Daewoo DTQ 2133SSN User Manual

S/M No. : TCN001GEF1  
Service Manual  
Color Television  
CN-001GF  
CHASSIS :  
Model :  
DTQ-2133SSN  
DTQ-21U4SSN  
DTQ-2133SSFN  
Caution  
: In this Manual, some parts can be changed for improving. their  
performance without notice in the parts list. So, if you need the  
latest parts information, please refer to PPL(Parts Price List)in  
Service Information Center.  
SEP. 2005  
PRODUCT SAFETY SERVICING GUIDELINES FOR AUDIO - VIDEO PRODUCTS  
CAUTION : DO NOT ATTEMPT TO MODIFY THIS PRODUCT IN ANY WAY.  
NEVER PERFORM CUSTOMIZED INSTALLATIONS WITHOUT MANUFAC-  
TURER'S APPROVAL. UNAUTHORIZED MODIFICATIONS WILL NOT ONLY VOID  
THE WARRANTY, BUT MAY LEAD TO YOUR BEING LIABLE FOR ANT RESULT-  
ING PROPERTY DAMAGE OR USER INJURY.  
SERVICE WORK SHOULD BE PERFORMED ONLY AFTER YOU ARE THOR-  
OUGHLY FAMILIAR WITH ALL OF THE FOLLOWING SAFETY CHECKS AND  
SERVICING GUIDELINES. TO DO OTHERWISE, INCREASES THE RISK OF  
POTENTIAL HAZARDS AND INJURY TO THE USER.  
SUBJECT : X-RADIATION  
1. BE SURE PROCEDURES AND INSTRUCTIONS TO ALL SERVICE PERSON-  
NEL COVER THE SUBJECT OF X-RADIATION. THE ONLY POTENTIAL  
SOURCE OF X-RAYS IN CURRENT T.V. RECEIVERS IS THE PICTURE TUBE.  
HOWEVER, THIS TUBE DOES NOT EMIT X-RAYS WHEN THE HIGH VOLT-  
AGE IS AT THE FACTORY SPECIFIED LEVEL. THE PROPER VALUE IS  
GIVEN IN THE APPLICABLE SCHEMATIC. OPERATION AT HIGHER VOLT-  
AGES MAY CAUSE A FAILURE OF THE PICTURE TUBE OR HIGH VOLTAGE  
SUPPLY AND UNDER CERTAIN CIRCUMSTANCES, AMY PRODUCE RADIA-  
TION IN EXCESS OF DESIRABLE LEVELS.  
WHILE SERVICING, USE AN ISOLATION TRANSFORMER FOR PROTECTION  
FROM A.C. LINE SHOCK.  
2. ONLY FACTORY SPECIFIED C.R.T ANODE CONNECTORS MUST BE USED.  
DEGAUSSING SHIELDS ALSO SERVE AS X-RAY SHIELD IN COLOR SETS.  
ALWAYS RE-INSTALL THEM.  
SAFETY CHECKS  
AFTER THE ORIGINAL SERVICE PROBLEM HAS BEEN CORRECTED, A CHECK  
SHOULD BE MADE OF THE FOLLOWING:  
3. IT IS ESSENTIAL THAT SERVICE PERSONNEL HAVE AVAILABLE AN ACCU-  
RATE AND RELIABLE HIGH VOLTAGE METER. THE CALIBRATION OF THE  
METER SHOULD BE CHECKED PERIODICALLY AGAINST A REFERENCE  
STANDARD. SUCH AS THE ONE AVAILABLE AT YOUR DISTRIBUTOR.  
4. WHEN THE HIGH VOLTAGE CIRCUITRY IS OPERATING PROPERLY THERE  
IS NO POSSIBILITY OF AN X-RADIATION PROBLEM. EVERY TIME A COLOR  
CHASSIS IS SERVICED, THE BRIGHTNESS SHOULD BE RUN UP AND  
DOWN WHILE MONITORING THE HIGH VOLTAGE WITH A METER TO BE  
CERTAIN THAT THE HIGH VOLTAGE DOES NOT EXCEED THE SPECIFIED  
VALUE AND THAT IT IS REGULATING CORRECTLY. WE SUGGEST THAT  
YOU AND YOUR SERVICE ORGANIZATION REVIEW TEST PROCEDURES  
SO THAT VOLTAGE REGULATION IS ALWAYS CHECKED AS A STANDARD  
SERVICING PROCEDURE, AND THAT THE HIGH VOLTAGE READING BE  
RECORDED ON EACH CUSTOMER’S INVOICE.  
5. WHEN TROUBLESHOOTING AND MAKING TEST MEASUREMENTS IN A  
PRODUCT WITH A PROBLEM OF EXCESSIVE HIGH VOLTAGE, AVOID  
BEING UNNECESSARILY CLOSE TO THE PICTURE TUBE AND THE HIGH  
VOLTAGE SUPPLY. DO NOT OPERATE THE PRODUCT LONGER THAN IS  
NECESSARY TO LOCATE THE CAUSE OF EXCESSIVE VOLTAGE.  
6. REFER TO HV, B+ AND SHUTDOWN ADJUSTMENT PROCEDURES  
DESCRIBED IN THE APPROPRIATE SCHEMATIC AND DIAGRAMS (WHERE  
USED).  
SUBJECT:FIRE & SHOCK HAZARD  
1. BE SURE THAT ALL COMPONENTS ARE POSITIONED IN SUCH A WAY AS  
TO AVOID POSSIBILITY OF ADJACENT COMPONENT SHORTS. THIS IS  
ESPECIALLY IMPORTANT ON THOSE MODULES WHICH ARE TRANS-  
PORTED TO AND FROM THE REPAIR SHOP.  
2. NEVER RELEASE A REPAIR UNLESS ALL PROTECTIVE DEVICES SUCH AS  
INSULATORS, BARRIERS, COVERS, SHIELDS, STRAIN RELIEFS, POWER  
SUPPLY CORDS, AND OTHER HARDWARE HAVE BEEN REINSTALLED PER  
ORIGINAL DESIGN. BE SURE, THAT THE SAFETY PURPOSE OF THE  
POLARIZED LINE PLUG HAS NOT BEEN DEFEATED.  
3. SOLDERING MUST BE INSPECTED TO DISCOVER POSSIBLE COLD SOL-  
DER JOINTS, SOLDER SPLASHES OF SHARP SOLDER POINTS. BE CER-  
TAIN TO REMOVE ALL LOOSE FOREIGN PARTICLES.  
4. CHECK FOR PHYSICAL EVIDENCE OF DAMAGE OR DETERIORATION TO  
PARTS AND COMPONENTS, FOR FRAYED LEADS, DAMAGED INSULATION  
(INCLUDING A.C. CORD), AND REPLACE IF NECESSARY. FOLLOW ORIGI-  
NAL LAYOUT, LEAD LENGTH AND DRESS.  
5. NO LEAD OR COMPONENT SHOULD TOUCH A RECEIVING TUBE OR A  
RESISTOR RATED AT 1 WATT OR MORE. LEAD TENSION AROUND PRO-  
TRUDING METAL SURFACES MUST BE AVOIDED.  
6. ALL CRITICAL COMPONENTS SUCH AS FUSES, FLAMEPROOF RESISTOR,  
CAPACITORS, ETC. MUST BE REPLACED WITH EXACT FACTORY TYPES.  
DO NOT USE REPLACEMENT COMPONENTS OTHER THAN THOSE SPECI-  
FIED OR MAKE UNRECOMMENDED CIRCUIT MODIFICATIONS.  
SUBJECT : IMPLOSION  
1. ALL DIRECT VIEWED PICTURE TUBES ARE EQUIPPED WITH AN INTEGRA  
IMPLOSION PROTECTION SYSTEM. BUT CARE SHOULD BE TAKEN TO  
AVOID DAMAGE DURING INSTALLATION. AVOID SCRATCHING THE  
TUBE. OF SCRATCHED REPLACE IT.  
7. AFTER RE-ASSEMBLY OF THE STE ALWAYS PERFORM AN A.C. LEAKAGE  
TEST ON ALL EXPOSED METALLIC PARTS OF THE CABINET. (THE CHAN-  
NEL SELECTOR KNOB, ANTENNA TERMINALS, HANDLE AND SCREWS) TO  
BE SURE THE SET IS SAFE TO OPERATE WITHOUT DANGER OF ELECTRI-  
CAL SHOCK. DO NOT USE A LINE ISOLATION TRANSFORMER DURING  
THIS TEST USE AN A.C. VOLTMETER, HAVING 5000 OHMS PER VOLT OR  
MORE SENSITIVITY, IN THE FOLLOWING MANNER : CONNECT A 1500 OHM  
10 WATT RESISTOR, PARALLELED BY A .15 MFD. 150V A.C. TYPE CAPACI-  
TOR BETWEEN A KNOWN GOOD EARTH GROUND (WATER POPE, CON-  
DUIT, ETC.) AND THE EXPOSED METALLIC PARTS, ONE AT A TIME.  
MEASURE THE A.C. VOLTAGE ACROSS THE COMBINATION OF 1500 OHM  
RESISTOR AND .15 MFD CAPACITOR. REVERSE THE A.C. PLUG AND  
REPEAT A.C. VOLTAGE MEASUREMENTS FOR EACH EXPOSED METALLIC  
PART. VOLTAGE MEASURED MUST NOT EXCEED .75 VOLTS R.M.S THIS  
CORRESPONDS TO 0.5 MILLIAMP A.C. NAY VALUE EXCEEDING THIS LIMIT  
CONSTITUTES A POTENTIAL SHOCK HAZARD AND MUST BE CORRECTED  
IMMEDIATELY.  
2. USE ONLY RECOMMENDED FACTORY REPLACEMENT TUBES.  
SUBJECT : TIPS ON PROPER INSTALLATION  
1. NEVER INSTALL ANY PRODUCT IN A CLOSED-IN RECESS, CUBBYHOLE OR  
CLOSELY FITTING SHELF SPACE, OVER OR CLOSE TO HEAT DUCT, OR IN  
THE PATH OF HEATED AIR FLOW.  
2. AVOID CONDITIONS OF HIGH HUMIDITY SUCH AS: OUTDOOR PATIO  
INSTALLATIONS WHERE DEW IS A FACTOR, NEAR STEAM RADIATORS  
WHERE STEAM LEAKAGE IS A FACTOR, ETC.  
3. AVOID PLACEMENT WHERE DRAPERIES MAY OBSTRUCT REAR VENTING.  
THE CUSTOMER SHOULD ALSO AVOID THE USE OF DECORATIVE  
SCARVES OR OTHER COVERINGS WHICH MIGHT OBSTRUCT VENTILA-  
TION.  
4. WALL AND SHELF MOUNTED INSTALLATIONS USING A COMMERCIAL  
MOUNTING KIT, MUST FOLLOW THE FACTORY APPROVED MOUNTING  
INSTRUCTIONS. A PRODUCT MOUNTED TO A SHELF OR PLATFORM MUST  
RETAIN ITS ORIGINAL FEET (OR THE EQUIVALENT THICKNESS IN SPAC-  
ERS)TO PROVIDE ADEQUATE AIR FLOW ACROSS THE BOTTOM, BOLTS  
OR SCREWS USED FOR FASTENERS MUST NOT TOUCH ANY PARTS OR  
WIRING. PERFORM LEAKAGE TEST ON CUSTOMIZED INSTALLATIONS.  
5. CAUTION CUSTOMERS AGAINST THE MOUNTING OF A PRODUCT ON  
SLOPING SHELF OR A TILTED POSITION, UNLESS THE PRODUCT IS  
PROPERLY SECURED.  
A.C. VOLTMETER  
0.15 uF  
GOOD EARTH GROUND  
SUCH AS THE WATER  
PIPE, CONDUIT, ETC.  
PLACE THIS PROBE  
ON EACH EXPOSED  
METAL PART  
1500  
OHM  
10WATT  
6. A PRODUCT ON A ROLL-ABOUT CART SHOULD BE STABLE ON ITS MOUNT-  
ING TO THE CART. CAUTION THE CUSTOMER ON THE HAZARDS OF TRY-  
ING TO ROLL A CART WITH SMALL CASTERS ACROSS THRESHOLDS OR  
DEEP PILE CARPETS.  
7. CAUTION CUSTOMERS AGAINST THE USE OF A CART OR STAND WHICH  
HAS NOT BEEN LISTED BY UNDERWRITERS LABORATORIES. INC. FOR  
USE WITH THEIR SPECIFIC MODEL OF TELEVISION RECEIVER OR  
GENERICALLY APPROVED FOR USE WITH T.V.S OF THE SAME OR  
LARGER SCREEN SIZE.  
SUBJECT : GRAPHIC SYMBOLS  
THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL,  
WITHIN AN EQUILATERAL TRIANGLE, IS INTENDED  
TO ALERT THE SERVICE PERSONNEL TO THE PRES-  
ENCE OF UNINSULATED “DANGEROUS VOLTAGE”  
THAT MAY BE OF SUFFICIENT MAGNITUDE TO CON-  
STITUTE A RISK OF ELECTRIC SHOCK.  
8. CAUTION CUSTOMERS AGAINST THE USE OF EXTENSION CORDS,  
EXPLAIN THAT A FOREST OF EXTENSIONS SPROUTING FROM A SINGLE  
OUTLET CAN LEAD TO DISASTROUS CONSEQUENCES TO HOME AND  
FAMILY.  
THE EXCLAMATION POINT WITHIN AN EQUILATERAL  
TRIANGLE IS INTENDED TO ALERT THE SERVICE  
PERSONNEL TO THE PRESENCE OF IMPORTANT  
SAFETY INFORMATION ON SERVICE LITERATURE.  
2
PRODUCT SAFETY SERVICING GUIDELINES FOR COLOR TELEVISION RECEIVERS  
CAUTION : Do not attempt to modify this product in any way. Unau-  
thorized modifications will not only void the warranty, but may lead to  
your being liable for any resulting property damage or user injury.  
Service work should be performed only after you are thoroughly  
familiar with all of the following safety checks and servicing guide-  
lines. To do otherwise, increases the risk of potential hazards and  
injury to the user.  
GRAPHIC SYMBOLS :  
The lightning flash with arrowhead symbol,  
within an equilateral triangle, is intended to alert  
the service personnel to the presence of uninsu-  
lated “dangerous voltage” that may be of suffi-  
cienty magnitude to constitute a risk of electric  
shock.  
SAFETY CHECKS  
The exclamation point within an equilateral tri-  
angle is intended to alert the service personnel  
to the presence of important safety information  
in service literature.  
After the original service problem has been corrected, a check should  
be made of the following:  
SUBJECT : FIRE & SHOCK HAZARD  
Fuse symbol is printed on pcb adjacent to the  
fuse, with “RISK OF FIRE REPLACE FUSE AS  
MARKED”. The symbol is explained in the ser-  
vice manual with the following wording or equiv-  
alent.  
1. Be sure that all components are positioned in such a way as to  
avoid possibility of adjacent component shorts. This is especially  
important on those chassis which are transported to and from the  
repair shop.  
2. Never release a repair unless all protective devices such as insula-  
tors, barriers, covers, shields, strain reliefs, and other hardware  
have been reinstalled per original design.  
“CAUTION : FOR CONTINUED PROTECTION AGAINST FIRE  
HAZARD, REPLACE ONLY WITH SAME TYPE (4A, 125V)” and  
ATTENTION: AFIN D’ASSU UNE PROTECTION PERMANENTE  
3. Soldering must be inspected to discover possible cold solder joints,  
frayed leads, damaged insulation (including A.C. cord), solder  
splashes or sharp solder points. Be certain to remove all loose for-  
eign particals.  
CONTRE LES RISQUES D’INCENDIE, REMPLACER UNIQUE-  
MENT PAR UN FUSIBLE DE MEME TYPE ET DE ”4A, 125V”.  
SUBJECT : X-RADIATION  
4. Check for physical evidence of damage or deterioration to parts  
and components, and replace if necessary follow original layout,  
lead length and dress.  
1. Be sure procedures and instructions to all service personnel cover  
the subject of X-rays in current T.V. receivers is the picture tube.  
However, this tube does not emit X-rays when the high voltage is  
at the factory specified level. The proper value is given in the appli-  
cable schematic. Operation at higher voltages may cause a failure  
of the picture tube or high voltage supply and, under certain cir-  
cumstances, may produce radiation in excess of desirable levels.  
2. Only factory specified C.R.T. anode connectors must be used.  
Degaussing shields also serve as X-ray shield in color sets.  
Always re-install them.  
5. No leads or components should touch a receiving tube or a resistor  
rated at 1 watt or more. Lead tension around protruding metal sur-  
faces must be avoided.  
6. All critical components such as fuses, flameproof resistors, capaci-  
tors, etc. must be replaced with exact factory types. Do not use  
replacement components other than those specified or make  
unrecommended circuit modifications.  
7. After re-assembly of the set always perform an A.C. leakage test  
on all exposed metallic parts of the cabinet, (the channel selector  
knob, antenna terminals, handle and screws) to be sure the set is 3. It is essential that the serviceman has available an accurate and  
safe to operate without danger of electrical shock. Do not use a  
line isolation transformer during this test. Use an A.C. voltmeter,  
having 5000 ohms per volt or more sensitivity, in the following  
reliable high voltage meter. The calibration of the meter should be  
checked perio - dically against a reference standard. Such as the  
one available at your distributor.  
manner : connect a 1500 ohm 10 watt resistor, paralleled by a 15 4. When the high voltage circuitry is operating properly there is no  
mfd. 150V A.C. type capacitor between a known good earth  
ground (9water pipe, conduit, etc.) and the exposed metallic parts,  
one at a time. Measure the A.C. voltage across the combination of  
1500 ohm resistor and 0.15 MFD capacitor. Reverse the A.C. plug  
and repeat A.C. voltage measurements for each exposed metallic  
part. Voltage measured must not exceed 0.75 volts R.M.S. This  
corresponds to 0.5 milliamp A.C. Any value exceeding this limit  
constitutes a potential shock hazard and must be corrected imme-  
diately.  
possibility of an X-radiation problem. Every time a color chassis is  
serviced, the brightness should be run up and down while monitor-  
ing the high voltage with a meter to be certain that the high voltage  
does not exceed the specified value and that it is regulating cor-  
rectly. We suggest that you and your service organization review  
test procedures so that voltage regulation is always checked as a  
standard servicing procedure. And that the high voltage reading be  
recorded on each customer’s invoice.  
5. When troubleshooting and making test measurements in a receiver  
with a problem of excessive high voltage, avoid being unnecessarily  
close to the picture tub eand the high voltage compartment.  
Do not operate the chassis longer than is necessary to locate the  
cause of excessive voltage.  
A.C. VOLTMETER  
6. Refer to HV, B+and Shutdown adjustment procedures described in  
the appropriate schematic and diagrams(where used).  
0.15 uF  
Good earth ground,  
such as the water  
pipe, conduit, etc.  
Place this probe  
on each exposed  
metal part.  
1500 OHM  
10WATT  
3
4. Wall and shelf mounted installations using a commercial mounting  
kit, must follow the factory approved mounting instructions. A  
receiver mounted to a shelf or platform must retain its original  
feet(or the equivalent thickness in spacers) to provide adequate  
are flow across the bottom, bolts or screws used for fasteners  
must not touch and parts or wiring. Perform leakage test on cus-  
tomized installations.  
SUBJECT : IMPLOSION  
1. All direct viewed picture tubes are equipped with an integral implo-  
sion protection system, but care should be taken to avoid damage  
during installation. Avoid scratching the tube. If scratched, replace  
it.  
2. Use only recommended factory replacement tubes.  
5. Caution customers against the mounting of a receiver on sloping  
shelf or a tilted position, unless the receiver is properly secured.  
6. A receiver on a roll-about cart should be stable on its mounting to  
the cart. Caution the customer on the hazards of trying to roll a cart  
with small casters across thresholds or deep pile carpets.  
7. Caution customers against the use of a cart or stand which has not  
been listed by underwriters laboratories, inc. For use with their  
specific model of television receiver or generically approved for  
use with T.V.’s of the same or larger screen size.  
SUBJECT : TIPS ON PROPER INSTALLATION  
1. Never install any receiver in closed-in recess, cubbyhole or closely  
fitting shelf space over, or close to heat duct, or in the path of  
heated air flow.  
2. Avoid conditions of high humidity such as : Outdoor patio installa-  
tions where dew is a factor. Near steam radiators where steam  
leakage is a factor, etc.  
3. Avoid placement where draperies may obstruct rear venting. The  
customer should also avoid the use of decorative scarves or other  
coverings which might obstruct ventilation.  
4
SPECIFICATIO N S  
MODEL  
DTQ-2133SSN  
DTQ-21U4SSN  
DTQ-2133SSFN  
FREE  
REMARK  
ITEM  
TV STANDARD  
NTSC - M  
POWER INPUT  
110V  
POWER CONSUMTION  
TUNING SYSTEM  
TUNING RANGES  
65 WATTS  
FREQUENCY SYNTHESIZER  
VHF : 2 ~ 13 (12)  
UHF : 14 ~ 69 (56)  
CATV : 1 ~ 125 (125)  
1.3W+1.3W  
SOUND OUTPUT  
SPEAKER  
8ohm 3W  
ANTENA INPUT  
IMPEDANCE  
75ohm Unbalanced  
AUXILIARY INPUT  
TERMINAL  
Front : Video, Audio  
Rear : Video, Audio  
INTERMEDIATE  
FREQUENCIES  
Picture IF Carrier Frequency : 45.75MHz  
Sound IF Carrier Frequency : 41.25MHz  
Color Sub- Carrier Frequency : 3.579545MHz  
R-48C04  
REMOTE CONTROL  
SPECIAL FUNCTIONS  
3-Language OSD  
With CAPTION  
Wake-up On/Off Time  
Sleep Timer  
Power Restore  
5
BLOCK DIAGRAM  
6
ALIGNMENT INSTRUCTIONS  
1. SERVICE MODE ADJUSTMENTS  
Follow the steps below whenever service adjustment is required. See Table- A and Table- B to determine if  
service adjustments are required.  
1) How to enter the service mode using the user remote control.  
·
·
·
Turn the set on.  
Direct the remote control to the reception window of TV.  
Push buttons of remote control in sequence as follows.  
1
®
MUTE  
®
DISPLAY  
®
MUTE  
·
Then, the screen will appear as follows.  
S2  
S5  
S6  
S8  
S9  
SCRN  
IFC  
GEO  
W/B  
DP  
S12 FACT  
·
Using the channel up or channel down button, select the item you wish to adjust.  
(The color of selected item turns into the red.)  
·
Press the volume up or down button to enter in the service mode you wish to adjust.  
2) How to memorize the adjusted values in the service mode.  
·
Must press DISPLAY button the state which the screen is displaying each of service menus  
after all adjustments are completed each of all service menu.  
Table-A : Adjust the values of service mode when a part is replaced.  
ADJUSTMENT  
PART  
NOTES  
REPLACED  
NECESSARY UNNECESSARY  
I701  
(U-COM)  
Data is stored in I703.  
O
O
I101  
(MAIN)  
Initial setting values are written from I701.  
Adjusting Items  
S5  
S6  
S8  
S9  
RFAGCD  
I703  
(EEPROM)  
O
O
H.SHIFT/V.SHIFT/V.SIZE  
RD/BD/RB/GB/BB  
Brightness  
CRT  
Adjust items related to picture tube only.(White Balance adjustment)  
7
ALIGNMENT INSTRUCTIONS  
Table-B  
DATA  
MODE  
S2  
ADJUSTMENT ITEMS  
REMARKS  
INITIAL  
-
OK  
36  
RANGE  
-
OK, NG  
0~63  
Screen Adjustment  
Auto Vco  
VIF VCO Adj  
Auto Hvco  
H Vco adj  
OK  
04  
OK, NG  
0~7  
S5  
S6  
Auto RFAGC  
RF-DELAY  
AGC Point  
OK  
90  
3.75  
OK, NG  
0~125  
3.25/3.5/3.75/4.0  
Align RF AGC threshold  
Select AGC reference voltage  
VCO CH NO  
AGC CH NO  
22  
10  
-
H.Shift(Horizental Shift)  
V.Shift(Vertical Shift)  
V.Size(Vertical Size)  
VBLK Shift  
09  
02  
32  
03  
NO  
0~15  
0~7  
0~63  
0~7  
VBLK Shift On  
NO,YES  
Automatically turn off in  
15min for no received signal  
NO SD POWER OFF  
NO  
NO,YES  
Vif F  
HTONE SW  
White Back  
V Free  
Gamma Control  
Trap Fine ad  
H Free  
WINDOW  
Y SW LPF  
FM Level  
0
1
0
0
1
3
0
0
ON  
0
0
0
0
0
0
0
1
15  
0,1  
0,1  
0,1  
0,1  
0~3  
0~3  
0,1  
0,1  
0,1  
0,1  
0,1  
0~3  
0~3  
0,1  
0,1  
0,1  
C Clip Level  
TRAP Off  
EXT  
S7(1) Y DL Fine  
Y DL Time  
VOUT STOP  
Fsc Free  
V Mute  
ON,OFF 0~30  
0,1  
Service SW  
AFC1 Gain  
AFC2 Gain  
Analog OSD  
0
1
0
0,1  
0,1  
0,1  
0
US/JA SW  
SYNC DET  
4
0
0~7  
0,1  
S7(2)  
Auto Slice Down  
FBL Vth L  
0
1
0,1  
0,1  
BGpFbp OFF  
0
0,1  
VIF VIDEO OUT GAIN  
4
0~7  
RD(Red Drive)  
BD(Blue Drive)  
S8(1) RB(Red Bias)  
GB(Green Bias)  
BB(Blue Bias)  
64  
64  
128  
128  
128  
00  
127  
00  
63  
63  
140  
75  
10  
36  
15  
38  
0~127  
0~127  
0~255  
0~255  
0~255  
0~255  
0~255  
0~255  
0~127  
0~127  
0~255  
0~155  
0~27  
0~77  
0~27  
0~43  
Align RED OUT AC level  
Align BLUE OUT AC level  
Align RED OUT DC level  
Align Green OUT DC level  
Align BLUE OUT DC level  
SCR R-BIAS  
SCR G-BIAS  
SCR B-BIAS  
SCR R-DRIVE  
SCR B-DRIVE  
SCR BRIGHT  
Brightness  
Contrast  
Tint  
S8(2)  
Align common RGB DC level  
S9  
Color  
Sharpness  
Video Tsharp  
ABCL  
Blackstre.off  
Take off  
ABCL Gain  
AFT defeat  
HVBLK off  
Black stretch discharge  
Black stretch charge  
Forwarding Mode  
SsliceDown2  
SsliceDown1  
OSD level  
1
0
0
0
0
0
0
0
1
1
1
0,1  
0,1  
0,1  
0,1  
0,1  
0,1  
0,1  
0,1  
0,1  
0,1  
0,1  
Killer level  
S11  
S12  
2
0
0~3  
0~3  
Factory Initialization  
8
ALIGNMENT INSTRUCTIONS  
2. ASSEMBLY ADJUSTMENTS  
1) SCREEN ADJUSTMENT (S2)  
Enter the service mode and select service adjustment S2.  
You cna see the one horizontal line on the screen.  
Adjust the Screen Control Volume (located on FBT) so that the horizontal line onscreen may be  
disappeared.  
Press the volume up or down button to exit in the screen adjustment mode.  
NOTE  
IN THE SCREEN ADJUSTMENT MODE, DONT PRESS OTHER BUTTONS EXCEPT VOLUME UP OR DOWN BUTTON.  
2) FOCUS ADJUSTMENT  
Turn in a local station and adjust the Focus Control knob (located on FBT) for best picture  
details at high light condition.  
3) RF AGC DELAY ADJUSTMENT (S5)  
Receive a good local channel.  
Enter the service mode and select service adjustment S5.  
You can see the OSD as shown in below.  
IF CONTROL  
AUTO VCO  
VIF VCO ADJ  
AUTO HVCO  
HVCO ADJ  
OK  
36  
OK  
04  
AUTO RFAGC  
RF-DELAY  
START  
90  
AGC POINT  
3.75  
VCO CH NO 22  
AGC CH NO 10  
Select RFAGCD item, press the volume up or down button until noise or beat in picture disappears.  
Press the DISPLAY button to memorize the data.  
9
ALIGNMENT INSTRUCTIONS  
4) GEOMETRIC ADJUSTMENTS (S6)  
Enter the service mode and select service adjustment S6.  
You can see the OSD as shown in below.  
GEOMETRY  
H. SHIFT  
09  
02  
V. SHIFT  
V. SIZE  
32  
VBLK SHIFT  
VBLK SHIFT ON  
NO SD POWER OFF  
03  
NO  
NO  
MOVE  
ADJUST RECALL:SET  
4-1. Horizontal SHIFT Adjustment  
Select H.SHIFT item, adjust H.SHIFT data value to obtain proper horizontal centering of the  
internal cross pattern at the left and right of the screen.  
4-2. Vertical SHIFT Adjustment  
Select V.SHIFT item, adjust V.SHIFT data value to center the raster properly on thescreen.  
4-3. Vertical Size Adjustment  
Select “V.SIZE” item, adjust “V.SIZE” data value to proper vertical size as follows.  
10  
ALIGNMENT INSTRUCTIONS  
5) WHITE BALANCE ADJUSTMENT(S8)  
Receive a good local channel.  
Enter the service mode and select service adjustment S8.  
You can see the OSD as shown in below.  
RD  
BD  
64  
64  
RB  
GB  
BB  
128  
128  
128  
MOVE  
ADJUST RECALL : SET  
Using volume up or volume down, adjust service adjustment data of RD/GD/BD and RB/GB/BB until a good gray  
scale with normal whites is obtained.ALIGNMENT INSTRUCTIONS  
Press the DISPLAY button to memorize the data.  
6) DIGITAL PRESET(D.P) ADJUSTMENTS(S9)  
SUBBRIGHTNESS ADJUSTMENT  
Receive a good local channel.  
Enter the service mode and select service adjustment S9.  
You can see the OSD as shoown in below.  
D.P.  
BRIGHTNESS  
CONTRAST  
TINT  
75  
10  
36  
15  
38  
COLOR  
SHARPNESS  
MOVE  
ADJUST RECALL : SET  
Select Subbrightness item, adjust Subbrightness data value to obtain normal brightness level.  
Press the DISPLAY button to memorize the data.  
CONTRAST  
Fixed value = 10  
TINT  
Fixed value = 36  
COLOR  
Fixed value = 15  
SHARPNESS  
Fixed value = 38  
7) FACTORY OUTGOING MODE (S12 : FACT)  
If you select the S12, then the set becomes factory outgoing status.  
You can see the OSD “ outgoing OK”  
11  
ALIGNMENT INSTRUCTIONS  
3. PARENTAL CONTROL PASSWORD SETTINGS  
If user forget Parental Control Password as follows.  
1) CHANGE THE PASSWORD.  
• Turn the set on.  
• Direct the remote control to the reception window of your TV/VCR  
• Using the MENU buttons, select the Special menu.  
• Using the the channel up ( ) or down ( ) duttons, select prental control.  
• Using the volume up ( ), set the password Menu.  
• Push buttons of remote control in sequence as follows.  
2
2
1
1
• Parental control password is reset.  
• Using the 0~9 buttons, enter the password.  
• Using the 0~9 buttons, repeat the password.  
Special  
Parental control  
Closed Caption : OFF  
Enter the Password  
# # # #  
CC on Mute : OFF  
Power Restore : OFF  
Parental Control  
[0 - 9] : Adjust  
n
Prev.  
Select  
Adjust  
n
Exit  
Parental control  
Parental control  
Enter a New Password  
Repeat the Password  
# # # #  
n
n
[0 - 9] : Adjust  
Prev.  
[0 - 9] : Adjust  
Exit  
2) RESET THE PASSWORD  
• Turn the set on.  
• Direct the remote control to the reception window of your TV/VCR.  
• Push buttons of remote control in sequence as follows.  
1
MUTE  
DISPLAY MUTE  
• Then, the screen will appear as follows.  
S2  
S5  
S6  
S8  
S9  
S12  
SCRN  
IFC  
GEO  
W/B  
DP  
FACT  
• Using the channel up ( ) or down ( ) buttons, select S12 FACT.  
Press the volume up ( ) button, the set becomes factory outgoing status.  
• Parental control password is reset.  
• Using the MENU buttons, select the parental control menu, set the new password.  
12  
13  
EXPLODED VIEW  
15  
16  
12  
13  
11  
1
17  
18  
19  
19  
18  
17  
16  
15  
14  
13  
12  
11  
10  
9
4855415800  
7121301212  
4852161700  
7122401412  
4852161700  
SPEC PLATE  
SCREW TAPPING  
CLOTH BLACK  
SCREW TAPPTITE  
COVER BACK  
MAIN PCB  
1
15ART P/E FILM (C/TV)  
3
2
5
1
1
1
2
4
2
2
1
1
8
2
1
1
1
1
TT2 TRS 3X12 MFZN BK  
FELT 400X20X0.7  
TT2 TRS 4X14 MFZN BK  
FR HIPS GY  
CN-230F  
CRT AS  
4856013300  
4856219502  
4856013302  
7178301011  
4854952500  
4855546800  
7178301011  
4858314010  
4855617400  
4856716000  
4854862100  
4852081000  
SCREW CRT FIXING  
WASHER RUBBER  
SCREW CRT FIXING  
SCREW TAPPTITE  
BUTTON CH  
30X80 BK  
CR T2.0 BLACK  
30X190 BK  
TT2 WAS 3X10 MFZN  
FR ABS GY  
8
7
DECO SENSOR  
SCREW TAPPTITE  
SPEAKER  
GPPS  
6
TT2 WAS 3X10 MFZN  
SP-5070F01 3W 8OHM  
CU AU+ABS BK  
SWPA PIE0.5  
FR ABS GY  
5
4
MARK BRAND  
SPRING  
3
2
BUTTON POWER  
FRONT MASK  
1
FR HIPS GY  
NO  
PART CODE  
PART NAME  
QTY  
MATERIAL  
REMARKS  
Designed by Checked by Inspected by Approved by  
mm  
UNITS  
SCALE  
ASSY NAME  
2
3
4
5
6
7
8
9
10  
14  
BAE.J.H  
( 1 / 1 )  
0.250  
DEVELOPMENT DWG  
MODEL  
DTQ-21U4SSN  
D
Daewoo Electronics Corp.  
485009M6  
N
CN-001GF  
Mechanical Design Team, TV Research  
Center  
REFERENCE  
14  
EXPLODED VIEW  
15  
ELECTRICAL PARTS LIST  
CAUTION  
“ ” is a safety patt, so it must be used the same part.  
“ ” is a recommendable part for essential stock.  
LOC  
ZZ100  
ZZ110  
00010  
00030  
00040  
10000  
M821  
ZZ120  
M211  
M781  
ZZ130  
10  
M801  
M811  
M821  
ZZ131  
ZZ132  
ZZ140  
40  
M201A  
M201B  
M201C  
M211A  
M541  
M591  
M681  
SP01A  
SP01B  
PART CODE  
48B5748C04  
PTACPWK123  
4850A02510  
4850Q00910  
4850A00650  
48586001E2  
4858213803  
PTBCSHK123  
4852161701  
4857817630  
PTPKCPK116  
6520010100  
4858061500  
4858100B00  
4858219101  
48519A7610  
58G0000178  
PTCACAK128  
2TF01612CL  
4856017303  
4856017310  
4856219502  
7172401412  
4855415800  
4855930900  
4856812001  
7178301011  
7178301011  
PART NAME  
TRANSMITTER REMOCON  
ACCESSORY AS  
ANT ROD  
DESCRIPTION  
REMARK  
LOC  
PART CODE  
PART NAME  
DESCRIPTION  
REMARK  
R-48C04 (AAA)  
L401  
58H0000055  
COIL H-LINEARITY  
TRL-361A  
DTQ-21U4SSN  
S3BW216B (L=600 MM)  
R03/NN  
YSC-T-07 BR  
DTQ-20V1FS  
L.D.P.E TO.05X250X400(+20)  
DTQ-21U4SSN  
HIPS GY 21U4  
FELT 400X20X0.7  
DTQ-21U4M  
AUTO W65  
DW-3 21U4  
EPS 21U4  
P.E FOAM T0.5X1300X1150  
2103S-1015-1P  
DC-21F1 AL  
DTQ-2133SSN  
0.15X12mmX55mm  
5X30 L80 BK  
L801  
M681  
5PLF30A1—  
4856812001  
FILTER LINE  
TIE CABLE  
LF-30A1  
NYLON66 DA100  
BATTERY  
PWC1  
4859902710  
CORD POWER AS  
KJ-10+SPT-2+YPT018=2100  
,
TRANS ANT MATCHING  
MANUAL INSTRUCTION  
BAG INSTRUCTION  
COVER BACK AS  
COVER BACK  
CLOTH BLACK  
PACKING AS  
STAPLE PIN  
Q402  
00001  
0000A  
0000B  
R801  
PTL2SW7609  
TKTD2499—  
4857027609  
7174301011  
RX10B109JQ  
DDB3R0M140  
HEAT SINK ASS`Y  
TR HORI  
HEAT SINK  
SCREW TAPPTITE  
R CEMENT  
POSISTOR  
TKTD2499— + 7174301011  
KTD2499  
AL EX  
TT2 RND 3X10 MFZN  
10W 1 OHM J BEN 25MM 4P  
ECPBD3R0M140  
R882  
RLY1  
5SC0101335  
5PTSF5241P  
5S40101146  
50D10A3—-  
SW RELAY  
FILTER SAW  
SW POWER PUSH  
TRANS DRIVE  
DY2-5  
SF101  
SW801  
T401  
TSF5241P  
SS-160-7-B  
TD-10A3  
BOX CARTON  
PAD  
BAG P.E  
T402  
T801  
U102  
50H0000261  
50M3541B8-  
4859726730  
FBT  
BSC29-0141D  
TSM-3541B8  
,
,
CRT GROUND NET  
COIL DEGAUSSING  
CABINET AS  
TAPE FILAMENT  
SCREW CRT FIX  
SCREW CRT FIX  
WASHER RUBBER  
SCREW TAPPTITE  
SPEC PLATE  
DECO TERM  
TIE CABLE  
SCREW TAPPTITE  
SCREW TAPPTITE  
TRANS SMPS  
TUNER VARACTOR  
TAEC-H012F(A)  
Z802  
ZZ200  
I101  
DSVC471D14  
PTMPJ2K123  
1M61250FP-  
1DW150MAA2  
VARISTOR  
SVC471D14A (BULK)  
DTQ-21U4SSN  
M61250BFP  
PCB MAIN CHIP MOUNT B AS  
IC CHIP CHROMA  
IC CHIP MICOM  
5X30 L190 BK  
CR T2.0 BLACK  
TT2 TRS 4X14 MFZN BK  
150ART P/E FILM (C/TV)  
PVC CL T0.2  
NYLON66 DA100  
TT2 WAS 3X10 MFZN  
TT2 WAS 3X10 MFZN  
I701  
DW37150M8-AA2(088FP)  
I805  
1LTV817C-Q  
PTMPJ0K123  
CEXF1E222V  
CEXA2D229E  
CEXF2E220V  
CEXF1V471V  
CEXF1C102V  
CEXF1C471V  
CEXF1C471V  
CEXF1C471V  
CEXF1C102V  
CEXF1C102V  
CEXF1C471V  
CEXF1C471V  
CEXF1C471V  
CBXB3D102K  
CCXB2H222K  
CCXB2H222K  
CEXF1E471V  
CBXB3D471K  
CEXF2C101V  
CEXF2A470V  
CEXF1C102V  
CEXF2C101V  
CEXF1E102V  
CBXB3D471K  
PTMPJBK123  
2TM18006BE  
4856310300  
4856310300  
4856310300  
4856310300  
4856310600  
4856310600  
4856310300  
4856310300  
4856310300  
4856310600  
4856310300  
4856310300  
4856310300  
4856310600  
4856310300  
4856310600  
4856310300  
IC CHIP PHOTO COUPLER  
PCB MAIN (RHU) AS  
C ELECTRO  
C ELECTRO  
C ELECTRO  
C ELECTRO  
C ELECTRO  
C ELECTRO  
C ELECTRO  
C ELECTRO  
C ELECTRO  
C ELECTRO  
C ELECTRO  
C ELECTRO  
C ELECTRO  
C CERA SEMI  
C CERA  
LTV-817C TRAY  
DTQ-21U4SSN  
ZZ200  
C310  
C405  
C410  
C414  
C415  
C504  
C518  
C521  
C578  
C602  
C615  
C646  
C805  
C809  
C810  
C811  
C812  
C813  
C814  
C815  
C817  
C820  
C829  
C832  
ZZ200  
10  
E001  
E002  
E003  
E006  
E009  
E010  
E011  
E012  
E013  
E014  
E015  
E018  
E019  
E021  
E022  
E023  
E024  
25V RSS 2200MF (16X25) TP  
200V RUL 2.2MF (10X16) TP  
250V RSS 22MF (13X20) TP  
35V RSS 470MF (10X20) TP  
16V RSS 1000MF (10X20) TP  
16V RSS 470MF (8X12)TP  
16V RSS 470MF (8X12)TP  
16V RSS 470MF (8X12)TP  
16V RSS 1000MF (10X20) TP  
16V RSS 1000MF (10X20) TP  
16V RSS 470MF (8X12)TP  
16V RSS 470MF (8X12)TP  
16V RSS 470MF (8X12)TP  
2KV BL(N) 1000PF K (T)  
500V B 2200PF K (TAPPING)  
500V B 2200PF K (TAPPING)  
25V 470MF 10X12.5  
2KV BL(N) 470PF K (T)  
160V RSS 100MF (16X25) TP  
100V RSS 47MF (10X16) TP  
16V RSS 1000MF (10X20) TP  
160V RSS 100MF (16X25) TP  
25V RSS 1000MF (13X20) TP  
2KV BL(N) 470PF K (T)  
DTQ-21U4SSN  
6.2X500  
BSR T0.2 (R1.6)  
BSR T0.2 (R1.6)  
BSR T0.2 (R1.6)  
BSR T0.2 (R1.6)  
BSR T0.2 (R2.3)  
BSR T0.2 (R2.3)  
BSR T0.2 (R1.6)  
BSR T0.2 (R1.6)  
BSR T0.2 (R1.6)  
BSR T0.2 (R2.3)  
BSR T0.2 (R1.6)  
BSR T0.2 (R1.6)  
BSR T0.2 (R1.6)  
BSR T0.2 (R2.3)  
BSR T0.2 (R1.6)  
V901  
4859641460  
CRT  
A51QDJ470X03 P38  
,
ZZ200  
M191  
M191A  
M201  
M481  
M481A  
M561  
ZZ210  
PA601  
PA602  
PTFMSJK128  
4851948101  
7178301011  
4852081901  
4854862101  
4856716000  
4855617500  
PTSPPWK103  
4850703S51  
4850703S55  
MASK FRONT AS  
BUTTON CTRL  
SCREW TAPPTITE  
MASK FRONT  
BUTTON POWER  
SPRING  
MARK BRAND  
SPEAKER AS  
CONNECTOR  
CONNECTOR  
DTQ-2133SSN  
4952501+5546801  
TT2 WAS 3X10 MFZN  
HIPS GY  
ABS GY 21U4  
SWPA PIE0.5  
CU AU+ABS BK  
DTN-21U4FJN  
YH025-03+35098+ULW=300  
YH025-03+35098+ULW=700  
C CERA  
SP01  
4858314010  
SPEAKER  
SP-5070F01 3W 8 OHM  
C ELECTRO  
C CERA SEMI  
C ELECTRO  
C ELECTRO  
C ELECTRO  
C ELECTRO  
C ELECTRO  
C CERA SEMI  
PCB MAIN M-10 AS  
TAPE MASKING  
EYE LET  
EYE LET  
EYE LET  
EYE LET  
EYE LET  
EYE LET  
EYE LET  
EYE LET  
EYE LET  
EYE LET  
EYE LET  
EYE LET  
EYE LET  
EYE LET  
EYE LET  
EYE LET  
EYE LET  
SP02  
ZZ290  
10  
30  
40  
4858314010  
PTMPMSK123  
2193102005  
2291050616  
2291050301  
SPEAKER  
PCB MAIN MANUAL AS  
SOLDER BAR  
FLUX SOLDER  
FLUX SOLVENT  
SP-5070F01 3W 8 OHM  
DTQ-21U4SSN  
SN:PB=63:37 S63S-1320  
JS-64T3  
IM-1000  
C404  
CMYH3C822J  
C MYLAR  
1.6KV BUP 8200PF J  
C406  
C801  
C804  
C881  
D704  
D807  
CMYF2G304J  
CL1UC3474M  
CEYD2D331D  
CH1BFE222M  
DLH2PR——  
DRGP30J—-  
C MYLAR  
400V MPP 0.30MF J  
C LINE ACROSS  
C ELECTRO  
C CERA AC  
LED BLOCK  
DIODE  
0.47MF 1J(UCVSNDF/SV)+Q/O  
200V FHS 330MF (22X30)  
U/C/V AC400V 2200PF  
LH-2P-R  
RGP30J DO-201AD 600V 3A  
I301  
PTA2SW7912  
1LA78041—  
4857027912  
7174300811  
HEAT SINK ASS`Y  
IC VERTICAL  
HEAT SINK  
1LA78041— + 7174300811  
LA78041  
AL EX  
00001  
0000A  
0000B  
SCREW TAPPTITE  
TT2 RND 3X8 MFZN  
I601  
1TDA7267—  
IC AUDIO AMP  
TDA7267  
I602  
I703  
I801  
1TDA7267—  
124LC04B—  
PTE2SW7912  
IC AUDIO AMP  
IC MEMORY  
HEAT SINK ASS`Y  
TDA7267  
24LC04B  
1STRW6735- + 7174300811  
00001  
0000A  
0000B  
IL701  
JP01  
1STRW6735-  
4857027912  
7174300811  
1KRT30——  
4859109950  
4859110150  
IC POWER  
HEAT SINK  
SCREW TAPPTITE  
IC PREAMP  
JACK PIN BOARD  
JACK PIN BOARD  
STR-W6735  
AL EX  
TT2 RND 3X8 MFZN  
KRT30  
PH-JB-9710A  
YS01-9615D  
,
BSR T0.2 (R2.3)  
BSR T0.2 (R1.6)  
JP02  
16  
ELECTRICAL PARTS LIST  
LOC  
E025  
E026  
E027  
E028  
E029  
E030  
E032  
E033  
E034  
E035  
E036  
E037  
E038  
E039  
E042  
E043  
E044  
E045  
E046  
E047  
E048  
E049  
E050  
E051  
E052  
E057  
E058  
N401  
N402  
N403  
N404  
P102  
P401  
P601  
P602  
P801A  
P801B  
R301  
R302  
R303  
R305  
R315  
R402  
R403  
R405  
R411  
R412  
R413  
R414  
R420  
R453  
R601  
R715  
R805  
R816  
ZZ200  
C101  
C102  
C103  
C114  
C123  
C124  
C125  
C235  
C305  
C308  
C311  
C312  
PART CODE  
4856310300  
4856310600  
4856310600  
4856310600  
4856310600  
4856310300  
4856310300  
4856310300  
4856310300  
4856310600  
4856310300  
4856310300  
4856310300  
4856310300  
4856310600  
4856310600  
4856310600  
4856310600  
4856310600  
4856310600  
4856310300  
4856310600  
4856310600  
4856310600  
4856310600  
4856310300  
4856310300  
4857417500  
4857417500  
4857417500  
4857417500  
485923182S  
485923172S  
485923162S  
485923162S  
4857417500  
4857417500  
RS02Z471JS  
RS02Z561JS  
RS02Z109JS  
RS02Z181JS  
RS02Z751JS  
RS02Z302JS  
RS02Z163JS  
RS02Z241JS  
RS02Z150JS  
RS02Z279JS  
RS02Z109JS  
RS02Z109JS  
RS02Z620JS  
RS02Z270JS  
RF01Z688K-  
RS02Z680JS  
RS02Z228JS  
RS02Z150JS  
PTMPJRK123  
CEXF1H109V  
CEXF1C101V  
CEXF1H479V  
CEXF1C101V  
CEXF1H478V  
CMXM2A103J  
CEXF1H228V  
CEXD1H229F  
CEXF1H101V  
CMXM2A104J  
CEXD1H229Q  
CMXL1J105J  
PART NAME  
EYE LET  
EYE LET  
EYE LET  
EYE LET  
EYE LET  
EYE LET  
EYE LET  
EYE LET  
EYE LET  
EYE LET  
EYE LET  
EYE LET  
EYE LET  
EYE LET  
EYE LET  
EYE LET  
EYE LET  
EYE LET  
EYE LET  
EYE LET  
EYE LET  
EYE LET  
EYE LET  
EYE LET  
EYE LET  
EYE LET  
EYE LET  
TERM PIN  
TERM PIN  
TERM PIN  
TERM PIN  
DESCRIPTION  
BSR T0.2 (R1.6)  
BSR T0.2 (R2.3)  
BSR T0.2 (R2.3)  
BSR T0.2 (R2.3)  
BSR T0.2 (R2.3)  
BSR T0.2 (R1.6)  
BSR T0.2 (R1.6)  
BSR T0.2 (R1.6)  
BSR T0.2 (R1.6)  
BSR T0.2 (R2.3)  
BSR T0.2 (R1.6)  
BSR T0.2 (R1.6)  
BSR T0.2 (R1.6)  
BSR T0.2 (R1.6)  
BSR T0.2 (R2.3)  
BSR T0.2 (R2.3)  
BSR T0.2 (R2.3)  
BSR T0.2 (R2.3)  
BSR T0.2 (R2.3)  
BSR T0.2 (R2.3)  
BSR T0.2 (R1.6)  
BSR T0.2 (R2.3)  
BSR T0.2 (R2.3)  
BSR T0.2 (R2.3)  
REMARK  
LOC  
C401  
C403  
C411  
C413  
C416  
C418  
C451  
C452  
C501  
C502  
C506  
C514  
C516  
C517  
C520  
C523  
C524  
C526  
C576  
C603  
C604  
C605  
C613  
C614  
C634  
C662  
C701  
C706  
C707  
C712  
C816  
C821  
C835  
C871  
C878  
C890  
C893  
F801  
I803  
PART CODE  
CCXB2H102K  
CMXM2A103J  
CEXF1H470V  
CCXB2H102K  
CCXB2H102K  
CMXM2A104J  
CEXF1C101V  
CEXF1H100V  
CMXM2A103J  
CEXF1H109V  
CMXM2A103J  
CMXL1J105J  
CMXM2A104J  
CEXD1H229F  
CEXF1H109V  
CEXF1H109V  
CMXM2A153J  
CEXF1H100V  
CEXF1C101V  
CEXF1H108V  
CEXF1C220V  
CEXF1H470V  
CEXF1H108V  
CEXF1C220V  
CEXF1H100V  
CMXM2A153J  
CEXF1C101V  
CEXF1C101V  
CEXF1C101V  
CEXF1H109V  
CEXF1C101V  
CEXF1C470V  
CEXF1H229V  
CMXL1J104J  
CEXF2C109V  
CEXF1H470V  
CEXF1H479V  
5FWPS4022L  
1K1A431B—  
58CX430599  
58CX430599  
TKSC2330Y-  
TKTC3205Y-  
TKTC3198Y-  
TKTA1266Y-  
TKTC3198Y-  
TKTA1266Y-  
TKSA1013Y-  
TKTC3198Y-  
TKTC3198Y-  
TKTC3205Y-  
TKTC3198Y-  
TKTC3198Y-  
TKTC3205Y-  
TKTC3205Y-  
TKTC3198Y-  
RN01B913JS  
5S50101090  
5S50101090  
5S50101090  
5S50101090  
5S50101090  
5S50101090  
5XEX3R579C  
5PXXT4R5MB  
5PXLT4R5MT  
PTMPJAK123  
2TM14006LB  
PART NAME  
C CERA  
C MYLAR  
C ELECTRO  
C CERA  
DESCRIPTION  
500V B 1000PF K (TAPPING)  
100V 0.01MF J (TP)  
50V RSS 47MF (6.3X11) TP  
500V B 1000PF K (TAPPING)  
500V B 1000PF K (TAPPING)  
100V 0.1MF J (TP)  
16V RSS 100MF (6.3X11) TP  
50V RSS 10MF (5X11) TP  
100V 0.01MF J (TP)  
50V RSS 1MF (5X11) TP  
100V 0.01MF J (TP)  
63V MEU 1MF J  
REMARK  
C CERA  
C MYLAR  
C ELECTRO  
C ELECTRO  
C MYLAR  
C ELECTRO  
C MYLAR  
C MYLAR  
C MYLAR  
C ELECTRO  
C ELECTRO  
C ELECTRO  
C MYLAR  
C ELECTRO  
C ELECTRO  
C ELECTRO  
C ELECTRO  
C ELECTRO  
C ELECTRO  
C ELECTRO  
C ELECTRO  
C MYLAR  
C ELECTRO  
C ELECTRO  
C ELECTRO  
C ELECTRO  
C ELECTRO  
C ELECTRO  
C ELECTRO  
C MYLAR  
C ELECTRO  
C ELECTRO  
C ELECTRO  
FUSE  
IC REGULATOR(SHUNT)  
COIL CHOKE  
COIL CHOKE  
TR  
TR  
TR  
TR  
TR  
TR  
TR  
TR  
TR  
TR  
TR  
TR  
TR  
TR  
TR  
100V 0.1MF J (TP)  
50V RND 2.2MF (5X11) TP  
50V RSS 1MF (5X11) TP  
50V RSS 1MF (5X11) TP  
100V 0.015MF J (TP)  
50V RSS 10MF (5X11) TP  
16V RSS 100MF (6.3X11) TP  
50V RSS 0.1MF (5X11) TP  
RSS 16V 22MF 5*11  
50V RSS 47MF (6.3X11) TP  
50V RSS 0.1MF (5X11) TP  
RSS 16V 22MF 5*11  
50V RSS 10MF (5X11) TP  
100V 0.015MF J (TP)  
16V RSS 100MF (6.3X11) TP  
16V RSS 100MF (6.3X11) TP  
16V RSS 100MF (6.3X11) TP  
50V RSS 1MF (5X11) TP  
16V RSS 100MF (6.3X11) TP  
16V RSS 47MF (5X11) TP  
50V RSS 2.2MF (5X11) TP  
63V MEU 0.1MF J  
160V RSS 1MF (6.3X11) TP  
50V RSS 47MF (6.3X11) TP  
50V RSS 4.7MF (5X11) TP  
WIDE TL 250V 4A CASE  
KIA431B 2.495V 0.5% TO-92  
AZ-9004Y 940K TP  
AZ-9004Y 940K TP  
KSC2330Y (TP)  
KTC3205Y (TP)  
KTC3198Y  
KTA1266Y (TP)  
KTC3198Y  
KTA1266Y (TP)  
KSA1013Y (TP)  
KTC3198Y  
KTC3198Y  
KTC3205Y (TP)  
KTC3198Y  
KTC3198Y  
KTC3205Y (TP)  
KTC3205Y (TP)  
KTC3198Y  
1W 91K OHM J SMALL  
THVH472GCA  
THVH472GCA  
THVH472GCA  
THVH472GCA  
THVH472GCA  
THVH472GCA  
BSR T0.2 (R2.3)  
BSR T0.2 (R1.6)  
BSR T0.2 (R1.6)  
DA-IB0214(D2.3/DY PIN)  
DA-IB0214(D2.3/DY PIN)  
DA-IB0214(D2.3/DY PIN)  
DA-IB0214(D2.3/DY PIN)  
YW025-05 (STICK)  
YW025-04 (STICK)  
YW025-03 (STICK)  
YW025-03 (STICK)  
DA-IB0214(D2.3/DY PIN)  
DA-IB0214(D2.3/DY PIN)  
2W 470 OHM J SMALL  
2W 560 OHM J SMALL  
2W 1 OHM J SMALL  
2W 180 OHM J SMALL  
2W 750 OHM J SMALL  
2W 3K OHM J SMALL  
2W 16K OHM J SMALL  
2W 240 0HM J SMALL  
2W 15 OHM J SMALL  
2W 2.7 OHM J SMALL  
2W 1 OHM J SMALL  
2W 1 OHM J SMALL  
2W 62 OHM J SMALL  
2W 27 OHM J SMALL  
1W 0.68 OHM K (TAPPING)  
2W 68 OHM J SMALL  
2W 0.22 OHM J SMALL  
2W 15 OHM J SMALL  
DTQ-21U4SSN  
50V RSS 1MF (5X11) TP  
16V RSS 100MF (6.3X11) TP  
50V RSS 4.7MF (5X11) TP  
16V RSS 100MF (6.3X11) TP  
50V RSS 0.47MF (5X11) TP  
100V 0.01MF J (TP)  
50V RSS 0.22MF (5X11) TP  
50V RND 2.2MF (5X11) TP  
50V RSS 100MF (8X11.5) TP  
100V 0.1MF J (TP)  
50V RT 2.2MF (6.3X11) TP  
63V MEU 1MF J  
CONN WAFER  
CONN WAFER  
CONN WAFER  
CONN WAFER  
TERM PIN  
TERM PIN  
R M-OXIDE FILM  
R M-OXIDE FILM  
R M-OXIDE FILM  
R M-OXIDE FILM  
R M-OXIDE FILM  
R M-OXIDE FILM  
R M-OXIDE FILM  
R M-OXIDE FILM  
R M-OXIDE FILM  
R M-OXIDE FILM  
R M-OXIDE FILM  
R M-OXIDE FILM  
R M-OXIDE FILM  
R M-OXIDE FILM  
R FUSIBLE  
R M-OXIDE FILM  
R M-OXIDE FILM  
R M-OXIDE FILM  
PCB MAIN RADIAL AS  
C ELECTRO  
C ELECTRO  
C ELECTRO  
C ELECTRO  
C ELECTRO  
C MYLAR  
L601  
L805  
Q401  
Q403  
Q404  
Q501  
Q545  
Q546  
Q575  
Q653  
Q654  
Q701  
Q703  
Q707  
Q801  
Q807  
Q873  
R809  
SW701  
SW702  
SW703  
SW704  
SW705  
SW706  
X502  
Z501  
Z502A  
ZZ200  
10  
R METAL FILM  
SW TACT  
SW TACT  
SW TACT  
SW TACT  
SW TACT  
SW TACT  
CRYSTAL QUARTZ  
FILTER CERA  
FILTER CERA  
PCB MAIN AXIAL AS  
TAPE MASKING  
C ELECTRO  
C ELECTRO  
C ELECTRO  
C MYLAR  
C ELECTRO  
C MYLAR  
HC-49/U 3.579545M (TP)  
XT 4.5MB-TP  
LT 4.5MH-TP  
DTQ-21U4SSN  
3M #232 6.0X2000M  
17  
ELECTRICAL PARTS LIST  
LOC  
PART CODE  
2TM10006LB  
4859816692  
CCZF1H103Z  
CCZF1H103Z  
CCZF1H103Z  
CZSL1H470J  
CCZB1H471K  
CCZF1H103Z  
CBZF1H104Z  
CZCH1H180J  
CCZB1H101K  
CCZB1H101K  
CCZB1H222K  
CBZF1H104Z  
CCZF1H103Z  
CCZF1H103Z  
CCZF1H103Z  
CBZF1H104Z  
CCZF1H103Z  
CCZF1H103Z  
CCZF1H103Z  
CCZB1H221K  
CCZB1H102K  
CCZF1H103Z  
CBZF1H104Z  
CCZF1H103Z  
CCZB1H102K  
CCZB1H821K  
CCZB1H471K  
CCZB1H333K  
DUZ33B——  
DUZ5R1B—-  
D1N4004S—  
DBZX55C62-  
85801060GY  
D1N4937G—  
D1N4937G—  
D1N4937G—  
D1N4937G—  
D1N4937G—  
D1N4148—-  
D1N4937G—  
DUZ5R1B—-  
DMTZJ5R6B-  
DUZ9R1BM—  
D1N4148—-  
D1N4148—-  
D1N4148—-  
D1N4148—-  
D1N4148—-  
D1N4148—-  
D1N4148—-  
D1N4937G—  
DMTZJ6R8C-  
D1N4937G—  
D1N4148—-  
D1N4937G—  
D1N4937G—  
DUZ9R1BM—  
D1N4937G—  
DUZ9R1BM—  
DLT2A05G—  
DLT2A05G—  
DLT2A05G—  
DLT2A05G—  
85801060GY  
85801060GY  
85801060GY  
PART NAME  
TAPE MASKING  
PCB MAIN  
C CERA  
C CERA  
C CERA  
C CERA  
C CERA  
C CERA  
C CERA SEMI  
C CERA  
C CERA  
C CERA  
C CERA  
C CERA SEMI  
C CERA  
C CERA  
C CERA  
C CERA SEMI  
C CERA  
C CERA  
C CERA  
C CERA  
C CERA  
C CERA  
C CERA SEMI  
C CERA  
C CERA  
C CERA  
C CERA  
DESCRIPTION  
3M #232-MAP-C 6.2X2000M  
330X246 S1B  
50V F 0.01MF Z  
50V F 0.01MF Z  
REMARK  
LOC  
J004  
J006  
J007  
J008  
J009  
J010  
J011  
J012  
J013  
J014  
J015  
J016  
J017  
J018  
J019  
J020  
J021  
J022  
J023  
J024  
J025  
J026  
J027  
J028  
J029  
J030  
J031  
J032  
J033  
J034  
J035  
J036  
J037  
J038  
J039  
J040  
J041  
J042  
J043  
J045  
J046  
J048  
J049  
J050  
J051  
J052  
J053  
J054  
J055  
J056  
J057  
J058  
J059  
J060  
J061  
J062  
J063  
J064  
J065  
J066  
J067  
J068  
J069  
J070  
J071  
J072  
J073  
J074  
PART CODE  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
PART NAME  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
DESCRIPTION  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
REMARK  
20  
A001  
C109  
C115  
C116  
C118  
C122  
C152  
C503  
C505  
C507  
C508  
C515  
C519  
C522  
C525  
C561  
C612  
C708  
C711  
C713  
C714  
C715  
C716  
C717  
C718  
C720  
C891  
C892  
C894  
D101  
D102  
D301  
D311  
D312  
D401  
D405  
D406  
D407  
D408  
D409  
D451  
D501  
D506  
D507  
D509  
D525  
D571  
D572  
D573  
D574  
D601  
D804  
D809  
D811  
D812  
D813  
D816  
D817  
D819  
D851  
D881  
D882  
D883  
D884  
J001  
J002  
J003  
50V F 0.01MF Z  
50V SL 47PF J (AXIAL)  
50V B 470PF K (AXIAL)  
50V F 0.01MF Z  
50V F 0.1MF Z  
50V CH 18PF J (AXIAL)  
50V B 100PF K (AXIAL)  
50V B 100PF K (AXIAL)  
50V B 2200PF K AXIAL  
50V F 0.1MF Z  
50V F 0.01MF Z  
50V F 0.01MF Z  
50V F 0.01MF Z  
50V F 0.1MF Z  
50V F 0.01MF Z  
50V F 0.01MF Z  
50V F 0.01MF Z  
50V B 220PF K (AXIAL)  
50V B 1000PF K (AXIAL)  
50V F 0.01MF Z  
50V F 0.1MF Z  
50V F 0.01MF Z  
50V B 1000PF K (AXIAL)  
50V B 820PF K AXIAL  
50V B 470PF K (AXIAL)  
50V B 0.033MF K AXL  
UZ-33B  
UZ-5.1B  
1N4004S  
BZX55C-62  
1/0.6 TIN COATING  
1N4937G (TAPPING)  
1N4937G (TAPPING)  
1N4937G (TAPPING)  
1N4937G (TAPPING)  
1N4937G (TAPPING)  
1N4148 (TAPPING)  
1N4937G (TAPPING)  
UZ-5.1B  
C CERA  
DIODE ZENER  
DIODE ZENER  
DIODE  
DIODE ZENER  
WIRE COPPER  
DIODE  
DIODE  
DIODE  
DIODE  
DIODE  
DIODE  
DIODE  
DIODE ZENER  
DIODE ZENER  
DIODE ZENER  
DIODE  
DIODE  
DIODE  
DIODE  
DIODE  
DIODE  
DIODE  
DIODE  
DIODE ZENER  
DIODE  
DIODE  
DIODE  
DIODE  
DIODE ZENER  
DIODE  
DIODE ZENER  
DIODE  
DIODE  
DIODE  
DIODE  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
MTZJ 5.6B  
UZ-9.1BM  
1N4148 (TAPPING)  
1N4148 (TAPPING)  
1N4148 (TAPPING)  
1N4148 (TAPPING)  
1N4148 (TAPPING)  
1N4148 (TAPPING)  
1N4148 (TAPPING)  
1N4937G (TAPPING)  
MTZJ 6.8C  
1N4937G (TAPPING)  
1N4148 (TAPPING)  
1N4937G (TAPPING)  
1N4937G (TAPPING)  
UZ-9.1BM  
1N4937G (TAPPING)  
UZ-9.1BM  
LT2A05G (TP)  
LT2A05G (TP)  
LT2A05G (TP)  
LT2A05G (TP)  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
18  
ELECTRICAL PARTS LIST  
LOC  
J075  
J076  
J077  
J078  
J080  
J083  
J084  
J085  
J086  
J087  
J088  
J089  
J090  
J091  
J092  
J093  
J094  
J095  
J096  
J097  
J098  
J099  
J100  
J101  
J102  
J103  
J104  
J105  
J106  
J107  
J108  
J109  
J110  
J111  
J112  
J113  
J114  
J115  
J116  
J117  
J118  
J119  
J120  
J121  
J122  
J123  
J124  
J125  
J126  
J127  
J128  
J129  
J130  
J131  
J132  
J133  
J135  
J230  
L111  
L501  
L602  
L603  
L631  
L807  
L811  
L841  
R112  
R115  
PART CODE  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
5CPZ568M02  
5CPZ180K02  
5MC0000100  
5MC0000100  
85801060GY  
5MC0000100  
5MC0000100  
5MC0000100  
RD-AZ331J-  
RD-AZ471J-  
PART NAME  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
COIL PEAKING  
COIL PEAKING  
COIL BEAD  
DESCRIPTION  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
0.56UH M (AXIAL 3.5MM)  
18UH K (AXIAL 3.5MM)  
HC-3550  
REMARK  
LOC  
R117  
R150  
R151  
R229  
R230  
R306  
R307  
R308  
R309  
R310  
R312  
R350  
R351  
R352  
R401  
R415  
R416  
R417  
R423  
R424  
R451  
R452  
R454  
R502  
R504  
R505  
R507  
R508  
R510  
R511  
R512  
R513  
R514  
R515  
R516  
R517  
R518  
R520  
R521  
R522  
R523  
R524  
R526  
R527  
R528  
R529  
R530  
R531  
R532  
R602  
R603  
R604  
R605  
R606  
R607  
R629  
R630  
R652  
R654  
R655  
R656  
R701  
R702  
R703  
R704  
R706  
R708  
R710  
PART CODE  
RD-AZ331J-  
RD-AZ102J-  
RD-AZ104J-  
RD-AZ750J-  
RD-AZ101J-  
RD-AZ682J-  
RD-AZ243J-  
RD-AZ202J-  
RD-AZ822J-  
RD-AZ303J-  
RD-AZ104J-  
RD-AZ102J-  
RD-AZ302J-  
RD-AZ123J-  
RD-4Z472J-  
RD-4Z224J-  
RD-2Z121J-  
RD-4Z302J-  
RD-AZ102J-  
RD-AZ202J-  
RD-4Z123J-  
RD-4Z912J-  
RD-AZ102J-  
RD-AZ822J-  
RD-AZ124J-  
RD-4Z103J-  
RD-AZ103J-  
RD-AZ103J-  
RD-AZ105J-  
RD-AZ123J-  
RD-AZ392J-  
RD-AZ152J-  
RD-AZ152J-  
RD-AZ152J-  
RD-AZ101J-  
RD-AZ101J-  
RD-AZ102J-  
RD-AZ473J-  
RD-AZ222J-  
RD-AZ433J-  
RD-AZ473J-  
RD-AZ682J-  
RD-AZ432J-  
RD-AZ223J-  
RD-AZ223J-  
RD-AZ222J-  
RD-AZ101J-  
RD-AZ101J-  
RD-AZ101J-  
RD-2Z271J-  
RD-AZ103J-  
RD-AZ512J-  
RD-AZ202J-  
RD-AZ223J-  
RD-AZ153J-  
RD-AZ102J-  
RD-AZ104J-  
RD-AZ102J-  
RD-AZ242J-  
RD-AZ242J-  
85801060GY  
RD-AZ123J-  
RD-AZ223J-  
RD-AZ471J-  
RD-AZ471J-  
RD-AZ102J-  
RD-AZ223J-  
RD-AZ103J-  
PART NAME  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
WIRE COPPER  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
DESCRIPTION  
1/6 330 OHM J  
1/6 1K OHM J  
1/6 100K OHM J  
1/6 75 OHM J  
REMARK  
1/6 100 OHM J  
1/6 6.8K OHM J  
1/6 24K OHM J  
1/6 2K OHM J  
1/6 8.2K OHM J  
1/6 30K OHM J  
1/6 100K OHM J  
1/6 1K OHM J  
1/6 3K OHM J  
1/6 12K OHM J  
1/4 4.7K OHM J  
1/4 220K OHM J  
1/2 120 OHM J  
1/4 3K OHM J  
1/6 1K OHM J  
1/6 2K OHM J  
1/4 12K OHM J  
1/4 9.1K OHM J  
1/6 1K OHM J  
1/6 8.2K OHM J  
1/6 120K OHM J  
1/4 10K OHM J  
1/6 10K OHM J  
1/6 10K OHM J  
1/6 1M OHM J  
1/6 12K OHM J  
1/6 3.9K OHM J  
1/6 1.5K OHM J  
1/6 1.5K OHM J  
1/6 1.5K OHM J  
1/6 100 OHM J  
1/6 100 OHM J  
1/6 1K OHM J  
1/6 47K OHM J  
1/6 2.2K OHM J  
1/6 43K OHM J  
1/6 47K OHM J  
1/6 6.8K OHM J  
1/6 4.3K OHM J  
1/6 22K OHM J  
1/6 22K OHM J  
1/6 2.2K OHM J  
1/6 100 OHM J  
1/6 100 OHM J  
1/6 100 OHM J  
1/2 270 OHM J  
1/6 10K OHM J  
1/6 5.1K OHM J  
1/6 2K OHM J  
1/6 22K OHM J  
1/6 15K OHM J  
1/6 1K OHM J  
1/6 100K OHM J  
1/6 1K OHM J  
1/6 2.4K OHM J  
1/6 2.4K OHM J  
1/0.6 TIN COATING  
1/6 12K OHM J  
1/6 22K OHM J  
1/6 470 OHM J  
1/6 470 OHM J  
1/6 1K OHM J  
1/6 22K OHM J  
1/6 10K OHM J  
COIL BEAD  
WIRE COPPER  
COIL BEAD  
COIL BEAD  
COIL BEAD  
HC-3550  
1/0.6 TIN COATING  
HC-3550  
HC-3550  
HC-3550  
R CARBON FILM  
R CARBON FILM  
1/6 330 OHM J  
1/6 470 OHM J  
19  
ELECTRICAL PARTS LIST  
LOC  
R711  
R712  
R713  
R714  
R716  
R717  
R718  
R719  
R720  
R722  
R723  
R724  
R725  
R726  
R730  
R730A  
R731  
R732  
R733  
R734  
R750  
R751  
R789  
R790  
R814  
R815  
R819  
R820  
R823  
R835  
R868  
R869  
R872  
R874  
R875  
R876  
R877  
R878  
R879  
R881  
R885  
R890  
R892  
R893  
R894  
ZZ300  
C906  
C914  
P102A  
P401A  
Q901  
Q902  
Q903  
SCT1  
ZZ200  
E001  
E002  
E003  
E004  
ZZ200  
L901  
PART CODE  
RD-AZ472J-  
RD-AZ102J-  
RD-AZ103J-  
RD-AZ479J-  
RD-AZ102J-  
RD-AZ102J-  
RD-AZ154J-  
RD-AZ472J-  
RD-AZ201J-  
RD-AZ101J-  
RD-AZ223J-  
RD-AZ682J-  
RD-AZ682J-  
RD-AZ223J-  
85801060GY  
RD-AZ433J-  
RD-AZ472J-  
RD-AZ242J-  
RD-AZ392J-  
RD-AZ752J-  
RD-AZ472J-  
RD-AZ472J-  
RD-AZ102J-  
RD-AZ102J-  
85801060GY  
85801060GY  
RD-AZ103J-  
RD-AZ392J-  
RD-4Z561J-  
RD-4Z109J-  
RN-4Z2201F  
RD-AZ103J-  
RD-4Z152J-  
85801060GY  
RD-AZ622J-  
RD-AZ472J-  
RD-AZ103J-  
RN-4Z1003F  
RN-4Z7501F  
RC-2Z565KP  
RC-2Z565KP  
RD-4Z152J-  
RD-4Z152J-  
RD-4Z331J-  
RD-4Z479J-  
PTCPMSK123  
CH1BEE222M  
CEYF2E100V  
4850705S04  
4850704S04  
TKTC3229—  
TKTC3229—  
TKTC3229—  
4859304130  
PTCPJBK123  
4856310300  
4856310300  
4856310300  
4856310300  
PTCPJRK123  
5CPX181J—  
TKTC3198Y-  
TKTC3198Y-  
TKTC3198Y-  
TKTA1266Y-  
RN02B243JS  
RN02B243JS  
RN02B243JS  
PART NAME  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
WIRE COPPER  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
WIRE COPPER  
WIRE COPPER  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R METAL FILM  
R CARBON FILM  
R CARBON FILM  
WIRE COPPER  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R METAL FILM  
R METAL FILM  
R CARBON COMP  
R CARBON COMP  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
PCB CRT MANUAL AS  
C CERA AC  
DESCRIPTION  
1/6 4.7K OHM J  
1/6 1K OHM J  
1/6 10K OHM J  
1/6 4.7 OHM J  
REMARK  
LOC  
R924  
R925  
R926  
ZZ200  
10  
PART CODE  
RN02B243JS  
RN02B243JS  
RN02B243JS  
PTCPJAK123  
2TM14006LB  
2TM10006LB  
4859807660  
CCZB1H271K  
CCZB1H271K  
CCZB1H271K  
CCZB1H152K  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
85801060GY  
RD-AZ471J-  
RD-AZ471J-  
RD-AZ471J-  
RD-AZ151J-  
RD-AZ151J-  
RD-AZ151J-  
RD-AZ121J-  
RD-AZ121J-  
RD-AZ121J-  
RD-AZ561J-  
RD-AZ472J-  
RD-2Z272J-  
RD-2Z272J-  
RD-2Z272J-  
RD-AZ471J-  
RD-AZ471J-  
RD-AZ471J-  
RD-AZ221J-  
85801060GY  
PART NAME  
R METAL FILM  
R METAL FILM  
R METAL FILM  
PCB CRT AXIAL AS  
TAPE MASKING  
TAPE MASKING  
PCB UNION  
C CERA  
C CERA  
C CERA  
C CERA  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
WIRE COPPER  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
R CARBON FILM  
WIRE COPPER  
DESCRIPTION  
2W 24K OHM J SMALL  
2W 24K OHM J SMALL  
2W 24K OHM J SMALL  
DTQ-21U4SSN  
3M #232 6.0X2000M  
3M #232-MAP-C 6.2X2000M  
108X93(246X246/4) DIB  
50V B 270PF K  
REMARK  
1/6 1K OHM J  
1/6 1K OHM J  
20  
1/6 150K OHM J  
1/6 4.7K OHM J  
1/6 200 OHM J  
1/6 100 OHM J  
1/6 22K OHM J  
1/6 6.8K OHM J  
1/6 6.8K OHM J  
1/6 22K OHM J  
1/0.6 TIN COATING  
1/6 43K OHM J  
1/6 4.7K OHM J  
1/6 2.4K OHM J  
1/6 3.9K OHM J  
1/6 7.5K OHM J  
1/6 4.7K OHM J  
1/6 4.7K OHM J  
1/6 1K OHM J  
A001  
C901  
C902  
C903  
C907  
D901  
J901  
J902  
J903  
J904  
R901  
R902  
R903  
R904  
R905  
R906  
R907  
R908  
R909  
R913  
R914  
R918  
R919  
R920  
R927  
R928  
R929  
R930  
R935  
50V B 270PF K  
50V B 270PF K  
50V B 1500PF K (AXIAL)  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/6 470 OHM J  
1/6 470 OHM J  
1/6 470 OHM J  
1/6 150 OHM J  
1/6 150 OHM J  
1/6 150 OHM J  
1/6 120 OHM J  
1/6 120 OHM J  
1/6 120 OHM J  
1/6 560 OHM J  
1/6 4.7K OHM J  
1/2 2.7K OHM J  
1/2 2.7K OHM J  
1/6 1K OHM J  
1/0.6 TIN COATING  
1/0.6 TIN COATING  
1/6 10K OHM J  
1/6 3.9K OHM J  
1/4 560 OHM J  
1/4 1 OHM J  
1/2 2.7K OHM J  
1/6 470 OHM J  
1/6 470 OHM J  
1/6 470 OHM J  
1/6 220 OHM J  
1/0.6 TIN COATING  
1/4 2.20K OHM F  
1/6 10K OHM J  
1/4 1.5K OHM J  
1/0.6 TIN COATING  
1/6 6.2K OHM J  
1/6 4.7K OHM J  
1/6 10K OHM J  
1/4 100K OHM F  
1/4 7.5K OHM F  
1/2 5.6M OHM K  
1/2 5.6M OHM K  
1/4 1.5K OHM J  
1/4 1.5K OHM J  
1/4 330 OHM J  
1/4 4.7 OHM J  
DTQ-21U4SSN  
U/C/V 2.5KV 2200PF TP  
250V RSS 10MF (10X20)  
YH025-05+YBNH250+ULW=400  
YH025-04+YST025+ULW=400  
KTC3229  
KTC3229  
KTC3229  
ISHG93S  
DTQ-21U4SSN  
BSR T0.2 (R1.6)  
BSR T0.2 (R1.6)  
BSR T0.2 (R1.6)  
BSR T0.2 (R1.6)  
DTQ-21U4SSN  
180UH J (RADIAL)  
KTC3198Y  
KTC3198Y  
KTC3198Y  
KTA1266Y (TP)  
2W 24K OHM J SMALL  
2W 24K OHM J SMALL  
2W 24K OHM J SMALL  
C ELECTRO  
CONNECTOR  
CONNECTOR  
TR  
TR  
TR  
SOCKET CRT  
PCB CRT M-10 AS  
EYE LET  
EYE LET  
EYE LET  
EYE LET  
PCB CRT RADIAL AS  
COIL PEAKING  
TR  
TR  
TR  
Q904  
Q905  
Q906  
Q907  
R921  
R922  
R923  
TR  
R METAL FILM  
R METAL FILM  
R METAL FILM  
20  
ELECTRICAL PARTS LIST  
110V / FREE VOLT DIFFERENTIAL PARTS LIST  
LOC  
PARTS_NAME  
DTQ-2133/21U4SSN  
PARTS_DESC.  
DTQ-2133SSFN  
PARTS_DESC.  
S/N  
S/N  
00020  
C804  
C810  
ADAPTER  
C ELECTRO  
C CERA  
4859000240  
2P15A 300V(D=4.0)  
CEYD2D331D 200V FHS 330MF(22X30)  
CEYD2G181D 400V FHS 180MF(25X35)  
CCXB2H222K  
CCXB2H222K  
500V B 2200PF K (TAPPING)  
500V B 2200PF K (TAPPING)  
CCXB3A472K  
CCXB3A472K  
1KV B 4700PF K (TAPPING)  
1KV B 4700PF K (TAPPING)  
C811  
C CERA  
I801  
HEAT SINK ASS’Y  
CORD POWER AS  
PTE2SW7912 1STRW6735- + 7174300811 PTD2SW7912 1STRW6735- + 7174300811  
4859902710 KJ-10+SPT-2+YPT018=2100 4859900910  
PWC1  
R805  
R882  
KKP-419C+YPT-018=2100  
R M-OXIDE FILM RS02Z228JS  
2W 0.22 OHM J SMALL  
RS02Z338JS 2W 0.33 OHM J SMALL  
DDB7R0M290 ECPBD7R0M290  
POSISTOR DDB3R0M140 ECPBD3R0M140  
CRT DIFFERENTIAL PART LIST(LG PHILIPS, DOMEX)  
NO  
1
L/C  
PART NAME  
CRT  
LG PHILIPS SLIM  
4859641460  
DOMEX  
REMARKS  
V901  
485964060  
CRT DIFFERENTIAL  
(A51QDJ470X03)  
RS02Z279JS  
(A51QDK090X030)  
RS02Z309JS  
2
3
R412  
R302  
R M-OXIDE  
FILE  
HEATER VOLTAGE  
VERTICAL CENTER  
(2W, 2.7  
)
(2W, 3  
RS02Z681JS  
(2W, 680  
)
R M-OXIDE  
FILM  
RS02Z561JS  
(2W, 560  
)
)
21  
IC DESCRIPTION  
I. MICOM Outline.  
1. Abstract.  
This specification is 1-Tunner Mono Model for North America, CCD 1-Chip MICOM M37150.  
It is developing software specification for tuning only NTSC system TV F/S.  
2. H/W Outline.  
1) ROM : 32K x 8bits.tsc  
2) RAM : 1152 x 8bits.  
3) OSD Function.  
. Screen Display.  
32 characters x 2 lines.  
- Characters.  
254 patterns programmable.  
- Character display area  
CC mode : 16 x 26 dots  
- Chatacter color : 8 colors  
- Attribute  
CC mode : smooth italic, underline, flash, automatic solid space"  
OSD mode : border  
- Display position  
Horizontal : 128 levels  
Vertical : 512 levels  
3. System Feature.  
- The system for TV tuning is Frequency Synthesis type.  
- Closed Caption’s function is built in IC.  
- On Screen Display’s function is built in IC.  
- Package.  
: 42 PIN SSOP.  
- Tuner (Pre-scaler.) : I2C Bus. --- DT5-NF20F N  
- Remote.  
: R-43A Series  
- E2PROM.  
: 24C04(I2C Bus) ? Apply one byte Read/Write mode.  
- 6-Local Key.  
- Option S/W  
: A/D Input Control.(Power, Ch Up/Down, Vol Up/Down, Menu)  
: Port Input Option Check.  
- IF/V/C/D IC :M61250(America, The only NTSC)"  
4. Function.  
1) C. C. D. function.  
- A section of C. C. D. operates FCC based specification.  
2) C. C. D. controlled function.  
22  
IC DESCRIPTION  
- Closed Caption Mode. (Off<-->C1<-->C2<-->T1<-->T2<-->Off)  
- CC On Mute.(Off / On)  
- When CC On Mute is On, Output is selected a item of Closed Caption Modes.  
3) Tuning Function.  
- I2C Bus.  
- PLL IC Interface.  
- FS 181 Channel (AIR 2-69CH, CABLE 1-125CH)"  
- AFT Operation(Fine Tuning ) -2.5 ~ Fn ~ +2.5MHz  
- AIR/CABLE (STD, HRC, IRC ). Only Cable 5,6CH is that AFT range is cover over  
broad-band. -2.5MHz ~ Fn ~ +3.5MHz.  
- Auto Program.(If a channel is broadcasting, the channel is memorized.)"  
- Direct Tuning(0 ~ 9KEY)  
- Channel Up/Down.(Memorized Channels) -> The Ch Up/Down buttons on the Remote and  
on the front panel are same function.  
- Search Channel Up/Down.(If No-Memory or only 1CH is Memory)  
- Channel Memory.(ADD/DELETE)  
- Channel Review Function.  
- Last Channel Memory Function.  
4) OSD Function.  
- In Video Mode, Things(Items) that is concerned with Air and Cable disappear in the Menu."  
- Channel, AV display.  
- Small & Graphic ICON Menu.  
- Volume, Picture Control --> I2C Bus Control  
5) The Others Function.  
- Video/Audio Mute Function.  
- If a Channel is no signal, it is Auto-Power Off Function after 15 minutes."  
- Heat Run Function. --- OSD White Background.  
- Sleep Timer, Wake-Up Time, Off Time Function. "  
- Audio Mode :Mono  
- TV/Line Controlled function- ----------------------- (Option)  
- Prison Controlled function- ----------------------- (Option)  
- 3-Language.(North America : ENG/SPA/FRA ).  
-
-
-
E2PROM Interface (I2C Bus Control)  
CH 6 TRAP Function.(IS-31  
)
PLL IC Band Data.(Control Byte 2-->P3~P0)  
VHF L : 1 / VHF H : 2 / CH6 TRAP : 5 (IS-31) AIR(Cable) CH 6 Only UHF : 8  
23  
IC DESCRIPTION  
5. The Table of Option and Schedule  
PIN  
OPTION  
REFERENCE  
REMARKS  
#1  
TV ONLY (H)  
LOW (DC 0V): VIDEO  
HIGH (DC 5V) : TV  
LOW (DC 0V): NORMAL  
HIGH (DC 5V) : PRISON  
(L) : Video Model (“V” Series)  
(H) : No Video Model (“P” Series)  
(L) : Normal Video  
#41  
PRISON  
(H) : Clock Menu (TIME) delete  
6. KEY Matrix  
R731  
4.7K  
R732  
2.4K  
R733  
3.9K  
R734  
7.5K  
R730A  
43K  
5V  
POWER  
VOL +  
VOL -  
CH +  
CH -  
MENU  
KEY  
FUNCTION  
POWER  
VOL +  
VOL -  
VALUE(V)  
0 ~ 0.55  
SW701  
SW703  
SW704  
SW705  
SW706  
SW702  
2.25 ~ 2.75  
2.76 ~ 3.25  
3.26 ~ 3.75  
3.76 ~ 4.25  
4.26 ~ 4.75  
CH +  
CH -  
MENU  
24  
Ap p e n d ix  
IC DESCRIPTIO N  
II. PIN ASSIGN  
42  
41  
40  
39  
38  
37  
36  
TV ONLY  
TV / Y  
P11/SCL1  
P12/SCL2  
P13/SDA1  
CLOCK(EEPROM)  
PRISON  
P00/PWMO  
P01/PWM1  
P02/PWM2  
AV1/AV2  
P14/SDA2  
DATA(EEPROM)  
MONITOR  
DG ON RELAY  
P16/AD8/TIM2  
S-IN  
TV/AV  
P03/PWM3/AD1  
P04/PWM4/AD2  
P16  
P50/H SYNC  
P51/V SYNC  
P52/B  
H SYNC  
V SYNC  
AFT IN  
X-RAY  
X-RAY2  
B
G
R
P06/INT2/AD4  
P07/INT2  
P53/G  
35  
P54/R  
34  
33  
ST-BY LED  
NC  
P20/SCLK/AD5  
P21/SOUT/AD6  
P22/SIN/AD7  
P23/TM3  
P55/OUT  
CLKCOUNT/P10  
P30/SDA3  
OUT  
CLK COUNT  
SDA  
32  
31  
KEY1  
BUS STOP  
P31/SCL3  
SCL  
30  
29  
28  
S-MUTE  
P24/TM2  
P25/INT3  
P15  
POWER  
FSC IN  
REMOCON IN  
FSCIN  
NC  
P26/XIN  
RESET  
27  
26  
25  
24  
23  
22  
RESET  
NC  
P27/XOUT  
CNVSS  
CVIN  
CCD CVBS  
CNVSS  
VHOLD  
CCD V-HOLD  
19  
20  
21  
GND  
X-IN  
HLF  
CCD HLF  
NC  
X-OUT  
VCC  
FILT  
VCC  
FILT  
VCC  
VSS  
25  
Ap p e n d ix  
IC DESCRIPTIO N  
III. PIN DESCRIPTION  
REMARKS  
NAME  
26  
IC DESCRIPTION  
IV. M61250(CROMA) Pin Configuration  
27  
Appendix  
TROUBLESHOOTING GUIDE  
1. NO POWER  
28  
#40 #42  
#63  
#2  
#64  
#7  
#62  
#59  
#3  
#31  
#30  
#26  
#27  
#22  
#58  
#41  
VCC  
5V  
#41  
C517  
#40  
#12  
#39  
DEF  
#14  
#15  
#16  
180V  
#33  
R412  
29  
#51  
#40 #42  
#63  
#2  
#64  
#7  
#50  
#48  
Z502  
4.5M Trap  
#4  
#31  
#30  
#26  
#27  
#22  
Check  
ATT FILTER Circut  
#43  
C603  
30  
Check  
T-SDA/SCL  
#31 #30  
#63  
#59  
#64  
#11  
#7  
#2  
#40  
#42  
#22  
SVC S5 Key input  
Vco adjust  
Vcc  
5V  
31  
#40  
#34  
#41  
#14  
#15  
#16  
Check  
the voltage (25V)  
#40  
Vertical IC Vcc (25V)  
#6  
#38  
#5  
#1  
#5  
32  
#31  
#30  
#26  
#27  
#37  
#38  
#34  
#35  
#36  
#33  
#23  
#22  
#21  
#24  
#22  
Vcc  
5V  
#15  
#22  
Check  
the voltage  
Vcc  
5V  
33  
DAEWOO ELECTRONICS CORP.  
686, AHYEON-DONG, MAPO-GU,  
SEOUL, KOREA.  
C.P.O. BOX 8003 SEOUL KOREA  
PRINTED DATE :  
SEP. 2005  

HP Hewlett Packard L1810 User Manual
HP Hewlett Packard Compaq CQ1859s User Manual
Elo TouchSystems 1925L Series User Manual
Elo TouchSystems 1225L User Manual
Cypress Perform CY8C21x23 User Manual
Asus M2NPV VM User Manual
Asus Computer Monitor VK193 User Manual
Apple Power Mac G5 User Manual
Ameriphone CL 40 User Manual
Acer WISTRON RB23WABAS User Manual