Dell Computer Monitor S2240M User Manual

Dell™ S2240M/S2340M Monitor User's Guide  
Notes, Cautions, Warnings  
NOTE: A NOTE indicates important information that helps you make better use of your computer.  
CAUTION: A CAUTION indicates potential damage to hardware or loss of data if instructions are not followed.  
WARNING: A WARNING indicates a potential for property damage, personal injury, or death.  
Information in this document is subject to change without notice.  
© 2012 Dell Inc. All rights reserved.  
Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.  
Trademarks used in this text: Dell and the DELL logo are trademarks of Dell Inc.; Microsoft and Windows are either trademarks or registered  
trademarks of Microsoft Corporation in the United States and/or other countries. ENERGY STAR is a registered trademark of the U.S. Environmental  
Protection Agency. As an ENERGY STAR partner, Dell Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency.  
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products.  
Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.  
Model S2240Mc/S2340Mc  
July 2012 Rev. A00  
 
VGA Cable  
DVI-HDMI Dongle (Optional)  
Notes: The image is for illustration purpose only and  
appearance of the actual dongle included may vary.  
Drivers and Documentation media  
Quick Setup Guide  
Product Information Guide  
Product Features  
The Dell™ S2240M/S2340M flat panel display has an active matrix, Thin-Film Transistor, Liquid Crystal Display. The monitor's features include:  
S2240M: 54.61 cm (21.5 inches) viewable area display. 1,920 x 1,080 resolution, plus full-screen support for lower resolutions.  
S2340M: 58.42 cm (23.0 inches) viewable area display. 1,920 x 1,080 resolution, plus full-screen support for lower resolutions.  
Wide viewing angle to allow viewing from a sitting or standing position, or while moving from side-to-side.  
Removable pedestal.  
Plug and play capability if supported by your system.  
On-Screen Display (OSD) adjustments for ease of set-up and screen optimization.  
Software and documentation media which includes an information file (INF), Image Color Matching File (ICM), and product documentation.  
Dell Display Manager included (comes in the CD attached with the monitor).  
Security lock slot.  
Dell Display Manager functionality.  
ENERGY STAR compliant.  
EPEAT™ Silver compliant.  
RoHS compliant.  
Identifying Parts and Controls  
Front View  
     
1.  
2.  
3.  
Function buttons (For more information, see Operating the Monitor)  
Power On/Off button  
Power LED indicator  
Back View  
Label  
Description  
Use  
1
2
3
4
5
6
7
8
Regulatory rating label  
DVI connector  
Lists the regulatory approvals.  
To connect your computer to the monitor using a DVI cable.  
To connect your computer to the monitor using a VGA cable.  
To connect the monitor power cable using a 12V DC adapter for transition.  
Use a security lock with the slot to help secure your monitor.  
Refer to this label if you need to contact Dell for technical support.  
For cable management.  
VGA connector  
Adapter connector  
Security lock slot  
Barcode serial number label  
Cable clip  
Stand release button  
To release stand from monitor.  
Side View  
Left view  
Right view  
Bottom View  
Monitor Specifications  
The following sections give you information about the various power management modes and pin assignments for the various connectors of your monitor.  
Power Management Modes  
If you have VESA's DPM compliance display card or software installed in your PC, the monitor automatically reduces its power consumption when not in use.  
This is referred to as Power Save Mode. If the computer detects input from keyboard, mouse, or other input devices, the monitor automatically resumes  
functioning. The following table shows the power consumption and signaling of this automatic power saving feature:  
VESA Modes  
Horizontal Sync  
Vertical Sync  
Video  
Power Indicator  
Power Consumption  
Normal operation  
Active  
Active  
Active  
White  
23 W (Maximum) for S2240M  
18 W (Typical) for S2240M  
24 W (Maximum) for S2340M  
19 W (Typical) for S2340M  
Active-off mode  
Switch off  
Inactive  
-
Inactive  
-
Blank  
-
Amber  
Off  
Less than 0.5 W  
Less than 0.5 W  
The OSD will only function in the normal operation mode. When any button except power button is pressed in Active-off mode, the following messages will be  
displayed:  
Activate the computer and monitor to gain access to the OSD.  
NOTE: Dell S2240M/S2340M monitor is ENERGY STAR®-compliance.  
   
* Zero power consumption in OFF mode can only be achieved by disconnecting the main cable from the monitor.  
** Maximum power consumption with max luminance and contrast.  
Pin Assignments  
15-pin D-Sub connector  
Pin Number Monitor Side of the 15-pin Side Signal Cable  
1
Video-Red  
Video-Green  
Video-Blue  
GND  
2
3
4
5
Self-test  
GND-R  
6
7
GND-G  
8
GND-B  
9
DDC +5V  
GND-sync  
GND  
10  
11  
12  
13  
14  
15  
DDC data  
H-sync  
V-sync  
DDC clock  
DVI Connector  
Pin  
Number  
24-pin Side of the Connected Signal  
Cable  
1
2
3
4
TMDS RX2-  
TMDS RX2+  
TMDS Ground  
Floating  
5
Floating  
6
DDC Clock  
DDC Data  
7
8
Floating  
9
TMDS RX1-  
TMDS RX1+  
TMDS Ground  
Floating  
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
Floating  
+5 V power  
Self test  
Hot Plug Detect  
TMDS RX0-  
TMDS RX0+  
TMDS Ground  
Floating  
Floating  
TMDS Ground  
TMDS Clock+  
TMDS Clock-  
Plug and Play Capability  
You can install the monitor in any Plug and Play compatible system. The monitor automatically provides the computer with its Extended Display Identification  
Data (EDID) using Display Data Channel (DDC) protocols so that the system can configure itself and optimize the monitor settings. Most monitor installations  
are automatic. You can select different settings if required.  
Flat Panel Specifications  
Model number  
Screen type  
Panel Type  
Dell S2240M monitor  
Active matrix - TFT LCD  
IPS  
Dell S2340M monitor  
Active matrix - TFT LCD  
IPS  
54.61 cm (21.5 inches) (21.5-inch viewable  
image size)  
58.42 cm (23 inches) (23-inch wide viewable  
image size)  
Screen dimensions  
Preset display area:  
Horizontal  
476.06 mm (18.76 inches)  
267.78 mm (11.85 inches)  
509.18 mm (20.05 inches)  
286.41 mm (11.28 inches)  
Vertical  
Pixel pitch  
0.248 mm  
0.265 mm  
Viewing angle  
Horizontal  
Vertical  
178 ° typical  
178 ° typical  
178 ° typical  
178 ° typical  
Luminance output  
Contrast ratio  
250 cd/m² (typical)  
250 cd/m² (typical)  
1,000 to 1 (typical)  
1,000 to 1 (typical)  
Dynamic Contrast Ratio  
Faceplate coating  
8,000,000 to 1 (typical) *  
Glare with hard-coating 3H  
8,000,000 to 1 (typical) *  
Glare with hard-coating 3H  
 
Backlight  
LED light bar system  
LED light bar system  
14 ms(typical)  
7 ms(typical) with Overdrive  
14 ms(typical)  
7 ms(typical) with Overdrive  
Response Time  
Color Depth  
Color Gamut  
16.7 mil colors  
16.7 mil colors  
82 % (typical) **  
82 % (typical) **  
* Based on estimation.  
** [S2240M/S2340M] color gamut (typical) is based on CIE1976 (82 %) and CIE1931 (72 %) test standards.  
Resolution Specifications  
Model number  
Dell S2240M monitor  
Dell S2340M monitor  
Scan range  
Horizontal  
Vertical  
30 kHz to 83 kHz (automatic)  
56 Hz to 76 Hz (automatic)  
30 kHz to 83 kHz (automatic)  
56 Hz to 76 Hz (automatic)  
Maximum preset resolution  
1,920 x 1,080 at 60 Hz  
1,920 x 1,080 at 60 Hz  
Electrical Specifications  
Model number  
Dell S2240M monitor  
Dell S2340M monitor  
Analog RGB: 0.7 Volts +/- 5 %, 75 ohm input  
impedance  
Analog RGB: 0.7 Volts +/- 5 %, 75 ohm input  
impedance  
Video input signals  
Separate horizontal and vertical synchronizations,  
polarity-free TTL level, SOG (Composite SYNC on  
green)  
Separate horizontal and vertical synchronizations,  
polarity-free TTL level, SOG (Composite SYNC on  
green)  
Synchronization input  
signals  
input  
Delta adapter ADP-40DD B: 100 VAC to 240 VAC / 50  
Delta adapter ADP-40DD B: 100 VAC to 240 VAC / 50  
Hz to 60 Hz + 3 Hz / 1.5 A (Max.), Lite-On adapter  
voltage / Hz to 60 Hz + 3 Hz / 1.5 A (Max.), Lite-On adapter  
frequency PA-1041-71 : 100 VAC to 240 VAC / 50 Hz or 60 Hz + PA-1041-71 : 100 VAC to 240 VAC / 50 Hz or 60 Hz +  
AC/DC  
Adapter*  
/ current 3 Hz / 1.2 A (Max.)  
3 Hz / 1.2 A (Max.)  
output  
voltage / OUTPUT: 12 VDC / 3.33 A  
current  
OUTPUT: 12 VDC / 3.33 A  
120 V: 30 A (Max.)  
240 V: 60 A (Max.)  
120 V: 30 A (Max.)  
240 V: 60 A (Max.)  
Inrush current  
* Qualified Compatible AC/DC adapters:  
CAUTION: To avoid damage to the monitor, use only the adapter designed for this particular Dell monitor.  
Manufacturer  
Model  
Polarity  
Delta  
ADP-40DD BA  
Lite-On  
PA-1041-71TP-LF  
This monitor comes equipped with a failsafe mechanism to shut down the monitor when a non-compliant power adapter is plugged in the DC socket.  
The following message will be displayed when the monitor has detected that a wrong power adapter is used.  
To avoid damage to the unit, user is strongly advised to use the original power adapter that comes packaged together with the monitor.  
Preset Display Modes  
The following table lists the preset modes for which Dell guarantees image size and centering:  
S2240M:  
Display Mode  
Horizontal Frequency  
(kHz)  
Vertical Frequency  
(Hz)  
Pixel Clock (MHz)  
Sync Polarity  
(Horizontal/Vertical)  
VESA, 720 x 400  
31.5  
31.5  
37.5  
37.9  
46.9  
48.4  
60.0  
67.5  
64.0  
80.0  
67.5  
70.0  
60.0  
75.0  
60.0  
75.0  
60.0  
75.0  
75.0  
60.0  
75.0  
60.0  
28.3  
25.2  
-/+  
-/-  
VESA, 640 x 480  
VESA, 640 x 480  
31.5  
-/-  
VESA, 800 x 600  
40.0  
+/+  
+/+  
-/-  
VESA, 800 x 600  
49.5  
VESA, 1,024 x 768  
VESA, 1,024 x 768  
VESA, 1,152 x 864  
VESA, 1,280 x 1,024  
VESA, 1,280 x 1,024  
VESA, 1,920 x 1,080  
65.0  
78.8  
+/+  
+/+  
+/+  
+/+  
+/+  
108.0  
108.0  
135.0  
148.5  
S2340M:  
Display Mode  
Horizontal Frequency  
(kHz)  
Vertical Frequency  
(Hz)  
Pixel Clock (MHz)  
Sync Polarity  
(Horizontal/Vertical)  
VESA, 720 x 400  
VESA, 640 x 480  
VESA, 640 x 480  
VESA, 800 x 600  
VESA, 800 x 600  
VESA, 1,024 x 768  
VESA, 1,024 x 768  
VESA, 1,152 x 864  
VESA, 1,280 x 1,024  
VESA, 1,280 x 1,024  
VESA, 1,920 x 1,080  
31.5  
31.5  
37.5  
37.9  
46.9  
48.4  
60.0  
67.5  
64.0  
80.0  
67.5  
70.0  
60.0  
75.0  
60.0  
75.0  
60.0  
75.0  
75.0  
60.0  
75.0  
60.0  
28.3  
25.2  
-/+  
-/-  
31.5  
-/-  
40.0  
+/+  
+/+  
-/-  
49.5  
65.0  
78.8  
+/+  
+/+  
+/+  
+/+  
+/+  
108.0  
108.0  
135.0  
148.5  
Physical Characteristics  
The following table lists the monitor's physical characteristics:  
Model Number  
Dell S2240M monitor  
Dell S2340M monitor  
D-subminiature, blue connector;  
DVI  
D-subminiature, blue connector;  
Connector type  
DVI  
Analog: attachable, D-Sub, 15 pins, shipped  
detached from the monitor  
Analog: attachable, D-Sub, 15 pins, shipped  
detached from the monitor  
Signal cable type  
Dimensions: (with stand)  
Height  
Width  
Depth  
380.28 mm (14.97 inches)  
499.10 mm (19.65 inches)  
175.80 mm (6.92 inches)  
398.90 mm (15.70 inches)  
532.20 mm (20.95 inches)  
175.80 mm (6.92 inches)  
Dimensions: (without stand)  
Height  
Width  
Depth  
297.60 mm (11.72 inches)  
499.10 mm (19.65 inches)  
37.80 mm (1.49 inches)  
316.20 mm (12.45 inches)  
532.20 mm (20.95 inches)  
37.80 mm (1.49 inches)  
Stand dimensions:  
Height  
137.10 mm (5.40 inches)  
175.80 mm (6.92 inches)  
175.80 mm (6.92 inches)  
137.10 mm (5.40 inches)  
175.80 mm (6.92 inches)  
175.80 mm (6.92 inches)  
Width  
Depth  
Weight:  
Weight with packaging  
4.60 kg (10.14 lb)  
3.69 kg (8.14 lb)  
0.60 kg (1.32 lb)  
4.95 kg (10.91 lb)  
3.91 kg (8.62 lb)  
0.60 kg (1.32 lb)  
Weight with stand assembly, cables,  
adapter, and dongle  
Weight of stand assembly  
Environmental Characteristics  
The following table lists the environmental conditions for your monitor:  
Model Number  
Dell S2240M monitor  
Dell S2340M monitor  
Temperature  
Operating  
0 ° C to 40 ° C (32 ° F to 104 ° F)  
0 ° C to 40 ° C (32 ° F to 104 ° F)  
Non-operating  
Storage: -20 ° C to 60 ° C (-4 ° F to 140 ° F)  
Shipping: -20 ° C to 60 ° C (-4 ° F to 140 ° F)  
Storage: -20 ° C to 60 ° C (-4 ° F to 140 ° F)  
Shipping: -20 ° C to 60 ° C (-4 ° F to 140 ° F)  
Humidity  
Operating  
Non-operating  
10 % to 80 % (non-condensing)  
10 % to 80 % (non-condensing)  
Storage: 5 % to 90 % (non-condensing)  
Shipping: 5 % to 90 % (non-condensing)  
Storage: 5 % to 90 % (non-condensing)  
Shipping: 5 % to 90 % (non-condensing)  
Altitude  
Operating  
5,000 m (16,405 ft) max  
12,192 m (40,000 ft) max  
5,000 m (16,405 ft) max  
12,192 m (40,000 ft) max  
Non-operating  
78.43 BTU/hour (maximum)  
61.38 BTU/hour (typical)  
81.84 BTU/hour (maximum)  
64.79 BTU/hour (typical)  
Thermal dissipation  
LCD Monitor Quality & Pixel Policy  
During the LCD Monitor manufacturing process, it is not uncommon for one or more pixels to become fixed in an unchanging state. The visible result is a  
fixed pixel that appears as an extremely tiny dark or bright discolored spot. When the pixel remains permanently lit, it is known as a "bright dot". Wh en the  
pixel remains black, it is known as a "dark dot".  
In almost every case, these fixed pixels are hard to see and do not detract from display quality or usability. A display with 1 to 5 fixed pixels is considered  
normal and within competitive standards. For more information, see Dell Support site at: support.dell.com.  
Maintenance Guidelines  
Caring for Your Monitor  
CAUTION: Read and follow the safety instructions before cleaning the monitor.  
CAUTION: Before cleaning the monitor, unplug the monitor power cable from the electrical outlet.  
For best practices, follow the instructions in the list below while unpacking, cleaning, or handling your monitor:  
To clean your antistatic screen, slightly dampen a soft, clean cloth with water. If possible, use a special screen-cleaning tissue or solution suitable for  
the antistatic coating. Do not use benzene, thinner, ammonia, abrasive cleaners, or compressed air.  
Use a slightly dampened, warm cloth to clean the plastics. Avoid using detergent of any kind as some detergents leave a milky film on the plastics.  
If you notice a white powder when you unpack your monitor, wipe it off with a cloth. This white powder occurs during the shipping of the monitor.  
Handle your monitor with care as a darker-colored monitor may scratch and show white scuff marks more than a lighter-colored monitor.  
To help maintain the best image quality on your monitor, use a dynamically changing screen saver and power off your monitor when not in use.  
   
Setting Up the Monitor  
Dell™ S2240M/S2340M Monitor User's Guide  
Attaching the Stand  
NOTE: The stand base and stand riser are detached when the monitor is shipped from the factory.  
1. Assemble the stand riser to stand base.  
a. Attach the stand riser to the stand base.  
b. Tighten the screw clockwise located on the base.  
2. Attach the stand assembly to the monitor:  
   
a. Place the monitor on a soft cloth or cushion near the edge of desk.  
b. Align the stand assembly bracket to the monitor groove.  
c. Insert the bracket towards monitor until it locks in place.  
Connecting Your Monitor  
WARNING: Before you begin any of the procedures in this section, follow the Safety Instructions.  
To connect your monitor to the computer:  
1. Turn off your computer and disconnect the power cable.  
2. Connect the blue (analog VGA) or DVI display connector cable to the corresponding video port on the back of your  
computer. Do not use both cables on the same computer. Use both the cables only when they are connected to two  
different computers with appropriate video systems.  
Connecting the Blue VGA Cable  
Connecting the monitor with DVI  
 
Organizing Your Cables  
After attaching all necessary cables to your monitor and computer, organize all cables as shown below:  
1. Insert cables into cable clip.  
2. Tie the cables together using the velcro strap that shipped with your monitor.  
 
Removing the Monitor Stand  
After placing the monitor panel on a soft cloth or cushion, complete the following steps to remove the base:  
1. Push the release button above the stand.  
2. While pushing the release button, pull the stand away from the monitor.  
 
Operating the Monitor  
Dell™ S2240M/S2340M Monitor User's Guide  
Power On the Monitor  
Press the  
button to turn on the monitor.  
Using the Right Side Panel Controls  
Use the keys on the Right side of the monitor to adjust the image settings.  
Right side panel Key  
A
Description  
Use the Preset modes key to choose from a list of preset color modes. See Using the OSD Menu.  
Preset modes  
B
Use the Brightness / Contrast key to direct access to the "Brightness" and "Contrast" control menu.  
Brightness / Contrast  
C
Use the Menu key to open the on-screen display (OSD).  
Menu  
D
Use the Exit key to exit on-screen display (OSD) from menu and sub-menus.  
   
Exit  
Right side panel Key  
Use the keys on the Right side of the monitor to adjust the image settings.  
Right side panel Key  
A
Description  
Use the Up key to adjust (increase ranges) items in the OSD menu.  
Up  
B
Use the Down key to adjust (decrease ranges) items in the OSD menu.  
Down  
C
Use the OK key to confirm your selection.  
OK  
D
Use the Back key to go back to the previous menu.  
Back  
Using the On-Screen Display (OSD) Menu  
Accessing the Menu System  
NOTE: If you change the settings and then either proceed to another menu or exit the OSD menu, the monitor automatically saves those changes. The changes are also  
saved if you change the settings and then wait for the OSD menu to disappear.  
1.  
Press the  
button to open the OSD menu and display the main menu.  
Main Menu  
2.  
3.  
Press the  
and  
buttons to toggle between options in the Menu. As you move from one icon to another, the option name is highlighted.  
button again.  
To select the highlighted item on the menu press the  
 
4.  
5.  
6.  
Press the  
Press the  
Select the  
and  
button to enter the slide bar and then use the  
to return to previous menu without accepting current settings or  
buttons to select the desired parameter.  
or  
buttons, according to the indicators on the menu, to make your changes.  
to accept and return to previous menu.  
The table below provides a list of all the OSD menu options and their functions.  
Icon  
Menu and Submenus  
Energy Use  
Description  
This meter shows the energy level being consumed by the monitor in real time.  
BRIGHTNESS/CONTRAST Use the Brightness and Contrast menu to adjust the Brightness/Contrast.  
Brightness  
Allows you to adjust the brightness or luminance of the backlight.  
Press the  
key to increase brightness and press the  
key to decrease brightness (min 0 ~ max 100).  
Contrast  
Allows you to adjust the contrast or the degree of difference between darkness and lightness on the monitor screen. Adjust brightness  
first, and adjust contrast only if you need further adjustment.  
Press the  
key to increase contrast and press the  
key to decrease contrast (min 0 ~ max 100).  
AUTO ADJUST  
Use this key to activate automatic setup and adjust menu. The following dialog appears on a black screen as the monitor self-adjusts to  
the current input:  
Auto Adjustment allows the monitor to self-adjust to the incoming video signal. After using Auto Adjustment, you can further tune your  
monitor by using the Pixel Clock (Coarse) and Phase (Fine) controls under Image Settings.  
NOTE: Auto Adjust does not occur if you press the button while there are no active video input signals or attached cables.  
INPUT SOURCE  
Use the Input Source menu to select between different video signals that may be connected to your monitor.  
Auto Select  
VGA  
Select Auto Select to scan for available input signals.  
Select VGA input when you are using the analog (VGA) connector. Push  
to select the VGA input source.  
to select the DVI input source.  
DVI  
Select DVI input when you are using the Digital (DVI) connector. Push  
COLOR SETTINGS  
Use the Color Setting menu to adjust the monitor's color settings.  
Input Color Format  
Preset Modes  
Allows you to set the video input mode to:  
RGB: Select this option if your monitor is connected to a computer or DVD player using the DVI cable.  
YPbPr: Select this option if your DVD player supports only YPbPr output.  
Allows you to choose from a list of preset color modes.  
Standard: Loads the monitor's default color settings. This is the default preset mode.  
Multimedia: Loads color settings ideal for multimedia applications.  
Movie: Loads color settings ideal for movies.  
Game: Loads color settings ideal for most gaming applications.  
Text: Loads color settings ideal for office environment.  
Warm: Increases the color temperature. The screen appears warmer with a red/yellow tint.  
Cool: Decreases the color temperature. The screen appears cooler with a blue tint.  
Custom Color: Allows you to manually adjust the color settings. Press the  
and  
keys to adjust the Red, Green, and Blue  
values and create your own preset color mode.  
In the Movie preset mode:  
Hue  
Allows you to adjust the skin tone of the image. Use  
or  
to adjust the hue from '0' to '100'.  
Saturation  
Allows you to adjust the color saturation of the image. Use  
or  
to adjust the saturation from '0' to '100'.  
Demo Mode  
Image Enhance  
Reset Color Settings  
You can launch the Demo Mode to identify the monitor display difference between Normal and Enhanced.  
The function will enhance the contours of the image.  
Resets your monitor's color settings to the factory defaults.  
Use the Displays Settings menu to adjust the monitor's display settings.  
DISPLAY SETTINGS  
Adjusts the image ratio as Wide 16:9, 4:3, or 5:4.  
Aspect Ratio  
Horizontal Position  
Vertical Position  
Sharpness  
NOTE: Wide 16:9 adjustment is not required at maximum preset resolution 1920 x 1080.  
Use the  
Use the  
or  
or  
buttons to adjust image left and right. Minimum is '0' (-). Maximum is '100' (+).  
buttons to adjust image up and down. Minimum is '0' (-). Maximum is '100' (+).  
This feature can make the image look sharper or softer. Use  
or  
to adjust the sharpness from '0' to '100'.  
Pixel Clock  
The Phase and Pixel Clock adjustments allow you to adjust your monitor to your preference. Use  
image quality.  
or  
buttons to adjust for best  
Phase  
If satisfactory results are not obtained using the Phase adjustment, use the Pixel Clock (coarse) adjustment and then use Phase (fine),  
again.  
Allows you to increase the level of contrast to provide sharper and more detailed image quality.  
Dynamic Contrast  
Reset Display Settings  
OTHER SETTINGS  
NOTE: Dynamic Contrast is not available (greyed out) in Energy Smart modes.  
Select this option to restore default display settings.  
Select this option to adjust the settings of the OSD, such as, the languages of the OSD, the amount of time the menu remains on screen,  
and so on.  
Language  
Allows you to set the OSD display to one of six languages: English, Spanish, French, German, Simplified Chinese, or Japanese.  
Allows you to adjust the OSD background from opaque to transparent.  
Menu Transparency  
Menu Timer  
Allows you to set the time for which the OSD remains active after you press a key on the monitor.  
Use the  
and  
keys to adjust the slider in 1 second increments, from 5 to 60 seconds.  
Menu Lock  
Controls user access to adjustments. When Lock is selected, no user adjustments are allowed. All buttons are locked.  
NOTE:  
Lock function – Either soft lock (through the OSD menu) or hard lock (press and hold the button above the power button for 10  
seconds)  
Unlock function– Only hard unlock (press and hold the button above the power button for 10 seconds)  
Energy Smart  
DDC/CI  
Dynamic dimming activated (The Dynamic dimming feature automatically reduces the screen-brightness level when the displayed image  
contains a high proportion of bright areas).  
DDC/CI (Display Data Channel/Command Interface) allows a software on your computer to adjust the monitor display settings like the  
brightness, color balance etc.  
Enable (Default): Optimizes the performance of your monitor and provides a better customer experience.  
Disable: Disables the DDC/CI option and the following message appears on the screen.  
 
This feature will help reduce minor cases of image retention.  
LCD Conditioning  
If an image appears to be stuck on the monitor, select LCD Conditioning to help eliminate any image retention. Using the LCD  
Conditioning feature may take some time. LCD Conditioning feature cannot remove severe cases of image retention or burn-in.  
NOTE: Use LCD Conditioning only when you experience a problem with image retention.  
The below warning message appears once user selects “Enable" LCD Conditioning.  
Factory Reset  
Personalize  
Resets all OSD settings to the factory preset values.  
Select this option allows you to set two shortcut keys.  
Shortcut Key 1  
User can select from "Preset Modes", "Brightness/Contrast", "Auto Adjust", "Input Source", "Aspect Ratio" and set as shortcut key.  
User can select from "Preset Modes", "Brightness/Contrast", "Auto Adjust", "Input Source", "Aspect Ratio" and set as shortcut key.  
Allows you to restore shortcut key to the default setting.  
Shortcut Key 2  
Reset Personalize  
OSD Warning Messages  
When the monitor does not support a particular resolution mode you will see the following message:  
This means that the monitor cannot synchronize with the signal that it is receiving from the computer. See Monitor Specifications for the horizontal and  
vertical frequency ranges addressable by this monitor. Recommended mode is 1,920 x 1,080.  
When the Energy Smart or Dynamic Contrast feature is enabled (in these preset modes: Game or Movie), the manual brightness adjustment is  
disabled.  
You will see the following message before the DDC/CI function is disabled.  
When the monitor enters the Power Save mode, the following message appears:  
Activate the computer and wake up the monitor to gain access to the OSD.  
If you press any button other than the power button the following messages will appear depending on the selected input:  
If VGA or DVI cable is not connected, a floating dialog box as shown below appears. The monitor will enter Power Save Mode in 5 minutes if left at this state.  
or  
See Troubleshooting for more information.  
Setting the Maximum Resolution  
To set the Maximum resolution for the monitor:  
Windows XP:  
1. Right-click on the desktop and select Properties.  
2. Select the Settings tab.  
3. Set the screen resolution to 1920 x 1080.  
4. Click OK.  
Windows Vista® ,Windows® 7 ,Windows® 8:  
1. For Windows® 8 only, select the Desktop tile to switch to classic desktop.  
2. Right-click on the desktop and click Screen Resolution.  
3. Click the Dropdown list of the Screen resolution and select 1920 x 1080.  
4. Click OK.  
If you do not see 1920 x 1080 as an option, you may need to update your graphics driver. Depending on your computer, complete one of the following procedures.  
If you have a Dell desktop or portable computer:  
Go to support.dell.com, enter your service tag, and download the latest driver for your graphics card.  
If you are using a non-Dell computer (portable or desktop):  
Go to the support site for your computer and download the latest graphic drivers.  
Go to your graphics card website and download the latest graphic drivers.  
Using the Tilt  
Tilt  
With the stand assembly, you can tilt the monitor for the most comfortable viewing angle.  
NOTE: The stand base is detached when the monitor is shipped from the factory.  
   
Troubleshooting  
Dell™ S2240M/S2340M monitor  
WARNING: Before you begin any of the procedures in this section, follow the Safety Instructions.  
Self-Test  
Your monitor provides a self-test feature that allows you to check whether your monitor is functioning properly. If your monitor and computer are properly  
connected but the monitor screen remains dark, run the monitor self-test by performing the following steps:  
1. Turn off both your computer and the monitor.  
2. Unplug the video cable from the back of the computer. To ensure proper Self-Test operation, remove both Digital (white connector) and the Analog (blue  
connector) cables from the back of computer.  
3. Turn on the monitor.  
The floating dialog box should appear on-screen (against a black background) if the monitor cannot sense a video signal and is working correctly.  
While in self-test mode, the power LED remains white. Also, depending upon the selected input, one of the dialogs shown below will continuously scroll  
through the screen.  
or  
4. This box also appears during normal system operation, if the video cable becomes disconnected or damaged. The monitor will enter Power Save Mode  
in 5 minutes if left at this state.  
5. Turn off your monitor and reconnect the video cable; then turn on both your computer and the monitor.  
If your monitor screen remains blank after you use the previous procedure, check your video controller and computer, because your monitor is functioning  
properly.  
Built-in Diagnostics  
Your monitor has a built-in diagnostic tool that helps you determine if the screen abnormality you are experiencing is an inherent problem with your monitor, or  
with your computer and video card.  
NOTE: You can run the built-in diagnostics only when the video cable is unplugged and the monitor is in self-test mode.  
     
To run the built-in diagnostics:  
1. Ensure that the screen is clean (no dust particles on the surface of the screen).  
2. Unplug the video cable(s) from the back of the computer or monitor. The monitor then goes into the self-test mode.  
3. Press and hold the Button 1 and Button 4 on the right side panel simultaneously for 2 seconds. A gray screen appears.  
4. Carefully inspect the screen for abnormalities.  
5. Press the Button 4 on the right side panel again. The color of the screen changes to red.  
6. Inspect the display for any abnormalities.  
7. Repeat steps 5 and 6 to inspect the display in green, blue, black, white, and text screens. The test is complete when the text screen appears. To exit,  
press the Button 4 again.  
If you do not detect any screen abnormalities upon using the built-in diagnostic tool, the monitor is functioning properly. Check the video card and computer.  
In-Store Demo  
To enter InStore OSD Mode  
All cables detached/disconnected. Monitor in “On” mode. Press and hold “menu” (Button 4) + “up” (Button 2) for 5 seconds  
To exit InStore OSD Mode  
Press power button once If power is cut off during demo, resume the demo after power is restored.  
Common Problems  
The following table contains general information about common monitor problems you might encounter and the possible solutions.  
Common Symptoms  
What You Experience  
Possible Solutions  
No Video/Power LED off  
No picture  
Ensure that the video cable connecting the monitor and the computer is properly connected  
and secured.  
Verify that the power outlet is functioning properly using any other electrical equipment.  
Ensure that the power button is depressed fully.  
No Video/Power LED on  
No picture or no brightness  
Increase brightness & contrast controls via OSD.  
Perform monitor self-test feature check.  
Check for bent or broken pins in the video cable connector.  
Ensure that the correct input source is selected via the INPUT SOURCE menu.  
Run the built-in diagnostics.  
Poor Focus  
Picture is fuzzy, blurry, or  
ghosting  
Perform Auto Adjust via OSD.  
Adjust the Phase and Pixel Clock controls via OSD.  
Eliminate video extension cables.  
Reset the monitor to Factory Settings.  
Change the video resolution to the correct aspect ratio (16:9).  
Shaky/Jittery Video  
Wavy picture or fine  
movement  
Perform Auto Adjust via OSD.  
Adjust the Phase and Pixel Clock controls via OSD.  
Reset the monitor to Factory Settings.  
Check environmental factors.  
Relocate the monitor and test in another room.  
Missing Pixels  
LCD screen has spots  
Cycle power on-off.  
Pixel that is permanently off is a natural defect that can occur in LCD technology.  
For more information on Dell Monitor Quality and Pixel Policy, see Dell Support site at:  
Stuck-on Pixels  
LCD screen has bright  
spots  
Cycle power on-off.  
Pixel that is permanently off is a natural defect that can occur in LCD technology.  
   
For more information on Dell Monitor Quality and Pixel Policy, see Dell Support site at:  
Brightness Problems  
Geometric Distortion  
Picture too dim or too  
bright  
Reset the monitor to Factory Settings.  
Auto Adjust via OSD.  
Adjust brightness & contrast controls via OSD.  
Screen not centered  
correctly  
Reset the monitor to Factory Settings.  
Auto Adjust via OSD.  
Adjust brightness & contrast controls via OSD.  
NOTE: When using 'DVI-D', the positioning adjustments are not available.  
Horizontal/Vertical Lines  
Synchronization Problems  
Screen has one or more  
lines  
Reset the monitor to Factory Settings.  
Perform Auto Adjust via OSD.  
Adjust Phase and Pixel Clock controls via OSD.  
Perform monitor self-test feature check and determine if these lines are also in self-test  
mode.  
Check for bent or broken pins in the video cable connector.  
NOTE: When using 'DVI-D', the Pixel Clock and Phase adjustments are not available.  
Screen is scrambled or  
appears torn  
Reset the monitor to Factory Settings.  
Perform Auto Adjust via OSD.  
Adjust Phase and Pixel Clock controls via OSD.  
Perform monitor self-test feature check to determine if the scrambled screen appears in  
self-test mode.  
Check for bent or broken pins in the video cable connector.  
Restart the computer in the safe mode.  
Safety-Related Issues  
Intermittent Problems  
Visible signs of smoke or  
sparks  
Do not perform any troubleshooting steps.  
Contact Dell immediately.  
Monitor malfunctions on &  
off  
Ensure that the video cable connecting the monitor to the computer is properly connected  
and is secured.  
Reset the monitor to Factory Settings.  
Perform monitor self-test feature check to determine if the intermittent problem occurs in  
self-test mode.  
Missing Color  
Wrong Color  
Picture missing color  
Picture color not good  
Perform monitor self-test feature check.  
Ensure that the video cable connecting the monitor to the computer is properly connected  
and is secured.  
Check for bent or broken pins in the video cable connector.  
Try different Color Preset Settings in Color Settings OSD. Adjust R/G/B value in Color  
Settings OSD if the Color Management is turned off.  
Change the Input Color Format to RGB or YPbPr in Color settings OSD.  
Image retention from a  
static image left on the  
monitor for a long period of appears on the screen  
time  
Faint shadow from the  
static image displayed  
Use the Power Management feature to turn off the monitor at all times when not in use (for  
more information, see Power Management Modes).  
Alternatively, use a dynamically changing screensaver.  
Product Specific Problems  
Specific Symptoms  
What You Experience  
Image is centered on screen,  
Possible Solutions  
Screen image is too small  
Reset the monitor to Factory Settings.  
but does not fill entire  
viewing area  
Cannot adjust the monitor  
with the buttons on the front  
panel  
OSD does not appear on the  
screen  
Turn off the monitor, unplug the power cord, plug back, and then turn on the monitor.  
Check if the OSD menu is locked. If yes, press and hold  
unlock. See Menu Lock.  
key for 10 seconds to  
No Input Signal when user  
controls are pressed  
No picture, the LED light is  
white. When you press "up",  
"down" or "Menu" key, the  
message " No input signal"  
will appear.  
Check the signal source. Ensure the computer is not in the power saving mode by  
moving the mouse or pressing any key on the keyboard.  
Check whether the signal cable is plugged in properly. Re-plug the signal cable if  
necessary.  
Reset the computer or video player.  
The picture does not fill the  
entire screen  
The picture cannot fill the  
height or width of the screen  
Due to different video formats (aspect ratio) of DVDs, the monitor may display in full  
screen.  
Run the built-in diagnostics.  
NOTE: When choosing DVI-D mode, the Auto Adjust function is not available.  
 
Appendix  
Dell™ S2240M/S2340M Monitor User's Guide  
WARNING: Safety Instructions  
WARNING: Use of controls, adjustments, or procedures other than those specified in this documentation may result in  
exposure to shock, electrical hazards, and/or mechanical hazards.  
For information on safety instructions, see the Product Information Guide.  
FCC Notices (U.S. Only) and Other Regulatory Information  
For FCC notices and other regulatory information, see the regulatory compliance website located at www.dell.com\regulatory_compliance.  
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:  
(1) this device may not cause harmful interference  
(2) this device must accept any interference received including interference that may cause undesired operation  
Contacting Dell  
For customers in the United States, call 800-WWW-DELL (800-999-3355).  
NOTE: If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, or  
Dell product catalog.  
Dell provides several online and telephone-based support and service options. Availability varies by country and product, and  
some services may not be available in your area. To contact Dell for sales, technical support, or customer service issues:  
1. Visit support.dell.com.  
2. Verify your country or region in the Choose A Country/Region drop-down menu at the bottom of the page.  
3. Click Contact Us on the left side of the page.  
4. Select the appropriate service or support link based on your need.  
5. Choose the method of contacting Dell that is convenient for you.  
       

HP Hewlett Packard Hewlett Packard Computer Monitor L1740 17 User Manual
GE 2 9765 User Manual
Garland Thermostat Control Griddle RGTSA 2424 1 User Manual
DeLonghi AS40U User Manual
Bosch Appliances Convection Oven HBL54 User Manual
Asus Z9PE D8 WS User Manual
Asus P5N D User Manual
AOC Computer Monitor E2237FWH User Manual
AG Neovo Neovo H W22 User Manual
Aga Ranges Legacy 1200 CFM User Manual