GE 28011 User Manual

Model 28011  
Optional/Additional  
5.8GHz Color Handset  
User’s Guide  
for use ONLY with  
System 28031, TC28031,  
28041 or TC28041 Series  
Interference Information  
This device complies with Part 15 of the FCC Rules. Operation is subject to the  
following two conditions: (1) This device may not cause harmful interference; and (ꢀ)  
This device must accept any interference received, including interference that may  
cause undesired operation.  
This equipment has been tested and found to comply with the limits for a Class  
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed  
to provide reasonable protection against harmful interference in a residential  
installation.  
This equipment generates, uses, and can radiate radio frequency energy and, if  
not installed and used in accordance with the instructions, may cause harmful  
interference to radio communications. However, there is no guarantee that  
interference will not occur in a particular installation.  
Privacy of Communications may not be ensured when using this product.  
If this equipment does cause harmful interference to radio or television reception,  
which can be determined by turning the equipment off and on, the user is encouraged  
to try to correct the interference by one or more of the following measures:  
• Reorient or relocate the receiving antenna (that is, the antenna for radio or  
television that is “receiving” the interference).  
• Reorient or relocate and increase the separation between the  
telecommunications equipment and receiving antenna.  
• Connect the telecommunications equipment into an outlet on a circuit different  
from that to which the receiving antenna is connected.  
If these measures do not eliminate the interference, please consult your dealer or an  
experienced radio/television technician for additional suggestions. Also, the Federal  
Communications Commission has prepared a helpful booklet, “How To Identify and  
Resolve Radio/TV Interference Problems.” This booklet is available from the U.S.  
Government Printing Office, Washington, D.C. ꢀ040ꢀ. Please specify stock number  
004-000-00345-4 when ordering copies.  
Notice: The changes or modifications not expressly approved by the party responsible  
for compliance could void the user's authority to operate the equipment.  
Hearing Aid Compatibility (HAC)  
This telephone system meets FCC standards for Hearing Aid Compatibility.  
Licensing  
Licensed under US Patent 6,4ꢀ7,009.  
FCC RF Radiation Exposure Statement  
This equipment complies with FCC RF radiation exposure limits set forth for an  
uncontrolled environment. This equipment should be installed and operated with  
a minimum distance of ꢀ0 centimeters between the radiator and your body. This  
transmitter must not be co-located or operated in conjunction with any other  
antenna or transmitter.”  
For body worn operation, this phone has been tested and meets the FCC RF  
exposure guidelines when used with the belt clip supplied with this product. Use of  
other accessories may not ensure compliance with FCC RF exposure guidelines.  
3
Table of Contents  
EquipmEnt ApprovAl informAtion ........2  
intErfErEncE informAtion....................3  
HEAring Aid compAtibility (HAc) ........3  
licEnsing ............................................3  
fcc rf rAdiAtion ExposurE stAtEmEnt3  
introduction ......................................6  
bEforE you bEgin ...............................6  
Parts CheCklist ................................... 6  
telePhone JaCk requirements............ 6  
instAllAtion ........................................7  
Digital seCurity system....................... 7  
imPortant installation guiDelines..... 7  
HAndsEt lAyout ..................................8  
instAlling tHE pHonE...........................9  
installing the hanDset Battery......... 9  
extra Charging CraDle....................... 9  
registration.........................................10  
progrAmming tHE tElEpHonE ............ 10  
Phone setting.....................................11  
language........................................11  
area CoDe......................................11  
hanDset name...............................12  
Deregistration...............................12  
gloBal De-registration ..............13  
Default setting.............................13  
DisPlay setting ..................................14  
WallPaPer ......................................14  
Color sCheme................................14  
set Contrast .................................15  
sounD setting ...................................15  
ringer Volume...............................15  
ringer tone ...................................15  
key tone.........................................16  
AnswEring systEm rEmotE AccEss .... 16  
remote aCCess from  
tElEpHonE opErAtion ....................... 18  
Charge/in use inDiCator  
on the Base ..................................18  
Visual ring inDiCator  
on the hanDset...........................18  
stanDBy sCreen .............................18  
making a Call.....................................18  
ansWering a Call...............................18  
Volume .................................................18  
Call timer............................................18  
auto stanDBy ......................................18  
flash/Call Waiting...........................19  
last numBer reDial ...........................19  
exit........................................................19  
Page ......................................................19  
Paging from the Base/  
grouP Page .................................19  
hanDset to hanDset Paging.......20  
mute .....................................................20  
ringer Volume (shortCut)................20  
Do not DisturB (DnD) ....................21  
room monitor ....................................21  
intErcom opErAtion ......................... 22  
hanDset to hanDset interCom Call22  
reCeiVing an interCom Call..............22  
aDVanCeD interCom features ...........22  
reCeiVing an inComing Call  
During an interCom Call..........22  
using interCom With  
external telePhone Calls ........23  
tWo-Way Calling.........................23  
three-Way ConferenCing.............23  
Call transfer .....................................24  
transferring Calls to  
other hanDsets..........................24  
cAllEr id (cid)............................... 24  
Call Waiting Caller iD....................24  
CiD error CoDes ...............................25  
reCeiVing CiD reCorDs .....................25  
storing CiD reCorDs  
CorDless hanDset............................16  
remote aCCess seCurity CoDe..........16  
ring to ansWer ..................................17  
neW message alert...........................17  
sCreening Calls from the hanDset 17  
(in CiD memory)...............................25  
reVieWing CiD reCorDs ....................25  
Dialing a CiD numBer.......................25  
formatting a CiD numBer  
Before Dialing..................................25  
storing CiD reCorDs  
into Phone Book..............................26  
Deleting a CiD reCorD .....................27  
Deleting all CiD reCorDs ...............27  
4
Table of Contents  
to Phone Book reCorD...................35  
bElt clip And optionAl HEAdsEt ...... 35  
ConneCting the Belt CliP..................35  
ConneCting an oPtional heaDset  
pHonE book..................................... 27  
aDDing Phone Book entries ............27  
storing the last numBer DialeD.....29  
inserting a Pause in the Dialing  
to the hanDset .................................35  
cHAnging tHE bAttEry ...................... 35  
bAttEry sAfEty prEcAutions ............. 36  
displAy mEssAgEs ............................. 36  
HAndsEt sound signAls ................... 38  
troublEsHooting guidE.................... 38  
telePhone solutions....................38  
sequenCe (of a storeD numBer)  
reVieWing Phone Book reCorDs .....29  
eDiting a Phone Book reCorD .........30  
Deleting a Phone Book reCorD ......30  
Dialing a Phone Book reCorD.........30  
Chain Dialing from Phone Book.....31  
picturE downloAd........................... 31  
DoWnloaD your oWn image ............31  
one-time softWare installation31  
image eDiting .................................31  
image DoWnloaDing ...........................32  
Choosing the DoWnloaDeD  
Caller iD solutions.....................39  
Battery solutions.........................40  
cAusEs of poor rEcEption................ 40  
gEnErAl product cArE .................... 40  
sErvicE............................................. 41  
AccEssory informAtion .................... 41  
limitEd wArrAnty............................ 42  
indEx ........................................44, 45  
image as WallPaPer .........................32  
assigning the DoWnloaDeD  
image to Phone Book reCorD........32  
rEcording ringEr tonEs .................. 32  
reCorD your oWn ringer tones ....32  
reCorD With inCluDeD auDio  
CaBle or an oPtional heaDset 33  
reCorD With the hanDset  
miCroPhone ......................................34  
Choosing the reCorDeD sounD CliP  
as ringer tone .................................35  
assigning the reCorDeD sounD CliP  
CAUTION:  
RISKOFELECTRICSHOCK  
DONOTOPEN  
THE EXCLAMATION  
POINT WITHIN THE  
TRIANGLE IS A  
THE LIGHTNING  
CAUTION: TO REDUCE THE  
FLASH AND ARROW RISK OF ELECTRIC SHOCK, DO  
HEAD WITHIN THE NOT REMOVE COVER (OR  
WARNING:TO  
WARNING SIGN  
ALERTING YOU OF  
IMPORTANT  
BACK). NO USER  
PREVENT FIRE OR  
ELECTRICAL SHOCK  
HAZARD, DO NOT  
EXPOSETHIS  
TRIANGLE IS A  
WARNING SIGN  
ALERTING YOU OF  
“DANGEROUS  
VOLTAGE” INSIDE  
THE PRODUCT.  
SERVICEABLE PARTS INSIDE.  
REFER SERVICING TO  
QUALIFIED SERVICE  
PERSONNEL.  
INSTRUCTIONS  
ACCOMPANYING  
THE PRODUCT.  
PRODUCT TO RAIN  
OR MOISTURE.  
SEE MARKING ON BOTTOM / BACK OF PRODUCT  
5
Introduction  
CAUTION: When using telephone equipment, there are  
basic safety instructions that should always be followed.  
Refer to the IMPORTANT SAFETY INSTRUCTIONS provided  
with this product and save them for future reference.  
IMPORTANT: Because cordless phones operate on electricity,  
you should have at least one phone in your home that isn’t  
cordless, in case the power in your home goes out.  
Before You Begin  
Parts Checklist (for model 28011xx1)  
Make sure your package includes the items shown here.  
Charge  
Battery  
Handset  
Cradle  
compartment  
cover  
battery pack  
Handset  
Image  
USB  
Editor  
download  
cable  
Belt clip  
Software  
Telephone Jack Requirements  
Wall plate  
To use this phone, you need an RJ11C type  
modular telephone jack, which might look like the  
one pictured here, installed in your home. If you  
don’t have a modular jack, call your local phone  
company to find out how to get one installed.  
Modular  
telephone  
line jack  
6
Installation  
Digital Security System  
Your cordless phone uses a digital security system to protect against false  
ringing, unauthorized access, and charges to your phone line.  
INSTALLATION NOTE: Some cordless telephones operate  
at frequencies that may cause or receive interference  
with nearby TVs, microwave ovens, and VCRs. To minimize  
or prevent such interference, the base of the cordless  
telephone should not be placed near or on top of a TV,  
microwave ovens, or VCR. If such interference continues,  
move the cordless telephone farther away from these  
appliances.  
Certain other communications devices may also use  
the 5.8 GHz frequency for communication, and, if not  
properly set, these devices may interfere with each  
other and/or your new telephone. If you are concerned  
with interference, please refer to the owner’s manual for  
these devices on how to properly set channels to avoid  
interference. Typical devices that may use the 5.8 GHz  
frequency for communication include wireless audio/video  
senders, wireless computer networks, multi-handset  
cordless telephone systems, and some long-range cordless  
telephone systems.  
Important Installation Guidelines  
• Avoid sources of noise and heat, such as motors, fluorescent lighting,  
microwave ovens, heating appliances and direct sunlight.  
Avoid areas of excessive dust, moisture and low temperature.  
Avoid other cordless telephones or personal computers.  
• Never install telephone wiring during a lightning storm.  
• Never install telephone jacks in wet locations unless the jack is  
specifically designed for wet locations.  
• Never touch non-insulated telephone wires or terminals, unless the  
telephone line has been disconnected at the network interface.  
• Use caution when installing or modifying telephone lines.  
7
Handset Layout  
RING  
INDICATOR  
EARPIECE  
display  
TALK/CALL BACK  
(button)  
MENU  
SELECT/MUTE  
(button)  
(button)  
CALLER ID-VOLUME  
(button)  
CALLER ID-VOLUME  
(button)  
PHONEBOOK  
(button)  
SPEAKER  
(button)  
REDIAL  
(button)  
rev (review  
button)  
skip (button)  
play (button)  
* EXIT  
(button)  
# PAUSE/  
erase  
RINGER (button)  
(button)  
FLASH/  
DELETE  
(button)  
INTERCOM  
(button)  
microphone  
8
Installing the Phone  
Installing the Handset Battery  
NOTE: You must connect the handset battery before using  
the cordless handsets.  
CAUTION: To reduce the risk of fire or personal  
injury, use only the Thomson Inc. approved Nickel-  
metal Hydride battery (Ni-MH) model 5-2660, which is  
compatible with this unit.  
1. Locate battery and battery door which are packaged together inside a  
plastic bag and are separate from the handset.  
ꢀ. Locate the battery compartment on the back of the handset.  
3. Plug the battery pack cord into the jack inside the compartment.  
NOTE: It is important to maintain the polarity (black and  
red wires) to the jack inside the compartment. To ensure  
proper battery installation, the connector is keyed and can be  
inserted only one way.  
battery  
pack  
black wire  
PRESS DOWN  
FIRMLY  
red wire  
4. Insert the battery pack.  
5. Close the battery compartment by pushing the door up until it snaps  
into place.  
Extra Charging Cradle  
1. Plug the AC power converter of the extra charging cradle into the  
electrical outlet.  
ꢀ. Place the handset in the extra charging cradle. The charge indicator  
turns on, verifying the battery is charging.  
Allow handset to charge for 16 hours prior to first use. If you do not  
properly charge the handset, battery performance is compromised.  
9
Registration  
YOU MUST REGISTER THE HANDSET TO THE MAIN BASE BEFORE USE!  
After the optional handset has charged for 16 hours on the extra charger,  
HANDSET NEEDS REGISTRATION shows in the display.  
1. Press the SELECT button. HOLD BASE PAGE WAIT FOR BEEP shows  
in the display. (Your handset should be held near the base during  
registration process.)  
ꢀ. Press and hold the page button on the base unit until you hear a tone at  
the handset. HANDSET X REGISTERED shows in the handset display,  
where X is the handset number. You may now name your handset.  
Refer to section: "Handset Name."  
Programming the Telephone  
The handset menu gives you access to all of the built-in features. Press  
the MENU button to display the first menu PHONE BOOK, and press 6  
and 5buttons to navigate to the desired menu option. Press the SELECT  
button to activate a menu option. For details on programming, refer to  
the applicable section.  
During programming, you may press the *EXIT button at any time to exit  
the menu and keep the previous setting.  
PHONE BOOK  
Enter and retrieve up to 50 names and  
phone numbers, each can be assigned a  
distinctive ringer tone and image.  
ROOM MONITOR Allows you to monitor any room in your  
house with the accessory handsets.  
INTERCOM  
Talk between handsets or use to page  
each other.  
ANSWERER  
Remotely access the answering system to  
adjust the rings to answer, security code  
and new message alert settings.  
CALL RECORDS  
Review Caller ID data; select and dial from  
the Caller ID data or from the Redial list  
which contains the last 3 phone numbers  
dialed.  
SOUND SETTING Record ringer tone from microphone,  
headset or any audio player; select main  
ringer tone or set key tone.  
10  
PHONE SETTING  
Set display language, set area code,  
register the handset to the base unit,  
name the handset , deregister the  
handset or reset to default setting.  
DISPLAY SETTING Choose a preset or downloaded image to  
be wallpaper of the idle display, set the  
contrast and color scheme.  
Phone Setting  
There are seven programmable menus available: Language, Area Code,  
Intercom Auto Answer, Handset Name, Registration, Deregistration and  
Default Setting.  
1. Make sure your phone is OFF (not in talk  
LANGUAGE  
AREA CODE  
REGISTRATION  
mode).  
ꢀ. Press the MENU button and use the 6or 5  
HANDSET NAME  
button to scroll to PHONE SETTING.  
3. Press the SELECT button to enter the menu.  
DEREGISTRATION  
PHONE SETTING  
Language  
This menu allows you to change the language of the display prompts.  
From the PHONE SETTING menu;  
1. Use the 6or 5 button to scroll to  
LANGUAGE.  
ꢀ. Press the SELECT button to enter the menu.  
ENGLISH  
FRANCAIS  
ESPANOL  
3. Use the 6or 5 button to scroll to the  
desired language. The default is ENGLISH.  
SET LANGUAGE  
4. Press the SELECT button to save your  
selection. You will hear a confirmation tone.  
Area Code  
If you enter your local 3-digit area code in the area code menu, your local  
area code does not display on the Caller ID (CID) list. Instead, you only see  
the local 7-digit number. Calls received from outside your local area code  
will display the full 10-digits.  
From the PHONE SETTING menu;  
1. Use the 6or 5 button to scroll to SET  
AREA CODE.  
ꢀ. Press the SELECT button to enter the menu.  
3. Use the number keys to enter your 3 digit  
area code. “ - - - “ is the default setting.  
SET AREA CODE  
4. Press the SELECT button to save your  
selection. You will hear a confirmation tone.  
11  
NOTE: To restore the default setting to “---”, press and  
release the FLASH/DELETE button when SET AREA CODE  
shows on the display.  
Handset Name  
This menu allows you to enter a name for the handset, which displays on  
the idle screen.  
From the PHONE SETTING menu;  
1. Use the 6or 5 button to scroll to  
HANDSET NAME.  
DANIEL  
ꢀ. Press the SELECT button to enter the menu.  
3. Use the number keys to enter a name (up to  
15 characters). More than one letter is stored  
in each of the number keys. For example, to  
enter Bill Smith, press the ꢀ key twice for the  
letter B. Press the 4 key 3 times for the letter  
I. Press the 5 key 3 times for the letter L. Wait  
for 1 second, press the 5 key 3 times for the  
second letter L, and press the 1 key to insert  
a space between the first and last name.  
Press the 7 key 4 times for the letter S; press  
the 6 key once for the letter M; press the 4  
key 3 times for the letter I. Press the 8 key  
for the letter T; press the 4 key twice for the  
letter H.  
HANDSET NAME  
4. Press the SELECT button to save your  
selection. You will hear a confirmation tone.  
NOTE: If you make a mistake, use the FLASH/DELETE button  
to backspace and delete one character at a time.  
Deregistration  
Deregistration cancels registration. During the deregistration process,  
keep the handset near the base.  
From the PHONE SETTING menu;  
NO  
1. Use the 6or 5 button to scroll to  
DEREGISTRATION.  
YES  
ꢀ. Press the SELECT button to enter the menu.  
3. Use the 6or 5 button to scroll to NO or  
YES. The default is NO.  
DEREGISTRATION  
WARNING: It is not recommended that a handset be  
deregistered unless absolutely necessary because once a  
handset is deregistered, that handset’s telephone features  
cannot be used until the handset is re-registered.  
1ꢀ  
4. Select NO, if you do not want to deregister.  
5. If you select YES, press the SELECT button to  
confirm. MOVE NEAR TO BASE displays for  
ꢀ seconds, then NO YES CONFIRM? shows  
on the display.  
NO  
YES  
CONFIRM?  
6. Use the 6or 5 button to scroll to NO or  
YES. The default is YES.  
DEREGISTRATION  
7. If you select YES, press the SELECT button  
to confirm. DE-REGISTER . . . shows on the  
display followed by a confirmation tone.  
Then, HANDSET X DEREGISTERED shows on  
the display to confirm that the handset is  
deregistered.  
NOTE: When you complete the deregistration process,  
HANDSET NEEDS REGISTRATION shows on the display. To  
use the handset, you must register the handset.  
Global De-Registration  
If one or more handsets become lost, you should de-register all handsets  
to ensure proper system operation. Follow the steps below to deregister  
all handsets at the same time.  
WARNING: It is not recommended that a handset be  
deregistered unless absolutely necessary because once a  
handset is deregistered, that handset’s telephone features  
cannot be used until the handset is re-registered.  
NOTE: Before starting global deregistration procedure, let  
all handsets set idle for 20 seconds.  
1. Press and hold the PAGE button on the base  
until the CHARGE/IN USE indicator on the  
base flashes.  
ꢀ. Press and hold the PAGE button on the base  
again until the CHARGE/IN USE indicator on  
the base flashes rapidly.  
3. Press and release the PAGE button on the  
base once. All handsets are deregistered and  
HANDSET NEEDS REGISTRATION shows on  
their displays.  
Default Setting  
This option allows you to return the handset to factory preset settings.  
From the PHONE SETTING menu;  
1. Use the 6or 5 button to scroll  
to DEFAULT SETTING.  
13  
ꢀ. Press the SELECT button to enter the menu.  
3. Use the 6or 5 button to scroll to NO or  
YES. The default is NO.  
NO  
YES  
4. If you select YES, all the settings in the  
programmable menu are returned to factory  
default setting. You will hear a confirmation  
tone.  
DEFAULT SETTING  
Display Setting  
There are three programmable menus available; Wallpaper, Color Scheme  
and Set Contrast.  
WALLPAPER  
1. Make sure your phone is OFF (not in talk  
mode).  
COLOR SCHEME  
SET CONTRAST  
ꢀ. Press the MENU button and use the 6or 5  
button to scroll to DISPLAY SETTING.  
3. Press the SELECT button to enter the menu.  
DISPLAY SETTING  
Wallpaper  
You may choose from the 10 preset images and/or the downloaded  
images to be wallpaper of the idle display. For details of picture download,  
see the Picture Download section.  
From the DISPLAY SETTING menu;  
1. Use the 6or 5 button to scroll to  
WALLPAPER.  
ꢀ. Press the SELECT button to enter the menu.  
3. Use the 6or 5 button to scroll to the  
desired wallpaper.  
WALLPAPER 01  
4. Press the SELECT button to save your  
selection. You will hear a confirmation tone.  
Color Scheme  
This feature allows you change the background color and the color of the  
highlighter.  
From the DISPLAY SETTING menu;  
1. Use the 6or 5 button to scroll to COLOR  
BLUE  
SCHEME.  
GREEN  
RED  
ꢀ. Press the SELECT button to enter the menu.  
YELLOW  
3. Use the 6or 5 button to scroll to the  
desired color scheme. The default is GREEN.  
COLOR SCHEME  
4. Press the SELECT button to save your  
selection. You will hear a confirmation tone.  
14  
Set Contrast  
This feature allows you change the contrast of the text displayed and the  
background.  
From the DISPLAY SETTING menu;  
1. Use the 6or 5 button to scroll to SET  
CONTRAST.  
ꢀ. Press the SELECT button to enter the menu.  
3. Use the 6or 5 button to scroll to the  
1
* 2  
3
desired contrast, 1, 2 or 3. The default is *2.  
SET CONTRAST  
4. Press the SELECT button to save your  
selection. You will hear a confirmation tone.  
Sound Setting  
There are three programmable menus available: Ringer Volume, Ringer  
Tone and Key Tone  
RINGER VOLUME  
1. Make sure your phone is OFF (not in talk  
RINGER TONE  
KEY TONE  
mode).  
ꢀ. Press the MENU button and use the 6or 5  
button to scroll to SOUND SETTING.  
SOUND SETTING  
3. Press the SELECT button to enter the menu.  
Ringer Volume  
From the SOUND SETTING menu;  
1. Use the 6or 5 button to scroll to RINGER  
HIGH  
VOLUME.  
LOW  
OFF  
ꢀ. Press the SELECT button to enter the menu.  
3. Use the 6or 5 button to scroll to the  
desired ringer volume. The default is RINGER  
LOW.  
RINGER VOLUME  
4. Press the SELECT button to save your  
selection. You will hear a confirmation tone.  
NOTE: If you turn the ringer OFF, the ringer off icon  
shows on the display.  
Ringer Tone  
You may choose from the 10 preset melodies, 10 dual-tone ringer tones  
and/or the recorded ringer tones. For details of recording ringer tone, see  
the section Recording Ringer Tones.  
From the SOUND SETTING menu;  
1. Use the 6or 5 button to scroll to RINGER  
TONE.  
15  
ꢀ. Press the SELECT button to enter the menu.  
3. Use the 6or 5 button to scroll to the  
desired ringer tone. The default is TONE 1.  
REC RING TONE  
RING MELODY 1  
RING MELODY 2  
RING MELODY 3  
4. Press the SELECT button to save your  
selection. You will hear a confirmation tone.  
RING MELODY 4  
SET RINGER TONE  
Key Tone  
From the SOUND SETTING menu;  
1. Use the 6or 5 button to scroll to KEY  
TONE.  
ON  
OFF  
ꢀ. Press the SELECT button to enter the menu.  
3. Use the 6or 5 button to scroll to the  
desired ringer tone. The default is ON.  
SET KEY TONE  
4. Press the SELECT button to save your  
selection. You will hear a confirmation tone.  
Answering System Remote Access  
You may access the answering system with the cordless handset or from  
any tone-dial compatible telephone.  
Remote Access from Cordless Handset  
Use the corresponding handset keys just like you would use the base  
buttons (see “Answering System Setup”).The button functions are located  
on the handset above each number key. For example, to play messages:  
1. Press the MENU button and use 6or 5 button to scroll to ANSWERER.  
ꢀ. Press the SELECT button and use 6or 5 button to select REMOTE  
ACCESS.  
3. Press the SELECT button again, ANSWERER REMOTE ACCESS shows on  
the display.  
4. Press ꢀ (play/stop) followed by the mailbox number to play the  
message in that mailbox. For example, press ꢀ and 3 to play the  
message in mailbox 3.  
5. When you finish listening to your messages, press the *EXIT button.  
Remote Access Security Code  
You can access the answering system from a tone dialing telephone in  
another remote location. The security code is required for remote access,  
and it prevents unauthorized access to your answering system.  
1. Press the MENU button and use 6or 5 button to scroll to ANSWERER.  
ꢀ. Press the SELECT button and use 6or 5 button to select SECURITY  
CODE.  
3. Press the SELECT button again to show the current security code on the  
display. The default setting is 1 2 3.  
16  
4. Use the number keys to enter your new 3-digit security code.  
5. Press the SELECT button to save your selection. You will hear a  
confirmation tone.  
NOTE: If you make a mistake, key in the digits again or press  
the FLASH/DELTE button to erase all and re-enter.  
Ring to Answer  
This feature lets you select the number of times you want the phone to  
ring before the answering system answers the call.  
1. Press the MENU button and use 6or 5 button to scroll to  
ANSWERER.  
ꢀ. Press the SELECT button and use 6or 5 button to select RING TO  
ANSWER.  
3. Press the SELECT button again to show the options of rings on the  
display. The default setting is 5 RINGS.  
4. Use the 6or 5 button to scroll to your selection.  
5. Press the SELECT button to save your selection. You will hear a  
confirmation tone.  
NOTE: If you select TOLL SAVER, the unit answers after the  
3rd ring if there are NEW messages in the answering system,  
OR the unit answers after the 5th ring if there are NO new  
messages. Then, when you access the answering system from  
another remote location, you may hang up after 4 rings to  
save long distance charges.  
New Message Alert  
This feature sets your answering system to sound an alert tone from the  
base every 10 seconds when there are new messages.  
1. Press the MENU button and use 6or 5 button to scroll to  
ANSWERER.  
ꢀ. Press the SELECT button and use 6or 5 to select NEW MSG ALERT.  
3. Press the SELECT button again to show the options, ON or OFF, on the  
display. The default setting is OFF.  
4. Use the 6or 5 button to scroll to your selection.  
5. Press the SELECT button to save your selection. You will hear a  
confirmation tone.  
Screening Calls from the Handset  
Use the handset to screen calls even when you can’t hear the answering  
system.  
When the answering system picks up:  
1. Press the SELECT button to access the answering system.  
17  
ꢀ. Listen as the caller leaves a message.  
3. Press the TALK/CALL BACK or SPEAKER buttons to speak to the person  
or press the SELECT button to stop screening the call.  
Telephone Operation  
CHARGE/IN USE indicator on the base  
The CHARGE/IN USE indicator is lit when the phone is in use or a handset  
is charging in the base charge cradle. It flashes when you receive a call.  
Visual Ring Indicator on the Handset  
The Visual Ring indicator is lit when the handset is in use. It flashes when  
you receive a call.  
Standby Screen  
The handset displays the handset number (or handset name), time,  
battery charge status and wallpaper when idle.  
Making a Call  
1. Pick up the handset, and press the TALK/CALL BACK or SPEAKER button.  
Wait for a dial tone, then dial the desired number.  
-OR-  
Dial the number and then press the TALK/CALL BACK or SPEAKER button.  
ꢀ. When finished, press the TALK/CALL BACK or SPEAKER button or place  
the handset in the base cradle to hang up.  
Answering a Call  
Check the display to see who is calling.  
1. Pick up the handset, and press the TALK/CALL BACK or SPEAKER button  
on the handset.  
ꢀ. When finished, press the TALK/CALL BACK or SPEAKER button or place  
the handset in the base cradle to hang up.  
Volume  
When the handset is ON (in talk mode), you may adjust the receiver  
volume by pressing the 6or 5button. There are four volume levels to  
choose from. When the maximum or minimum volume level is reached,  
the phone beeps twice. VOL 1 is minimum and VOL 4 is maximum.  
Call Timer  
After you press TALK/CALL BACK or SPEAKER button on the handset, the  
built-in call timer shows in the display and begins counting the length of  
time of the call.  
Auto Standby  
Placing the cordless handset in the charge cradle while the handset is off  
the hook (or during a call) automatically hangs up the handset.  
18  
Flash/Call Waiting  
If you subscribe to the combined Call Waiting Caller ID service from your  
local telephone company, you will receive Caller ID information (if available)  
on Call Waiting calls. During a phone call, you will hear a beep to indicate  
another call is waiting on the line and Caller ID information for the waiting  
call shows on the handset display.  
• To connect to the waiting call, press the FLASH/DELETE button on the  
handset, and your original call is put on hold.  
• To switch between the two calls, press the FLASH/DELETE button.  
TIP: Don’t use the TALK/CALL BACK or SPEAKER button on  
the handset to activate custom calling service such as call  
waiting, or you’ll hang up the phone.  
Last Number Redial  
You may redial a number up to 3ꢀ digits long. To quickly redial the last  
number you dialed:  
1. Press the TALK/CALL BACK or SPEAKER button.  
ꢀ. Press the REDIAL button.  
-OR-  
To quickly choose from any of the last three numbers you dialed:  
1. Press the REDIAL button first, then use the 6or 5button to select the  
desired redial number.  
ꢀ. Press the TALK/CALL BACK or SPEAKER button, the number dials  
automatically.  
-OR-  
If you get a busy signal and want to keep dialing the number, press the  
REDIAL button to quickly redial the number.  
Exit  
Press the *EXIT button to exit a menu function and return to the standby  
screen.  
Page  
The page feature helps you locate a misplaced handset. To send and  
receive pages, all handsets must be registered. If your handset is not  
registered, follow the instructions in the Registration section of this  
manual.  
Paging from the Base/Group Page  
Use the base-only to page all registered handsets at the same time.  
1. Make sure the phone is OFF (not in talk mode).  
ꢀ. Press the PAGE button on the base.  
19  
3. All registered handsets beep for two minutes and PAGING FROM BASE  
shows on each handset’s display.  
4. To cancel the page, press the PAGE button on the base, or press the  
TALK/CALL BACK button or the *EXIT button on each handset.  
Handset to Handset Paging  
IMPORTANT NOTE: The following procedures can ONLY be  
done with Model 28011 and 28041 handsets.  
1. Make sure the originating phone is OFF (not in talk mode).  
ꢀ. Press the MENU button and use the 6or 5button to scroll to  
INTERCOM.  
3. Press the SELECT button to enter the menu.  
NOTE: You can press the INT button to shortcut to the menu.  
4. A list of registered handsets shows on the display. Use the 6or 5  
button to scroll to the desired handset you want to page. Or scroll to  
GLOBAL PAGE to page all handsets.  
5. Press the SELECT button.  
6. The receiving handset is paged and emits a tone.  
7. To cancel the page, press the *EXIT, INT or TALK/CALL BACK button on  
the originating handset  
-OR-  
Press the INT button on the receiving handset to enter intercom mode.  
Mute  
To have a private, off-line conversation, use the mute feature. The party  
on the other end of the line cannot hear you, but you can still hear them.  
When you are using the phone, press the SELECT button to activate the  
mute function. To de-activate, press the SELECT button again.  
Ringer Volume (Shortcut)  
There are two ways to set the ringer volume. One is via the handset  
menu as described in the section Telephone Setup/ Sound Setting/Ringer  
Volume, while the other one is this short cut.  
HIGH  
1. Make sure the phone is OFF (not in talk mode).  
ꢀ. Press the #PAUSE/RINGER button to enter  
the RINGER VOLUME menu.  
LOW  
OFF  
3. Use the 6or 5button to scroll to the  
desired ringer volume.  
RINGER VOLUME  
The default is LOW.  
4. Press the SELECT or #PAUSE/RINGER button  
again to save your selection. You will hear a  
confirmation tone.  
ꢀ0  
Do Not Disturb (DND)  
This feature allows you to turn off all the handset ringer(s) at once,by  
pressing one button at the base unit, even though the ringer volume of  
handset(s) has been set to HIGH or LOW.  
1. In the standby mode, press the DO NOT DISTURB button on the base.  
ꢀ. The DND indicator will light and DO NOT DISTURB shows in each  
handset display.  
3. To cancel, press the DO NOT DISTURB button again.  
NOTE: You can press the DO NOT DISTURB button and  
activate the function immediately, even when there is  
incoming call ringing in, or during call screening after the  
call is taken by the answerer.  
Room Monitor  
(This is only applicable when ꢀ or more handsets are registered to the  
same base unit.  
IMPORTANT NOTE: The following procedures can ONLY be  
done with Model 28011 and 28041 handsets.  
1. Make sure your handset and the handset to be monitored are not in  
talk mode.  
ꢀ. Press the MENU button and use the 6or 5button to scroll to ROOM  
MONITOR.  
3. Press the SELECT button and all the registered handset numbers and  
handset names show on the display.  
4. Use the 6or 5button to select the desired handset. Press the SELECT  
button to confirm.  
If handset 1 is the room monitoring initiator, the following displays will be  
shown during the room monitor:  
ROOM MONITOR  
ROOM MONITOR  
HANDSET 1  
FROM  
HANDSET 2  
HANDSET 2  
HANDSET 1  
Originating Handset  
NOTE:  
Receiving Handset  
1) If handsets have been named, then the name will be  
displayed on the LCD instead of handset numbers.  
2) During the room monitoring, it will emit a beep tone if  
there are incoming calls. You may press the TALK/CALL  
BACK button or SPEAKER button to answer the call and quit  
the room monitor mode.  
ꢀ1  
3) While in room monitoring mode, the initiating handset  
can listen with the handset speakerphone by pressing  
the SPEAKER button once. Switch back to the earpiece by  
pressing TALK/CALL BACK button once. Press the *EXIT  
button to end room monitoring.  
Intercom Operation  
The intercom feature allows you to have a conversation with another  
registered handset without tying up the telephone line, allowing you to  
still receive incoming calls.  
IMPORTANT NOTE: The following procedures can ONLY be  
done with Model 28011 and 28041 handsets.  
Handset to Handset Intercom Call  
1. Make sure the originating phone is OFF (not in talk mode).  
ꢀ. Press the MENU button and use the 6or 5button to scroll to  
INTERCOM.  
3. Press the SELECT button to enter the menu.  
NOTE: You can press the INT button to shortcut to the menu.  
4. A list of registered handsets shows on the display. Use the 6or 5  
button to scroll to the desired handset you want to page.  
5. Press the SELECT button.  
6. The receiving handset is paged and emits a tone.  
7. To cancel the page, press the *EXIT, INT or TALK/CALL BACK button on  
the originating handset.  
8. Wait for the person at the receiving handset to press the INT button.  
NOTE: If the receiving handset does not answer within two  
minutes, the intercom call is automatically canceled and  
the originating handset displays NO ANSWER.  
9. When finished, press the *EXIT button or INT button on either handset  
to deactivate the intercom.  
Receiving an Intercom Call  
When you receive an intercom call, your handset beeps. To answer the  
call press the INT button on the handset.  
Advanced Intercom Features  
Receiving an Incoming Call During an Intercom Call  
If you receive a telephone call during an intercom call, the intercom call is  
immediately terminated and both handsets ring. Either handset user may  
press the TALK/CALL BACK or SPEAKER button to answer the call.  
ꢀꢀ  
Using Intercom with External Telephone Calls  
During a telephone call, you may use the intercom/paging function to  
page another handset and have an off line, private (two-way) intercom  
conversation. You may also have a three-way conversation between  
the external caller and the handsets, or you may transfer the external  
telephone call to another handset.  
NOTE: Before you intercom/page another handset, you  
must decide whether you want to create a two-way or a  
three-way conversation.  
Two-Way Calling  
1. During an external call, press the INT button to enter the intecom menu.  
ꢀ. A list of registered handsets shows on the display. Use the 6or 5  
button to scroll to the desired handset you want to page.  
3. Press the SELECT button to page. LINE ON HOLD shows on the display.  
4. The receiving handset is paged and emits a tone.  
5. Press the INT button on the receiving handset to answer the intercom  
call. Both intercom users may speak privately. The external caller will  
not hear the intercom conversation.  
6. When finished, press the *EXIT or INT button on either handset to end  
the intercom call.  
7. The originating handset returns to the talk mode, and you can resume  
your original telephone conversation.  
Three-way Conferencing  
One touch three-way conferencing (by another handset)  
1. When a handset is talking with an external call, press the TALK/CALL  
BACK or SPEAKER button on a second handset to join the call.  
- OR -  
Three-way conferencing by handset in use:  
1. During an external call, press the INT button to enter the intercom menu.  
ꢀ. List of registered handsets shows on the display. Use the 6or 5  
button to scroll to the desired handset you want to intercom with.  
3. Press the SELECT button to page. LINE ON HOLD shows on the display.  
4. The receiving handset is paged and emits a paging tone.  
5. Press the INT button on the receiving handset to answer the intercom  
call.  
6. During intercom, PRESS SELECT TO CONFERENCE shows in the  
originating handset's display.  
7. Press SELECT button on the originating handset to conference with the  
receiving handset and the external caller. CONFERENCE shows on both  
the display on the originating and receiving handsets.  
ꢀ3  
Call Transfer  
Transferring Calls to Other Handsets  
During an external call, you may transfer the external call from handset  
to handset.  
1. During an external call, press the INT button to enter the intercom  
menu.  
ꢀ. List of registered handsets shows on the display. Use the 6or 5  
button to scroll to the desired handset you want to intercom with.  
3. Press the SELECT button to page. LINE ON HOLD shows on the display.  
4. On the originating handset, press the TALK/CALL BACK or SPEAKER  
button to transfer the call  
NOTE: If the receiving handset does not answer within 30  
seconds the orginating handset rings back and displays  
CALLBACK. If the originating handset does not answer  
within the next 20 seconds, the call is automatically  
dropped.  
Caller ID (CID)  
IMPORTANT: In order to use this unit’s Caller ID features, you  
must subscribe to either the standard Name/Number Caller  
ID Service or Call Waiting Caller ID Service. To know who is  
calling while you are on the phone, you must subscribe to  
Call Waiting Caller ID Service.  
This unit receives and displays information transmitted by your local  
phone company. This information can include the phone number, date,  
and time; or the name, phone number, date, and time.  
Number of new calls received  
NEW  
FEB  
Time call received  
Caller’s phone number  
Caller’s name  
Date call  
received  
Call Waiting Caller ID  
Provided you subscribe to Call Waiting Caller ID service from your phone  
company; if you receive an incoming call and you are using the GE multi  
handset system, a beep indicates the presence of a Call Waiting call  
on the line. The Call Waiting Caller ID information will be displayed and  
stored in the history of all handsets in the system.  
ꢀ4  
• When you hear the call waiting beep in the handset receiver, press the  
FLASH/DELETE button to put the current call on hold and answer the  
incoming call. Press FLASH/DELETE again to return to the original call.  
CID Error Codes  
Various Caller ID error messages may appear on the display. Refer to the  
Display Messages section of this User ’s Guide for more information.  
Receiving CID Records  
When you receive a call, the Caller ID information is transmitted between  
the first and second ring. The Caller ID information appears on the display  
while the phone rings, giving you a chance to monitor the information  
and decide whether or not to answer the call.  
Storing CID Records (In CID Memory)  
If you are not at home or cannot answer, your telephone’s Caller ID  
memory stores the data for the 40 most recent calls you received so you  
can see who called while you were unavailable. When the 41st call is  
received, the oldest Caller ID record (1st call) is automatically deleted.  
You may review the stored information at any time. Calls received since  
your last review show as NEW CALL XX on the top line of the display.  
Reviewing CID Records  
As calls are received and stored, the display is updated to let you know  
how many calls have been received. To scroll CID records:  
1. Make sure the phone is OFF (not in talk mode).  
ꢀ. Press the 6 button to review the newest CID record.  
3. Press the 5 button to review the oldest CID record first.  
Dialing a CID Number  
1. Make sure the phone is OFF (not in TALK mode).  
ꢀ. Use the 6or 5button to display the desired record.  
3. Press the TALK/CALL BACK or SPEAKER button. The number dials  
automatically.  
Formatting a CID Number Before Dialing  
NOTE: Depending on;  
(a) how the incoming caller’s phone number is formatted  
when it is received, and  
(b) whether or not you previously pre-programmed your  
local area code into the PHONE SETTING menu, you may  
need to adjust the format of the incoming caller’s stored  
phone number before calling back the record.  
If the number does not dial as shown, follow below steps to format it:  
1. Make sure the phone is OFF (not in talk mode).  
ꢀ5  
STORE  
ꢀ. Use the 6or 5button to scroll to the  
desireD CID record.  
3. Press the MENU button to show the CALL  
OPTIONS menu.  
FORMAT  
DELETE  
DELETE ALL  
4. Use the 6or 5button to scroll to FORMAT.  
CALL OPTIONS  
5. Press the SELECT button to show all the  
available formats.  
6. Use the 6or 5button to scroll to the desired format.  
7. Press the TALK/CALL BACK or SPEAKER button. The formatted number  
dials automatically.  
Available formats include:  
Number of digits  
Explanation  
Example  
Eleven digits  
8888  
long distance code “1 ”  
1-317-888-  
+3-digit area code  
+7-digit telephone number.  
Ten digits  
3-digit area code +  
7-digit telephone number.  
317-888-8888  
888-8888  
Seven digits  
7-digit telephone number.  
Storing CID Records into Phone Book  
You may also store CID information in the Phone Book.  
NOTE: It is important that you format CID records correctly  
for dialing out BEFORE storing in the Phone Book as you  
cannot reformat CID records stored in memory.  
1. Make sure the phone is OFF (not in talk  
STORE  
mode).  
FORMAT  
DELETE  
ꢀ. Use the 6or 5 button to scroll to the  
desired CID record.  
DELETE ALL  
3. Press the MENU button to display CALL  
OPTIONS.  
CALL OPTIONS  
4. Use the 6or 5 button to scroll to STORE.  
5. Press the SELECT button to store and the display shows ENTER NAME.  
You may now change the name, if desired.  
6. Press the SELECT button to store the name and the display shows  
ENTER NUMBER. You may now change the number, if desired.  
7. Press the SELECT button to store numer and the display shows SET  
RINGER TONE.  
8. Follow steps 10-13 in "Adding Phone Book Entries" to save the record.  
ꢀ6  
NOTE: If the selected CID record contains any information  
that is non-numeric, the unit will not allow this record to  
transfer to the phone book.  
Deleting a CID Record  
1. Make sure the phone is OFF (not in TALK mode).  
ꢀ. Use the 6or 5button to scroll to the CID record you want to delete.  
3. Press the MENU button to display CALL OPTIONS.  
4. Use the 6or 5button to scroll to DELETE.  
5. Press the SELECT button to show DELETE CALL ID?.  
6. Press the SELECT button again to confirm the deletion. The display  
shows DELETED.  
NOTE: Press the *EXIT button to return to the standby mode  
or if no action is taken, it will exit automatically after one  
minute.  
Deleting All CID Records  
1. Make sure the phone is OFF (not in TALK mode).  
ꢀ. Use the 6or 5button to display any Caller ID record.  
3. Press the MENU button to display CALL OPTIONS.  
4. Use the 6or 5button to scroll to DELETE ALL?.  
5. Press the SELECT button to show DELETE ALL?.  
6. Press the SELECT button again to confirm the deletion. The display  
shows DELETED. The display shows DELETED followed by NO CALLS.  
NOTE: Press the *EXIT button to return to the standby mode  
or if no action is taken, it will exit automatically after one  
minute.  
Phone Book  
IMPORTANT NOTE: The following procedures can ONLY be  
done with Model 28011 and 28041 handsets.  
The cordless handset(s) have their own separate memory storage areas  
which are not accessible to each other. You may store up to fifty 15-  
character names (including spaces) and ꢀ0-digit telephone numbers in  
the handset memory.  
Adding Phone Book Entries  
You may assign a specific melody and a downloaded picture for the  
phone book entry. They will ONLY work if you have subscribed to the  
Caller ID service. Then when that person calls, the assigned melody will  
ring instead of the normal ring, and the downloaded picture will show on  
the display.  
You may choose from 10 different polyphonic melodies, 10 different ring  
tones and 5 recorded ring tones.  
ꢀ7  
ADD RECORD  
1. Make sure your phone is OFF (not in talk  
mode).  
ꢀ. Press the MENU button and use the 6or 5  
button to scroll to PHONE BOOK.  
3. Press the SELECT button to enter the phone  
book.  
PHONE BOOK  
NOTE: You may press the PHONEBOOK button to shortcut to  
the phone book, too.  
4. Use the 6or 5 button to scroll to ADD  
RECORD.  
5. Press the SELECT button to confirm. ENTER  
NAME shows on the display.  
6. Use the number keys to enter a name (up to  
ENTER NAME  
15 characters, including spaces). More than  
one letter is stored in each of the number  
keys. (The number 1 key can be used to  
enter "space", "_", "*", and "!")  
NOTE: If you make a mistake press the FLASH/DELETE  
button to backspace and erase the wrong character(s).  
7. Press the SELECT button to save the name.  
The display shows ENTER NUMBER.  
8. Use the number keys to enter the telephone  
1 2 3 4 5  
number (up to ꢀ0 digits, including pauses).  
ENTER NUMBER  
9. Press the SELECT button to save the number.  
The display shows SET RINGER TONE.  
REC RING TONE  
10. Use the 6or 5 button to scroll to your  
RING MELODY 1  
desired ringer tone. You will hear a sample of  
the ringer tone you select.  
11. Press the SELECT button to save your  
selection. The display shows PICTURE ID.  
RING MELODY 2  
RING MELODY 3  
RING MELODY 4  
SET RINGER TONE  
NOTE: When a picture is assigned to a phone book entry  
a “*” will appear beside the entry.  
1ꢀ. The display shows DEFAULT: NO PICTURE  
ID. Use the 6or 5 button to scroll to your  
desired picture.  
DEFAULT :  
NO PICTURE ID  
13. Press the SELECT button to save the record. You  
PICTURE ID  
will hear a confirmation tone and the display  
shows the whole record for ꢀ seconds and then  
shows the phone book records list again.  
14. To enter another name and number, return to step 4 and repeat the  
process.  
ꢀ8  
Storing the Last Number Dialed  
Store a dialed number when reviewing it:  
1. Make sure the phone is OFF (not in talk mode).  
ꢀ. Press the REDIAL button on the handset to access the DIALED menu.  
3. Use the 6or 5 button to scroll to desired record.  
4. Press SELECT button and the display shows STORE?.  
5. Press SELECT button again to confirm and the display shows ENTER  
NAME.  
6. Repeat Steps 6 through 13 in the section Adding Phone Book Entries,  
except instead of entering the number as indicated in Step 8, the dialed  
number shows on the display.  
NOTE: If the phone book has 50 entries, FULL shows on the  
display and you must delete a record before adding a new one.  
NOTE: If the dialed number is longer than 20 digits, it cannot  
be stored.  
Inserting a Pause in the Dialing Sequence  
(of a Stored Number)  
Press the #PAUSE button on the handset to insert a delay in dialing  
sequence of a stored number when a pause is needed to wait for a dial  
tone (for example, after you dial 9 for an outside line, or to wait for a  
computer access tone.) Each pause counts as one digit in the dialing  
sequence.  
You can press the #PAUSE button to insert a P (pause) when you enter the  
telephone number when adding a phone book entry.  
Reviewing Phone Book Records  
1. Make sure your phone is OFF (not in talk mode).  
ꢀ. Press the MENU button and use the 6or 5 button to scroll to PHONE  
BOOK.  
3. Press the SELECT button to enter the phone book.  
NOTE: You may press the PHONEBOOK button to shortcut to the phone  
book, too.  
4. Use the 6or 5 button to scroll the records  
- OR -  
Press the number keys to go to the name of the records started with  
the corresponding character.  
NOTE: Your phone book records are sorted automatically in  
alphabetical order.  
5. Press the SELECT button to view the details of the record.  
6. Use the 6or 5 button to view the picture ID set, if any.  
ꢀ9  
Editing a Phone Book Record  
1. When reviewing the phone book records list, use the the 6or 5  
button or the number keys to scroll to the desired record.  
ꢀ. Press the SELECT button to view the details of the record.  
3. Press the SELECT button again to show the option menu. The display  
shows EDIT and DELETE.  
4. Use the the 6or 5 button to scroll to EDIT.  
5. Press the SELECT button again and the display shows ENTER NAME  
with the name of the record.  
6. The steps to edit are the same as steps 6 through 13 in the section  
Adding Phone Book Entries.  
Deleting a Phone Book Record  
1. When reviewing the phone book records list, use the the 6or 5  
button or the number keys to scroll to the desired record.  
ꢀ. Press the SELECT button to view the details of the record.  
3. Press the SELECT button again to show the option menu. The display  
shows EDIT and DELETE.  
4. Use the 6or 5 button to scroll to DELETE.  
5. Press the SELECT button and the display shows the details of the record  
again with DELETE?.  
6. Press the SELECT button to delete the record. The display will show  
DELETED.  
NOTE: If you don’t want to change or delete the record  
when the display shows DELETE?, simply press the *EXIT  
button, or wait for one minute to exit the review mode  
automatically.  
Dialing a Phone Book Record  
Dial a phone book record while in talk mode:  
1. Make sure the phone is ON (in talk mode) by pressing the TALK/CALL  
BACK or SPEAKER button.  
ꢀ. Press the PHONEBOOK button to access the phone book.  
3. Use the 6or 5 button or the number keys to scroll to the desired  
record.  
4. Press the SELECT button to dial the number.  
- OR -  
Dial a phone book record while reviewing it:  
1. Make sure the phone is OFF (not in talk mode).  
ꢀ. Press the PHONEBOOK button to access the phone book.  
30  
3. Use the 6or 5 button or the number keys to scroll to the desired  
record.  
4. Press the TALK/CALL BACK or SPEAKER button. The number dials  
automatically.  
Chain Dialing from Phone Book  
Use this feature to make calls which require a sequence of numbers,  
such as a calling card number used for a frequently called long distance  
number.  
You can store each part of the dialing sequence (such as Long Distance  
Access Number, Authorization Code, and a frequently called long distance  
number) in the phone book and simply repeat step ꢀ through 4 in “Dial a  
phone book record while in talk mode” to dial them one by one.  
Picture Download  
Download Your Own Image  
Do you have any favorite images stored in your personal computer that  
you would like to use as your ꢀ8041 handset wallpaper or to assign to one  
of your 50 available phone book directories? Using the provided Image  
Editor Software, you can view and convert your images. Once you have  
selected your file and viewed your image in the software, use the included  
USB cable to send the converted image directly into your handset.  
You can download a total of 15 images in additional to the preset 10  
wallpapers.  
One-Time Software Installation  
1. Insert the enclosed GE 28041 Image Manager CD into your personal  
computer.  
ꢀ. Follow the instructions of the program to complete the automatic  
installation.  
3. When the installation process is completed, you will find an GE ꢀ8041  
Image Manager CD icon on your PC desktop. Click on this icon to run  
the GE ꢀ8041 Image Manager Software.  
Image Editing  
Once you have installed the software, follow these steps to view and  
convert your selected images.  
1. Click on the OPEN icon.  
ꢀ. Browse to the folder which contains your desired image, and open the  
file.  
3. You will see your image displayed in the middle of the screen and a  
Selection Windows on it. The selected area enclosed by the Selection  
Windows is inside the telephone display on the right.  
31  
4. You can select the following options to edit your image: Zoom In and  
Zoom Out, Adjust Brightness and Contrast, Rotate Left and Rotate  
Right, Adjust Color, Auto Resize the Image to fit the Selection Windows  
Image Downloading  
Before downloading your image, make sure that the provided USB cable  
is correctly installed into your computer (using the larger end of the  
connector) and your handset (using the smaller end of the connector).  
After you have completed the image editing process,  
1. Press the SEND TO PHONE icon to make sure that the software can  
communicate with the handset.  
ꢀ. A window pops up that states, 'Connection has been made to the  
Handset. Press OK to continue download'.  
3. Handset displays DOWNLOADING during download and then USB  
CONNECTED appears in the display. After completed download,  
another pop up window states, 'Download finished successfully.' Press  
OK to close window.  
Choosing the Downloaded Image as Wallpaper  
Refer to Section; "Telephone Setup/Display Setting/ Wallpaper".  
Assigning the Downloaded Image to Phone Book  
Record  
Refer to Section; "Phone Book/Adding Phone Book Entries and Phone  
Book/Editing a Phone Book Record".  
NOTE: If the download fails, DOWNLOAD FAILED shows in  
the display.  
NOTE: Do not leave the USB cable connected to the  
handset for an extended period of time as it will drain  
the battery cells.  
NOTE: The preset images in the WALLPAPER sub-menu of  
the DISPLAY SETTING menu cannot be deleted. However,  
any downloaded images can be deleted and replaced by  
new ones.  
Recording Ringer Tones  
Record Your Own Ringer Tones  
Do you have any favorite songs stored in your personal computer, CD,  
tapes or elsewhere that you would like to use as your ꢀ8041 handset  
ringer tone or to assign to one of your 50 available phone book  
directories? Or perhaps you would like to record your own voice or other  
sounds, such as bird song or dog bark, to use? You can record up to 5  
unique ringer tones for a maximum of 1ꢀ seconds each.  
3ꢀ  
Cued-up music typically produces the best sounding recorded ringer. It is  
recommended to begin recording your ringer at the beginning of a song,  
rather than a portion from the middle to produce an audibly pleasing  
custom ringer.  
1. Make sure your phone is OFF (not in talk  
RINGER VOLUME  
mode).  
RINGER TONE  
KEY TONE  
ꢀ. Press the MENU button and use the 6or 5  
button to scroll to SOUND SETTING.  
3. Press the SELECT button to enter the menu.  
SOUND SETTING  
4. Use the 6or 5 button to scroll to RINGER  
TONE.  
REC RING TONE  
TONE 1  
TONE 2  
5. Press the SELECT button to show the options.  
6. Use the 6or 5 button to scroll to REC  
RING TONE.  
TONE 3  
TONE 4  
7. Press the SELECT button to show the 3 ways  
SET RINGER TONE  
to record your unique ringer tones  
8. You may record your ringer tones via the included audio cable, via an  
optional headset or via the handset microphone.  
9. Use the 6 or 5 button to scroll to the correct setting.  
10. Press the SELECT button to enter the count-down display.  
NOTE: If the memory is full, the handset will prompt FULL  
when the SELECT button is pressed in step 7.  
Record with Included Audio Cable or an Optional  
Headset  
Audio Cable: Before recording the ringer tone, make sure that the  
provided audio cable is correctly installed into your computer or CD  
player or TAPE player by inserting the 3.5mm plug (the larger end of the  
connector) into the headphone jack of your PC or audio source, and insert  
the ꢀ.5mm plug (the smaller end of the connector) into the headset jack  
on the side of your ꢀ8041 handset or Optional Model ꢀ8011 handset.  
Optional Headset: Before recording the ringer tone, make sure that the  
optional headset is connected to the headset jack on the side of your  
ꢀ8041 handset or Optional Model ꢀ8011 handset.  
From the REC RINGER TONE menu;  
1. Use the 6or 5 button to scroll to the  
AUDIO_CABLE  
AUDIO_CABLE or HEADSET.  
ꢀ. Press the SELECT button to enter.  
HEADSET  
MICROPHONE  
REC RINGER TONE  
33  
3. Verify the cable/headset is connected to  
your handset, then press the SELECT button  
again to start the count-down display. The  
handset will start recording and the second  
number will decrease automatically.  
PRESS SELECT TO  
START  
12 SECONDS  
AUDIO CABLE  
4. The recording will stop when the display  
counts down to 0 seconds. Or you may press  
the SELECT button any time to stop.  
REPLAY  
RE-RECORD  
When the recording stops, the display will  
show ꢀ options: REPLAY and RE-RECORD.  
AUDIO CABLE  
NOTE: After recording, you may also  
press the *EXIT button to return to the  
Sound Setting menu.  
To replay the recorded ringer tone:  
1. Use the 6or 5 button to scroll to REPLAY.  
ꢀ. Press the SELECT button to play the recorded ringer tone.  
3. When finished, the display shows both options again.  
To re-record the ringer tone:  
1. Use the 6or 5 button to scroll to RE-RECORD.  
ꢀ. Press the SELECT button to confirm, and the display will show the  
count-down display again.  
3. Follow the recording steps to record the ringer tone.  
Record with the Handset Microphone  
From the REC RINGER TONE menu;  
AUDIO_CABLE  
1. Use the 6or 5 button to scroll to the  
MICROPHONE.  
HEADSET  
MICROPHONE  
ꢀ. Press the SELECT button to enter the count-  
down display.  
3. Press the SELECT button to start, then the  
REC RINGER TONE  
handset will start recording and the second  
number will decrease automatically.  
4. The recording will stop when the display  
counts down to 0 seconds.  
PRESS SELECT TO  
START  
12 SECONDS  
Or you may press the SELECT button any  
time to stop.  
MICROPHONE  
REPLAY  
When the recording stops, the display will  
RE-RECORD  
show ꢀ options: REPLAY and RE-RECORD.  
Follow the steps under section "Record  
with Included Audio Cable or an Optional  
Headset" to replay the recorded ringer tone  
or re-record the ringer tone.  
MICROPHONE  
34  
IMPORTANT NOTE: When you want to use the handset  
microphone to record ringer tones, DO NOT insert the Audio  
cable or the optional headset into the headset jack of the  
handset.  
Choosing the Recorded Sound Clip as Ringer  
Tone  
Refer to Section; "Telephone Setup/Sound Setting/Ringer Tone".  
Assigning the Recorded Sound Clip to Phone  
Book Record  
Refer to Section; "Phone Book/Adding Phone Book Entries and Phone  
Book/Editing a Phone Book Record".  
Belt Clip and Optional Headset  
Connecting the Belt Clip  
1. To attach the belt clip, insert the sides of the belt clip into the slots on  
each side of the handset.  
ꢀ. Snap the ends of the belt clip into place.  
Connecting an Optional Headset to the Handset  
Each handset can be used with an optional headset for hands free  
operation.  
1. Connect the headset to the headset jack on the side of the handset.  
The handset receiver and microphone are disabled when the  
headset is connected.  
ꢀ. Adjust the headset to rest comfortably on top of your head and over  
your ear. Move the microphone to approximately two to three inches  
from your mouth.  
3. Press the TALK/CALL BACK button to answer a call or make calls using the  
headset.  
4. To return to normal operation, unplug the headset from the jack.  
Changing the Battery  
CAUTION: To reduce the risk of fire or personal injury,  
use only the Thomson Inc. approved model 5-2660  
Nickel-metal Hydride battery (Ni-MH), which is  
compatible with this unit.  
1. Make sure the telephone is OFF (not in TALK mode) before you replace  
the battery.  
ꢀ. Remove the battery compartment door.  
3. Disconnect the cord attached to the battery pack and remove the  
battery pack from the handset.  
35  
4. Insert the new battery pack and connect the cord to the jack inside the  
battery compartment.  
5. Put the battery compartment door back on.  
6. Place handset in the base or handset charge cradle to charge. Allow  
the handset battery to properly charge (for 16 hours) prior to first  
use or when you install a new battery pack. If you do not properly  
charge the phone, battery performance will be compromised.  
Battery Safety Precautions  
• Do not burn, disassemble, mutilate, or puncture. Like other batteries of  
this type, toxic materials could be released which can cause injury.  
• To reduce the risk of fire or personal injury, use only the Nickel-metal  
Hydride battery listed in the User’s Guide.  
• Keep batteries out of the reach of children.  
• Remove batteries if storing over 30 days.  
NOTE: The RBRC seal on the battery used in your Thomson Inc. product  
indicates that we are participating in a program to collect and recycle the  
rechargeable battery (or batteries).  
or call 1-800-8-BATTERY or contact a local recycling center.  
Display Messages  
The following indicators show the status of a message or of the unit.  
ANSWERER REMOTE  
Indicates the answering system is being  
accessed remotely.  
ACCESS  
BLOCKED NUMBER  
The person is calling from a number that has  
been blocked from transmission.  
CHARGING...  
Indicates the handset need to charge for a  
period of time before it can resume normal  
function.  
DELETE ALL?  
DELETE CALL ID?  
DELETE?  
Prompt asking if you want to erase all Caller ID  
records.  
Prompt asking if you want to erase the Caller ID  
record that is shown on the display.  
Prompt asking if you want to erase one of the 50  
records stored in the phone’s memory.  
END OF LIST  
Indicates that there is no additional information  
in Caller ID memory.  
36  
ENTER NAME  
Prompt telling you to enter the name in one of  
the 50 memory locations.  
ENTER NUMBER  
HANDSET NAME  
Prompt telling you to enter a telephone number  
in one of the 50 memory locations.  
Prompt telling you to enter the user name for the  
registered handset.  
HANDSET NEEDS  
REGISTRATION  
Indicates you must register a non-registered  
handset prior to use.  
INCOMPLETE DATA  
Caller information is interrupted during  
transmission or the phone line is  
excessively noisy.  
LINE IN USE  
LONG DISTANCE  
LOW BATTERY  
NEW  
Displays on handset while the line is in use.  
Indicates CID record is from a long distance call.  
Indicates the battery needs to be charged.  
Indicates call or calls have not been reviewed.  
NEW CALL XX  
XX represents the number of new CID records  
not reviewed.  
NO CALLS  
Indicates there are no CID records in memory.  
No Caller ID information was received.  
NO DATA  
OUT OF RANGE  
May indicate handset is too far away from the  
base or that  
the power has been interrupted. Move closer  
and check connections.  
PAGING or  
Someone pressed the PAGE button on the base  
or INT  
PAGING FROM  
button on the handset  
PLEASE REGISTER  
Indicates the handset needs to be registered  
before use.  
REPEAT  
Repeat call message. Indicates that a new call  
from the same number was received more than  
once.  
SEARCHING  
Indicates handset is searching for the base.  
SPEAKER  
Indicates the handset is in speakerphone mode.  
UNKNOWN CALLER/  
The incoming call is from an area not serviced by  
Caller ID or  
NAME/NUMBER  
the information was not sent.  
37  
Handset Sound Signals  
Signal  
A long warbling tone (with ringer on)  
Three short beeps  
Meaning  
Signals an incoming call  
Page signal  
One long beep  
Confirmation tone for the  
completion of a function  
One short beep  
(during room monitoring mode)  
Ring alert tone  
One short beep (every 7 seconds)  
Low battery warning  
Troubleshooting Guide  
Telephone Solutions  
No dial tone  
• Check and repeat installation steps:  
Ensure the base power cord is connected to a working electrical  
outlet .  
Ensure the telephone line cord is connected to the base and the wall  
jack.  
• Connect another phone to the same jack; if there is still no dial tone,  
the problem might be your wiring or local service.  
• The handset may be out of range of the base. Move closer to the  
base.  
• Ensure the battery is properly charged (16 hours).  
• Ensure the battery pack is installed correctly.  
• The handset should beep when you press the TALK/CALL BACK  
button and the charge indicator on the base should be lit when  
the handset rests in the cradle. If not, the battery may need to be  
charged.  
• Place handset in charge cradle for at least ꢀ0 seconds to reset the  
unit.  
Handset does not ring  
• Make sure the handset ringer switch is turned ON, this can be done  
through the handset setup menu - Ringer Volume.  
• The handset may be out of range. Move closer to the base.  
• You may have enabled Do Not Disturb (DND). Make sure the DND is  
off.  
• You may have too many extension phones on your line. Try  
unplugging some phones.  
• Check for dial tone.  
38  
You experience static, noise, or fading in and out  
• The handset may be out of range of the base. Move closer to the  
base.  
• Make sure base is not plugged into an outlet with another household  
appliance. If necessary, relocate the base.  
• Charge the battery.  
Unit beeps  
• Clean charging contacts on cordless handset.  
• See solutions for “No dial tone”.  
• Replace the battery.  
Memory Dialing doesn’t work  
• Did you program the memory location keys correctly?  
• Did you follow proper dialing sequence?  
Unit locks up and there is no communication between the base and  
cordless handset  
• Unplug the AC power adaptor from the wall outlet and the back of  
the base. Remove the handset battery. Wait for 30 seconds and plug  
the power adaptor back into the base and wall outlet. Reconnect the  
battery and charge for 16 hours.  
Handset displays "SEARCHING" or "OUT OF RANGE" and cannot link up  
with the base when the TALK/CALL BACK button is pressed.  
• Handset may be out of range of the base. Move closer to the base.  
• Make sure the power adaptor is properly installed.  
• Disconnect the handset battery and plug it in again. Place the  
handset on the cradle for at least ꢀ to 3 minutes.  
• Disconnect the power adaptor and plug it in again. Then place the  
handset on the cradle for at least ꢀ to 3 minutes.  
Handset displays "HANDSET NEEDS REGISTRATION"  
• Follow the programming in the telephone procedures to re-register  
the handset to the base.  
• Press the SELECT button to begin handset registration. Follow  
instructions on handset screen.  
Caller ID Solutions  
No Display  
• Charge the battery (for 16 hours). Or replace the battery.  
• Make sure that the unit is connected to a non-switched electrical  
outlet. Disconnect the AC power adaptor from the base and  
reconnect it.  
39  
Caller ID Error Message  
• The unit displays this message if it detects anything other than valid  
Caller ID information during the silent period after the first ring. This  
message indicates the presence of noise on the line.  
No Caller ID  
• In order to receive Caller ID information, you must subscribe to the  
standard name/number Caller ID service from your local telephone  
company.  
Battery Solutions  
If you experience any of the following problems, even after fully  
recharging the battery, you may need to replace the battery pack:  
• Short talk time  
• Poor sound quality  
• CHARGE/IN USE indicator on the base fails to illuminate.  
• Limited range  
Causes of Poor Reception  
• Aluminum siding.  
• Foil backing on insulation.  
• Heating ducts and other metal construction that can shield radio  
signals.  
• You’re too close to appliances such as microwaves, stoves,  
computers, etc.  
• Atmospheric conditions, such as strong storms.  
• Base is installed in the basement or lower floor of the house.  
• Base is plugged into AC outlet with other electronic devices.  
• Baby monitor is using the same frequency.  
• Handset battery is low.  
General Product Care  
To keep your unit working and looking good, follow these guidelines:  
• Avoid dropping the handset, as well as other rough treatment to the  
phone.  
• Clean the phone with a soft cloth.  
• Never use a strong cleaning agent or abrasive powder because this  
will damage the finish.  
• Retain the original packaging in case you need to ship the phone at  
a later date.  
• Periodically clean the charge contacts on the handset and remote  
charger with a clean pencil eraser.  
40  
Service  
If trouble is experienced with this equipment, for repair or warranty information,  
please contact customer service at 1-800-448-0329. If the equipment is causing  
harm to the telephone network, the telephone company may request that you  
disconnect the equipment until the problem is resolved.  
This product may be serviced only by the manufacturer or its authorized service  
agents. Changes or modifications not expressly approved by Thomson Inc. could  
void the user’s authority to operate this product. For instructions on how to obtain  
service, refer to the warranty included in this guide or call customer service at  
1-800-448-0329.  
Or refer inquiries to:  
Thomson Inc.  
Manager, Consumer Relations  
PO Box 1976  
Indianapolis, IN 46206-1976  
Attach your sales receipt to the booklet for future reference or jot down the date  
this product was purchased or received as a gift. This information will be valuable if  
service should be required during the warranty period.  
Purchase date ________________________________________________________  
Name of store ________________________________________________  
_
Accessory Information  
DESCRIPTION  
Handset Charge Cradle  
Belt Clip  
MODEL NO.  
5-2702  
5-2703  
Headset  
Replacement Handset Battery  
5-2425 (black)  
5-2660  
To place order, have your Visa, MasterCard, or Discover Card ready and  
call toll-free 1-800-338-0376. A shipping and handling fee will be charged  
upon ordering. We are required by law to collect appropriate sales tax for  
each individual state, country, and locality to which the merchandise is  
being sent. Items are subject to availability.  
41  
Limited Warranty  
What your warranty covers:  
• Defects in materials or workmanship.  
For how long after your purchase:  
• One year, from date of purchase.  
(The warranty period for rental units begins with the first rental or 45 days  
from date of shipment to the rental firm, whichever comes first.)  
What we will do:  
• Provide you with a new or, at our option, a refurbished unit. The exchange unit  
is under warranty for the remainder of the original product’s warranty period.  
How you get service:  
• Properly pack your unit. Include any cables, etc., which were originally  
provided with the product. We recommend using the original carton and  
packing materials.  
• ”Proof of purchase in the form of a bill of sale or receipted invoice which is  
evidence that the product is within the warranty period, must be presented to  
obtain warranty service.” For rental firms, proof of first rental is also required.  
Also print your name and address and a description of the defect. Send via  
standard UPS or its equivalent to:  
Thomson Inc.  
11721 B Alameda Ave.  
Socorro, Texas 79927  
• Pay any charges billed to you by the Exchange Center for service not covered  
by the warranty.  
• Insure your shipment for loss or damage. Thomson Inc. accepts no liability in  
case of damage or loss.  
• A new or refurbished unit will be shipped to you freight prepaid.  
What your warranty does not cover:  
• Customer instruction. (Your User’s Guide provides information regarding  
operating instructions and user controls. Any additional information, should be  
obtained from your dealer.)  
• Installation and setup service adjustments.  
• Batteries.  
• Damage from misuse or neglect.  
• Products which have been modified or incorporated into other products.  
• Products purchased or serviced outside the USA.  
• Acts of nature, such as but not limited to lightning damage.  
Product Registration:  
• Please complete and mail the Product Registration Card packed with your unit.  
It will make it easier to contact you should it ever be necessary. The return of  
the card is not required for warranty coverage.  
4ꢀ  
Limitation of Warranty:  
• The warranty stated above is the only warranty applicable to this product.  
All other warranties, express or implied (including all implied warranties of  
merchantability or fitness for a particular purpose) are hereby disclaimed. No  
verbal or written information given by Thomson Inc., its agents,  
or employees shall create a guaranty or in any way increase the scope of this  
warranty.  
• Repair or replacement as provided under this warranty is the exclusive  
remedy of the consumer. Thomson Inc. shall not be liable for incidental or  
consequential damages resulting from the use of this product or arising  
out of any breach of any express or implied warranty on this product. This  
disclaimer of warranties and limited warranty are governed by the laws of the  
state of Indiana. Except to the extent prohibited by applicable law, any implied  
warranty of merchantability or fitness for a particular purpose on this product  
is limited to the applicable warranty period set forth above.  
How state law relates to this warranty:  
• Some states do not allow the exclusion nor limitation of incidental or  
consequential damages, or limitations on how long an implied warranty lasts  
so the above limitations or exclusions may not apply to you.  
• This warranty gives you specific legal rights, and you also may have other  
rights that vary from state to state.  
If you purchased your product outside the USA:  
• This warranty does not apply. Contact your dealer for warranty information.  
43  
Index  
A
Deleting a Phone Book Record 30  
Accessory Information  
Adding Phone Book Entries  
Advanced Intercom Features  
Answering a Call  
Answering System  
Remote Access  
41  
ꢀ7  
ꢀꢀ  
18  
Deleting All CID Records  
Deregistration  
Dialing a CID Number  
Dialing a Phone Book Record  
Digital Security System  
Display Messages  
Display Setting  
Do Not Disturb (DND)  
Download Your Own Image  
ꢀ7  
1ꢀ  
ꢀ5  
30  
7
36  
14  
ꢀ1  
31  
16  
11  
Area Code  
Assigning the Downloaded Image  
to Phone Book Record  
3ꢀ  
Assigning the Recorded Sound Clip  
to Phone Book Record  
35  
18  
E
Auto Standby  
Editing a Phone Book Record  
30  
Equipment Approval Information ꢀ  
B
Exit  
19  
9
Battery Safety Precautions  
Battery Solutions  
Before You Begin  
36  
40  
6
Extra Charging Cradle  
F
Belt Clip and Optional Headset 35  
FCC RF Radiation Exposure  
Statement  
3
C
Flash/Call Waiting  
19  
Call Timer  
18  
ꢀ4  
ꢀ4  
ꢀ4  
39  
40  
Formatting a CID Number Before  
Dialing ꢀ5  
Call Transfer  
Call Waiting Caller ID  
Caller ID (CID)  
Caller ID Solutions  
Causes of Poor Reception  
G
General Product Care  
Global De-Registration  
40  
13  
Chain Dialing from Phone Book 31  
H
Changing the Battery  
35  
Handset Layout  
Handset Name  
Handset Sound Signals  
Handset to Handset  
Intercom Call  
Handset to Handset Paging  
Hearing Aid Compatibility (HAC)  
8
1ꢀ  
38  
CHARGE/IN USE indicator on the  
base  
18  
Choosing the Downloaded Image  
as Wallpaper  
3ꢀ  
ꢀꢀ  
ꢀ0  
3
Choosing the Recorded Sound Clip  
as Ringer Tone  
CID Error Codes  
Color Scheme  
35  
ꢀ5  
14  
I
Image Downloading  
Image Editing  
3ꢀ  
31  
Connecting an Optional Headset to  
the Handset  
35  
35  
Connecting the Belt Clip  
Important Installation Guidelines 7  
Inserting a Pause in the Dialing  
Sequence(of a Stored  
D
Default Setting  
Deleting a CID Record  
13  
ꢀ7  
Number)  
ꢀ9  
44  
Index  
Remote Access from Cordless  
Handset  
Remote Access Security Code 16  
Reviewing CID Records ꢀ5  
Reviewing Phone Book Records ꢀ9  
Rings to Answer  
Ringer Tone  
Ringer Volume  
Ringer Volume (Shortcut)  
Room Monitor  
Installation  
7
9
9
ꢀꢀ  
3
6
16  
Installing the Handset Battery  
Installing the Phone  
Intercom Operation  
Interference Information  
Introduction  
17  
15  
15  
ꢀ0  
ꢀ1  
K
Key Tone  
16  
L
Language  
11  
19  
3
S
Last Number Redial  
Licensing  
Limited Warranty  
Screening Calls from  
the Handset  
17  
41  
15  
15  
18  
ꢀ5  
4ꢀ  
Service  
Set Contrast  
Sound Setting  
Standby Screen  
Storing CID Records  
M
Making a Call  
Mute  
18  
ꢀ0  
O
Storing CID Records into Phone  
Book  
One-Time Software Installation 31  
ꢀ6  
Storing the Last Number Dialed ꢀ9  
P
Page  
19  
T
Paging from the Base/  
Group Page  
Parts Checklist  
Phone Book  
Phone Setting  
Picture Download  
Programming the Telephone  
Table of Contents  
4, 5  
6
18  
38  
ꢀ3  
19  
6
ꢀ7  
11  
31  
10  
Telephone Jack Requirements  
Telephone Operation  
Telephone Solutions  
Three-way Conferencing  
Transferring Calls to Other  
Handsets  
Troubleshooting Guide  
Two-Way Calling  
ꢀ3  
38  
ꢀ3  
R
Receiving an Incoming Call During  
an Intercom Call  
Receiving an Intercom Call  
Receiving CID Records  
ꢀꢀ  
ꢀꢀ  
ꢀ5  
U
Using Intercom with External  
Telephone Calls  
ꢀ3  
Record w/Handset Microphone 34  
Record with Included Audio Cable  
or an Optional Headset 33  
Record Your Own Ringer Tones 3ꢀ  
Recording Ringer Tones  
Registration  
V
Visual Ring Indicator on the  
Handset  
Volume  
18  
18  
3ꢀ  
10  
W
Wallpaper  
14  
45  
Thomson Inc.  
10330 North Meridian St.  
Indianapolis, IN 46ꢀ90-10ꢀ4  
© ꢀ006 Thomson Inc.  
Trademark(s) ® Registered  
Marca(s) Registrada(s)  
Model ꢀ8011  
00008008 (Rev. 1 Dom E/S)  
06-ꢀ7  
Printed in China  

Hotpoint HW170GK User Manual
Gigabyte 8S648FXP RZ User Manual
Franke Consumer Products Convection Oven FLAT 604 User Manual
Fagor America Electric Multi Cooker User Manual
Envision Peripherals Envision H1781 User Manual
Electrolux EHE 688 B User Manual
Daewoo DF 8150P User Manual
Curtis TV2010 User Manual
Cisco Systems CP7945GRF User Manual
Bayou Classic 2212 User Manual