Daewoo DSC 3210EGB User Manual

DSC-3 2 1 0 EGB

CONTENT

REMOTE CONTROL & TV CONNECTIONS...............................................3

IMPORTANT SAFEGUARDS.......................................................................4

INSTALLATION............................................................................................4

START UP....................................................................................................5

CONNECTING EXTERNAL EQUIPMENT...................................................5

DAILY USE...................................................................................................6

MENUS DESCRIPTION...............................................................................8

TELETEXT..................................................................................................11

REMOTE CONTROL & TV CONNECTIONS

LOCAL CONTROL

Front

Side

B10

MAIN POWER button

REMOTE sensor

PROGRAM UP/DOWN buttons

VOLUME UP/DOWN buttons

TV / AV button

VIDEO INPUT socket

AUDIO INPUT (L + R) socket

PANEL S-VIDEO jack

HEADPHONE socket

STAND-BY indicator

B10

Rear

ANT

AV1

AV2

ANT IN

SCART 1 socket

SCART 2 socket

AERIAL jack

REMOTE CONTROL UNIT

TELETEXT mode

TV mode

POWER

A13

A14

A15

A17

A16

A18

A19

A20

A21

A22

A23

A24

A25

A26

A11

POWER

SOUND MUTE

A22

A33

A44

A55

A66

A77

SOUND MUTE

NUMBER 0..9

SLEEP

TV / AV

PROGRAM UP

PAGE UP

(CURSOR UP)

VOLUME DOWN

BRIGHT. DOWN

(CURSOR LEFT)

A88

CANCEL

A99

PAGE HOLD

A1100

A1111

A1122

A1133

A1144

A1155

A1166

A1177

A1188

A1199

SUBPAGE

A10

A11

A12

A13

A14

A15

A16

A17

A18

A19

A20

RED

SKIP

GREEN

MOVE

3D(SOUND EFFECT)

MODE

ZOOM

RECALL

NORMAL

INDEX

VOL./ BRIGHT. SELECTION

VOLUME UP

BRIGHT. UP

PAGE DOWN

TELETEXT > TV

HEIGHT

VOLUME UP

A2200

A10

A11

A12

(CURSOR RIGHT)

A21

PROGRAM DOWN

A2211

A2222

A2233

A2244

A2255

A2266

(CURSOR DOWN)

A22

A23

A24

A25

A26

TV > TELETEXT

REVEAL

CYAN

YELLOW

DELETE

IMPO RTAN T SAFEGU ARDS

WATER AND MOISTURE

Never install the set in the following places: In a wet basement, bathroom. Do not place any container with liquid on the set.

Do not expose the set to dripping or splashing water.

HEAT

Never place the set near heat sources.

Never put a naked flame, such as a candle, on the top of TV set.

VENTILATION

Do not cover the ventilations openings in the cabinet and never place the set in a confined space such as in a bookcase or built-in

cabinet unless proper ventilation is provided. Leave a minimum 10 cm gap all around the unit.

OBJECT ENTRY

Do not insert foreign objects, such as needles and coins, in the ventilation openings.

LIGHTNING STRIKING

You should disconnect the set from the mains and the aerial system during thunderstorms.

CLEANING

Unplug the set from the mains while cleaning.

AFTER MOVING THE SET

If the set is moved or turned, the MAIN POWER button must be switched off for at least 15 minutes

in order to take out colour patches on the screen.

IN STALLAT IO N

Batteries

ANT IN

Open remote control battery compartment

(at the rear) and insert two 1.5V type AAA

batteries. Warning: be careful to respect

battery polarities.

Insert the main plug into a 230V 50Hz AC

power socket.

Connect aerial to aerial jack (C3).

SWITCHING ON AND OFF

Power on the TV set using front panel MAIN POWER button (B1).

Select your preferred language from the LANGUAGE menu (see section

START UP on page 5).

Press the remote control MENU button (A19) to enter the main menu.

Select Install menu to tune and memorise TV programs.

START U P

LANGUAGE MENU

The very first time that you turn on the TV, the LANGUAGE menu will appear on the screen. Its purpose is to enable you to select the language that will be used for all the OSD (On

Screen Display) menus. The user must enter a choice of language before proceeding further.

The language entered at this stage can still be modified at any later time, by entering the FEATURES menu (see later section under MENU DESCRIPTION).

The discriptions used in the menu are those of the country code (e.g. GB = English, RUS = Russian etc).

LANGUAGE

FIN GB

RUS

Selection is made by use of the remote control CURSOR UP (A6)) / CURSOR

DOWN (A21) keys and CURSOR RIGHT (A20) / LEFT (A7) keys.

Once you are satisfied with your selection, push the OK button (A18) to confirm

your choice, after which the menu will disappear. The menu will never appear

again.

C O N N EC T IN G EX T ERN AL EQ U IPMEN T

The rear Scart 1 (C1), Scart 2 (C2) sockets and the side AV socket (B7) (B8) are three dedicated sockets to connect audio-video equipment.

Rear

ANT IN

REAR SCART 1 SOCKET (AV1)

This socket (C1) has video / audio inputs and outputs. It is

recommended to connect to this socket automatic AV switching

equipment such as pay-TV decoders, video games, DVD players and

most VCR’s.

In most cases, when connecting powered equipment to this socket, the

TV set switches automatically to AV mode. If not, then use the TV/AV

buttons (A5) or(B4) to select AV1.

VCR / DVD / Video Game / Pay-TV decoder

REAR SCART 2 SOCKET (AV2)

Important: If your video equipment does not have SCART socket(s),

or if you wish to use only the aerial (RF) connection (not recommended),

then you should make use of PR 00 on the TV set for best performance.

This socket (C2) has video / audio inputs and outputs.

Automatic AV switching equipment (for example most VCR’s) can be

connected to this socket.

In most cases, when connecting powered equipment to this socket, the

TV set switches automatically to AV mode. If not, then use the TV/AV

buttons (A5) or (B4) to select AV2.

HEADPHONE SOCKET

You can also receive an S-VHS signal with REAR SCART2 socket, by

selecting SVHS2 with the TV / AV buttons (A5) or (B4).

To hear TV sound with

headphones, insert a

3.5mm headphone plug

into the headphone socket

(B10). The speaker’s sound

will be automatically cut

off.

Side

VIDEO GAME

SIDE AV SOCKET (AV3)

SIDE S-VIDEO JACK

TV/AV SELECTION

The side S-VIDEO jack (B9) has

video inputs only. It is necessary to

connect the audio inputs to socket

(B8) in order to have audio and video.

To switch from TV to these inputs, use

the TV / AV buttons (A5) or (B4) and

select SVHS3.

Allows to switch between TV and

external modes.

The side AV socket (B7) -

(B8) has audio and video

By repeatedly pressing the remote

control TV / AV (A5) or the TV front

panel TV / AV (B4) button, the on-

screen display is changed as shown

AV1 > AV2 > SVHS2 > AV3 > SVHS3

> TV

inputs. To switch from TV

to these inputs, use the TV

/ AV buttons (A5) or (B4)

and select AV3.

CAMCORDER

DAILY USE

SWITCHING ON TV SET

1) If stand-by indicator (B5) is red, then the TV set is in

stand-by mode.

2) If stand-by indicator (B5) is not lit, then the TV set

is powered off.

3) If stand-by indicator (B5) is flashing red, and green

then the TV set is in child-lock mode.

You can switch on using the remote control POWER

button (A1), the NUMBER 0….9 buttons (A3), or

PROGRAM UP (A6) / DOWN (A21) buttons. The front

panel PROGRAM UP/DOWN buttons (B2) can also be

used.

You must press the TV set front panel MAIN

POWER button (B1). If a picture does not appear,

then the stand-by indicator will be red. In this

case, use the remote control as indicated in 1).

It is necessary to use the remote control POWER button

(A1), NUMBER 0….9 buttons (A3), or PROGRAM UP

(A6) / DOWN (A21) buttons. The front panel PROGRAM

UP/DOWN buttons (B2) will not function.

Once on, the stand-by indicator turns to green and the

picture appears on the screen.

Once on, the stand-by indicator turns to green and the

picture appears on the screen.

1) By pressing the remote control

2) Pressing the TV set front panel

MAIN POWER button (B1), you

can completely power off the TV

set. In this case, you must use the

same front panel POWER button

(B1) to switch on again (see

POWER button (A1) ,you can

switch off to stand-by mode (low

power consumption mode) which

also allows quick restart by remote

control (see above: SWITCHING

ON TV SET).

SWITCHING OFF

TV SET

above: SWITCHING ON TV SET).

Remark: If a broadcast signal is not present after 30 minutes, the TV set will be automatically turned to stand-by mode.

PROGRAM SELECTION (FROM 0 TO 99)

Direct selection

Up / Down selection

Use the remote control NUMBER 0….9

buttons (A3).

Use the remote control PROGRAM UP

(A6) / DOWN (A21) buttons or the TV set

front panel

For two digits program numbers, enter

the second digit within 2 seconds.

PROGRAM UP / DOWN buttons (B2).

SOUND CONTROL

Volume adjustment

Mono forcing, dual language

Use the remote control VOLUME UP

(A20) / DOWN (A7) buttons or the TV set

front panel VOLUME UP / DOWN

buttons (B3).

- If you are unable to get good sound

quality for a program due to poor

reception, you can force a change from

stereo to mono transmission by pressing

the remote control MODE button (A14).

Then the program status display

indicates "MONO" (in red).

- On the other hand, during a program

with dual language transmission, the

MODE button (A14) allows you to toggle

between the first and second language.

The program status display will indicate

"DUAL 1" or "DUAL 2" (plus NICAM

according to the received signal).

- To return to initial state, press again the

MODE button (A14).

Mute

Mute the sound by pressing the remote

control SOUND MUTE button (A2).

Then,

logo is displayed. The previous

sound setting is returned after pressing

the same button a second time.

Sound effects

A SPATIAL sound effect is available,

using the remote control 3D (A13) button.

The following display appears:

Spatial sound effect

SPATIAL

STEREO

11:11

Sound transmission mode

Clock

To return to initial sound effect, press

again the 3D (A13) button.

The following display appears:

No sound effect

Sound transmission mode

Clock

OFF

STEREO

11:11

As an option, the sound effects PANORAMA, and

VIRTUAL DOLBY are available with the same button.

For other adjustments (balance, equalizer, bass, treble), use the

Sound menu (page8).

GVision L15AX Series User Manual
GE DECT 00018673 User Manual
GE 2 9772 User Manual
EVGA GeForce GTX 460 FPB User Manual
Cypress EZ Host CY7C67300 User Manual
Cuisinart Convection Oven TOB 260 User Manual
A T International E5814B User Manual
Areca ARC 1110 User Manual
Apex Digital PF2020 User Manual
Agilent Technologies HDMP 3001 User Manual