Dell D1920F User Manual

TM  
Dell D1920 monitor  
User Manual  
English  
Pyccкий  
Svenska  
Suomi  
简体中文  
繁體中文  
日本语  
Deutsch  
Français  
Italiano  
Dansk  
한국어  
Español  
Portuquês  
Polski  
Norsk  
Nederlands  
Model: D1920f  
PRECAUTIONS  
Information for users applicable in United States of America  
Maintenance  
LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE  
RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE OR  
FEDERAL LAWS. FOR MORE INFORMATION, CONTACT THE ELECTRONIC  
INDUSTRIES ALLIANCE AT WWW.EIAE.ORG. FOR LAMP SPECIFIC  
DISPOSAL INFORMATION CHECK WWW.LAMPRECYCLE.ORG.  
1.Clean the cabinet and controls with a soft cloth lightly moistened with a mild detergent  
solution. Do not use any abrasive materials or solvents such as alcohol or benzene.  
2.Do not rub, touch, or tap the surface of the screen with sharp or abrasive items such as  
pens or screwdrivers, as the screen may scratch.  
3.Do not insert objects or spill liquids into the ventilation ports on the monitor’s rear, as  
fire, electric shock, and / or unit failure may result.  
Installation  
Transporting the monitor  
1. Do not cover or block the ventilation ports on the rear of the monitor.  
2. Do not install the monitor close to heat sources such as radiators or air ducts, or in a  
location exposed to direct sunlight, excessive dust, mechanical vibration,or shock.  
3.The apparatus shall only be used between 5° tilted forward and 15° tilted backward as  
normal operation position. If the tilt angle exceeds 15°, it shall be used for wall  
mounting or packaging only.  
1.When carrying the display for repair or service, disassemble the monitor and pack in its  
original packing. To disassemble the neck and base, press the "release button" located  
on the back of the neck and detach the neck/base, then remove the base from the neck  
by pressing the “release tabs” located under the base plate and pull the neck off the  
base, finally use the original carton and packing materials to wrap the display and its  
accessories.  
Power connection  
1.Use the correct power cord for your local voltage.  
2.Use an accessible outlet close to the monitor.  
3.Do not allow anything to rest on the power cable.  
4.Only use the power adapter attached to the monitor.  
5.Disconnect the power cable from the power supply if:  
5.1 You will not use the monitor for an extended period.  
5.2 The cable is damaged or frayed.  
5.3 The monitor has been dropped or the cabinet damaged.  
5.4 A distinct change in performance indicates a need for servicing.  
- 1 -  
GETTING STARTED  
Package contents  
Monitor installation  
Before beginning, ensure that the carton contains the following items:  
1.Setting up the monitor  
1.1 Take out the monitor, stand and monitor base from the package.  
1.2 Place the monitor base on the desk and then slide the neck  
into the slots of base. (Make sure the direction of the neck is  
correct.)  
1. LCD Monitor  
1.3 Hold the monitor and then slide the monitor into the neck. (Make  
sure the direction of the neck is correct)  
2. Monitor Base and Neck  
(the shape of base may vary according to the monitor model)  
2.Connecting signal cable  
2.1 Switch off your computer  
2.2 Connect the signal cable to the D-SUB port at the rear of  
the monitor and tighten the connector screws  
2.3 Connect the other end of signal cable to the computer's  
VGA port and tighten the connector screws.  
2.4 Note: Ensure the display setting does not exceed  
1366 X 768 @ 60Hz.  
3. Power Cord (plug may vary according to the electrical standards  
for your area)  
4. Analog Signal Cable  
3.Connecting power  
Connect one end of the power cable to the monitor and  
the other end to a power outlet.  
5. CD-ROM (contains user manual)  
6 .Quick Installation Guide  
4.Switching on  
Switch on your computer.  
POWER  
D-SUB  
You should now be able to see the picture. If not, see the  
troubleshooting section of this guide.  
- 2 -  
Identifying parts and controls  
Customizing Your Monitor  
The On Screen Display (OSD) system provides a full range of customizable tools to  
optimize your display.  
1. The color of the LED light on the power button  
LED light is bright blue when the monitor is fully operational, and it is orange when  
inactive.  
determines the monitor state. The  
Although you could perform comprehensive customization, we  
strongly recommend that you use the “AUTO ADJUSTMENT”  
2.The function keys are used to adjust the settings of your monitor. For more information  
on function keys, see "Function Keys Operation" on page 4.  
Important:  
function.  
It can utilize the default values to thoroughly optimize the  
performance of the display. Activate the OSD munu.  
Working with OSD Group  
Select the first button on the left  
ADJUSTMENT” function.  
to activate the “AUTO  
You can identify the function of a button through the corresponding icon displayed on the  
pop-up window of OSD. The following images show that the buttons on the monitor can  
be used for multiple tasks.  
In addition, we have also prepared other relatively simple methods to  
change the display modes. There are 4 modes, which include:  
GENERAL, MOVIE, PICTURE, GAME.  
Important:  
First Level  
1. Press  
button to start.  
2. Press any of the rest 4 buttons to activate the OSD menu.  
3. Press the corresponding function icon button on the pop-up window of the OSD.  
- 3 -  
Hotkeys  
Auto-Adjustment  
Brightness  
Contrast  
1.Auto Adjustment  
General  
Movie  
English  
Deutsch  
Français  
Italiano  
Español  
简体中文  
繁體中文  
日本語  
When the OSD functions are displayed, press the first button on the left  
you can automatically optimize the image performance.  
2.Theme Mode Menu  
, and then  
to shift  
Power  
Theme Mode  
Menu  
Picture  
Game  
17 Lauguages control menu  
User/Red  
OSD Menu  
Language  
Main Menu  
When the OSD functions are displayed, press the second button on the left  
<
Color  
Temperature  
<
Norsk  
the mode. You may press  
and  
to make adjustments between 4 modes.  
Русский  
Svenska  
Suomi  
User/Green  
User/Blue  
E
Press  
, and then you can leave automatically.  
Cool  
Dansk  
3.Main Menu  
Warm  
Polski  
When the OSD functions are displayed, press the second button on the right  
to  
System  
Recall  
Nederlands  
Portuquês  
한국어  
White Balance  
Horizontal Position  
Vertical Position  
Phase  
enter the main menu. And then press  
Press to enter into the option. Press  
or  
to select the option.  
E
or  
to leave.  
Clock  
DDC/CI  
DCR  
Function Keys Operation  
Demo  
Information  
The following illustration shows the options that can be accessed through the OSD main  
menu.  
To navigate through the OSD menu:  
1. Activate the OSD main menu: Under the energized condition, press any function key to  
execute the function.  
2. Confirm the selection: Press the  
button.  
<
3. Browse the previous or next option: Press  
and  
.
<
4. Adjust the option value: Press  
and  
to adjust the value.  
5. Return to the higher level menu. Press  
to return to the higher level.  
E
6. Exit: Press  
to exit OSD menu; Or if you do not press any button, it will  
automatically disappear after 30 seconds.  
- 4 -  
OSD Icon List  
AUTO  
ADJUSTMENT  
* Adjust the monitor internal signal phase  
* Optimize the picture performance automatically.  
PHASE  
CLOCK  
DDC/CI  
* Activate the built-in color engine to enhance the graphic  
effects according to the different situations of the display.  
contents  
THEME MODE  
* Adjust the monitor internal sampling clock rate  
* Adjust the luminance level of the screen.  
* Adjust the contrast level of the screen.  
BRIGHTNESS  
CONTRAST  
* Select turn on or turn off DDC/CI function  
* 2 seconds after activation of this function, some of the  
menus will stimulate feature-grading effects 2 times over.  
DEMO  
OSD MENU  
LANGUAGE  
* Select your own preference of language of OSD menu.  
* Show the frequency, resolution, input interface and other  
operating details about this display.  
* Select the setting of screen color-Cool, Warm or User.  
* Cool: Select the setting of screen color to be bluish white.  
* Warm: Select the setting of screen color to be reddish white.  
INFORMATION  
RECALL  
COLOR  
TEMPERATURE  
* Reset monitor parameters back to factory preset values.  
* Adjust the mechanical specifications regarding the display.  
(White Balance, Clock, Phase, DDC/CI, DCR, DEMO,  
Horizontal Position, Vertical Position, Information)  
SYSTEM  
SYSTEM  
WHITE BALANCE  
* Adjust the balance of the input signal.  
HORIZONTAL  
POSITION  
* Shift the screen left or right  
* Shift the screen up or down  
VERTICAL  
POSITION  
DYNAMIC CONTRAST Display high dynamic contrast ratio, and present more  
*
RATIO  
colorful screen.  
- 5 -  
Troubleshooting  
Symptom  
Check Items  
1.No picture  
1. Check if the monitor is turned on (press the button  
again).  
2.LED indicator is not lit.  
2. Check if the power cord is properly connected to the monitor and power outlet.  
3 .Check if there is electricity coming from the power outlet (use another device to check for power).  
1.No picture  
1 Check if your computer is turned on.  
2.LED indicator is orange  
2 Ensure the computer is not in power saving mode (move the mouse or press a key on the keyboard  
to wake up the computer).  
3 Check if the video signal cable is properly connected to the monitor and computer.  
1.Picture shows “ NO SIGNAL INPUT ”  
1 Check if your computer is turned on.  
2 Check if the video signal cable is properly connected to the monitor and computer.  
1.Picture shows “ INPUT SIGNAL OUT OF RANGE ” 1. Ensure that the resolution and/or refresh rate is set correctly.  
Make sure your display setup is under VESA 1366 X 768 at 60Hz  
Important  
- 6 -  
Technical Features and Specifications  
Description  
Item  
409.8(H) x 230.4(V) mm  
Display Size  
Panel  
0.300(H) x 0.300(V) mm  
D-sub  
Pixel Pitch  
Analog  
Connector  
Tilt Angle  
-5° ~ 15°  
Tilt  
Dimensions  
(W x H x D)  
Net  
About 440.4(W) x 353.6(H) x 200.0 (D) mm  
About 3.3 kg  
Weight  
Power  
Net  
AC  
Consumption  
Horizontal  
AC 100~240V, 50Hz/60Hz, 1.2A  
Active:<25W / Standby:<1W  
Interface  
Frequency  
30 ~ 83KHz  
50 ~ 75Hz  
Vertical  
Temperature  
Humidity  
0°C to 40°C  
Operating  
Condition  
10% to 90% (No Condensation)  
0 ~ 10,000 ft.  
Altitude  
-20°C to 60°C  
Temperature  
Storage  
10% to 90% (No Condensation)  
0 ~ 40,000 ft.  
Humidity  
Altitude  
Condition  
- 7 -  

HP Hewlett Packard L1955 User Manual
HP Hewlett Packard HP Pavilion LED LCD Monitor 2211F User Manual
HP Hewlett Packard Compaq Advantage LA2206x 21 5 XN376A8#ABA User Manual
Hobart HEC5 ML 126750 User Manual
Cypress CY8C21x34 User Manual
Cypress CY7C2565KV18 User Manual
Cypress CY7C1318BV18 User Manual
Apple Processor Cage and Clips User Manual
Apple 073 1059 User Manual
Adesso WKB 4400UB User Manual