78001KF-N
Ceramic glass induction hob
Installation and Operating Instructions
Contents
Operating Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Safety instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4
4
Description of the Appliance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cooking surface layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Control panel layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Touch Control sensor fields. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Residual heat indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6
6
7
7
8
8
Operating the appliance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Switching the appliance on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Selecting the heat setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9
9
9
Switching the STOP+GO function on and off. . . . . . . . . . . . . . . . . . . . . . . . . 10
Using the automatic warm-up function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Locking/unlocking the control panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Using the child safety device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Switching the power function on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Using the timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Cooking over two cooking zones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Safety cut-out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Tips on cooking and frying. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Cookware for induction cooking zones. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Tips on energy saving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Examples of cooking applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
What to do if … . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Installation Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Rating Plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Warranty conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Service and Spare Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
3
Operating Instructions
1 Safety instructions
3 Please comply with these instructions. If you do not, any damage re-
sulting is not covered by the warranty.
5 This appliance conforms with the following EU Directives:
– 73/23/EEC dated 19.02.1973 Low Voltage Directive
– 89/336/EEC dated 03.05.1989 EMC Directive inclusive of Amending
Directive 92/31/EEC
– 93/68/EEC dated 22.07.1993 CE Marking Directive
Correct use
• This appliance should be used only for normal domestic cooking and
frying of food.
• The appliance must not be used as a work surface or as a storage sur-
face.
• Additions or modifications to the appliance are not permitted.
• Do not place or store flammable liquids, highly inflammable materials
or fusible objects (e.g. plastic film, plastic, aluminium) on or near the
appliance.
Child safety
• Small children must be kept away from the appliance.
• Only let bigger children work on the appliance under supervision.
• To avoid small children and pets unintentionally switching the appli-
ance on, we recommend activation of the child safety device.
General safety
• The appliance may only be installed and connected by trained, regis-
tered service engineers, or competent persons.
• Built-in appliances may only be used after they have been built in to
suitable built-in units and work surfaces that meet standards.
• In the event of faults with the appliance or damage to the glass ce-
ramic (cracks, scratches or splits), the appliance must be switched off
and disconnected from the electrical supply to prevent the possibility
of an electric shock.
• Repairs to the appliance must only be carried out by trained regis-
tered service engineers.
4
Safety during use
• Remove stickers and film from the glass ceramic.
• There is the risk of burns from the appliance if used carelessly.
• Cables from electrical appliances must not touch the hot surface of
the appliance or hot cookware.
• Overheated fat and oil can ignite quickly. When cooking with fat or
oil (e.g. frying chips) do not leave the appliance unattended.
• Switch the cooking zones off after each use.
• Users with implanted pacemakers should keep their upper body at
least 30 cm from induction cooking zones that are switched on.
• Risk of burns! Do not place objects made of metal, such as knives,
forks, spoons and saucepan lids on the cooking surface, as they can
get hot.
Safety when cleaning
• For cleaning, the appliance must be switched off and cooled down.
• For safety reasons, the cleaning of the appliance with steam jet or
high-pressure cleaning equipment is not permitted.
How to avoid damage to the appliance
• The ceramic glass can be damaged by objects falling onto it.
• The edge of the ceramic glass can be damaged by being knocked by
the cookware.
• Cookware made of cast iron, cast aluminium or with damaged bot-
toms can scratch the ceramic glass if pushed across the surface.
• Objects that melt and things that boil over can burn onto the ceramic
glass and should be removed straightaway.
• Do not use the cooking zones with empty cookware or without cook-
ware.
• To avoid damaging cookware and glass ceramics, do not allow sauce-
pans or frying pans to boil dry.
• The ventilation gap of 5mm between the worktop and front of the
unit underneath it must not be covered.
5
Description of the Appliance
Cooking surface layout
Induction cooking zone 2300W
with power function 3200W
Induction cooking zone 2300W
with power function 3200W
Control panel
Control panel
Induction cooking zone 2300W
with power function 3200W
Induction cooking zone 2300W
with power function 3200W
The cooking surface is divided into four cooking zones. In each cooking
zone under the glass ceramic is an induction heating element, the mid-
dle of each one being marked with a cross on the glass ceramic surface.
Cookware can be placed on any of the cooking zones. But the cross
must be completeely covered by the cookware.
The bottom of the cookware must be from 130-210mm in diameter.
Larger cookware such as a roaster, for example, can be heated on two
cooking zones. If doing this, cookware must cover at least the middle of
the two crosses.
6
Control panel layout
Cooking zone in-
dicators Timer
Timer
On/Off
with power indicator
Timer display
STOP+GO
Power function
Lock
Heat setting selection
Display
Power function
Touch Control sensor fields
The appliance is operated using Touch Control sensor fields. Functions
are controlled by touching sensor fields and confirmed by displays and
acoustic signals.
Touch the sensor fields from above, without covering other sensor
fields.
Sensor field
On / Off
Function
Switches appliance on and off
Increasing heat setting/time
Decreasing heat setting/time
Timer selection
Increase settings
Decrease settings
Timer
Lock
Locking/unlocking the control
panel
Power
Switching the power function on
and off
Stop+Go
To switch the Keep Warm setting
on/off
1 Warning! Risk of burns from heat emitted. Lengthy cooking on higher
settings with larger cookware on the front cooking zones can heat the
sensor fields. Take care when touching sensor fields.
7
Displays
Display
Description
¾
u
Cooking zone is switched off
Keep warm setting
Keep warm setting/STOP+GO
function is set
¿ - Ç Heat settings
Heat setting is set
2 - 6 Heating setting plus
Intermediate heat setting is set
decimal point
a
Automatic warm up
function
Automatic warm-up function is
activated
e
f
Fault
Malfunction has occurred
Pan detection
Cookware is unsuitable or too
small or no cookware has been
placed on the cooking zone
h
l
p
_
Residual heat
Child safety device
Power
Cooking zone is still hot
Lock/child safety device is set.
Power function is switched on
Safety cut-out has been activated
Safety cut-out
Residual heat indicator
1 Warning! Risk of burns from residual heat. After being switched off,
the cooking zones need some time to cool down. Look at the residual
heat indicator h .
3 Residual heat can be used for melting and keeping food warm.
The induction cooking zones create the heat required for cooking di-
rectly in the base of the cookware. The glass ceramic is merely heated
by the residual heat of the cookware.
The cooling fan switches itself on and off depending upon the temper-
ature of the electronics.
8
Operating the appliance
3 Use the induction cooking zones with suitable cookware.
Switching the appliance on and off
Control panel
Touch for 2 seconds ¾ / h
Touch for 1 second h / none
Display
Pilot light
lights up
goes out
Switch on
Switch off
3 After switching on, within approx. 10 seconds a heat setting or a func-
tion must be set, otherwise the appliance automatically switches itself
off.
Selecting the heat setting
Control panel
Touch
Display
u to Ç / p
Ç to ¾
¾
Increase
Decrease
Switch off
Touch
Touch
and
at the same time
3 The keep warm setting u lies between ¾ and ¿. It is used to keep
food warm.
9
Switching the STOP+GO function on and off
The STOP+GO function simultaneously switches all cooking zones that
are switched on to the keep warm setting and then back to the heat
setting that was previously set. This function can be used to briefly in-
terrupt and then continue the cooking process e.g. to take a telephone
call.
Control panel
Display
To switch
on
Touch
u
To switch
off
Touch
heat setting that was previ-
ously set (not automatic
warm up function)
3 Timer functions are not stopped by
.
3
locks the whole control panel except the sensor field
.
10
Using the automatic warm-up function
Step Control panel
Setting the maximum setting
Display
1.
2.
3.
4.
Ç / p
Ç / p
a
Place to one side for a moment
touch
touch in order to set the de-
sired cooking setting
Æ until ¿ / u
after 3 seconds a
All cooking zones are equipped with an automatic warm-up function.
The automatic warm-up function sets the cooking zone to the highest
setting for a certain period of time and then automatically switches
back to the cooking setting that was originally set.
3 If during the automatic warm up a a higher heat setting is selected,
e.g. from Á to Ã, the automatic warm up is adjusted.
The length of time that the automatic warm up function operates de-
pends on the heat setting selected.
Heat
setting
Length of the
Intermedi- Length of the
automatic warm up ate
automatic warm up
[min:sec]
[min:sec]
heat
setting
v
1
2
3
4
5
6
7
8
9
0:10
0:10
0:10
3:10
5:50
10:10
2:00
2:30
2:50
---
2.
3.
4.
5.
6.
1:20
4:20
8:10
10:30
2:00
11
Locking/unlocking the control panel
The control panel, with the exception of the “On/Off” sensor field, can
be locked at any time in order to prevent the settings being changed
e.g. by wiping over the panel with a cloth.
Control panel
Switch on Touch
Switch off Touch
Display
l (for 5 seconds)
previously set heat setting
3 When you switch the appliance off, the locking function is automati-
cally switched off.
12
Using the child safety device
The child safety device prevents unintentional use of the appliance.
Setting the child safety device
Step
Control panel
Display/Signal
1.
Switch on the appliance
(Do not set a heat setting)
¾
2.
3.
Touch
Touch
until the signal sounds Acoustic signal
l
Appliance switches off. The child safety device is set.
Releasing the child safety device
Step
Control panel
Display/Signal
1.
2.
3.
Switch on the appliance
l
Touch
Touch
until the signal sounds Acoustic signal
Appliance switches off. The child safety device is released.
Overriding the child safety device
The child safety device can be released in this way for a single cooking
session; it remains activated afterwards.
Step
Control panel
Display/Signal
1.
2.
Switch on the appliance
l
Touch
and
at the same time ¾ / acoustic signal
Until the appliance is next switched off, it can used as normal.
13
Switching the power function on and off
The power function
makes more power available to the induction
cooking zones, e.g. to bring a large quantity of water to the boil quick-
ly.
The power function is activated for 10 minutes. After that the induc-
tion cooking zone automatically switches back to heat setting 9.
Control panel
Touch
Display
p
Switch on
Switch off
Touch
Ç
Touch
Ç
3 If the power function has ended, the cooking zones automatically
switch back to the heat setting set previously.
Power Management
The cooking zones have a maximum
power available to them.
If this power range is exceeded by
switching on the power function,
Power Management reduces the
heat setting of another cooking
zone.
The indicator for this cooking zone
changes between the heat setting
set and maximum possible heat set-
ting for 1 minute. Thereafter the ac-
tual heat setting is displayed.
Example:
Last
cooking zone
switched on
Other cooking zone
set heat setting set heat
setting
indicator
actual
heat setting
P
9
8
9
9
8
5alternating with 9 5
7alternating with 9 7
8
8
14
Using the timer
All cooking zones can use each use one of the two timer functions at
the same time.
Function
Condition
Outcome after the
time has elapsed
Automatic cut-out
a heat setting is set
acoustic signal
00flashes
Cooking zone
switches off
Countdown timer cooking zones not in use
acoustic signal
00flashes
3 If a cooking zone is switched off, the timer function set is also switched
off.
3 If a heat setting is set on this cooking zone in addition to a countdown
timer, the cooking zone is switched off after the time set has elapsed.
Selecting a cooking zone
Step
Control panel
Display
1.
2.
3.
4.
Touch
once
once
once
once
Pilot light of the first
cooking zone flashes
Touch
Touch
Touch
Pilot light of the second
cooking zone flashes
Pilot light of the third
cooking zone flashes
Pilot light of the fourth
cooking zone flashes
3 The heat setting indicator of the selected cooking zone goes out, as
long as the timer time can be set.
15
3 If the pilot light is flashing more slowly, the heat setting indicator ap-
pears again and the heat setting can be re-set or modified.
3 If other timer functions are set, after a few seconds the shortest re-
maining time of all the timer functions is displayed and the corre-
sponding pilot light flashes.
Setting the time
Step
1.
Control panel field Display
Select cooking Pilot light of the cooking zone select-
zone
ed flashes
2.
Touch
the cooking zone se-
lected
or for 00to 99 minutes
After a few seconds the pilot light flashes more slowly.
The time is set.
The time counts down.
Switching off the Timer function
Step
1.
Control panel
Display
Select a cook- Pilot light of the selected cooking
ing zone
Touch
zone flashes more quickly.
Remaining time is displayed
2.
for the
The remaining time counts down to
cooking zone select- 00.
ed
Simultaneoulsy
touch and for
the cooking zone se-
lected
00is displayed.
The pilot light goes out.
The Timer function for the selected cooking zone is switched off.
16
Changing the time
Step
1.
Control panel field Display
Select cooking Pilot light of the cooking zone select-
ed flashes faster
zone
The time remaining is displayed
2.
Touch
the cooking zone se-
lected
or
for 01to 99 minutes
After a few seconds the pilot light flashes more slowly.
The time is set.
The time counts down.
Displaying the time remaining for a cooking zone
Step
1.
Control panel field Display
Select cooking Pilot light of the cooking zone select-
zone
ed flashes faster
The time remaining is displayed
After a few seconds the pilot light flashes more slowly.
Switching off the acoustic signal
Step
1.
Control panel field Acoustic signal
Touch Acoustic signal to acknowledge.
Acoustic signal stops.
17
Cooking over two cooking zones
Large cookware can be heated with two cooking zones simultaneously.
Either the two cooking zones on the left-hand side or on the right-
hand side of the cooking surface are suitable for this.
1.Place cookware centrally on the two zones.
The cookware must cover at least the middle of the two crosses.
2.Set the same heat setting for the two cooking zones (max. setting 8).
3 With different cookware there can be differences in the heat distribu-
tion. Good cooking results can be achieved with cookware with thick,
flat bottoms.
Safety cut-out
Cooking surface
• If after switching on the cooking surface, a heat setting is not set for
a cooking zone within approx. 10 seconds, the cooking surface auto-
matically switches itself off.
• If one or more sensor fields are covered by objects (a pan, cloths, etc.)
for longer than approx. 10 seconds, a signal sounds and the cooking
surface switches off automatically.
• If all cooking zones are switched off, the cooking surface automati-
cally switches itself off after approx. 10 seconds.
Control panel
• When the appliance is switched off, if one or more of the sensor
fields on the control panel are covered for more that 10 seconds, an
acoustic signal sounds. The acoustic signal switches itself off auto-
matically when the sensor fields are no longer covered.
18
Induction cooking zones
• In the event of overheating (e.g. when a pan boils dry) the cooking
zone automatically switches itself off. _ is displayed. Before being
used again, the cooking zone must be set to 0and allowed to cool
down.
• If cookware that is not suitable is used, f flashes in the display and
after 2 minutes the display for the cooking zone switches itself off.
• If one of the cooking zones is not switched off after a certain time, or
if the heat setting is not modified, the relevant cooking zone switches
off automatically. _ is displayed. Before being used again, the cook-
ing zone must be set to 0.
Heat setting
v, 1 - 2
3 - 4
Switches off after
6 hours
5 hours
5
4 hours
6 - 9
1.5 hours
19
Tips on cooking and frying
3 Information about acrylamides
According to the latest scientific research, intensive browning of food,
especially in products containing starch, may present a health risk due
to acrylamide. Therefore we recommend cooking at low temperatures
and not browning foods too much.
20
Cookware for induction cooking zones
Cookware material
Cookware material
Suitable
Steel, enamelled steel
Cast iron
yes
yes
Stainless steel
if appropriately labelled by the manufacturer
Aluminium, copper, brass
Glass, ceramic, porcelain
---
---
3 Cookware for induction cooking zones is labelled as suitable by the
manufacturer.
Suitability test
Cookware is suitable for induction cooking, if …
• ... a little water on an induction cooking zone set to heat setting 9 is
heated within a short time.
• ... a magnet sticks to the bottom of the cookware.
3 Certain cookware can make noises when being used on induction cook-
ing zones. These noises are not a fault in the appliance and do not af-
fect operation in any way.
Bottom of the cookware
The bottom of the cookware should be as thick and flat as possible.
Pan size
Induction cooking zones adapt automatically to the size of the bottom
of the cookware up to a certain limit. However the magnetic part of
the bottom of the cookware must have a minimum diameter depending
upon the size of the cooking zone.
Cookware with a bottom with a diameter of less than 12cm is not suit-
able.
Tips on energy saving
2 Place cookware on the cooking zone before it is switched on.
2 If possible, always place a lid on the cookware.
21
Examples of cooking applications
The information given in the following table is for guidance only.
Heat
set-
ting
Cooking
process
suitable for
Cook time
Tips/Hints
0
Off position
Keeping
food
warm
Keeping cooked foods
warm
V
as required
Cover
Hollandaise sauce,
Melting melting butter, chocolate, 5-25 mins.
Stir occasionally
Cook with lid on
gelatine
1-2
Solidify-
ing
Fluffy omelettes, baked
eggs
10-40 mins.
25-50 mins.
Simmering rice and milk-
based dishes
Heating up ready-cooked
meals
Add at least twice as
much liquid as rice, stir
milk dishes part way
through cooking
Simmer-
ing
2-3
3-4
With vegetables add
20-45 mins. only a little liquid (a
few tablespoons)
Steaming Steaming vegetables, fish
Braising
Braising meat
Use only a little liquid,
20-60 mins. e. g.: max. ¼ l water
for 750 g of potatoes
Steaming potatoes
4-5
Boiling
Cooking larger quantities
of food, stews and soups
60-150
mins.
Up to 3 l liquid plus in-
gredients
Frying escalope, veal cor-
don bleu, cutlets, rissoles,
sausages, liver, roux, eggs,
pancakes, doughnuts
Gentle
frying
Turn halfway through
cooking
6-7
7-8
9
as required
Hash browns, loin steaks,
steaks, Flädle (pancakes
for garnishing soup)
Heavy
frying
5-15 mins. Turn halfway through
per pan cooking
Boiling
Searing
Deep fry-
ing
Boiling large quantities of water, cooking pasta, searing meat
(goulash, pot roast), deep frying chips
The power function is suitable for heating large quantities of liquid.
22
Cleaning and care
1 Take care! Risk of burns from residual heat.
1 Important Sharp objects and abrasive cleaning materials will damage
the appliance. Clean with water and washing up liquid.
1 Important Residues from cleaning agents will damage the appliance.
Remove residues with water and washing up liquid.
Cleaning the appliance after each use
1.Wipe the appliance with a damp cloth and a little washing up liquid.
2.Rub the appliance dry using a clean cloth.
Removing deposits
1.Place the scraper on the glass ceramic surface at an angle.
2.Remove residues by sliding the blade over the surface.
3.Wipe the appliance with a damp cloth and a little washing up liquid.
4.Rub the appliance dry using a clean cloth.
Remove
imme- when the appliance has
Type of dirt
using
diately
cooled down
sugar, food containing sugar
plastics, tin foil
yes
yes
---
---
---
---
---
yes
yes
yes
a scraper*
limescale and water rings
fat splashes
cleaner for glass ce-
ramic or stainless
steel*
shiny metallic discolouration
*Scrapers and cleaners for glass ceramic and stainless steel can be purchased in specialist shops,
supermarkets, the parts department of your local Service Force Centre or from
3 Remove stubborn residues with a cleaner for glass ceramic or stainless
steel.
3 Scratches or dark stains on the glass ceramic that cannot be removed
do not however affect the functioning of the appliance.
23
What to do if …
Problem
Possible cause
Remedy
The appliance cannot be
More than 10 seconds have Switch the appliance on
was switched on
switched on or is not oper- passed since the appliance again.
ating
The lock is switched on l Switch off the lock (See
the section “Locking/un-
locking the control panel”)
The child safety device is
switched on l
Deactivate child safety de-
vice (See the section “Child
safety device”)
Several sensor fields were Only touch one sensor field
touched at the same time
Safety cut-out has been
triggered
Remove any objects (pan,
cloths, etc.) that are lying
on the control panel.
Switch the appliance on
again
STOP+GO is activated u
Switching off STOP+GO
The residual heat indicator The cooking zone was only If the cooking zone is sup-
is not displaying anything on for a short time and is posed to be hot, call your
therefore not hot
local Service Force Centre.
The automatic warm up
function is not switching
itself on
There is still residual heat
Let the cooking zone cool
down
on the cooking zone h
The highest heat setting is The highest heat setting
set Ç
has the same power as the
automatic warm up func-
tion
Sensor fields are getting
hot
Cookware too big or placed Place cookware in the mid-
too near the controls
dle on one of the four
cooking zoznes. Place large
cookware on the back
cooking zones in prefer-
ence.
Repeated acoustic signal
One or more sensor fields Uncover sensor field
(6x), appliance switches off have been covered for
longer than 10 seconds
Acoustic signal sounds
The control panel is wholly Remove objects.
when appliance is switched or partly covered by ob-
off
jects.
24
Problem
Possible cause
Remedy
Acoustic signal sounds and The On/Off sensor field has Do not place any objects
appliance switches itself on been covered up, e.g. by a on the control panel
and then off again; after 5 cloth
seconds another acoustic
signal sounds
Display changes between
two heat settings
Power Management is re- See the section “ Switching
ducing the power of this
cooking zone
the power function on and
off”
Power Management is ac- Use cooking zones on other
tive, maximum load per
side reached
side
f flashes
Unsuitable cookware
Use suitable cookware
No cookware on the cook- Put cookware on zone
ing zone
Diameter of the base of the Use suitable cookware
cookware is too small for
the cooking zone
(min. 120 mm)
Cookware not completely Place cookware centrally
covering cross over the cross
_ is lit
Overheating protection for Switch off the cooking
the cooking zone has been zone. Switch the cooking
triggered
zone on again
Safety cut-out has been
triggered
Switch off the cooking
zone. Switch the cooking
zone on again
e and number are dis-
played
Electronics fault
Disconnect the appliance
from the electrical supply
for a few minutes (Take the
fuse out of the house’s wir-
ing system)
If after switching on again,
e is displayed again, call
the customer service de-
partment
If you are unable to remedy the problem by following the above
suggestions, please contact your local Service Force Centre.
1 Warning! Repairs to the appliance are only to be carried out by quali-
fied service engineers. Considerable danger to the user may result from
improper repairs.
3 If the appliance has been operated incorrectly, the visit from the service
technician or dealer may not take place free of charge, even during the
warranty period.
25
Disposal
2 Packaging material
The packaging materials are environmentally friendly and can be recy-
cled. The plastic components are identified by markings, e.g. >PE<,
>PS<, etc. Please dispose of the packaging materials in the appropriate
container at your local waste disposal facilities.
2 Old appliance
The symbol W on the product or on its packaging indicates that this
product may not be treated as household waste. Instead it shall be
handed over to the applicable collection point for the recycling of elec-
trical and electronic equipment. By ensuring this product is disposed of
correctly, you will help prevent potential negative consequences for the
environment and human health, which could otherwise be caused by
inappropriate waste handling of this product. For more detailed infor-
mation about recycling of this product, please contact your local city
office, your household waste disposal service or the shop where you
purchased the product.
26
Installation Instructions
Safety instructions
The laws, ordinances, directives and standards in force in the country of
use are to be followed (safety regulations, proper recycling in accord-
ance with the regulations, etc.)
Installation may only be carried out by a qualified electrician.
The minimum distances to other appliances and units are to be ob-
served.
Anti-shock protection must be provided by the installation, for example
drawers may only be installed with a protective floor directly under-
neath the appliance.
The cut surfaces of the worktop are to be protected against moisture
using a suitable sealant.
The sealant seals the appliance to the work top with no gap.
When building in, protect the underside of the appliance from steam
and moisture, e.g. from a dishwasher or oven.
Avoid installing the appliance next to doors and under windows. Other-
wise hot cookware may be knocked off the rings when doors and win-
dows are opened.
1 WARNING!
Risk of injury from electrical current.
• The electrical mains terminal is live.
• Observe connection schematic.
• Observe electrical safety rules.
• Ensure anti-shock protection through correct installation by a quali-
fied electrician.
• The appliance must be connected to the electrical supply by a quali-
fied electrician.
1 IMPORTANT!
Risk of injury from electrical current.
Loose and inappropriate plug and socket connections can make the ter-
minal overheat.
• Have the clamping joints correctly installed by a qualified electrician.
• Use strain relief clamp on cable.
• In the event of single-phase or two-phase connection, the appropri-
ate mains cable of type H05BB-F Tmax 90°C (or higher) must be used.
• If this appliance’s mains cable is damaged, it must be replaced by a
special cable (type H05BB-F Tmax 90°C; or higher). Please contact
your local Service Force Center for further advice.
27
A device must be provided in the electrical installation which allows the
appliance to be disconnected from the mains at all poles with a contact
opening width of at least 3 mm
Suitable isolation devices include line protecting cut-outs, fuses (screw
type fuses are to be removed from the holder), earth leakage trips and
contactors.
Sticking on the seal
• Clean the worktop in the area of the cut-out section.
• Stick the one-sided self-adhesive sealing tape supplied all the way
round the lower edge of the cooking surface along the outer edge of
the glass ceramic panel. Do not stretch it. The cut ends should lie in
the middle of one side. When you have cut it to length (add a few
mm), press the two ends flush up against one another.
28
Assembly
29
30
31
Rating Plate
78001KF-N
55GDDD4AG
949 592 510
Induction 7,4 kW
2,2 kW
230 V
50 Hz
AEG-ELECTROLUX
32
Warranty conditions
Great Britain
Standard guarantee conditions
We, AEG, undertake that if within 12 months of the date of the purchase this AEG appliance or
any part thereof is proved to be defective by reason only of faulty workmanship or materials, we
will, at our discretion repair or replace the same FREE OF CHARGE for labour, materials or carriage
on condition that:
• The appliance has been correctly installed and used only on the electricity or gas supply stated
on the rating plate.
• The appliance has been used for normal domestic purposes only, and in accordance with the
manufacturer's operating and maintenance instructions.
• The appliance has not been serviced, maintained, repaired, taken apart or tampered with by any
person not authorised by us.
• All service work under this guarantee must be undertaken by a Service Force Centre. Any appli-
ance or defective part replaced shall become the Company's property.
• This guarantee is in addition to your statutory and other legal rights.
• Home visits are made between 8.30am and 5.30pm Monday to Friday. Visits may be available
outside these hours in which case a premium will be charged.
Exclusions
This guarantee does not cover:
• Damage or calls resulting from transportation, improper use or neglect, the replacement of any
light bulbs or removable parts of glass or plastic.
• Costs incurred for calls to put right an appliance which is improperly installed or calls to appli-
ances outside the United Kingdom.
• Appliances found to be in use within a commercial environment, plus those which are subject
to rental agreements.
• Products of AEG manufacture which are not marketed by AEG.
European Guarantee
If you should move to another country within Europe then your guarantee moves with you to
your new home subject to the following qualifications:
• The guarantee starts from the date you first purchased your product.
• The guarantee is for the same period and to the same extent for labour and parts as exists in
the new country of use for this brand or range of products.
• This guarantee relates to you and cannot be transferred to another user.
• Your new home is within the European Community (EC) or European Free Trade Area.
• The product is installed and used in accordance with our instructions and is only used domesti-
cally, i.e. a normal household.
• The product is installed taking into account regulations in your new country.
Before you move please contact your nearest Customer Care centre, listed below, to give them de-
tails of your new home. They will then ensure that the local Service Organisation is aware of your
move and able to look after you and your appliances.
France
Germany
Italy
Sweden
UK
Senlis
+33 (0) 3 44 62 29 29
+49 (0) 800 234 7378
+39 (0) 800 117511
+46 (0) 8 672 5360
+44 (0) 8705 350 350
Nürnberg
Pordenone
Stockholm
Luton
33
Service and Spare Parts
If the event of your appliance requiring service, or if you wish to pur-
chase spare parts, please contact Service Force by telephoning:
0870 5 929 929
Your telephone call will be automatically routed to the Service Force
Centre covering your post code area.
For the address of your local Service Force Centre and further informa-
tion about Service Force, please visit the website at
Before calling out an engineer, please ensure you have read the details
under the heading „What to do if...“
When you contact the Service Force Centre you will need to give the
following details:
1. Your name, address and post code.
2. Your telephone number.
3. Clear and concise details of the fault.
4. The model and serial number of the appliance (found on the rating
plate)
5. The purchase date.
Please note that a valid purchase re-
ceipt or guarantee documentation is
required for in-guarantee service
calls.
Customer Care
For general enquiries concerning
your AEG appliance, or for further
information on AEG products please
contact our Customer Care Depart-
ment by letter or telephone at the
address below or visit our website at www.aeg.co.uk.
Customer Care Department For Customer Service in the Republic
Major Appliances
AEG Domestic Appliances
Addington Way
of Ireland please contact us at the ad-
dress below:
AEG/ Electrolux Group (Ire) Ltd
Long Mile Road/ Dublin 12
Republic of Ireland
Tel: +353 (0) 1 4090754
Email: [email protected]
Luton
Bedfordshire, LU4 9QQ
Tel: 08705 350350 (*)
(*) Calls may be recorded for training purposes
34
35
822 930 186-B-061206-03
Subject to change without notice
|