Daewoo DF 8150P User Manual

HELP LINE ; 0870 100 2525  
With queries, please quote the page number,  
reference number and model number.  
DVD Recorder + VCR  
DVD Recorder + VCR  
DF-4100P/4150P/8100P/8150P  
User Manual  
P/N : 97P95600D0-1V  
Important Safeguards  
Important Safeguards  
Important Safeguards  
This set has been designed and manufactured to  
assure personal safety. Improper use can result in  
electric shock or fire hazard. The safeguards  
incorporated in this unit will protect you if you  
observe the following procedures for installation, use  
and servicing. This unit is fully transistorized and does  
not contain any parts that can be repaired by the user.  
ventilation to ensure reliable operation of the unit  
and to protect it from overheating. These  
openings must not be blocked or covered. These  
openings must not be blocked by placing the unit  
on a bed, sofa, rug, or other similar surface. This  
unit should never be placed near or over a  
radiator or heat radiator. This unit should not be  
placed in a built-in installation such as a  
bookcase or rack unless proper ventilation is  
provided or the manufacturer’s instructions have  
been adhered to.  
The lightning flash with arrowhead symbol,  
within an equilateral triangle, is intended to  
alert the user to the presence of uninsulated  
‘dangerous voltage‘ within the product’s  
enclosure that may be of sufficient magnitude  
to constitute a risk of electric shock.  
The exclamation point within an equilateral triangle  
is intended to alert the user to the presence of  
important operating and servicing instructions in  
the literature accompanying the appliance.  
CAUTION  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
CAUTION: TO REDUCE THE RISK OF ELECTRIC  
SHOCK, DO NOT REMOVE COVER (OR  
BACK). NO USER-SERVICEABLE PARTS  
INSIDE. REFER SERVICING TO  
1
2
3
4
5
READ INSTRUCTIONS  
All the safety and operating instructions should  
be read before the unit is operated.  
QUALIFIED SERVICE PERSONNEL.  
RETAIN INSTRUCTIONS  
The safety and operating instructions should be  
retained for future reference.  
10 POWER SOURCES  
This unit should be operated only from the type of  
power source indicated on the marking label. If  
you are not sure of the type of power supply to  
your home, consult your dealer or local power  
company. For units intended to operate from  
battery power, or other sources, refer to the  
operating instructions.  
WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN  
OR MOISTURE.  
HEED WARNINGS  
All warnings on the unit and in the operating  
instructions should be adhered to.  
CAUTION TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.  
FOLLOW INSTRUCTIONS  
All operating and use instructions should be  
followed.  
IMPORTANT FOR LASER PRODUCTS  
11 GROUNDING OR POLARIZATION  
LASER  
This Digital Video Disc Player employs a Laser System. To ensure proper use of this product please  
read this owner’s manual carefully and retain for future reference. Should the unit require  
maintenance, contact an authorized service location - see service procedure.  
Use of control adjustments or the performance of procedures other than those specified may result  
in hazardous radiation exposure.  
This unit is equipped with a polarized alternating  
-current line plug (a plug having one blade wider  
than the other). This plug will fit into the power  
outlet only one way.  
This is a safety feature. If you are unable to insert  
the plug fully into the outlet, try reversing the  
plug. If the plug still fails to fit, contact your  
electrician to replace your obsolete outlet.To  
prevent electric shock, do not use this polarized  
plug with an extension cord, receptacle, or other  
outlet unless the blades can be fully inserted  
without blade exposure. If you need an extension  
cord, use a polarized cord.  
CLEANING  
Unplug this unit from the wall outlet before  
cleaning. Do not use liquid cleaners or aerosol  
cleaners. Use a damp cloth for cleaning.  
To prevent direct exposure to the laser beam, do not try to open the enclosure. Visible laser  
radiation when open and interlocks defeated.  
6
7
8
ATTACHMENTS  
Do not use attachments unless recommended by  
the unit’s manufacturer as they may cause  
hazards.  
DO NOT STARE INTO THE BEAM.  
DANGER Visible laser radiation when open and interlock failed or defeated.  
Avoid direct exposure to beam.  
CLASS 1  
WATER AND MOISTURE  
Do not use this unit near water- for example, near  
a bath tub, wash bowl, kitchen sink or laundry  
tub, in a wet basement, or near a swimming pool.  
CAUTION Do not open the top cover. There are no user serviceable parts inside the  
LASER PRODUCT  
Unit; leave all servicing to qualified service personnel.  
12 POWER-CORD PROTECTION  
Power-supply cords should be routed so that they  
are not likely to be walked on or pinched by items  
placed upon or against them, paying particular  
attention to cords at plugs, convenience  
receptacles, and the point where they exit from  
the unit.  
ACCESSORIES  
Do not place this unit on an unstable cart, stand,  
tripod, bracket, or table. The unit may fall,  
causing serious injury to a child or adult as well  
as serious damage to the unit. Use this unit only  
with a cart, stand , tripod, bracket, or table  
recommended by the manufacturer.  
CAUTION Any changes or modification in construction of this device which are not expressly approved by  
the party responsible for compliance could void the user’s authority to operate the equipment.  
13 LIGHTNING  
Make sure the unit should be placed at least 8cm apart from the other home appliances or the obstacles to  
get sufficient ventilation.  
This unit shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall  
For added protection for this unit during a  
lightning storm, or when it is left unattended and  
unused for long periods of time, unplug it from  
the wall outlet and disconnect the antenna or  
cable system. This will prevent damage to the  
unit due to lightning and power line surges.  
PORTABLE CART WARNING  
(symbol provided by RETAC)  
8A A unit and cart combination  
should be moved with care.  
Quick stops, excessive force,  
and uneven surfaces may  
cause the product and cart  
combination to overturn.  
be placed on this unit.  
Switching it off does not disconnect it from the mains (stand-by). To disconnect it from the mains, you have to  
unplug it.  
14 DISC TRAY  
9
VENTILATION  
Slots and openings in the case are provided for  
Keep your fingers well clear of the disc as it is  
2
3
Important Safeguards  
Table of Contents  
Table of Contents  
closing. It may cause serious personal injury.  
uses have the same safety characteristics as the  
original parts. Use of replacements specified by  
the unit manufacturer can prevent fire, electric  
shock, or other hazards.  
Introduction  
Recording  
15 OVERLOADING  
Safety Instructions ____________________________1  
Important Safeguards _________________________2  
Table of Contents ______________________________5  
Overview______________________________________6  
Identification of Controls_______________________10  
Basic Recording________________________________43  
Recording from TV  
Do not overload wall outlets of extension cords  
as this can result in a risk of fire or electric shock.  
43  
44  
44  
44  
45  
45  
46  
46  
22 SAFETY CHECK  
One Touch Record (OTR)  
Checking the Recording Time  
To Pause the Recording  
One Touch Copy - DVD to VHS  
Copy Edit (DVD VCR)  
One Touch Copy - VHS to DVD  
Copy Edit (VCR DVD)  
16 OBJECT AND LIQUID ENTRY  
Upon completion of any service or repairs to this  
unit, ask the service technician to perform safety  
checks recommended by the manufacturer to  
determine that the unit is in safe operating  
condition.  
Never push objects of any kind into this unit  
through openings as they may touch dangerous  
voltage points or ‘short-out’ parts that could  
result in a fire or electric shock. Never spill liquid  
of any kind on the unit.  
23 WALL OR CEILING MOUNTING  
17 BURDEN  
The product should be mounted to a wall or  
ceiling only as recommended by the  
manufacturer.  
Connections  
Timer Recording _______________________________47  
Do not place a heavy object on or step on the  
product. The object may fall, causing serious  
personal injury and serious damage to the  
product.  
Timer Recording using Manual Set  
Connecting Antenna/Cable ____________________15  
Connecting a TV _______________________________16  
Connecting an Amplifier/Receiver _____________17  
Connecting Optional Equipment ______________18  
Connecting a Digital Camcorder ______________18  
Record Screen  
47  
24 HEAT  
Timer Recording using VideoPlus  
system  
Canceling a Timer Recording  
Stopping a Timer Recording in  
Progress  
Timer Recording Troubleshooting  
48  
49  
The product should be situated away from heat  
sources such as radiators, heat registers, stoves,  
or other products (including amplifiers) that  
produce heat.  
18 DISC  
Do not use a cracked, deformed or repaired disc.  
These discs are easily broken and may cause  
serious personal injury and product malfunction.  
49  
49  
19 SERVICING  
Recording from an External Input _____________50  
Do not attempt to service this unit yourself as  
opening or removing covers may expose you to  
dangerous voltage or other hazards. Refer all  
servicing to qualified service personnel.  
Setup  
Initial Installation ______________________________19  
Initial Setup____________________________________21  
Setup Menu Overview  
Menu Navigation  
INSTALLATION Settings  
RECORDING OPTIONS Settings  
LANGUAGE Settings  
PREFERENCES / Video Settings  
PREFERENCES / Audio Settings  
PREFERENCES / Parental Controls  
PREFERENCES / Auto Settings  
PREFERENCES / VCR  
Editing  
20 DAMAGE REQUIRING SERVICE  
21  
21  
21  
24  
25  
27  
28  
29  
31  
32  
32  
32  
Unplug this unit from the wall outlet and refer  
servicing to qualified service personnel under the  
following conditions.  
DISC Initialize__________________________________52  
Disc Menu _____________________________________52  
Title Menu _____________________________________55  
Editing _________________________________________57  
A. When the power-supply cord or plug is damaged.  
B. If liquid has been spilled, or objects have fallen  
into the unit.  
C. If the unit has been exposed to rain or water.  
D. If the unit does not operate normally by following  
the operating instructions. Adjust only those  
controls that are covered by the operating  
instructions. Improper adjustment of other  
controls may result in damage and will often  
require extensive work by a qualified technician  
to restore the unit to its normal operation.  
Reference  
System Information  
Restore Defaults  
Troubleshooting _______________________________59  
Technical Specifications________________________61  
On-Screen Display Overview __________________33  
E. If the unit has been dropped or the cabinet has  
been damaged.  
F. When the unit exhibits a distinct change in  
performance-this indicates a need for service.  
Playback  
DVD Playback _________________________________36  
VCR Playback _________________________________39  
Other Disc Playback __________________________41  
21 REPLACEMENT PARTS  
When replacement parts are required, have the  
service technician verify that the replacements he  
4
5
Overview  
Overview  
Overview  
DVD, DVD+R, DVD+RW?  
Playback only  
What is a DVD?  
DVD Video (Digital Versatile Disc)  
DVD (Digital Versatile Disc) is a storage medium that combines the convenience of the compact disc with the  
latest digital video technology. DVD video uses modern MPEG2 data compression technology that enables an  
entire feature film to be stored on a single five inch disc.  
DVD-R (DVD-Recordable): These discs can only be played back if the recording was made in ‘Video mode‘ and  
the recording was finalized.  
DVD-RW (DVD-Rerecordable): These discs can only be played back if the recording was made in ‘Video mode‘  
and the recording was finalized.  
How good is the resolution of DVD compared with VHS?  
Audio CD (Compact Disc Digital Audio)  
CD-R (CD recordable) Audio/ MP3 files  
CD-RW (CD rewritable) Audio/ MP3 files  
The razor-sharp digital images have more than 500 lines of resolution at 720 pixels per line. This is more than  
twice as high as VHS and even better than laser disc quality. DVD picture quality is easily comparable to the  
digital masters produced in recording studios.  
What is a DVD+RW?  
Not all recordable CDs may be played by your player.  
DVD+ReWritable uses ‘phase change‘ media, the same technology on which rewritable CDs are based. A high-  
performance laser is used to change the reflective properties of the recording layer; this process can be  
repeated more than a thousand times.  
Disc-related Terms  
What is a DVD+R?  
Title (DVD only)  
Unlike a DVD+RW disc, a DVD+R (write-once DVD) can only be written to once. If it is not finalized after a  
recording, further recordings can be added to it. Old recordings can be deleted but they can no longer be  
overwritten. The deleted recordings (titles) are marked 'deleted title'.  
The main film, accompanying feature content, or music album. Each title is assigned a title reference number  
enabling you to locate it easily.  
Chapter (DVD only)  
Before a DVD+R can be played in a DVD player, it must be finalized in the DVD Recorder+VCR. Once this  
process is complete, no further recordings can be added.  
Sections of a movie or a musical piece that are smaller than titles. A title is composed of one or several  
chapters. Each chapter is assigned a number to enable you to easily locate the chapter you want. Depending on  
the disc, chapters may not be labeled.  
What can I do with my DVD Recorder+VCR?  
Your DVD Recorder+VCR is a machine for recording and playing back digital video discs with ‘two-way‘  
compatibility with the universal DVD video standard. This means:  
Track (Audio CD only)  
Sections of a movie or a musical piece on an audio CD. Each track is assigned a number, enabling you to easily  
locate the track you want.  
• existing DVD video discs can be played on the recorder.  
• recordings made on your DVD Recorder+VCR can be played on other DVD video players and DVD-ROM  
drives.  
About DVD Recording  
Notes on Recording  
• The recording times shown are not exact because the DVD Recorder+VCR uses variable bit-rate video  
compression. This means that the exact recording time will depend on the material being recorded.  
• When recording a TV broadcast, if the reception is poor or the picture contains interference, the recording  
times may be shorter.  
Regional code  
If the region number on your DVD disc does not correspond to the region  
number of this player, the disc cannot be played.  
• Discs recorded at high speeds (equal to or greater than 2X) may not be recognized.  
• If you record still pictures or audio only, the recording time may be longer.  
• The displayed times for recording and time remaining may not always add up to the exact length of the  
disc.  
ALL  
2
• The available recording time may decrease if you heavily edit a disc.  
• When using a DVD+R disc, you can keep recording until the disc is full, or until you finalize the disc. Before  
you start a recording session, check the amount of recording time left on the disc.  
Which discs you can use  
The following discs can be used in your DVD Recorder+VCR:  
Recording TV Audio Channels  
Playback and recording  
DVD+RW (Digital Versatile Disc + ReWritable)  
The DVD Recorder+VCR can record one or two channel audio. For TV broadcasts, this usually means mono or  
stereo, but some programs are broadcast in bilingual audio channel. You can record either BIL I, BIL II or both.  
Restrictions on Video Recording  
DVD+R (Digital Versatile Disc + Write-Once)  
• You cannot record copy-protected video using this DVD Recorder+VCR. Copy-protected video includes DVD-  
6
7
Overview  
Overview  
Notes on Discs  
Video discs and some satellite broadcasts. If copy-protected material is encountered during a recording,  
recording will pause or stop automatically and an error message will be displayed on-screen.  
• Video that is ‘copy-once only’ can only be recorded using DVD+RW discs with CPRM.  
Handling Discs  
Do not touch the playback side of the disc. Hold the disc by the edges  
so that fingerprints will not get on the surface. Do not stick paper or  
tape on the disc.  
Copyright Notice  
• Audio and video recordings you make using the DVD Recorder+VCR are for your personal use only. You may  
not sell, lend, or rent them to other people.  
• This product incorporates copyright protection technology that is protected by method claims of certain  
U.S.patents and other intellectual property rights owned by Macrovision Corporation and other rights  
owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is  
intended for home and other limited viewing uses only unless otherwise authorized by Macrovision  
corporation. Reverse engineering or disassembly is prohibited.  
Storing Discs  
After playing, store the disc in its case.  
Do not expose the disc to direct sunlight or sources of heat, or leave it in a parked car exposed to direct  
sunlight, as there may be a considerable temperature increase inside the car.  
Cleaning Discs  
Fingerprints and dust on the disc can cause poor picture quality and  
sound distortion. Before playing, clean the disc with a clean cloth.  
Wipe the disc from the center outward.  
Do not use strong solvents such as alcohol, benzine, thinner,  
commercially available cleaners, or anti-static spray intended for older  
vinyl records.  
Precautions  
Yes  
No  
Handling the Unit  
When shipping the unit  
The original shipping carton and packing materials come in handy. For maximum protection, re-pack the  
unit as it was originally packaged at the factory.  
When setting up the unit  
About Symbols  
The picture and sound of a nearby TV, VCR, or radio may be distorted during playback. In this case, position  
the unit away from the TV, VCR, or radio, or turn off the unit after removing the disc.  
To keep the surface clean  
About the  
Symbol  
‘ may appear on the TV screen during operation. This icon means the function explained in this User's Guide  
Do not use volatile liquids, such as insecticide spray, near the unit. Do not leave rubber or plastic products  
in contact with the unit for a long period of time. They will leave marks on the surface.  
is not available on that specific disc.  
Cleaning the Unit  
To clean the cabinet  
Use a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth lightly moistened with a mild  
detergent solution. Do not use strong solvents such as alcohol, benzine, or thinner, as these might damage  
the surface of the unit.  
To obtain a clear picture  
The DVD Recorder+VCR is a high-tech, precision device. If the optical pick-up lens and disc drive parts are  
dirty or worn, the picture quality will be poor. Regular inspection and maintenance are recommended after  
every 1,000 hours of use. (This depends on the operating environment.) For details, please contact your  
nearest dealer.  
Remote Control Operation Range  
Point the remote control at the remote sensor and press the buttons.  
Distance: Within 23 ft (7 m) of the remote sensor.  
Angle: Within 30° in each direction of the remote sensor.  
Remote Control Battery Installation  
Detach the battery cover on the rear of the remote control, and insert two AAA  
batteries. Make sure the polarities (+ and -) are aligned correctly.  
Caution  
Do not mix old and new batteries. Never mix different types of batteries (standard,  
alkaline, etc.).  
8
9
Identification of Controls  
Identification of Controls  
Identification of Controls  
Front Panel  
Front Panel Display  
!
@
#
$
%
!
@
#
$ %  
^
&
*
(
) 1  
^ * ) 2  
( 1  
&
3
4 5  
6 7  
2
3
4
VCR: Advances the tape during Stop mode. Press  
during Play mode for fast forward picture search.  
REC SPEED  
SELECT DVD/VCR  
Toggles control between the DVD deck and the  
VCR deck.  
Front Panel Display  
Shows the current status of the DVD  
Recorder+VCR.  
!
STANDBY/ON  
! Indicates a VHS tape is inserted in the VCR deck.  
@ Circle : Indicates the VCR is recording.  
) Circle : Indicates a DVD+R(+RW) is recording.  
Clock : Indicates a DVD Timer recording is set.  
1 Indicates a disc is inserted in the DVD deck.  
2 Indicates the current Recording mode.  
Turns the DVD Recorder+VCR on and off.  
1
2
Lock/Unlock the front panel and Remote control  
by pressing and holding it over 5 seconds.  
Cassette Compartment (VCR deck)  
Insert a video cassette here.  
EJECT (VCR)  
Ejects the tape in the VCR deck.  
Disc Tray (DVD deck)  
Insert a disc here.  
OPEN/CLOSE (DVD)  
Opens or closes the disc tray.  
REW  
DVD: Skips to previous chapter.  
VCR: Rewinds the tape during Stop mode. Press  
during Play mode for fast reverse picture search.  
Clock : Indicates a VCR Timer Recording is set.  
@
#
$
%
^
# Indicates that a stereo broadcast is being  
received.  
3
Front Panel Display Message  
3
4
$ Indicates when the DVD Recorder+VCR is playing  
Indicates clock, total playing time, elapsed time,  
remaining time, title number, chapter/track  
number, channel, VCR counter, etc.  
or recording a tape with Hi-Fi sound.  
% Indicates the DVD Recorder+VCR is in TV mode  
(as set by the [TV/DVD] button).  
PR+/–  
4 DTS: Indicates a DVD is playing with a DTS  
^ Indicates the current Repeat mode.  
& Indicates when the DVD Recorder+VCR is locked.  
* Indicates when the DVD Recorder+VCR is  
outputting the video signal in Progressive Scan  
mode.  
soundtrack.  
Scans up or down through memorized channels.  
Also moves up and down in DVD navigation  
menus.  
REC  
Starts recording. Press repeatedly to set the  
recording time. Lights red when the DVD  
Recorder+VCR is recording.  
AVF (VIDEO, L-AUDIO-R)  
Connects to the audio/video output of an external  
source (VCR, Camcorder, etc.).  
DF-8100P/8150P only  
DV IN  
Connects to the DV output of a digital camcorder,  
video deck, or DVD+R/RW recorder.  
Dolby : Indicates a DVD is playing with a Dolby  
Digital soundtrack.  
5
(
Disc Type indicators  
Indicates the type of disc loaded.  
&
*
DISC MENU  
PLAY/PAUSE  
6
7
Starts playback of a disc or tape. Pauses playback  
or recording temporarily.  
STOP  
Stops playback.  
(
)
FF  
DVD: Skips to next chapter.  
10  
11  
Identification of Controls  
Identification of Controls  
Remote Control  
Turns the DVD Recorder+VCR on and off.  
Starts recording. Press repeatedly to set the recording time. For more  
details, Refer to One Touch Record (OTR) on page 44.  
- Opens and closes the disc tray in DVD mode.  
- Ejects the tape in the VCR deck in VCR mode.  
Copies from DVD to VCR (or from VCR to DVD).  
Selects DVD mode.  
Selects VCR mode.  
Selects Recording mode: - DVD : HQ (1hr), SP (2hrs), EP (4hrs) or SLP (6hrs).  
- VCR : SP or LP.  
Switches the DVD Recorder+VCR input to Tuner, AV1, AV2, AVF, or DV. (DV  
: DF-8100P/8150P only.)  
Switches between the DVD Recorder+VCR tuner and your TV tuner.  
Switches the view on your TV to the DVD Recorder+VCR tuner.  
Selects a subtitle language, if available.  
Selects a DVD camera angle, if available.  
- Selects numbered options in menus.  
- Selects TV channels.  
Enlarges the DVD video image.  
- Manually adjusts tracking.  
Repeats the current chapter, track, title or the entire disc.  
Repeats playback between two points (A and B).  
Searches for a specific title or a chapter.  
Resets the tape counter in VCR mode.  
Press and hold for 3 seconds to switch between Progressive Scan and  
Interlace Scan mode.  
Accesses DVD disc menus.  
Selects an audio language (DVD), audio channel (CD) or audio type (TV).  
Displays or exits the Setup menu.  
Displays a disc’s Title menu, if available.  
Displays the Timer Recording menu.  
Edits chapters or splits titles of DVD+R(+RW) discs.  
Displays information about the currently loaded disc, VHS tape, or TV  
channel.  
Progressive Scan Mode  
- œ √…† : Selects menu options.  
- PR +/– : Selects channels.  
If your TV supports Progressive Scan, you can view high quality video by setting the  
DVD Recorder+VCR to Progressive Scan mode. If your TV does not support  
Progressive Scan, do NOT change to Progressive Scan mode.  
If you do so accidentally, press and hold the [P.SCAN] button for 3 seconds to restore  
normal viewing.  
Confirms menu selections.  
Skips to the next or previous chapter/track.  
- DVD: Searches backward/forward.  
- VCR: Rewinds/advances during Stop mode. Press during Play mode for  
fast reverse/forward picture search.  
When video output mode is changed from RGB to Interlace or Progressive (Scart 1)  
must not be correct color for Component video.  
As component outputs have their own Jacks on the back side, change the TV input  
into Component input, after connecting the component cables from the DVD  
Recorder+VCR to TV.  
Changing from Interlace or Progressive to RGB, should be the opposite of above.  
Increases or decreases the slow motion speed when playing a DVD or VHS  
tape.  
- Starts playback.  
- Pauses playback or recording temporarily. Press again to exit Pause mode.  
Stops playback or recording.  
12  
13  
Identification of Controls  
Connections  
Connections  
There are a variety of ways to connect the DVD Recorder+VCR to your TV and other equipment. Use only one of  
Rear panel  
the connections described below. Whichever TV connection you use will work with all input sources.  
Please refer to the manuals for your TV, VCR, stereo system, or other devices as necessary to make the best  
connections.  
!
@#  
$
^
For better sound reproduction, connect the DVD Recorder+VCR’s AUDIO OUT jacks to the audio in jacks of your  
amplifier, receiver, stereo, or audio/video equipment. See ‘Connecting an Amplifier/Receiver‘ on page 17.  
Caution  
Make sure the DVD Recorder+VCR is connected directly to the TV, and the TV is set to the correct video input.  
Do not connect the DVD Recorder+VCR’s AUDIO OUT jack to the phono in jack (record deck) of your audio system.  
Do not connect the DVD Recorder+VCR via your VCR. The DVD image could be distorted by the copy protection  
system.  
(
*
%
&
Connecting Antenna/Cable  
!
@
AC Power Cord  
%
Scart socket 1  
Connection of a TV set. Composite-output and  
RGB-output  
RF IN (FROM ANT.)  
Connect to your antenna or cable TV outlet.  
RF OUT (TO TV)  
Connect to a TV with an RF coaxial input.  
COAXIAL (Digital Audio Out)  
Connect to an amplifier with a coaxial digital  
audio input.  
S-VIDEO OUT  
Connect to a TV with an S-Video Input.  
1
Disconnect the antenna/cable from the rear of your  
TV.  
Plug into a power outlet.  
Antenna  
Antenna  
AUDIO OUT (L, R)  
Connect to a TV or other equipment with audio  
inputs.  
COMPONENT/PROGRESSIVE VIDEO OUT (Y Pb Pr)  
Connect to a TV with Component Video (Y Pb Pr)  
inputs.  
Scart socket 2  
Connection of an additional device (satellite  
receiver, set-top box, video recorder, camcorder,  
etc.)  
Cable TV  
Wall Jack  
^
&
*
2
Connect this cable to the jack marked RF IN (FROM  
ANT.) on the rear panel of the DVD Recorder+VCR.  
Flat Wire  
(300ohm)  
#
$
300/75ohm Adapter  
(Not supplied)  
OR  
OR  
(
Caution  
Rear of DVD Recorder+VCR  
Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage  
to the DVD Recorder+VCR.  
If your cable wire is connected to your TV without a  
converter or descrambler box, unscrew the wire from your TV and attach it to the RF IN (FROM ANT.) jack on the  
rear panel of the DVD Recorder+VCR.  
Use the supplied RF cable to connect between the DVD Recorder+VCR’s OUT (TO TV) jack and the antenna input  
jack on your TV. With this connection, you can receive all midband, superband, and hyperband channels (all  
cable channels).  
14  
15  
Connections  
Connections  
Connecting a TV  
Connecting an Amplifier/Receiver  
Choose one of the following TV connections, depending on the capabilities of your equipment.  
Connecting to an amplifier equipped with two channel analog stereo or Dolby Pro Logic ll/Pro Logic  
Connect the Left and Right AUDIO OUT jacks on the DVD Recorder+VCR to the left and right audio in jacks on  
your amplifier, receiver, or stereo system, using the supplied audio cables (A).  
All video signals are available from all video outputs. That means that whichever TV connection you use, it will  
work with all input sources, including VHS out of the Component/Progressive Video Output.  
Connecting to an amplifier equipped with two channel digital stereo (PCM) or to an Audio/Video receiver equipped  
with a multi-channel decoder (Dolby Digital™, MPEG 2, or DTS)  
RF Connection  
Connect the RF OUT (TO TV) jack on the DVD  
Recorder+VCR to the antenna in jack on your TV using  
the supplied 75-ohm RF cable (R).  
Rear of TV  
1
Connect the DVD Recorder+VCR’s DIGITAL AUDIO OUT jack (Coaxial) to the corresponding in jack on your  
amplifier. Use an optional digital coaxial audio cable. (X)  
S-VIDEO  
INPUT  
ANTENNA  
INPUT  
COMPONENT/PROGRESSIVE VIDEO INPUT  
Y
Pr  
Pb  
2
You will need to activate the DVD Recorder+VCR’s digital output; see ‘Audio’ Settings on page 28.  
Scart Connection  
Digital Multi-Channel Sound?  
A digital multi-channel connection provides the best sound quality. For this you need a multi-channel  
audio/video receiver that supports one or more of the audio formats supported by your DVD Recorder+VCR  
(MPEG 2, Dolby Digital, and DTS). Check the receiver manual and the logos on the front of the receiver.  
S
C
V
R
1
Plug a scart cable into the scart socket EURO  
AV1 at the back of the DVD Recorder+VCR and  
the corresponding scart socket at the back of the  
TV set. (V)  
Due to the DTS Licensing agreement, the digital output will be in DTS digital out when DTS audio stream is  
selected.  
2
Plug a scart cable into the blue scart socket  
EURO AV2/DECODER at the back of the DVD  
Recorder+VCR and the corresponding scart  
socket at the back of the Decoder.  
If the audio format of the digital output does not match the capabilities of your receiver, the receiver will produce  
a strong, distorted sound or no sound at all.  
5.1 channel digital surround sound via the digital connection can only be obtained if your receiver is equipped with  
a digital multi-channel decoder.  
Rear of DVD Recorder+VCR  
S-Video Connection  
To see the audio format of the current DVD on the on-screen display, press [AUDIO].  
1
Connect the S-VIDEO OUT jack on the DVD Recorder+VCR to the S-Video in jack on your TV using an S-  
Video cable (S).  
The DVD Recorder+VCR does not perform internal (2- channel) decoding of DTS sound tracks. To enjoy DTS multi-  
channel surround, you must connect the DVD Recorder+VCR to a DTS compatible receiver via one of the DVD  
Recorder+VCR’s digital audio outputs.  
2
Connect the Left and Right AUDIO OUT jacks from the DVD Recorder+VCR to the left/right audio in jacks on  
your TV using the audio cables.  
Rear of DVD Recorder+VCR  
Component Video Connection  
1
Connect the COMPONENT/PROGRESSIVE VIDEO OUT jacks on the DVD Recorder+VCR to the corresponding  
in jacks on your TV using a Y Pb Pr cable (C) if the component (Y, Pb, Pr) is available on your TV.  
2
Connect the Left and Right AUDIO OUT jacks from the DVD Recorder+VCR to the left/right audio in jacks on  
your TV using the audio cables.  
Progressive Scan Connection  
• If your television is a high-definition or ‘digital ready‘ television, you may take advantage of the DVD  
Recorder+VCR’s Progressive Scan output for the highest video resolution possible.  
A
X
• If your TV does not accept the Progressive Scan format, the picture will appear scrambled.  
1
Connect the COMPONENT/PROGRESSIVE VIDEO OUT jacks on the DVD Recorder+VCR to the corresponding  
in jacks on your TV using an optional Y Pb Pr cable (C).  
L
R
COAXIAL  
AUDIO INPUT  
DIGITAL INPUT  
2
Connect the Left and Right AUDIO OUT jacks from the DVD Recorder+VCR to the left/right audio in jacks on  
your TV using the audio cables.  
Amplifier (Receiver)  
Be sure to set the DVD Recorder+VCR to Progressive Scan mode by pressing and holding [P.SCAN] for 3 seconds  
(or changing the ‘Video Output’ in the Setup Menu; see page 27).  
Progressive Scan does not work with the RF, Audio/Video or S-Video connections.  
16  
17  
Connections  
Initial Installation  
Initial Installation  
Connecting Optional Equipment  
Initial Installation  
To receive audio/video signals from other equipment, connect  
the AVF jacks on the DVD Recorder+VCR to the audio/video out  
jacks on your external component, using optional audio/video  
cables.  
After successfully connecting your DVD Recorder+VCR to your TV and other  
devices, this chapter will show you how to complete the initial installation.  
Jack Panel of Accessory Component  
(VCR, Camcorder, etc.)  
Installation  
You must follow the initial installation process to set the time, date,  
channels, and language preferences for the DVD Recorder+VCR.  
Welcome.  
Press [Enter] to begin auto channel search.  
Ensure antenna is connected.  
1
2
A ‘Welcome‘ message is displayed on the screen. Make sure the RF cable  
from your antenna or cable TV jack is connected. Press [ENTER] to begin  
initial installation.  
Instructions  
Setup-Exit  
Select the desired language for the on-screen menu using [/]. Press  
[ENTER] to confirm.  
Installation  
Please select your language to begin auto  
install procedure:  
English  
Spanish  
French  
Czech  
Danish  
German  
Dutch  
Front of DVD Recorder+VCR  
Instructions  
Enter-Confirm Setup-Exit Move …†  
3
4
Select the desired country using [/]. Press [ENTER] to confirm.  
Installation  
Please select your country of use:  
Australia  
Belgium  
Denmark  
Finland  
DF-8100P/8150P only  
Connecting a Digital Camcorder  
France  
Using the front panel DV IN jack, it is possible to connect a  
DV digital camcorder, video deck or DVD+R/RW recorder  
and digitally transfer DV tapes or DVD+R/RW discs to  
DVD+R/RW.  
DV Digital Camcorder  
Instructions  
Enter-Confirm Setup-Exit Move …†  
DV  
IN/OUT  
Select the desired disc menu language using [/]. Press [ENTER] to  
confirm.  
Use a DV cable (not supplied) to connect the DV In/Out jack  
of your DV camcorder/video deck to the front panel DV IN  
jack of the DVD Recorder+VCR.  
Installation  
Please select disc menu language:  
Default  
English  
Spanish  
French  
Czech  
Danish  
German  
This jack is for connection to DV equipment only. It is not  
compatible with digital satellite tuners or D-VHS video  
decks.  
Instructions  
Enter-Confirm Setup-Exit Move …†  
D
5
Select the desired disc playback audio language using [/]. Press  
[ENTER] to confirm.  
Installation  
Please select disc audio language:  
Default  
English  
Spanish  
French  
Czech  
Danish  
German  
Front of DVD Recorder+VCR  
Instructions  
Enter-Confirm Setup-Exit Move …†  
18  
19  
Initial Installation  
Initial Setup  
Initial Setup  
Setup Menu Overview  
The DVD Recorder+VCR Setup menu includes six categories, including: Installation, Recording Options,  
Languages, Preferences, System Info, and Restore Defaults. Press [SETUP] and [œ/] on the remote control to  
view the first and second levels of the Setup menu.  
6
7
Select the desired disc playback subtitle language using [/]. Press  
Installation  
[ENTER] to confirm.  
Please select disc subtitle language:  
Default  
English  
Spanish  
French  
Czech  
Danish  
German  
Menu Navigation  
Instructions  
Enter-Confirm Setup-Exit Move …†  
1
2
3
4
5
Press [SETUP]. The Setup menu appears.  
Use [œ/] to select the desired category.  
The DVD Recorder+VCR detects channels automatically and stores them  
in memory.  
While the desired category is selected, press [/] to move to the second level.  
Press [ENTER] to move to the third level.  
Installation  
Searching for available TV stations:  
Use [/] to select the desired setting, then press [ENTER] to confirm your selection.  
Some items require additional steps. Press [SETUP] at any time to return to the previous menu.  
Press [SETUP] to exit the Setup menu.  
2 channels found  
Please wait...  
6
Instructions  
Setup-Exit  
INSTALLATION Settings  
Manual Set  
8
9
After finishing Auto Channel Search, set the clock.  
Set Clock  
Use [œ/] to move left/right and use [/] to change the settings.  
Installation  
Manual Set  
Auto Set  
Set Clock  
Adjust Channels  
Please set the clock:  
To complete the set-up of your DVD Recorder+VCR when the auto set has  
not stored all of the channels or when you wish to store a new channel.  
10 After setting the clock, press [ENTER] to confirm. If you cancel the process  
Time : 13 : 00  
during Initial Installation, you should repeat this procedure.  
1
2
3
4
Press [SETUP]. The Setup menu appears.  
Date : Jan / 02 / 2010 (SAT)  
Use [œ/] to select ‘Installation‘.  
Instructions  
Enter-Confirm Setup-Exit Move …†  
While ‘Installation‘ is selected, press [] to select ‘Manual Set‘.  
Press [ENTER]. The ‘Manual Setup’ menu appears.  
Instructions  
Enter-Confirm Setup-Exit  
Move …†  
5
6
Use [/] to select ‘Standard‘. Press [ENTER] to move to the second  
Manual Setup  
Standard  
Reception  
Auto Search  
Fine Tune  
Decoder  
level.  
PA-
Select The  
A
standard.  
Use [/] to select the desired ‘Standard’ (PAL-BG, PAL-II, PAL-DK, or  
SECAM-L), then press [ENTER].  
C
PAL-BG  
PAL-II  
Store  
Program Name  
Instructions  
P
SECAM-L  
PAL-DK  
Enter-Confirm Setup-Exit Move …†  
7
8
Use [/] to select ‘Reception‘. Press [ENTER] to move to the second  
Manual Setup  
Standard  
Reception  
Auto Search  
Fine Tune  
Decoder  
Store  
Program Name  
Instructions  
level.  
PAL-BG  
Aerial  
Select The  
Use [/] to select the desired broadcast system (Aerial or Cable),  
then press [ENTER].  
C
Reception.  
Aerial  
Aerial: If you are using a standard antenna to receive channels.  
P
Cable  
P-01  
Cable: If you are using basic cable to receive channels.  
Enter-Confirm Setup-Exit Move …†  
20  
21  
Initial Setup  
Initial Setup  
Manual Setup  
Standard  
Reception  
Auto Search  
Fine Tune  
Decoder  
Store  
Program Name  
Instructions  
9
Use [/] to select ‘Auto Search‘.  
Auto Set  
PAL-BG  
Aerial  
CH02  
The DVD Recorder+VCR has a frequency synthesized tuner capable of receiving  
up to 119 channels. These include VHF channels 2-20, 74-80, UHF channels 21-  
69 and CATV channels 1-41.  
10 Search the real channel number by pressing [œ/].  
Installation  
Manual Set  
Auto Set  
Set Clock  
Adjust Channels  
Off  
PR01  
P-01  
Preparation:  
Connect the DVD Recorder+VCR to the desired type of antenna or cable TV  
system, as shown in ‘Connecting Antenna/Cable‘ on page 15.  
Enter-Confirm Setup-Exit Move …†  
1
2
3
Follow steps 1-2 as shown under ‘Manual Set’.  
While ‘Installation‘ is selected, press [/] to select ‘Auto Set‘.  
Press [ENTER] to begin the channel search.  
Instructions  
11 Select ‘Fine Tune’. You can adjust the fine tuning.  
Manual Setup  
Standard  
Reception  
Auto Search  
Fine Tune  
Decoder  
Store  
Program Name  
Instructions  
Enter-Confirm Setup-Exit  
PAL-BG  
Aerial  
CH02  
Move …†  
The tuner will automatically search for all available channels in your area  
and place them in the tuner’s memory.  
Installation  
Off  
PR01  
P-01  
Searching for available TV stations:  
After Auto Set is complete, follow the instructions above to make sure that  
Tuning Band is set correctly.  
Enter-Confirm Setup-Exit Move …†  
5 channels found  
Please wait...  
12 Use [/] to select ‘Decoder‘. Press [ENTER] to move to the second  
Manual Setup  
Standard  
Reception  
Auto Search  
Fine Tune  
Decoder  
Store  
Program Name  
Instructions  
level.  
Instructions  
Setup-Exit  
PAL-BG  
Aerial  
CH02  
13 When the program is encoded (and you have a decoder connected to  
socket EURO AV2), press [/] to select ‘On’ and press [ENTER] to  
confirm.  
Set Clock  
1
2
Select Decoder  
State  
Off  
Follow steps 1-2 as shown under ‘Manual Set’.  
Enter-Confirm Setup-
On  
Use [/] to select ‘Set Clock‘.  
Installation  
Manual Set  
Auto Set  
Set Clock  
Adjust Channels  
14 Use [/] to select ‘Store‘. Press [ENTER] to move to the second  
Manual Setup  
Standard  
Reception  
Auto Search  
Fine Tune  
Decoder  
Store  
Program Name  
Instructions  
level.  
PAL-BG  
Aerial  
CH02  
15 Use [/] to select program number to store and press [ENTER] to  
confirm.  
Instructions  
Enter-Confirm Setup-Exit  
Move …†  
Off  
PR01  
Select Channel  
To Store  
PR99  
3
4
Press [ENTER]. The ‘Set Clock’ menu appears.  
Enter-Confirm Setup-
Set Clock  
Enter the date and time.  
16 Use [/] to select ‘Program Name‘. Press [] to move to the second  
level. If your DVD Recorder+VCR is showing no station name or is  
showing a station name incorrectly, you can correct this.  
Please set the clock:  
Time : 12 : 00  
Manual Setup  
Standard  
Reception  
Auto Search  
Fine Tune  
Decoder  
Store  
Program Name  
Instructions  
œ /(left/right): Moves the cursor to the previous or next column.  
/(up/down): Changes the setting at the current cursor position.  
PAL-BG  
Aerial  
CH02  
17 Either select the name from the stored list or you create the station  
name and enter a 4-digit name. Change the letters with the [/],  
move the next letter with the [œ/].  
Date : 02 \ Jan \ 2010 (Sat)  
5
Press [ENTER] to confirm your setting, then press [SETUP] to exit the Setup  
menu.  
Off  
Instructions  
Enter-Confirm Setup-Exit Move …†  
PR01  
Edit Channel  
Name  
P
0
1
Enter-Confirm Setup-
22  
23  
Initial Setup  
Initial Setup  
Adjust Channels  
VCR Record Quality  
You can set the default VCR recording quality to SP (Standard Play) or LP  
(Long Play). SP is higher quality, but LP provides 2 times the recording  
time; e.g., a 2 hour tape will record for 4 hours in LP mode.  
1
2
3
4
Follow steps 1-2 as shown under ‘Manual Set’.  
Recording Options  
Use [/] to select ‘Adjust Channels‘.  
Installation  
Manual Set  
Auto Set  
Set Clock  
Adjust Channels  
DVD Record Quality  
VCR Record Quality  
Auto Chapter  
HQ  
Follow the same procedure as the ‘DVD Record Quality’.  
Select VCR  
Press [ENTER]. The Adjust Channels menu appears.  
Quality  
Use [/] to select the PR number you want to adjust. Then press  
[ENTER].  
LP  
Instructions  
Enter-Confirm Setup-Exit  
SP  
Delete  
Instructions  
Move …†  
After tuning TV stations into your DVD Recorder +VCR, you may wish to delete a  
station.  
Enter-Confirm Setup-Exit  
Move …†  
Auto Chapter  
1
Use [/] to select 'Delete' and press [ENTER].  
During recording, chapter markers are added automatically at fixed  
intervals. You can set this interval to 5 minutes, 10 minutes or 15  
minutes. To turn off automatic chapter marking, select ‘Off‘.  
Recording Options  
Adjust Channels  
PR-01  
PR-02  
PR-03  
PR-04  
PR-05  
Edit  
DVD Record Quality  
VCR Record Quality  
Auto Chapter  
HQ  
After tuning TV stations into your DVD Recorder +VCR, you may wish to put a  
name into any channel you want to.  
Select Channel  
Select Auto  
Options  
Delete  
Edit  
Follow the same procedure as the ‘DVD Record Quality’.  
Chapter  
Off  
1
2
3
Use [/] to select 'Edit' and press [ENTER].  
You can put a name by pressing [/] and [œ /].  
Press [ENTER] to confirm.  
5min  
10min  
15min  
Instructions  
Enter-Confirm Setup-Exit  
Move …†  
PR-06  
Align  
Instructions  
Enter-Confirm Setup-Exit Move …†  
Align  
After tuning TV stations into your DVD Recorder +VCR, you may wish to change  
the order of PR's you have in your set, as your preference.  
LANGUAGE Settings  
OSD Language  
1
2
3
Use [/] to select 'Align' and press [ENTER].  
Press [/] to select the PR number you want to move to.  
Press [ENTER]. The selected PR Will be moved to the new PR number.  
Select a language for the DVD Recorder+VCR Setup menu and on-  
screen displays.  
1
2
3
4
5
6
Press [SETUP]. The Setup menu appears.  
Use [œ] and [] to select ‘Language‘.  
Language  
RECORDING OPTIONS Settings  
DVD Record Quality  
While ‘Language‘ is selected, press [] to select ‘OSD Language‘.  
Press [ENTER] to move to the second level.  
Use [/] to select the desired language.  
OSD Language  
En
Select OSD  
Menu Language  
Subtitle Language  
Audio Language  
Language  
English  
You can set the default DVD recording quality to: HQ (High Quality - 1  
hr/disc), SP (Standard Play - 2 hrs/disc), EP (Extended Play - 4 hrs/disc), or  
SLP (Super Long Play - 6 hrs/disc).  
Spanish  
French  
Czech  
Press [ENTER] to confirm your selection, then press [SETUP] to exit  
the menu.  
Recording Options  
Instructions  
Enter-Confirm Setup-Exit  
1
2
3
Press [SETUP]. The Setup menu appears.  
DVD Record Quality  
VCR Record Quality  
Auto Chapter  
HQ  
Move …†  
Select Record  
Quality  
Use [œ/] to select ‘Recording Options‘.  
SLP  
While ‘Recording Options‘ is selected, press [] to select ‘DVD  
Record Quality‘.  
EP  
Instructions  
SP  
HQ  
Enter-Confirm Setup-Exit  
Move …†  
4
5
Press [ENTER] to move to the second level.  
Use [/] to to select the desired Record Quality (HQ, SP, EP, or  
SLP).  
6
Press [ENTER] to confirm your selection, then press [SETUP] to exit the menu.  
24  
25  
Initial Setup  
Initial Setup  
PREFERENCES / Video Settings  
Menu/Subtitle/Audio Language  
1
Press [SETUP].  
Select your preferred language for Disc Menus, Subtitles, and Audio  
soundtracks.  
Language  
Preferences  
Video  
Audio  
Parental Controls  
Auto Settings  
VCR  
2
3
3
Use [œ/] to select ‘Preferences‘.  
OSD Language  
English  
Follow the same procedure as the OSD Language.  
Select Menu  
While ‘Preferences‘ is selected, press [] to select ‘Video‘.  
Press [ENTER]. The ‘Video‘ submenu is displayed.  
Menu Language  
Subtitle Language  
Audio Language  
Language  
Default : The disc’s default language is selected.  
Default  
English  
Spanish  
French  
Instructions  
Enter-Confirm Setup-Exit  
Move …†  
Instructions  
Enter-Confirm Setup-Exit  
Move …†  
Language  
OSD Language  
English  
Select Subtitle  
Menu Language  
Subtitle Language  
Audio Language  
Language  
TV Aspect Ratio  
1
Use [/] to select ‘TV Aspect‘ while the ‘Video‘ submenu is  
displayed.  
Default  
Video  
English  
Spanish  
French  
Instructions  
TV Aspect  
Video Output  
A
Select Picture  
Inte
Format  
Enter-Confirm Setup-Exit  
2
3
4
5
Press [ENTER] or [] to go to the second level.  
Use [/] to select the desired ‘TV Aspect’.  
Press [ENTER] to confirm your selection.  
Press [SETUP] to exit the menu.  
Move …†  
4:3 LB  
4:3 PS  
16:9  
Language  
Instructions  
OSD Language  
English  
Auto  
Select Audio  
Enter-Confirm Setup-Exit Move …†  
Menu Language  
Subtitle Language  
Audio Language  
Language  
4:3 LB : Select when a standard 4:3 TV is connected. Displays theatrical  
Default  
images with masking bars above and below the picture.  
English  
Spanish  
French  
4:3 PS : Select when a standard 4:3 TV is connected. Displays pictures cropped to fill your TV screen. Both  
Instructions  
Enter-Confirm Setup-Exit  
Move …†  
sides of the picture are cut off.  
16:9 : Select when a 16:9 wide screen TV is connected.  
Auto : Convert to the appropriate aspect ratio automatically.  
Video Output  
Progressive Scan Video provides the highest picture quality with reduced  
flickering.  
Video  
TV Aspect  
Video Output  
Auto  
RGB : If you connect the DVD Recorder+VCR to a analog television using  
the SCART jacks, set Video Output to ‘RGB’.  
Inter
Select Video  
Output  
Interlace or Progressive : If you connect the DVD Recorder+VCR to a  
digital television (DTV) or Monitor using the COMPONENT jacks, set  
Video Output to ‘Interlace’ or ‘Progressive’.  
Interlace  
Progressive  
RGB  
Instructions  
Enter-Confirm Setup-Exit Move …†  
Follow the same procedure as ‘TV Aspect Ratio’ to change the ‘Video  
Output’.  
Caution  
Once the Progressive Scan setting is entered, an image will only be visible on a Progressive Scan compatible TV  
or monitor. Press and hold [P.SCAN] for 3 seconds to return to Interlace Scan mode.  
26  
27  
Initial Setup  
Initial Setup  
PREFERENCES / Audio Settings  
Follow the same procedure as ‘Video’ Settings to select ‘Audio’ Settings.  
PREFERENCES / Parental Controls  
Set Parental Level  
The Parental Controls feature allows you to prevent DVDs from being played  
based on their ratings or to have certain discs played with alternative scenes.  
You can set the parental level from ‘ADULT’ to ‘KIDS’.  
Preferences  
Video  
Audio  
Parental Controls  
Auto Settings  
VCR  
Preferences  
Video  
Audio  
Parental Controls  
Auto Settings  
VCR  
1
2
3
Press [SETUP].  
Digital Output  
Use [œ/] to select ‘Preferences‘.  
1
Use [/] to select ‘Digital Output‘ while the ‘Audio’ submenu is  
displayed.  
Instructions  
Enter-Confirm Setup-Exit  
Move …†  
While ‘Preferences‘ is selected, press [] to select ‘Parental Controls‘. And  
press [ENTER].  
Instructions  
Enter-Confirm Setup-Exit  
Move …†  
2
3
4
5
Press [ENTER] or [] to go to the second level.  
Use [/] to select the desired digital output type.  
Press [ENTER] to confirm your selection.  
Press [SETUP] to exit the menu.  
Audio  
Parental Control  
4
Use [/] to select ‘Set Parental Level’ and press [ENTER]. The Password  
Input dialog will appear. Enter a 4-digit password using the [0-9] buttons. If  
this is the first time you have entered a password, you will be prompted to  
enter the password again to confirm it.  
Digital Output  
Dynamic Range  
Virtual Surround  
Select Digital  
Set Parental Level  
Change Password  
Set Parental Country Code  
Off  
Output  
Off  
Off  
Bitstream  
LPCM  
No signal will be output from the Digital Audio Out jacks.  
The initial password is ‘0000‘. You must enter this password before you can  
change the Parental Level.  
LPCM  
Instructions  
Enter-Confirm Setup-Exit Move …†  
Instructions  
Enter-Confirm Setup-Exit Move …†  
Select when connected to a 2 channel digital stereo amplifier. The DVD  
Recorder+VCR's digital audio signal will be output in the PCM 2ch format  
when you play a DVD (or VHS tape) recorded with a Dolby Digital (only for DVD) or MPEG soundtrack. If the DVD  
is recorded with a DTS sound track then no sound will be heard.  
5
After setting the password, press [ENTER] while 'Set Parental Level' is  
displayed.  
Change Password  
Current Code  
Enter New Code  
Confirm Code  
_ _ _ _  
_ _ _ _  
_ _ _ _  
Bitstream  
Select when connected to a Dolby Digital or DTS decoder (or an amplifier or other equipment with a Dolby  
Digital or DTS decoder).  
Instructions  
Setup-Exit  
Dynamic Range  
6
7
Enter your new password.  
While watching DVD movies, you may wish to compress the dynamic  
Password  
Audio  
range of the audio output (the difference between the loudest and  
Enter Password  
* * _ _  
Set the new password to something other than '0000'.  
quietest passages). This allows you to listen to a movie at a lower  
volume without losing clarity of sound. Set ‘Dynamic Range‘ to Low or  
High for this effect.  
Digital Output  
Dynamic Range  
Virtual Surround  
Off  
Off  
Instructions  
Setup-Exit  
Select Dynamic  
Range  
Follow the same procedure as ‘Digital Output‘ to set the ‘Dynamic  
Range’.  
Off  
Parental Control  
Low  
High  
Use [/] to select the desired parental level and press [ENTER] to  
confirm.  
Instructions  
Enter-Confirm Setup-Exit Mo
Set Parental Level  
Change Password  
Set Parental Country
Select the  
Off : If you select Unlock, the Lock feature is not active. All discs will play in  
parental level  
Off  
Virtual Surround  
You can enjoy a simulated 3D effect from two speakers by setting Virtual  
Surround to On.  
Follow the same procedure as ‘Digital Output‘ to set the ‘Virtual  
Surround’ option.  
full.  
ADULT  
NC-17  
ADULT to KIDS: Some discs contain scenes not suitable for children. If you  
set a rating for the DVD Recorder+VCR, all scenes with the same rating or  
lower will be played. Higher rated scenes will not be played unless an  
alternative scene is available on the disc. The alternative must have the  
same rating or a lower one. If no suitable alternative is found, playback will  
Audio  
Digital Output  
Dynamic Range  
Virtual Surround  
Off  
Off  
Off  
Instructions  
Enter-Confirm Setup-Exit Move …†  
Select Virtual  
Surround  
stop. You must enter the 4-digit password or change the rating level in order to play the disc.  
Off  
Instructions  
On  
Enter-Confirm Setup-Exit Move …†  
28  
29  
Initial Setup  
Initial Setup  
PREFERENCES / Auto Settings  
8
Press [ENTER] to confirm your rating selection, then press [SETUP] to exit  
the menu.  
Parental Control  
1
While ‘Preferences‘ is selected, press [] to select ‘Auto Settings‘.  
Set Parental Level  
Change Password  
Set Parental Country Code  
ADULT  
2
Press [ENTER] to display the submenu.  
Preferences  
Video  
Audio  
Parental Controls  
Auto Settings  
VCR  
Instructions  
Enter-Confirm Setup-Exit Move …†  
Instructions  
Change Password  
Enter-Confirm Setup-Exit  
Move …†  
Auto Clock Set  
1
2
3
4
While ‘Preferences‘ is selected, press [] to select ‘Parental Controls‘.  
Parental Control  
Auto Clock enables the DVD Recorder+VCR to set the clock automatically  
whenever it is in Standby mode (plugged in but powered off).  
Press [ENTER]. The ‘Parental Controls‘ submenu appears.  
Auto Settings  
Set Parental Level  
Change Password  
Set Parental Country Code  
ADULT  
Use [/] to select ‘Change Password‘ then press [ENTER].  
Auto Clock is only available for models with the VPS/PDC function.  
Some broadcasting stations may send the time and date along with the VPS/PDC  
data. The video will automatically use this time and date during the initial setting  
up procedure during normal use, and every time you switch the video off at the  
mains. If you find that this time and date is incorrect you can remove this feature  
by following the steps below changing it to the OFF mode, you will then have to  
manually set the time and date, see above.  
Auto Clock Set  
AV Link  
Off  
Select Auto  
Clock Status  
The ‘Change Password’ submenu appears. Enter your current 4-digit  
password.  
VPS/PDC  
Off  
On  
Instructions  
Enter-Confirm Setup-Exit Move …†  
5
Enter a new 4-digit password. Re-enter the new password to confirm, press  
[ENTER].  
Instructions  
Enter-Confirm Setup-Exit Move …†  
Change Password  
Master Password : If you forget your password, press 3,3,0,8 on the remote  
control and then press [ENTER].  
Set the new password to something other than '0000'.  
1
2
Use [/] to select 'Auto Clock Set' and press [ENTER].  
Use [/] to change the 'Auto Clock Set' status, and press [ENTER] to confirm.  
Current Code  
Enter New Code  
Confirm Code  
* * * *  
* * * *  
* * _ _  
AV Link  
Instructions  
Setup-Exit  
If your TV is AV Link available, you can download the channels  
information from your TV set, connecting the SCART1 jack to TV.  
Auto Settings  
Auto Clock Set  
AV Link  
On  
Off  
Follow the same procedure as ‘Auto Clock Set’ to set the ‘AV Link’ status.  
Set Parental Country Code  
Select AV  
VPS/PDC  
LInk Status  
1
While ‘Preferences‘ is selected, press [] to select ‘Parental Controls‘. Then  
press [] to select ‘Set Parental Country Code‘.  
Parental Control  
Off  
On  
Set Parental Level  
Change Password  
Set Parental Country Code  
ADULT  
2
3
Press [ENTER]. Enter your current 4-digit password then press [ENTER].  
Instructions  
Enter-Confirm Setup-Exit Move …†  
Use [/] to select the desired country and press [ENTER] to confirm.  
VPS/PDC  
VPS/PDC is a service provided by some stations to enable you to perform  
timer recordings precisely even if the broadcaster delays the start time of  
the programme slightly. The time you enter is the VPS/PDC time so this  
must be correct. Not all stations offer VPS/PDC, in which case the player  
will start at the time you enter and not the actual start time of the  
programme.  
If you wish to start recording at a specific time without it being adjusted  
by the VPS/PDC system in the event of a delay, switch VPS/PDC off  
otherwise the player will not record.  
Auto Settings  
Instructions  
Auto Clock Set  
AV Link  
VPS/PDC  
On  
On  
Off  
Enter-Confirm Setup-Exit Move …†  
Select VPS/  
Parental Country Code  
PDC Status  
Please select Country for Parental Setup  
Off  
On  
Australia  
Belgium  
Instructions  
Enter-Confirm Setup-Exit Move …†  
Denmark  
Finland  
France  
Follow the same procedure as ‘Auto Clock Set’ to set the ‘VPS/PDC’  
status.  
Instructions  
Enter-Confirm Setup-Exit Move …†  
"VPS/PDC" and "Auto Clock Set" are not provided for some countries.  
30  
31  
Initial Setup  
On-Screen Display Overview  
On-Screen Display Overview  
The On-Screen Display provides feedback on the status of the DVD Recorder+VCR and/or the currently loaded  
disc or tape. To access the On-Screen Display (or OSD), press [DISPLAY].  
VCR  
This feature enables you to search for Index marks or specific times on your VHS  
tapes.  
Preferences  
Video  
Audio  
Parental Controls  
Auto Settings  
VCR  
Displaying Disc Information  
To display information about the currently loaded disc or tape:  
1
2
3
4
5
While ‘Preferences‘ is selected, press [] to move to the second level.  
Use [/] to select ‘VCR‘.  
On-screen display operation  
Press [ENTER] to display the submenu.  
1
2
Press [DISPLAY] repeatedly to display/change the information displayed on-screen.  
Instructions  
Enter-Confirm Setup-Exit  
Move …†  
Select ‘Index+’, ‘Index–’ or ‘Go to Zero’.  
To remove the on-screen display, press [DISPLAY] repeatedly until it disappears.  
If you select ‘Index+’ (or ‘Index–’) and press [ENTER], your DVD Recorder+  
VCR will locate your index mark and begin playback.  
See the descriptions below for detailed explanations of the on-screen displays for each media type.  
Some discs may not provide all the features shown in the on-screen display examples.  
6
If you select ‘Go-To Search’ and press [ENTER], your DVD Recorder+ VCR will wind to the position 0:00:00  
and stop.  
Temporary Feedback Icons  
VCR  
VCR  
VCR  
Action prohibited or not available  
Index+  
Index+  
Index+  
Index–  
Go to Zero  
Index–  
Go to Zero  
Index–  
Go to Zero  
Changing TV Channels  
The VCR menu is activated only when a video cassette tape is inserted.  
If no disc is playing, you can change TV channels using the [0-9] or [PR+/–] buttons on the remote control or  
[PR+/–] buttons on the front panel.  
System Information  
System Information helps service personnel identify key firmware information  
about your DVD Recorder+VCR in case service is required.  
System Info  
Version  
Main Build  
Changing the TV Audio Channel  
You can change the TV audio using the [AUDIO] button.  
EP Set 1.0  
DR3-1.0.2  
0.0.0  
1.0.0  
DVS-RA20  
Micom Software  
DVD Navigation  
Loader Version  
Press [AUDIO] repeatedly to change the TV audio, according to the Broadcast audio signal as shown below.  
STEREO Audio Signal  
Stereo Mono Stereo  
Instructions  
Enter-Confirm Setup-Exit  
Move …†  
• BIL Audio Signal  
BIL I BIL II (BIL Off) BIL I  
Restore Defaults  
If you wish, you can reset the DVD Recorder+VCR to its original factory  
settings.  
MONO Audio Signal  
Mono  
Restore Defaults  
1
2
3
4
Press [SETUP].  
The current audio channel is displayed on-screen.  
• If the sound is poor quality when set to Stereo, you can often improve it by changing to Mono.  
• When an external input is selected, the audio channel can be switched only to Stereo.  
If you select this function all  
settings will be removed and  
Use [œ/] to select ‘Restore Defaults‘.  
Press [ENTER].  
Are you sure you want to restore  
the pr
default settings?  
initial
Yes  
The Initialize menu will appear. Use the [/] buttons to select  
‘Yes‘ and press [ENTER].  
No  
Instruc
Enter-Confirm Setup-Exit  
Move …†  
Some options cannot be reset, including Parental Controls, Password,  
and Country Code.  
After Restoring Defaults the unit reboots automatically and the Installation menu appears. You must set the  
country, language, channel, and clock settings again.  
32  
33  
On-Screen Display Overview  
On-Screen Display Overview  
OSD Menu Options for DVD  
Subtitle  
During DVD playback, press [DISPLAY] to show information about the current disc.  
While the disc information is displayed, press [DISPLAY] again to show the disc  
remaining time.  
Shows the current subtitle language, and changes the setting.  
1
2
3
Press [DISPLAY] during playback. The on-screen display appears on the TV screen.  
Use […†] to select the ‘Subtitle‘ icon on the on-screen display. Press [ENTER] to display a submenu.  
Use […†] to change the numbers.  
4
Press [ENTER] to confirm.  
Elapsed  
Shows the elapsed playing time, and skips to the desired time.  
Title  
1
2
Press [DISPLAY] during playback. The on-screen display appears on the TV screen.  
Shows the current title number and total number of titles, and skips to the desired title number.  
Use […†] to select the ‘Elapsed’ icon on the on-screen display. Press [ENTER] to search by time. The  
submenu appears.  
1
2
3
4
Press [DISPLAY] during playback. The on-screen display appears on the TV screen.  
Use […†] to select the ‘Title‘ icon on the on-screen display. Press [ENTER] to display a submenu.  
Use […†] to change the numbers.  
3
4
Use […†] to change the numbers and use [œ √] to move left or right.  
Within 7 seconds, press [ENTER] to confirm the start time. Playback starts from the selected time on the  
disc.  
Press [ENTER] to confirm.  
For the title recorded without DVD navigation information, such as the one from broadcast or line input, ‘Elapsed’  
function does not work.  
Chapter  
Shows the current chapter number and total number of chapters, and skips to the desired chapter number.  
1
2
3
Press [DISPLAY] during playback. The on-screen display appears on the TV screen.  
Use […†] to select the ‘Chapter‘ icon on the on-screen display. Press [ENTER] to display a submenu.  
Use […†] to change the numbers.  
4
Press [ENTER] to confirm.  
Angle  
Shows the current angle number and total number of angles, and changes the angle number.  
1
2
3
Press [DISPLAY] during playback. The on-screen display appears on the TV screen.  
Use […†] to select the ‘Angle‘ icon on the on-screen display. Press [ENTER] to display a submenu.  
Use […†] to change the numbers.  
4
Press [ENTER] to confirm.  
Audio  
Shows the current audio soundtrack language, encoding method, and channel number, and changes the setting.  
1
2
3
Press [DISPLAY] during playback. The on-screen display appears on the TV screen.  
Use […†] to select the ‘Audio‘ icon on the on-screen display. Press [ENTER] to display a submenu.  
Use […†] to change the numbers.  
4
Press [ENTER] to confirm.  
34  
35  
DVD Playback  
DVD Playback  
DVD Playback  
Playing a DVD  
Changing the Audio Language  
1
Press [DVD] to set the remote control to operate the DVD deck.  
Press [AUDIO] and then press  
track.  
[
AUDIO  
]
repeatedly during playback to hear a different audio language or audio  
Turn the TV on and select the video input source connected to the DVD Recorder+VCR.  
Audio system: Turn the audio system on and select the input source connected to the DVD Recorder+VCR.  
Press [OPEN/CLOSE] to open the disc tray.  
Subtitles  
Press [SUBTITLE] and then press  
languages.  
[SUBTITLE] repeatedly during playback to select among all available subtitle  
2
3
4
5
Load your disc in the tray with the playback side down (label side up).  
Press [OPEN/CLOSE] to close the tray.  
Camera Angle  
If a DVD contains scenes recorded at different camera angles, angle icon displays automatically. You can select  
among these angles during playback.  
’READING’ appears on the front panel display, and playback starts automatically. If playback does not start,  
press [PLAY ()]. In some cases, the Disc menu might appear instead.  
Press [ANGLE] and then press it repeatedly during playback to select the desired angle.  
The number of the current angle appears on the TV screen.  
Playing a DVD+R (+RW)  
When a DVD+RW or unfinalized DVD+R is inserted, no title is played automatically but the current TV channel  
displays on the screen.  
The Camera Angle icon is displayed on the TV screen when alternate angles are available.  
If you want to play a title on the DVD+R (+RW), you must press [MENU] or [PLAY] to display the disc menu.  
Select a title to play then press [ENTER].  
Zoom  
The Zoom function allows you to magnify the video image and scroll around the enlarged image.  
If a Disc menu is displayed  
1
Press [ZOOM] during Play mode to activate the Zoom function.  
A Disc menu may be displayed when you load a DVD. Use the [œ √…†] buttons to select the title/chapter you  
Each press of the [ZOOM] button changes the Zoom level as follows: X1 (normal size) X2 X4 X1  
(normal size)  
want to view, then press [ENTER] to start playback. Press [TITLE] or [MENU] to return to the Disc menu.  
If the Parental Level feature is set and the disc is below the current Parental Level setting, the 4-digit code must  
be entered and/or the disc must be authorized; see ‘Set Parental Level‘ on page 29.  
The DVD Recorder+VCR will not play discs with Region codes different from the DVD Recorder+VCR. The Region  
code for this DVD Recorder+VCR is 2 (two).  
Unless stated otherwise, all operations described below use the remote control. Some features may also be  
available in the Setup menu.  
2
3
Use the [œ √…†] buttons to scroll around the zoomed picture.  
To resume normal playback, press [ZOOM] repeatedly until the X1 (normal picture) appears.  
The Zoom function may not work on some DVDs.  
The Zoom function does not work in PAUSE mode.  
A disc which is recorded by computer at high speeds (greater than or equal to 2x) may not be recognized.  
A disc which is recorded with unauthorized movie material may not be played.  
A disc which is recorded by other recorder or not recorded correctly may not be recognized or played.  
Repeat  
1
2
3
4
To repeat the currently playing chapter, press [REPEAT]. ‘REPEAT CHAPTER’ appears on the TV screen.  
To repeat the currently playing title, press [REPEAT] twice. ‘REPEAT TITLE’ appears on the TV screen.  
To repeat the whole disc, press [REPEAT] three times. ‘REPEAT DISC’ appears on the TV screen.  
You can play in other modes (including Repeat, A-B, Shuffle, or Scan) by pressing [REPEAT] repeatedly.  
Still Picture and Frame-by-Frame Playback  
1
2
Press [PLAY/PAUSE] during playback. The DVD Recorder+VCR will go into Still mode.  
You can back up or advance the picture frame-by-frame by pressing [FF ()] repeatedly during Still mode.  
You can repeat a scene that starts when ‘Repeat A-‘ displays on the screen. To mark the end point, press [A-B].  
Press [A-B] again to repeat the scene.  
Fast Forward/Backward  
1
2
Press [REW (œœ )] or [FF ()] during playback. The DVD Recorder+VCR will go into Search mode.  
A-B  
Press [REW] or [FF] to select the desired speed: X2, X4, X8, X16, X32, (forward) or  
You can repeat a scene between two points (A and B):  
œ
, œœ X2, œœ X4, œœ X8, œœ X16, œœ X32 (backward).  
1
2
3
4
5
Press [PLAY/PAUSE] play to the start of the desired scene.  
Press [A-B] to mark the start point.  
Slow Motion  
Press [SLOW+] to enter Slow Motion mode. The default speed is 1/2. When you press [SLOW+] repeatedly, the  
speed will be set to 1/4, 1/8, and normal speed.  
Use [FF], [NEXT] to search the end point.  
Press [A-B] to mark the end point.  
Slow reverse playback is not supported.  
The marked scenes are repeated continuously until you stop the repeat by pressing [A-B] button again.  
36  
37  
DVD Playback  
VCR Playback  
VCR Playback  
Before You Begin  
Press the VCR button to set the remote control to operate the VCR deck.  
Turn the TV on and select the video input source connected to the DVD Recorder+VCR.  
Audio system: Turn the audio system on and select the input source connected to the DVD Recorder+VCR.  
Search  
1
2
Press [SEARCH] to display the Search menu.  
T/  
3
C
1
Use [œ √] to move to Title (T) or Chapter (C) and use […†] to set the title or chapter  
number.  
œ
Selecting Titles  
When a disc has more than one title, you can select among all available titles as follows:  
1
Press [DISPLAY] and use […†] to select the Title icon. Press [ENTER] to display a submenu. Use […†] to  
select the desired title number and press [ENTER] to confirm.  
Playing a VHS Tape  
1
Insert a prerecorded video cassette.  
If the DVD Recorder+VCR is powered off, it will power on automatically.  
Make sure the TIMER indicator on the front panel display is not lit. If it is, press [POWER] once.  
If a tape without a safety tab is inserted, the DVD Recorder+VCR will start playback automatically.  
Selecting Chapters  
When a title on a disc has more than one chapter, you can select among all available chapters as follows:  
1
2
Press [PREV (§)] or [NEXT ()] briefly during playback to select the next or previous chapter.  
To skip directly to any chapter during playback, press [DISPLAY]. Use […†] to select the Chapter icon, then  
press [ENTER] to display a submenu. Use […†] to select the desired chapter number and press [ENTER] to  
confirm.  
If the DVD Recorder+VCR is powered on by inserting a video cassette, playback will not start automatically.  
2
3
Press [PLAY/PAUSE].  
The PLAY icon appears on the TV screen. It is not necessary to select the tape speed (SP, LP) for playback.  
It will be automatically selected by the DVD Recorder+VCR.  
Disc Menus  
Many DVDs contain Disc menus that allow you to access special features. To open a Disc menu, press [MENU].  
Then use the [0-9] buttons to directly select the desired options, or use the […†] buttons to highlight your  
desired selection and press [ENTER].  
Press [STOP] to stop playback.  
The STOP icon appears on the TV screen. If the tape reaches the end before [STOP] is pressed, the DVD  
Recorder+VCR will automatically stop, rewind, and eject the tape.  
1
2
Press [MENU]. The Disc menu is displayed.  
To exit the Disc menu, press [STOP] or [TV VIEW].  
Title Menus  
1
Press [TITLE]. If the current title has a menu, the Title menu will appear on the TV screen. Otherwise, the  
Disc menu may appear.  
Tracking Control  
2
The Title menu may contain camera angles, spoken languages and subtitle options, as well as the chapters  
for the title.  
Auto Tracking  
The automatic tracking function adjusts the picture to remove snow or streaks. It works in the following cases:  
• When a tape is played for the first time.  
• When the tape speed (SP, LP) changes.  
• When streaks or snow appear because of scratches on the tape.  
Manual Tracking  
If noise appears on the screen during playback, press the [TRACKING +/-] buttons on the remote control until  
the noise on the screen is reduced.  
• In case of vertical jitter, adjust these controls very carefully.  
• Tracking is automatically reset to normal when the tape is ejected or the power cord is unplugged for more  
than 3 seconds.  
38  
39  
VCR Playback  
Other Disc Playback  
Other Disc Playback  
Special Playback Features  
Audio CD/MP3 PLAYBACK  
The DVD Recorder+VCR can play audio CDs and MP3 files on CD-ROM,  
CD-R or CD-RW discs.  
Notes on special playback features  
Horizontal lines (noise bars) will appear on the TV screen. This is normal.  
The audio is automatically muted during special playback modes, so there is no sound during search, slow motion, etc.  
During high-speed picture search, a short time is needed to stabilize tape speed when re-entering Play mode. Slight  
interference may be observed during this time.  
1
Insert the CD disc and close the tray. The Audio CD or MP3 CD menu  
appears on the TV screen after a few moments to load the disc.  
••• Audio CD •••  
2
Use […†] to select a track or a file, then press [PLAY] or [ENTER].  
Fast Forward/Backward  
This function lets you visually search forward and backward for a desired scene on your tape.  
During playback, the current track's elapsed playing time will appear  
on the front panel display and menu. Playback will stop at the end of  
the disc.  
1
Press [REW] or [FF] during playback.  
On the MP3 CD menu, you can display the folders on the disc. Use  
[…†œ √] to select the folder icon on the MP3 CD menu then press  
[ENTER] or [PLAY]. You can also display just the tracks in the folders. Use  
[…†œ √] to select a folder then press [ENTER].  
Search mode will be activated.  
If the DVD Recorder+VCR is left in Search mode for more than 3 minutes, the DVD Recorder+VCR will  
automatically resume Play mode to protect the tape and video heads.  
••• MP3 •••  
2
To return to normal playback, press [PLAY].  
3
4
5
While playing an Audio CD, use [FF] or [REW] for 2x speed playback.  
Use [PLAY/PAUSE] to pause playback while the disc is playing.  
To stop playback at any time, press [STOP].  
Still Picture  
1
Press [PLAY/PAUSE] during playback.  
A still picture appears on the TV screen.  
If a still picture vibrates vertically, stabilize it by using the [TRACKING +/-] buttons on the remote control.  
If the DVD Recorder+VCR is left in Still mode for more than 5 minutes, the DVD Recorder+VCR will  
automatically enter Stop mode to protect the tape and video heads.  
Press [REPEAT] to repeat a track (file) and press again to repeat the  
whole disc.  
If the disc contains JPEG files as well as MP3 files, you can change the  
Play mode to display JPEG image files by pressing [TITLE].  
2
To return to normal playback, press [PLAY].  
Slow Motion  
1
2
Press [SLOW+] for Slow Motion playback.  
Press [SLOW+] and [SLOW-] repeatedly to adjust the Slow Motion playback speed.  
JPEG PLAYBACK  
The DVD Recorder+VCR can display JPEG files on CD-R/RW.  
Counter Memory Function  
This is useful if there is a section of tape you want to view immediately after recording or if you want to return  
to the same point several times.  
1
Insert your CD and close the tray. The JPEG CD folder tree appears.  
1
2
Begin recording or playing a tape.  
At the point you want to locate later, reset the real-time counter to 0:00:00 by pressing [CLEAR]. Continue  
to play or record.  
3
4
Press [STOP] when recording or playback finishes.  
You can make the tape automatically stop when the counter returns to about ‘0:00:00‘ by setting the  
counter to ‘0:00:00‘ in the ‘Go-To Search‘ function under ‘Setup’ ‘Preferences’ ‘VCR’; see page 32.  
2
If there are folders which contain JPEG files, select the desired folder  
using […†œ √] and press [ENTER].  
40  
41  
Other Disc Playback  
Basic Recording  
Basic Recording  
Recording from TV  
Follow the instructions below to record a TV program.  
3
Select the thumbnail you want to display using […†œ √] and press  
[ENTER].  
1
Turn on the DVD Recorder+VCR and load a recordable disc or tape.  
Make sure your TV input is set to view the DVD Recorder+VCR.  
Set the desired Recording mode by pressing [REC MODE] repeatedly.  
2
DVD: HQ (High Quality - 1 hr/disc), SP (Standard Play - 2 hrs/disc), EP (Extended Play - 4 hrs/disc), or SLP  
(Super Long Play - 6 hrs/disc).  
VCR: SP (Standard Play), LP (Long Play - 2 times SP)  
3
4
If your DVD Recorder+VCR does not show a TV program, press [TV VIEW] on the remote control. Use [PR+/–] to  
select the TV channel you wish to record.  
4
5
The full size image will be displayed and a slide show starts  
automatically with a time interval of 10 seconds.  
Press [AUDIO] to select the audio channel to record (Stereo, BIL, or Mono).  
The table below shows what audio channel will be recorded with different settings and different types of  
broadcasts.  
Press [NEXT] or [PREV] to manually skip to the next or previous image.  
The last column (Monitor Audio) shows what you will hear during recording. For example, if the TV  
broadcast is in Stereo, then setting the DVD Recorder+VCR to Stereo will record the broadcast in Stereo,  
and the Monitor Audio will also be in Stereo.  
6
7
Press [] (or [œ]) to rotate the image (counter) clockwise.  
Broadcast Audio  
Monitor  
Audio  
MONO  
STEREO  
MONO  
BIL I  
TV Broadcast  
Selected Audio  
L Ch  
R Ch  
MONO  
R
MONO  
BIL I  
Press [STOP] to exit the slideshow.  
MONO  
MONO  
STEREO  
MONO  
BIL I  
BIL II  
(BIL Off)  
MONO  
L
MONO  
BIL I  
STEREO  
If the disc contains MP3 files as well as JPEG files, you can change the  
Play mode to play MP3 files by pressing [TITLE].  
When a CD contains both MP3 files and JPEG files, the default Play  
mode is JPEG image files.  
BIL  
BIL II  
(BIL I)  
BIL II  
(BIL I)  
BIL II  
(BIL Off)  
The DVD Recorder+VCR can playback up to 1000 files per disc.  
MP3 files encoded below 64kbps are not supported.  
5
6
Press [REC (G)] once.  
Recording will start. The REC indicator lights on the front panel display.  
Recording continues until you press [STOP] or the disc is full.  
To record for a fixed length of time, see One Touch Record on the next page.  
Press [STOP (I)] to stop recording.  
Playing MP3 Files During a Slide Show  
You can enjoy a slide show while listening to MP3 music files.  
The maximum number of DVD titles per disc is 49. If the DVD Recorder+VCR is powered off during DVD recording,  
the recording will not be saved.  
1
2
3
4
5
Prepare a CD which includes both MP3 and JPEG files.  
Insert the CD and play an MP3 file.  
If a DVD+RW or unfinalized DVD+R disc is inserted in the tray, no title is played automatically after loading is  
finished.  
If you are recording to a blank DVD+R (+RW) disc, it may take up to 7 minutes (it depends on disc) for post  
processing after recording.  
Press [TITLE] while playing the MP3 file to change the Play mode. The music playback will not stop.  
Select an image file and press [ENTER] to start the slide show.  
The MP3 file you selected continues to play during the JPEG slide show.  
42  
43  
Basic Recording  
Basic Recording  
One Touch Record (OTR)  
One Touch Copy - DVD to VHS  
One Touch Recording allows you add recording time in fixed increments at the touch of a button.  
• If the DVD you are attempting to copy is copy-protected, you will not be able to copy the disc. It is not permitted to  
copy Macrovision encoded DVDs.  
• Copy to VCR does not work in Progressive Scan Mode.  
1
2
Follow steps 1-4 under Recording from TV.  
Press [REC (G)] repeatedly to set the length of the recording.  
Recording starts after the first press. Each subsequent press increases the recording time by 15 minutes  
(DVD) within the available space or 30 minutes (VCR, to a maximum of 10 hours). The recording time is  
displayed on the front panel display.  
1
2
Insert a Disc.  
Insert the disc you wish to copy in the DVD deck and close the disc tray.  
Insert a VHS Tape.  
Insert a blank VHS videotape into the VCR deck.  
Press [COPY] on the remote control.  
3
4
5
Select (DVD  
VCR) and press [ENTER] or [COPY] to confirm.  
Quick-Copy Menu  
Please Select Quick Record Option  
DVD -> VCR  
VCR -> DVD  
Checking the Recording Time  
Total time and recorded time are displayed on the TV screen after pressing [DISPLAY]. Recorded time is  
displayed on the front panel display.  
Press [REC SPEED] or [/] to select the desired Record Mode in ‘Copy to  
Tape’ menu:  
• SP (Standard Play)  
• LP (Long Play, 2 times SP).  
Instructions  
Enter-Confirm Move …†  
6
7
Press [COPY] again to start copying.  
Stop the Copy Process  
To stop copying at any time, press [STOP]. You must stop the Copy process manually  
when the DVD movie ends, or the unit may replay and record over and over again.  
Copy to Tape  
Choose speed then  
press COPY:  
LP  
To Pause the Recording  
SP  
If you want to start copy any point of disc  
1
2
Press [PLAY/PAUSE] to pause the disc or tape during recording.  
1. Find the place on the DVD (or Disc) from which you want to start recording using the  
[PLAY/PAUSE], [REW] and [FF] functions.  
2. Press [COPY] while DVD is in pause mode or in resume stop ( » STOP) mode.  
3. Follow the same procedure 5-7.  
I
I I Stop  
When you want to continue recording, press [PLAY/PAUSE] or [REC (G)] in DVD mode and press [REC (G)]  
in VCR mode.  
Note  
To quit One Touch Recording, press and hold [STOP] for 3 seconds.  
The DVD Recorder+VCR will automatically power off when One Touch Recording ends.  
Tip (VCR mode only)  
Always use [PLAY/PAUSE] for best results when making changes during recording.  
For example: To change channels during recording, first press [PLAY/PAUSE] to put the unit in Pause mode. Then  
select the desired channel on the DVD Recorder+VCR, and press [REC (G)] again to resume recording.  
You cannot record on the VCR deck and DVD deck at the same time.  
While the VCR is recording, DVD playback is possible. However, while the DVD is recording, all VCR functions are  
disabled.  
Copy Edit (DVD VCR)  
During one touch copy you can search or change REC SPEED and resume copy.  
1
2
3
4
During One Touch Copy press [PLAY/PAUSE] to enter COPY EDIT mode.  
Search with [FF/REW] or [NEXT/PREV] button.  
Press [COPY] and you can change REC SPEED.  
Press [COPY] again to resume copy.  
44  
45  
Basic Recording  
Timer Recording  
Timer Recording  
One Touch Copy - VHS to DVD  
Timer Recording using Manual Set Record Screen  
You can copy the contents of a VHS tape to a DVD+R or DVD+RW using the [COPY] button. This allows you to  
archive your old VHS tapes to DVD.  
The Timer Recording function allows you to record up to 8 programs within a period of one month.  
1
2
Insert recordable media such as DVD+R ,DVD+RW, recordable VHS tape.  
If the VHS videotape you are attempting to copy is copy-protected, you will not be able to copy the tape. It is not  
permitted to copy Macrovision encoded tapes.  
Press [TIMER].  
The ‘Please Select Record Method’ menu appears.  
1
2
Insert a VHS Tape.  
Please Select Record Method  
3
Select ‘Manual Set Record Screen’ with [/] and confirm with [ENTER].  
The ‘Timer Recording’ menu appears.  
Use […†] to move to a timer recording slot, and press [ENTER] to modify it.  
If you did not set the clock on the DVD Recorder+VCR, you must do so before  
programming a timer recording.  
Insert the VHS videotape you wish to copy into the VCR deck.  
Insert a DVD+R or DVD+RW disc.  
Insert a blank DVD+R or DVD+RW disc in the DVD deck and close the disc tray.  
Please Select Screen for Entering  
Set Record Details.  
Manual Set Record Screen  
VideoPlus  
When using a DVD+RW disc, you must initialize before copying; see page 50.  
• Media - Choose desired media (DVD or VHS) using […†].  
• PR No. – Choose the desired channel, or one of the external inputs from  
which to record.  
Instructions  
Enter-Confirm Setup-Exit Move …†  
3
Find the place on the VHS tape from which you want to start recording using the [PLAY/PAUSE], [FF] and [REW]  
functions. And press [STOP].  
• Date – Choose a date up to 1 month in advance, or select a daily or weekly  
program.  
• Start Time – Set the recording start time.  
• End Time – Set the recording end time.  
• Mode – Choose a Record mode.  
• Repeat-Choose frequency of the recording. Once, Daily, Weekly, Weekday.  
DVD: HQ, SP, SLP or EP  
VCR: SP, LP  
Timer Recording  
4
5
6
Press [COPY] on the remote control.  
PR No. Date Start End Mode  
---- --/-- --:-- --:-- ---  
---- --/-- --:-- --:-- ---  
---- --/-- --:-- --:-- ---  
---- --/-- --:-- --:-- ---  
---- --/-- --:-- --:-- ---  
---- --/-- --:-- --:-- ---  
---- --/-- --:-- --:-- ---  
---- --/-- --:-- --:-- ---  
Instructions  
Select (VCRDVD) and press [ENTER] or [COPY].  
Quick-Copy Menu  
Please Select Quick Record Option  
DVD -> VCR  
Press [REC SPEED] or [/] to select the desired  
Copy to Disc  
Choose quality then  
press COPY:  
HQ  
SP  
EP  
Record Mode in ‘Copy to Disc’ menu:  
VCR -> DVD  
Instructions  
Enter-Confirm Move …†  
• HQ (High Quality - 1 hr/disc)  
• SP (Standard Play - 2 hrs/disc)  
• EP (Extended Play - 4 hrs/disc)  
• SLP (Super Long Play - 6 hrs/disc)  
Enter-Edit Setup-Exit Move …†  
4
5
Enter the necessary information for your Timer Recording(s).  
SLP  
DVD Status  
œ √ – Moves the cursor left/right.  
Edit Timer  
Media  
PR No.  
Date  
Start  
End  
Mode  
Repeat  
Delete  
I Stop  
0 : 00 : 10  
7
8
Press [COPY] again to start copying.  
…† – Changes the setting at the current cursor position.  
• Press [SETUP] to exit the Timer Record menu.  
• Press [ENTER] after filling in all the program information.  
• Press [TIMER] to display the Timer Record List.  
PR-03  
Jan/02 Sun  
13:30  
14:30  
HQ  
Stop the Copy Process  
Copy to Disc  
To stop copying at any time, press [STOP].  
Copying will stop automatically when the VHS tape ends.  
Updating the disc. This may take a few  
minutes. Please wait...  
Press [ENTER] to save the program.  
The Timer Record List will appear.  
Press [SETUP] to exit the Timer Record List.  
Once  
Instructions  
Setup-Exit  
Instructions  
Enter-Save Setup-Exit  
6
7
Timer indicator will light or blinking. Power Off the DVD Recorder+VCR to start  
the Timer Recording.  
Timer Recording  
PR No. Date Start End Mode  
PR03 01/02 13:30 14:30 HQ  
---- --/-- --:-- --:-- ---  
---- --/-- --:-- --:-- ---  
---- --/-- --:-- --:-- ---  
---- --/-- --:-- --:-- ---  
---- --/-- --:-- --:-- ---  
---- --/-- --:-- --:-- ---  
---- --/-- --:-- --:-- ---  
Instructions  
Copy Edit (VCR DVD)  
During one touch copy you can search and resume copy.  
Note  
The Timer indicator lights on the front panel display when the DVD  
Recorder+VCR is ready for the Timer Recording.  
1
2
3
4
Press [PLAY/PAUSE] to enter COPY EDIT mode.  
Press [PLAY/PAUSE] again to playback.  
Search with [FF/REW] button.  
The tape timer indicator is blinking if any of the following meets if no  
recordable tape is inserted. Both the disc and tape timer indicators are blinking  
if tape and disc timer recordings are overlapped.  
Enter-Edit Setup-Exit Move …†  
Press [COPY] to resume copy.  
• The DVD Recorder+VCR will automatically power off when the Timer  
Recording ends.  
There is a short delay when a timer recording finishes to confirm the recorded  
program. If two timer recordings are set to record sequentially (one right after  
the other), the very beginning of the later program may not be recorded.  
46  
47  
Timer Recording  
Timer Recording  
Timer Recording using VideoPlus system  
Canceling a Timer Recording  
Thanks to this programming system, you no longer need to tediously enter the date, programme number, start  
and end time. All the information needed by the DVD recorder for programming is contained in the VideoPlus  
programming number. This VideoPlus number is found in most TV listings.  
You can clear a Timer Recording any time before the recording actually starts.  
• Use […†] to select the program you want to erase on the Timer Recorder List, then press [ENTER] to  
modify it. Use [œ √] to select 'Delete' then press [ENTER].  
1
2
Insert recordable media such as DVD+R ,DVD+RW, recordable VHS tape.  
Press [TIMER].  
The ‘Please Select Record Method’ menu appears.  
Please Select Record Method  
Please Select Screen for Entering  
Set Record Details.  
Stopping a Timer Recording in Progress  
After a Timer Recording has started, you can still cancel the program by pressing and holding [STOP] for 3  
seconds.  
Manual Set Record Screen  
VideoPlus  
Instructions  
Enter-Confirm Setup-Exit Move …†  
Timer Recording Troubleshooting  
3
4
Select ‘VideoPlus’ with [/] and confirm with [ENTER].  
VideoPlus  
The ‘VideoPlus’ menu appears.  
Even if a Timer Recording is set, the DVD Recorder+VCR will not record if:  
• No disc is loaded.  
• A non-recordable disc is loaded.  
• DISC Lock is set to ON in the DISC Settings menu; see page 52.  
• There are already 49 titles recorded on the disc.  
Please enter your VideoPlus Code.  
– – – – – – – – –  
Enter the entire ‘VideoPlus’ number. This number is up to 9 digits long and  
can be found next to the start time of the TV programme in your TV listings  
megazine.  
e.g.: 5-234-89 or 5 234 89  
Enter 523489 for the ‘VideoPlus’ number.  
If you make a mistake, you can clear it with [CLEAR].  
Press [ENTER] to confirm.  
Instructions  
Enter-Edit Setup-Exit Move …†  
You cannot enter a Timer Recording if:  
• A recording is already under way.  
• The start time has already passed.  
• Eight Timer Recordings have already been set.  
Timer Recording  
PR No. Date Start End Mode  
PR03 01/02 13:30 14:30 HQ  
---- --/-- --:-- --:-- ---  
---- --/-- --:-- --:-- ---  
---- --/-- --:-- --:-- ---  
---- --/-- --:-- --:-- ---  
---- --/-- --:-- --:-- ---  
---- --/-- --:-- --:-- ---  
---- --/-- --:-- --:-- ---  
Instructions  
If two or more Timer Recordings overlap:  
• The earlier program takes priority.  
• When the earlier program finishes, the later program starts.  
• If two programs are set to start at exactly the same time, the program entered first takes priority.  
Confirmation is not possible when:  
• The DISC Protect setting is set to ON.  
• There are already 49 titles recorded on the disc.  
Enter-Edit Setup-Exit Move …†  
5
The decoded information appears after confirmation. You can go back at any  
time to change the information by pressing [ENTER]. Select the appropriate  
input field using […†]. If required, change the information using […†].  
Edit Timer  
Media  
If the disc is damaged, the recording may not complete successfully, even if the Check field shows ‘Rec. OK‘.  
PR No.  
Date  
Start  
End  
Mode  
Repeat  
Delete  
Instructions  
Enter-Save Setup-Exit  
PR-03  
Jan/02 Sun  
13:30  
14:30  
HQ  
If all the information is correct, press the [ENTER] button. The programming  
information is stored in a TIMER block.  
Recording Priority  
Timer Recording and OTR (One Touch Record) have the same priority but they have lower priority than manual  
recording. During manual recording, Timer Recording or OTR will be ignored.  
6
7
Press [SETUP] to exit the Timer Record List.  
Timer indicator will light or blinking. Power Off the DVD Recorder+VCR to start  
the Timer Recording.  
Once  
VideoPlus is not available for some countries.  
48  
49  
Recording from an External Input  
Recording from an External Input  
Recording from an External Input  
DF-8100P/8150P only  
Recording from External Components  
What is DV?  
You can record from an external component, such as a camcorder or VCR, connected to any of the DVD  
Recorder+VCR’s external inputs.  
Using DV, also known as i.LINK, you can connect a DV-equipped camcorder to the DVD Recorder+VCR using a  
single DV cable for input and output of audio, video, data and control signals.  
The i.LINK interface is also known as IEEE 1394-1995.  
‘i.LINK’ and the ‘i.LINK’ logo are trademarks.  
1
Make sure the component you want to record from is connected properly to the DVD Recorder+VCR; see pages  
15~18.  
• The DVD Recorder+VCR is only compatible with DV-format (DVC-SD) camcorders. Digital satellite tuners  
and Digital VHS video recorders are not compatible.  
• You cannot connect more than one DV camcorder at a time to the DVD Recorder+VCR.  
• You cannot control the DVD Recorder+VCR from external equipment connected via the DV IN jack (including  
two DVD Recorders).  
• It may not always be possible to control the connected camcorder via the DV IN jack.  
• Audio input to the DV IN jack should be 32 or 48kHz (not 44.1kHz).  
2
3
4
Use [PR+/–] or [INPUT] to select the external input to record from.  
Load a recordable disc or tape.  
Set the desired Recording mode by pressing [REC SPEED] repeatedly.  
DVD: HQ (High Quality - 1 hr/disc), SP (Standard Play - 2 hrs/disc), EP (Extended Play - 4 hrs/disc), or SLP  
(Super Long Play - 6 hrs/disc).  
VCR: SP (Standard Play), LP (Long Play - 2 times SP)  
• Picture disturbance on the recording may occur if the source component pauses playback or plays an  
unrecorded section of tape, or if the power fails in the source component, or if the DV cable becomes  
disconnected.  
5
6
Press [REC (G)] once.  
Recording will start. The REC indicator lights on the front panel display.  
Recording continues until you press [STOP] or the disc is full.  
To record for a fixed length of time, see ‘One Touch Record‘ on page 44.  
Press [STOP (I)] to stop recording.  
Note  
If your source is copy-protected, you will not be able to record it using the DVD Recorder+VCR. See ‘Copyright  
Notice‘ on page 8 for more details.  
DF-8100P/8150P only  
Recording from a Digital Camcorder  
You can record from a digital camcorder connected to the DV IN jack on the front panel of the DVD  
Recorder+VCR.  
You can use the DVD Recorder+VCR remote to control both the camcorder and the DVD Recorder+VCR. Before  
recording, make sure the digital camcorder is properly connected to the front panel DV IN jack; see page 18.  
The source signal must be DVC SD format.  
Some camcorders cannot be controlled using the DVD Recorder+VCR remote.  
If you connect a second DVD recorder using a DV cable, you cannot control the second recorder from this one.  
You cannot control the DVD Recorder+VCR remotely from a component connected to the DV IN jack.  
You cannot record date and time information from a DV cassette.  
1
2
Make sure your digital camcorder is connected to the front panel DV IN jack; see page 18.  
Press [INPUT] repeatedly to select the DV input.  
DV appears on the front panel display and the TV screen.  
3
Find the place on the camcorder tape from which you want to start recording.  
For best results, pause playback at the point you want to start recording. Depending on your camcorder, you  
can use the DVD Recorder+VCR remote to control the camcorder using the STOP, PLAY, and PAUSE  
functions.  
4
Press [REC] once to start recording.  
Recording is automatically stopped if the DVD Recorder+VCR detects no signal. You can pause or stop the  
recording by pressing [PLAY/PAUSE] or [STOP]. You cannot control the camcorder from the remote control  
50 during recording.  
51  
Editing  
Editing  
Editing  
DISC Initialize  
Finalize (Make Compatible)  
• If you load a blank DVD+R(+RW) disc, it will be initialized (formatted to enable recording).  
• Do not start recording until disc initialization is complete.  
• If you load a DVD+RW that has already been used you can record a program immediately.  
Finalizing a DVD+R ‘locks’ its recordings in place so the disc can be played on most standard DVD players or  
computers equipped with DVD-ROM drives.  
'Make Compatible' for a DVD+RW will automatically create a menu screen for navigating the disc. This menu  
screen is accessible by pressing [MENU] or [TITLE].  
••• DVD+R disc •••  
••• DVD+RW disc •••  
Once you have finalized a DVD+R disc, you cannot edit or  
record anything else on that disc.  
Disc Menu  
For recordable DVD media, such as DVD+R and DVD+RW discs, you can manage the disc using the Disc Menu.  
The DVD+R Disc Menu allows you to rename your disc or finalize it so it will be compatible with most other  
DVD players.  
The DVD+RW Disc Menu allows you to erase, lock, or unlock your disc. You can also make it compatible with  
most other DVD players.  
1
2
3
Use [] to go to the top menu.  
Finalize  
Make Compatible  
Press [Enter] to make any  
previous title editing  
compatible with your DVD  
player.  
Press [Enter] to make any  
previous title editing  
compatible with your DVD  
player.  
Press [] to display the Disc Information Menu.  
Press [] and select ‘Finalize‘ for a DVD+R, or ‘Make  
Compatible‘ for DVD+RW.  
Information / Erase the disc (DVD+RW)  
Instructions  
Enter-Confirm  
Instructions  
Enter-Confirm  
4
Press [ENTER] as shown on the screen.  
1
2
3
4
Press [MENU] to go to Disc Menu mode.  
In Disc Menu mode, press [] to move to the top menu.  
Press [] to display the Disc Menu.  
Finalize  
Make Compatible  
Make disc compatible with  
Make disc compatible with  
Information  
Erase the disc  
your DVD player.  
your DVD player.  
Type  
DVD+RW  
Press [Enter] if you want  
to erase the disc. All  
existing recordings will  
be cleared.  
Yes  
No  
Yes  
No  
5
Select 'Yes' using [] and press [ENTER] to finalize the disc  
Recordings  
Total Title  
Free Space  
Finalized  
Locked  
5
00:57:57  
01:48:48  
-
(or make the disc compatible if it is a DVD+RW).  
The Disc Menu shows you disc information, such as disc type,  
number of recordings, total titles, free space, etc.  
6
7
Press [ENTER] again.  
No  
Instructions  
Enter-Confirm Move …†  
Instructions  
Enter-Confirm Move …†  
Compatible  
Yes  
5
6
7
Use [œ/] to select the Disc Erase menu.  
Press [SETUP] to go to the top disc menu.  
Instructions  
Setup-Exit  
Instructions  
Enter-Confirm  
If you want to erase the whole disc, press [ENTER].  
Finalize  
Finished.  
Make Compatible  
‘Finalize (Make Compatible)’ can take up to 3-4 minutes  
depending on the type of disc, how much is recorded on the  
disc, and the number of titles on the disc.  
If you do not make your DVD+RW disc compatible, your edits  
will not be recognized by other DVD players.  
Finished.  
Erase the disc  
To confirm, select ‘Yes‘. To cancel, select ‘No‘. If you select ‘Yes‘ and press [ENTER],  
all the contents of the disc will be lost.  
This Disc should already  
be compatible.  
ok  
This Disc should already  
be compatible.  
ok  
Erase the disc?  
All recordings will be lost.  
Yes  
No  
DVD+R discs cannot be locked (unlocked) or erased.  
Instructions  
Enter-Confirm Move …†  
Instructions  
Enter-Confirm Move …†  
Instructions  
Enter-Confirm Move …†  
Lock/Unlock Disc (DVD+RW)  
If you want to protect a disc from accidental recording, editing, or  
erasing, you can lock the disc. Later, if you change your mind, you  
can unlock the disc.  
Lock/Unlock Disc  
Lock/Unlock Disc  
Press [Enter] to lock the  
disc. This prevents future  
disc operations or  
recordings.  
Disc is unlocked.  
1
2
3
4
5
6
7
8
Use [] to go to the top menu.  
Do you want to lock it?  
Yes  
No  
Press [] to display the Disc Information Menu.  
Use [œ/] to select ‘Lock/Unlock Disc’.  
Press [ENTER] as shown on the screen.  
Instructions  
Enter-Confirm  
Instructions  
Enter-Confirm Move …†  
You can see the current disc status (Locked or Unlocked).  
Lock/Unlock Disc  
Changing disc lock status.  
You can change the disc status by selecting ‘Yes‘ and pressing [ENTER].  
The ‘Changing Disc Status’ bar will appear. This process takes a few seconds.  
After the process is finished the menu disappears automatically.  
Please wait a moment....  
52  
53  
Editing  
Editing  
Title Menu  
Change Disc Name  
You can rename your disc to any name you choose. The default disc name is ‘MY DVD‘.  
You can manage the titles on your DVD+R/RW discs using the Title menu.  
Play a Title  
To play a title:  
1
2
3
4
5
6
Use [] to go to the top menu.  
Change Disc Name  
Press [Enter] to change  
Press [] to display the Disc Information Menu.  
Press [] and select ‘Change Disc Name‘.  
Press [ENTER] as shown on the screen.  
The Keyboard Menu appears.  
the disc name.  
1
2
3
4
5
Press [MENU] to display the disc menu.  
Select the desired title you want to manage using […†].  
Press [] to display the title menu.  
Play Title  
Press [Enter] to begin  
playback of title.  
Instructions  
Enter-Confirm  
Select ‘Play Title' using [œ √] .  
Use [œ √…†] to select and press [ENTER] to enter the name of the disc.  
CLR : Clear the disc name  
Press [ENTER] to play the title.  
Change Disc Name  
Instructions  
Enter-Confirm  
MY DVD  
CLR SP DEL SAVE  
1 2 3  
4
5
6
F
7
8
9 0  
SP : Space  
A B C D E  
K L M N O  
U V W X Y  
G H  
I
J
Erase a Title  
P
Z
Q
(
R
)
S T  
DEL : Delete a character  
.
,
:
; &  
1
2
3
Follow steps 1 to 3 under ‘Play Title‘.  
SAVE : Save the disc name  
Enter-Confirm Move …†  
Select ‘Erase Title‘ using [œ √].  
7
8
Press [ENTER] again.  
Press [ENTER] to erase the title.  
Change Disc Name  
To save the name of the disc, select ‘SAVE‘ and press [ENTER].  
Erase Title  
Problem.  
This disc is locked. It  
cannot be renamed.  
ok  
Press [Enter] to erase  
this title.  
If ‘Lock Disc’ is set to ‘On’ in the DISC Settings menu, you cannot rename your disc; see  
page 52.  
Instructions  
Enter-Confirm Move …†  
Instructions  
Enter-Confirm  
4
Select 'Yes' and press [ENTER] to confirm.  
Erase Title  
Would you like to Erase  
the title?  
Yes  
No  
Instructions  
Enter-Confirm Move …†  
5
6
The Erase Title progress bar will be displayed. This may takes several  
seconds.  
Erase Title  
After erasing is complete, the erased title remains as an empty title.  
Title is being erased.  
You can erase titles on DVD+RW discs only.  
Please wait a moment...  
54  
55  
Editing  
Editing  
Editing  
Change Name  
To change the name of a title:  
When you insert a DVD+R or DVD+RW disc already recorded by your DVD Recorder+VCR, you can edit the titles  
and chapters in a variety of ways.  
1
2
3
Follow steps 1 to 3 under ‘Play Title‘.  
Select ‘Change Name’ using [œ √] .  
Press [ENTER] to change the title name.  
To edit a recorded title, select the title on the disc menu and press [EDIT].  
The selected title will begin playing automatically.  
Change Name  
Press [Enter] to change  
the title name.  
After editing is complete, a DVD+RW disc will not be compatible with other DVD players until you make the disc  
compatible; see page 53.  
Instructions  
Enter-Confirm  
Titles and Chapters  
4
5
The Keyboard Menu will be displayed. Use [œ √…†] to select a  
When you insert a DVD+R or DVD+RW disc already recorded by your DVD Recorder+VCR, all titles recorded on  
the disc appear on your screen. If a selected title has chapters, you can skip to the next or previous chapter by  
pressing [NEXT] or [PREV].  
character or function and press [ENTER].  
CLR : Clear the whole title.  
SP : Add a space  
DEL : Delete a character  
SAVE : Save the title name  
Change Name  
TITLE  
You can also see how many chapters are in a title by pressing [DISPLAY] during playback.  
CLR SP DEL SAVE  
1 2 3  
4
5
6
F
7
8
9 0  
A B C D E  
K L M N O  
U V W X Y  
G H  
I
J
P
Z
Q
(
R
)
S T  
Title  
.
,
After the new title name is complete, select ‘SAVE’ and press [ENTER].  
:
; &  
To select a specific title:  
DVD Edit  
Enter-Confirm Move …†  
Title  
1 of 2  
1
2
3
Use […†] to select ‘Title‘.  
Select Title  
1 of 2  
Chapter  
1 of 11  
Edit Chapters  
Hide Chapter  
Press [ENTER] to display the submenu.  
Record Option  
To set DVD+R and DVD+RW recording options:  
Change Index Picture  
Split Title  
Use […†] to select the desired title number and then press [ENTER].  
Instructions  
Enter-Confirm Setup-Exit  
Move …†  
1
2
3
Follow steps 1 to 3 under ‘Play Title‘.  
Record Options  
Press [Enter] to select  
a method for overwriting  
this title.  
Select ‘Record Options’ using [œ √] and press [ENTER].  
Chapter  
To select a specific chapter:  
Select your preferred record options for each disc type (DVD+R and  
DVD+RW):  
DVD Edit  
Title  
1 of 2  
1
2
3
Use […†] to select ‘Chapter‘.  
Select Chapter  
Chapter  
1 of 11  
Edit Chapters  
Hide Chapter  
1 of 11  
For DVD+R  
Press [ENTER] to display the submenu.  
Instructions  
Enter-Confirm  
Change Index Picture  
Split Title  
The last recorded title : Allows you to append your new recording to the  
Use […†] to select the desired chapter number and then press [ENTER].  
end of your last recording, or record it as a new  
title.  
Instructions  
Enter-Confirm Setup-Exit  
Move …†  
Others :  
Allows you to record your new title until the end  
of the disc.  
Edit Chapters  
Record Options  
You can choose  
You can add a chapter marker anywhere in a title during playback.  
For DVD+RW  
The last blank title :  
DVD Edit  
Overwrite then stop  
Overwrite and continue  
(Append to existing)  
Once the chapter is marked, you can use the chapter search feature as  
described above.  
You can add/delete chapter markers or delete all chapter markers in a title.  
Title  
1 of 2  
Allows you to record your new title until the end  
of the disc.  
Choose the edit  
Function  
Add  
Delete  
Delete All  
Chapter  
1 of 11  
Edit Chapters  
Hide Chapter  
The last recorded title : Allows you to record over your last recorded  
title and then stop.  
Change Index Picture  
Split Title  
Instructions  
Enter-Confirm Move …†  
1
2
3
Use […†] to select ‘Edit Chapters‘.  
Instructions  
Enter-Confirm Setup-Exit  
Move …†  
Allows you to record over your last recorded  
title and continue recording until the end of the disc.  
Allows you to append your new recording to the end of your last recording. (option)  
Allows you to record over the title and then stop.  
Press [ENTER] to display the submenu.  
Use […†] to select one of the various chapter marker functions (Add,  
Delete, or Delete All).  
Others :  
Allows you to record over the title and continue recording until the end of the disc.  
4
Press [ENTER] to confirm.  
As overwriting function may take several minutes to finish and save recording, we recommend to delete title and  
record function.  
56  
57  
Editing  
Troubleshooting  
Troubleshooting  
Check the following guide for the possible cause of a problem before contacting customer support.  
Hide Chapters  
Symptom  
Cause  
Solution  
This feature allows you to hide or unhide a chapter. After hiding a chapter, the  
chapter is not deleted but only hidden. If a chapter is hidden then it shows  
‘Unhide Chapter‘ and vice versa.  
DVD Edit  
No power.  
The power cord is disconnected.  
Plug the power cord into the wall outlet  
securely.  
Select the appropriate video input on the  
TV so the picture from the DVD  
Recorder+VCR appears on the TV screen.  
Connect the video cable securely.  
Title  
1 of 2  
Chapter  
1 of 11  
Edit Chapters  
Hide Chapter  
No picture.  
No sound.  
The TV is not set to receive DVD  
Recorder+VCR signal output.  
Change Index Picture  
Split Title  
Instructions  
Enter-Confirm Setup-Exit  
Move …†  
The video cable is not connected  
securely.  
The TV power is turned off.  
The equipment connected with the  
Turn on the TV.  
Select the correct input mode on the audio  
Change Index Picture  
audio cable is not set to receive DVD receiver so you can listen to the sound  
Each title displayed in the Playlist menu is represented by a thumbnail picture  
taken from the start of that title or chapter. If you prefer, you can select a  
different still picture from within the title.  
DVD Edit  
Recorder+VCR signal output.  
The audio cables are not connected  
securely.  
from the DVD Recorder+VCR.  
Connect the audio cables securely.  
Title  
1 of 2  
Chapter  
1 of 11  
Edit Chapters  
Hide Chapter  
Change Picture  
Are you sure?  
Yes  
1
2
3
4
Use […†] to select ‘Change Index Picture‘.  
The power on the equipment  
connected with the audio cable is  
turned off.  
Turn on the equipment connected with the  
audio cable.  
Change Index Picture  
Split Title  
Press [ENTER] to display the submenu.  
No  
Instructions  
Enter-Confirm Setup-Exit  
Move …†  
Use […†] to select ‘Yes‘ if you prefer to change the picture.  
Press [ENTER] when the preferred picture is on your TV screen.  
The audio cables are damaged.  
Replace with new ones.  
Playback picture is poor. The disc is dirty.  
Clean the disc.  
Tape heads are dirty.  
Clean the video heads.  
Tape is a rental or was recorded on  
Use [Tracking +/–] for manual tracking  
adjustment while a tape is playing.  
Insert a disc or tape. (Check that the disc  
indicator on the front panel display is lit.)  
Insert a playable disc. (Check the disc  
type, color system, and regional code.)  
Place the disc with the playback side  
down.  
another VCR.  
Split Title  
DVD Recorder+VCR does No disc is inserted. No tape is  
not start playback.  
DVD Edit  
This feature allows you to split a title into two titles.  
inserted.  
An unplayable disc is inserted.  
Title  
1 of 2  
1
2
3
4
Use […†] to select 'Split Title'.  
Chapter  
1 of 11  
Edit Chapters  
Hide Chapter  
Split the title  
in two?  
Yes  
Press [ENTER] to display the submenu.  
The disc is placed upside down.  
Change Index Picture  
Split Title  
Use […†] to select 'Yes' if you prefer to split the title.  
Press [ENTER] to confirm. It may take a few minutes to split the title.  
No  
Instructions  
Enter-Confirm Setup-Exit  
Move …†  
The disc is not placed within the  
guide.  
The disc is dirty.  
The Parental Control level is set.  
Place the disc on the disc tray correctly  
inside the guide.  
Clean the disc.  
Cancel the Parental Control function or  
change the rating level.  
Split Title  
Splitting title into 2 titles.  
Picture from external  
input is distorted.  
The video signal from the external  
component is copy-protected.  
You cannot connect via the DVD  
Recorder+VCR. Connect the component  
directly to your TV.  
Use the ‘Adjust Channels’ feature to  
restore channels.  
Tighten connections or replace cable.  
Please wait a moment....  
Instructions  
Setup-Exit  
Some channels are skipped The skipped channels were deleted  
over when using [PR+/–].  
Picture or sound of  
broadcasting channel is Wrong Tuning Band is selected in the Try all ‘Auto Set‘ options; see page 23 for  
weak or missing.  
with the ‘Adjust Channels’ feature.  
Antenna or cables are loose.  
Split Title may take several minutes.  
DVD Recorder+VCR Setup menu.  
Camcorder is off.  
details.  
Camcorder image not  
shown.(DF-8100P/8150P only)  
Turn camcorder on and operate properly.  
Camcorder image via A/V DVD Recorder+VCR’s source is not set Use [INPUT] to select AV input channel  
input to DVD Recorder+  
VCR is not shown on TV  
screen.  
to AV1, AV2, AVF, or DV.  
(DV : DF-8100P/8150P only)  
(AV1, AV2, AVF, or DV).  
Can’t play disc recorded The disc was not finalized (or not made Finalize the disc; see page 53.  
on this DVD compatible if using a DVD+RW).  
Recorder+VCR on another Some players will not play even a  
DVD player. finalized disc.  
No solution.  
58  
59  
Troubleshooting  
Technical Specifications  
Technical Specifications  
Symptom  
Cause  
Solution  
General  
Power requirements 200–240V~, 50/60 Hz  
Power consumption 32W  
Dimensions (approx.) 16.9 x 3.54 x 14.0 inches (430 x 91 x 354 mm) (w x h x d)  
Mass (approx.) 13.5 lbs (6.18 kg)  
Discs recorded with copy-once  
material cannot be played on other  
players.  
No solution.  
Cannot record or did not The remaining blank space on the  
Use another disc.  
Operating temperature 41°F to 95°F (5°C to 35°C)  
Operating humidity 5% to 90%  
record successfully.  
disc is insufficient.  
The source you are trying to record is You cannot record the source.  
copy-protected.  
Signal system PAL Colour  
When setting the recording channel, Select the channel on the DVD  
the channel is tuned on your TV’s  
tuner.  
Clock in DVD Recorder+VCR is not set Set clock to correct time. See ‘Set Clock‘  
to correct time.  
Timer has been programmed  
incorrectly.  
TIMER indicator light does not appear Reprogram Timer.  
after programming timer.  
TV is not Stereo-compatible.  
Broadcast program is not in stereo  
format.  
DVD Recorder+VCR A/V Out jacks are Make A/V connections. Stereo is available  
not connected to TV A/V In jacks.  
Recording  
Recorder+VCR’s built-in TV tuner.  
Recording formats DVD Video Recording, DVD-VIDEO  
Recordable discs DVD+R, DVD+RW  
Recordable time [DVD] Approx. 1 hour (HQ mode), 2 hours (SP mode), 4 hours (EP mode),  
6 hours (SLP mode)  
Timer Recording not  
possible.  
on page 23.  
Reprogram Timer. See ‘Timer Recording‘  
on page 47.  
[VCR] SP: 3 hours (E-180), LP: 6 hours (E-180)  
Video recording format  
Sampling frequency 27MHz  
Stereo Audio Record  
and/or Playback not  
present.  
No solution.  
No solution.  
Compression format MPEG 2  
Audio recording format  
Sampling frequency 48kHz  
Compression format MPEG1 Layer2  
only via A/V output from DVD  
Recorder+VCR.  
VCR Specifications  
DVD Recorder+VCR Audio/Video Out is Select AUX or A/V source as TV input.  
Head system 4 Head Video, 2 Head Hi-Fi helical scan azimuth system  
Timer 24-hour display type  
not selected for viewing at the TV.  
DVD Recorder+VCR’s TV audio  
channel is set to BIL or MONO.  
The remote control is not pointed at  
the remote sensor of the DVD  
Recorder+VCR.  
Set TV audio channel mode to Stereo.  
See ‘Changing the TV Audio Channel‘ on  
page 33.  
Point the remote control at the remote  
sensor of the DVD Recorder+VCR.  
Tape speed SP: 23.39 mm/sec, LP: 11.70 mm/sec  
Tape width 12.7 mm  
Rewind time less than 150 seconds (E-180)  
Antenna 75 ohms (VHF/UHF)  
Channel coverage VHF: 2-12, 13-20, 74-80 / UHF: 21-69 / CATV: 1-41  
Frequency range 20Hz to 20kHz  
Remote control does not The remote control is too far from the Operate the remote control within 23 ft  
work properly.  
DVD Recorder+VCR.  
There is an obstacle in the path of the Remove the obstacle.  
remote control and the DVD  
Recorder+VCR.  
(7m).  
Video S/N Over 43 dB (Standard recording)  
Audio S/N Over 65 dB (Hi-Fi), Over 40 dB (Mono)  
Resolution Over 240 lines (Standard recording)  
The batteries in the remote control are Replace the batteries.  
dead.  
DVD Specifications  
Laser system Semiconductor laser, wavelength 650 nm  
Frequency response DVD (PCM 48 kHz): 8 Hz to 22 kHz, CD: 8 Hz to 20 kHz  
Video S/N More than 60 dB  
DVD RESET : If the set is in malfunction, press [DVD/VCR] key on the front panel for 4 seconds. As this set is Digital  
Multimedia Product, malfunction may occurs.  
Audio S/N More than 90 dB  
Harmonic distortion Less than 0.01%  
Moisture Condensation  
Dynamic range More than 90 dB  
Resolution Over 500 lines (HQ Recording)  
Moisture condensation can occur:  
In locations where moisture condensation may occur:  
Inputs  
When the DVD Recorder+VCR is moved from a cold Keep the DVD Recorder+VCR plugged into an AC  
place to a warm place.  
Antenna In/Out U/V-mixed; 75 unbalanced  
Video In 1.0 Vp-p, unbalanced  
Audio In -8.8 dBm  
power outlet with the power on. This will help  
prevent condensation.  
DF-8100P/8150P only  
DV In 4 pin (i.LINK/IEEE 1394 standard)  
Under extremely humid conditions.  
When condensation has occurred, wait a few hours  
for the DVD Recorder+VCR to dry before using it.  
60  
61  
Technical Specifications  
Outputs  
Video output (DVD/VCR) Video output terminal, 1.0 Vp-p, unbalanced  
Video output (DVD) RGB output (75in load, R : 0.7Vp-p, G : 0.7Vp-p, B : 0.7Vp-p)  
Audio output (DVD/VCR) Audio output terminal (2 kinds), -5.8dBm (VCR), 2Vrms (DVD)  
Audio output (DVD) Analog audio output : 2.0Vrms, Digital audio output : coaxial  
S-Video output (Y) 1.0Vp-p, 75unbalanced, Mini DIN 4-pin x 1, C : 0.286Vp-p, 75Ω  
Design and specifications are subject to change without notice.  
Accessories  
RF cable .................................................. 1  
Scart cable .............................................. 1  
Blank DVD+RW disc ............................... 1  
Remote control ....................................... 1  
Batteries ................................................. 2  
Manufactured under license from Dolby Laboratories. ‘Dolby‘, ‘Pro Logic‘ and the double-D symbol are  
trademarks of Dolby Laboratories.  
DTS and DTS Digital Out are registered trademarks of Digital Theater Systems, Inc.  
62  

Hitachi C2059FS User Manual
Electrolux 922017 User Manual
Dell POWEREDGE 200 User Manual
Dell IN1720 User Manual
Compaq D 1H User Manual
Cobra Electronics C P 7 2 0 User Manual
Broil King POV 013 User Manual
AT T SL81108 User Manual
ARM Cortex r1p3 User Manual
Acer P223W User Manual