Daewoo GB20F8T2 User Manual

Instruction manual  
Colour televideo  
/
VIDEO AUDIO  
REC  
STAND-BY POWER  
REC  
PR  
GB14F8T1  
GB20F8T2  
GB21F1T2  
W O R T H  
k n o w i n g  
Please keep the video machine’s guarantee card and receipt safe for warranty  
purposes.  
Precautions  
Read carefully through this manual to familiarise yourself with this high-  
quality televideo.  
Make sure the rating of your household electricity supply matches that shown  
on the back of the televideo.  
Refer to this chapter and the “Initial installation” chapter (pages 4-9) to help  
you install and adjust your televideo.  
Do not…  
expose the televideo to high levels of humidity and heat, to avoid the risk of  
fire and electric shock.  
open the televideo. Have a qualified technician carry out repairs.  
connect the televideo to the power supply if you have just moved it from a  
cold to warm environment. This can result in condensation inside the recorder  
and cause serious damage to the machine and cassettes. Wait around two  
hours to allow it to reach room temperature.  
Make sure…  
the televideo is placed on a steady, flat surface.  
you place the televideo where there is good ventilation all around.  
you clean the televideo only with a soft, lint-free cloth; do not use aggressive  
or alcohol-based cleaning agents. (Unplug the set from the mains)  
you disconnect the power supply if the televideo appears to be working  
incorrectly, is making an unusual sound, has a strange smell, has smoke  
emitting from it or liquids have got inside it.  
Have a qualified technician check the televideo.  
you disconnect the power supply and aerial if you will not be using the  
televideo for a long period or during a thunderstorm.  
The power cable must be fitted with a fused plug approved by  
ASTA or BSI to BS 1362 and provided with a 5A fuse.  
The fuse cover must always be securely replaced. If the televideo is  
not worikng, the fuse may need replacing (see also “Electrical  
Connection” on page 4). (U.K. Only)  
5A  
For your own safety!  
There are no components in this televideo you can service or  
repair yourself.  
Do not open the case of the televideo. Only allow qualified  
personnel to repair or service your set.  
This televideo is designed for continuous operation. Switching it  
off does not disconnect it from the mains (stand-by). To  
disconnect it from the mains, you have to unplug it.  
Recording any copyright protected material may infringe a  
copyright.  
NOTE : If the receiver is moved or placed in a different direction, the main power switch must be  
switched off for at least 15 minutes in order to take out colour purity errors on the screen.  
W O R T H  
Before doing anything with the televideo, please  
read the chapter “Initial installation”.  
k n o w i n g  
Contents  
Controls  
The remote control unit  
The televideo, On-screen display  
2
3
Initial installation  
Moulded plugs  
4
Connecting up the televideo, Fitting the remote control’s batteries  
Setting time and date  
6
7
Tuning in stations, EDIT, Manual Tuning  
8~10  
Playing cassettes  
Playing back  
Still, Variable picture search, Continuous play  
12  
13  
Recording cassettes  
Simple recording, One touch recording (OTR)  
Timer recording using VideoPlus+  
14  
15  
When record time overlaps, Watching Programmes while recording  
Normal timer recording  
16  
17  
Timer Review-erasing or changing  
18~19  
More functions  
Accessing the beginning of the next recording,Accessing the beginning of the previous  
recording, Resetting the counter to zero, Accessing counter zero position  
Cassettes, V-Lock, Child Lock, Mute  
Picture adjustments, picture type selection, Changing on-screen displays  
Television timer, Snooze automatic  
VideoPlus+ guide numbers  
Teletext, teletext character set  
20  
21  
22  
23  
24  
25  
Connections and copying  
copying, Assembling  
Scart socket  
26  
27  
Appendix  
Before you ask a specialist  
Playing back, Simple recording, Auto tracking, One touch recording  
Index, Technical data  
28  
29  
30  
Your product guarantee  
31/32  
On the following pages, the pictures show the buttons you press on the remote control to  
perform the function, and what you should see in the on-screen display or machine  
display (if present)  
VideoPlus+ is a trademark applied for by Gemstar Development Corp.. The VideoPlus+  
system is manufactured under license from Gemstar Development Corporation.  
1
The remote control is the principle means of control, but the main playback and  
record functions are also available on the front of the machine.  
Press the main power switch on the front panel to turn on the set,  
then press  
button.  
CON TROLS  
The remote control unit  
TV stations-input sockets  
To switch combined TV/video on and off (stand by)  
to reset the counter  
max. 7 m  
30˚ | 30˚  
to wind the cassette to counter position 0:00:00to  
Record monitoring (only 2Tuners Model), Auto tracking  
to select on-screen displays  
Sound on/off  
a button for selecting input sources for recording:  
Volume up/down  
V-lock up/down  
To select channels and adjust  
Manual tracking up/down  
Teletext page up/down  
playback start/stop.  
pause while recording,  
still while playing back  
rewinding/fast forwarding a cassette from Stop, or  
picture search backwards/forwards from playback mode  
the menu control.  
the controls for timer recording using the VideoPlus+  
codes via on-screen display  
Teletext on/off  
Teletext size  
the record or OTR button  
(One Touch Recording means : each time you press the  
button recording is extended by 30 minutes)  
FAVOURITE/NORMAL1/NORMAL2  
a button that doubles the maximum recording time for  
very long recordings (SP/LP) : (only U.K. Model)  
button for the sleep timer (press repeatedly)  
2
Press the main power switch on the front panel to  
turn on the set, then press POWER( ) button.  
C O N T R O LS  
The televideo  
/
VIDEO AUDIO  
REC  
STAND-BY POWER  
REC  
PR  
Remote  
sensor  
HEAD  
PHONE  
Video input  
Audio input  
MAIN POWER  
SWITCH  
PLAY : Play  
Indicator  
VOLUME Down/Up Buttons  
PROGRAM Down/Up Buttons  
STAND BY : STAND BY(Red)  
POWER : Operation(Green)  
REC : Record(Yellow)  
STOP/EJECT:  
To stop and to eject  
the loaded cassette  
REC : Record  
REW / FF:  
Rewind and Fast forward wind  
On-screen display  
MAIN MENU  
PICTURE  
TV TIMER  
REW  
– 0:01:33  
01 ABCC  
TV TIMER  
01:01:1997 WED  
DATE  
TIME  
02:30  
RECORD TIMER  
PRESET  
MISCELLANEOUS  
ON TIMER  
PR  
OFF TIMER  
06:00 OFF  
01  
00:00 OFF  
SELECT  
MOVE  
CLEAR  
EXIT  
SELECT  
ENTER  
EXIT  
example  
CLEAR  
MENU  
SP  
MENU  
The televideo’s menu system  
gives you easy-to-understand  
access to the less used  
functions such as tuning to  
stations, clock setting and  
more.  
In addition, some other  
functions appear on screen if  
you want (press RECALL up  
to 3 times for on-screen  
displays).  
The menus show you which  
button to press for the next  
step.  
NOTE : The combined TV/video close menus automatically after approx. 1 minute.  
if no entry is made.  
3
I n i t i a  
l
For your own safety read the following instructions carefully before attempting to  
connect this unit to mains.  
INSTALLATION  
Moulded plugs  
Should it be necessary to remove a moulded on plug from the mains cable, it  
should be cut off and replaced with a suitable replacement.  
If the terminals in the plug are unmarked or you are in any doubt as to the correct  
connections, consult a qualified electrician.  
The wires in this mains lead are coloured in accordance with the following  
code  
Blue  
Brown  
Neutral  
Live  
As the colour of the wires in the mains lead of this appliance may not  
correspond with the coloured markings identifying the terminals in your  
replacement plug proceed as follows.  
The wire which is coloured blue must be connected to the terminal which is  
marked with letter N or coloured black.  
The wire which is coloured brown must be connected to the terminal which is  
marked with letter L or coloured red.  
The moulded plug cannot be used for any other appliance, therefore remove  
the fuse and dispose immediately and safely to prevent anyone, especially  
children from plugging it in to a wall socket, which will create a safety  
hazard.  
After replacement of the fuse in the moulded plug, the fuse cover must be  
refitted. If the fuse cover is lost a replacement cover must be obtained. The  
colour of the correct replacement fuse cover is that of the coloured insert in  
the base of the plug or the colour that is embossed in words in the base of  
the plug recess or elsewhere on the plug. Always state this colour when  
ordering a replacement fuse cover.  
Only 5 amp. replacement fuses which are ASTA approved to BS 1362 should  
be fitted. (U.K. Only)  
We recommend the use of a good quality plug.  
4
I n  
i
t
i
a
l
INSTALLATION  
This symbol means that this unit is double insulated, an earth connection is not  
necessary.  
Caution :  
To prevent electric shock, do not remove any covers.  
Caution :  
No user serviceable parts inside, refer servicing to qualified service personnel.  
Caution :  
When operating this unit on 220-240V mains supply, please note that when the power  
switch is in the off mode, the unit is not disconnected from the mains supply. However,  
please be assured that it is perfectly safe to leave the unit connected to the mains supply.  
5
Place your televideo  
horizontally on a flat, steady base so that air can circulate around it for ventilation.  
away from humidity and heat, magnetic fields, such as those from loudspeakers  
etc., and with no heavy objects placed on top.  
I n i t i a  
l
INSTALLATION  
Connecting up the televideo  
Switch off all components when connecting or disconnecting cables.  
Plug the aerial cable into the “ANT” socket of the televideo.  
Make sure the rating of the household mains supply matches the rating  
shown on the back of the televideo.  
Now plug in the mains lead.  
Fitting the remote controls batteries  
Remove the battery cover  
1on the reverse side of the  
remote control.  
Install two barreries  
(“AAA” size) into the  
remote control.  
Replace the battery  
cover.  
2
3
Fit the batteries, size 1.5V AAA as shown above.  
Protect your environment by returning used batteries to your dealer. Since  
batteries contain toxic substances they require special disposal methods.  
The buttons to use  
are marked on the  
following pages.  
Make sure the batteries are always of the same type and age, and remove  
them from the remote control if you are not using it for a long period.  
6
I n  
i
t
i
a
l
Timer controlled events require the exact time  
and the correct date.  
Press the main power switch on the front panel  
to turn on the set, then press button.  
INSTALLATION  
Setting time and date  
01 ARD  
Switch your televideo on.  
MAIN MENU  
PICTURE  
TV TIMER  
RECORD TIMER  
PRESET  
MISCELLANEOUS  
Call the televideo’s MAIN MENU.  
SELECT  
ENTER  
EXIT  
MENU  
MAIN MENU  
PICTURE  
TV TIMER  
RECORD TIMER  
PRESET  
MISCELLANEOUS  
Move the cursor down to the “TV TIMERline.  
Confirm by pressing the ENTER/STOP button.  
SELECT  
ENTER  
EXIT  
MENU  
TV TIMER  
01:01:1997 WED  
DATE  
TIME  
02:30  
ON TIMER  
PR  
OFF TIMER  
06:00 OFF  
01  
00:00 OFF  
Set the numbers for the exact time and the correct  
date. Both the On timer and the off timer can be  
switched ON or OFF but both must be on to enable the  
timer to function.  
SELECT  
MOVE  
CLEAR  
EXIT  
CLEAR  
MENU  
DATE : dd/mm/yy  
TIME : Hour/Min  
Store leaving “TV TIMER”  
Continue with the following page.  
Mistake or change ?  
Move curson to the position you wish to correct by using  
the remote control.  
/
/
and RE-ENTER on  
If you do not set ‘DATE’ and ‘TIME’ menu, you can not set ‘on/off Timer’.  
7
I n i t i a  
l
Have handy a TV guide or newspaper to help you to identify the stations.  
INSTALLATION  
Tuning in stations  
01 ARD  
(If you see “AV” instead of “PR, press  
the  
button)  
MAIN MENU  
PICTURE  
TV TIMER  
RECORD TIMER  
PRESET  
MISCELLANEOUS  
If not on-screen, call the televideo’s  
“MAIN MENU”.  
SELECT  
ENTER  
EXIT  
MENU  
AUTOMATIC TUNING SYSTEM  
Select the PRESET menu at the MAIN MENU.  
Place the cursor to “ATSS” with the up/down button.  
Press the ENTER button until the tunning screen appears above the PRESET  
menu.  
The cursor will move from left to right on the VHF-L line, then VHF-H, then UHF.  
Please wait until the EDIT menu appears.  
ATSS SETTING  
PR08  
UHF  
MENU  
EXIT  
8
I n  
i
t
i
a
l
INSTALLATION  
EDIT  
The EDIT menus shows you the programme position assignment.  
You can change this programme position assingment according to  
your personal preferences.  
(MAIN MENU PRESET EDIT)  
EDIT  
PR NAME SKIP PR NAME SKIP  
00 ------ YES 05 ------ NO  
01 ------ YES 06 ------ NO  
02 ------ YES 07 ------ NO  
03 ------ YES 08 ------ NO  
04 ------ YES 09 ------ NO  
SKIPPING THE CHANNELS  
SELECT  
DELETE  
SWAP  
SKIP  
You can select skip “YES” or “NOwith the SKIP button.  
A programme marked with SKIP “YES” is skipped when changing  
NAME  
MENU  
EXIT  
channel using the  
/
button .  
A skipped programme number selected by NUMBER button 0…9  
will be displayed in red.  
DELETE PROGRAMME POSITION DATA  
Position the cursor to programme number to delete with the  
up/down. LEFT/RIGHT buttons.  
Press the DELETE button. while this is being carried out the “DELETE  
pro.NO. appears and the “deleted” programme number will  
transfer to programme no.69 and change skip to “yes”.  
Any programme that was in No.69 will be transferred to programme  
No.68.  
EDIT  
---- CH5 RTL1 KABE N3  
BBC1 SAT RTL2 3SAT SWF3  
BBC2 ARD SAT1 1PLU SFB3  
ITV ZDF PRO7 BR3 MDR3  
CH4 WDR3 PREM HR3 RB3  
SELECT  
ENTER  
EXIT  
MENU  
CHANGING THE ORDER OF THE CHANNELS  
Position the cursor to programme number to move and press the  
SWAP button. The “SWAP P01 TO P01” will appear.  
Position the cursor to programme number to exchange and press the  
SWAP button. Two programmes will be exchanged.  
ENTER A STATION NAME  
Press the stop button at the EDIT MODE.  
station name tables appears above the screen.  
Select station name in the station name list with  
press ENTER button.  
If you want to delete a station name, select “-----”.  
If you can’t find the desired name in the list, you can enter your  
own.  
EDIT  
/
button and  
A - - -  
SELECT  
CHANGE  
ENTER  
EXIT  
MENU  
To do so, move the cursor to the “----” and press ENTER button.  
Using the  
/
button, select the desired, letter, number or blank.  
Press the button to select the next position.  
9
I n i t i a  
l
INSTALLATION  
Manual Tuning  
You can also call up the PRESET menu at the  
MAIN MENU.  
MANUAL TUNING  
PR  
SKIP  
SEARCH  
STATION NAME  
STORE TO  
08  
NO  
UP  
----  
PR08  
Press the NUMBER Button 0…9 or PR  
/
button to select a programme number you want.  
The screen will change according to the selected  
programme number.  
SELECT  
MOVE  
EXIT  
MENU  
SEARCHING FOR A CHANNEL  
Locate the cursor to SEARCH UP or DOWN with  
/
button at the MANUAL TUNING SCREEN  
and then press the enter.  
The tuning screen will appear and the cursor will  
move from left to right.  
To stop searching, press the MENU button.  
Pressing and holding down the  
during 3seconds, the band will change as  
following.  
/
button  
MANUAL TUNING  
PR08  
UHF  
CHANGE  
EXIT  
MENU  
VHF-L  
VHF-H  
UHF  
After locating a station, press the menu button.  
Select station name and memorize programme  
number with UP/DOWN button or the NUMBER  
button 0…9.  
use  
/
button to set the SKIP to NO’  
Press the “enter” key when the cursor is put on  
the “STORE TO, it is possible to memorise the  
searched channel.  
If you want to select “SKIP YES” PR. use the  
digit key.  
FINE TUNING  
If you are unable to get a good picture or sound  
because of a poor broadcasting signal, it is  
possible to adjust the fine tuning.  
Select the FINE TUNING at the PRESET MENU  
and FINE TUNING SCREEN will appear.  
FINE TUNING  
PR08  
UHF  
|||||||||||||||||| |||||||||||||||||||||  
|
CHANGE  
ENTER  
Press  
/
button to get a good picture and  
sound you want and to memorize press the  
ENTER.  
10  
11  
P L A Y I N G  
c a s s e t t e s  
Your televideo is swiched on by the main power switch on the front panel and by  
the button.  
Playing back  
Load the cassette by pushing it  
smoothly and squarely into the  
cassette bay, with its windows  
pointing up.  
PLAY  
0:00:00  
Start playback.  
STOP  
0:00:00  
Stop playback.  
01 BBC1  
03 ITV  
03 ITV  
EJECT  
Eject the cassette.  
FF  
0:15:00  
Fast forward or rewind the cassette  
from stop.  
REW  
0:09:00  
A smaller picture may be seen while switching from the  
SEARCH mode to the PLAYBACK mode.  
This is NOT a sign of malfunction.  
When you load a protected cassette (e.g. pre-recorded film,  
see page 21) playback starts automatically.  
PLAY ( ) switches back to normal playback.  
During still, or search, you don’t hear the sound.  
If the still picture is jittering, you can steady it by using the  
VOL/V-LOCK buttons.  
You can reduce horizontal interference stripes resulting from  
inaccurate tracking (when playing tapes of poor quality or  
recorded on other machines) by using the PR/TRK buttons during  
playback or try auto tracking using A.TRK  
After approx. 5 minutes in still, the cassette plays back  
automatically.  
Search and picture functions -page 20.  
12  
P L A Y I N G  
c a s s e t t e s  
Still  
Still picture from playback.  
Each press of the button advances the picture one frame.  
STILL  
0:00:00  
PLAY ( ) switches back to normal playback.  
Variable picture search  
Starting from playback you can control search speed in 2  
CUE  
steps either forwards (  
repeatedly.  
) or backwards (  
). Press  
0:10:00  
PLAY ( ) switches back to normal playback.  
REV  
0:09:00  
Continuous play  
MAIN MENU  
PICTURE  
TV TIMER  
RECORD TIMER  
PRESET  
MISCELLANEOUS  
Call the televideo’s“MAIN MENU”.  
SELECT  
ENTER  
EXIT  
MENU  
MISCELLANEOUS  
CHILD LOCK  
CHARACTER SET WEST  
AUTO REPEAT ON  
VIDEOPLUS PRESET  
Move the cursor down to the “AUTO REPEAT ON” line.  
Confirm.  
SELECT  
CHANGE  
EXIT  
MENU  
Cassettes with…  
…open safety hole:  
play end of cassette  
rewind  
rewind  
play…  
play…  
REP  
00:25:33  
…closed safety hole :  
play end of cassette  
NOTE : This set has the function of NTSC playback. (SP tape only)  
13  
Do not use NTSC SLP (x3) tape.  
RECORDING  
c a s s e t t e s  
The TV stations on your televideo have been tuned in (pages 8/9).  
The televideo is switched on.  
Simple recording  
Load a cassette with its safety tab in  
place (see page 21).  
Choose the station whose  
programme you want to record.  
01AB  
STOP  
0:00:00  
12CD  
12CD  
STOP  
0:00:00  
If the programme you wish to record  
is very long, double the possible  
recording time with “LP” (Long Play).  
Up to eight hours with an E240  
cassette.  
LP  
12CD  
12CD  
REC  
0:00:12  
Start your recording.  
12CD  
12CD  
PAUSE  
0:10:34  
If you wish to interrupt recording  
briefly – then continue.  
STOP  
1:15:22  
Stop your recording.  
One touch recording-OTR  
Choose the station you want and  
press the button once for every 30  
minutes of programme you wish to  
record.  
12CD  
OTR  
0:01:10  
0:30  
OTR PREPARATION  
Before setting OTR, MAKE SURE THAT …  
The cassette tape has the safety tab.  
The tape is long enough to record the program.  
During recording you can switch the screen off pressing button.  
If you want to record from a source connected to your video  
see page 26.  
Even if you turn off the POWER, REC/OTR will continue for the rest  
of the time.  
You can release the OTR mode by pressing “STOP” during REC mode.  
The video stops automatically, if pause exceeds five minutes.  
If the display shows “AV” instead of “PR” press button.  
Search and picture functions -pages 20.  
14  
For timer recordings, clock, date, and stations  
must be set correctly (pages 7-9).  
Load a cassette with its safety tab in place (see  
page 21) and with sufficient free space for the  
recording.  
RECORDING  
c a s s e t t e s  
Timer recording using VideoPlus+  
VIDEOPLUS  
Call the VideoPlus+ menu.  
NO---------  
INTERVAL  
ONCE  
From your TV magazine, type in the number next to the  
programme you want to record.  
0-9  
DIGIT  
INTERVAL  
ENTER  
EXIT  
VIDEOPLUS  
VIDEOPLUS  
Select to record  
ONCE, DAILY(1x), WEEKLY(2x)  
NO 58624 -----  
INTERVAL  
DAILY  
Confirm  
0-9  
DIGIT  
INTERVAL  
ENTER  
EXIT  
VIDEOPLUS  
REC EVENT 1  
INTERVAL  
PDC  
DAILY  
OFF  
DATE  
21/01 TUE  
16:30  
16:35  
02  
If you want to extend the recording time by 1 minutes  
steps.  
START  
END  
PR  
SPEED  
SP  
SELECT  
MOVE  
EXIT  
MENU  
RECORD TIMER  
DATE START END PR PDC  
1
2
3
4
5
6
DAILY 16:30 16:46 02 OFF  
--/-- --:-- --:-- --:-- ---  
--/-- --:-- --:-- --:-- ---  
--/-- --:-- --:-- --:-- ---  
--/-- --:-- --:-- --:-- ---  
--/-- --:-- --:-- --:-- ---  
Press the menu button to confirm.  
SELECT  
ENTER  
CLEAR  
EXIT  
CLEAR  
MENU  
You can switch your televideo off.  
(Do not use the main power button on the front panel of the set.) The televideo will switch  
on and off automatically to record the timer event.  
If you do not set the clock, when you press the VideoPlus+ button to set the timer recording,  
this set automatically changes to the “TV TIMER” menu.  
If you don’t have the VideoPlus+ numbers see page 17 for the normal timer.  
If you have made a mistake, move back to the relevant position with the  
button and  
change the setting.  
During recording you can switch the screen off pressing  
button.  
The screen will indicate if the station is not programmed (pages7~9) or if the station has no  
VideoPlus+ guide number (pages 24).  
Should programmings overlap, you get a warning.  
In the case of error messages correct the input or check the date and time on your televideo  
(also check your TV guide).  
15  
RECORDING  
c a s s e t t e s  
When record time overlaps  
When setting the Programmable Timer, be careful not to overlap the preset  
times.  
If you happen to overlap the preset Programs, the END Time has priority and the  
overlapped Programmes cannot be recorded.  
19:00  
20:00  
21:00  
22:00  
PROGRAMME 1  
PROGRAMMING  
RECORDING  
PROGRAMME 2  
PROGRAMME 3  
PROGRAMME 1  
NOT RECORDED  
PROGRAMME 2 PROGRAMME 3  
NOTE :  
MAKE SURE THAT …  
The clock is adjusted to current time  
The safety tab is not missing on the cassette tape.  
The tape is long enough to record the desired programme.  
* If you program events without setting the time, it will be automatically  
returned to “TV TIMER” mode.  
If you program events that overlap, at least one of your events will not record  
correctly.  
If the start time you want to enter does not correspond to the PDC-time or if you  
just want to record a part of a programme, you have to switch off PDC. Otherwise  
the recorder won’t record.  
Watching programmes while recording (Only 2 Tuners Model)  
Just switch over to another  
01 ARS  
02 KBS  
REC  
0:00;05  
programme using PR/PAGE  
or the NUMBER BUTTONS.  
/
To check the recording switch to  
the recorder (and back) using the  
MONITOR/A.TRK button.  
REC PR  
02 KBS  
REC  
0:02:12  
16  
For timer recordings, clock, date, and stations must be  
set correctly (page 7-9).  
Load a cassette with its safety tab in place (see page  
21) and with sufficient free space for the recording.  
To enter station numbers using the number buttons,  
type double digit numbers quickly.  
RECORDING  
c a s s e t t e s  
Normal timer recording  
RECORD TIMER  
DATE START END PR PDC  
1
2
3
4
5
6
DAILY 16:30 16:46 02 OFF  
--/-- --:-- --:-- --:-- ---  
--/-- --:-- --:-- --:-- ---  
--/-- --:-- --:-- --:-- ---  
--/-- --:-- --:-- --:-- ---  
--/-- --:-- --:-- --:-- ---  
Call the televideo’s “MENU, choose “RECORD TIMER”  
SELECT  
ENTER  
CLEAR  
EXIT  
CLEAR  
MENU  
select a free timer memory.  
If necessary erase a memory with clear button.  
Confirm.  
Set:  
ONCE/DAILY/WEEKLY”  
REC EVENT 1  
INTERVAL  
PDC  
DAILY  
OFF  
the date (if not today’s),  
start and stop time,  
DATE  
21/01 TUE  
16:30  
16:35  
02  
START  
END  
PR  
SPEED  
SP  
station number (or AV, e.g. for satellite stations) and  
the recording speed  
SELECT  
MOVE  
EXIT  
MENU  
Close the menu.  
You can switch your televideo off.  
(Do not use the main power button on the front panel of  
the set.)  
The televideo will switch on and off automatically to  
record the timer event.  
If you have made a mistake, move to the position you want to change using the  
buttons and change the setting.  
/
,
/
The recorder will eject cassettes which have the safety tab removed (page 21).  
During recording you can switch the screen off pressing button.  
Press to use your televideo in the meantime.  
17  
RECORDING  
c a s s e t t e s  
Timer Review - erasing or changing  
Call the televideo’s “MENU,  
choose “RECORD TIMER.  
RECORD TIMER  
DATE START END PR PDC  
1
2
3
4
5
6
DAILY 16:30 16:46 02 OFF  
--/-- --:-- --:-- --:-- ---  
--/-- --:-- --:-- --:-- ---  
--/-- --:-- --:-- --:-- ---  
--/-- --:-- --:-- --:-- ---  
--/-- --:-- --:-- --:-- ---  
Select the programming to erase  
or change.  
If you want to erase this  
programming press button  
CLEAR.  
SELECT  
ENTER  
CLEAR  
EXIT  
CLEAR  
MENU  
If you wish to make changes :  
Confirm.  
REC EVENT 1  
INTERVAL  
PDC  
DAILY  
OFF  
DATE  
21/01 TUE  
16:30  
16:35  
02  
START  
END  
PR  
Move to the position you want to  
SPEED  
SP  
change using the  
buttons.  
/
,
/
SELECT  
MOVE  
EXIT  
MENU  
Change the settings using the  
or number buttons.  
/
If all setting are ok, exit the  
menu.  
18  
RECORDING  
c a s s e t t e s  
PDC will not operate if you are not watching the programme you have set on the timer record  
function, although you set timer recording using PDC function your TV/VCR does not operates  
‘PDC timer recording’ but operates ‘normal timer recording’.  
If you wish to record from a satellite receiver select under “PRthe satellite programme  
location or AV (depending on the connection with the antenna cable, the SCART-cable). Leave  
the satellite tuner switched on and to the programme you want.  
19  
Your televideo automatically sets electronic marker (index) at the beginning of  
each recording and timer recording. It is these markers which the index function  
detects.  
M
O
R
E
f u n c t i o n s  
Accessing the beginning of the next recording  
FF  
0:00:00  
VISS 03  
01 BBC1  
Press the button depending on the  
number of recordings (index marks)  
that you wish to wind forward.  
E.g. 3x for 3 recordings ahead.  
SP  
Accessing the beginning of the previous recording  
REW  
0:00:00  
VISS-03  
01 BBC1  
Press the button depending on the  
number of recordings (index marks)  
that you wish to wind backwards.  
E.g. 3x for 3 recordings back.  
SP  
Resetting the counter to zero  
REC  
0:00:00  
Reset the counter.  
SP  
Accessing counter zero position  
01 BBC1  
REW  
0:00:08  
GOTO ZERO  
The video will wind to the position  
0:00:00 and stop.  
SP  
When you have finished recording or playing, you can easily return  
to the point marked in this way.  
20  
M O R E  
f u n c t i o n s  
Cassettes  
Use only good quality tape cassettes with the VHS logo.  
Keep cassettes away from excessive moisture or dust, magnetic and  
electrical fields (loudspeakers and computer monitors, for example).  
Always wind the tape to the beginning when you have finished. Store  
with the full spool at the bottom and with the cassette in its cover.  
You can protect your precious recordings from being wiped by breaking  
out the safety tab on the side of the cassette (some cassettes have a  
slide).  
Should you wish to re-use the tape after removing the tab, cover the hole  
with adhesive tape.  
Recording/Playback Time of Video Type  
Maximum Recording/Playback Time  
Type  
SP Mode  
(Standard Play)  
LP Mode  
(Long Play)  
E-30  
E-60  
E-90  
E-120  
E-180  
E-240  
30min  
1 hour  
1 hour 30 minutes  
2 hours  
1 hour  
2 hours  
3 hours  
4 hours  
6 hours  
8 hours  
3 hours  
4 hours  
V-Lock  
When changing to STILL mode while the tape is playback, the vertical  
synchronization may sometimes be shaked according to the tape  
condition. At this time, use this key for the better picture screen.  
Child Lock  
Choose “MISCELLANEOUS” of “MAIN MENU”.  
CHILD LOCK  
ENTER NUMBER  
TO LOCK  
You can prevent use of the TV set without the remote control.  
The set is child-locked after you input any four figure secret number  
subsequently the TV picture will be overlaid with the words child locked  
and the sound will be muted.  
- - - -  
ENTER  
Mute  
Pressing the MUTE( ) button once turns the sound off. The sound returns if button is pressed once more.  
The mute maintains when you press PR  
/
21  
M
O
R
E
f u n c t i o n s  
Picture adjustments  
MAIN MENU  
PICTURE  
TV TIMER  
Call up the televido’s “MAIN  
MENU”.  
RECORD TIMER  
PRESET  
MISCELLANEOUS  
SELECT  
ENTER  
EXIT  
MENU  
Choose “PICTURE.  
PICTURE  
31  
63  
48  
35  
What do you want to adjust?  
brightness  
SELECT  
CHANGE  
EXIT  
contrast  
MENU  
colour  
sharpness  
Adjust.  
Close the menu.  
Picture type selection  
When you press the NORMAL button repeatedly you can call  
up three picture setting;  
for NORMAL 1 (hard picture), NORMAL 2 (soft picture).  
FAVOURITE (adjustable picture).  
The last set value is automatically stored in FAVOURITE  
mode.  
Note that if you set the brightness and contrast values too  
low, the on-screen-display become dark.  
Changing on-screen displays  
Function display.  
Clock display.  
No display.  
01 BBC1  
STOP  
1:17:15  
19:35  
SP  
19:35  
22  
M O R E  
You can program your televideo so that it  
switches on and/or off (with the selected  
station) at a time you want.  
f u n c t i o n s  
Television timer  
MAIN MENU  
PICTURE  
TV TIMER  
RECORD TIMER  
PRESET  
MISCELLANEOUS  
Call up the televideo’s main “MAIN”  
SELECT  
ENTER  
EXIT  
MENU  
TV TIMER  
01:01:1997 WED  
DATE  
TIME  
02:30  
ON TIMER  
PR  
OFF TIMER  
06:00 OFF  
01  
00:00 OFF  
Choose “TV TIMER.  
SELECT  
MOVE  
CLEAR  
EXIT  
CLEAR  
MENU  
Type in:  
the switch on time  
the station number  
the switch off time  
N.B, Ensure on timer OFF is set to on and OFF timer  
OFF is set to on.  
Store leaving the menu.  
You can switch your televideo off (stand-by)  
(Do not use the main power button on the front panel  
of the set.)  
Snooze automatic  
You can set your televideo to automatically switch  
off after a period of 10 to 120 minutes.  
Press the button repeatedly.  
SLEEP 120  
In TV mode, if the broadcasing signal is not continuously present, for approx. 30minutes,  
the TV receiver will automatically power off.  
The “TV TIMER” only works if no “VIDEO TIMER” is programmed.  
Adjusting the “ON TIMER” once will cause the televideo to switch on every day at the  
same time (till you clear or change the setting.)  
You can programme “ON TIME(including “PR) and/or “OFF TIME”.  
23  
If you wish to use the VideoPlus+system for programming timer recordings, you  
must first allocate the 3-digit VideoPlus+guide numbers to each corresponding  
station number.  
M
O
R
E
These are given in those TV guides that publish the VideoPlus+numbers.  
f u n c t i o n s  
VideoPlus+ guide numbers  
MAIN MENU  
PICTURE  
TV TIMER  
RECORD TIMER  
PRESET  
MISCELLANEOUS  
Call up the televideo’s “MAIN  
MENU”.  
SELECT  
ENTER  
EXIT  
MENU  
MISCELLANEOUS  
CHILD CLOCK  
CHARACTER SET WEST  
AUTO REPEAT OFF  
VIDEOPLUS PRESET  
Choose “MISCELLANEOUS”.  
SELECT  
ENTER  
EXIT  
MENU  
VIDEOPLUS PRESET  
PR NAME VIDEOPLUS CH  
00  
01  
02  
03  
04  
05  
----  
----  
----  
----  
----  
----  
---  
---  
---  
---  
---  
---  
Choose “VIDEOPLUS PRESET.  
SELECT  
CLEAR  
EXIT  
CLEAR  
MENU  
Type in the guide number corresponding to each station (number)  
you have stored. E.g. if you have stored BBC1 on 01 then put 001  
against 01 and if you have stored BBC2 on 02 then put 002 against  
02 however. If you wish to record a satellite programme using  
videoplus+ you have to insert each code against the programme no  
E.G. If you have SKY1 under station number “TV PR” 06 then type  
in the guide number for SKY1 which is 101, against 06.  
To move to the next station  
number.  
To clear a wrong input.  
Store leaving the menu.  
24  
M O R E  
f u n c t i o n s  
Teletext  
SWITCHING TELETEXT ON/OFF  
Press the TELETEXT button ( ). the index page viewed last will appear. Press the TELETEXT button to return to the TV mode.  
COLOUR BUTTONS IN TOP/FLOF TELETEXT  
A red, green, yellow and cyan field is shown at the bottom of the screen.  
If TOP of FLOF teletex (FASTEXT) is transmitted by the station. pressing the corresponding colour button on the remote controller, you can  
select the desired page easily.  
SELECTING PAGES  
The NUMBER button 0…9 are used to enter a page number.  
The selected page number appears at the top of the screen and the page appears after a short time.  
The UP/DOWN buttons incerase or decrease the current page number by 1.  
INDES PAGE  
You can switch directly to the programme preview (with TOP text) or the overview page of the station you are currently viewing by  
pressing the INDEX ( ) button.  
PAGE HOLD  
Several sub pages can be combined under a page number and are scrolled at an interval determined by the TV station.  
The presence of sub pages is indicated by, for example, 3/6 beneath the time, which means that you are looking at the 3nd page of a total  
of 6 pages.  
If you want to look at a subpage for a longer period of time, press the HOLD ( ) button. The contents of the subpage shown are kept on  
the screen and no longer updated or switched to other subpages. Pressing the HOLD button again, the current subpage appear.  
CALLING UP SUBPAGE DIRECTLY  
Pressing the SUBPAGE ( ) button “Page no/…”  
appears at the bottom of the screen. Enter the subpage number that you want to call up with the NUMBER button 0…9, for example the  
2nd page. sequence 0002. The desired subpage is sought and displayed. To exit, press SUBPAGE ( ) button again.  
WATCHING TELEVISION DURING TELETEXT MODE  
Some pages are continually updated, for example, stock market reports, sports announcements, and the latest news. If you want to watch  
TV and stay informed at the same time, press CANCEL ( ) button.  
The reguiar programme is still visible and the the teletext symbol ( ) appears at the top of the screen. Pressing the CANCEL button  
again, the teletext page appears with the update information.  
REVEAL ANSWER  
This function can be used on certain pages to reveal the solution of riddles. Press the REVEAL button ( ) to reveal a hidden answer and  
press again to hide it.  
TV/TELETEXT  
Watch the TV programme and the Teletext pages simultaneously. The next press returns to the normal display.  
CONTRAST AND BRIGHTNESS CONTROL IN TELETEXT MODE  
Press the MENU button in teletext mode, the contrast and brightness control menu will be displayed in the bottom of the screen. You can  
adjust contrast and brightnes using the corresponding colour button on the remote controller.  
DOUBLING CHARACTER SIZE  
Repeatedly pressing the SIZE button ( ) doubles the character size in the following order:  
Upper half of the page LOWER half of the page  
Teletext character set  
MISCELLANEOUS  
Return to normal size.  
Choose “CHARACTER SET WESTpress  
/
buttons.  
CHILD LOCK  
CHARACTER SET WEST  
AUTO REPEAT OFF  
VIDEOPLUS PRESET  
EAST WEST  
TURKISH  
SELECT  
CHANGE  
EXIT  
MENU  
25  
CONNECTIONS  
a n d c o p y i n g  
Switch off all components when connecting or disconnecting cables.  
Copying  
To copy to your televideo from another  
video machine, connect the two machines  
with a cable between their AV sockets and  
select as programme “AV1” (EURO AV,  
SCART)  
Using the  
button.  
Set the other video machine to playback and  
your Daewoo machine to record.  
Picture and sound of the selected station is  
always available on the EURO AV (SCART)  
socket, e.g. to record with another VCR.  
On the other video, select its AV input and  
set the machine to record.  
Switch your televideo to play back at the  
position you want copying to start.  
Assembling  
Should you wish to assemble your own film, from camcorder  
footage for example, use the assembly technique for smooth edit  
points:  
Move the tape to the position  
at which the new scene is to be  
PLAY  
0:00:00  
added using the play functions  
(pages 12/13).  
Wind back slightly before the  
edit point and put the machine  
STILL  
0:00:00  
into pause using the PAUSE  
button (do not press STOP!).  
12AB  
REC  
0:00:12  
Now go directly into record.  
For the best results, the source cassette from which you are  
recording should already be playing back when you start recording.  
26  
CONNECTIONS  
and  
copying  
Scart socket  
This is used to connect : a VCR, a Camcoder and a video game console or satellite TV receiver.  
In most case, the set changes automatically to AV mode, when the VCR connected is in playback mode.  
If not, press the AV button on the remote controller.  
The AV will be displayed on the screen with the current programme number.  
In AV mode, you can change the TV programme number with the  
/
button or the NUMBER button 0-9.  
Note that it’s impossible to control the functions excepting the volume control and mute function in the AV  
mode. You must turn the external equipment off to return to the TV mode.  
21 PIN EURO-SCRAT  
PIN  
1
2
3
4
Signal Designation  
Audio Out (linked with 3)  
Audio In (linked with 6)  
Audio Out (linked with 1)  
Audio Earth  
Matching Values  
0.5Vrms, Imp < 1k(RF 60% MOD)  
0.5Vrms, Imp > 10kΩ  
0.5Vrms, Imp < 1k(RF 60% MOD)  
5
Blue Earth  
6
7
8
9
Audio in (linked with 2)  
Blue in  
Slow (Function) Switching  
Green Earth  
0.5Vrms, Imp > 10kΩ  
0.7Vpp 3dB, Imp 75Ω  
TV:0-2V, PERI:9.5-12V, Imp > 10kΩ  
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
NC  
Green In  
NC  
Red Earth  
NC  
Red In  
Rapid (Blanking) switching  
Video Earth  
Rapid Blanking Earth  
Video Out  
Video In  
Common Earth  
0.7Vpp 3dB, Imp 75Ω  
0.7Vpp 3dB, Imp 75Ω  
Logic 0:0-0.4V, Logic 1:1-3V, Imp 75Ω  
1Vpp 3dB, Imp 75Ω  
1Vpp 3dB, Imp 75Ω  
27  
A P P E N D I X  
Before you ask a specialist  
Mains supply  
the televideo’s power  
The mains lead is not connected to the wall  
indicator does not light your  
televideo doesn’t work  
socket.  
Condensation may have formed when moving  
the televideo from a cold to a warm room.  
Wait until the video (and cassette!) reach  
room temperature.  
Recording  
doesn’t start  
Is a cassette loaded?  
the cassette starts playback or The safety tab may be missing. Cover the hole  
is ejected  
with adhesive tape (page 21).  
Playback  
no picture  
Are the TV stations tuned in on your televideo  
(pages 7~9)?  
Is there a recording on the video tape?  
Use PR/TRK buttons to adjust tracking if  
horizontal stripes appear.  
poor picture quality  
Is the cassette of poor quality or worn out?  
Test with another cassette.  
Try a different cassette. The video head drum  
may need cleaning - ask your dealer.  
Press PAUSE several times. Adjust with the  
VOL/V.LOCK buttons until you get the best  
picture.  
poor still picture  
Remote control doesnt  
work  
Are the batteries run down?  
Is the distance between remote control and  
televideo more than 7 metres?  
– Is there an object blocking the direct line  
between remote control and televideo?  
General  
Is there a cassette already loaded?  
The cassette is already fully wound back or to  
the end.  
Is the clock set correctly (page 7)?  
If no play or record function is used for about  
five minutes when left in Stop mode, the  
televideo switches its motor off to conserve  
the mechanism.  
a cassette won’t load  
the cassette won’t rewind,  
fast forward, play or record  
timer is recording incorrectly  
a loud noise when left in Stop  
mode  
We strive to continuously improve our products – we therefore reserve the right  
to make technical changes without notice. The information contained in this  
booklet is therefore subject to change and is not legally binding.  
28  
A P P E N D I X  
Playing back  
Simple recording  
Load a cassette with its safety tab in  
place (see page 21).  
Start playback.  
Stop playback.  
Choose the station whose  
programme you want to record.  
Eject the cassette.  
If the programme you wish to record  
is very long, double the possible  
recording time with “LP” (Long Play).  
Up to eight hours with an E240  
cassette.  
Fast forward or rewind the cassette  
from stop.  
Still picture from playback.  
Each press of the button advances  
the picture one frame.  
Start your recording  
PLAY ( ) switches back to normal  
playback.  
Starting from playback you can  
control search speed in 2 steps  
If you wish to interrupt recording  
briefly - then continue.  
either forwards (  
) or backwards  
(
) . Press repeatedly.  
PLAY ( ) switches back to normal  
playback.  
Stop your recording.  
One touch recording = OTR  
Choose the station you want and  
press the button once for every 30  
minutes of programme you wish to  
record.  
Auto tracking  
If you press the A.TRK key in  
PLAYBACK mode, the TVCR will  
operate the auto traking function  
again.  
29  
A P P E N D I X  
Index  
Aerial  
Assembling recordings  
6
26  
OTR  
Overlaps  
14  
16  
Child Lock  
Cleaning  
Condensation  
Counter  
21  
Precautions  
Precautions  
20  
Picture type  
22  
Satellite  
19  
27  
SCART socket  
SP (Standard Play)  
Stand-by  
14  
Precautions  
9
Euro AV  
Fine-tuning  
LP (Long Play)  
Menu  
26  
10  
14  
7
Station  
Tracking  
29  
15  
VideoPlus+  
NTSC  
13  
Technical data  
Dimensions  
W x H x D  
14” : 445 x 425 x 426 20” : 574 x 582 x 534  
21” : 646 x 598 x 540  
5A  
Weight  
14” : 13.8Kg 20” : 23.6Kg 21” : 26.2Kg  
Power supply  
Voltage  
Power consumption  
AC 220-240V~, 50Hz  
14” : 68W 20” : 78W 21” : 85W  
System  
Video  
PAL I(U.K.), NTSC PLAYBACK  
Channel range  
Channel locations  
VHF-L:CH E2 - S7 VHF-H:CH S8-S36 UHF:CH S37-E69  
70 + AUX  
Video  
System  
Speeds  
VHS / 2 heads  
SP/LP  
General  
Temperature range  
Humidity range  
Timer  
5-35˚C  
< 80%  
6 events, 1 month  
infrared, 2x1.5V, AAA size  
Remote control  
Subject to technical alterations without notice.  
30  
A P P E N D I X  
DAEWOO ELECTRONICS SALES UK LIMITED  
Your product guarantee  
Dear Customer  
Thank you for buying this Daewoo product. In the unlikely event of a failure all repair work will be carried out by  
your retailer or Daewoo approved service centre, for a period of 12 month from date of sale.  
Daewoo Electronics Sales UK Ltd., will provide the following services in order to expedite this guarantee.  
During this period should a fault occur due to improper materials or workmanship, the retailer, authorised service  
centre, or authorised service dealer will carry out repairs at no cost to yourself. Replacement products will be  
offered at the discretion of your supplying dealer.  
This guarantee will be honoured by Daewoo service networks in other E.C. members states, in accordance with the  
terms and conditions which prevail in the member state at the time service is requested.  
Conditions  
Any claims made under the terms of the guarantee must be supported by the original invoice/bill of sale issued at  
the time of sale. Daewoo reserve the right to refuse quarantee should any of the information on the bill of sale be  
removed or changed in any way after the original purchase of the product by the consumer from the retailer.  
Modifications or adjustments made to the product which enable it to conform to local technical or safety standards  
in force in any country other than the one for which the product was originally designed and manufactured, are not  
included in this guarantee. Failures arising from such modifications, whether perfomed properly or not, will not be  
covered by this guarantee.  
This guarantee does not cover any of the following :  
1) Periodic maintenance, the repair or replacement of parts due to normal wear and lear.  
2) Home service transport cost, and other costs and risks of transport relating directly or indirectly to the  
guarantee of the product.  
3) Damage to this product resulting from : the above and misuse, including but not limited to the failure to this  
product for its normal purpose or in accordance with the instructions on the proper use and maintenance of this  
product, and the installation or the use of this product in a manner inconsistent with the technical or safety  
standards in force in the country where the product is used.  
4) Repairs carried out by non-authorised service centres.  
5) Accidents, acts of God, or any cause beyond the control of Daewoo including but not limited to lightning,  
water, fire and improper ventilation.  
6) Aerial alignement and consumer control adjustments.  
7) Batteries whether supplied by Daewoo or not which become worn or exhausted in use.  
8) Loss or damage caused to any item or article used with this product. This includes (but not limited to) discs,  
tapes, records, and films.  
This guarantee does not affects your statutory rights as a consumer, not your rights against the retailer, arising  
from their sales or purchase contract.  
In the absence of applicable legislation, this guarantee will be the consumers sole and exclusive remedy, and  
neither Daewoo nor its subsidiary, or distributor shall be liable for any incidental or consequential damages for  
brecah of any express or implied guarantee of this product.  
For further information regarding this or any other query you may have about Daewoo products or its services  
please write to :  
Daewoo Eletronice Sales UK Limited  
Daewoo Building, Wharfedale Road,  
Winnersh Triangle Wokingham,  
Berkshire, RG41 5TP. UK  
Tel : 01189 252 577  
Fax : 01189 699 000  
In all cases of difficulty - consult your Daewoo dealer from whom the product was purchased.  
31  
A P P E N D I X  
Your product guarantee  
Your televideo is not intended for industrial use. It is designed specifically for  
domestic purpose.  
32  
Dear Customer  
Thank you for buying this Daewoo  
product. In the unlikely event of a failure  
all repair work will be carried out by your  
retailer or Daewoo approved service  
centre, for a period of 12 month from  
date of sale.  
DAEWOO ELECTRONICS SALES UK LIMITED  
GUARANTEE  
Serial No.  
Daewoo Building, Wharfedale Road  
Winnersh Triangle Wokingham  
Berkshire, RG41 5TP. UK  
Tel : 01189 252 577  
Daewoo Electronics Sales UK Ltd., will  
provide the following services in order to  
expedite this guarantee.  
Fax : 01189 699 000  
During this period should a fault occur  
due to improper matenials or  
workmanship, the retailer, authorised  
service centre, or authorised service  
dealer will carry out repairs at no cost to  
yourself. Replacement products will be  
offered at the discretion of your  
supplying dealer.  
Model No.  
This guarantee will be honoured by  
Daewoo service networks in other E.C.  
members states, in accordance with the  
tems and conditions which prevail in the  
member state at the time service is  
requested.  
Conditions  
This guarantee does not cover any of the following :  
Any claims made under the terms of the quarantee must be supported  
by the original invoice/bill of sale issued at the time of sale. Daewoo  
reserve the right to refuse quarantee should any of the information on  
the bill of sale be removed or changed in any way after the original  
purchase of the product by the consumer from the retailer.  
1) Periodic maintenance, the repair or replacement of parts due to  
nomal wear and lear.  
2) Home service transport cost, and other costs and risks of transport  
relating directly or indirectly to the guarantee of the product.  
3) Damage to this product resulting from : the above and misuse,  
including but not limited to the failure to this product for its nomal  
purpose or in accordance with the instructions on the proper use and  
maintenance of this product, and the installation or the use of this  
product in a manner inconsistent with the technical or safety  
standards in force in the country where the product is used.  
4) Repair carried out by non-authorised service centres.  
5) Accidents, acts of God, or any cause beyond the control of Daewoo  
including but not limited to lightning, water, fire and improper  
ventilation.  
6) Aerial alignment and consumer control adjustments.  
7) Batteries whether supplied by Daewoo or not which become wom or  
exhausted in use.  
This guarantee does not affects your statutory rights as a consumer, not  
your rights against the retailer, arising from their sales or purchase  
contract.  
In the absence of applicable legislation, this guarantee will be the  
consumers sole and exclusive remedy, and neither Daewoo nor its  
subsidiary, or distributor shall be liable for any incidental or  
consequential damages for breach of any express or implied guarantee  
of this product.  
For further information regarding this or any other query you may have  
about Daewoo products or its services please write to :  
Daewoo Building, Wharfedale Road  
Modifications or adjustments made to the product which enable it to  
conform to local technical or safety standards in force in any country  
other than the one for which the product was originally designed and  
manufactured, are not included in this guarantee. Failures arising from  
such modifications, whether performed properly or not, will not be  
covered by this guarantee.  
Winnersh Triangle Wokingham  
Bershire, RG41 5TP. UK  
Tel : 01189 252 577  
Fax : 01189 699 000  

HP Hewlett Packard Hewlett Packard Computer Monitor 2211X User Manual
GE JB640 User Manual
GE 25846 User Manual
Electrolux Thermaline WHWURAOOOO User Manual
Dell SE178WFP User Manual
Cypress CY7C130A User Manual
Cres Cor Roast N Hold CO 151 FUA 12B User Manual
Avaya MERLIN MAGIX 4400D User Manual
Asus PB278Q User Manual
Alto Shaam Ventless Hood AR 7VH User Manual