1
Verify Kit Contents
Verify that your kit contains one of each of these components:
S2
X5
X29
Quick Start Guide
X18
Digi JumpStart Kit®
X24
Windows Embedded CE 6.0
S4
Quick Start Guide
™
ConnectCore Wi-9M 2443
J1
X7
Digi JumpStart Kit®
S7
S6
S3
X27
X16
Quick Start Guide
(this guide)
Windows Embedded CE 6.0
™
ConnectCore Wi-9M 2443
X6
S5
X23
X33
Digi JumpStart CD
Development Board
90033928_C
802.11 a/b/g
Antenna
802.11 b/g
Antenna
2
Install Software
Certiꢀcation Card
Serial Null Modem Cable
Ethernet Cable
Microsoft
Insert the Digi JumpStart CD. If autorun is enabled, the “Welcome”
web page will appear. If not, open the ꢀle “welcome.html” on the
Digi JumpStart CD. Follow the instructions on the “Welcome” page
to install Digi Embedded Windows CE software.
a
Alternative Power Supply Plugs
Windows Embedded
CE 6.0 180-Day
Evaluation Kit
Power Supply
Connect Hardware to Development Board
3
Connect to VGA Monitor
Connect Serial Port A
a
c
802.11 b/g
antenna
Connect Ethernet
and/or antennas
802.11 a/b/g
antenna
VGA Port [X18]
b
Power Connector [X24]
S2
X5
ON
b
X18
X29
or
X24
d
S4
Secondary [X29]
J1
X7
Connect to Network
a
S7
S6
S3
Connect to PC
Serial COM Port
b
X27
X16
Ethernet Port [X7]
Serial Port A [X27]
802.11 b/g
antenna
Connect VGA cable from
VGA monitor (not included
in kit) to VGA port
802.11 a/b/g
antenna
c
X6
S5
b
or
Add the appropriate plug
and connect the power supply.
Do not switch power on.
X23
Primary [X23]
d
X33
Development Board
4 What’s Next?
After going through Building Your First Application, you are
encouraged to read the ‘Digi JumpStart for Windows Embedded
CE 6.0 User’s Guide,’ accessible from the Visual Studio menu
Help > Help Contents, which explains in detail all the elements of the
development process such as kernel conꢀguration, debugging, ꢀle
transfer, ꢀrmware update, etc.
Software instructions are on the Welcome page of the CD-ROM.
When the software installation is complete, follow the instructions in
Building Your First Application. This guide introduces you to quickly
creating and running an application in the target platform. Building
Your First Application is accessible from the Start menu group.
a
b
© Digi International, Inc., 2011
Digi, Digi International, ConnectCore, Digi JumpStart Kit, and the Digi logo are trademarks or registered trademarks of Digi International, Inc., in the United States and other countries worldwide. All other trademarks are the property of their respective owners.
|