user manual
Ceramic glass hob
EHS60210P
electrolux 3
Welcome to the world of Electrolux
Thank you for choosing a first class
product from Electrolux, which hopefully
will provide you with lots of pleasure in
the future. The Electrolux ambition is to
offer a wide variety of quality products
that make your life more comfortable.
You will find some examples on the cov-
er in this manual. Please take a few min-
utes to study this manual so that you
can take advantage of the benefits of
your new machine. We promise that it
will provide a superior User Experience
delivering Ease-of-Mind. Good luck!
4 electrolux contents
Contents
Safety instructions
Description of the Appliance
Operating the appliance
Tips on Cooking and Frying
Cleaning and Care
What to do if …
5
7
11
22
25
27
29
30
31
35
38
Disposal
Installation Instructions
Assembly
Guarantee/Customer Service
Service
The following symbols are used in this user information:
1 Warning! This must be read! Important advice for the safety of persons and
information on avoiding damage to the appliance
3 General information and advice
2 Information on environmental protection
z Dangerous voltage
safety instructions electrolux 5
General safety
•
The appliance may only be installed
and connected by trained, registered
service engineers.
• Built-in appliances may only be used
after they have built in to suitable
built-in units and work surfaces that
meet standards.
• In the event of faults with the appli-
ance or damage to the glass ceramic
(cracks, scratches or splits), the ap-
pliance must be switched off and
disconnected from the electrical
supply, to prevent the possibility of
an electric shock.
Safety instructions
Please comply with these instructions. If
you do not, any damage resulting is not
covered by the warranty.
Correct use
• This appliance is not intended for
use by children or other persons
whose physical, sensory or mental
capabilities or lack of experience and
knowledge prevents them from us-
ing the appliance safely without su-
pervision or instruction by a
• Repairs to the appliance must only
be carried out by trained registered
service engineers.
responsible person to ensure that
they can use the appliance safely.
Safety during use
• Overheated fats and oils can ignite
• Do not leave the appliance unattend-
very quickly. Warning! Fire hazard!
ed during operation.
• There is the risk of burns from the
• This appliance should be used only
for normal domestic cooking and fry-
ing of food.
appliance if used carelessly.
• Remove stickers and film from the
glass ceramic.
• The appliance must not be used as a
• Cables from electrical appliances
must not touch the hot surface of the
appliance or hot cookware.
work surface or as a storage surface.
• Additions or modifications to the ap-
pliance are not permitted.
• Switch the cooking zones off after
• Do not place or store flammable liq-
uids, highly inflammable materials or
fusible objects (e.g. plastic film, plas-
tic, aluminium) on or near the appli-
ance.
each use.
Safety when cleaning
• For cleaning, the appliance must be
switched off and cooled down.
• For safety reasons, the cleaning of
the appliance with steam jet or high-
pressure cleaning equipment is not
permitted.
Children’s safety
• Small children must be kept away
from the appliance.
• Only let bigger children work on the
appliance under supervision.
• To avoid small children and pets un-
intentionally switching the appliance
on, we recommend activation of the
child safety device.
6 electrolux safety instructions
How to avoid damage to the appli-
ance
• The glass ceramic can be damaged
by objects falling onto it.
• The edge of the glass ceramic can
be damaged by being knocked by
the cookware.
• Cookware made of cast iron, cast
aluminium or with damaged bottoms
can scratch the glass ceramic if
pushed across the surface.
• Objects that melt and things that boil
over can burn onto the glass ceramic
and should be removed straighta-
way.
• To avoid damaging cookware and
glass ceramics, do not allow sauce-
pans or frying pans to boil dry.
• Do not use the cooking zones with
empty cookware or without cook-
ware.
description of the appliance electrolux 7
Description of the Appliance
Cooking surface layout
Multi-purpose zone
1500/2400W
Single cooking zone
1200W
Triple cooking zone
800/1600/2300W
Control panel
Single cooking zone
1200W
Control panel layout
Cooking zone indicators
Timer function
STOP+GO
with indicator
Child lock
with display
Cooking zone switch
with indicator
Automatic
Timer display
Heat setting indicator
warm-up
Automatic
switch-off
indicator
Heat setting selection
Residual heat indicator
Triple cooking zone
switch with indicator
On/Off
with indicator
Timer
8 electrolux description of the appliance
Touch Control sensor fields
The appliance is operated using Touch
Control sensor fields. Functions are
controlled by touching sensor fields and
confirmed by displays and acoustic sig-
nals.
Touch the sensor fields from above,
without covering other sensor fields.
Sensor field
On / Off
Function
To switch the appliance on and off
Locking control panel for children
To switch the Keep Warm setting on/off
To switch off the cooking zone
To set heat settings
Child lock
Stop+Go
Cooking zone Off
1 - 9 / Heat settings
Automatic warm-up
Switch on the automatic warm-up
function
TIMER
Timer
Timer selection
Increase settings
Reduce settings
Triple ring switch
To increase Timer time
To reduce Timer time
To switch outer rings on and off
Multi-purpose zone switch To switch the outside ring on and off
description of the appliance electrolux 9
Displays
Display
Description
Residual heat
Cooking zone is still hot
Middle ring of triple-ring
function
The middle ring of the triple-ring function
is on
Outer ring of triple-ring func- The outer ring of the triple-ring function
tion is on
Outer ring of multi-purpose The outer ring of the multi-purpose
function
function is on
+
Fault
Malfunction has occurred
number
Automatic switch off
Switch off is active.
Residual heat indicator
Warning! Risk of burns from residu-
al heat. After being switched off, the
cooking zones need some time to
cool down. Look at the residual heat
indicator
.
Residual heat can be used for melt-
ing and keeping food warm.
10 electrolux description of the appliance
Control bar
You can set the heat setting and auto-
matic warm-up function via the control
panel. The heat setting indicator com-
prises a row of lights.
Operational readiness indica-
tor for cooking zone
Heat setting indicator
Heat setting selection
Automatic warm-up
indicator
Automatic warm-up
function
Cooking zone Off
If the control bar is touched for
longer than 6 seconds, a signal
sounds and the appliance switches
itself off.
operating the appliance electrolux 11
Operating the appliance
Switching the appliance on and off
Control panel
Display
To switch on
To switch off
Touch
Touch
for 1 second
for 1 second
lights up. The opera-
tional readiness
indicators of the indi-
vidual cooking zones
also light up.
goes out. The opera-
tional readiness
indicators of the indi-
vidual cooking zones
also go out.
After switching on, within approx.
10 seconds a heat setting or a func-
tion must be set, otherwise the ap-
pliance automatically switches
itself off.
12 electrolux operating the appliance
Setting the heat setting
The control bar is touched where the
desired heat setting is positioned. The
heat setting is shown in the display. Cor-
rect to the left or the right, if necessary.
Do not release before the desired heat
setting is reached.
operating the appliance electrolux 13
Switching the outside ring on and
off
By switching the outside rings on or off,
the effective heating surface can be
matched to the size of the cookware.
Before an outside ring can be
switched on, the inside ring must be
switched on.
Triple cooking zone
Sensor field
for 1-2 seconds
Display
Switch on the middle ring Touch
Switch on the outer ring Touch
Switch off the outer ring Touch
Switch off the middle ring Touch
lights up
for 1-2 seconds
for 1-2 seconds
for 1-2 seconds
and light up
goes out
goes out
Cooking zone
Sensor field
Display
Switch on the outer ring Touch
onds
for 1-2 sec-
lights up
Switch off the outer ring Touch
onds
for 1-2 sec-
goes out
14 electrolux operating the appliance
Locking/unlocking the control
panel
The control panel, with the exception of
the “On/Off” sensor field, can be locked
at any time in order to prevent the set-
tings being changed e.g. by wiping over
the panel with a cloth.
Control panel
Display
lights up
goes out
To switch on Touch
To switch off Touch
for 4 seconds
for 4 seconds
When you switch the appliance off,
the locking function is automatically
switched off.
operating the appliance electrolux 15
Switching the STOP+GO func-
tion on and off
The STOP+GO function simultaneously
switches all cooking zones that are
switched on to the keep warm setting
and then back to the heat setting that
was previously set.
Control panel
To switch on Touch
Display
To switch off Touch
heat setting that was previously set
(not automatic warm up function)
Timer functions are not stopped by
STOP+GO.
STOP+GO locks the whole control
panel except the sensor field
.
16 electrolux operating the appliance
Using the automatic warm-up
function
All cooking zones are equipped with an
automatic warm-up function. When set-
ting a heat setting using the automatic
warm-up function, the cooking zone
switches to full power for a certain
amount of time and then automatically
switches back to the heat setting set.
Step
Control panel
Display
display flashes
1.
2.
Select warm-up setting
Select the desired heat setting between The desired heat setting is
1 and 8
displayed.
up.
display lights
As long as the
display is
lit, the appliance is working
at full power.
After the automatic warm-up
is completed, the
goes out.
display
The length of time that the automatic
warm up function operates depends on
the heat setting selected.
Heat setting
Warm-up time
[min:sec]
1:00
1:40
4:50
6:30
10:10
2:30
3:30
4:30
---
operating the appliance electrolux 17
Using the child safety device
The child safety device prevents unin-
tentional use of the appliance.
Switching on the child safety device
Step
Control panel
Pilot light
1.
Switch on appliance. (Do not set a lights up. The operational
heat setting.)
readiness indicators of the
individual cooking zones
light up.
2.
Touch
for 4 seconds
over
lights up
The child safety device is switched on
Overriding the child safety device
The child safety device can be switched
off in this way for a single cooking ses-
sion; it remains activated afterwards.
Step
Control panel
Switch appliance on
Touch for 4 seconds
Pilot light
lights up
1.
2.
over
over
goes out.
Until the appliance is next switched off, it can used as normal.
After overriding the child safety de-
vice, a heat setting or a function
must be set within
approx. 10 seconds, otherwise the
appliance automatically switches it-
self off.
Switching off the child safety device
Step
Control panel
Pilot light
1.
Switch on appliance. (Do not set a above
heat setting.)
lights up
2.
3.
Touch
for 4 seconds
above
goes out
Switch appliance off.
The child safety device is switched off.
18 electrolux operating the appliance
Using the timer
Function
Condition
Outcome after the
time has elapsed
Automatic cut-out
a heat setting is set
acoustic signal
00flashes
Cooking zone switches
off
Countdown timer
cooking zones not in use
acoustic signal
00flashes
If a heat setting is set on this cook-
ing zone in addition to a countdown
timer, the cooking zone is switched
off after the time set has elapsed.
If a cooking zone is switched off, the
timer function set is also switched
off.
operating the appliance electrolux 19
Selecting a cooking zone
Step Control panel
Display
1.
2.
3.
4.
Touch TIMER once
Touch TIMER once
Touch TIMER once
Touch TIMER once
Pilot light of the first cooking
zone flashes
Pilot light of the second
cooking zone flashes
Pilot light of the third cooking
zone flashes
Pilot light of the fourth cooking
zone flashes
If the pilot light is flashing more
slowly, the heat setting can be set or
modified.
If other timer functions are set, after
a few seconds the shortest remain-
ing time of all the timer functions is
displayed and the corresponding pi-
lot light flashes.
20 electrolux operating the appliance
Setting the time
Step
Control panel
Indicator
1.
Select
ing zone
TIMER cook- Pilot light for the cooking zone selected
flashes
2.
Touch or
00to 99 minutes
After a few seconds the pilot light flashes more slowly.
The time is set.
The time counts down.
Switching off the timer function
Step
Control panel
Indicator
1.
Select
ing zone
TIMER cook- Pilot light of cooking zone selected flashes
faster
Time remaining is displayed
2.
Touch
The time remaining counts backwards to 00.
The pilot light goes out.
The Timer function for the selected cooking zone is switched off.
Changing the time
Step
Control panel
Indicator
1.
Select
ing zone
TIMER cook- Pilot light of the selected cooking zone
flashes faster
Time remaining is displayed
2.
Touch or
01to 99 minutes
After a few seconds, the pilot light flashes more slowly.
The time is set.
The time counts down.
Displaying the time remaining for a cooking zone
Step
Control panel field
Display
1.
TIMER Select cooking Pilot light of the cooking zone selected
zone
flashes faster
The time remaining is displayed
After a few seconds the pilot light flashes more slowly.
Switching off the acoustic signal
Step
Control panel field
Touch TIMER
Acoustic signal
1.
Acoustic signal to acknowledge.
Acoustic signal stops.
operating the appliance electrolux 21
Automatic switch off
Cooking surface
• If after switching on the cooking sur-
face, a heat setting is not set for a
cooking zone within approx. 10 sec-
onds, the cooking surface automati-
cally switches itself off.
• If one or more sensor fields are cov-
ered by objects (a pan, etc.) for long-
er than approx. 10 seconds, a signal
sounds and the cooking surface
switches off automatically.
• If all cooking zones are switched off,
the cooking surface automatically
switches itself off after approx. 10
seconds.
Control panel
• When the appliance is switched off, if
one or more of the sensor fields on
the control panel are covered for
more that 10 seconds, an acoustic
signal sounds. The acoustic signal
switches itself off automatically when
the sensor fields are no longer cov-
ered.
Cooking zones
• If one of the cooking zones is not
switched off after a certain time, or if
the heat setting is not modified, the
relevant cooking zone switches off
automatically. is displayed. Before
being used again, the cooking zone
must be set to
.
Heat setting
Switches off after
6 hours
1- 2
3- 4
5
5 hours
4 hours
6- 9
1.5 hours
22 electrolux tips on cooking and frying
Tips on Cooking and Frying
Information on acrylamides
According to the latest scientific
knowledge, intensive browning of
food, especially in products con-
taining starch, can constitute a
health risk due to acrylamides.
Therefore we recommend cooking
at the lowest possible temperatures
and not browning foods too much.
Cookware
• You can recognise good cookware
from the bottoms of the pans. The
bottom should be as thick and flat as
possible.
• Cookware made of enamelled steel
or with aluminium or copper bottoms
can leave discolorations on the glass
ceramic surface which are difficult or
impossible to remove.
tips on cooking and frying electrolux 23
Energy saving
Always place cookware on the
cooking zone before it is switched
on.
If possible, always place lids on the
pans.
Switch cooking zones off before the
end of the cooking time, to take ad-
vantage of residual heat.
Bottom of pans and cooking zones
should be the same size.
24 electrolux tips on cooking and frying
Examples of cooking applications
The information given in the following table is for guidance only.
Heat
set-
ting
Cooking-
process
Cooking
time
suitable for
Tips/Hints
0
Residual heat, Off position
Keeping
food
1
Keeping cooked foods warm as required
Hollandaise sauce,
melting butter, chocolate,
gelatine
Cover
warm
Melting
5-25 mins.
Stir occasionally
Cook with lid on
1-2
Solidi-
fying
Fluffy omelettes, baked eggs 10-40 mins.
Simmering rice and milk-
Add at least twice as
much liquid as rice, stir
milk dishes part way
through cooking
Simmer-
ingonlow
heat
based dishes
2-3
3-4
25-50 mins.
Heating up ready-cooked
meals
With vegetables add only
Steaming
Braising
Steaming vegetables, fish
20-45 mins. a little liquid (a few table-
spoons)
braising meat
Use only a little liquid, e.
Steaming potatoes
20-60 mins.
g.: max.
¼
l water for
750 g potatoes
4-5
Boiling
Cooking larger quantities of
food, stews and soups
Up to 3 l liquid plus
ingredients
60-150 mins.
Frying escalopes, veal cor-
don bleu, cutlets, rissoles,
sausages, liver, roux, eggs,
pancakes, doughnuts
Gentle
Frying
Turn halfway through
cooking
6-7
7-8
9
Steady frying
Hash browns, loin steaks,
steaks, Flädle (pancakes for
garnishing soup)
Heavy
Frying
5-15 mins.
per pan
Turn halfway through
cooking
Boiling
Searing
Deep
Boiling large quantities of water, cooking pasta, searing meat (goulash,
pot roast), deep frying chips
frying
cleaning and care electrolux 25
Cleaning and Care
Take care! Risk of burns from resid-
ual heat.
Warning! Sharp objects and abra-
sive cleaning materials will damage
the appliance. Clean with water and
washing up liquid.
Warning! Residues from cleaning
agents will damage the appliance.
Remove residues with water and
washing up liquid.
Cleaning the appliance after each
use
1. Wipe the appliance with a damp
cloth and a little washing up liquid.
2. Rub the appliance dry using a clean
cloth.
26 electrolux cleaning and care
Removing deposits
1. Place a scraper on the glass ceramic
surface at an angle.
2. Remove residues by sliding the
blade over the surface.
3. Wipe the appliance with a damp
cloth and a little washing up liquid.
4. Rub the appliance dry using a clean
cloth.
Remove
im-
medi-
ately
when the appliance
has cooled down
Type of dirt
using
sugar, food containing sugar
plastics, tin foil
yes
yes
---
---
---
a scraper*
limescale and water rings
fat splashes
yes
yes
yes
cleaner for glass ce-
ramic or stainless
steel*
---
shiny metallic discolouration
---
*Scrapers and cleaners for glass ceramic and
stainless steel can be purchased in specialized
shops
Remove stubborn residues with a
cleaner for glass ceramic or stain-
less steel.
Scratches or dark stains on the
glass ceramic that cannot be re-
moved do not however affect the
functioning of the appliance.
what to do if … electrolux 27
What to do if …
Problem
Possible cause
Remedy
The cooking zones cannot be More than 10 seconds have
switched on or are not operat- passed since the appliance
Switch the appliance on again.
ing
was switched on
The child safety device is
switched on
Deactivate child safety device
(See the section “Child safety
device”)
Several sensor fields were
touched at the same time
Only touch one sensor field
Automatic switch-off has been Remove any objects (pan,
triggered
cloths, etc.) that are lying on
the control panel. Switch ap-
pliance on again
There is water on the control Wipe the control panel
panel or the control panel is
covered with fat splashes
Acoustic signal sounds when The control panel is wholly or Remove objects.
appliance is switched off
partly covered by objects.
There is water on the control Wipe the control panel
panel or the control panel is
covered with fat splashes
The residual heat indicator is The cooking zone was only on If the cooking zone is sup-
not displaying anything for a short time and is therefore posed to be hot, call the Cus-
not hot tomer Service Department.
The signal sounds and the ap- Something is covering the On/ Do not put any objects on the
pliance turns itself on, then off Off sensor field
again after 5 seconds. After
another 5 seconds the signal
sounds again.
control panel
lights up
Automatic switch-off has been Switch off the cooking zone.
triggered
Switch the cooking zone on
again
and a number is displayed Electronics fault
Disconnect appliance from the
electrical supply for a few min-
utes. (Take the fuse out of the
house’s wiring system.)
If you still see anda number
after switching the appliance
back on, call the Customer
Service Department
28 electrolux what to do if …
If you are unable to remedy the
problem by following the above
suggestions, please contact your
local Service Force Centre.
Warning! Repairs to the appliance
are only to be carried out by quali-
fied service engineers. Considera-
ble danger to the user may result
from improper repairs.
If the appliance has been operated
incorrectly, the engineer's visit will
be chargeable, even during the war-
ranty period.
disposal electrolux 29
Disposal
Packaging material
The packaging materials are envi-
ronmentally friendly and can be re-
cycled. The plastic components are
identified by markings, e.g. >PE<,
>PS<, etc. Please dispose of the
packaging materials in the appro-
priate container at the community
waste disposal facilities.
Old appliance
The symbol
W
on the product or on
its packaging indicates that this
product may not be treated as
household waste. Instead it shall be
handed over to the applicable col-
lection point for the recycling of
electrical and electronic equipment.
By ensuring this product is dis-
posed of correctly, you will help pre-
vent potential negative
consequences for the environment
and human health, which could oth-
erwise be caused by inappropriate
waste handling of this product. For
more detailed information about re-
cycling of this product, please con-
tact your local city office, your
household waste disposal service
or the shop where you purchased
the product.
30 electrolux installation instructions
Installation Instructions
z Risk of injury from electrical
current.
• Loose and inappropriate plug and
socket connections can make the
terminal overheat.
• Have the clamping connections cor-
rectly installed by a qualified electri-
cian.
Safety instructions
Warning! This must be read!
The laws, ordinances, directives and
standards in force in the country of use
are to be followed (safety regulations,
proper recycling in accordance with the
regulations, etc.)
• Use strain relief clamp on cable.
• In the event of single-phase or two-
phase connection, the appropriate
mains cable of type H05BB-F Tmax
90°C(or higher) must be used.
• If this appliance’s mains cable is
damaged, it must be replaced by a
special cable (type H05BB-F Tmax
90°C; or higher). The latter is availa-
ble from the Customer Care Depart-
ment.
A device must be provided in the electri-
cal installation which allows the appli-
ance to be disconnected from the mains
at all poles with a contact opening width
of at least 3 mm.
Suitable isolation devices include line
protecting cut-outs, fuses (screw type
fuses are to be removed from the hold-
er), earth leakage trips and contactors.
Installation may only be carried out by a
qualified electrician.
The minimum distances to other appli-
ances and units are to be observed.
Anti-shock protection must be provided
by the installation, for example drawers
may only be installed with a protective
floor directly underneath the appliance.
The cut surfaces of the worktop are to
be protected against moisture using a
suitable sealant.
The sealant seals the appliance to the
work top with no gap.
Avoid installing the appliance next to
doors and under windows. Otherwise
hot cookware may be knocked off the
rings when doors and windows are
opened.
Sticking on the seal
• Clean the worktop around the cut-
out area.
z Risk of injury from electrical
current.
• Stick the single-sided adhesive seal-
ing tape provided on the underside
of the hob around the outside edge
ensuring that it is not stretched. The
two ends of the tape should join in
the middle of one side. After trim-
ming the tape (allow it to overlap by
2-3 mm), press the two ends togeth-
er.
• The electrical mains terminal is live.
• Make electrical mains terminal free of
voltage.
• Follow connection schematic.
• Observe electrical safety rules.
• Ensure anti-shock protection by in-
stalling correctly.
• The appliance must be connected to
the electrical supply by a qualified
electrician.
assembly electrolux 31
Assembly
32 electrolux assembly
assembly electrolux 33
34 electrolux
Rating Plate
EHS60210P
55HAD56AO
949 592 910
7,1 kW
230 V
50 Hz
ELECTROLUX
guarantee/customer service electrolux 35
Guarantee/Customer Service
European Guarantee
This appliance is guaranteed by Electrolux in
each of the countries listed at the back of this
user manual, for the period specified in the appli-
ance guarantee or otherwise by law. If you move
from one of these countries to another of the
countries listed below the appliance guarantee
will move with you subject to the following qual-
ifications:
•
The appliance guarantee starts from the date
you first purchased the appliance which will
be evidenced by production of a valid pur-
chase document issued by the seller of the
appliance.
•
The appliance guarantee is for the same pe-
riod and to the same extent for labour and
parts as exists in your new country of resi-
dence for this particular model or range of
appliances.
•
•
The appliance guarantee is personal to the
original purchaser of the appliance and can-
not be transferred to another user.
The appliance is installed and used in ac-
cordance with instructions issued by Elec-
trolux and is only used within the home, i.e. is
not used for commercial purposes.
The appliance is installed in accordance with
all relevant regulations in force within your
new country of residence.
•
The provisions of this European Guarantee do
not affect any of the rights granted to you by law.
36 electrolux guarantee/customer service
p
t
b
Albania
+35 5 4 261 450
+32 2 363 04 44
Rr. Pjeter Bogdani Nr. 7 Tirane
Belgique/België/
Belgien
Bergensesteenweg 719, 1502 Lembeek
Èeská republika
Danmark
+420 2 61 12 61 12
+45 70 11 74 00
+49 180 32 26 622
+37 2 66 50 030
Budìjovická 3, Praha 4, 140 21
Sjællandsgade 2, 7000 Fredericia
Muggenhofer Str. 135, 90429 Nürnberg
Mustamäe tee 24, 10621 Tallinn
Deutschland
Eesti
Carretera M-300, Km. 29,900
Alcalá de Henares Madrid
España
+34 902 11 63 88
+44 8705 929 929
France
Addington Way, Luton, Bedfordshire
LU4 9QQ
Great Britain
Hellas
+30 23 10 56 19 70
+385 1 63 23 338
+353 1 40 90 753
+39 (0) 434 558500
+37 17 84 59 34
+3702780607
4 Limnou Str., 54627 Thessaloniki
Slavonska avenija 3, 10000 Zagreb
Long Mile Road Dublin 12
Hrvatska
Ireland
Italia
C.so Lino Zanussi, 26 - 33080 Porcia (PN)
Kr. Barona iela 130/2, LV-1012, Riga
Žirmūnų 67, LT-09001 Vilnius
Latvija
Lithuania
Luxembourg
+352 42 431 301
Rue de Bitbourg, 7, L-1273 Hamm
H-1142 Budapest XIV,
Magyarország
Nederland
+36 1 252 1773
Erzsébet királyné útja 87
Vennootsweg 1, 2404 CG -
Alphen aan den Rijn
+31 17 24 68 300
Norge
+47 81 5 30 222
+43 18 66 400
Risløkkvn. 2 , 0508 Oslo
Herziggasse 9, 1230 Wien
ul. Kolejowa 5/7, Warszawa
Österreich
Polska
+48 22 43 47 300
Quinta da Fonte - Edificio Gonçalves Zarco -
Q 35
Portugal
Romania
+35 12 14 40 39 39
2774 - 518 Paço de Arcos
+40 21 451 20 30
+41 62 88 99 111
Str. Garii Progresului 2, S4, 040671 RO
Industriestrasse 10, CH-5506 Mägenwil
Schweiz/Suisse/
Svizzera
Electrolux Ljubljana d.o.o.
Gerbièeva 98, 1000 Ljubljana
Slovenija
+38 61 24 25 731
Electrolux Slovakia s.r.o., Electrolux Domáce
spotrebièe SK, Seberíniho 1, 821 03 Bratisla-
va
Slovensko
Suomi
+421 2 43 33 43 22
guarantee/customer service electrolux 37
p
t
b
Electrolux Service, S:t Göransgatan 143,
S-105 45 Stockholm
Sverige
Türkiye
Ðîññèÿ
Óêðà¿íà
+46 (0)771 76 76 76
+90 21 22 93 10 25
+7 495 937 7837
Tarlabaþý caddesi no : 35 Taksim
Istanbul
129090 Ìîñêâà, Îëèìïèéñêèé ïðîñïåêò, 16,
ÁÖ „Îëèìïèê“
04074 Êè¿â, âóë.Àâòîçàâîäñüêà,
2a, ÁÖ „Àëêîí“
+380 44 586 20 60
38 electrolux service
Service
In the event of technical faults, please
first check whether you can remedy the
problem yourself with the help of the op-
erating instructions (section “What to do
if…”).
If you were not able to remedy the prob-
lem yourself, please contact the Cus-
tomer Care Department or one of our
service partners.
In order to be able to assist you quickly,
we require the following information:
– Model description
– Product number (PNC)
– Serial number (S No.)
(for numbers see rating plate)
– Type of fault
– Any error messages displayed by the
appliance
– three digit letter-number combina-
tion for glass ceramic
So that you have the necessary refer-
ence numbers from your appliance at
hand, we recommend that you write
them in here:
Model description: .....................................
PNC:
S No:
.....................................
.....................................
867 201 361-M-141207-01
|