Eizo LA 120 D User Manual

Thank you very much for choosing the EIZO product.  
Please read this User’s Manual carefully to familiarize yourself with safe and effective usage procedures.  
Please retain this manual for future reference.  
[Location of the Caution Statements]  
PRECAUTIONS  
zTo ensure personal safety and proper maintenance, please read this  
section and the caution statements on the unit.  
WARNING  
zAttach the arm to the LCD monitor that weights between 2.5 kg and 5.5 kg.  
Not doing so may cause the arm or monitor to fall, which may result in injury or  
equipment damage.  
zAffix the arm securely on the base.  
Not doing so may cause the monitor to fall and result in injury or equipment damage.  
zAffix the arm on an appropriate base.  
Do not affix the arm on such a base as shown below or on a weak base which cannot  
support the monitor or arm. Affixing the arm on these bases may cause the monitor to  
fall and result in injury.  
Not hooking enough  
On tapered desk  
On Pole  
On Wall  
zClamp the screws of the arm tightly.  
If the arm becomes unstable, clamp the hex-head screws of the arm securely again.  
Loose clamping may cause the monitor to fall and result in injury or equipment damage.  
zDo not hang from or lean on the arm.  
Doing so may cause the monitor to tumble or fall and result in injury or equipment  
damage.  
zWhen moving the arm, be sure not to pinch a finger between the moving parts.  
zWhen rotating the monitor for portrait display, make a space enough between a  
desk and a monitor not to pinch a finger.  
zDo not disassemble.  
The spring mechanism inside of the stand may result in injury or equipment damage  
when disassembling.  
zAttach the arm with another person.  
Do not attach it alone. Doing so may result in injury or equipment damage.  
3. Attach the monitor to the arm.  
Use specified screws for tightening up between arm, fitting and monitor referring to the back of this  
manual.  
<The monitor employing 75 mm x 75 mm arm mounting holes>  
(1) Attach the arm to the monitor with specific screws (M4 x 8 (black) or M4 x 12 (silver/long),  
4 points).  
(2) Put in the covers to the shield plate with sliding them rightward or leftward.  
(1)  
(2)  
NOTE  
zAdjust the angle of the monitor to face upward slightly so that the cover can be mounted easily.  
<The monitor employing 100 mm x 100 mm arm mounting holes>  
(1) Mount the fitting on the rear of monitor with specific screws (M4 x 8 (black) or M4 x 12  
(silver/long), 4 points).  
(2) Hook the monitor with fitting of to the arm.  
(3) Attach the arm to the monitor with fitting by using screws (M4 x 8 (silver/short), 4 points).  
(4) Put in the covers to the shield plate with sliding them rightward or leftward.  
(2)  
(1)  
(3)(4)  
NOTE  
zAdjust the angle of the monitor to face upward slightly so that the cover can be mounted easily.  
4. Lead the power cord and signal cable into the cable holder at inner side of the arm.  
[LA-130-D]  
[LA-120-D]  
Cable Holder  
Cable Holder  
NOTE  
zThe number of cable holder may differ from each model.  
zThe cables are recommended to lead with slight sag for the smooth motion of the monitor for  
portrait display.  
____________________________________  
Specifications  
LA-130-D  
Dimension  
130 (5.1) x 303.8 ~ 466.1 (12.0 ~ 18.4) x 275.6 ~ 495.8 (10.9 ~ 19.5) mm (inch)  
2.8 kg / 6.2 lbs  
(W) x (H) x (D)  
Weight  
Dimensions  
Unit: mm (inch)  
Top  
Side  
Front  
LA-120-D  
Dimension  
130 (5.1) x 259.2 ~ 421.5 (10.2 ~ 16.6) x 130.6 ~ 350.8 (5.1 ~ 13.8) mm (inch)  
2.5 kg / 5.5 lbs  
(W) x (H) x (D)  
Weight  
Dimensions  
Unit: mm (inch)  
Top  
Side  
Front  
NOTE  
zThe value within the dimensions drawing is only for reference, and range of motion may differ  
according to the installed condition.  
LIMITED WARRANTY  
EIZO NANAO CORPORATION (“EIZO”) and EIZO’s authorized distributors warrant to the original  
purchaser that this product shall be free from defects in material and workmanship for a period of one (1) year  
from the date of purchase. The service parts stock for the product shall be maintained for five (5) years after  
the production is discontinued. This warranty is valid only in the countries where EIZO’s authorized  
distributors are located.  
In the event of malfunction of the product during the warranty period attributable directly to defective material  
and/or workmanship, EIZO and EIZO’s authorized distributors will, at their option, either repair or replace the  
defective product. EIZO and EIZO’s authorized distributors shall have no obligation under this warranty,  
however, in the following cases:  
(a) Any defect of the product caused by freight damage, modification, alteration, abuse, misuse, accident,  
incorrect installation, disaster, faulty maintenance or improper repair by third party other than EIZO  
and EIZO’s authorized distributors.  
(b) Any incompatibility of the product due to possible technical innovations or regulations.  
(c) Any deformation, discoloration, warp, loss of brightness or focus, or whatsoever due to normal  
deterioration of the product.  
(d) Any defect of the product caused by external equipment.  
(e) Any defect of the product on which the original serial number has been altered or removed.  
(f) Any exchange of products due to the normal depletion of consumables such as batteries.  
To obtain service under this warranty, the original purchaser must deliver the product, freight prepaid,in its  
original package or other adequate package affording an equal degree of protection, assuming the risk of  
damage and/or loss in transit, to your local EIZO authorized distributor. The original purchaser must present  
proof of purchase establishing the date of purchase of the product when requesting warranty service.  
Warranty period for any replaced and/or repaired product under this warranty shall expire at the end of the  
original warranty period.  
EIZO OR EIZO’S AUTHORIZED DISTRIBUTORS ARE NOT RESPONSIBLE FOR ANY DAMAGE TO,  
OR LOSS OF, DATA OR OTHER INFORMATION STORED IN ANY MEDIA OR ANY PART OF ANY  
PRODUCT RETURNED TO EIZO OR EIZO’S AUTHORIZED DISTRIBUTORS FOR REPAIR.  
EIZO AND EIZO’S AUTHORIZED DISTRIBUTORS MAKE NO FURTHER WARRANTIES, EXPRESS OR  
IMPLIED, WITH RESPECT TO THE PRODUCT AND ITS QUALITY, PERFORMANCE,  
MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR USE. IN NO EVENT SHALL EIZO OR  
EIZO’S AUTHORIZED DISTRIBUTORS BE LIABLE FOR ANY INCIDENTAL, INDIRECT, SPECIAL,  
CONSEQUENTIAL OR OTHER DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION,  
DAMAGES FOR LOSS OF PROFIT, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION,  
OR ANY OTHER PECUNIARY LOSS) ARISING OUT OF THE USE OR INABILITY TO USE THE  
PRODUCT OR IN ANY CONNECTION WITH THE PRODUCTS, WHETHER BASED ON CONTRACT,  
TORT, NEGLIGENCE, STRICT LIABILITY OR OTHERWISE, EVEN IF EIZO OR EIZO’S AUTHORIZED  
DISTRIBUTORS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.  
THIS  
EXCLUSION ALSO INCLUDES ANY LIABILITY WHICH MAY ARISE OUT OF THIRD PARTY CLAIMS  
AGAINST THE ORIGINAL PURCHASER. THE ESSENCE OF THE PROVISION IS TO LIMIT THE  
POTENTIAL LIABILITY OF EIZO AND EIZO’S AUTHORIZED DISTRIBUTERS ARISING OUT OF THIS  
LIMITED WARRANTY AND/OR SALES.  
Recycle Auskunft  
Die Rücknahme dieses Produktes nach Nutzungsende übernimmt EIZO in Deutschland  
zusammen mit dem Partner eds-r gmbh rücknahmesysteme. Dort werden die Geräte in ihre  
Bestandteile zerlegt, die dann der Wiederverwertung zugeführt werden. Um einen Abholtermin  
zu vereinbaren und die aktuellen Kosten zu erfahren, benutzen Sie bitte folgende Rufnummer:  
02153-73 35 00. Weitere Informationen finden Sie auch unter der Internet-Adresse:  
Recycling Information for customers in Switzerland:  
All recycling information is placed in the SWICO’s website.  
Recycling-Information für Kunden in der Schweiz:  
Alle Informationen zum Thema Recycling finden Sie auf der Homepage des Brancheverbandes  
SWICO.  
Renseignements de recyclage pour les clients en Suisse:  
Vous trouvez tous les renseignements pour le sujet de recyclage sur la page WEB de I’UNION DE  
BRAN CHE SWICO.  
Recycling Information for customers in USA:  
All recycling information is placed in the EIZO Nanao Technologies, Inc’s website.  
Återvinnings information för kunder i Sverige:  
All information om återvinning finns på Eizo Europe AB:s hemsida:  

HP Hewlett Packard Hewlett Packard Computer Hardware J9051A User Manual
Hotpoint BE11 User Manual
Hama RDR HX900 User Manual
GE Profile JP938CCCC User Manual
GE 25202 User Manual
Cypress CY7C1512JV18 User Manual
AT T CL83351 User Manual
Asus P5RD2 VM User Manual
Albatron Technology DM 5952KF User Manual
Acer AL1721 User Manual