꢁ-digit area code in the area code menu, your local area code  
does not display on the Caller ID (CID) list. Instead, you only see the local 7-digit  
number. Calls received from outside your local area code will display the full 10-digits  
From the PHONE SETTING menu:  
1. Use the  
or  
button to scroll to Set Area Code.  
ꢀ. Press the Select (SKL) button to enter the menu.  
ꢁ. Use the number keys to enter your ꢁ digit area code. The default setting is “ - - - “.  
4. Press the Store (SKL) button to save the setting. You will hear a confirmation tone.  
NOTE: To restore the default setting to “---”, press and release the  
DELETE/flash button when the screen displays Set Area Code.  
ꢀ8  
Tone/Pulse  
From the Phone Setting menu:  
1. Use the  
ꢀ. Press the Select (SKL) button to enter the menu.  
ꢁ. Use the or button to select Tone or Pulse. The default is Tone.  
or  
button to scroll to Tone/Pulse.  
4. Press the Select (SKL) button to save your selection. You will hear a confirmation tone.  
Handset Name  
This menu allows you to enter a name for the handset, which displays on the idle  
screen.  
From the PHONE SETTING menu:  
1. Use the  
or  
button to scroll to Handset Name.  
ꢀ. Press the Select (SKL) button to enter the menu.  
ꢁ. Use the number keys to enter a name (up to 15 characters). More than one letter is  
stored in each of the number keys. For example, to enter Bill Smith, press the ꢀ key  
twice for the letter B. Press the 4 key ꢁ times for the letter I. Press the 5 key ꢁ times  
for the letter L. Wait for 1 second, press the 5 key ꢁ times for the second letter L,  
and press the 1 key to insert a space between the first and last name. Press the 7  
key 4 times for the letter S; press the 6 key once for the letter M; press the 4 key ꢁ  
times for the letter I. Press the 8 key for the letter T; press the 4 key twice for the  
letter H.  
4. Press the Store (SKL) button to save your setting. You will hear a confirmation tone.  
NOTE: If you make a mistake, use the DELETE/flash button to  
backspace and delete one character at a time.  
Registration  
Your packaged handset(s) are pre-registered and ready to use. It is not recommended  
that a handset be registered again unless absolutely necessary. If you must re-  
register a handset use the directions below.  
From the PHONE SETTING menu:  
1. Press and hold the Page button on the base until the in use indicator flashes.  
ꢀ. Use the  
or  
button to scroll to Registration.  
ꢀ9  
ꢁ. Press the Select (SKL) button to enter the menu.  
4. Use the or button to scroll to No or Yes. The default is NO.  
5. Press the Select (SKL) button to save your selection.  
6. If you select Yes. The screen displays PRESS AND HOLD BASE PAGE KEY.  
(Your handset should be held near the base during registration process.) If the  
registration is successful, the screen displays REGISTRATION SUCCESSFUL. You  
may now rename your handset.  
Deregistration  
From the PHONE SETTING menu;  
1. Use the  
ꢀ. Press the Select (SKL) button to enter the menu.  
ꢁ. Use the or button to scroll to No or Yes. The default is No.  
or  
button to scroll to Deregistration.  
4. Press the Select (SKL) button to save your selection.  
5. If you select Yes. The handset will automatically be deregistered. The screen  
displays Successful Deregistration, followed by HANDSET NEEDS REGISTRATION.  
6. You must re-register the handset to main base through the handset using Phone  
Setting Registration menu before use.  
Global De-Registration  
If one or more handsets become lost, you should deregister all handsets to ensure  
proper system operation. Follow the steps below to deregister all handsets at the  
same time.  
WARNING: It is not recommended that a handset be deregistered  
unless absolutely necessary because once a handset is  
deregistered, that handset’s telephone features cannot be used  
until the handset is re-registered.  
NOTE: Before starting global deregistration procedure, let all  
handsets set idle for 20 seconds.  
1. Disconnect the power from the base by unplugging the DC connector on back of base.  
ꢀ. Press and hold the Page button on the base and reconnect the power.  
ꢁ. Hold the Page button until the in use indicator flashes rapidly.  
ꢁ0  
4. Release the Page button.  
5. Press and release the Page button on the base once. All handsets are deregistered  
and the screen displays HANDSET NEEDS REGISTRATION.  
Default Setting  
This option allows you to return the handset to factory preset settings.  
From the Phone Setting menu:  
1. Use the  
ꢀ. Press the Select (SKL) button to enter the menu.  
ꢁ. Use the or button to scroll to No or Yes. The default is No.  
or  
button to scroll to Default Setting.  
4. If you select Yes, all the settings in the programmable menu are returned to  
factory default setting. Press the Select (SKL) button to save your selection. You will  
hear a confirmation tone.  
Sound Setting  
There are four programmable menus available: Equalizer, Ring Tone, Ring Volume and  
Key Tone.  
1. Make sure your phone is OFF (not in talk mode).  
ꢀ. Press the Menu (SKL) button and use the  
or  
button to scroll to Sound  
Setting.  
ꢁ. Press the Select (SKL) button to enter the menu.  
Equalizer  
This feature lets you to adjust the audio quality.  
From the Sound Setting menu:  
1. Use the  
or  
button to scroll to Equalizer.  
NOTE: You may press the  
the Equalizer menu.  
button from standby to shortcut to  
ꢀ. Press the Select (SKL) button to enter the menu.  
ꢁ. Use the or button to scroll to desired selection. The default is NATURAL.  
4. Press the Select (SKL) button to save your selection. You will hear a confirmation  
tone.  
ꢁ1  
Ringer Tone  
You may choose from the 15 preset melodies and 5 dual-tone ringer tones.  
From the Sound Setting menu:  
1. Use the  
ꢀ. Press the Select (SKL) button to enter the menu.  
ꢁ. Use the or button to scroll to the desired ringer tone. The default is  
MELODY 1.  
or  
button to scroll to Ringer Tone.  
4. Press the Select (SKL) button to save your selection. You will hear a confirmation  
tone.  
Ringer Volume  
You may choose ringer setting from this menu.  
From the Sound Setting menu:  
1. Use the  
or  
button to scroll to Ringer Volume.  
ꢀ. Press the Select (SKL) button to enter the menu.  
ꢁ. Use the  
or  
button to scroll to the desired ringer volume. The default is  
Volume 5.  
4. Press the Select (SKL) button to save your selection. You will hear a confirmation  
tone.  
NOTE: If you turn the ringer OFF, the screen displays Ringer Off  
.
Key Tone  
This feature allows you to set the key tone volume.  
From the Sound Setting menu:  
1. Use the  
or  
button to scroll to Key Tone.  
ꢀ. Press the Select (SKL) button to enter the menu.  
ꢁ. Use the  
or  
button to scroll to the desired key tone volume. The default  
is Level 3.  
4. Press the Select (SKL) button to save your selection. You will hear a confirmation  
tone.  
ꢁꢀ  
Bluetooth®  
1. Make sure your handset is OFF (not in talk mode).  
ꢀ. Press the Menu (SKL) button to enter the main menu.  
ꢁ. Use the  
or  
button to scroll to Bluetooth.  
4. Press the Select (SKL) button to enter the sub-menu. There are two programmable  
menus: Device Info and Auto Connect.  
Device Info  
From the Bluetooth menu:  
1. Use the  
or  
button to scroll to Device Info.  
ꢀ. Press the Select (SKL) button to enter the sub-menu. The screen displays a list of  
registered devices.  
ꢁ. Press the Exit (SKR) button to exit.  
Auto Connect  
Enable or disable the auto connect function of the base Bluetooth to registered cell  
phone.  
From the Bluetooth menu  
1. Use the  
ꢀ. Press the Select (SKL) button to enter the sub-menu.  
ꢁ. Use the or button to scroll to On or Off. The default is On.  
or  
button to scroll to Auto Connect.  
4. Press the Select (SKL) button to save your selection. You will hear a confirmation  
tone.  
ꢁꢁ  
Telephone Operation  
Visual Indicators  
IN USE Indicator on the Base  
The IN USE indicator is lit when the phone is in use. It flashes when you receive a call.  
TALK Indicator and SPKR Indicator on the Handset  
The TALK Indicator or SPKR Indicator is lit when the handset is in use. It flashes when  
you receive a call.  
VMWI Indicator on Handset  
IMPORTANT: In order to use this unit’s Visual Message Waiting  
Indicator (VMWI) feature, you must subscribe to this service from  
your phone company.  
The VMWI indicator on the top of the handset flashes when you receive a new  
message from your service provider.  
Speakerphone Operation  
NOTE: If you are using the speakerphone, remain close to handset  
so the party you are speaking to can hear you.  
If you are using the handset and want to switch to the speakerphone, press the  
SPKR button, press the END/cancel button to end conversation.  
If you are using the speakerphone and want to switch to the handset, press the  
TALK button, press the END/cancel button to end conversation.  
Volume Settings  
When the handset is ON (in talk mode), you may adjust the receiver volume by  
pressing the VOLUME 6or 5button on the side of the handset. There are four  
volume levels to choose from. When the maximum or minimum volume level is  
reached, the phone beeps twice. VOL 1 is minimum and VOL 4 is maximum.  
Making a Call  
Landline Calls  
1. Press the TALK or SPKR button on handset. Dial the desired number.  
-OR-  
ꢁ4  
Dial the number and then press the TALK or SPKR button on handset.  
-OR-  
Press the  
or  
button to select the desired record, then press the TALK or  
SPKR button on handset.  
-OR-  
Press and hold the number key to get the corresponding speed dialing number.  
ꢀ. When finished, press the END/cancel button on the handset to hang up.  
NOTE: You may enter up to 32 pre-dial digits.  
NOTE: If you want to delete the pre-dial number you entered, press  
the DELETE/flash button until all of the digits are erased.  
NOTE: To set the speed dialing number, refer to section “Phone  
Book -> Adding the Speed Dialing Number”.  
Cellular Calls  
1. In standby mode, dial the desired number, press Cell (SKR) button.  
NOTE: If more than one bluetooth cell phone device is connected  
use the  
or  
button to select the desired device.  
ꢀ. Press Select (SKL) button to confirm.  
4. Press the END/cancel button when finished.  
Answering a Call  
Check the display to see who is calling.  
Landline Calls  
1. Pick up the handset, and press the TALK or SPKR button on the handset.  
ꢀ. When finished, press the END/cancel button on the handset, or place the handset  
in the cradle.  
Cellular Calls  
1. Pick up the handset, and press the Cell (SKR) button on the handset.  
ꢀ. When finished, press the END/cancel button on the handset, or place the handset  
it the cradle.  
ꢁ5  
Receiving a Landline Call during a Cellular Call  
During a cellular call, if you receive an incoming landline call.  
1. Press the Line (SKR) button to answer the incoming call and the cellular call will be  
on hold.  
ꢀ. Press the SPKR button, the cellular call will switch to speakerphone mode.  
ꢁ. To switch between the two calls, press the Line (SKR) button while landline call is  
on hold, press the Cell (SKR) button while cellular call is on hold.  
Receiving a Cellular Call during a Landline Call  
During a landline call, if you receive an incoming cellular call.  
1. Press the Cell (SKR) button to answer the incoming cellular call and the land line  
call will be on hold.  
ꢀ. Press the SPKR button, the landline call will switch to speakerphone mode.  
ꢁ. To switch between the two calls, press the Line (SKR) button while landline call is  
on hold, press the Cell (SKR) button while cellular call is on hold.  
Receiving Land line Call And Cell Call Simultaneously  
If both landline call & Cell call rings at the same time, Incoming Call and Incoming  
Cell Call flash alternatively for 1 second before CID information comes up.  
1. To answer the incoming landline call, press the TALK button on handset.  
ꢀ. To answer the cellular call, press the Cell (SKR) button.  
If both calls are answered from the same handset, to switch between the two calls,  
press the Line (SKR) button while landline call is on hold, press the Cell (SKR) button  
while cellular call is on hold.  
Available Options During a Landline Call  
More  
During an external landline call, press More (SKL) button to enter the More sub-menu  
there are two options available: Hold and Intercom.  
Hold  
From the More menu:  
1. Use the  
or  
button to scroll to Hold.  
ꢁ6  
ꢀ. Press the Select (SKL) button to confirm. The screen displays LINE ON HOLD, while  
he call is on hold, you can use the number keypad to make a new call out on the  
cell line. Press the Line or the Cell (SKR) to switch between the calls.  
• To cancel hold, press the UnHold (SKL) button and return to original call.  
Intercom  
From the More menu:  
• This feature allows you to create a ꢁ-way conversation, please refer to Intercom  
Operation section of this manual for detail.  
Available Options During a Cell Call  
More  
During an external cell call, press the More (SKL) button to enter the More sub-menu,  
there are three options available:Hold, Intercom and Transfer to cell.  
Hold  
From the More menu:  
1. Use the  
or  
button to scroll to Hold.  
ꢀ. Press Select (SKL) button to confirm, the screen displays CELL ON HOLD. While the  
call is on hold, you can use the number keypad to make a new landline cell .  
• To cancel hold, press the UnHold (SKL) button and return to original call.  
Intercom  
From the More menu:  
• This feature allows you to create a ꢁ-way conversation, please refer to Intercom  
operation section of this manual for detail.  
Transfer to Cell  
From the More menu:  
This feature allows you cancel Bluetooth capabilities and transfer the active cell call  
from the handset back to your cell phone. The handset in use will then return to  
stand-by mode.  
NOTE: Check your cell phone instruction manual regarding  
capabilities before attempting transfer.  
ꢁ7  
Making a landline call when Talking To Cell Call  
During a cellular call, press the line (SKR) button to put the cellular call on hold, use  
the number keypad to make a land line call.  
Making a Cell Call When Talking To Landline Call  
During a landline call, press the Cell (SKR) button to put the land line call on hold.  
Enter the desired phone number, Press the Cell( SKR) button to dial.  
Conference  
This feature allows you to create a ꢁ-way conference calls with a single outside  
landline or cellular call and either; or a 4-way conference calls with the landline and  
cellular call simultaneously.  
3-way conference calls with a single outside landline or cellular call  
and either  
With a single outside landline or cellular call  
1. During a landline or cellular call, press the TALK or SPKR button to answer the  
incoming call.  
ꢀ. Press the More (SKL) button to enter sub-menu, Use the  
or  
button to  
select Intercom and press the Select (SKL) button to make the intercom call,  
ꢁ. Press the Conf (SKL) button for ꢁ-way conference. The screen displays Conference.  
4. Press the END/cancel button to exit conference.  
With an outside landline and cellular call  
1. During a landline or cellular call, press the Line/Cell (SKR) button to make the other  
landline or cellular call,  
ꢀ. Press the Conf (SKL) button to setup ꢁ-way conference.  
ꢁ. Press the END/cancel button to terminate both calls.  
4-way conference calls with an outside landline and cellular call  
simultaneously  
1. During the outside landline and cellular ꢁ-way conference call, press the TALK  
button on another standby handset to join the ꢁ-way cellular call  
ꢀ. Press the END/cancel button to terminate both calls  
ꢁ8  
Call Timer  
After you press TALK or SPKR button on the handset, the screen displays the built-in  
call timer and begins counting the length of time of the call. The time will display for ꢁ  
seconds after the call has ended.  
Auto Stand-by  
Placing the cordless handset in the charge cradle while the handset is Off the hook  
(or during a call) automatically hangs up the handset.  
Flash/Call Waiting  
If you subscribe to the combined Call Waiting Caller ID service from your local  
telephone company, you will receive Caller ID information (if available) on Call Waiting  
calls. During a phone call, you will hear a beep to indicate another call is waiting on the  
line and Caller ID information for the waiting call shows on the handset display.  
To connect to the waiting call, press the DELETE/flash button on the handset, and  
your original call is put on hold.  
To switch between the two calls, press the DELETE/flash button.  
NOTE: Some cellular phones do not support this feature, refer to  
your cellular devices instruction Manual.  
Last Number Redial  
You may redial a number up to ꢁꢀ digits long.  
To quickly redial the last number you dialed:  
1. Press the TALK or SPKR button on the handset or press the Cell (SKR) button to dial the  
number.  
ꢀ. Press the  
button, the number dials automatically.  
-OR-  
To quickly choose from any of the last three numbers you dialed:  
1. Press the button first, then use the or button to select the  
desired redial number.  
ꢀ. Press the TALK or SPKR button on the handset, the number dials automatically.  
-OR-  
If you get a busy signal and want to keep dialing the number, press the  
to quickly redial the number.  
button  
ꢁ9  
Page  
The page feature helps you locate a misplaced handset. To send and receive  
pages, all handsets must be registered. If your handset is not registered, follow the  
instructions in the Registration section of this manual.  
Paging from the Base/Group Page  
Use the base-only to page all registered handsets at the same time.  
1. Make sure the phone is OFF (not in talk mode).  
ꢀ. Press the Page button on the base.  
ꢁ. All registered handsets beep for two minutes and the screen displays PAGING.  
4. To cancel the page, press the Page button on the base, or press any button on  
each handset.  
Mute  
To have a private, off-line conversation, use the mute feature. The party on the other  
end of the line cannot hear you, but you can still hear them.  
When you are using the phone, press the MUTE button on handset to activate the  
mute function. The screen displays Mute On. To de-activate, press the MUTE button  
on handset again.  
Ringer Volume (Short-cut)  
There are two ways to set the ringer volume. One is via the handset menu as  
described in the section Programming the Telephone-->Sound Setting-->Ringer  
Volume, while the other one is this short-cut.  
1. Make sure the phone is OFF (not in talk mode).  
ꢀ. Press and hold the #PAUSE/ringer button until the screen displays the Ring  
Volume menu.  
ꢁ. Use the  
or  
button to scroll to the desired ringer volume. The default is  
Volume 5.  
4. Press the Select (SKL) button to save your selection. You will hear a confirmation  
tone.  
40  
Caller ID (CID)  
IMPORTANT: In order to use this unit’s Caller ID features, you must  
subscribe to either the standard Name/Number Caller ID Service or  
Call Waiting Caller ID Service. To know who is calling while you are  
on the phone, you must subscribe to Call Waiting Caller ID Service.  
This unit receives and displays information transmitted by your local phone company.  
This information can include the phone number, date, and time; or the name, phone  
number, date, and time.  
NOTE: Unit will not display time and date setting from incoming  
cellular calls.  
Number of new  
calls received  
Time call  
received  
NEW  
REPT  
06:12 p  
05/06  
03  
Caller’s Name  
Date call  
received  
GE SUPPORT  
1-800-448-0329  
Caller’s phone number  
Call Waiting Caller ID  
Provided you subscribe to Call Waiting Caller ID service from your phone company;  
if you receive an incoming call and you are using the GE multi handset system, a beep  
indicates the presence of a Call Waiting call on the line. The Call Waiting Caller ID  
information will be displayed and stored in the history of all handsets in the system.  
When you hear the call waiting beep in the handset receiver, press the DELETE/  
flash button to put the current call on hold and answer the incoming call.  
Press the DELETE/flash button again to return to the original call.  
CID Error Codes  
Various Caller ID error messages may appear on the display. Refer to the Display  
Messages section of this User’s Guide for more information.  
41  
Receiving CID Records  
When you receive a call, the Caller ID information is transmitted between the first and  
second ring. The Caller ID information appears on the display while the phone rings,  
giving you a chance to monitor the information and decide whether or not to answer  
the call.  
Storing CID Records (In CID Memory)  
If you are not at home or cannot answer, your telephone’s Caller ID memory stores  
the data for the 40 most recent calls you received so you can see who called while  
you were unavailable. When the 41st call is received, the oldest Caller ID record (1st  
call) is automatically deleted.  
You may review the stored information at any time. Calls received since your last  
review show on the top line of the display as; All=XX, New=XX.  
Reviewing CID Records  
As calls are received and stored, the display is updated to let you know how many  
calls have been received. To scroll CID records:  
1. Make sure the phone is OFF (not in talk mode).  
ꢀ. Press the  
button. (a total of All calls and New calls displays.)  
ꢁ. Press the View (SKL) button.  
4. Press the  
5. Press the  
button to review the newest CID record.  
button to review the oldest CID record first.  
Dialing a CID Number  
1. Make sure the phone is OFF (not in TALK mode).  
ꢀ. Press the  
ꢁ. Press the View (SKL) button.  
4. Use the or button to display the desired record.  
button.  
5. Press the TALK or SPKR button. The number dials automatically.  
4ꢀ  
Formatting a CID Number Before Dialing  
NOTE: Depending on (a) how the incoming caller’s phone number is  
formatted when it is received, and (b) whether or not you previously  
preprogrammed your local area code into the PHONE SETTING  
menu, you may need to adjust the format of the incoming caller’s  
stored phone number before calling back the record.  
If the number does not dial as shown, follow steps below to format it:  
1. Make sure the phone is OFF (not in talk mode).  
ꢀ. Press the  
ꢁ. Press the View (SKL) button or press the  
4. Use the or button to scroll to the desired CID record.  
button.  
button again.  
5. Press the More (SKL) button.  
6. Press the Select (SKL) button.  
7. Press the Format (SKL) button to change the format of the displayed number.  
8. Press the TALK or SPKR button. The formatted number dials automatically.  
NOTE: TO dial from cellular line, press Back (SKR), then press the Cell  
(SKR) button.  
Available formats include:  
Number of digits  
Explanation  
Example  
Eleven digits  
long distance code “1 ”  
+ꢁ-digit area code  
1-ꢁ17-888-8888  
+7-digit telephone number.  
Ten digits  
ꢁ-digit area code +  
7-digit telephone number.  
ꢁ17-888-8888  
888-8888  
Seven digits  
7-digit telephone number.  
4ꢁ  
Storing CID Records into Phone Book  
You may also store CID information in the Phone Book.  
NOTE: It is important that you format CID records correctly for  
dialing out BEFORE storing in the Phone Book as you cannot  
reformat CID records stored in memory.  
1. Make sure the phone is OFF (not in talk mode).  
ꢀ. Press the  
ꢁ. Press the View (SKL) button or press the  
4. Use the or button to scroll to the desired CID record.  
5. Press the More (SKL) button.  
6. Use the or button to scroll to Store.  
button.  
button again.  
7. Press the Select (SKL) button.  
8. The screen displays the CID numbers. Refer to “Adding Phone Book Entries” section  
to save the record.  
NOTE: If the selected CID record contains any information that is  
non-numeric, the unit will not allow this record to transfer to the  
phone book.  
Deleting a CID Record  
1. Make sure the phone is OFF (not in TALK mode).  
ꢀ. Press the  
ꢁ. Press the View (SKL) button.  
4. Use the or button to scroll to the CID record.  
button.  
5. Press the DELETE/flash button to show DELETE?.  
NOTE: To delete all CID records, press and hold the DELETE/flash  
button.  
6. Press the Yes (SKL) button to confirm the deletion. The screens displays DELETED.  
NOTE: Press the No (SKR) button to return to the stand-by mode or  
if no action is taken, it will exit automatically after one minute.  
44  
Connecting the Belt Clip  
1. To attach the belt clip, insert the sides of the belt clip into the slots on each side of  
the handset.  
ꢀ. Snap the ends of the belt clip into place.  
Connecting Optional Headset  
Each handset can be used with an optional headset for hands free operation.  
1. Connect the headset to the headset jack on the side of the handset. The  
handset receiver and microphone are disabled when the headset is connected.  
ꢀ. Adjust the headset to rest comfortably on top of your head and over your ear.  
Move the microphone to approximately two to three inches from your mouth.  
ꢁ. Press the TALK button to answer a call or make calls using the headset.  
4. To return to normal operation, unplug the headset from the jack.  
Changing the Battery  
CAUTION: To reduce the risk of fire or personal injury, use only  
the Thomson Inc. approved model 5-2840 Nickel-metal Hydride  
battery (Ni-MH), which is compatible with this unit.  
1. Make sure the telephone is OFF (not in TALK mode) before you replace the battery.  
ꢀ. Remove the battery compartment door.  
ꢁ. Disconnect the cord attached to the battery pack and remove the battery pack  
from the handset.  
4. Insert the new battery pack and connect the cord to the jack inside the battery  
compartment.  
5. Put the battery compartment door back on.  
6. Place handset in the charge cradle to charge. Allow the handset battery to  
properly charge (for 16 hours) prior to first use or when you install a new  
battery pack. If you do not properly charge the phone, battery performance  
will be compromised.  
45  
Battery Safety Precautions  
Do not burn, disassemble, mutilate, or puncture. Like other batteries of this type,  
toxic materials could be released which can cause injury.  
To reduce the risk of fire or personal injury, use only the Nickel-metal Hydride  
battery listed in the User’s Guide.  
Keep batteries out of the reach of children.  
Remove batteries if storing over ꢁ0 days.  
NOTE: The RBRC seal on the battery used in your Thomson Inc. product  
indicates that we are participating in a program to collect and recycle the  
rechargeable battery (or batteries).  
or call 1-800-8-BATTERY or contact a local recycling center.  
Display Messages  
The following indicators show the status of a message or of the unit.  
BLOCKED NUMBER The person is calling from a number that has been blocked  
from transmission.  
CHARGING...  
Indicates the handset need to charge for a period of time  
before it can resume normal function.  
DELETE ALL?  
Prompt asking if you want to erase all Caller ID records.  
DELETE CALL ID?  
Prompt asking if you want to erase the Caller ID record that is  
shown on the display.  
DELETE?  
Prompt asking if you want to erase one of the ꢀ00 records  
stored in the phone’s memory.  
END OF LIST  
ENTER NAME  
Indicates that there is no additional information in Caller ID  
memory.  
Prompt telling you to enter the name in one of the ꢀ00 memory  
locations.  
46  
ENTER NUMBER  
HANDSET NAME  
Prompt telling you to enter a telephone number in one of the  
ꢀ00 memory locations.  
Prompt telling you to enter the user name for the registered  
handset.  
HANDSET NEEDS  
REGISTRATION  
Indicates you must register a non-registered handset prior to  
use.  
INCOMPLETE DATA Caller information is interrupted during transmission or the  
phone line is excessively noisy.  
INTERCOM FROM  
LINE IN USE  
LONG DISTANCE  
LOW BATTERY  
NEW  
intercom call from other handset.  
Displays on handset while the line is in use.  
Indicates CID record is from a long distance call.  
Indicates the battery needs to be charged.  
Indicates call or calls have not been reviewed.  
XX represents the number of new CID records not reviewed.  
Indicates there are no CID records in memory.  
No Caller ID information was received.  
NEW CALL XX  
NO CALLS  
NO DATA  
OUT OF RANGE  
May indicate handset is too far away from the base or that  
the power has been interrupted. Move closer and check  
connections.  
PAGING or  
PLEASE REGISTER  
Someone pressed the PAGE button on the base or  
Indicates the handset needs to be registered before use.  
REPEAT  
Repeat call message. Indicates that a new call from the same  
number was received more than once.  
SEARCHING  
SPEAKER  
Indicates handset is searching for the base.  
Indicates the handset is in speakerphone mode.  
UNKNOWN CALLER/ The incoming call is from an area not serviced by Caller ID or  
NAME/NUMBER the information was not sent.  
.
47  
Handset Sound Signals  
Signal  
Meaning  
A long warbling tone (with ringer on)  
Three short beeps  
One long beep  
Signals an incoming call  
Page signal  
Confirmation tone for the  
completion of a function  
One short beep (during room monitoring mode)  
One short beep (every 7 seconds)  
Ring alert tone  
Low battery warning  
Troubleshooting Guide  
Telephone Solutions  
No dial tone  
• Check and repeat installation steps:  
Ensure the base power cord is connected to a working electrical outlet .  
Ensure the telephone line cord is connected to the base and the wall jack.  
• Connect another phone to the same jack; if there is still no dial tone, the problem  
might be your wiring or local service.  
• The handset may be out of range of the base. Move closer to the base.  
• Ensure the battery is properly charged (16 hours).  
• Ensure the battery pack is installed correctly.  
• The handset should beep when you press the TALK button and the charge  
indicator should be lit when the handset rests in the cradle. If not, the battery  
may need to be charged.  
• Place handset in charge cradle for at least ꢀ0 seconds to reset the unit.  
Handset does not ring  
• Make sure the handset ringer switch is set to ON, this can be done through the  
handset setup menu - Ringer Volume.  
• The handset may be out of range. Move closer to the base.  
• You may have too many extension phones on your line. Try unplugging some  
phones.  
• Check for dial tone.  
48  
You experience static, noise, or fading in and out  
• The handset may be out of range of the base. Move closer to the base.  
• Make sure base is not plugged into an outlet with another household appliance.  
If necessary, relocate the base.  
• Charge the battery.  
Unit beeps  
• Clean charging contacts on cordless handset.  
• See solutions for “No dial tone”.  
• Replace the battery.  
Memory Dialing doesn’t work  
• Did you program the memory location keys correctly?  
• Did you follow proper dialing sequence?  
Unit locks up and there is no communication between the base and cordless handset  
• Unplug the AC power adaptor from the wall outlet and the back of the base.  
Remove the handset battery. Wait for ꢁ0 seconds and plug the power adaptor  
back into the base and wall outlet. Reconnect the battery and charge for 16 hours.  
Handset displays SEARCHING or OUT OF RANGE and cannot link up with the base  
when the TALK button is pressed.  
• Handset may be out of range of the base. Move closer to the base.  
• Make sure the power adaptor is properly installed.  
• Disconnect the handset battery and plug it in again. Place the handset on the  
cradle for at least ꢀ to ꢁ minutes.  
• Disconnect the power adaptor and plug it in again. Then place the handset on  
the cradle for at least ꢀ to ꢁ minutes.  
Handset displays HANDSET NEEDS REGISTRATION  
• Follow the programming in the telephone procedures to re-register the handset  
to the base.  
• Press the Select (SKL) button to begin handset registration. Follow instructions  
on Handset screen.  
49  
Caller ID Solutions  
No Display  
• Charge the battery (for 16 hours). Or replace the battery.  
• Make sure that the unit is connected to a non-switched electrical outlet.  
Disconnect the AC power adaptor from the base and reconnect it.  
Caller ID Error Message  
• The unit displays this message if it detects anything other than valid Caller ID  
information during the silent period after the first ring. This message indicates  
the presence of noise on the line.  
No Caller ID  
• In order to receive Caller ID information, you must subscribe to the standard  
name/number Caller ID service from your local telephone company.  
Battery Solutions  
If you experience any of the following problems, even after fully recharging the  
battery, you may need to replace the battery pack:  
• Short talk time  
• Poor sound quality  
• Charge indicator on the cradle fails to illuminate.  
• Limited range  
50  
Causes of Poor Reception  
• Aluminum siding.  
• Foil backing on insulation.  
• Heating ducts and other metal construction that can shield radio signals.  
• You’re too close to appliances such as microwaves, stoves, computers, etc.  
• Atmospheric conditions, such as strong storms.  
• Base is installed in the basement or lower floor of the house.  
• Base is plugged into AC outlet with other electronic devices.  
• Baby monitor is using the same frequency.  
• Handset battery is low.  
General Product Care  
To keep your unit working and looking good, follow these guidelines:  
• Avoid dropping the handset, as well as other rough treatment to the phone.  
• Clean the phone with a soft cloth.  
• Never use a strong cleaning agent or abrasive powder because this will damage  
the finish.  
• Retain the original packaging in case you need to ship the phone at a later date.  
• Periodically clean the charge contacts on the handset and remote charger with  
a clean pencil eraser.  
51  
Warranty  
Thomson Multimedia Ltd., warrants to the purchaser or gift recipient that if any  
manufacturing defect becomes apparent in this product within 1 year from  
the original date of purchase, it will be replaced free of charge, including return  
transportation.  
This warranty does not include damage to the product resulting from accidents,  
misuse or leaking batteries.  
Should your product not perform properly during the warranty period, either:  
1. Return it to the selling dealer with proof of purchase for replacement,  
OR  
ꢀ. Call 1-800-5ꢀꢀ-0ꢁꢁ8 (English) or 1-800-5ꢀꢀ-0445 (French) for instructions  
concerning where to mail the product.  
The provisions of this written warranty are in addition to and not a modification of or  
subtraction from the statutory warranties and other rights and remedies contained  
in any applicable legislation, and to the extent that any such provisions purport  
to disclaim, exclude or limit any such statutory warranties and other rights and  
remedies, such provisions shall be deemed to be amended to the extent necessary  
to comply therewith.  
Attach your sales receipt to this booklet for future reference. This information is  
required if service is needed during the warranty period.  
PURCHASE DATE ______________________________________________________  
NAME OF STORE _________________________________________________________  
5ꢀ  
Accessory Information  
DESCRIPTION  
MODEL NO.  
5-2812  
5-2717  
AC power adapter  
Belt Clip  
Headset  
Replacement Handset Battery  
5-2425 (black)  
5-2840  
To order, call the nearest distributor for your area;  
Ontario: (905) 6ꢀ4-8516  
Manitoba: (ꢀ04) 78ꢁ-ꢀ088  
British Columbia: (604) 4ꢁ8-8001 Quebec: (514) ꢁ5ꢀ-9071  
A shipping and handling fee will be charged upon ordering.  
It is required by law to collect appropriate sales tax for each individual state, country,  
and locality to which the merchandise is being sent. Items are subject to availability.  
5ꢁ  
Index  
ꢁ-way conference calls with...  
4-way conference calls with...  
Deleting a Phone Book Record  
Deleting a Reminder Record  
Deleting the Phone Book Entries  
In Desired Group  
Deleting the Speed Dialing Number  
Device Info  
Dialed Calls  
17  
ꢀ5  
ꢁ8  
ꢁ8  
18  
19  
ꢁꢁ  
ꢀ1  
4ꢀ  
9
A
Accessory Information  
Adding a Reminder  
Adding Phone Book Entries  
Adding the Phone Book Entries  
In Desired Group  
5ꢁ  
ꢀꢁ  
14  
Dialing a CID Number  
Digital Security System  
Disconnect  
18  
19  
ꢀ1  
ꢁ5  
ꢁꢁ  
ꢁ9  
ꢁ7  
1ꢁ  
46  
Adding the Speed Dialing Number  
Alarm  
Answering a Call  
Auto Connect  
Auto Standby  
Available Options During a Cell Call  
Available Options During a Landline Call ꢁ6  
Display Messages  
E
Editing a Phone Book Record  
Editing the Speed Dialing Number  
Equalizer  
17  
19  
ꢁ1  
ꢀ5  
Extra Features  
B
F
Base Layout  
11  
1ꢀ  
46  
50  
7
ꢁꢁ  
1ꢁ  
FCC RF Radiation Exposure Statement  
Flash/Call Waiting  
Base Station  
ꢁ9  
Battery Safety Precautions  
Battery Solutions  
Before You Begin  
Bluetooth®  
Formatting a CID Number Before Dialing 4ꢁ  
G
General Product Care  
Global De-Registration  
51  
ꢁ0  
BlueTooth® Setup  
H
C
Handset Layout  
10  
ꢀ9  
Call Records  
ꢀ0  
ꢁ9  
41  
41  
50  
51  
ꢁ5  
45  
18  
41  
ꢁ8  
1ꢁ  
45  
45  
Handset Name  
Call Timer  
Call Waiting Caller ID  
Caller ID (CID)  
Caller ID Solutions  
Causes of Poor Reception  
Cellular Calls  
Changing the Battery  
Changing the Group Name  
CID Error Codes  
Conference  
Connect  
Connecting Optional Headset  
Connecting the Belt Clip  
Handset Sound Signals  
Handset to Handset Intercom Call  
Hearing Aid Compatibility (HAC)  
Hold  
48  
ꢀ6  
ꢁ6,ꢁ7  
I
Important Information  
Important Installation Guidelines  
IN USE Indicator on the Base  
Information for DECT Product  
9
ꢁ4  
Inserting a Pause in the Dialing Sequence 16  
Installation  
9
11  
11  
ꢁ7  
ꢀ6  
Installing the Handset Battery  
Installing the Phone  
Intercom  
D
Default Setting  
Deleting a CID Record  
ꢁ1  
44  
Intercom Operation  
54  
Index  
Reviewing CID Records  
Reviewing Phone Book Records  
Ringer Tone  
4ꢀ  
16  
ꢁꢀ  
ꢁꢀ  
40  
ꢀ5  
Interference Information  
Introduction  
7
K
Ringer Volume  
Key Tone  
ꢁꢀ  
Ringer Volume (Shortcut)  
Room Monitoring  
L
Landline Calls  
Language  
Last Number Redial  
Licensing  
ꢁ4,ꢁ5  
ꢀ8  
S
Scheduler  
ꢀꢁ  
ꢀꢀ,ꢀ4  
ꢀ1  
ꢁ9  
Set Alarm Melody  
Set Alarm Time  
Set Area Code  
ꢀ8  
M
Set Cycle Time  
ꢀꢀ,ꢀ4  
ꢀ8  
Making a Call  
ꢁ4  
19  
Set Date/Time  
Managing Speed Dialing Record  
Set Group Ring  
18  
Managing the Record Grouping  
Set Snooze  
Snooze  
ꢀꢁ  
in Phone Book  
18  
ꢁ6,ꢁ7  
40  
ꢀꢀ  
More  
Mute  
Sound Setting  
ꢁ1  
Speakerphone Operation  
Storing CID Records (In CID Memory)  
Storing CID Records into Phone Book  
Storing the Last Number Dialed  
ꢁ4  
4ꢀ  
P
44  
Page  
40  
40  
7
14  
ꢀ7  
14  
14  
ꢀ7  
16  
Paging from the Base/Group Page  
Parts Checklist  
T
Phone Book  
Phone Setting  
Programming Information  
Programming The Handset  
Push to Talk  
Table of Contents  
5
TALK Indicator and SPKR  
Indicator on the Handset  
Telephone Jack Requirements  
Telephone Network Information  
Telephone Operation  
Telephone Solutions  
Tone/Pulse  
ꢁ4  
8
ꢁ4  
48  
ꢀ9  
ꢁ7  
R
Received Calls  
ꢀ0  
ꢁ6  
Receiving a Cellular Call during  
Transfer to Cell  
a Landline Call  
Transferring the Phone book  
record between handset(s)  
Troubleshooting Guide  
Receiving a Landline Call during  
a Cellular Call  
ꢀ0  
48  
ꢁ6  
ꢀ7  
4ꢀ  
Receiving an Intercom Call  
Receiving CID Records  
Receiving Land line Call And Cell Call  
Simultaneously  
V
Visual Indicators  
VMWI Indicator on Handset  
Volume Settings  
ꢁ4  
ꢁ4  
ꢁ4  
ꢁ6  
1ꢁ  
ꢀ9  
Reconnect  
Registration  
REN Numer  
W
Reviewing and Editing  
Warranty  
5ꢀ  
the Reminder Record  
ꢀ4  
55  
Visit the GE website at: www.GE.com/phones  
Thomson Multimedia Ltd.  
ꢁ0 Eglinton Ave W., Suite ꢁ04  
Mississauga, ON Canada L5R ꢁE7  
© ꢀ008 Thomson Multimedia Ltd.  
Trademark(s) ® Registered  
Model ꢀ81ꢀ7  
000ꢀ6164 (Rev. 0 CAN E)  
08-18  
Printed in China  
Marque(s) ® déposée(s)  

HP Hewlett Packard HP W2072a 20 LED LCD Monitor A3M50AA#ABA User Manual
Hotpoint Cooktop DSG60S User Manual
Gaggenau KG 260 CA User Manual
Frigidaire FFEC3605LB User Manual
Diamond Multimedia Radeon X1650PRO User Manual
Cypress CY7C1414AV18 User Manual
Cannon 50cm Free Standing Gas Cooker C50GLW User Manual
AT T EL52409 User Manual
Asus Crosshair V Formula Z CROSSHAIRVFORMULAZ User Manual
Asus Computer Monitor VW223S User Manual