Dell OptiPlex ARAIO User Manual

User's Guide  
dell.com/regulatory_compliance  
DellTM OptiPlexTM 780-USFF All In One (AIO) Stand  
The Dell OptiPlex 780-USFF All-in-One Stand is a unique  
mounting solution with integrated cable management  
designed to adapt to your unique environment.  
1/15  
Contents  
1 About your Dell OptiPlex 780-USFF AIO Stand ……………………………………………….. 4  
2 Setting up the Dell OptiPlex 780-USFF AIO Stand ……………………………………………. 6  
3 Specifications …………………………………………………………………………................... 15  
4 Finding Information ……………………………………………………………………................. 15  
3/15  
About your Dell OptiPlex 780-USFF AIO Stand  
1
1 DELL Monitor: P190S/1909W/P2210  
2 DELL Quick Release Monitor Mounting Plate  
3 System Sleeve  
4 System Chassis: Dell OptiPlex 780-USFF  
5 Cable Tray  
6 Cable Channels  
7 Swiveling Base - 360o Pan  
8 Front Cable Cover  
9 Provided Cables: VGA and USB  
4/15  
10 Handle  
11 System Cable Cover Lock Switch  
12 System Label Carrier  
13 System Cable Cover  
14 Padlock Ring  
15 Network Cable Slot  
16 Wall Power Cord Slot  
17 System Lock Switch  
18 Kensington Security Slot  
5/15  
Setting up the Dell OptiPlex 780-USFF AIO Stand  
2
Components  
AIO Stand, Cable Cover, System Sleeve, VGA / USB Cable  
NOTERefer to the Monitor and System Instruction Guides, packaged separately.  
______________________________________________________________________________________  
Place the AIO Stand on a level, stable surface.  
1
WARNINGTo reduce risk of injury and/or  
equipment damage, the AIO Stand must be  
placed on a level, stable surface.  
6/15  
Determine which monitor cable will be used (VGA or DisplayPort), and follow appropriate  
instructions.  
2
Locate the provided VGA cable.  
a
VGA  
b Route the VGA cable through the cable tray.  
DisplayPort  
Locate the system-end of the cable in the cable tray.  
a
b
Remove the front cable cover to locate the monitor-end of the cable.  
7/15  
Attach the monitor to the AIO stand.  
3
Connect the power plug, the monitor cable (VGA or DisplayPort), and the USB cable to the  
monitor.  
4
DisplayPort  
8/15  
Route the accessory cable (keyboard, mouse, speakers, etc.) through the cable tray.  
5
Ensure the system sleeve is unlocked (orange tab will show).  
6
9/15  
7 a  
Extend the system label carrier.  
If applicable, remove mylar from front surface(s) of chassis prior to sleeve installation.  
Insert the system into the system sleeve in the orientation illustrated below.  
b
CAUTION  
Do not reverse the  
insertion orientation!  
NOTEWhen inserted  
properly, the CD end of  
the system will reach  
the end of the system  
sleeve.  
Slide the switch to lock the system sleeve.  
8
10/15  
Ensure the AIO stand is unlocked (orange tab will show).  
9
Slide the system sleeve onto the back of the AIO stand. Ensure that the cables do not  
impede the sleeve from fully seating onto the stand.  
10  
11/15  
Connect the monitor cable (VGA or DisplayPort), power plug, network cable and any  
accessory cables, (keyboard, mouse, speaker, etc.) to the rear of the system.  
11  
12  
a Slide the lock switch out to unlock the cable cover. With the system label carrier  
extended, attach the cable cover underneath the label carrier and to the system sleeve.  
Then push the system label carrier back to reveal the cable cover lock switch.  
b
Slide the switch to lock the cable cover.  
12/15  
Slide the switch to lock the AIO stand.  
13  
Attach customer-supplied security accessories.  
NOTEThese security features are only accessible when the AIO Stand lock is engaged as shown  
in Step 13.  
14  
13/15  
15  
a Connect your facility network cable to the rear of the AIO stand to access the facility  
network.  
b
Connect the power cord supplied with the system to the rear of the AIO Stand and to  
facility wall power.  
______________________________________________________________________________________  
Range of Motion  
14/15  
Specifications  
3
Physical Dimensions*  
Height  
15 inches (380 mm)  
9.6 inches (245 mm)  
10.8 inches (275 mm)  
8.0 lbs (3.7 kg)  
Depth  
Width  
Weight  
* not including monitor and system  
Monitor and System Weight Capacities  
Dell Monitor: P190S/1909W/P2210  
Dell System: OptiPlex 780-USFF  
10.1 lbs (4.6 kg)  
7 lbs (3.2 kg)  
Temperature  
Operating  
32oF to 95(0oC to 35oC)  
-40oF to 149(-40oC to +69oC)  
-40oF to 149(-40oC to +69oC)  
Storage  
Transportation  
Power Ratings  
Input  
100-120 V~, 50/60 HZ, 3.5 A  
220-240 V~, 50/60 HZ, 1.75 A  
100-120 V~, 50/60 HZ, 1.5 A  
220-240 V~, 50/60 HZ, 0.75 A  
100-120 V~, 50/60 HZ, 2.0 A  
220-240 V~, 50/60 HZ, 1.0 A  
Output - Monitor Port  
Computer Port  
Security Features  
Kensington Security Slot  
Padlock Ring  
Accepts standard Kensington Slim MicroSaver  
Accepts Padlocks with shaft diameter of 3 - 8 mm  
Finding Information  
If you need to:  
See:  
Find safety best practices information for your computer,  
review Warranty information, Terms and Conditions (U.S.  
only), Safety instructions, Regulatory information,  
Ergonomics information, and End User Agreement.  
The safety and regulatory documents that shipped with  
your computer and the Regulatory Compliance  
15/15  

GE Profile PT960DPBB User Manual
Eiki Multimedia Projector LC XT5 User Manual
Dell E773c User Manual
Dacor Cooktop IWD24 User Manual
Dacor Convection Oven IWD27 User Manual
Cypress CY7C1462AV33 User Manual
Clarity Cordless Telephone User Manual
BenQ Computer Monitor GL941 User Manual
Asus Computer Monitor 90LMB5101T11081C User Manual
Ariston FD88 User Manual