Fisher Paykel CG903 User Manual

User guide  
Gas cooktops  
CG603 and CG903 models  
NZ AU  
1
Contents  
Introduction  
2
3
Safety and warnings  
Using your cooktop  
Care and cleaning  
Troubleshooting  
Warranty and service  
Gas rate summary  
4
8
10  
11  
12  
Important!  
SAVE THESE INSTRUCTIONS  
2
Introduction  
About your new cooktop  
Thank you for buying a Fisher & Paykel gas cooktop. Now that it is installed and ready to use, you  
will want to know everything about it to make sure you get excellent results right from the start.  
This guide introduces you to all its special features. We recommend you read the whole guide  
before using your new cooktop, for both safety and cooking success.  
Before using your new cooktop  
Before using your new cooktop, please:  
Read this user guide, taking special note of the ‘Safety and warnings’ section following.  
Plug the cooktop into the electricity supply and turn it on so the electronic ignition will work.  
1
1
3
4
6
Fig.1 CG603 with rapid burner  
5
1
1
1
1
4
4
2
2
3
3
Fig.2 CG603 with wok burner  
Fig.3 CG903  
1
Semi-rapid burner  
Wok burner  
Auxiliary burner  
Cooktop controls  
Fish burner  
2
3
4
5
6
Rapid burner  
3
Safety and warnings  
WARNING!  
Hot Surface Hazard  
This appliance becomes hot during use.  
Do not touch the cooktop components, burners, trivets/pan supports or the  
stainless steel base when hot.  
Before cleaning, turn the burners off and make sure the whole cooktop is cool.  
Failure to do so could result in burns and scalds.  
WARNING!  
Explosion Hazard  
Do not store flammable materials such as gasoline near the cooktop.  
Do not spray aerosols near the cooktop during use.  
Failure to do so may result in death or electrical shock.  
Important safety precautions  
Household appliances are not intended to be played with by children.  
Children, or persons with a disability which limits their ability to use the appliance, should have a  
responsible person to instruct them in its use. The instructor should be satisfied that they can use  
the appliance without danger to themselves or their surroundings.  
This appliance should be connected to a circuit that incorporates an isolating switch providing  
full disconnection from the electricity supply.  
Do not stand or place heavy objects on this appliance.  
Do not use an asbestos mat or decorative covers between the flame and the saucepan as this may  
cause serious damage to your cooktop.  
Do not place aluminium foil or plastic dishes on the cooktop burners.  
Do not let large saucepans or frying pans overlap the bench as this can deflect heat onto your  
benchtop and damage the surface.  
Do not let large saucepans, frying pans or woks push any other pans aside. This could make them  
unstable or deflect heat onto your benchtop and damage the surface.  
Do not use a steam cleaner for cleaning this cooktop.  
Saucepan handles may be hot to touch. Ensure saucepan handles do not overhang other gas  
burners that are on. Keep handles out of reach of children.  
If the electrical supply cord is damaged, it must only be replaced by an authorised person. Ensure  
that the electrical connection plug is accessible after installation.  
Where this gas cooktop is installed in marine craft or in a caravan, it shall not be used as a space  
heater.  
The use of a gas cooking appliance results in the production of heat and moisture in the room in  
which it is installed. Ensure the kitchen is well ventilated. Keep natural ventilation holes open or  
install a mechanical ventilation device (mechanical extractor hood).  
Prolonged intensive use of the appliance may call for additional ventilation, for example opening of  
a window, or more effective ventilation, for example increasing the level of mechanical ventilation  
where present.  
4
Using your cooktop  
Lighting the cooktop  
Off  
1
2
Choose the control knob for the burner you want to use.  
Press the knob down gently and turn it anticlockwise to  
the High position. The electrodes on all the burners will  
spark.  
High  
Flame failure models only: Hold down the knob for  
approximately five seconds after the burner has lit.  
Releasing the knob too soon will extinguish the flame.  
Adjust the flame anywhere between the High and Low  
positions. Do not adjust the flame between High and  
Low  
Fig.4 Non-jet cooktop controls  
(knobs may vary from those illustrated)  
3
Off  
Off  
O
.
Note:  
If the burner does not light within 15 seconds, turn the  
control knob off and wait at least one minute before  
trying again.  
High  
If the cooktop does not light  
Low  
Fig.5 Jet cooktop controls  
(knobs may vary from those illustrated)  
If the cooktop does not light, check that:  
The cooktop is plugged in and the electricity is switched on.  
The gas is turned on.  
The electrodes are sparking.  
If the electrodes are not sparking, they may be dirty or wet. Clean them with a toothbrush and  
methylated spirits, as shown in Fig. 6.  
Flame failure probe  
(some models only)  
Electrode  
Fig.6 How to clean an electrode  
5
Using your cooktop  
If the flame is irregular  
If the flame is yellow or irregular, check that the burner parts, including the burner cap, are:  
Clean and dry.  
Positioned correctly as shown in Fig. 8.  
See also ‘Troubleshooting.  
Burner cap  
Burner ring  
Electrode  
Fig.7 Burner parts  
Fig.8 Correct assembly  
of burner parts  
Fig.9 Incorrect assembly  
of burner parts, showing  
irregular flames  
Electricity failure  
If there is an electricity failure, you can still use your cooktop. Light the burners by holding a  
match close to the side of the burner and turning the control knob to the High position. Wait  
until the flame is burning evenly before adjusting.  
Flame failure safety feature (some models only)  
Some cooktop models have a flame failure probe (see Fig. 6).  
This safety feature cuts off the gas supply to the burner if the flame is blown out.  
When lighting the burner on flame failure models, hold down the knob for approximately five  
seconds after the burner has lit. Releasing the knob too soon will extinguish the flame.  
If the flames are accidentally extinguished, turn off the burner and do not try to light it again for  
at least one minute (to allow the gas to disperse).  
6
Using your cooktop  
General guidelines  
To get the best out of your cooktop, follow these simple suggestions:  
Use saucepans with thick flat bottoms. Food in a saucepan with an uneven bottom will take  
longer to cook.  
Fig.10 Efficient and inefficient saucepan bottoms  
Do not let large saucepans or frying pans overlap the bench as this can deflect heat onto your  
benchtop and damage the surface.  
Always make sure saucepans are stable. Using very heavy saucepans may bend the trivet/pan  
support or deflect the flame.  
When you need to boil, simmer or fry food, first set the temperature to the High position.  
Once the food is boiling, reduce the temperature to maintain a steady heat to cook your food  
thoroughly. Doing this will reduce the cooking time.  
For auxillary and semi-rapid burners, pans should be 12 cm (5 in.) or larger in diameter.  
For rapid burners, pans should be 18-26 cm (7-10 in.) in diameter.  
The fish burner is designed to be used with a ‘fish kettle’ or griddle approximately  
40 cm (16 in.) long.  
A fish kettle used on the fish burner is also useful for steaming long vegetables like corn cobs,  
Chinese broccoli, long beans, and asparagus.  
Using a wok  
Use your wok only on the wok burner. The trivet/pan support is shaped to take a traditional wok  
with a round base.  
You can also use a wok stand. Make sure the stand fits securely on the four fingers of the trivet/  
pan support, and is stable.  
Do not use a wok larger than 45 cm (18 in.)  
The wok burner is designed to be used with a wok but may be used with pans 18-26 cm  
(7-10 in.) in diameter, with care.  
7
Using your cooktop  
Using a SimmerMat (if supplied)  
A SimmerMat helps control the temperature of the  
cooking surface for gentle cooking or the long slow  
simmering that is needed for some foods. Use at low  
heat only.  
To simmer  
First bring the food to the boil over high heat.  
Then turn the burner off and carefully place the  
SimmerMat over the burner on the trivet/pan  
support, with the points facing upward. Re-light the  
burner, turn to Low and place your saucepan on top  
of the SimmerMat.  
Fig.11 Only use the SimmerMat  
on the Auxilliary burner  
Using a griddle (if supplied)  
Cooking with a griddle  
A griddle is ideal for cooking a variety of foods. The  
surfaces of a cast-iron griddle will become more and  
more non-stick as cooking oils become baked in. This  
‘seasoning’ process can be started by coating both  
surfaces of the griddle with cooking oil and baking in  
the oven at 150 OC (300 OF) for about an hour.  
Heat the griddle for a few minutes before using.  
Brush the food, not the griddle, with oil, to reduce  
splatter and smoking.  
Fig.12 Only use the griddle on the Fish burner  
Cook steak and vegetables at high temperatures on the ribbed side of the griddle. Turn the steak  
only once, about halfway through the cooking time. To test, press the surface of the steak. The  
softer the meat is, the ‘rarer’ or less well done it will be.  
Griddle scones, pancakes, pikelets, polenta and eggs are best cooked slowly at medium to low  
temperatures on the flat side of the griddle.  
Important!  
Prolonged cooking with the griddle at high temperatures may damage the cooktop.  
Cleaning a cast-iron griddle  
Leave the griddle to cool before cleaning. Scrape away any food residue and wash in warm soapy  
water.  
Do not scour to the bare metal when cleaning the griddle or you will remove the non-stick  
coating that has built up during cooking.  
Dry the griddle thoroughly and wipe with a thin coating of cooking oil to prevent rust forming,  
especially when the griddle is new.  
8
Care and cleaning  
General cleaning advice  
Clean the cooktop regularly – do not let stains become burnt on.  
Use soapy water and a soft sponge or cloth (use the mildest cleaner that will do the job). Do not  
use abrasive cleaners, steel soap pads or sharp objects on stainless steel.  
Soak stains under a soapy cloth.  
Clean brushed stainless steel in the direction of the grain.  
Rinse with clean water to ensure no cleaner residue is left (when heated this can stain the  
cooktop).  
Dry thoroughly to avoid leaving water marks. For extra shine on stainless steel, use a stainless  
steel polish.  
You can wash trivets/pan supports in the dishwasher.  
Clean the burner parts in hot soapy water. Make sure you keep the holes and slots clear.  
Thoroughly dry the burner parts. The flames will be irregular if the burner ring is not completely  
dry.  
Clean electrodes with a toothbrush and methylated spirits.  
Do not clean cooktop parts in a self-cleaning oven.  
Do not use a steam cleaner.  
After cleaning, replace the parts correctly on the cooktop, as shown in Fig. 13. When replacing  
the burner rings, turn the rings until the positioning teeth are placed correctly.  
For stubborn stains, see the ‘Cleaning chart.  
Trivet/pan support  
Burner cap  
Burner ring  
Electrode  
Fig.13 After cleaning, replace the parts correctly  
9
Care and cleaning  
Cleaning chart  
Cooktop part  
Cleaning  
Important  
Trivets/pan  
Hot soapy water and nylon scourer.  
Soaking in a solution of biological  
clothes washing detergent.  
Mild abrasive cream cleaners.  
Fume-free or heavy-duty oven cleaners  
(follow manufacturer’s instructions).  
Always allow cooktop parts to  
cool completely before cleaning  
them.  
supports, burner  
caps and enamel  
surfaces  
Always apply minimal pressure  
with abrasive cleaners.  
Remove spills as soon as the  
cooktop is cool to avoid the soil  
becoming burnt on.  
Burner parts  
Hot soapy water.  
Reassemble the burner parts  
correctly.  
To clear the holes use a stiff nylon  
brush or wire eg straight-ended paper  
clip.  
Mild abrasive cream cleaners.  
Control knobs  
Hot soapy water and a soft cloth.  
Stainless steel  
surfaces  
Soak stains under a hot soapy cloth,  
rinse and dry thoroughly.  
Hard water spots can be removed with  
household white vinegar.  
Never use harsh/abrasive  
cleaning agents as they will  
damage the stainless steel  
finish.  
Non-abrasive stainless steel cleaners.  
Regular use of a stainless steel polish  
will reduce fingerprints and other  
marks.  
Heavy soiling can be removed with  
fume-free or heavy-duty oven cleaner  
Chlorine or chlorine compounds  
in some cleaners are corrosive to  
stainless steel and may damage  
the appearance of your cooktop.  
Check the label on the cleaner  
before using.  
(follow manufacturer’s instructions).  
The graphics are etched onto  
the steel by laser and will not  
rub off.  
Electrodes  
Toothbrush and methylated spirits.  
A dirty or wet electrode will  
prevent the burner lighting  
efficiently.  
10  
Troubleshooting  
Troubleshooting chart  
Problem  
Possible solutions  
My cooktop does not light  
Check the cooktop is plugged in and the electricity is switched on.  
Check the gas supply valve is turned on and the supply to the  
house is working. You should hear the gas when you turn a burner  
on.  
The electrodes may be dirty. Clean them with a toothbrush and  
methylated spirits.  
The burner parts may not be located properly. Check the assembly  
and make sure the burner cap is sitting flat.  
My burner flames are  
yellow or hard to start  
The burner parts may not be located properly. Check the assembly  
and make sure the burner cap is sitting flat.  
If you use bottled gas this may indicate you are getting near the  
end of the bottle.  
Check the burner parts are clean and dry.  
The gas pressure may not be at the correct level. Check with your  
service person or installer.  
Your cooktop may not be set up for the gas you are using. Check  
this with your service person or installer.  
One of my burners has an  
uneven flame  
Check the burner parts are clean and dry. Check the assembly and  
make sure the burner cap is sitting flat.  
My cooktop goes out when Some cooktops have a safety feature called ‘flame failure. Hold  
I let go of the knob  
down the knob for approximately five seconds after the burner has  
lit. Releasing the knob too soon will extinguish the flame. See the  
‘Flame failure safety feature’ in ‘Using your cooktop.  
The flame goes out at low  
settings  
The gas supply pressure may be low. Check this with your service  
person or installer.  
The low setting may have been adjusted incorrectly. Check this  
with your service person or installer.  
My burners do not turn  
Your cooktop may not have been adjusted correctly. Check this  
down much (when running with your service person or installer.  
on bottled gas or LPG)  
The flame tips are very  
yellow  
Call your service person to service the cooktop.  
Call your service person to service the cooktop.  
There are objectionable  
odours  
The flame appears to lift off Call your service person to service the cooktop.  
the burner  
There is an electricity  
failure  
If there is an electricity failure, you can still use your cooktop.  
Light the burners by holding a match close to the side of the  
burner and turning the control knob to the High position. Wait  
until the flame is burning evenly before adjusting.  
11  
Warranty and service  
Before you call for service or assistance ...  
Check the things you can do yourself. Refer to the installation instructions and your user guide  
and check that:  
1
2
Your product is correctly installed.  
You are familiar with its normal operation.  
If after checking these points you still need assistance, please refer to the Service & Warranty  
book for warranty and after-sales service details or contact us through our website:  
Product details  
Fisher & Paykel Ltd  
Model  
Serial no.  
Purchaser  
Suburb  
Date of purchase  
Dealer  
Town  
Country  
Copyright © Fisher & Paykel 2005. All rights reserved.  
The product specifications in this booklet apply to  
the specific products and models described at the  
date of issue. Under our policy of continuous product  
improvement, these specifications may change at any  
time. You should therefore check with your Dealer to  
ensure this booklet correctly describes the product  
currently available.  
NZ AU  
Gas cooktops user guide  
Published: 11/2005  
Part No. 599276 A  

Geemarc Telephone Ring Amplifier and Flasher CL1 User Manual
GE DECT 9115 User Manual
GE AHR65 User Manual
Exido Ceramic Cooker Hob 258 050 User Manual
Electrolux 922050 User Manual
Dell Computer Monitor ST2310 User Manual
Cypress CY7C1440AV33 User Manual
Black Box Computer Hardware LMC5023C R3 User Manual
Asus Computer Monitor VE247 User Manual
Amana 8111P446 60 User Manual