Multimedia Projector
MODEL
Network Supported
□ Wireless LAN
LC-XB33N
IEEE802.11b/g
□
Wired LAN
100-Base-TX/10-Base-T
Memory Viewer
□ SD Card Memory Viewer
Refer to the owner’s manuals below for details
*
about network and memory viewer function.
■ Network Set-up and Operation
■ Memory viewer
Owner's Manual
Features and Design
This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of use.
This projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display
(LCD) technology.
◆ Compact Design
◆ Multilanguage Menu Display
This projector is designed compact in size and weight.
It is easy to carry and installed anywhere you wish to
use.
Operation menu is available in 16 languages; English,
German, French, Italian, Spanish, Portuguese, Dutch,
Swedish, Finnish, Polish, Hungarian, Romanian,
Russian, Chinese, Korean, and Japanese (p.46).
◆ Security Function
◆ Simple Computer System Setting
The Security function helps you to ensure security
of the projector. With the Key lock function, you can
lock the operation on the top control or remote control
(p.53). PIN code lock function prevents unauthorized
use of the projector (pp.21, 53–54).
The projector has the Multi-scan system to conform to
almost all computer output signals quickly (p.31). Up to
UXGA resolution can be accepted.
◆ Useful Functions for Presentations
◆
Helpful Maintenance Functions
- The digital zoom function allows you to focus on the
crucial information during a presentation (p.38).
Lamp and filter maintenance functions provide for
better and proper maintenance of the projector.
- Blackboards* can be used as a projection screen.
*The board color is limited to Green (pp.35, 42).
◆ LAN Network Function
This projector is loaded with the Wired and Wireless
LAN network function. You can project an image on a
computer as well as operate and manage the projector
via network. For details, refer to the owner’s manual
“Network Set-up and Operation.”
◆
Power Management
The Power management function reduces power
consumption and maintains the lamp life (p.51).
◆ Memory Viewer Function
Insert the dedicated SD card memory into the
projector to project images or presentation data stored
within. You do not have to carry computers or other
equipment for a presentation.
◆ Lamp Control
Brightness of the projection lamp can be selected
(pp.27, 52).
*SD card memory is not supplied with the projector.
For details, refer to the owner’s manual of Memory
viewer.
◆ Quick Termination
The AC power cord can be unplugged immediately
after turning off the projector without waiting for the
termination of the cooling fan rotation (p.22).
◆ Input Search Function
Input signal can be searched automatically. (p.50)
◆ Logo Function
The Logo function allows you to customize the screen
logo (pp.48–49). You can capture an image for the
screen logo and use it for the starting-up display or
between presentations.
Notes:
• The On-Screen Menu and figures in this manual may differ slightly from the product.
• The contents of this manual are subject to change without notice.
3
Table of Contents
Input Source Selection
Features and Design 3
Table of Contents ꢁ
To the Owner 5
Safety Instructions 6
(RGB(PC digital), RGB(AV HDCP))
Computer System Selection
Auto PC Adjustment
30
31
32
33
35
36
37
38
Manual PC Adjustment
Air Circulation
7
7
7
Image Mode Selection
Installing the Projector in Proper Directions
Moving the Projector
Image Adjustment
Screen Size Adjustment
For zooming in and out the images
Compliance 8
Part Names and Functions 9
Video Input 39
Front
9
9
Input Source Selection (Video, S-video)
Input Source Selection
39
Back
Bottom
9
(Component, RGB Scart 21-pin)
Video System Selection
Image Mode Selection
40
41
42
43
45
Rear Terminal
10
11
12
13
13
14
14
15
15
15
Top Control
Remote Control
Image Adjustment
Laser Pointer Function
Pointer Function
Wireless Mouse Operation
Remote Control Code
Remote Control Battery Installation
Remote Control Operating Range
Adjustable Feet
Screen Size Adjustment
Setting ꢁ6
Setting
46
Maintenance and Cleaning 57
WARNING TEMP. indicator
Cleaning the Filter
57
58
58
59
59
59
60
61
Resetting the Filter Counter
Attaching the Lens Cap
Cleaning the Projection Lens
Cleaning the Projector Cabinet
Lamp Replacement
Installation 16
Positioning the Projector
16
17
18
19
Connecting the AC Power Cord
Connecting to a Computer
Connecting to Video Equipment
Resetting the Lamp Counter
Connecting to Component Video Equipment 20
Appendix 6ꢀ
Basic Operation ꢀ1
Troubleshooting
62
66
68
69
71
72
73
74
75
76
Turning On the Projector
Turning Off the Projector
How to Operate the On-Screen Menu
Menu Bar
21
22
23
24
25
25
25
26
27
Menu Tree
Indicators and Projector Condition
Compatible Computer Specifications
Technical Specifications
Optional Parts
Zoom and Focus Adjustment
Auto Setup Function
PJ Link Notice
Keystone Correction
Configurations of Terminals
PIN Code Number Memo
Dimensions
Sound Adjustment
Remote Control Operation
Computer Input ꢀ9
Input Source Selection
(RGB: Computer 1 (Analog)/Computer 2 )
29
Trademarks
Each name of corporations or products in this book is either a registered trademark or a trademark of its respective
corporation.
ꢁ
To the Owner
Safety Precaution
wARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE
Before installing and operating this projector, read this
manual thoroughly.
This projector provides many convenient features and
functions. Operating the projector properly enables
you to manage those features and maintains it in good
condition for many years to come.
Improper operation may result in not only shortening the
product-life, but also malfunctions, fire hazard, or other
accidents.
If your projector seems to operate improperly, read this
manual again, check operations and cable connections
and try the solutions in the “Troubleshooting” section
in the back of this booklet. If the problem still persists,
contact the dealer where you purchased the projector or
the service center.
–This projector produces intense light from the projection
lens. Do not stare directly into the lens, otherwise eye
damage could result. Be especially careful that children
do not stare directly into the beam.
–Install the projector in a proper position. Otherwise it may
result in fire hazard.
–Allowing the proper amount of space on the top, sides,
and rear of the projector cabinet is critical for proper
air circulation and cooling of the unit. The dimension
shown here indicate the minimum space required.
If the projector is to be built into a compartment or
similarly enclosed, these minimum distances must be
maintained.
CAUTION
SIDE and TOP
REAR
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK) NO USER-SERVICEABLE PARTS
INSIDE EXCEPT LAMP REPLACEMENT
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL
–Do not cover the ventilation slot on the projector. Heat
build-up can reduce the service life of your projector,
and can also be dangerous.
–If the projector is unused for an extended time, unplug
the projector from the power outlet.
THIS SYMBOL INDICATES THAT DANGEROUS
VOLTAGE CONSTITUTING A RISK OF ELECTRIC
SHOCK IS PRESENT WITHIN THIS UNIT.
THIS SYMBOL INDICATES THAT THERE ARE
IMPORTANT OPERATING AND MAINTENANCE
INSTRUCTIONS IN THE OWNER'S MANUAL
WITH THIS UNIT.
CAUTION
DO NOT SET THE PROjECTOR IN GREASy, wET, OR SMOKy
CONDITIONS SUCH AS IN A KITCHEN TO PREVENT A
BREAKDOwN OR A DISASTER IF THE PROjECTOR COMES
IN CONTACT wITH OIL OR CHEMICALS, IT MAy BECOME
DETERIORATED
NOTE: This symbol and recycle system are applied
to EU countries only and not applied to the
countries in the other area of the world.
Your EIKI product is designed and
manufactured with high quality materials
and components which can be recycled
and reused.
CAUTION
Not for use in a computer room as defined in the
Standard for the Protection of Electronic Computer/Data
Processing Equipment, ANSI/NFPA 75.
This symbol means that electrical and
electronic equipment, at their end-of-life,
should be disposed of separately from
your household waste.
Ne peut être utilisé dans une salle d’ordinateurs telle
que définie dans la norme ANSI/NFPA 75 Standard
for Protection of Electronic Computer/Data Processing
Equipment.
Please dispose of this equipment at your local
community waste collection/recycling centre. In the
European Union there are separate collection systems
for used electrical and electronic products.
Please help us to conserve the environment we live in!
READ AND KEEP THIS OwNER'S MANUAL FOR
LATER USE
5
Safety Instructions
All the safety and operating instructions should be read Do not install the projector near the ventilation duct of air-
before the product is operated.
conditioning equipment.
Read all of the instructions given here and retain them This projector should be operated only from the type
for later use. Unplug this projector from AC power supply of power source indicated on the marking label. If you
before cleaning. Do not use liquid or aerosol cleaners. are not sure of the type of power supplied, consult your
Use a damp cloth for cleaning.
authorized dealer or local power company.
Follow all warnings and instructions marked on the Do not overload wall outlets and extension cords as this
projector.
can result in fire or electric shock. Do not allow anything to
rest on the power cord. Do not locate this projector where
For added protection to the projector during a lightning the cord may be damaged by persons walking on it.
storm, or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet. This will Do not attempt to service this projector yourself as
prevent damage due to lightning and power line surges.
opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing to
qualified service personnel.
Do not expose this unit to rain or use near water... for
example, in a wet basement, near a swimming pool, etc... Unplug this projector from wall outlet and refer servicing to
qualified service personnel under the following conditions:
Do not use attachments not recommended by the a. When the power cord or plug is damaged or frayed.
manufacturer as they may cause hazards.
b. If liquid has been spilled into the projector.
c. If the projector has been exposed to rain or water.
Do not place this projector on an unstable cart, stand, d. If the projector does not operate normally by following
or table. The projector may fall, causing serious injury
to a child or adult, and serious damage to the projector.
Use only with a cart or stand recommended by the
manufacturer, or sold with the projector. Wall or shelf
mounting should follow the manufacturer’s instructions,
and should use a mounting kit approved by the
manufacturers.
the operating instructions. Adjust only those controls
that are covered by the operating instructions as
improper adjustment of other controls may result in
damage and will often require extensive work by a
qualified technician to restore the projector to normal
operation.
e. If the projector has been dropped or the cabinet has
been damaged.
An appliance and cart combination
should be moved with care. Quick
stops, excessive force, and uneven
surfaces may cause the appliance
and cart combination to overturn.
f . When the projector exhibits a distinct change in
performance-this indicates a need for service.
When replacement parts are required, be sure the service
technician has used replacement parts specified by the
manufacturer that have the same characteristics as the
original part. Unauthorized substitutions may result in fire,
Slots and openings in the back and bottom of the cabinet electric shock, or injury to persons.
are provided for ventilation, to ensure reliable operation of
the equipment and to protect it from overheating.
Upon completion of any service or repairs to this projector,
ask the service technician to perform routine safety
The openings should never be covered with cloth or other checks to determine that the projector is in safe operating
materials, and the bottom opening should not be blocked condition.
by placing the projector on a bed, sofa, rug, or other
similar surface. This projector should never be placed
near or over a radiator or heat register.
This projector should not be placed in a built-in installation
such as a book case unless proper ventilation is provided.
Never push objects of any kind into this projector through
cabinet slots as they may touch dangerous voltage points
or short out parts that could result in a fire or electric
shock. Never spill liquid of any kind on the projector.
6
Safety Instructions
Installing the Projector in Proper Position
Air Circulation
Openings in the cabinet are provided for ventilation. To
ensure reliable operation of the product and to protect it
from overheating, these openings must not be blocked
or covered.
Install the projector properly. Improper Installation may
reduce the lamp life and cause a fire hazard.
Do not tilt the projector more than 20
degrees from side to side.
CAUTION
Hot air is exhausted from the exhaust vent. When using
or installing the projector, the following precautions
should be taken.
Do not point the projector up to project an
image.
– Do not put any flammable object or spray can near the
projector, hot air is exhausted from the air vents.
– Keep the exhaust vent at least 3’ (1 m) away from any
objects.
Do not point the projector down to project
an image.
Do not put the projector on either side to
project an image.
– Do not touch a peripheral part of the exhaust vent,
especially screws and metallic parts. These areas will
become hot while the projector is being used.
– Do not put anything on the cabinet. Objects put on the
cabinet will not only get damaged but also may cause
fire hazard by heat.
Moving the Projector
Cooling fans are provided to cool down the projector.
The fans’ running speed is changed according to the
temperature inside the projector.
When moving the projector, replace the lens cap and
retract adjustable feet to prevent damage to the lens and
cabinet.
When the projector is not in use for an extended period,
put it into a suitable case with the lens side up.
CAUTION IN CARRyING OR TRANSPORTING
THE PROjECTOR
Air intake Vent
– Do not drop or bump the projector, otherwise damages
or malfunctions may result.
–When carrying the projector, use a suitable carrying case.
–Do not transport the projector by courier or any other
transport service in an unsuitable transport case. This
may cause damage to the projector. For information
about transporting the projector by courier or any other
transport service, consult your dealer.
–Do not put the projector in a case before the projector is
cooled enough.
Air Intake Vent
Exhaust Vent
(Hot air exhaust)
Air Intake
Vent
Exhaust Vent
(Hot air exhaust)
7
Compliance
Federal Communications Commission Notice
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy, and if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.
Use of shielded cable is required to comply with class B limits in Subpart B of Part 15 of FCC Rules.
Do not make any changes or modifications to the equipment unless otherwise specified in the instructions. If
such changes or modifications should be made, you could be required to stop operation of the equipment.
Model Number
Trade Name
: LC-XB33N
: EIKI
Responsible party
Address :
Telephone No. :
: EIKI International,Inc.
30251 Esperanza Santa Margaria CA 92688-2123
800-242-3454 (949-457-0200)
AC Power Cord Requirement
The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it.
AC Power Cord for the United States and Canada:
AC Power Cord used in the United States and Canada is listed by the Underwriters
Laboratories (UL) and certified by the Canadian Standard Association (CSA).
AC Power Cord has a grounding-type AC line plug. This is a safety feature to be sure that the
GROUND
plug will fit into the power outlet. Do not try to defeat this safety feature. Should you be unable
to insert the plug into the outlet, contact your electrician.
AC Power Cord for the United Kingdom:
This cord is already fitted with a moulded plug incorporating a fuse, the value of which is indicated on the pin
face of the plug. Should the fuse need to be replaced, an ASTA approved BS 1362 fuse must be used of the
ASA
same rating, marked thus . If the fuse cover is detachable, never use the plug with the cover omitted. If a
replacement fuse cover is required, ensure it is of the same colour as that visible on the pin face of the plug
(i.e. red or orange). Fuse covers are available from the Parts Department indicated in your User Instructions.
If the plug supplied is not suitable for your socket outlet, it should be cut off and destroyed.
The end of the flexible cord should be suitably prepared and the correct plug fitted.
wARNING : A PLUG wITH BARED FLEXIBLE CORD IS HAZARDOUS IF ENGAGED IN A LIVE SOCKET
OUTLET
The Wires in this mains lead are coloured in accordance with the following code:
Green-and-yellow Earth
Blue . . . . . . . . . . . Neutral
Brown . . . . . . . . . Live
As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings
identifying the terminals in your plug proceed as follows:
The wire which is coloured green-and-yellow must be connected to the terminal in the plug which is marked by
the letter E or by the safety earth symbol or coloured green or green-and-yellow.
The wire which is coloured blue must be connected to the terminal which is marked with the letter N or
coloured black.
The wire which is coloured brown must be connected to the terminal which is marked with the letter L or
coloured red.
wARNING: THIS APPARATUS MUST BE EARTHED
THE SOCKET-OUTLET SHOULD BE INSTALLED NEAR THE EQUIPMENT AND EASILy ACCESSIBLE
8
Part Names and Functions
① Infrared Remote Receiver
② Focus Ring
Front
③ Zoom Lever
④ Projection Lens
⑤ Lens Cap
(See page 59 for attaching.)
CAUTION
Do not turn on a projector with lens cap attached. High
temperature from light beam may damage lens cap and
result in fire hazard.
①
②③ ④ ⑤
⑥
⑥ Air Intake Vent
⑦ Exhaust Vents
CAUTION
Back
Hot air is exhausted from the exhaust vent. Do not put
heat-sensitive objects near this side.
⑦
⑧⑨ ⑩ ⑪⑫
⑬ ⑭
⑧ USB Terminal
⑨ Power Cord Connector
⑩ Speaker
⑪ Terminals and Connectors
⑫ Top Controls and Indicators
⑬ LAN Connection Terminal
⑭ SD CARD Terminal
⑮ Lamp Cover
⑯ Air Intake Vents (back and bottom)
⑰ Air Filters
⑥
⑱ Adjustable Feet
Bottom
⑮
⑯
⑰
⑱
Note:
LAN Connection Terminal and
are for the Network function. Refer to the owner’s manual
“Network Set-up and Operation” .
SD CARD Terminal
⑬
⑭
Kensington Security Slot
This slot is for a Kensington lock used to deter theft of
the projector.
*Kensington is a registered trademark of ACCO Brands
Corporation.
9
Part Names and Functions
Rear Terminal
①
②
③
④
⑤
⑥
⑦
⑧
⑫
⑪
⑩ ⑨
① USB
⑦ AUDIO OUT (VARIABLE)
In order to operate the computer with the remote
control and use the PAGE ▲▼buttons on the
remote control during a presentation, connect the
USB port of the computer to the USB terminal with a
USB cable (not supplied) (pp.12, 18).
Connect an external audio amplifier to this jack
(pp.18–20).
This terminal outputs sound from AUDIO IN
terminal (⑥ or ⑪).
⑧ LAN Connection Terminal
② SERVICE PORT
This jack is used to service the projector.
Connect the LAN cable (refer to the owner’s manual
“Network Set-up and Operation”).
③ COMPUTER IN 1/DVI-I
Connect computer output (Digital/Analog DVI-I
type) to this terminal (p.18).
⑨ SD Card Slot
Insert the SD card memory (not supplied) for
Memory viewer operation(refer to the owner's
manual of Memory viewer).
④ COMPUTER IN ꢀ/COMPONENT IN/ MONITOR
OUT
⑩ SD Card Indicator
Display the status of SD card. When inserting SD
This terminal is switchable and can be used for
input from a computer or output the incoming RGB
analog signal from COMPUTER IN1 terminal to the
other monitor.
Set the terminal up as either Computer input or
Monitor output properly. (Used for Monitor out,
this terminal outputs only incoming signal from
COMPUTER IN 1 terminal.) (pp18,20)
Card, the indicator lights, and when unplugging SD
Card, the indicator turns off.
⑪ COMPUTER/COMPONENT AUDIO IN
Connect the audio output (stereo) signal from a
computer or video equipment connected to ③ or ④
to this jack (pp.18, 20).
⑤ S-VIDEO IN
⑫ VIDEO IN
Connect the S-VIDEO output signal from video
equipment to this jack (p.19).
Connect the composite video output signal to this
jack (p.19).
⑥ AUDIO IN
Connect the audio output signal from video
equipment connected to ⑤ or ⑫ to this jack. For a
mono audio signal (a single audio jack), connect it
to the L (MONO) jack (p.19).
10
Part Names and Functions
Top Control
⑥
⑤
④
⑩
⑨
⑧
③
②
⑦
①
① SELECT button
⑤ LAMP REPLACE indicator
–Execute the selected item (p.23).
–Expand or compress the image in the Digital zoom
mode (p.38).
Lights yellow when the projection lamp reaches its
end of life (pp.60,68).
⑥ wIRELESS indicator
② POINT ▲▼◄► (VOLUME +/–) buttons
Turn green when the projector is in the network
mode.
–Select an item or adjust the value in the On-Screen
Menu (p.23).
–Pan the image in the Digital zoom + mode (p.38).
–Adjust the volume level (Point ◄► buttons) (p.26).
⑦ MENU button
Open or close the On-Screen Menu (p.23).
⑧ INPUT button
③ AUTO SETUP/CANCEL button
Select an input source (pp.29–30, 39–40).
–Correct vertical keystone distortion and adjust
computer display parameters such as Fine sync.,
Total dots, and Picture position (pp.25, 46).
–Display the image in SD card or return to the
menu bar in Memory Viewer menu.
Refer to the owner's manual of "Network Set-up
and Operation" and owner's manual of Memory
viewer.
⑨ ON/STAND–By button
Turn the projector on or off (pp.21–22).
⑩ wARNING TEMP indicator
–Lights red when the projector detects an abnormal
condition.
–Blinks red when the internal temperature of the
projector exceeds the operating range (pp.57,68).
④ POwER indicator
–Lights red when the projector is in stand-by mode.
–Lights green during operations.
–Blinks green in the Power management mode
(p.51).
11
Part Names and Functions
Remote Control
① L-CLICK button
Act as the left mouse button for wireless mouse operation. (p.14)
② POwER ON/STAND-By button
Turn the projector on or off. (pp.21-22)
③ SIGNAL EMISSION indicator
Lights red while the laser beam is being emitted from the laser light window or a
signal is being sent from the remote control to the projector.
①
④ LASER LIGHT window
A laser beam is emitted from here (p.13).
⑤ VIDEO button
Select the VIDEO input source. (p.39)
④
②
③
⑥ COMPUTER button
Select the COMPUTER input source. (pp.29-30,40)
⑦ AUTO PC button
Automatically adjust the computer image to its optimum setting. (pp.27,32,46)
⑧
⑤
⑥
KEySTONE button
Correct keystone distortion. (pp.25, 47)
+ / –
⑨ Point ▲▼◄► ( VOLUME
)
buttons
㉕
㉔
– Select an item or adjust the value in the On-Screen Menu. (p.23)
– Pan the image in the Digital zoom + mode. (p.38)
– Adjust the volume level. (Point◄►buttons) (p.26)
⑩ MENU button
⑦
⑧
Open or close the On-Screen Menu. (p.23)
⑪ FREEZE button
Freeze the picture on the screen. (p.27)
⑫ LASER button
⑨
– Operate the Laser pointer function. Laser beam is emitted while pressing this
button within 1 minute. When using this laser pointer for more than 1 minute,
release the LASER button and press it again. (p.13)
– Display the Pointer on the screen. (p.13)
㉓
㉒
⑬ PAGE ▲▼ buttons
Scroll back and forth the pages on the screen when giving a presentation. To use
these buttons, connect the projector and your computer with a USB cable. (pp.10,
18)
⑭ LAMP CONTROL button
⑩
㉑
⑳
⑲
Select a lamp mode. (pp.27, 52)
⑮ D ZOOM ▲▼ buttons
⑪
⑫
Zoom in and out the images. (pp.27, 38)
⑯ RESET/ON/ALL-OFF switch
When using the remote control, set this switch to “ON.” Set it to “ALL OFF” for
power saving when it is not used. Slide this switch to "RESET" to initialize the
remote control code or switch Spotlight and Pointer to the Laser pointer function.
(pp.13-14)
⑬
⑱
⑰
⑰ IMAGE button
⑭
⑮
Select the image mode. (pp.28,35,42)
⑱
MUTE button
Mute the sound. (p.26)
⑲
⑳
P-TIMER button
Operate the P-timer function. (p.28)
NO SHOw button
Temporarily turn off the image on the screen. (p.28)
㉑ R-CLICK button
⑯
Act as the right mouse button for wireless mouse operation. (p.14)
㉒ SELECT button
– Execute the selected item. (p.23)
– Expand or compress the image in Digital zoom mode. (p.38)
㉓ PRESENTATION POINTER button
Move a pointer of the projector or a pointer for wireless mouse operation. (pp.13-14)
㉔ AUTO SET/CANCEL button
Note:
To ensure safe operation, please observe the
following precautions:
– Correct vertical keystone distortion and adjust the PC display parameters. (pp.25, 46)
– Do not bend, drop, or expose the remote
control to moisture or heat.
– For cleaning, use a soft dry cloth. Do
not apply benzene, thinner, splay, or any
chemical material.
– Display the image in SD card or return to the menu bar in Memory Viewer menu.
Refer to the owner's manual of "Network Set-up and Operation" and owner's
manual of Memory viewer.
㉕ NETwORK button
Select the Network input. See owner's manual “Network Set-up and Operation” and
owner's manual of Memory viewer.
1ꢀ
Part Names and Functions
Laser Pointer Function
This remote control emits a laser beam from the laser light window. Press the LASER button to activate the
laser pointer. The signal emission indicator lights red and the red laser beam is emitted. If the LASER button is
pressed for more than one minute or if it is released, the laser light goes off.
The laser emitted is a Class II laser. Do not look into the laser light window or point the laser beam at yourself or
other people. The following is the caution label for the laser beam.
CAUTION: Use of controls, adjustments or performance of procedures other than those specified herein may
result in hazardous radiation exposure. Never look directly into the laser light window while a laser
is emitted, otherwise eye damage may result.
The caution label is put on the remote control.
Signal Emission Indicator
Laser Light Window
Pointer Function
You can move the Spotlight or Pointer of the projector with the remote control to emphasize a part of the
projected image.
Press and hold the MENU and NO SHOW buttons for
more than 10 seconds to activate the Pointer function.
(The Laser pointer has switched to the Pointer function.)
button
1
PRESENTATION POINTER
Press the LASER button on the remote control pointing
toward the projector. The Spotlight or Pointer is
displayed on the screen with the LASER button lighting
ꢀ
MENU button
NO SHOW button
green. Then move the Spotlight or Pointer with the
PRESENTATION POINTER button. If the LASER button
does not light green and continues to emit a laser beam,
try the abovementioned procedure until the LASER
button lights green.
Press and hold the MENU
and NO SHOW buttons for
more than 10 seconds.
To clear the Spotlight or Pointer out the screen, press
the LASER button pointing toward the projector and see
if the LASER button lighting is turned off.
3
To switch to the Laser pointer again, press and hold
the NO SHOW and MENU buttons for more than 10
seconds or slide the RESET/ON/ALL-OFF switch to
“RESET” and then to “ON”.
PRESENTATION POINTER
button
When you reset the Pointer function, the remote control
code will be reset, as well.
LASER button
After the Laser pointer has
switched to the Pointer, use
the LASER button as the
Pointer function ON-OFF
switch. Press the LASER
button pointing toward the
projector and see if it lights
green.
Pointer
Spotlight
Note:
• You can choose the size of Spotlight (Large/Middle/
Small) and the pattern of Pointer (Arrow/Finger/Dot) in
the Setting Menu. See “Pointer” on page 52.
13
Part Names and Functions
wireless Mouse Operation
The remote control can be used as a wireless mouse for your computer.
Before operating the wireless mouse, connect
your computer and the projector with a USB
1
cable (not supplied). See “Connecting to a
Computer” on page 18. When the Pointer
function is used, the wireless mouse is not
available.
PRESENTATION POINTER
button
Move the pointer on the screen
with this button.
R-CLICK button
When a USB cable is connected to the
ꢀ
Acts as right (click) mouse
button while the projector and a
computer are connected with a
USB cable.
computer and the projector, turn on the
projector first, then the computer. If you turn
on the computer first, the wireless mouse
function may not operate correctly.
L-CLICK button
Acts as left (click) mouse
button while the projector
and a computer are
connected with a USB
cable.
Remote Control Code
The eight different remote control codes (Code 1–Code 8) are assigned to this projector. Switching the remote
control codes prevents interference from other remote controls when several projectors or video equipment
next to each other are operated at the same time. Change the remote control code for the projector first before
changing that for the remote control. See “Remote control” in the Setting Menu on page 52.
Press and hold the MENU and IMAGE buttons for
1
more than five seconds to switch between the codes.
The code switches sequentially for one pressing the
IMAGE button. See the list below.
While pressing the MENU
button, press the IMAGE
button number of times
corresponding to the remote
control code.
To initialize the remote control code, slide the RESET/
ON/ALL-OFF switch to “RESET,” and then to “ON.”
The initial code is set to Code 1.
ꢀ
Number of Times
Remote Control Code
Pressing IMAGE
Button
Code 1
Code ꢀ
Code 3
Code ꢁ
Code 5
Code 6
Code 7
Code 8
1
ꢀ
3
ꢁ
5
6
7
8
MENU button
IMAGE button
RESET/ON/ALL-OFF
switch
1ꢁ
Part Names and Functions
Remote Control Battery Installation
Open the battery
compartment lid.
Install new batteries
into the compartment.
Replace the
compartment lid.
1
ꢀ
3
Press the lid
downward and slide it.
Two AAA size
batteries
For correct polarity
(+ and –), be sure
battery terminals are
in contact with pins in
compartment.
To ensure safe operation, please observe the following precautions :
● Use two (2) AAA or LR03 type alkaline batteries.
● Always replace batteries in sets.
● Do not use a new battery with a used battery.
● Avoid contact with water or liquid.
● Do not expose the remote control to moisture or heat.
● Do not drop the remote control.
● If the battery has leaked on the remote control, carefully wipe the case clean and install new batteries.
● Risk of an explosion if battery is replaced by an incorrect type.
● Dispose of used batteries according to the instructions.
Remote Control Operating Range
16.4'
(5 m)
Point the remote control toward the projector (Infrared
Remote Receiver) when pressing the buttons. Maximum
operating range for the remote control is about 16.4'(5 m)
and 60 degrees in front of the projector.
30°
30°
Remote control
Adjustable Feet
Projection angle can be adjusted up to 10.0 degrees with the
adjustable feet.
Lift the front of the projector and press the feet lock latches
on both side of the projector.
Release the feet lock latches to lock the adjustable feet and
rotate the adjustable feet to a proper height, and tilt.
Keystone distortion can be adjusted automatically with the
Auto setup function or manually by using the remote control
or the menu operation (see pages 25, 46-47).
Feet Lock Latches
Adjustable Feet
15
Installation
Positioning the Projector
For projector positioning, see the figures below. The projector should be set perpendicularly to the plane of the
screen.
Notes:
• The brightness in the room has a great influence on picture quality. It is recommended to limit ambient
lighting in order to obtain the best image.
• All measurements are approximate and may vary from the actual sizes.
16
Installation
Connecting the AC Power Cord
This projector uses nominal input voltages of 100-120 V or
200–240 V AC and it automatically selects the correct input
voltage. It is designed to work with single-phase power
systems having a grounded neutral conductor. To reduce
the risk of electrical shock, do not plug into any other type of
power system.
If you are not sure of the type of power being supplied,
consult your authorized dealer or service station.
Connect the projector with all peripheral equipment before
turning the projector on.
Connect the AC power cord (supplied) to the
projector.
CAUTION
The AC outlet must be near this equipment and must be
easily accessible.
Notes:
Unplug the AC power cord when the projector is not in
use. When this projector is connected to an outlet with the
AC power cord, it is in Stand-by mode and consumes a
little electric power.
NOTE ON THE POwER CORD
AC power cord must meet requirement of the country where you use the projector.
Confirm the AC plug type with the chart below and proper AC power cord must be used.
If supplied AC power cord does not match your AC outlet, contact your sales dealer.
Projector side
AC outlet side
For Continental Europe
For the U K
For the U S A and Canada
Ground
To power cord
connector on your
projector.
To the AC outlet.
(ꢀ00 - ꢀꢁ0 V AC)
To the AC outlet.
(ꢀ00 - ꢀꢁ0 V AC)
To the AC outlet.
(1ꢀ0 V AC)
17
Installation
Connecting to a Computer
Cables used for connection
• VGA Cable (Mini D-sub 15 pin) *
• DVI-VGA Cable
• DVI Cable
• USB Cable
• Audio Cables
(*One cable is supplied; other cables are not supplied with the projector.)
Monitor Output
Audio Output
or
External Audio Equipment
Monitor Output
Monitor Input
Audio Input
USB cable
DVI
cable -VGA
cable
DVI
VGA
cable
Audio cable
(stereo)
COMPUTER IN 2
COMPUTER /COMPONENT IN
IN 1/ DVI-I /MONITOR OUT
Audio cable
(stereo)
This terminal is switchable. Set up
the terminal as Computer2 input or
COMPONENT IN or Monitor output.
(See Page 50.)
AUDIO OUT
(stereo)
COMPUTER/
COMPONENT
AUDIO IN
Notes:
• Input sound to the COMPUTER/COMPONENT AUDIO IN
terminal when using the COMPUTER IN 1/DVI-I and the
COMPUTER IN 2/ COMPONENT IN /MONITOR OUT terminal
as input.
• When the AUDIO OUT is plugged-in, the projector's built-in
speaker is not available.
• When the cable is of the longer variety, it is advisable to use the
COMPUTER IN 1 / DVI-I and not the COMPUTER IN 2 /
COMPONENT IN / MONITOR OUT.
Unplug the power cords of both the
projector and external equipment
from the AC outlet before connecting
cables.
• USB cable connection is needed when operating the computer
with the remote control or using the PAGE ▲▼ buttons on the
remote control.
18
Installation
Connecting to Video Equipment
Cables used for connection
• Video and Audio Cable (RCA x 3)
• S-VIDEO Cable
• Audio Cable
(Cables are not supplied with the projector. )
Composite Video and Audio Output
S-Video Output
(R)
(Video)
(L)
External Audio Equipment
S-Video cable
Video and audio cable
Audio Input
S-VIDEO
AUDIO IN VIDEO
Audio cable
(stereo)
AUDIO OUT
(stereo)
Notes:
• When the AUDIO OUT is plugged-in, the projector's built-
in speaker is not available.
• The S-VIDEO jack connection overrides the VIDEO
jack connection when selecting AUTO in the Input Menu
(p.39).
Unplug the power cords of
both the projector and external
equipment from the AC outlet
before connecting cables.
19
Installation
Connecting to Component Video Equipment
Cables used for connection
• Audio Cables
• Scart-VGA Cable
• Component Cable
• Component-VGA Cable
(Cabels are not supplied with this projector.)
RGB Scart 21-
pin Output
Component Video Output
(Y, Pb/Cb, Pr/Cr)
Audio Output
Component
cable
External Audio Equipment
Scart-VGA
cable
Component-
VGA cable
Audio cable
(stereo)
Audio Input
COMPUTER IN 2/ COMPONENT
IN / MONITOR OUT
COMPUTER/ COMPONENT
AUDIO IN
Audio cable
(stereo)
This terminal is switchable. Set up
the terminal as Computer2 input or
COMPONENT IN or Monitor output.
(See Page 50.)
AUDIO OUT
(stereo)
Notes:
• When the AUDIO OUT is plugged-in, the projector's
built-in speaker is not available.
• See page 72 for ordering optional cables.
• RGB Scart signal cannot be output from the MONITOR
OUT terminal.
Unplug the power cords of
both the projector and external
equipment from the AC outlet
before connecting cables.
ꢀ0
Basic Operation
Turning On the Projector
Complete peripheral connections (with a computer,
VCR, etc.) before turning on the projector.
1
ꢀ
16
Connect the projector’s AC power cord into an AC
outlet. The POWER indicator lights red. Open the Lens
cap (see pages 9,59).
Press the POWER ON/SYAND-BY button on the top
control or on the remote control. The POWER indicator
lights green and the cooling fans start to operate. The
preparation display appears on the screen and the count
down starts.
3
The preparation display will disappear
after 30 seconds.
Selected Input Source and Lamp Control
After the countdown, the input source that was selected
the last time and the lamp control status icon (see page
52) appear on the screen.
ꢁ
Lamp control status
(See page 52 for Lamp control status.)
If the projector is locked with a PIN code, PIN code
input dialog box will appear. Enter the PIN code as
instructed below.
Note:
• The Filter warning and Lamp
replacement icons may appear on the
screen depending on the usage state of
the projector.
Enter a PIN code
Use the Point ▲▼ buttons to enter a number. Press the Point
► button to fix the number and move the red frame pointer
to the next box. The number changes to “.” If you fixed an
incorrect number, use the Point ◄ button to move the pointer
to the number you want to correct, and then enter the correct
number.
PIN Code Input Dialog Box
Repeat this step to complete entering a four-digit number.
After entering the four-digit number, move the pointer to “Set.”
Press the SELECT button so that you can start to operate the
projector.
If you entered an incorrect PIN code, “PIN code” and the
number () will turn red for a moment. Enter the correct
PIN code all over again.
After the OK icon disappears,
you can operate the projector.
Notes:
• When the Logo select function is set to
“Off,” the logo will not be shown on the
screen (p.49).
• When the “Countdown off” or “Off” is
selected in the Display function, the
countdown will not be shown on the
screen (p.47).
what is PIN code?
PIN (Personal Identification Number) code is a security
code that allows the person who knows it to operate the
projector. Setting a PIN code prevents unauthorized use of
the projector.
A PIN code consists of a four-digit number. Refer to the PIN
code lock function in the Setting Menu on pages 53-54 for
locking operation of the projector with your PIN code.
• During the countdown period, all
operations are invalid.
• If the correct PIN code number is not
entered within three minutes after the
PIN code dialog box appeared, the
projector will be turned off automatically.
• The “1234” is set as the initial PIN code
at the factory.
• When the Input Search function is set to
“On2”, the input signal will be searched
automatically (p.50)
CAUTION ON HANDLING PIN CODE
If you forget your PIN code, the projector can no
longer be started. Take a special care in setting
a new PIN code; write down the number in a
column on page 75 of this manual and keep
it at hand. Should the PIN code be missing or
forgotten, consult your dealer or service center.
ꢀ1
Basic Operation
Turning Off the Projector
Press the POWER ON/STAND-BY button on the top
control or on the remote control, and “Power off?”
appears on the screen.
1
Press the POWER ON/STAND-BY button again to turn
off the projector. The POWER indicator starts to blink
ꢀ
red, and the cooling fans keep running. (You can select
the level of fans’ quietness and speed. See “Fan” on
page 55.) At this time, you can unplug the AC power
cord even if the fans are still running.
“Power off?” disappears after 4 seconds.
When the projector has cooled down enough, the
POWER indicator stops blinking and you can turn on
the projector.
3
TO MAINTAIN THE LIFE OF THE LAMP, ONCE
YOU TURN THE PROJECTOR ON, WAIT AT
LEAST FIVE MINUTES BEFORE TURNING IT
OFF.
DO NOT OPERATE THE PROJECTOR
CONTINUOUSLY WITHOUT REST.
CONTINUOUS USE MAY RESULT IN
SHORTENING THE LAMP LIFE. TURN OFF THE
PROJECTOR AND LET STAND FOR ABOUT AN
HOUR IN EVERY 24 HOURS.
Notes:
• When the On start function is set to “On,” the projector
will be turned on automatically by connecting the AC
power cord to an AC outlet (p.52).
• The running speed of cooling fans is changed according
to the temperature inside the projector.
• Do not put the projector in a case before the projector is
cooled enough.
• If the WARNING TEMP. indicator blinks or lights red, see
“WARNING TEMP. indicator” on page 57.
• While the POWER indicator is blinking, the lamp is
being cooled down and the projector cannot be turned
on. Wait until the POWER indicator stops blinking to turn
on the projector again.
• The fan rotation will terminate directly if the AC power
cord is unplugged immediately after the projector is
turned off.
• The projector can be turned on after the POWER
indicator turns red. The waiting time to restart will be
shortened when the normal power-off processing for fan
cooling is completed, compared with the time the AC
power cord is immediately unplugged after the power-
off.
ꢀꢀ
Basic Operation
How to Operate the On-Screen Menu
The projector can be adjusted or set via the On-Screen
Menu. For each adjustment and setting procedure, refer to
the respective sections in this manual.
Top Control
Press the MENU button on the top control or the
remote control to display the On-Screen Menu.
1
POINT buttons
SELECT button
Use the Point◄► buttons to select a Menu icon. Use
the Point ▲▼ buttons to select an item in the selected
menu.
ꢀ
Press the SELECT button to show the item data. Use
the Point ◄► buttons to adjust the values.
3
MENU button
To close the On-Screen Menu, press the MENU button
again.
Remote Control
POINT buttons
Note:
• The selected item is not active until the SELECT button
is pressed.
SELECT button
Menu icon
MENU button
On-Screen Menu
Menu bar
Pointer
(red frame)
Pointer (red frame)
Press the Point ▲▼ buttons
to move the pointer.
Item
SELECT
button
Item data
Press the Point
◄►buttons to adjust
the value.
Quit
Exit this menu.
ꢀ3
Basic Operation
Menu Bar
For detailed functions of each menu, see “Menu Tree” on pages 66-67.
For computer source
Screen Menu
Guide window
PC System Menu Image Select Menu
Show the selected Used to select Used to select an
computer system image mode among
(p.31).
Setting Menu
wireless Menu
Used to adjust size
of the image [Normal/
Dynamic, Standard, Real, True/Wide/Full/Custom/ operating
Blackboard(Green), and Digital zoom +/–] configurations
Image 1–4 (p.35). (pp.37–38). (pp.46-56).
Used to set
the projector’s
See owner’s manual
“Network Set-up and
Operation”.
Menu of the On-
Screen Menu.
Image Adjust Menu
Sound Menu
wired Menu
Input Menu
PC Adjust Menu
Used to adjust computer image Used to adjust
See owner’s manual
“Network Set-up and
Operation”.
Used to select an
input source either
Computer or Video.
(pp.29-30).
Used to adjust
[Contrast/Brightness/ Color
temp./White balance (R/G/B)/
the volume or
mute the sound
parameters to match
with input signal format
(pp.32–34).
Sharpness/Gamma] (pp.36–37). (p.26).
For video source
Input Menu
Image Select Menu
Screen Menu
Used to select an input Used to select an image mode
Used to set size of
image[Normal/Wide/
Custom](p.45).
source either Video or
Computer (pp.39, 40).
among Dynamic, Standard,
Cinema, Blackboard(Green) and
Image 1–4 (p.42).
Same function as
menu for computer
source.
Same function as
computer menu.
AV System Menu
Image Adjust Menu
Used to select
system of selected
Used to adjust picture image
[Contrast/Brightness/Color/Tint/
video source (p.41). Color temp./White balance (R/
G/B)/Sharpness/Gamma/ Noise
reduction/Progressive] (pp.43–44).
ꢀꢁ
Basic Operation
Zoom and Focus Adjustment
Rotate the Zoom Lever to zoom in and out.
Rotate the Focus Ring to adjust the focus of the image.
Zoom Lever
Focus Ring
Auto Setup Function
Auto setup function is provided to automatically correct
Keystone distortion according to the projector’s tilt and adjust
the computer display parameters (Fine sync, Total dots, and
Picture position) by just pressing the AUTO SETUP/CANCEL
button on the top control or the AUTO SET/CANCEL button
on the remote control. The operational setup for the Auto
setup can be changed in the Setting menu. Refer to page 46
for the setting of the Auto setup function.
Top Control
AUTO SETUP/CANCEL
button
Notes:
POINT ▲▼buttons
• Auto Keystone corrects vertical distortion only; it does not
correct horizontal distortion.
• Auto Keystone cannot work when Ceiling feature is set to
“On” in the Setting menu (p.50).
• Perfect correction of the image distortion cannot be
ensured with the Auto setup function. If the distortion
cannot be corrected properly by pressing the AUTO
SETUP/CANCEL or AUTO SET/CANCEL button, adjust
manually by pressing the KEYSTONE button on the
remote control or selecting Keystone in the Setting menu
(p.47).
• Fine sync, Total dots, Horizontal and Vertical position of
some computers cannot be fully adjusted with the Auto
PC Adjustment function. When the image is not provided
properly with this operation, manual adjustments are
required (pp.33–34).
Remote Control
KEySTONE button
AUTO SET/CANCEL
button
POINT ▲▼ buttons
Keystone Correction
If a projected picture still has keystone distortion after
pressing the AUTO SETUP/CANCEL button on the top
control or the AUTO SET/CANCEL button on the remote
control, correct the image manually as follows:
• The white arrows indicate that there is no
correction.
• A red arrow indicates the direction of correction.
• An arrow disappears at the maximum correction.
• If you press the KEYSTONE button on the remote
control once more while the keystone dialog box
is being displayed, the keystone adjustment will
be canceled.
Press the KEYSTONE button on the remote control. The
Keystone dialog box appears. Use the Point ▲▼ buttons to
correct keystone distortion. The keystone adjustment can be
stored (see page 47).
Reduce the upper width
Reduce the lower width
with the Point ▲ button.
with the Point ▼ button.
• The adjustable range is limited depending on the
input signal.
ꢀ5
Basic Operation
Sound Adjustment
Top Control
Direct Operation
VOLUME+/-
buttons
Volume
Press the VOLUME+/– buttons on the top control or on the
remote control to adjust the volume. The volume dialog box
appears on the screen for a few seconds.
Remote Control
Mute
VOL- button
VOL+ button
Press the MUTE button on the remote control to temporarily
turn off the sound. To turn the sound back on, press the
MUTE button again or press the VOLUME +/– buttons. The
Mute function is also effective for the AUDIO OUT jack.
Menu Operation
Press the MENU button to display the On-Screen
Menu. Use the Point ◄► buttons to move the red
frame pointer to the Sound Menu icon.
1
MUTE button
Volume Dialog Box
Use the Point ▲▼ buttons to move the red frame
ꢀ
pointer to the desired item, and then press the SELECT
button.
Approximate level
of the volume.
Volume
Press the Point ► button to turn up the volume; press the
Point ◄ button to turn down the volume.
Press the MUTE button to set the Mute function On
or Off. The dialog box disappears after 4 seconds.
Mute
Sound Menu
Press the Point ◄► buttons to switch the mute function On/
Off. When the sound is turned off, “On” is displayed. Press
the Point◄► buttons again to turn the sound back on.
Sound Menu icon
Approximate level of the volume.
Exit the Sound Menu.
ꢀ6
Basic Operation
Remote Control Operation
Using the remote control for some frequently used operations is advisable. Just pressing one of the buttons
enables you to make the desired operation quickly without calling up the On-Screen Menu.
COMPUTER/VIDEO/NETwORK button
Remote Control
Press the COMPUTER, VIDEO, or NETWORK button on
the remote control to select the input source. See pages 29-
30, 39-40 for details.
Refer to the owner’s manual “Network Set-up and
Operation” for details about the network input.
VIDEO button
COMPUTER
button
NETwORK
button
AUTO PC
button
FREEZE button
Press the FREEZE button on the remote control to freeze
the picture on the screen. To cancel the Freeze function,
press the FREEZE button again or press any other button.
POINT ▲▼buttons
FREEZE button
AUTO PC button
D ZOOM
NO SHOw button
Press the AUTO PC button on the remote control to operate
the Auto PC Adj. function. The computer screen adjustment
can be done easily by pressing this button. See page 32 for
details.
buttons
P-TIMER button
LAMP
CONTROL
button
IMAGE button
D ZOOM buttons
Press the D.ZOOM buttons on the remote control to enter to
the Digital zoom +/– mode. See page 38 for details.
Note:
• See the next page for the description of other
buttons.
LAMP CONTROL button
Press the LAMP CONTROL button on the remote control
to select the lamp mode for changing the brightness on the
screen.
Normal....... Normal brightness
Auto........... The brightness according to the input signal
(between High and Eco mode).
Eco ............ Lower brightness reduces the lamp power
consumption and extends the lamp life.
ꢀ7
Basic Operation
NO SHOw button
Press the NO SHOW button on the remote control to black out
the image. To restore to normal, press the NO SHOW button
again or press any other button. When a projected image is
captured and set as “User” in the Logo selection (see page 48),
the screen changes each time you press the NO SHOW button
as follows.
• • • • •
black out → the captured image → normal →
“No show” disappears after 4 seconds.
P-TIMER button
Press the P-TIMER button on the remote control. The P-Timer
display “00:00” appears on the screen and the countdown
starts (00:00–59:59).
To stop the countdown, press the P-TIMER button. To cancel
the P-Timer function, press the P-TIMER button again.
P-Timer display
IMAGE button
Press the IMAGE button on the remote control to select a
desired image mode of the screen. See pages 35, 42 for
details.
NO SHOw button
P-TIMER button
IMAGE button
Note:
• See the previous page for the description of
other buttons.
ꢀ8
Computer Input
Input Source Selection (RGB: Computer 1 (Analog)/Computer ꢀ )
INPUT button
Direct Operation
Top Control
Choose either Computer 1 (Analog) or Computer 2 by
pressing the INPUT button on the top control or press the
COMPUTER button on the remote control.
Before using these buttons, correct input source should be
selected through Menu operation as described below.
Computer 1 (Analog)
Computer 1 (Digital)
Computer ꢀ
Video
wired
wireless
Remote Control
COMPUTER button
Computer 1 (Analog)
Computer 1 (Digital)
Computer ꢀ
Menu Operation
Input Menu icon
Press the MENU button to display the On-Screen
Menu. Use the Point ◄► buttons to move the red
frame pointer to the Input Menu icon.
Input Menu
1
Move the pointer (red
arrow) to Computer 1
(Analog) and press the
SELECT button.
Use the Point ▲▼ buttons to move the red arrow
pointer to either Computer 1 (Analog) or Computer 2,
and then press the SELECT button.
ꢀ
When selecting Computer 1 (Analog), RGB input
source will be selected directly.
3
When selecting Computer 2, the Source Select Menu
appears. Move the pointer to RGB and then press the
SELECT button.
Input Menu icon
Input Menu
Move the pointer (red
arrow) to Computer 2
and press the SELECT
button.
Notes:
• Wired and Wireless are for the Network function. See
owner’s manual “Network Set-up and Operation” .
• When the Input Search function is set to “On1” or “On2”,
the input signal will be searched automatically (p.50).
• Computer 2 is not displayed when the
COMPUTER IN 2/MONITOR OUT terminal is set
as Monitor out. (p.50)
Computer
ꢀ
Move the pointer
(red arrow) to RGB.
• Computer 2 (COMPUTER IN 2/MONITOR OUT) can
accept only RGB signal.
ꢀ9
Computer Input
Input Source Selection (RGB(PC digital), RGB(AV HDCP))
Direct Operation
Top Control
INPUT button
Choose Computer 1(Digital) by pressing the INPUT button
on the top control or press the COMPUTER button on the
remote control.
Before using these buttons, correct input source should be
selected through Menu operation as described below.
Computer 1 (Analog)
Computer 1 (Digital)
Computer ꢀ
Video
wired
wireless
Remote Control
COMPUTER button
Computer 1 (Analog)
Computer 1 (Digital)
Computer ꢀ
Menu Operation
Press the MENU button to display the On-Screen
1
Menu. Use the Point ◄► buttons to move the red
frame pointer to the Input Menu icon.
Input Menu icon
Use the Point ▲▼ buttons to move the red arrow
pointer to Computer 1 (Digital), and then press the
SELECT button.
ꢀ
Input Menu
After the Source Select Menu appeared for Computer
1 (Digital), move the pointer to RGB (PC digital) or
RGB (AV HDCP), and then press the SELECT button.
3
Move the pointer
(red arrow) to
Computer 1
(Digital) and press
the SELECT button.
Notes:
Computer
• HDCP (High-bandwidth Digital Content Protection) is
a system for protecting digital entertainment content
delivered by DVI (Digital Visual Interface) from being
copied. The specification of HDCP is decided and
controlled by Digital Content Protection, LLC. Should the
specification be changed, this projector may not display
the digital content protected by HDCP.
1
Move the pointer to
the source that you
want to select and
press the SELECT
button.
• Wired and Wireless are for the Network function. See
owner’s manual “Network Set-up and Operation” .
• When the Input Search function is set to “On1” or “On2”,
the input signal will be searched automatically (p.50).
• When Monitor out is selected in the Terminal function
(p.50), Computer 2 is not displayed.
30
Computer Input
Computer System Selection
This projector automatically tunes to various types of computers based on VGA, SVGA, XGA, SXGA, WXGA,
or UXGA with its Multi-scan system and Auto PC Adjustment. If a computer is selected as a signal source, this
projector automatically detects the signal format and tunes to project a proper image without any additional
settings. (Signal formats provided in this projector are shown on pages 69-70.)
One of the following messages may appear when:
The projector cannot recognize the connected
signal conforming to the provided PC Systems.
The “Auto” is displayed on the System Menu
box and the Auto PC Adjustment function works
to display proper images. If the image is not
projected properly, a manual adjustment is
required (pp.33-34).
Auto
PC System Menu
The Auto PC Adjustment
function operates to adjust
the projector.
There is no signal input from the computer.
Check the connection between your computer
and the projector. (See “Troubleshooting” on
page 63.)
-----
The preset system is manually adjusted in the
PC Adjust Menu. The adjusted data can be
stored in Mode 1–5 (pp.33-34).
Mode 1
SVGA 1
PC Systems provided in this projector is chosen.
The projector chooses a proper system provided
in the projector and displays it.
*Mode 1 and SVGA 1 are examples.
PC System Menu
Selecting Computer System Manually
PC system can also be selected manually.
Press the MENU button to display the On-Screen
Menu. Use the Point ◄► buttons to move the red
frame pointer to the PC System Menu icon.
The PC System Menu icon
Selected system is displayed.
1
Systems in this dialog box
can be selected.
Use the Point ▲▼ buttons to move the red arrow
pointer to the desired system and then press the
SELECT button.
ꢀ
Customized Mode (1–5) set in
the PC Adjust Menu (pp.33–34).
31
Computer Input
Auto PC Adjustment
Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal and Vertical
positions to conform to your computer.
Direct Operation
Remote Control
The Auto PC adjustment function can be operated directly
by pressing the AUTO PC button on the remote control.
AUTO PC button
PC Adjust Menu
Menu Operation
Auto PC Adj
Press the MENU button to display the On-Screen
Menu. Use the Point ◄► buttons to move the red
frame pointer to the PC Adjust Menu icon.
1
PC Adjust Menu icon
Use the Point ▲▼ buttons to move the red frame
pointer to Auto PC Adj. and then press the SELECT
button twice.
ꢀ
Move the red frame pointer
to Auto PC Adj. and press
the SELECT button.
“Please wait...” appears
while the Auto PC
adjustment is in process.
To store adjustment parameters
The adjusted parameters from the Auto PC Adjustment can
be stored in the projector. Once the parameters are stored,
the setting can be done just by selecting a Mode (1–5) in the
PC System Menu (see page 31). See also “Store” on page
34.
Notes:
• Fine sync, Total dots, Horizontal and Vertical position of
some computers cannot be fully adjusted with the Auto
PC Adjustment function. When the image is not provided
properly with this operation, manual adjustments are
required (pp.33–34).
• The Auto PC Adjustment cannot be operated when 480i,
575i, 480p, 575p, 720p,1035i, or 1080i is selected in the
PC System Menu (p.31), or when the signal is coming
from the DVI-terminal.
3ꢀ
Computer Input
Manual PC Adjustment
Some computers employ special signal formats which may not be tuned by Multi-scan system of this projector.
Manual PC Adjustment enables you to precisely adjust several parameters to match those signal formats. The
projector has five independent memory areas to store those parameters manually adjusted. It allows you to
recall the setting for a specific computer.
PC Adjust Menu
Press the MENU button to display the On-Screen
Menu. Use the Point ◄► buttons to move the red
frame pointer to the PC Adjust Menu icon.
1
ꢀ
Use the Point ▲▼ buttons to move the red frame
pointer to the desired item and then press the SELECT
button to display the adjustment dialog box. Use the
Point ◄► buttons to adjust the setting value.
PC Adjust Menu icon
Move the red frame pointer
to the desired item and press
the SELECT button.
Status (Stored/Free) of the
selected Mode.
Selected Mode
Fine sync
Use the Point ◄► buttons to adjust the value, eliminating a
flicker from the image displayed (from 0 to 31).
Use the Point ◄► buttons
to adjust the value.
Total dots
Use the Point ◄► buttons to adjust the number of total dots
in one horizontal period to match your PC image.
Horizontal
Use the Point ◄► buttons to adjust the horizontal picture
position.
Press the SELECT button
here to adjust other items.
Vertical
Use the Point ◄► buttons to adjust the vertical picture
position.
Current mode
Press the SELECT button to show H-sync freq. and V-sync
freq. of the connected computer.
Clamp
Press the SELECT button at
Current mode to show the
information of the connected
computer.
Use the Point ◄► buttons to adjust the clamp level. When
the image has dark bars, try this adjustment.
33
Computer Input
Display area H
Use the Point ◄► buttons to adjust the horizontal area
displayed by this projector.
Display area V
Use the Point ◄► buttons to adjust the vertical area
displayed by this projector.
Move the red frame pointer
to the desired item and
press the SELECT button.
Reset
To reset the adjusted data, select Reset and press the
SELECT button. A confirmation box appears and then select
[Yes]. All adjustments will return to their previous figures.
Mode free
This Mode has stored
parameters.
To clear adjusted data
To clear the stored data, select Mode free and then press
the SELECT button. Move the red arrow pointer to the Mode
that you want to clear and then press the SELECT button.
Store
To store the adjusted data, select Store and then press the
SELECT button. Move the red arrow pointer to one of the
Modes 1 to 5 in which you want to store, and then press the
SELECT button.
Vacant
Values of “Total dots”,
“Horizontal”, “Vertical”,
“Display area H”, and
“Display area V”.
Quit
To store adjusted data
Exit the PC Adjust Menu.
Close this dialog box.
Notes:
• Display area (H/V) cannot be selected when 480i, 575i,
480p, 575p, 720p, 1035i, or 1080i is selected in the PC
System Menu (p.31).
• PC Adjust Menu cannot be selected when Computer
1(Digital) is selected in the Input Menu (p.30).
3ꢁ
Computer Input
Image Mode Selection
Direct Operation
Remote Control
IMAGE button
Dynamic
Select the desired image mode from among Dynamic,
Standard, Real, Blackboard (Green), Image 1, Image 2,
Image 3, and Image 4 by pressing the IMAGE button on the
remote control.
Standard
Real
Dynamic
For viewing pictures in a bright room.
IMAGE button
(Green)
Blackboard
Standard
Normal picture mode preset on the projector.
Image 1
Image ꢀ
Image 3
Real
Picture mode with improved halftone for graphics.
Blackboard (Green)
For the image projected on a blackboard.
This mode help enhance the image projected on a
blackboard. This is mainly effective on a green colored board,
not truly effective on a black colored board.
Image ꢁ
Image 1–ꢁ
For viewing with the user preset image mode in the Image
Adjust Menu (see pages 36-37). This Image memory is
provided in each computer, component, and video input
source.
Image Select Menu icon
Menu Operation
Image Select Menu
Press the MENU button to display the On-Screen
Menu. Use the Point ◄► buttons to move the red
frame pointer to the Image Select Menu icon.
1
Move the red frame pointer to
the desired image mode and
press the SELECT button.
Use the Point ▲▼ buttons to move the red frame
pointer to the desired image mode and then press the
SELECT button.
ꢀ
Dynamic
For viewing pictures in a bright room.
Standard
Normal picture mode preset on the projector.
The selected image mode is check marked.
Real
Picture mode with improved halftone for graphics.
Blackboard(Green)
For the image projected on a blackboard. See above for
further description.
Image 1~ꢁ
For viewing with the user preset image mode in the Image
Adjust Menu (see pages 36-37).
35
Computer Input
Image Adjustment
Press the MENU button to display the On-Screen
Menu. Use the Point ◄► buttons to move the red
frame pointer to the Image Adjust Menu icon.
Image Adjust Menu
1
Use the Point ▲▼ buttons to move the red frame
pointer to the desired item and then press the SELECT
button to display the adjustment dialog box. Use the
Point ◄► buttons to adjust the setting value.
Image Adjust Menu icon
Move the red frame
pointer to the desired
item and then press
the SELECT button.
ꢀ
Contrast
Press the Point ◄ button to decrease the contrast; press the
Point ► button to increase the contrast (from 0 to 63).
Brightness
Press the Point ◄ button to decrease the brightness; press
the Point ► button to increase the brightness (from 0 to 63).
Selected Image mode
Color temp
Use the Point ◄► buttons to select the desired Color temp.
level (High, Mid, Low, or XLow).
Use the Point ◄► buttons
to adjust the setting value.
white balance (Red)
Press the Point ◄ button to lighten red tone; press the Point
► button to deepen red tone (from 0 to 63).
white balance (Green)
Press the Point ◄ button to lighten green tone; press the
Point ► button to deepen green tone (from 0 to 63).
white balance (Blue)
Note:
Press the Point ◄ button to lighten blue tone; press the
Point ► button to deepen blue tone (from 0 to 63).
• When the White balance Red, Green, or
Blue is adjusted, the Color temp. level will
change to “Adj.”.
Sharpness
Press the Point ◄ button to decrease the sharpness of the
image; press the Point ► button to increase the sharpness
of the image (from 0 to 15).
Gamma
Use the Point ◄► buttons to adjust the gamma value to
obtain a better balance of contrast (from 0 to 15).
Reset
To reset the adjusted data, select Reset and press the
SELECT button. A confirmation box appears and then select
[Yes]. All adjustments will return to their previous figures.
36
Computer Input
Store
To store the adjusted data, select Store and press the
SELECT button. Use the Point ▲▼ buttons to select one
from Image 1 to 4 and press the SELECT button.
A confirmation box appears and then select [Yes]. Stored
data can be called up by selecting an “Image (1–4)” in the
Image Mode Selection on page 35.
Image Mode Menu
Move the red frame
pointer to an image
item to be set and
then press the
SELECT button.
Quit
Exit the Image Adjust Menu.
A confirmation
box appears
and then select
[Yes]
Store icon
Screen Size Adjustment
This projector has the picture screen resize function, which enables you to customize the image size.
Press the MENU button to display the On-Screen
Menu. Use the Point ◄► buttons to move the red
frame pointer to the Screen Menu icon.
Screen Menu
1
Screen Menu icon
Use the Point ▲▼ buttons to move the red frame
pointer to the desired function and then press the
SELECT button.
ꢀ
Move the red frame
pointer to the function
and press the
Normal
SELECT button.
Provide the image to fit the screen size.
True
Provide the image in its original size. When the original
image size is larger than the screen size (1024 x 768), the
projector enters to the panning mode automatically. Use the
Point ▲▼◄►buttons to pan the image. When adjusted, the
arrows will turn red. When reached to the correction limits,
the arrows will disappear.
Notes:
•The Screen Menu, except for "Normal"
and "Custom", cannot be operated when
720p(HDTV), 1035i (HDTV), or 1080i
(HDTV) is selected in the PC System
Menu (p.31).
• This projector cannot display any
resolution higher than 1600 x 1200. If
your computer’s screen resolution is
higher than it, reset the resolution to the
lower before connecting to the projector.
• The image data in other than 1024 x 768
is modified to fit the screen size in initial
mode.
wide
Provide the image to fit the wide video aspect ratio (16:9) by
expanding the image width uniformly. This function can be
used for providing a squeezed video signal at 16:9.
Full
Provide the full screen image.
• True, Full, and Digital zoom +/– cannot
be selected when 480i, 575i, 480p, or
575p is selected in the PC System Menu
(p.31).
37
Computer Input
Custom
Adjust the screen scale and position manually with this
function.
Press the SELECT button at Custom and the “Custom” is
displayed on the screen for a few seconds and then the
Aspect dialog box appears.
Scale H/V .......... Adjust the Horizontal/Vertical screen scale.
H&V................... When set to “On,” the aspect ratio is
fixed. The “Scale V” appears dimmed
and becomes unavailable. Adjust “Scale
H,” then the screen scale is automatically
modified based on the aspect ratio.
Position H/V....... Adjust the Horizontal/Vertical screen
position.
Press the SELECT button at
Common or Reset, to display a
confirmation box.
Common............ Save the adjusted scale to all the inputs.
Press the SELECT button at Common to
display a confirmation box. To save the
scale, press the SELECT button at “Yes.”
When Custom is selected, the saved scale
is used.
Reset................. Reset the all adjusted values. Press
the SELECT button at Reset to display
a confirmation box. To reset, press the
SELECT button at “Yes.”
Notes:
• When no signal is detected, “Normal” is set
automatically and the Aspect dialog box disappears.
• The adjustable range for Scale H/V and Position H/V is
limited depending on the input signal.
Remote Control
For zooming in and out the images
POINT buttons
Digital zoom +
Select Digital zoom +. The On-Screen Menu disappears and
“D. zoom +” appears. Press the SELECT button to expand
the image size. Use the Point ▲▼◄► buttons to pan the
image. The Panning function can work only when the image
is larger than the screen size.
SELECT button
A projected image can be also expanded by pressing the
D.ZOOM ▲ button on the remote control.
D ZOOM + button
D ZOOM - button
Digital zoom –
Select Digital zoom –. The On-Screen Menu disappears and
“D. zoom –” appears. Press the SELECT button to compress
image size.
The projected image can be also compressed by pressing the
D.ZOOM ▼ button on the remote control.
Notes:
• The panning function may not operate
properly if the stored Mode in the PC
Adjust Menu is used (p.34).
• The minimum compression ratio is limited
depending on the input signal, when the
Keystone function is working or when the
custom is selected for the screen size.
• True, Full, and Digital zoom +/– cannot
be selected when 480i, 575i, 480p, or
575p is selected in the PC System Menu
(p.31).
To exit the Digital zoom +/– mode, press any button except
the D.ZOOM ▲▼ buttons, SELECT, and Point buttons.
To return to the previous screen size, select a screen size
from the Screen Size Adjustment Menu or select an input
source from the Input Source Selection Menu (see pages
29-30) again, or adjust the screen size with the D.ZOOM
▲▼ buttons.
• Digital zoom +/- cannot be selected when
Full or True is selected.
38
Video Input
Input Source Selection (Video, S-video)
Direct Operation
INPUT button
Top Control
Choose Video by pressing the INPUT button on the top
control or the VIDEO button on the remote control.
Before using these buttons, correct input source should be
selected through menu operation as described below.
INPUT button
Computer 1 (Analog)
Computer 1 (Digital)
Computer ꢀ
Video
wired
wireless
Remote Control
VIDEO button
Menu Operation
Press the MENU button to display the On-Screen
Menu. Use the Point ◄► buttons to move the red
frame pointer to the Input Menu icon.
1
Input Menu icon
Use the Point▲▼ buttons to move the red arrow
pointer to Video and then press the SELECT button to
display the Source Select Menu.
ꢀ
Input Menu
Move the pointer to the desired source and then press
the SELECT button.
3
Move the pointer to
Video and press the
SELECT button.
When selecting Auto, the projector automatically
Auto
detects incoming video signal, and adjusts itself
to optimize its performance. The projector selects
connection in the following order:
1. S-video
2. Video
VIDEO
Source Select Menu (VIDEO)
When video input signal is connected to the
VIDEO jack, select Video.
Video
Move the pointer to the source
that you want to select and
press the SELECT button.
When video input signal is connected to the S-
S-video
VIDEO jack, select S-video.
Notes:
• Wired and Wireless are for the Network function. See
the owner’s manual “Network Set-up and Operation” .
• When the Input Search function is set to “On1” or “On2”,
the input signal will be searched automatically (p.50).
• When Monitor out is selected in the Terminal
function (p.50), Computer 2 is not displayed.
39
Video Input
Input Source Selection (Component, RGB Scart ꢀ1-pin)
Direct Operation
Top Control
INPUT button
Choose Computer 2 by pressing the INPUT button on the
top control or press the COMPUTER button on the remote
control.
Before using these buttons, correct input source should be
selected through Menu operation as described below.
Computer 1 (Analog)
Computer 1 (Digital)
Computer ꢀ
Video
wired
wireless
Remote Control
COMPUTER button
Menu Operation
Press the MENU button to display the On-Screen
Menu. Use the Point ◄► buttons to move the red
frame pointer to the Input Menu icon.
Computer 1 (Analog)
Computer 1 (Digital)
Computer ꢀ
1
Use the Point ▲▼ buttons to move the red arrow
pointer to Computer 2 and then press the SELECT
button.
ꢀ
Input Menu icon
Input Menu
After the Source Select Menu appeared for Computer
3
2, move the pointer to Component or RGB(Scart) and
then press the SELECT button.
When the input source is coming from video
equipment connected to the COMPUTER
IN 2/COMPONENT IN terminal with a
Component
RGB (Scart)
Move the pointer (red
arrow) to Computer 2
and press the SELECT
button.
Component-VGA Cable, select Component.
When the input source is coming from video
equipment connected to the COMPUTER
IN 2/COMPONENT IN terminal with a Scart-
VGA Cable, select RGB (Scart).
Computer
ꢀ
Source Select Menu
Move the pointer to
Component or RGB(Scart)
and press the SELECT
button.
Note:
• Wired and Wireless are for the Network function. See
owner’s manual “Network Set-up and Operation” .
• When the Input Search function is set to “On1” or “On2”,
the input signal will be searched automatically (p.50).
• When Monitor out is selected in the Terminal
function (p.50), Computer 2 is not displayed.
ꢁ0
Video Input
Video System Selection
Press the MENU button to display the On-Screen
Menu. Use the Point ◄► buttons to move the red
frame pointer to the AV System Menu icon.
1
ꢀ
Use the Point ▲▼ buttons to move the red arrow
pointer to the desired system and then press the
SELECT button.
Video or S-Video
AV System Menu (Video or S-Video)
Auto
The projector automatically detects an incoming video
system, and adjusts itself to optimize its performance.
When Video System is PAL-M or PAL-N, select the system
manually.
AV System Menu icon
The selected system is
displayed.
PAL/SECAM/NTSC/NTSCꢁ ꢁ3/PAL-M/PAL-N
Move the pointer to the
desired system and press
the SELECT button.
If the projector cannot reproduce proper video image,
select a specific broadcast signal format from among PAL,
SECAM, NTSC, NTSC 4.43, PAL-M, and PAL-N.
Component
AV System Menu (Component)
Auto
The projector automatically detects an incoming video
signal, and adjusts itself to optimize its performance.
AV System Menu icon
The selected system is
displayed.
COMPONENT VIDEO SIGNAL FORMAT
If the projector cannot reproduce proper video image, select
a specific component video signal format from among 480i,
575i, 480p, 575p, 720p, 1035i, and 1080i.
Move the pointer to the
desired system and press
the SELECT button.
Note:
• The AV System Menu cannot be selected when
selecting RGB (Scart).
ꢁ1
Video Input
Image Mode Selection
IMAGE button
Direct Operation
Remote Control
Dynamic
Standard
Cinema
Select the desired image mode from among Dynamic,
Standard, Cinema, Blackboard (Green), Image 1, Image 2,
Image 3, and Image 4 by pressing the IMAGE button on the
remote control.
Dynamic
For viewing pictures in a bright room.
(Green)
Blackboard
IMAGE button
Standard
Normal picture mode preset on the projector.
Image 1
Image ꢀ
Image 3
Cinema
Picture mode adjusted with fine tone.
Blackboard (Green)
For the image projected on a blackboard.
This mode help enhance the image projected on a
blackboard. This is mainly effective on a green colored board,
not truly effective on a black colored board.
Image ꢁ
Image 1–ꢁ
For viewing with the user preset image mode in the Image
Adjust Menu (see pages 43–44). This Image memory is
provided in each computer, component, and video input
source.
Image Select Menu icon
Image Select Menu
Menu Operation
Press the MENU button to display the On-Screen
Menu. Use the Point ◄► buttons to move the red
frame pointer to the Image Select Menu icon.
1
Move the red frame pointer to the
desired image mode and press
the SELECT button.
Use the Point ▲▼ buttons to move the red frame
pointer to the desired image mode and then press the
SELECT button.
ꢀ
Dynamic
For viewing pictures in a bright room.
Standard
Normal picture mode preset on the projector.
The selected image mode is check marked.
Cinema
Picture mode adjusted with fine tone.
Blackboard(Green)
For the image projected on a blackboard. See above for
further description.
Image1–ꢁ
For viewing with the user preset image mode in the Image
Adjust Menu (see pages 43–44).
ꢁꢀ
Video Input
Image Adjustment
Press the MENU button to display the On-Screen
Menu. Use the Point ◄► buttons to move the red
frame pointer to the Image Adjust Menu icon.
Image Adjust Menu
1
ꢀ
Use the Point ▲▼ buttons to move the red frame
pointer to the desired item and then press the SELECT
button to display the adjustment dialog box. Use the
Point ◄► buttons to adjust the setting value.
Image Adjust Menu icon
Move the red frame
pointer to the desired
item and then press
the SELECT button.
Contrast
Press the Point ◄ button to decrease the contrast; press the
Point ► button to increase the contrast (from 0 to 63).
Brightness
Press the Point ◄ button to decrease the brightness; press
the Point ► button to increase the brightness (from 0 to 63).
Color
Press the Point ◄ button decrease the intensity of the color;
press the Point ►button increase the intensity of the color
(from 0 to 63).
Use the Point ◄► buttons to
adjust the setting value.
Press the SELECT button
at this item to display other
items.
Tint
Press the Point ◄► buttons to adjust the tint value to get a
proper color balance (from 0 to 63).
Color temp
Use the Point ◄► buttons to select the desired Color temp.
level (High, Mid, Low, or XLow).
white balance (Red)
Press the SELECT button
here to display the previous
items.
Press the Point ◄ button to lighten red tone; press the Point
► button to deepen red tone (from 0 to 63).
white balance (Green)
Press the Point ◄ button to lighten green tone; press the
Point ► button to deepen green tone (from 0 to 63).
white balance (Blue)
Press the Point ◄ button to lighten blue tone; press the
Point ► button to deepen blue tone (from 0 to 63).
Notes:
• When the White balance Red, Green, or Blue is
adjusted, the Color temp. level will change to “Adj.”.
• Tint cannot be selected when the video system is PAL,
SECAM, PAL-M, or PAL-N (p.41).
ꢁ3
Video Input
Sharpness
Press the Point ◄ button to decrease the sharpness of the
image; press the Point ► button to increase the sharpness
of the image (from 0 to 15).
Gamma
Use the Point ◄► buttons to adjust the gamma value to
obtain a better balance of contrast (from 0 to 15).
Noise reduction
Noise interference on the screen can be reduced. Select
one of the following options to get smoother images.
Off.......... Disabled.
L1 .......... Lower reduction
L2 .......... Higher reduction
Progressive
An interlaced video signal can be displayed in progressive
mode. Select one of the following options.
Off.......... Disabled.
L1 .......... For an active picture.
L2 .......... For a still picture.
Film........ For watching a film. With this function, the
projector reproduces pictures faithful to the
original film quality.
Reset
To reset the adjusted data, select Reset and press the
SELECT button. A confirmation box appears and then select
[Yes]. All adjustments will return to their previous figures.
Image Mode Menu
Move the red frame
pointer to an image
item to be set and
then press the
Store
SELECT button.
Store icon
To store the adjusted data, select Store and press the
SELECT button. Use the Point ▲▼ buttons to select one
from Image 1 to 4 and press the SELECT button.
A confirmation box appears and then select [Yes]. Stored
data can be called up by selecting an “Image (1–4)” in the
Image Select Menu on page 42.
Quit
A confirmation box
appears and then
select [Yes].
Exit the Image Adjust Menu.
Notes:
• Noise reduction and Progressive cannot be selected
when 480p, 575p, 720p, 1035i, or 1080i is selected
(p.41).
• Reset and Store icons will be displayed when any
adjustment is made.
ꢁꢁ
Video Input
Screen Size Adjustment
This projector has the picture screen resize function, which enables you to customize the image size.
Screen Menu
Press the MENU button to display the On-Screen
Menu. Use the Point ◄► buttons to move the red
frame pointer to the Screen Menu icon.
1
ꢀ
Screen Menu icon
Use the Point ▲▼ buttons to move the red frame
pointer to the desired function and then press the
SELECT button.
Move the red frame pointer to the
desired function and press the
SELECT button.
Normal
Provide the image at the 4:3 normal video aspect ratio.
wide
Provide the image at the 16:9 wide screen ratio.
Custom
Adjust the screen scale and position manually with this
function.
Press the SELECT button at Custom and the "Custom" is
displayed on the screen for a few seconds and then the
Aspect dialog box appears.
Scale H/V .......... Adjust the Horizontal/Vertical screen
scale.
H&V................... When set to "On", the aspect ratio is
fixed. The "Scale V" appears dimmed
and becomes unavailable. Adjust the
"Scale H", then the screen scale is
automatically modified based on the
aspect ratio.
Press the SELECT button at
Common or Reset, to display
a confirmation box.
Position H/V.........Adjust the Horizontal/Vertical screen
position.
Common............ Save the adjusted scale to all the inputs.
Press the SELECT button at Common to
display a confirmation box. To save the
scale, press the SELECT button at "Yes",
When Custom is selected, the saved
scale is used.
Reset................. Reset the all adjusted values. Press
the SELECT button at Reset to display
a confirmation box. To reset, press the
SELECT button at "Yes".
Notes:
• When no signal is detected, "Normal" is
set automatically and the Aspect dialog
box disappears.
• The adjustable range for Scale H/V and
Position H/V is limited depending on the
input signal.
• "Wide" cannot be operated when 720p,
1035i, or 1080i is selected in the AV
System Menu (p.41).
ꢁ5
Setting
Setting
This projector has a Setting menu that allows you to set up
the other various functions described below.
Setting Menu (Language)
Press the MENU button to display the On-Screen
Menu. Use the Point ◄► buttons to move the red
frame pointer to the Setting Menu icon.
1
Setting Menu icon
Set the red frame
pointer to the item
and press the
Use the Point ▲▼ buttons to move the red frame
pointer to the desired item and then press the SELECT
button. The Setting dialog box appears.
ꢀ
SELECT button.
Language
Press the SELECT button
at Language, then the
Language Menu appears.
The language used in the On-Screen Menu is available in
English, German, French, Italian, Spanish, Portuguese,
Dutch, Swedish, Finnish, Polish, Hungarian, Romanian,
Russian, Chinese, Korean, and Japanese.
Auto setup
This function enables Auto Keystone correction and Auto PC
adjustment by pressing the AUTO SETUP/CANCEL button
on the top control or the AUTO SET/CANCEL button on the
remote control. Settings for those functions can be altered
as follows:
Auto PC Adj
On. . . Enables Auto PC Adjustment when pressing
the AUTO SET/CANCEL button on the remote
control or the AUTO SETUP/CANCEL button
on the top control.
Off. . .Disables Auto PC Adjustment.
Press the SELECT button
here to display the other
languages.
Auto Keystone
Auto..Always works and corrects keystone distortion
according to the projector's tilt.
Manual... Works only when pressing the AUTO SET/
CANCEL button on the remote control or the
AUTO SETUP/CANCEL button on the top
control.
Auto setup
Off. . .Disables Auto Keystone.
Notes:
• Auto PC Adj. and Auto Keystone cannot be set "Off" at the
same time.
• Auto Keystone corrects vertical distortion only, not correct
horizontal distortion.
• The Auto Keystone cannot work when Ceiling feature is set
"On" in the Setting menu (p.50).
Select Auto setup and this
box appears. Choose the
desired setting for Auto
• Perfect correction of the image distortion cannot be ensured
with the Auto setup function. If the distortion is not corrected
properly by pressing the AUTO SETUP/CANCEL or AUTO
SET/CANCEL button, adjust manually by pressing the
KEYSTONE button on the remote control or selecting
Keystone in the Setting menu (pp.25, 47).
keystone and Auto PC adj.
with the Point ◄► buttons.
• Fine sync, Total dots, Horizontal and Vertical position of
some computers cannot be fully adjusted with the Auto PC
Adjustment function. When the image is not provided properly
with this operation, manual adjustments are required (pp.33–
34).
ꢁ6
Setting
Keystone
Keystone
This function is used to store or reset the keystone
correction when the AC power cord is unplugged. Use the
Point ▲▼ buttons to switch between each option.
Store........ Keep the keystone correction even when the
AC power cord is unplugged.
Use the Point ◄►
buttons to switch
between the options.
Reset....... Release the keystone correction when the AC
power cord is unplugged.
To correct keystone distortion, press the SELECT button.
The “Keystone” appears on the screen. Use the Point ▲▼
buttons to correct keystone distortion (p.25).
Blue back
When this function is “On,” a blue image is displayed while
the input signal is not detected.
Display
This function decides whether to display On-Screen
Displays.
On............................ Show all the On-Screen displays.
Use this function when you want
to project images after the lamp
becomes bright enough. The factory
default setting is in this option.
Countdown Off......... Show the input image instead of
the countdown when turning on the
projector. Use this function when you
want to project the image as early as
possible even when the lamp is not
bright enough.
Off............................ Hide the On-Screen Displays except;
● On-Screen Menu
● “Power off?” (p.22)
● “No signal” for Power management
(p.51)
● “Please wait ...”
● Arrows for the True function
in the Screen Menu (p.37)
ꢁ7
Setting
Logo (Logo and Logo PIN code lock settings)
This function allows you to customize the screen logo with
Logo select, capture, and Logo PIN code lock functions.
Note:
Logo select
• When “On” is selected in the Logo PIN code lock
function, Logo select and Capture functions cannot be
selected.
Logo select
This function decides on the starting-up display from
among following options.
User......... Show the image you captured
Default..... Show the factory-set logo
Off............ Show the countdown display only
Capture
This function enables you to capture an image being
projected to use it for a starting-up display or interval of
presentations.
Capture
Select Capture and press the SELECT button.
A confirmation box appears and select [Yes] to capture the
projected image.
After capturing the projected image, go to the Logo select
function and set it to “User”. Then the captured image will
be displayed the next time you turn on the projector or
when you press the NO SHOW button (see page 28).
Select [Yes] to capture
the projected image.
Notes:
• Before capturing an image, select “Standard” in
the Image Select Menu to capture a proper image
(pp.35, 42).
• A signal from a computer can be captured up to XGA
(1024 x 768). A signal from video equipment can be
captured except for 720p, 1035i, and 1080i.
• When capturing the image that has been adjusted
by the Keystone function, the adjusted data is
automatically reset and the projector captures an
image without keystone correction.
Select [Yes] to
stop capturing.
• When the Logo PIN code lock function is set to “On,”
the Capture function cannot be selected.
• When starting to capture a new image, the previously
stored image is cleared even if you cancel the
capturing.
• When there is no captured image or it is interrupted
while capturing a image, "User" cannot be selected,
you can only switch between Default and Off.
ꢁ8
Setting
Logo PIN code lock
Logo PIN code lock
This function prevents an unauthorized person from
changing the screen logo.
Off............ The screen logo can be changed freely from
the Logo Menu (p.48).
On............ The screen logo cannot be changed without
a Logo PIN code.
If you want to change the Logo PIN code lock setting,
press the SELECT button and the Logo PIN code dialog
box appears. Enter a Logo PIN code by following the
steps below. The initial Logo PIN code is set to “4321” at
the factory.
Enter a Logo PIN code
Enter a Logo PIN code
Use the Point ▲▼ buttons to enter a number. Press the
Point ► button to fix the number and move the red frame
pointer to the next box. The number changes to “.” If you
fixed an incorrect number, use the Point ◄ button to move
the pointer to the number you want to correct, and then
enter the correct number.
After a correct Logo PIN code
is entered, the following dialog
box appears.
Repeat this step to complete entering a four-digit number.
After entering the four-digit number, move the pointer to
“Set.” Press the SELECT button so that you can start to
operate the projector.
Change the Logo PIN code lock setting
If you entered an incorrect Logo PIN code, “Logo PIN
code” and the number () will turn red for a moment.
Enter the correct Logo PIN code all over again.
Use the Point ◄► buttons to
switch On/Off.
Change the Logo PIN code lock setting
Use the Point ◄► buttons to switch On/Off, and then
press the Point ▼ button to move the pointer to “Quit.”
Press the SELECT button to close the dialog box.
Change the Logo PIN code
Change the Logo PIN code
Logo PIN code can be changed to your desired four-digit
number. Press the Point ▼ button to select “Logo PIN
code change” and then press the SELECT button. The
New Logo PIN code input dialog box appears. Set a new
Logo PIN code.
CAUTION:
wHEN yOU HAVE CHANGED THE LOGO PIN
CODE, wRITE DOwN THE NEw PIN CODE
IN COLUMN OF THE LOGO PIN CODE NO
MEMO ON PAGE 75, AND KEEP IT SECURELy
SHOULD THE LOGO PIN CODE BE LOST OR
FORGOTTEN, THE LOGO PIN CODE SETTING
CAN NO LONGER BE CHANGED
Be sure to note the new Logo PIN code and keep it at
hand. If you lost the number, you could no longer change
the Logo PIN code setting. For details on PIN code
setting, refer to “PIN code lock” on pages 53–54.
ꢁ9
Setting
Ceiling
Ceiling
When this function is set to “On,” the picture will be top/
bottom and left/right reversed. This function is used to
project the image from a ceiling-mounted projector.
Rear
When this function is set to “On,” the picture will be left/right
reversed. This function is used to project the image from
rear of the screen.
Rear
Terminal
The COMPUTER IN 2/COMPONENT IN / MONITOR
OUT terminal on the back of the projector is switchable for
computer input or monitor output. (See page 10) Select
Computer 2 or Monitor Out with the Point ◄► buttons.
Computer 2. . . computer input
Monitor Out. . . monitor out
Terminal function is not available when selecting Computer
2 to the input source. Change the input source to the others
(Computer1 or Video) so that the Terminal function will be
available. (pp29-30,39-40)
Input search
This function detects the input signal automatically. When
a signal is found, the search will stop. Use the Point ◄►
buttons to select one of the following options.
Off.......... Input search will not work.
On1........ Input search works under the following situation.
–When pressing the INPUT button on the top
control.
–When pressing the COMPUTER button or
VIDEO button on the remote control.
On2........ Input search works under the following situation.
–When turning on the projector by pressing the
POWER ON/STAND-BY button on the top
control or the remote control.
–When pressing the COMPUTER button or
VIDEO button on the remote control.
–When pressing the INPUT button on the top
control.
– When the current input signal is cut off.*
*If the No show or Freeze function is active, cancel it to
activate the Input search. It is also unavailable when On-
Screen menu is displayed.
Notes:
• While Input search is set to “On1” or “On2,” the status of Input and Lamp are displayed every time the signal
is switched.
• If the INPUT button on the top control or COMPUTER, VIDEO or NETWORK buttons on the remote control
is pressed during Input search is in progress, Input search will stop and go back to the previous input signal.
50
Setting
Standby mode
This function is available when operating the projector via
network.
Normal....... Supply the power to the network function even
after turning off the projector. You can turn on/
off the projector via network, modify network
environment, and receive an e-mail about
projector status while the projector is powered
off.
Eco ............ Select “Eco” when you do not use the projector
via network. The projector’s network function
will stop when turning off the projector.
Refer to the owner’s manual “Network Set-up and
Operation”.
Note:
• When selecting Normal, the cooling fans may be running
depending on the temperature inside the projector even
if the projector is turned off.
Power management
Power management
For reducing power consumption as well as maintaining
the lamp life, the Power management function turns off the
projection lamp when the projector is not operated for a
certain period.
Time left before Lamp is off.
If the input signal is interrupted and no button is pressed for
more than 30 seconds, the timer display with “No signal”
appears. It starts the countdown until the lamp is turned off.
Use the Point ◄► buttons to set the countdown timer.
Select one of the following options:
Ready .................. When the lamp has been fully cooled
down, the POWER indicator changes
to green blinking. In this condition, the
projection lamp will be turned on if the
input signal is reconnected or any button
on the top control or remote control is
pressed.
Shut down............ When the lamp has been fully cooled
down, the power will be turned off.
Off........................ Power management function is off.
Press the SELECT button at
Power management and this
dialog box appears. Use the
Point ◄► buttons to choose
one of the three options.
Press the Point ▼ button to
select the timer, and then
use the Point ◄► buttons to
set timer.
Note:
• Factory default is "Ready: 5 min.".
51
Setting
On start
When this function is set to “On,” the projector will be
automatically turned on just by connecting the AC power
cord to a wall outlet.
Note:
• Be sure to turn off the projector properly (see “Turning
Off the Projector” on page 22). If the projector is turned
off in the incorrect sequence, the On start function does
not work properly.
Lamp control
This function allows you to change brightness of the screen.
Normal....... Normal brightness
Auto........... The brightness according to the input signal
(between High and Eco mode).
Pointer
Eco ............ Lower brightness reduces the lamp power
consumption and extends the lamp life.
Pointer
You can emphasize a part of the projected image with
this function. Use the Point ▲▼ buttons to choose either
Spotlight or Pointer and press the SELECT button. Then
use the Point ◄► buttons to select a size of the Spotlight
(Large, Middle, or Small) or a pattern of the Pointer (Arrow,
Finger, or Dot). See “Pointer Function” on page 13.
Use the Point ▲▼ buttons
to choose either Spotlight
or Pointer, and then use
the Point ◄► buttons
to switch between the
options.
Remote control
Remote control
The eight different remote control codes (Code 1–Code 8)
are assigned to the projector; the factory-set, initial code
(Code 1) and the other seven codes (Code 2 to Code 8).
The same code should set on both the projector and the
remote control. For example, operating the projector in
“Code 7”, the remote control code also must be switched to
“Code 7”.
To change the code for the projector
Select a remote control code in this Setting Menu.
To change the code for the remote control:
While holding down the MENU button, press the IMAGE
button the number of times corresponding to the remote
control code for the projector. See “Remote Control Code”
on page 14.
5ꢀ
Setting
Security (Key lock and PIN code lock)
Key lock
This function allows you to use the Key lock and PIN code
lock function to set the security for the projector operation.
Key lock
This function locks the top control and remote control
buttons to prevent operation by unauthorized persons.
..... Unlocked.
..... Lock the operation of the top control. To
unlock, use the remote control.
..... lock the operation of the remote control.
To unlock, use the top control.
Select Key lock. Use
the Point ▲▼ buttons
to choose one of the
options and select
[Yes] to activate it.
If the top control accidentally becomes locked and
you do not have the remote control nearby or there is
something wrong with your remote control, contact the
dealer where you purchased the projector or the service
center.
PIN code lock
PIN code lock
This function prevents the projector from being operated
by unauthorized persons and provides the following
setting options for security.
Off............ Unlocked.
On1.......... Enter the PIN code every time turning on
the projector.
On2.......... Enter the PIN code to operate the projector
once the power cord is disconnected; as
long as the AC power cord is connected,
the projector can be operated without a
PIN code.
When the projector is locked
with a PIN code, the PIN code
lock symbol appears on the
menu bar.
Whenever you change the PIN code lock setting or the
PIN code (the four-digit number), you are required to
enter the PIN code. The “1234” is set as the initial PIN
code at the factory.
If you want to change the PIN code lock setting, Press
the SELECT button and the PIN code dialog box
appears.
53
Setting
Enter a PIN code
Enter a PIN code
Use the Point ▲▼ buttons to enter a number. Press the
Point ► button to fix the number and move the red frame
pointer to the next box. The number changes to “.” If you
fixed an incorrect number, use the Point ◄ button to move
the pointer to the number you want to correct, and then
enter the correct number.
Repeat this step to complete entering a four-digit number.
After a correct PIN code is
entered, the following dialog
box appears.
After entering the four-digit number, move the pointer to
“Set.” Press the SELECT button so that you can start to
operate the projector.
Change the PIN code lock setting
If you entered an incorrect PIN code, “PIN code” and the
number () will turn red for a moment. Enter the
correct PIN code all over again.
Change the PIN code lock setting
Use the Point ◄► buttons to select Off, On1, or On2 and
then move the pointer to “Quit” with the Point ▼ button.
Press the SELECT button to close the dialog box.
Use the Point ◄► buttons to
switch between the options.
Change the PIN code
Change the PIN code
The PIN code can be changed to your desired four-
digit number. Press the Point ▼ button to select “PIN
code change” and press the SELECT button. The New
PIN code input dialog box appears. Set a new PIN code.
CAUTION:
wHEN yOU HAVE CHANGED THE PIN CODE, wRITE
DOwN THE NEw PIN CODE IN COLUMN OF THE
PIN CODE NO MEMO ON PAGE 75, AND KEEP IT
SECURELy IF yOU FORGET yOUR PIN CODE, THE
PROjECTOR CAN NO LONGER BE STARTED
5ꢁ
Setting
Fan
Fan
This function provides the following options in the cooling
fans’ operation when the projector is turned off (p.22).
L1 ...... Normal operation
L2 ...... Slower and lower-sound than the normal operation
(L1), but it takes more time to cool the projector
down.
Fan control
Choose the running speed of cooling fans from the following
options.
Normal..... Normal speed
Max.......... Faster than the normal speed.
This function is used to set the cooling fans’ operation to the
projector’s setting environment. Set this function properly in
accordance with the projector’s installation method.
Otherwise, the cooling fans will not work properly and that
causes malfunctions of the projector and decreases the
lamp life.
warning log
This function records anomalous operations while the
projector is in operation and use it when diagnosing faults.
Up to 10 warning logs are displayed with the latest warning
message at the top of the list, followed by previous warning
messages in chronological order.
Note:
Fig 1 Lamp replacement icon
• When the Factory default function is executed, all the
warning log records will be deleted.
This icon appears on the screen when the end of
lamp life is approaching.
Lamp counter
This function is used to reset the lamp counter.
Note:
When the lamp life is left less than 100 hours, the Lamp
replacement icon (Fig.1) will appear on the screen,
indicating that the end of lamp life is approaching.
• This icon also appears at turning on and
selecting input source.
Fig ꢀ Lamp replacement icon
When the lamp life is left 0 hour, the Lamp replacement icon
(Fig.2) will appear on the screen, indicating that the end of
lamp life is reached.
This icon appears on the screen when the end of
lamp life is reached.
When replacing the projection lamp, reset the lamp counter.
See "Resetting the Lamp Counter" on page 61.
Note:
Note:
• At turning on, the icon (Fig.2) will appear.
At selecting input source, the icon (Fig.1)
will appear.
• The Lamp replacement icons (Fig.1 and Fig.2) will not
appear when the Display function is set to “Off” (p.47),
during “Freeze” (p.27), or “No show” (p.28).
55
Setting
Filter counter
Filter counter
This function is used to set a frequency for the filter cleaning.
When the projector reached a specified time between
cleanings, a Filter warning icon appears on the screen,
notifying the cleaning is necessary. After cleaning the filter,
be sure to select RESET and set the timer. The Filter warning
icon will not turn off until the filter counter is reset.
Use the Point ◄► buttons
to set the timer. Select
from (Off/100H/ 200H/
300H) depending on the
use environment.
For details about resetting the timer, refer to “Resetting the
Filter Counter” on page 58.
Fig 3 Filter warning icon
Filter warning icon appears on the screen at a set
time.
Note:
• This icon also appears at turning on..
Fig ꢁ Filter warning icon
Notes:
• At selecting input source, the icon (Fig.4)
will appear..
• The Filter warning icons (Fig.3 and
Fig.4) will not appear when the Display
function is set to “Off” (p.47), during
“Freeze”(p.27), or "No show" (p.28).
Factory default
Factory default
This function returns all setting values except for the user
logo, PIN code lock, Logo PIN code lock, lamp counter, and
filter counter to the factory default settings.
Quit
Select Factory default and this
box appears. Select [Yes], and
the next box appears.
Exit the Setting Menu.
Select [Yes] to
activate it.
56
Maintenance and Cleaning
wARNING TEMP indicator
The Warning Temp. indicator shows the state of the function which protects the projector. Check the state of the
Warning Temp. indicator and the POWER indicator to take proper maintenance.
The projector is shut down and the warning Temp
indicator is blinking red
Top Control
When the temperature inside the projector reaches a
certain level, the projector will be automatically shut down to
protect the inside of the projector. The POWER indicator is
blinking while the projector is being cooled down. When the
projector has cooled down enough (to its normal operating
temperature), it can be turned on again by pressing the
POWER ON/STAND-BY button.
WARNING TEMP.
blinking red
Note:
• The Warning Temp. indicator continues to blink even
after the temperature inside the projector returns to
normal. When the projector is turned on again, the
Warning Temp. indicator stops blinking.
Then check the matters below:
– Did you provide appropriate space for the projector to be
ventilated? Check the installing condition to see if the air
vents of the projector are not blocked.
– Has the projector been installed near an Air-Conditioning/
Heating Duct or Vent? Move the installation of the
projector away from the duct or vent.
– Is the filter clean? Clean the filter periodically.
The projector is shut down and the warning Temp
indicator lights red
Top Control
WARNING TEMP.
emit a red light
When the projector detects an abnormal condition, it
is automatically shut down to protect the inside of the
projector and the Warning Temp. indicator lights red. In
this case, unplug the AC power cord and reconnect it, and
then turn the projector on once again to verify operation. If
the projector cannot be turned on and the Warning Temp.
indicator still lights red, unplug the AC power cord and
contact the service station.
CAUTION
DO NOT LEAVE THE PROJECTOR WITH THE
AC POWER CORD CONNECTED UNDER AN
ABNORMAL CONDITION. IT MAY RESULT IN
FIRE OR ELECTRIC SHOCK.
57
Maintenance and Cleaning
Cleaning the Air Filters
Filter prevents dust from accumulating on the optical elements inside the projector. Should the air filters become
clogged with dust particles, it will reduce cooling fans’ effectiveness and may result in internal heat buildup and
adversely affect the life of the projector. If a “Filter warning” icon appears on the screen, clean the air filters
immediately. Clean the air filters by following the steps below.
Turn off the projector, and unplug the AC power cord
from the AC outlet.
1
Turn the projector over and remove the air filters by
pulling the latches upward.
ꢀ
Gently clean the air filters by using a brush or rinse it
softly.
3
When rinsing the air filters, dry it well. Replace the air
filters properly. Make sure that the air filters are fully
inserted to the projector.
ꢁ
CAUTION
Air filters
Do not operate the projector with the air filters
removed. Dust may accumulate on the optical
elements degrading picture quality.
Do not put anything into the air vents. Doing so
may result in malfunction of the projector.
Pull up and remove.
Note:
• When reinserting this air filters, be sure
that the slit part is facing the outer side.
RECOMMENDATION
we recommend avoiding dusty/smoky environments
when you operate the projector Usage in these
environments may cause poor image quality
When using the projector under dusty or smoky conditions,
dust may accumulate on a lens, LCD panels, or optical
elements inside the projector degrading the quality of a
projected image. When the symptoms above are noticed,
contact your authorized dealer or service station for proper
cleaning.
Resetting the Filter Counter
Be sure to reset the Filter counter after cleaning or replacing the filters.
Press the MENU button to display the On-Screen
Menu. Use the Point ◄► buttons to move the red
frame pointer to the Setting Menu icon.
Filter counter
1
ꢀ
Use the Point ▲▼ buttons to move the red frame
pointer to Filter counter and then press the SELECT
button. A dialog box appears showing the total
accumulated time of the filter use, a timer setting
option, and the reset option. Select Reset and the
“Filter counter Reset?” appears. Select [Yes] to
continue.
Select Reset and the “Filter
counter Reset?” appears.
Select [Yes],
then another
confirmation
box appears.
Another confirmation dialog box appears, select [Yes]
to reset the Filter counter.
3
Select [Yes] again to reset
the Filter counter.
58
Maintenance and Cleaning
Attaching the Lens Cap
Lens Cap
When moving this projector or while not using it over an
extended period of time, replace the lens cap.
Attach the lens cap according to the following procedures.
Pass the string through a hole of the lens cap.
1
Turn over the projector .
2
String for the lens
cap
Secure it to the
hole with a screw.
Attach the string with lens cap to a hole at the bottom of
the projector and secure it with a screw.
3
Hole
Cleaning the Projection Lens
Unplug the AC power cord before cleaning.
Gently wipe the projection lens with a cleaning cloth that
contains a small amount of non-abrasive camera lens
cleaner, or use a lens cleaning paper or commercially
available air blower to clean the lens.
Avoid using an excessive amount of cleaner. Abrasive
cleaners, solvents, or other harsh chemicals might scratch
the surface of the lens.
Cleaning the Projector Cabinet
Unplug the AC power cord before cleaning.
Gently wipe the projector body with a soft dry cleaning cloth.
When the cabinet is heavily soiled, use a small amount of
mild detergent and finish with a soft dry cleaning cloth. Avoid
using an excessive amount of cleaner. Abrasive cleaners,
solvents, or other harsh chemicals might scratch the surface
of the cabinet.
When the projector is not in use, put the projector in
an appropriate carrying case to protect it from dust and
scratches.
59
Maintenance and Cleaning
Lamp Replacement
When the projection lamp of the projector reaches its end of
life, the Lamp replacement icon appears on the screen and
LAMP REPLACE indicator lights yellow. Replace the lamp with
a new one promptly. The timing when the LAMP REPLACE
indicator should light is depending on the lamp mode.
Top Control
LAMP REPLACE
indicator
Lamp replacement icon
Note:
• The Lamp replacement icon will not appear when the
Display function is set to “Off” (p.47), during “Freeze”
(p.27), or “No show” (p.28).
CAUTION
Allow a projector to cool for at least 45 minutes
before you open the Lamp cover. The inside of the
projector can become very hot.
CAUTION
For continued safety, replace with a lamp of the
same type. Do not drop a lamp or touch a glass
bulb! The glass can shatter and may cause injury.
Lamp Cover
Screw
Follow these steps to replace the lamp.
Turn off the projector and unplug the AC power cord.
Let the projector cool for at least 45 minutes.
1
Remove the screw and open the lamp cover.
ꢀ
Remove the two (2) screws that secure the lamp. Lift
the lamp out of the projector by using the handle.
3
Lamp
Handle
Screw
Screw
Replace the lamp with a new one and secure the two
(2) screws. Make sure that the lamp is set properly.
Close the lamp cover and secure the screw.
ꢁ
Connect the AC power cord to the projector and turn
on the projector.
5
Reset the lamp counter
See “Resetting the Lamp Counter” on the next page.
6
ORDER REPLACEMENT LAMP
Replacement lamp can be ordered through your dealer. When ordering a projection lamp, give the following
information to the dealer.
● Model No of your projector
: LC-XB33N
● Replacement Lamp Type No
: POA-LMP115
(Service Parts No. 610 334 9565)
60
Maintenance and Cleaning
Resetting the Lamp Counter
Be sure to reset the Lamp counter after the lamp is replaced. When the Lamp counter is reset, the LAMP
REPLACE indicator stops lighting and the Lamp replacement icon disappears.
Press the MENU button to display the On-Screen
Menu. Use the Point ◄► buttons to move the red
frame pointer to the Setting Menu icon.
1
Use the Point ▲▼ buttons to move the red frame
pointer to Lamp counter and then press the SELECT
button. A dialog box appears showing the total
ꢀ
Select Reset and the
“Lamp replacement counter
Reset?” appears.
accumulated time of the lamp usage and the reset
option. Select Reset and the “Lamp replacement
counter Reset?” appears. Select [Yes] to continue.
Another confirmation dialog box appears, select [Yes]
to reset the Lamp counter.
3
Select [Yes],
then another
confirmation
box appears.
Note:
• Do not reset the Lamp counter without implementing
lamp replacement. Be sure to reset the Lamp counter
only after replacing the lamp.
Select [Yes] again to reset the
Lamp counter.
LAMP HANDLING PRECAUTIONS
This projector uses a high-pressure lamp which must be handled carefully and properly.
Improper handling may result in accidents, injury, or create a fire hazard.
● Lamp life may differ from lamp to lamp and according to the environment of use. There is no guarantee
of the same life for each lamp. Some lamps may fail or terminate their life in a shorter period of time
than other similar lamps.
● If the projector indicates that the lamp should be replaced, i.e., if the LAMP REPLACE indicator lights
up, replace the lamp with a new one IMMEDIATELY after the projector has cooled down.
(Follow carefully the instructions in the Lamp Replacement section of this manual.) Continuous use of
the lamp with the LAMP REPLACE indicator lighted may increase the risk of lamp explosion.
● A Lamp may explode as a result of vibration, shock or degradation as a result of hours of use as its
lifetime draws to an end. Risk of explosion may differ according to the environment or conditions in
which the projector and lamp are being used.
IF A LAMP EXPLODES, THE FOLLOwING SAFETy PRECAUTIONS SHOULD BE TAKEN
If a lamp explodes, disconnect the projector’s AC plug from the AC outlet immediately. Contact an
authorized service station for a checkup of the unit and replacement of the lamp. Additionally, check
carefully to ensure that there are no broken shards or pieces of glass around the projector or coming out
from the cooling air circulation holes. Any broken shards found should be cleaned up carefully. No one
should check the inside of the projector except those who are authorized trained technicians and who
are familiar with projector service. Inappropriate attempts to service the unit by anyone, especially those
who are not appropriately trained to do so, may result in an accident or injury caused by pieces of broken
glass.
61
Appendix
Troubleshooting
Before calling your dealer or service center for assistance, check the items below once again.
–Make sure you have properly connected the projector to peripheral equipment as described on pages 18-20.
–Make sure all equipment is connected to AC outlet and the power is turned on.
–When the projector does not project an image from the connected computer, restart the computer.
Problem:
– Solutions
No power
– Plug the power cord of the projector into the AC outlet.
– See if the POWER indicator lights red.
– Wait until the POWER indicator stops blinking to turn on the projector
again. The projector can be turned on after the POWER indicator
turns red. See page 21.
– Check the WARNING TEMP.indicator. If the WARNING TEMP.
indicator lights red, projector cannot be turned on. See page 57.
– Check the projection lamp. See page 60.
– Unlock the Key lock function for the projector. See page 53.
The initial display is not shown
– Make sure "Off" or "Countdown off" are not chosen at display
function.(see page 47)
The initial display is not same
as the default set
– Make sure "User" or "Off" are not chosen at Logo (select)
function.(see page 48)
Input signal switches automatically – Make sure Input search function is adjusted properly. See page 50.
(or does not switch automatically)
when the projector is on and you
press the input button, an icon
other than the Lamp mode icon
appears.
– That is the Filter warning icon. Refer to page 56.
An icon other than Input mode or
Lamp mode icon appears
– That is the Lamp replacement icon or the Filter warning icon. See
page 55 or 56.
Image is out of focus
– Adjust focus of the projector. See page 25.
– Provide proper distance between the projector and the projection
screen. See page 16.
– Check the projection lens to see if it needs cleaning. See page 59.
– Moving the projector from a cool to warm place may result in
moisture condensation on the projection lens. In such cases, leave
the projector off and wait until condensation evaporates.
Image is Left/Right reversed
Image is Top/Bottom reversed
– Check the Ceiling/Rear function. See page 50.
– Check the Top/Bottom function. See page 50.
Picture is not bright enough
– Check if the 'Contrast" or "Brightness" are adjusted properly.(see
page 36,43)
– Check if "Image mode" is selected properly.(see page 35,42)
– Check the lamp control function.(see page 27,52)
– Check the LAMP REPLACE indicator. If it lights, the end of lamp life
is approaching. Replace the lamp with a new one promptly.(see page
60)
6ꢀ
Appendix
No image
– Check the connection between your computer or video equipment
and the projector. See pages 18-20.
– See if the input signal is correctly output from your computer. Some
laptop computers may need to change the setting for monitor output
when connecting to a projector. See your computer’s instruction
manual for the setting.
– It takes about 30 seconds to display an image after turning on the
projector. See page 21.
– Check the Input singal, color system, video system or computer
system mode.
– Make sure the temperature is not out of the specified Operating
Temperature (41˚F–95˚F [5˚C–35˚C]).
– When "No Show" is operating, the image cannot be displayed. Press
the NO SHOW button or any other button on the remote control.
No sound
– Check the audio cable connection from audio input source.
– Adjust the audio source.
– Press the Volume + button. See page 26.
– Press the Mute button. See page 26.
– When the AUDIO OUT is plugged-in, the projector's built-in speaker
is not available
– Is the image projected? You will hear the sound only when the image
is projected.
The color is strange
– Check the Input signal, color system,video system or computer
system mode.
– Make sure the "Blackboard" is not selected on Image select
menu.(see page 35,42)
Some displays are not seen
– Check the Display function. See page 47.
during the operation
Auto PC adjustment function
does not work
– Check the Input signal. Auto PC function can not work when
480p,575p.720p,480i,575i,1035i or 1080i is selected or when the
digital signal is input into DVI terminal.(see Page 32)
– The icon is not available in grayout when the digital signal is input.
The setting does not remain
after turning off power
– Make sure you selected "Store" after adjusting setting. Some settings
can not be stored if not registered with "Store".(see page 37,44)
Power management does
work
– Power management function can not work while "Freeze" or "No
Show" function is running.(see page 51)
Capture function does not work
– Check the connection and the input signal to see if there is signal.
Auto setup does not work properly – Make sure "Off" is not selected at the Auto setup function.(see page
25,46)
– Make sure "On" is not selected at the Ceiling funtion.(see page 50)
Auto keystone function does not
work even when the projector is
tipped
– Make sure the Auto keystone function is not set to "Manual". Press
the AUTO SET UP button on the top control.(see page 25,46)
63
Appendix
The image is distorted or runs off – Check "PC adjustment" menu or "Screen" menu and adjust them.
(page 33-34, 37-38)
PIN code dialog box appears
at start-up
– PIN code lock is being set. Enter a PIN code (the “1234” or numbers
you have set). See pages 21, 53–54.
Page Up/Down function does
not work
– Make sure your computer is connected to the projector with USB
cable.(see page 18)
– Check cable connection between the projector and your computer.
(see page 18)
The Remote Control does
– Check the batteries.
not work
– Make sure no obstruction is between the projector and remote
control.
– Make sure you are not too far from the projector when using the
remote control. Maximum operating range is 16.4'(5 m).
– Make sure the code of the remote control is conformed to the
projector’s code. See page 52.
– Unlock the Key lock function for the remote control function. See
page 53.
– Check RESET/ON/ALL-OFF switch on the remote control is set to
“ON”. See page 14.
Indicator blinks or lights
– Chek the status of the projector with referring to "Indicators and
projector Condition".(see page 68 )
wireless Mouse function does
not work
– Check the connection between a projector and your computer.
– Check the mouse setting on you computer.
– Make sure the mouse driver is installed on your computer,
otherwise, the remote control can not be used as a wireless mouse.
– Make sure the signal is from the computer, otherwise, the remote
control can not be used as a wireless mouse.
– Turn on the projector before turning on the computer.
The exclamation mark appears
– Your operation is invalid. Operate correctly.
on the screen
Top control does not work
– The top control is not available if the top cotrol is locked at "Key lock"
under "Security" of SETTING section. Please check "SETTING"
section on page 53.
Uable to unlock the Logo PIN
code lock, Security key lock
or Security PIN code lock
– Contact the dealer where you purchased the projector or the service
center.
6ꢁ
Appendix
wARNING :
High voltages are used to operate this projector Do not attempt to open the cabinet
If problems still persist after following all operating instructions, contact the dealer where you purchased the
projector or the service center. Specify the model number and explain about the problem. We will advise you
how to obtain service.
This symbol on the nameplate
The CE Mark is a Directive conformity
means the product is Listed
by Underwriters Laboratories
mark of the European Community (EC).
Inc. It is designed and
manufactured to meet rigid
U.L. safety standards against
risk of fire, casualty and
electrical hazards.
65
Appendix
Menu Tree
Computer Input/Video Input
Computer 1 (Analog)
Go to System (1)
Input
Computer 1 (Digital)
RGB (PC digital)
RGB (AV HDCP)
Quit
N/A
N/A
Computer 2
RGB
Go to System (1)
Go to System (2)
N/A
Component
RGB (Scart)
Quit
Video
Auto
Go to System (3)
Go to System (3)
Go to System (3)
Video
S-video
Quit
Wired
See owner’s manual “Network Set-up and Operation”
See owner’s manual “Network Set-up and Operation”
Wireless
N/A........ not applicable
Sound
Volume
0–63
On/Off
Sound
Mute
Quit
Computer Input
SVGA 1
Dynamic
System (1)
Image Select
Mode 1
Mode 2
- - - -
Standard
Real
Blackboard (Green)
Image 1
* Systems displayed in the System Menu vary
depending on an input signal.
Image 2
Image 3
Image 4
Contrast
0–63
Image Adjust
Brightness
Color temp.
0–63
High
Auto PC Adj.
PC Adjust
Mid
Fine sync
Total dots
Horizontal
Vertical
0–31
Low
XLow
Adj.
Red
0–63
Current mode
Clamp
H-sync freq.
V-sync freq.
Quit
Green
Blue
0–63
0–63
0–15
Sharpness
Gamma
Reset
Display area H
Display area V
Reset
0–15
Yes/No
Image 1
Image 2
Image 3
Image 4
Quit
Yes/No
Mode 1
Mode 2
Mode 3
Mode 4
Mode 5
Quit
Store
Mode free
Quit
Store
Quit
Mode 1
Mode 2
Mode 3
Mode 4
Mode 5
Quit
Normal
Screen
True
Wide
Full
Custom
Scale
H&V
H/V
On/Off
H/V
Position
Yes/No
Yes/No
Common
Reset
Quit
Digital zoom +
Digital zoom –
66
Appendix
Video Input
Setting
Auto
1080i
1035i
720p
575p
480p
575i
Setting
Language
Auto setup
16 languages provided.
Quit
System (2)
Auto PC adj.
On/Off
Auto keystone
Auto
Manual
480i
Off
Keystone
Blue back
Display
Logo
Store/Reset
On/Off
Auto
System (3)
PAL
On/Countdown off/Off
Logo select
Off
SECAM
NTSC
NTSC 4.43
PAL-M
PAL-N
Default
User
Capture
Yes/No
Logo PIN code lock
Off/On
Dynamic
Standard
Cinema
Image Select
Logo PIN code change
Quit
Quit
Blackboard (Green)
Ceiling
Rear
On/Off
Image 1
Image 2
Image 3
Image 4
On/Off
Termianl
Computer2/Momitor out
Input search
Off/On1/On2
Eco/Normal
Off
Standby mode
Power management
Ready
Shut down
Timer (1–30 Min.)
Quit
Contrast
Brightness
Color
0–63
0–63
0–63
0–63
High
Mid
Image Adjust
On start
On/Off
Tint
Lamp control
Pointer
Normal/Auto/Eco
Spotlight/Pointer
Quit
Color temp.
Low
XLow
Adj.
0–63
0–63
0–63
0–15
0–15
Off
Remote control
Security
Code 1–Code 8
Key lock
Off
Red
Projector
Green
Remote control
Quit
Blue
Sharpness
Gamma
Noise reduction
PIN code lock
Off/On1/On2
PIN code change
Quit
L1
L2
Progressive
Off
Quit
L1
L2
Fan
L1/L2
Film
Fan control
Warning log
Lamp counter
Normal/Max
Reset
Store
Yes/No
Image 1
Image 2
Image 3
Image 4
Quit
Hour(s)
Reset
Quit
Yes/No
Filter counter
Hour(s)
Off/100H/200H/300H
Quit
Reset
Quit
Yes/No
Normal
Factory default
Quit
Yes/No
Screen
Wide
Custom
Scale
H/V
H&V
On/Off
H/V
Position
Yes/No
Yes/No
Common
Reset
Quit
67
Appendix
Indicators and Projector Condition
Check the indicators for projector condition.
Indicators
Projector Condition
WARNING
TEMP.
red
LAMP
REPLACE
yellow
POWER
red/green
The projector is off. (The AC power cord is unplugged.)
The projector is in stand-by mode. Press the POWER ON/STAND-
BY button to turn on the projector.
The projector is operating normally.
The projector is preparing for stand-by or the projection lamp is
being cooled down. The projector cannot be turned on until cooling
is completed and the POWER indicator stops blinking.
The projector is in the Power management mode.
The temperature inside the projector is abnormally high. The
projector cannot be turned on. When the projector is cooled down
enough and the temperature returns to normal, the POWER
indicator stops blinking and the projector can be turned on. (The
WARNING indicator keeps blinking.) Check and clean the filter.
The projector has been cooled down enough and the temperature
returns to normal. When turning on the projector, the WARNING
TEMP. indicator stops blinking. Check and clean the air filter.
The projector detects an abnormal condition and cannot be turned
on. Unplug the AC power cord and plug it again to turn on the
projector. If the projector is turned off again, unplug the AC power
cord and contact the dealer or the service center for service and
checkup. Do not leave the projector on. It may cause an electric
shock or a fire hazard.
• • • green.
• • • blinks green.
• • • red
• • • off
• • • blinks red.
When the projection lamp reaches its end of life, the LAMP REPLACE indicator lights yellow. When this indicator
lights yellow, replace the projection lamp with a new one promptly. Reset the lamp replacement counter after
replacing the lamp. See pages 60-61.
68
Appendix
Compatible Computer Specifications
Basically this projector can accept the signal from all computers with the V-, H-Frequency mentioned below
and less than 140 MHz of Dot Clock for analog signal and 110 MHz of Dot Clock for digital signal.
When selecting these modes, PC adjustment can be limited.
ON-SCREEN
DISPLAy
VGA 1
H-Freq
(KHz)
31.47
V-Freq
(Hz)
59.88
ON-SCREEN
DISPLAy
SXGA 1
H-Freq
(KHz)
64.20
V-Freq
(Hz)
70.40
RESOLUTION
RESOLUTION
640 x 480
720 x 400
640 x 400
640 x 480
640 x 480
640 x 480
640 x 480
640 x 480
640 x 480
640 x 480
1152 x 864
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 960
1152 x 900
1152 x 900
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 1024
1152 x 900
1280 x 1024
1280 x 1024
1280 x 1024
1400 x 1050
1400 x 1050
1400 x 1050
1152 x 870
1280 x 960
1280 x 1024
1366 x 768
1360 x 768
1376 x 768
1360 x 768
1280 x 768
1280 x 768
1280 x 768
1600 x 1200
1600 x 1200
1600 x 1200
1600 x 1200
1280 x 720
1280 x 720
1920 x 1035
1920 x 1080
1920 x 1080
VGA 2
VGA 3
31.47
31.47
37.86
37.86
37.50
43.269
34.97
35.00
31.47
31.25
15.734
15.625
35.156
37.88
46.875
53.674
48.08
37.90
34.50
38.00
38.60
32.70
38.00
49.72
70.09
70.09
74.38
72.81
75.00
85.00
66.60
66.67
59.88
50.00
SXGA 2
SXGA 3
SXGA 4
SXGA 5
SXGA 6
SXGA 7
SXGA 8
SXGA 9
SXGA 10
SXGA 11
SXGA 12
SXGA 13
SXGA 14
SXGA 15
SXGA 16
SXGA 17
SXGA 18
SXGA 19
SXGA 20
SXGA+ 1
SXGA+ 2
SXGA+ 3
MAC21
MAC
62.50
63.90
63.34
63.74
71.69
81.13
63.98
79.976
60.00
61.20
71.40
50.00
50.00
63.37
76.97
61.85
46.43
63.79
91.146
63.97
65.35
65.12
68.68
75.00
80.00
48.36
47.70
48.36
56.16
47.776
60.289
68.633
75.00
81.25
87.5
58.60
60.00
59.98
60.01
67.19
76.107
60.02
75.025
60.00
65.20
75.60
VGA 4
VGA 5
VGA 6
VGA 7
MAC LC13
MAC 13
480p
575p
768 x 575
––––––––
60.00
480i
(Interlace)
50.00
86.00
––––––––
575i
(Interlace)
(Interlace)
94.00
SVGA 1
SVGA 2
SVGA 3
SVGA 4
SVGA 5
SVGA 6
SVGA 7
SVGA 8
SVGA 9
SVGA 10
SVGA 11
MAC 16
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
832 x 624
56.25
60.32
75.00
85.06
72.19
61.03
55.38
60.51
60.31
51.09
60.51
74.55
(Interlace)
60.01
72.00
66.00
86.70
(Interlace)
60.18
85.024
60.19
60.12
59.90
75.06
75.08
75.08
60.00
60.00
60.00
72.00
59.87
74.893
84.837
60.00
65.00
70.00
75.00
60.00
50.00
MAC 19
XGA 1
1024 x 768
1024 x 768
60.24
48.36
75.08
60.00
MAC
WXGA 1
WXGA 2
WXGA 3
WXGA 4
WXGA 6
WXGA 7
WXGA 8
UXGA 1
UXGA 2
UXGA 3
UXGA 4
720p
XGA 2
XGA 3
XGA 4
XGA 5
XGA 6
XGA 7
XGA 8
XGA 9
XGA 10
XGA 11
XGA 12
XGA 13
XGA 14
XGA 15
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
68.677
60.023
56.476
60.31
48.50
44.00
63.48
36.00
62.04
61.00
35.522
46.90
47.00
58.03
84.997
75.03
70.07
74.92
60.02
54.58
79.35
87.17
(Interlace)
77.07
75.70
93.75
45.00
37.50
33.75
33.75
28.125
86.96
(Interlace)
58.20
58.30
72.00
720p
1035i
1080i
60.00
(Interlace)
60.00
(Interlace)
50.00
1080i
(Interlace)
69
Appendix
When the input signal is digital from DVI terminal, refer to the chart below.
ON-SCREEN
DISPLAy
D-VGA
H-Freq
(KHz)
31.47
V-Freq
(Hz)
59.94
ON-SCREEN
DISPLAy
D-SXGA1
H-Freq
(KHz)
63.98
V-Freq
(Hz)
60.02
RESOLUTION
RESOLUTION
640 x 480
640 x 480
768 x 575
800 x 600
1024 x 768
1366 x 768
1360 x 768
1376 x 768
1360 x 768
1366 x 768
1280 x 768
1280 x 768
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 720
1280 x 720
1920 x 1035
1920 x 1080
1920 x 1080
D-480p
D-575p
31.47
31.25
59.88
50.00
60.32
60.00
60.00
60.00
60.00
72.000
50.000
59.870
74.893
D-SXGA2
D-SXGA3
D-720p
60.276
31.65
37.50
45.00
33.75
33.75
28.125
58.069
29.80
50.00
60.00
D-SVGA
37.879
43.363
48.36
D-720p50
D-720p60
D-XGA
D-720p
60.00
D-WXGA 1
D-WXGA 2
D-WXGA 3
D-WXGA 4
D-WXGA 5
D-WXGA 6
D-WXGA 7
D-1035i
D-1080i
D-1080i
(Interlace)
60.00
47.7
(Interlace)
D-1080i60
D-1080i50
50.00
48.36
(Interlace)
56.160
46.500
47.776
60.289
Note:
• When the input signal is D-SXGA 1, D-SXGA 2, or D-SXGA 3, images may not be displayed properly
depending on computers.
• The specifications are subject to change without notice.
70
Appendix
Technical Specifications
Mechanical Information
Projector Type
Multi-media Projector
Dimensions (W x H x D)
Net Weight
335 mm x 97.7 mm x 238.4mm (Not including adjustable feet)
3.4 kg
Feet Adjustment
0˚ to 10˚
Panel Resolution
LCD Panel System
Panel Resolution
0.63" TFT Active Matrix type, 3 panels
1,024 x 768 dots
Number of Pixels
2,359,296 (1,024 x 768 x 3 panels)
Signal Compatibility
Color System
PAL, SECAM, NTSC, NTSC4.43, PAL-M, and PAL-N
480i, 480p, 575i, 575p, 720p, 1035i, and 1080i
H-sync. 15 kHz–100 kHz, V-sync. 50–100 Hz
High Definition TV Signal
Scanning Frequency
Optical Information
Projection Image Size (Diagonal)
Throw Distance
Adjustable from 40” to 300”
4.3'-51.6'(1.1m –13.1 m)
Projection Lens
F1.6-2.5 lens with f=17.7 mm – 28.3 mm with manual zoom and focus
220 W
Projection Lamp
Interface
Video Input Jack
RCA Type x 1
S-video Input Jack
Mini DIN 4 pin x 1
RCA Type x 2
Audio Input Jacks
Computer Input 1/DVI-I Input Terminal
Computer Input 2/Component Input /Monitor
Output Terminal
DVI-I Terminal X 1
Mini D-sub 15 pin X 1
Computer/Component Audio Input Jack
Service Port Connector
USB Connector
Mini Jack (stereo) x 1
Mini DIN 8 pin x 1
USB Series B connector x 1
Mini Jack (stereo) x 1 (variable)
100 Base-TX (100Mbps)/10 Base-T (10Mbps), RJ45
Audio Output Jack
LAN Connection Terminal
SD Card Slot
Audio
Internal Audio Amp
1.0 W RMS
Built-in Speaker
1 speaker, ø1.1"(28 mm)
Power
Voltage and Power Consumption
AC 100–120 V (3.2A Max. Ampere), 50/60 Hz (The U.S.A and Canada)
AC 200–240 V (1.6A Max. Ampere), 50/60 Hz (Continental Europe and The U.K.)
Operating Environment
Operating Temperature
Storage Temperature
41˚F–95˚F (5 ˚C–35 ˚C)
14˚F–140˚F (-10˚C–60 ˚C)
Remote Control
Battery
AAA or LR03 Type x 2
Operating Range
Dimensions
5 m/±30˚
45 mm (W) x 23 mm (H) x 145 mm (D)
3.5 oz 99 g (including batteries)
Net Weight
Laser Pointer
Class II Laser (Max. Output: 1 mW / Wave length: 640–660 nm)
71
Appendix
Accessories
Owner’s Manual (CD-ROM)
Quick Reference Guide
AC Power Cord
Remote Control and Batteries
VGA Cable
Control cable
Lens Cap with String
PIN Code Label
Network Application (CD-ROM)
● The specifications are subject to change without notice.
● LCD panels are manufactured to the highest possible standards. Even though 99.99% of the pixels are
effective, a tiny fraction of the pixels (0.01% or less) may be ineffective by the characteristics of the LCD
panels.
Optional Parts
The parts listed below are optionally available. When ordering those parts, specify the item name and Model No.
to the sales dealer.
Model No.
COMPONENT~VGA Cable
SCART~VGA Cable
: AH-98771
: AH-98881
7ꢀ
Appendix
Pj Link Notice
This projector is compliant with PJLink Standard Class 1 of JBMIA (Japan Business Machine and Information
System Industries Association). This projector supports all commands defined by PJLink Class 1 and is verified
conformance with PJLink Standard Class 1.
For PJ Link password, see page 49 on the owner’s manual “Network Set-up and Operation.”
Projector Input
PJLink Input
RGB 1
Parameter
Computer1 (Analog)
11
31
32
12
13
14
21
22
23
51
52
41
RGB (PC digital)
DIGITAL 1
DIGITAL 2
RGB 2
Computer1
(Digital)
RGB (AV HDCP)
RGB
Computer2
Video
Component
RGB (Scart)
Auto
RGB 3
RGB 4
VIDEO 1
VIDEO 2
VIDEO 3
NETWORK 1
NETWORK 2
STORAGE 1
Video
S-video
Wired
Wireless
Memory viewer
PJLink is a registered trademark of JBMIA and pending trademark in some countries.
73
Appendix
Configurations of Terminals
COMPUTER IN ꢀ /COMPONENT IN /MONITOR OUT (ANALOG)
Terminal: Analog RGB (Mini D-sub 15 pin)
Red (R/Cr) Input/Output
Green (G/Y) Input/Output
Blue (B/Cb) Input/Output
1
ꢀ
3
ꢁ
5
6
7
8
9
+5V Power/-----
Ground (Vert.sync.)
Ground/-----
2
1
5
4
3
10
10
9
8
7
6
15
12
11
14
13
11
/-----
-----
Ground (Horiz.sync.)
Ground (Red)
1ꢀ DDC Data
Horiz. sync. Input/Output (Composite H/V sync.)
13
Vert. sync.
1ꢁ
Ground (Green)
Ground (Blue)
/-----
15 DDC Clock
DVI-I TERMINAL (DIGITAL/ANALOG)
Analog Red Input
C1 C2
C1
Analog Green Input
Analog Blue Input
Analog Horiz. sync
Analog Ground (R/G/B)
Cꢀ
C3
Cꢁ
C5
1
9
2
3
4
5
6
7
8
10 11 12 13 14 15 16
17 18 19 20 21 22 23 24
T.M.D.S. Data2–
T.M.D.S. Data2+
T.M.D.S. Data2 Shield
No Connect
T.M.D.S. Data1–
T.M.D.S. Data0–
T.M.D.S. Data0+
1
ꢀ
3
ꢁ
5
6
7
8
9
17
18
19
ꢀ0
ꢀ1
ꢀꢀ
ꢀ3
ꢀꢁ
T.M.D.S. Data1+
T.M.D.S. Data1 Shield
No Connect
10
11
1ꢀ
13
1ꢁ
15
16
C3 C4
C5
T.M.D.S. Data0 Shield
No Connect
No Connect
No Connect
No Connect
DDC Clock
+5V Power
T.M.D.S. Clock Shield
T.M.D.S. Clock+
T.M.D.S. Clock–
DDC Data
Ground (for +5V)
Hot Plug Detect
Analog Vert. sync
USB CONNECTOR (Series B)
1
Vcc
2
3
1
4
ꢀ
3
ꢁ
- Data
+ Data
Ground
LAN TERMINAL
1
ꢀ
3
ꢁ
TX +
TX –
RX +
-----
5
-----
RX –
-----
6
7
8
-----
8 7 6 5 4 3 2 1
SERVICE PORT CONNECTOR
Terminal : Mini DIN 8-PIN
1
ꢀ
R X D
-----
5
6
7
8
RTS/CTS
T X D
8
5
7
6
3
4
3
ꢁ
-----
GND
2
1
GND
GND
7ꢁ
Appendix
PIN Code Number Memo
Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or lost
the number and unable to operate the projector, contact the service station.
PIN Code Lock No
Factory default set No: 1 2 3 4*
Logo PIN Code Lock No
Factory default set No: 4 3 2 1*
*Should the four-digit number be changed,
the factory set number will be invalid.
While the projector is locked with the PIN code.
Put the label below (supplied) on in a prominent place of the
projector's body while it is locked with a PIN code.
75
Appendix
Dimensions
Unit: inch(mm)
Screw Holes for Ceiling Mount
Screw: M4
Depth: 0.472(12.0)
88.7(3.49)
246.3(9.70)
53.5(2.11)
228(9.0)
90(3.54)
70(2.76)
10°MAX
G
76
U S A
EIKI International, Inc.
Canada
EIKI CANADA - Eiki International, Inc.
30251 Esperanza
Rancho Santa Margarita
CA 92688-2132 U.S.A.
Tel: 800-242-3454 (949)-457-0200
Fax: 800-457-3454 (949)-457-7878
E-Mail : usa@eiki.com
P.O. Box 156, 310 First St. - Unit 2,
Midland, ON, L4R 4K8, Canada
Tel : 800-563-3454 (705)-527-4084
Fax : 800-567-4069 (705)-527-4087
E-Mail : canada@eiki.com
Eastern Europe
Deutschland & Österreich
EIKI Deutschland GmbH Am Frauwald
12 65510 Idstein
Deutschland
Tel: 06126-9371-0
ˇ
EIKI CZECH spol. s.r.o.Umelecká 15
170 00 Praha 7
Czech Republic
Tel : +42 02 20570024
+42 02 20571413
Fax : +42 02 20571411
E-Mail : easterneurope@eiki.de
Fax: 06126-9371-14
E-Mail : info@eiki.de
China
japan & worldwide
EIKI Industrial Company Limited.
4-12 Banzai-Cho, Kita-Ku, Osaka,
530-0028 Japan
EIKI (Shanghai) Co.,LTD
1.Dapu Road, Golden Magnolia
Plaza #2109 Shanghai,
200023 China
Tel : +81-6-6311-9479
Tel : 86-21-5396-0088
Fax : 86-21-5396-0318
E-Mail : info@eiki-china.com
Fax : +81-6-6311-8486
KD3BC
©2007 Eiki International, Inc.
|
Hanns G Computer Monitor HSG1070 User Manual
GE 27934 User Manual
GE 27920 User Manual
DoubleSight Displays DS 240 Series User Manual
Cypress CY62157CV30 User Manual
Compaq 122660 XX6 User Manual
Camco HEAVY DUTY SERIES INDEX DRIVES 2050E User Manual
Blodgett DFG 200 User Manual
Asus A8R MVP User Manual
Aiwa TV A2115 User Manual