Daewoo DCR 9120 User Manual

◆ Region code of DVD/Video player for home is 2 or ALL. In inserting a

disc with other region code, it does not operate. Please only use a

disc with region code 2 or ALL.

DVD + VCR

HOME THEATER SYSTEM

◆

is a ‘Prohibition’ mark. If this mark is displayed in operating the

product, please wait for a while, then use it. If " Prohibition" mark

continues to be displayed in pressing a button after that, it means

the button does not function in the currently played disc.

◆ Press a product button on the remote control then use the product.

• DVD operation : [DVD] button

• Video operation : [VCR] button

• Radio operation : [FM/AM] button

DCR-9120

Owner’s Manual

Important Safeguards

This set has been designed and manufactured to assure

personal safety. Improper use can result in electric shock or

fire hazard. The safeguards incorporated in this unit will

protect you if you observe the following procedures for

installation, use and servicing. This unit is fully transistorized

and does not contain any parts that can be repaired by the

user.

openings must not be blocked by placing the unit on a

bed, sofa, rug, or other similar surface. This unit should

never be placed near or over a radiator or heat radiator.

This unit should not be placed in a built-in installation

such as a bookcase or rack unless proper ventilation is

provided or the manufacturer’s instructions have been

adhered to.

The lightning flash with arrowhead symbol, within an

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

equilateral triangle, is intended to alert the user to the

presence of uninsulated “dangerous voltage” within

the product’s enclosure that may be of sufficient

magnitude to constitute a risk of electric shock.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK). NO USER-

SERVICEABLE PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

10 Power Sources

The exclamation point within an equilateral triangle is

intended to alert the user to the presence of

important operating and servicing instructions in the

literature accompanying the appliance.

Read Instructions

This unit should be operated only from the type of power

source indicated on the marking label. If you are not sure

of the type of power supply to your home, consult your

dealer or local power company. For units intended to

operate from battery power, or other sources, refer to

the operating instructions.

All the safety and operating instructions should be read

before the unit is operated.

Retain Instructions

The safety and operating instructions should be retained

for future reference.

WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR

MOISTURE.

CAUTION : TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

11 grounding or Polarization

Heed Warnings

This unit is equipped with a polarized alternating -current

line plug (a plug having one blade wider than the other).

This plug will fit into the power outlet only one way. This

is a safety feature. If you are unable to insert the plug

fully into the outlet, try reversing the plug. If the plug still

fails to fit, contact your electrician to replace your

obsolete outlet.To prevent electric shock, do not use this

polarized plug with an extension cord, receptacle, or

other outlet unless the blades can be fully inserted

without blade exposure. If you need an extension cord,

use a polarized cord.

All warnings on the unit and in the operating instructions

should be adhered to.

IMPORTANT FOR LASER PRODUCTS

LASER

This Digital Video Disc Player employs a Laser System. To ensure proper use of this product please read this

owner’s manual carefully and retain for future reference. Should the unit require maintenance, contact an

authorized service location - see service procedure.

Follow Instructions

All operating and use instructions should be followed.

Cleaning

Use of control adjustments or the performance of procedures other than those specified may result in

hazardous radiation exposure.

To prevent direct exposure to the laser beam, do not try to open the enclosure. Visible laser radiation when

open and interlocks defeated.

Unplug this unit from the wall outlet before cleaning. Do

not use liquid cleaners or aerosol cleaners. Use a damp

cloth for cleaning.

DO NOT STARE INTO THE BEAM.

Attachments

DANGER Visible laser radiation when open and interlock failed or defeated.

Avoid direct exposure to beam.

CAUTION Do not open the top cover. There are no user serviceable parts inside the Unit;

Do not use attachments unless recommended by the

unit’s manufacturer as they may cause hazards.

12 Power-Cord Protection

CLASS 1

LASER PRODUCT

Power-supply cords should be routed so that they are not

likely to be walked on or pinched by items placed upon or

against them, paying particular attention to cords at

plugs, convenience receptacles, and the point where they

exit from the unit.

Water and Moisture

leave all servicing to qualified service personnel.

Do not use this unit near water- for example, near a

bath tub, wash bowl, kitchen sink or laundry tub, in a

wet basement, or near a swimming pool and the like.

CAUTION Any changes or modification in construction of this device which are not expressly approved by the party

responsible for compliance could void the user’s authority to operate the equipment.

13 Outdoor Antenna Grounding

Accessories

If an outside antenna or cable system is connected to the

product, be sure the antenna or cable system is

grounded so as to provide some protection against

voltage surges and built-up static charges. Section 810

of the National Electrical Code, ANSI/NFPA No. 70-1984

(Section 54 of Canadian Electrical Code, Part 1) provides

information with respect to proper grounding of the

mast and supporting structure, grounding of the lead-in

wire to an antenna-discharge unit, connection to

grounding electrodes, and requirements for the

grounding electrode. See example as shown.

Do not place this unit on an unstable cart, stand, tripod,

bracket, or table. The unit may fall, causing serious injury

to a child or adult as well as serious damage to the unit.

Use this unit only with a cart, stand, tripod, bracket, or

table recommended by the manufacturer.

• Make sure the unit is placed at least 8cm apart from other home appliances for the appliances to

get sufficient ventilation.

8A A unit and cart combination should be moved with care.

Quick stops, excessive force, and uneven surfaces may

cause the unit and cart combination to overturn.

• This unit shall not be exposed to dripping or splashing and no objects filled with liquids, such as

vases, shall be placed on this unit.

• Switching it off does not disconnect it from the mains (stand-by). To disconnect it from the mains,

you have to unplug it.

Ventilation

PORTABLE CART WARNING

(symbol provided by RETAC)

Slots and openings in

the case are provided for

ventilation to ensure

reliable operation of the

unit and to protect it

from overheating. These

14 Lightning

For added protection for this unit during a lightning

storm, or when it is left unattended and unused for long

periods of time, unplug it from the wall outlet and

disconnect the antenna or cable system. This will prevent

openings must not be blocked or covered. These

Important Safeguards

Advantages of This Product Are .....

damage to the unit due to lightning and power line

surges.

performance-this indicates a need for service.

22 Replacement Parts

• DVD, VCD, CD, CD-R(MP3), CD-RW, VHS playback

function

• Fast Forward / Reverse playback

• Search of title, chapter, and time in DVD disc,

and search of track and time in VCD and CD

15 Disc Tray

• Watching DVD for recording broadcast

• Integrated remote control (VCR, DVD)

• VISS function (VHS Index Search System)

• Multiplex sound playback/record

When replacement parts are required, have the service

technician verify that the replacements he uses have the

same safety characteristics as the original parts. Use of

replacements specified by the unit manufacturer can

prevent fire, electric shock, or other hazards.

Keep your fingers well clear of the disc as it is closing. It

may cause serious personal injury.

• Various TV aspect (DVD)

4:3 for Pan and Scan, 4:3 for Letter Box, and 16:9 for Wide

16 Overloading

• Repeat playback (title and chapter for DVD,

track and disc for VCD/CD)

Do not overload wall outlets of extension cords as this

can result in a risk of fire or electric shock.

23 Safety Check

• High Sound Quality of 6 head Hi-Fi (Hi-Fi Model

only)

• Repeat a defined period from A to B

(DVD/VCD/CD)

Upon completion of any service or repairs to this unit, ask

the service technician to perform safety checks

recommended by the manufacturer to determine that the

unit is in safe operating condition.

17 Object and Liquid Entry

• One Touch timer Recording (OTR)

Never push objects of any kind into this unit through

openings as they may touch dangerous voltage points or

“short-out” parts that could result in a fire or electric

shock. Never spill liquid of any kind on the unit.

• Selective Play (DVD/VCD/CD)

• MP3 file playback function (CD-R disc having

records of MP3 files)

You can select and play the desired title / chapter of DVD

and track of Video CD/CD in STOP mode.

24 Wall or Ceiling Mounting

• GUI (Graphical User Interface) OSD (On Screen

Display)

The product should be mounted to a wall or ceiling only

as recommended by the manufacturer.

18 BURDEN

• Various languages OSD (On Screen Display)

function (DVD)

Do not place a heavy object on or step on the product.

The object may fall, causing serious personal injury and

serious damage to the product.

By using the [DISPLAY] button on the remote control,

information on the DVD/VCD/CD player and disc, can be

displayed on the TV screen.

25 Heat

You can select and display OSD among various languages.

(English, French, Spanish, etc.)

The product should be situated away from heat sources

such as radiators, heat registers, stoves, or other products

(including amplifiers) that produce heat.

19 DISC

• Screensaver function (DVD)

• Parental Lock function (DVD)

Do not use a cracked, deformed or repaired disc. These

discs are easily broken and may cause serious personal

injury and product malfunction.

- Digital Amplification total output power 200 W

- 30W X 5 satellite speaker system plus 50W Subwoofer

This function can prevent playback of software that may

be unsuitable for children.

• Multi Audio function (DVD)

- Dolby Digital, Dolby Prologic, Dolby Prologic II, DTS

compatible

20 Servicing

The audio soundtrack can be heard in up to 9 languages.

In the case of SVCD or VCD, it depends on the disc. (The

number of audio languages depends on the software.)

Do not attempt to service this unit yourself as opening or

removing covers may expose you to dangerous voltage or

other hazards. Refer all servicing to qualified service

personnel.

• Various Sound Field effect (Movie, Music, PL

EMUL, Matrix, Classic, Hall, Theater)

• Multi Subtitle function (DVD)

• High bit / high sampling with 27MHz / 10bit

video encoder

The subtitle can be seen in up to 9 languages. In the case

of SVCD or VCD, it depends on the disc. (The number of

subtitle languages depends on the software.)

21 Damage Requiring Service

Unplug this unit from the wall outlet and refer servicing

to qualified service personnel under the following

conditions.

This unit has 27MHz / 10bit capability, that enables the

faithful reproduction of fine images.

• Multi Angle function (DVD)

• High bit / high sampling with 96KHz / 24bit

audio D/A converter

A. When the power-supply cord or plug is damaged.

This function allows you to choose the viewing angle of

scenes which were shot from a number of different angles.

(The number of angles depends on the software.)

B. If liquid has been spilled, or objects have fallen into

the unit.

With this 96KHz / 24bit linear Pulse Code Modulated

signals, which constitute the highest specifications in the

DVD standards, you can enjoy faithfully reproduced sound

in all of its various modes. To support 96KHz sampling /

24bit sound, the shaping noise of this multi-level digital

sigma type of D/A converter is kept flat up to 44KHz, thus

preventing the important audio signals from being

affected.

C. If the unit has been exposed to rain or water.

• Screen zoom function (DVD/VCD)

D. If the unit does not operate normally by following the

operating instructions. Adjust only those controls that

are covered by the operating instructions. Improper

adjustment of other controls may result in damage and

will often require extensive work by a qualified

technician to restore the unit to its normal operation.

• Digital FM/AM tuner with 50 station memories

This function allows you to listen the radio broadcasting of

FM or AM.

• RDS (Radio Data System) function

• Built-in Dolby Digital decoder (DVD)

• Slow Forward / Reverse (DVD) playback

Besides listening the radio, this set can receive the radio

channel that sends the letter data and display them on the

Display window. It calls RDS.

E. If the unit has been dropped or the cabinet has been

damaged.

F. When the unit exhibits

distinct change in

Read Carefully before Using

Identification of Controls

Front panel

Cautions in use of DVD-Video player are described below.

Checking and Replacement of Antenna______

Please read carefully before using a DVD-Video player.

• Antenna is subject to change in its direction or damage

by wind and rain. For clean screen, contact and consult

your nearest service center about checking and

replacement.

Installation place and handling_____________

• When you place this player near other devices, they may

affect poorly together.

In recording important screen______________

• When you place DVD-Video player and TV in the upper

and lower sides, it may cause flickering of pictures or

failure (tape is not ejected).

• Be sure to record the screen and check whether

recording is performed properly. Please understand

compensation of recording if recording is performed

using low quality tapes or videos.

• When you place this player near strong magnetic

materials, it may affect image or voice poorly or damage

recording.

& * (

)

2 3456 7 8 9 0

Copyright______________________________

• Do not use your recordings without permission of a

copyrighter except personal usage.

• Do not spill volatile liquids like insect spray over the

player. Do not leave rubber or plastic products in contact

with the player for a long time. They will cause

deterioration or paint peel-off.

Power (STANDBY/ON) button

Use to power the device on/off if AC power supply is

connected.

)

Record button

Record a programme from TV or other sources (except

DVD).

Tape and Disc Handling___________________

Place to insert videotape

Insert the desired tape.

Eject button

Use to eject the tape.

Disc tray

Open/Close Tray button

Open or close tray by pressing [OPEN/CLOSE] button.

Place a disc on the disc tray, label side up.

Operation Display Window

Display operation of device. For more information, see

“Operation Display Window” in the next page.

Not in use______________________________

• When the unit is not in use, be sure to remove the disc or

tape and turn off the power.

• Do not use any tape and disc below. Damage of video

head or cut/coiling of tape may cause failure.

- Tape with mold

- Tape or disc stained with juice or attachments

- Tape having breakage connection

- Disassembled tape

VHS/REC indicator

Illuminate in VCR mode.

DVD indicator

Illuminate in DVD mode.

VCR/INPUT button

Use to change into VCR or other output mode.

DVD button

Use to change into DVD mode.

FM/AM button

Use to change into RADIO mode.

PR & Preset – / +

Used to select the memorised TV broadcasting program

or radio stations.

• If you do not use the unit for a long period, remove

batteries in remote control to prevent leakage.

• In case you don’t use the unit for a long time, the unit

may not function properly in the future. Turn on and use

the player occasionally.

- Disc with severe scratch

• Moisture condensation may occur in tape. Moisture

condensation damages the tape. Please use the tape

after the moisture condensation is disappeared.

Video / Audio input jack

Moving________________________________

• Repack the unit as it was originally packed at the factory.

Alternatively, pack this product with towel not to be

damaged.

Connect a cable coming from the video/audio out jacks

of a camcorder, another VCR, or an audio visual source

here.

• After use, store tape vertically in a case to prevent loose.

• Do not store the following places.

- High temperature and humidity

- Subject generation of mold

- Subject to direct sunlight

(

Playback/PAUSE button

Playback videotape or disc. Press this button to pause a

screen.

• Eject any videotape.

- Much dirt or dust

- Near strong magnetic materials such as speaker

Cleaning_______________________________

Stop/MEMORY button

Use to stop playing a tape or disc. Use to memory radio

stations.

• Dust off dirt in cabinet or control panel part smoothly

with a soft cloth.

SOUND FIELD button

Use to adjust the Sound Fields.

Volume control

Change the loudness of the sound from the speakers

connected to the unit.

• For heavy dirt, soak the cloth in a weak detergent

solution, wring it well and wipe. Use a dry cloth to wipe

it out.

Tuning & Search –/+

Search- (œœ ): Use to rewind currently being played

videotape or disc; or to playback back rapidly.

• Follow instructions in using chemical cleaners.

Search+ (√√): Use to wind currently being played

videotape or disc; or to playback rapidly.

• Do not use any type of solvent such as gasoline or

benzene, as they may cause deterioration or paint peel-

off.

Headphone jack

Tuning –/+ : Scan all available radio stations.

Checking_______________________________

• Video is a high precision device. To obtain a clear screen,

we recommend regular inspection and maintenance

every 1,000 hours of use by technical engineers.

• For checking, contact your dealer or your nearest service

center.

Identification of Controls

Operation Display Window

Rear Panel

1 2 34 5 6

(

)

(

Multi angle indicator

DTS indicator

(

)

Speaker setup indicator

Title indicator

! Power Cord

DSP indicator

Memorized radio stations

Chapter indicator

It is a jack for supplying power to the unit.

Connect to outlet in a wall.

PBC (Playback Control) indicator

RDS indicator

@ Analog 5.1 Speaker Out Jack

Track indicator

Connect each of the speaker wires to the

satellite speakers.

FM Stereo indicator

Mute indicator

Sleep time indicator

Playback disc indicator

Dolby Digital indicator

Prologic II indicator

Playback indicator

Pause indicator

# Connection to Antenna Cable

$ AM Antenna Jack

% Woofer Out Jack

^ EURO AV2/ DECODER

& EURO AV1

Repeat playback indicator

Program indicator

* Connection to TV

( FM Antenna Jack

Remote Control

! STANDBY/ON button

@ DVD SELECT button

# VCR SELECT button

Instructions in using remote control

•

Operate remote control within 7m from the unit.

Do not press two buttons at the same time.

^[DVD]AUDIO LANGUAGE Select, ^[VCR]AUDIO Select button,

“

^[RADIO]Set FM Mode to Stereo or Mono sound

‘

^[DVD]SUBTITLE Select button

^[DVD]ZOOM button

^[VCR]Channel Up/Down button, ^[RADIO]Tune to the presetted

stations

Do not light up sending part of remote control.

Do not keep in the place with much dust and humidity.

^[VCR]TIMER RECORDING button, ^[DVD]PROGRAM button

( SETUP button

)

^{[DVD, VCR]}Use to highlight selections on a menu and adjust

certain settings ^{[RADIO, DVD, VCR]}Adjust the volume

^[DVD]TITLE /PBC button

^{[DVD, VCR]}NUMBER button , ^[VCR]TRACKING –/+ button

^[DVD]MARK button

^[DVD]REPEAT Playback button

^[DVD]REPEAT a defined period from A to B button

(

Accessories

)

Owner’s Manual/

Warranty

Remote Control

2 Batteries

RF cable

AM antenna

6 TV/VCR Select button

^{[DVD, VCR]}CLOCK/COUNTER button

^{[DVD, VCR]}FORWARD / REVERSE SEARCH button, ^[RADIO]Scan all

available radio stations

^[VCR]Record button

^[DVD]PREVIOUS (move into a previous chapter or track) / NEXT

(Move into a next chapter or track) button, ^[RADIO]RDS/PTY

button

FM antenna

Unpacking The Speakers

“ SOUND MUTE button

• one set of speakers including 1 set of left and right front

speakers, 1 centre speaker, 1 subwoofer and 1 set of left and

right rear speakers.

‘

^[DVD]OPEN/CLOSE button, ^[VCR]EJECT button

^[RADIO]FM/AM Select button

= VCR INPUT button

^[DVD]Chapter/Title/Time SEARCH button

Front Speakers

Subwoofer

Center Speaker

q SLEEP button

6 Speaker Cables:

W CLEAR button

w VOLUME CONTROL buttons

E SOUND FIELD button

^[DVD,VCR]OSD DISPLAY button

R ENTER (Confirm selections on a menu screen) button

^[DVD]MENU button

Rear Speakers

• 1 X green/black wire for center speaker

(Surround Sound)

•

1 X red/black wire for front right speaker

1 X white/black wire for front left speaker

Child Lock!!!

T SYSTEM select button (This button is not available for this set)

t Sound LEVEL button

Press the power [ ] button of the remote control

for about 8 seconds. No buttons of front panel can

• 1 X purple/black wire for subwoofer

• 1 X blue/black wire for rear left speaker

Y DELAY button

^[DVD]Slow Forward/ Reverse button, ^[VCR]Slow speed button,

be operated now and Lock indicator (“

”)

•

1 X gray/black wire for rear right speaker

^[DVD,VCR]Frame advance (step) in still mode

will be displayed on window display. To release

child lock, press any button of the remote control.

U PLAY/PAUSE button

•

To purchase accessories or parts not supplied, contact your nearest dealer or service center. But, owner’s

manual and warranty are not sold additionally.

u STOP/MEMORY button

^[DVD]ANGLE, ^[VCR]Record SPEED button

Setting up your player

Connecting your player through

◆ Before you start, unplug all the equipment from the mains supply.

extra equipment (satellite system)

◆ Before you start, unplug all the equipment from the mains supply.

(Option 1) - Connecting your player through RF lead

Television

(Option 1) - Connecting your player through RF lead

Television

200-240V~ AC

50/60Hz

Aerial

The type of aerial you should

use, depends on local

interference and how far you

are from the transmitter. You

should contact a local

retailer if you have any

questions about your aerial.

200-240V~ AC

50/60Hz

Aerial

Back view of your player

(Option 2) - Connecting your player through SCART lead

Television

200-240V~ AC

50/60Hz

Aerial

Satellite

You can use this connection if your player has two scart sockets. This will improve sound and picture quality when you are

recording from satellite.

Scart lead (not supplied)

Back view of your player

With this connection, if your player is receiving CH ARD and your TV is displaying CH3, when you press the [TV/VCR] button on

the remote control, your TV will automatically display the CH ARD. “VCR” will be displayed.

In this mode, to change the viewing channels the [PR/PRESET] buttons on the player remote need to be used. To switch off this

mode press [TV/VCR] on the remote control, TV remote can now be used as normal. You will get better pictures and sound

quality if you connect your player with a scart lead.

FM/AM Antenna connection

Speaker system connection

Connect the speakers using the supplied speaker cords by matching the colors of the terminals and those of the cords. To

obtain the best possible surround sound, adjust the speaker parameters (distance, level, etc.)

AM loop antenna

(supplied)

Front speaker

(right)

Rear speaker

(left surround)

Front speaker

(left)

FM wire antenna

(supplied)

Connect the supplied FM/AM antennas for listening to the radio.

• Connect the AM loop antenna to the AM antenna connector.

• Connector the FM wire antenna to the FM antenna connector.

•

To prevent noise pickup, keep the AM loop antenna away from the DVD Receiver and other component.

Be sure to fully extend the FM wire antenna.

After connecting the FM wire antenna, keep it as horizontal as possible.

If you feel lack of

bass frequency

Connect an active subwoofer to the

WOOFER OUT connector using a

monaural audio cord (not supplied).

When you connect an active

subwoofer, disconnect the woofer from

the WOOFER speaker connector.

Center speaker

Rear speaker

(right surround)

Subwoofer

•

Be sure to match the speaker cord to the appropriate terminal on the components: + to + and – to –. If the cords are reversed, the

sound will be distorted and will lack base.

•

If you use front speakers with low maximum input rating, adjust the volume carefully to avoid excessive output on the speakers.

Do not disassemble the front cover of supplied speaker.

Connecting with Other Equipment

◆ You can connect a wide variety of audio/video equipment to your DVD-Video, including : an additional VCR, Laser Disc

Player, DVD Player, Camcorder, Satellite Receiver, Video Game. Since all of these devices use essentially the same

connections, they will be described together.

Connection with Hi-Fi system

Connection with other video equipment

200-240V~ AC

50/60Hz

AUDIO INPUT

AUDIO

200-240V~ AC

50/60Hz

Connect Audio/Video Out

jack in other video

equipment to Audio/Video

In jack in rear panel (or

front panel) of DVD-Video

with connecting cable.

A/V OUTPUT

VIDEO

AUDIO

RF Cable

Connect “ANT. IN” jack in

TV to “RF.OUT” jack in

DVD-Video with RF cable.

Connect Audio jack. Connect AUDIO OUT in rear panel of DVD-Video to In jack of stereo sound unit.

For Input Select in stereo unit, Select “External Input” connected with DVD-Video.

Playback DVD disc or Hi-Fi videotape, you can hear sound in speaker of stereo unit.

To record contents of other

video equipment with

DVD-Video, insert

REAR-R

recording tape attached

recording tab in DVD-

Video.

How to Copy (Edit) Tape with Other Video Equipment

Turn on the unit.

Insert a recordable tape to the machine to record.

Press [INPUT] button to select the video equipment’s input is copied.

Check the video signal in other video equipment. If video in the other video equipment is correctly displayed on TV

screen, Press [REC] button in your player.

Press [PLAY/PAUSE] button in DVD-Video when unnecessary or undesired scene is displayed in recording.

(Caution) Recording is released automatically after 5 minutes since pressing [PLAY/PAUSE] button. Press [REC]

button if you want to record again.

Initial Installation

Setting time and date / Auto clock

◆ Switch the TV on.

◆ You can also start "AUTO SET" in the SETUP "PR PRESET"

◆ To tune in new stations (manual tuning) and to enter station names see page 23-24.

"AUTO SET".

Setting time and date

◆ Press [VCR] button on the remote control to change into VCR Mode and follow the procedure below.

Setting up the player

Call the player’s "SETUP",

choose "VCR SETUP", then "CLOCK SET".

CLOCK SET

TIME - - : - -

LANGUAGE SET

ENGLISH

DEUTSCH

ITALIANO

ESPAÑOL

FRANÇAIS

NEDERLANDS

You should see this picture the first time you switch on the TV and player.

DATE - - / - - /- - - -

Choose your language.

0-9:SETUP (HOUR)

œ/√:CORRECT SETUP:END

…/†:SELECT

OK:CONFIRM

SETUP:END

Then choose your country.

Move to the position you want to change and type in the new

values.

Wait a few seconds after typing a one-digit number.

COUNTRY SET

CLOCK SET

TIME 06:05

For selecting the country, refer to the followings.

B: Belgium

D: Germany

DK: Denmark

E: Spain

I: Italy

LUX: Luxembourg

N: Norway

NL: Netherlands

S: Sweden

SF: Finland

CH: Switzerland

TR: Turkey

DATE 08/06/2002(SUN)

Store with [OK] button and exit with [SETUP] button.

0-9:SETUP (HOUR)

LUX

OTHERS

œ/√:CORRECT

OK:CONFIRM

…/†:SELECT

OK:CONFIRM

SETUP:END

GR: Greece

OK for "AUTO SET!".

CH 25

Setting Auto clock

"AUTO SET" tunes in all the stations you can receive in your country and

sorts them in an order common for your country.

Clock is automatically set.

PLEASE WAIT...

◆ Auto Clock is only available for models with the VPS/PDC function (see page 50).

Some broadcasting stations may send the time and date along with the VPS/PDC data. The video will automatically use

this time and date during the initial setting up procedure during normal use, and every time you switch the video off at

the mains. If you find that this time and date is incorrect you can remove this feature by following the steps below

changing it to OFF mode, you will then have to manually set the time and date, see above.

SETUP:END

If other stations are positioned on near the current RF OUTPUT CH, the

guide message appears automatically.

RF OUTPUT SET

CURRENT

CH 52

The player recommends the optimal RF OUTPUT CH number automatically.

Press the [OK] button to confirm the recommended PR.

RECOMMENDED CH 54

VCR SETUP

CLOCK SET

LANGUAGE SET

RF OUTPUT SET

16:9 SET

OSD ON/OFF

AUTO CLOCK

0-9:SELECT(21-69)

OK:CONFIRM

SETUP:END

OFF

Should you wish the stations to have the same numbers as those used on the

TV, follow the instructions in "Sorting programme locations" on page 24.

…/†:SELECT

OK:CONFIRM

…/†:SELECT

OK:CONFIRM

SETUP:END

IMPORTANT!

SETUP:END

PLEASE CHANGE THE TV

CH TO 54.

Else ...

exit the basic installation function and enjoy your player.

MANUAL SET

PR01 ARD PR08 P-08

PR02 ZDF PR09 P-09

PR03 P-03 PR10 P-10

PR04 P-04 PR11 P-11

PR05 MTV PR12 ----

PR06 P-06 PR13 ----

PR07 P-07 PR14 ----

…/†:SELECT

•

If you don´t see this picture, because you don´t use a SCART cable, search this

picture now (CH 52) with the station tuning functions of your TV set (see its user

manual).

In case of interference problems on CH 52, type in an

other transmission channel between 21 and 69 using

the number buttons.

OK:CONFIRM

SETUP:END

OSD ON & OFF

Output Select

OSD (On Screen Display) ON & OFF

To Select DVD

Press [DVD] button.

This player is set to “OSD (On Screen Display) ON” mode before shipping and you can change it to OFF mode.

If DVD mode is correctly selected, DVD indicator on the front panel is lighted. Then, remote control button works as DVD

function. Press the [DVD] button, then the mode of DVD-Video Player becomes to the DVD OPERATION mode.

SETUP

Call the player’s "SETUP".

TIMER PROGRAM

PR PRESET

To Select VCR

VCR SETUP

TAPE CONTROL

Press [VCR] button.

…/†:SELECT

OK:CONFIRM

SETUP:END

If VCR mode is correctly selected, VHS indicator on the front panel is lighted. Then, remote control button works as VCR

function. Press the [VCR] button, then it becomes to the VCR OPERATION mode.

VCR SETUP

CLOCK SET

Choose “VCR SETUP”.

LANGUAGE SET

RF OUTPUT SET

16:9 SET

And press the [OK] button.

OSD ON/OFF

AUTO CLOCK

To Select Watch Modes or External Input

…/†:SELECT

OK:CONFIRM

SETUP:END

Press [INPUT] button.

Select “OSD ON/OFF”.

If you want OSD OFF mode, select it and press [OK] button to confirm.

Then OSD characters are not displayed in the normal picture.

Whenever you press [INPUT] button, BROADCASTING RECEPTION and EXTERNAL INPUT are selected in order.

OSD ON/OFF

OFF

…/†:SELECT

OK:CONFIRM

SETUP:END

To Select Radio

Press [FM/AM] button.

The character of Radio will be displayed on the blue back TV screen. Whenever you press [FM/AM] button, FM and AM

broadcasting are selected in order.

VCR Playback

Tuning in New Stations

◆ The TV and player are switched on.

Press [ ] button to power on.

◆ To see the picture from your player, press the station button on the TV reserved for player input or the AV

(Audio / Video) button.

◆ "AV1/2" should not be selected with the AV button on the player.

Press [VCR] button of remote control to change into VCR mode.

Insert the desired tape.

Tuning

If you want to playback it, press [PLAY/PAUSE] button.

PR PRESET

To complete the set-up of your video recorder when the auto set

AUTO SET

has not stored all of the channels or when you wish to store a new

MANUAL SET

When the operational status is flickering or poor, adjust it with [TRACKING +/–] button.

PR ERASE

PR ALIGN

channel.

Call the video’s "SETUP", choose "PR PRESET".

…/†:SELECT

OK:CONFIRM

SETUP:END

To stop it, press [ ] button.

For pause, press [PLAY/PAUSE] button in playback mode.

If you press this button once more, it starts playback again.

Select "MANUAL SET".

MANUAL SET

PR01 ARD PR08 P-08

PR02 ZDF PR09 P-09

PR03 P-03 PR10 P-10

PR04 P-04 PR11 P-11

PR05 MTV PR12 ----

PR06 P-06 PR13 ----

PR07 P-07 PR14 ----

Press [EJECT] button in the front part or [OPEN/CLOSE] button on

remote control to remove the tape.

…/†:SELECT

OK:CONFIRM

SETUP:END

Various Playback Methods

◆ If you want fast forward (or reverse) playback, press [√√] or [œœ ] button in

Choose any unused location number "----" or "P-xx" ...

MANUAL SET

RECEPTION

AERIAL

It's simplest to use the same location number on both the TV and

video.

AUTOSEARCH CH_ _

FINE TUNING

Playback mode. You can watch fast playing (rewinding) screen.

DECODER

NAME

_ _ _ _

◆ If you want Still picture, press [PLAY/PAUSE] in Playback mode. You can watch the

…/†: UP/DOWN

desired screen in pause status.

œ/√: SELECT

OK:CONFIRM

... and confirm.

SETUP:END

◆ If you want slow-motion playback, press [ ◆◆√] button in Playback mode. You can

watch the desired screen in the slow forward playback.

MANUAL SET

Set the station you want:

* NOTE: VCR doesn’t have Slow Reverse Playback function.

RECEPTION

AERIAL

•

the programme location number;

the broadcast system you want (Aerial(CH) or Cable(CC)),

You can directly enter the real channel number with the [0 to 9]

AUTOSEARCH CH 03

FINE TUNING

◆ If you want to watch a series of screens one by one (FRAME ADVANCE), press [◆◆√]

DECODER

NAME

_ _ _ _

button in Pause mode. Each time you press this button, the picture advances one frame.

…/†: UP/DOWN

œ/√: SELECT

OK:CONFIRM

buttons, or search by pressing [œ/√],

The fine tuning you can adjust,

When the program is encoded (and you have a decoder

If the product, which has

a auto-detector, detects

a contaminated head(s),

it shows the conditions

to notice the

SETUP:END

•

To Adjust Display

connected to socket EURO AV2), press the [

ON or OFF.

Change or create the station name.

√] to select

This product includes automatic Tracking function and enables users to enjoy clear picture without

an additional operation. Provided that the following problems can be solved by the manual

adjustment, which improves display quality. (During automatic display adjustment, “Adjusting

Display” are displayed on TV screen.)

contamination on

screen.

•

* In case of the notice

on screen, please rub

the heads with a head-

cleaner followed by

“How to use a head-

cleaner”.

MANUAL SET

Once you see the station you want, store it.

Tune in further stations (from step 3 onwards) or exit tuning mode.

- If the screen is poor in Playback mode,

RECEPTION

AERIAL

AUTOSEARCH CH_ _

FINE TUNING

- If noises occur in the upper or lower part of screen in slow playback mode,

DECODER

NAME

_ _ _ _

- If paused picture vibrates up and down.

…/†: UP/DOWN

0/1: CHANGE/CREATE

Use [TRACKING +/–] buttons of remote control to adjust the display suitable for watching.

OK:CONFIRM

SETUP:END

Tuning in New Stations

More Functions

◆ The counter counts in real time from the point you load the cassette. This does not have to be its beginning! The

counter does not count unrecorded parts of the tape.

Station names

◆ If you rewind beyond the zero position, the counter counts in negative values (e.g. – 0:01:15).

◆ If your player is showing no station name or is showing a station name incorrectly, you can correct this.

Clock / counter display

MANUAL SET

Call this menu (just see the previous page),

if it isn't displayed.

Each time you press [DISPLAY] button,

1x: Time and date+current status

RECEPTION

AERIAL

STOP SP

PR01 ARD

STEREO ON

AUTOSEARCH CH01

FINE TUNING

DECODER

NAME

Time and date

Select NAME position.

Press the [0] button to change the given name.

Or press the [1] button to create the station name.

_ _ _ _

2x: Counter+current status

3x: disappear.

counter

…/†: UP/DOWN

0/1: CHANGE/CREATE

OK:CONFIRM

SETUP:END

But if you press [CLK/CNT] button, clock and counter on display window will change

each other.

14:00 08/06

E180 00:48

MANUAL SET

Either select the name from the stored list or you create

the station name and enter a 4-digit name.

Change the letters with the […/†] buttons, move to the

next letter with the [œ/√] buttons.

RECEPTION

AERIAL

AUTOSEARCH CH_ _

FINE TUNING

•

If didn’t wind tape (PLAY, FF, REW,...), it doesn’t appear the tape remain time.

DECODER

NAME

•

In case that the timer recording information is inputted in the received broadcasting signal , press the button to display the

VPS/PDC icon.

_ _ _

…/†: SELECT CHARACTER

œ/√: SELECT POSITION

OK:CONFIRM

SETUP:END

MANUAL SET

PR01 ARD PR08 P-08

PR02 ZDF PR09 P-09

PR03 P-03 PR10 P-10

PR04 P-04 PR11 P-11

PR05 MTV PR12 ----

PR06 P-06 PR13 ----

PR07 P-07 PR14 ----

Remaining time and cassette length

Store and exit.

Call the player’s "SETUP", choose

"TAPE CONTROL"

• Remaining time display is only

possible when the cassette is

loaded.

TAPE CONTROL

TAPE REMAIN

GO TO ZERO

COUNTER RESET

INDEX+

E-180

E-240

E-300

…/†SELECT

OK:CONFIRM

SETUP:END

INDEX-

…/†:SELECT

OK:CONFIRM

…/†:SELECT

OK:CONFIRM

E-240 01:27

SETUP:END

Sorting programme locations

If the location numbers used for programmes stored in your TV and player are different, you can change them on the player. To do

this, move the stations to the right numbers, until they are arranged the way you want.

When you want the player to show the time remaining from the current player tape position (to find out if there is

sufficient space for a recording, for example).

To ensure the remaining time shown is accurate, select the length of cassette currently loaded by selecting this function

until you reach the correct length.

PR ALIGN

PR01ARD PR08 P-08

Call the player’s "SETUP",

choose "PR PRESET" then "PR ALIGN".

PR02 ZDF PR09 P-09

PR03 P-03 PR10 P-10

PR04 P-04 PR11 P-11

PR05 MTV PR12 ----

PR06 P-06 PR13 ----

PR07 P-07 PR14 ----

Searching a recorded program with index

Select the programme to swap.

…/†ALIGN

When you record a program, the VCR places an index mark at the start

œ :PR VIEW

OK:CONFIRM

TAPE CONTROL

Confirm by pressing OK button.

Move the station to the desired location number.

Confirm by pressing OK button.

SETUP:END

of the recording.

To search fo an index mark

1. Call the player’s "SETUP", choose "TAPE CONTROL"

2. Choose index + to search forward or index - to search backward.

TAPE REMAIN

GO TO ZERO

COUNTER RESET

INDEX+

INDEX-

…/†:SELECT

OK:CONFIRM

SETUP:END

The VCR will locate your index mark and begin playback.

Clearing programme locations

PR ERASE

PR01 ARD PR08 P-08

PR02 ZDF PR09 P-09

PR03 P-03 PR10 P-10

PR04 P-04 PR11 P-11

PR05 MTV PR12 ----

PR06 P-06 PR13 ----

PR07 P-07 PR14 ----

Call the player’s "SETUP",

choose "PR PRESET" then "PR ERASE".

Accessing counter zero position

REW SP

GO TO ZERO

Select the station (location number) you want to clear.

The player will wind to the position 0:00:00 and stop.

…/†:SELECT

œ :PR VIEW

OK:ERASE

Review the picture by pressing [

] button.

SETUP:END

0:02:13

Clear by pressing OK button.

More Functions

Resetting the counter to zero

Child lock

Reset the counter.

COUNTER RESET

Press the [ ] button for about 5 seconds.

No buttons of front panel can be operated now and LOCK INDICATOR (“LOCK”) will be

displayed on window display. Keep your remote control in a safe place.

To release child lock, press any button of the remote control.

0:00:00

Cassettes

16 : 9 Wide Screen Format Playing back / Recording

Use only good quality tape cassettes with the VHS logo.

•Keep cassettes away from excessive moisture or dust, magnetic and electrical fields (loud speakers

and computer monitors, for example).

•Always wind the tape to the beginning when you have finished. Store with the full spool at the

bottom and with the cassette in its cover.

PAL

VCR SETUP

You can play and record the program of 16:9 Wide-Screen format with this player .

CLOCK SET

LANGUAGE SET

RF OUTPUT SET

16:9 SET

OSD ON/OFF

AUTO CLOCK

• 16:9 Set

-Auto : This video automatically detects the program format (16:9 or 4:3) and records or plays

this program in the same format.

-ON : The video will play or record all broadcasts in 16:9 format. 4:3 broadcasts will be

converted to 16:9 format.

…/†:SELECT

OK:CONFIRM

You can protect your precious recordings from being wiped by breaking out the safety tab on the

side of the cassette (some cassettes have a slide). Should you wish to re-use the tape after

removing the tab, cover the hole with adhesive tape.

SETUP:END

-OFF : The video will play or record all broadcasts in 4:3 format only.

16:9 SET

•

If you watch a program which is recorded by 16:9 wide screen format with this player,

your TV must have 16:9 wide screen function and you have to connect TV and player with

the A/V scart.

AUTO

OFF

and ...

…/†:SELECT

OK:CONFIRM

SETUP:END

Dimmer : Your player dims its display when switched to stand-by mode.

Auto power off : Your player switches to stand-by when no tape is played and no station is received for more than

5 minutes.

AUTO REPEAT

If you press the [PLAY/PAUSE] button for 5secs during stop or still mode, it goes Auto repeat mode. This player plays

repeatedly the tape from the beginning to end parts.

To release this mode, press the [ ] button or mode operation button. (PLAY, FF, REW or STOP)

SETUP languages

LANGUAGE SET

Call the player’s "SETUP", choose

"VCR SETUP", then "LANGUAGE SET".

ENGLISH

DEUTSCH

ITALIANO

ESPAÑOL

FRANÇAIS

NEDERLANDS

Select your language.

Confirm.

…/†SELECT

OK:CONFIRM

SETUP:END

More Functions

The Hi-Fi system

Choice of sound output

During a stereo performance (playback-”Hi-Fi”/ broadcast -

“STEREO”):

PLAY

Hi-Fi

L+R

Your player machine is equipped with a high-quality Hi-Fi sound system.

HI-Fi

LEFT

Hi-Fi

RIGHT

This means you can enjoy

• films with excellent stereo sound

• films of full-length concerts in high quality stereo

Hi-Fi stereo

left audio channel only

right channel only

the normal mono sound track of a Hi-Fi cassette

Hi-Fi

OFF

• films with impressive Surround Sound using additional Surround equipment

• films with two dialogue modes (dual, bilingual), usually the original sound track and dubbed sound track

• VHS cassettes with Hi-Fi stereo sound and VHS cassette with normal sound

• During broadcasting a bilingual performance : Main language

STOP SP

PR10 EURO

BIL

(original sound track)

sub-language (dubbed)

OFF.

both

BIL

main language and sub-language

BIL

I+II

BIL

OFF

What you can listen to

STOP SP

PR10 EURO

STEREO ON

During Stop, the player displays what the current station is broadcasting. When you switch to

another station or the current station changes the sound mode, your player displays the

programme and sound mode on screen (if not, press AUDIO).

• “STEREO” = stereo

“BIL I / BIL II ”=bilingual

nothing= monaural sound

During Playback, the player displays what is recorded on the

cassette (if not, press AUDIO).

PLAY

Hi-Fi

L+R

• “Hi-Fi” = stereo/bilingual

nothing = monaural sound

Connections

DVD initial setting

LANGUAGE Setup

◆ If you are using a SCART cable, select the AV input on the TV to see the picture from the player.

◆ If you are not using a SCART cable, select the button number on the TV reserved for video input to see the

picture from the player.

◆ A user can set OSD language, Audio, Subtitle and Disc Menu.

While STOP or RESUME STOP, press

Language Display

Audio

Ratings

[SETUP] button.

To the TV via antenna cable (if you are not using a SCART cable)

Audio : Default

Subtitle : Default

DVD Menu : Default

OSD Language : English

If you are not using a SCART cable, your player can transmit pictures and sound to the TV via the coax aerial cable. Just tune

the TV to the player's transmitting channel (factory set to UHF CH 52). Tune the TV carefully to ensure the best pictures and

sound.

Once you have carried out the steps in "Connecting up the player" , switch on your

TV.

Language Display

Audio

Ratings

“OSD” means

Select “Audio” by pressing […/†]

button.

“On Screen Display”.

Audio : English

>Default

Press the [OK] button of the player’s remote control longer than 5 seconds to call

the player´s test picture.

Tune the TV to the test picture using the channel pre-set functions of your TV as

described in its manual.

When you have found the test picture, store it under the button number on your TV

for player input.

Press the [OK] button of the player’s remote control again longer than 5 seconds to

release the test picture.

English

Subtitle : English

Set it as the preferred audio language. In case the

audio language is set and recorded in the DISC, it is

automatically played in the set language in every

playing.

French

DVD Menu : English

Spanish

OSD Language : English

Czech

Dutch

German

Hungarian

Italian

Russian

Language Display

Audio

Ratings

Select “Subtitle” by pressing […/†]

button.

Audio : English

• If the quality of the test picture transmitted to the TV is poor due to interference

caused by a station transmitting on channel 52, you can tune the player to a

different transmitting channel. Find a free channel between 21 and 69 on your TV.

Call the player’s "SETUP" choose "VCR SETUP" then "RF

OUTPUT SET".

Subtitle : English

Subtitles Off

Please set it as the preferred language. In case the

subtitle language is set and recorded in the DISC, it is

automatically played in the set language in every

playing.

>Default

RF OUTPUT SET

DVD Menu : English

English

OSD Language : English

French

Spanish

Czech

Dutch

German

Hungarian

Italian

0-9:SELECT (21-69)

OK:CONFIRM SETUP:END

Type in the free channel.

Store and exit.

Russian

Select “DVD Menu” by pressing […/†]

button.

Language Display

Audio

Ratings

In case a disc does

not include setting

languages information,

the selected language

does not appear.

Audio : English

Subtitle : English

Please set it as the preferred DISC MENU language. In

case the DISC MENU language is set and recorded in

the DISC, it is automatically played in the set

language in every playing.

DVD Menu : English

>Default

•

If the quality of the test picture transmitted to the TV is poor, fine-tuning on the TV may help (refer to the

TV manual).

OSD Language : EnEgnlgislhish

French

Spanish

Czech

Without a scart cable, you will not get stereo sound from a TV capable of stereo sound.

Dutch

German

Hungarian

Italian

Russian

Select “OSD Language” by pressing

Language Display

Audio

Ratings

[…/†] button.

Audio : English

Subtitle : English

DVD Menu : English

Please select a language to be displayed on DVD

screen.

OSD Language

English

French

>English

Spanish

Czech

Dutch

German

Hungarian

Italian

Russian

DVD initial setting

DISPLAY Setup

AUDIO Setup

◆ A user can set up a connected TV condition and screen.

◆ A user may select audio menu according to a user’s speaker set.

While STOP or RESUME STOP, press

[SETUP] button.

While STOP or Resume STOP, press

[SETUP] button.

Language Display

Audio

Ratings

Language Display

Audio

Off

Ratings

Aspect Ratio : Letter Box (4:3)

Screen Saver : On

Dynamic Range

Speaker Setup

Configure

By pressing [œ / √] button, select “Display”.

Select “Aspect Ratio” by pressing […/†]

button.

Language Display

Aspect Ratio : Le

Audio

tt cr

Ratings

:3(16:9)

Select “Dynamic Range” by pressing

[…/†] button.

Language Display

Audio

Ratings

(

)

Off

Dynamic Range

>LetterBox (4:3)

Screen Saver : Off

>On

Press [ENTER] button to select the desired setting.

Speaker Setup

Configure

Pan & Scan (4:3)

You can set following 2 values of Dynamic Range.

•

Off : You can hear the same sound as recorded in

disc.

• If a user selects “Pan&Scan (4:3)”, the user can

watch only a center of the original scene of “16:9”.

•

On : You can hear loud sound softer and soft

sound louder.

• If a user selects “Letterbox (4:3)”, the user can

watch the original scene of “16:9”, but the top and bottom of the screen look black

color.

• If a disc size is originally recorded in 4:3, a user cannot watch it in a wide screen though

a user sets a size as “Widescreen 16:9”.

Select “Speaker Setup” by pressing

[…/†] button.

Language Display

Audio

Ratings

Select “Screen Saver” by pressing

[…/†] button.

Press [ENTER] button to select the desired setting.

Language Display

Audio

Ratings

Dynamic Range

Speaker Setup

Configure

Aspect Ratio : LetterBox (4:3)

Screen Saver : OfOfff

Press [ENTER] button to enter into Speaker Setup

screen.

>On

If bright scenes continue to be displayed in screen,

TV can be damaged. Set the screensaver to "On",

the screensaver functions automatically and DVD

logo moves continuously if the resume stop, stop,

pause, open status is maintained for about 5 minutes.

Speaker Setup

CENTER

After selecting “Speaker” by pressing

[…/†/œ/√] button, adjust the Level by

pressing [√√/œœ ] button and adjust

LEFT

RIGHT

Type: Small

Level: 0.0 dB

Delay: 0 ms

Type: Small

Level: 0.0 dB

Delay: 0 ms

Type: Small

Level: 0.0 dB

Delay: 0 ms

Speaker Setup : Default

Type: Small

Level: 0.0 dB

Delay: 5 ms

Type: On

Level: 0.0 dB

Type: Small

Level: 0.0 dB

Delay: 5 ms

R.SURR.

the Delay by pressing [◆œœ √√◆

]

L. SURR.

SUB. W

button.

Select:

…

†

√

Test Tone: √/◆◆◆

Delay: ◆œœ √√◆

Level: œœ √√

DVD initial setting

RATINGS Setup

While STOP or RESUME STOP, press

[SETUP] button.

To hear the test tone of speaker is set,

press [√ /◆◆◆] button.

Speaker Setup

Language Display

Audio

Ratings

LEFT

Type: Small

Level: 0.0 dB

Delay: 0 ms

CENTER

RIGHT

Type: Small

Level: 0.0 dB

Delay: 0 ms

Type: Small

Level: 0.0 dB

Delay: 0 ms

Password : Unassigned

PARENTAL : 8 ADULT

Default : Reset

Speaker Setup : Default

Type: Small

Level: 0.0 dB

Delay: 5 ms

L. SURR.

Type: On

Level: 0.0 dB

Type: Small

Level: 0.0 dB

Delay: 5 ms

R.SURR.

SUB. W

Select:

…

†

√

Test Tone: √/◆◆◆

Delay: ◆œœ √√◆

Level: œœ √√

The initial

password is 3308.

In case you forget newly-

input password, you can

use 3308 as a password.

Entering a NEW password.

Input password display appears.

Language Display

Audio

Ratings

Password : Unassigned

Enter NEW password:

Limits : 8 - No Limit

– – – –

Enter a user’s password by pressing 4 [Digit] buttons.

Select “SPEAKER SETUP: DEFAULT”

between CENTER and SUB. W in the

Speaker Setup menu and press [ENTER]

button.

Speaker Setup

CENTER

Type: Small

Level: 0.0 dB

Delay: 0 ms

LEFT

Type: Small

Level: 0.0 dB

Delay: 0 ms

RIGHT

Type: Small

Level: 0.0 dB

Delay: 0 ms

Speaker Setup : Default

> Default

Configuration 1

Type: Small

Level: 0.0 dB

Delay: 5 ms

L. SURR.

Type: On

Level: 0.0 dB

Type: Small

Configuration 2

Level: 0.0 dB

Configuration 3

Delay: 5 ms

SUB. W

R.SURR.

Test Tone: √/◆◆◆

Delay: ◆œœ √√◆

Select:

…

†

√

Level: œœ √√

“Parental Lock”

activates only if

Select “PARENTAL”by pressing […/†]

button.

Press [ENTER] button to select the desired setting.

Language Display

Audio

Ratings

Password : Unassigned

Enter password :

you set a password and

the unit goes into Lock

status. When the disc

has no parental function

even if the disc for adult

only, Parental Lock

Limits : 8 - No Limit

– – – –

Then input password to enter into ratings screen.

From Configuration 1 to 3 is

correspondent with the position of

speaker.

Speaker Setup

CENTER

Type: Small

Level: 0.0 dB

Delay: 0 ms

It consists of 8 levels of parental control, violence,

sexual scene, strong sexual scene and others to

protect children from watching those scenes.

LEFT

Type: Small

Level: 0.0 dB

Delay: 0 ms

RIGHT

Type: Small

Level: 0.0 dB

Delay: 0 ms

doesn’t activate.

Speaker Setup : Default

Type: Small

Level: 0.0 dB

Delay: 5 ms

L. SURR.

Type: On

Level: 0.0 dB

Type: Small

Level: 0.0 dB

Delay: 5 ms

R.SURR.

Select the proper configuration for your

speaker type.

Language Display

Audio

Ratings

SUB. W

Password : Unassigned

PARENTAL : 8 ADULT

Default : Reset

Select:

…

†

√

Test Tone: √/◆◆◆

Delay: ◆œœ √√◆

KIDS

Level: œœ √√

PG-13

PG-R

• In case of using the supplied speaker without another purchasing, you

will get better result if you select default mode.

NC-17

>8 ADULT

• In case of configuration 2 or 3, it is impossible to adjust the Level setting for the

Woofer (WF).

Select “Default”by pressing […/†]

Language Display

Audio

Ratings

button.

* Speaker type

Password : Unassigned

PARENTAL : 8 ADULT

Default : Reset

>Reset

Press [ENTER] button to select the desired setting.

• Small type : Speaker applied with high-pass filter. (supplied speaker)

• Large type : Speaker applied without high-pass filter.

* “Default : Reset” function is available to make

DVD setting go “Default”.

The provided speakers are “small” type. Under the condition of the “Large” type

speaker setup, the “small” speakers will be exposed to damage.

DVD Playback

Playing a desired scene

Press [ ] button to power on.

To skip scenes in a disc

DVD, VCD, CD, MP3

Press [DVD] button of remote control to change into DVD mode.

To move to next chapter (or track), press [NEXT √√◆ ] button.

The current chapter (or track) moves to the next chapter (or track).

Press [OPEN/CLOSE] button to open the disc tray.

Place a disc firmly on the disc tray, making its label look upward.

Insert the disc and press [OPEN/CLOSE] button to close the tray.

Press [◆ œœ PREV] button.

The disc tray is closed and after checking the disc’s condition, Playback or Stop function

starts to operate.

The current scene moves to the previous chapter (or track) or first scene of current

chapter (or track).

To playback it, press [PLAY/PAUSE] button.

•

In the case of DVD, DVD menus and titles are displayed on TV screen.

In the case of S-VCD and VCD2.0, the menus are displayed on TV screen and it is

converted into PBC (Playback Control) mode.

Directly moving to a desired title (DVD)

DVD, VCD

•

In the case of CD, VCD1.1 and MP3, the disc plays in order of its track numbers.

Track List

◆ Some movie discs may contain multiple titles. If the disc has a movie title menu recorded on it, the [TITLE] button can be

Track 001 (00:03:12)

Track 002 (00:03:54)

Track 003 (00:02:08)

Track 004 (00:03:16)

Track 005 (00:03:11)

Track 006 (00:04:48)

Track 007 (00:03:48)

Track 008 (00:03:02)

Track 009 (00:04:23)

Track 010 (00:04:14)

Track 011 (00:04:50)

Track 012 (00:03:30)

+000 /

+001 CD01

used to select the movie title. Details of operation may differ depending on the disc used.

002 A Track001.mp3

003 A Track002.mp3

004 A Track003.mp3

005 A Track004.mp3

006 A Track005.mp3

007 A Track006.mp3

008 A Track007.mp3

009 A Track008.mp3

* Selecting a title may not be available on certain DVD discs.

†

Use

arrows to find a track.

…

†

Press the [TITLE/PBC] or [MENU] button.

Press ENTER to start playing a track.

Track 001 . mp3

Use

arrows to find a track.

…

†

Press ENTER to start playing a track.

T : 001/015 00:02:05

A list of the titles on the disc is displayed.

T : 000/199 00:00:52

For the case of VCD disc, menu screen will appear

only when the disc has PBC function and PBC ON is

activated.

- CD -

- MP3 -

To stop it, press [ ] button once, the machine enters resume stop mode.

If you press [PLAY/PAUSE] button in resume stop mode, the machine begins playback at the

stop position.

Press the [ENTER] button or

[PLAY/PAUSE] button after pressing the

[…†œ √] button to select the desired

title.

Press [OPEN/CLOSE] button to remove the disc.

Various Playback Methods

◆ If you want fast forward (or reverse) playback, press [√√] or [œœ ] button in

Playback mode. You can watch fast forward (or reverse ) playing screen.

The selected title now

starts playing.

* This reverse playback can be unavailable for certain DVD. Unavailable for MP3.

◆ If you want slow forward (or reverse) playback, press [ ◆◆√] or [œ ◆◆] button in

Playback mode. You can watch the desired screen in the slow forward (or reverse)

playback.

* For the case of Video CD, this reverse slow playback function is unavailable. The

mark will appear.

◆ If you want still picture, press [PLAY/PAUSE] button in Playback mode. You can

watch the desired screen in Pause status.

Playing a desired scene

Book Mark

DVD

Playing a programmed order

VCD, CD

◆ Once memorising a scene, the user may watch it anytime.

While STOP, press [PROGRAM] button.

While the figure is appearing, please select desired track by pressing […/†] and [ENTER]

button.

To memorise a scene,

press [MARK] button while DVD playing. Then press

[ENTER] button to save a scene.

[ _ ] _

Program

Track 001 (00:03:12)

Track 002 (00:03:54)

Track 003 (00:02:08)

Track 004 (00:03:16)

Track 005 (00:03:11)

Track 006 (00:04:48)

Track 007 (00:03:48)

Track 008 (00:03:02)

Track 009 (00:04:23)

Track 010 (00:04:14)

Track 011 (00:04:50)

Track 012 (00:03:30)

Track 001 (00:03:12)

Track 002 (00:03:54)

Track 003 (00:02:08)

Track 004 (00:03:16)

Track 005 (00:03:11)

Track 006 (00:04:48)

Track 007 (00:03:48)

Track 008 (00:03:02)

Track 009 (00:04:23)

Track 010 (00:04:14)

Track 011 (00:04:50)

Track 012 (00:03:30)

* Moving cursor with [œ/√] button to select the saving

position, up to 5 scenes can be memorised.

†

Track 001

Play

To play a memorised scene,

Track 005

Track 010

Clear All

4 [ 5 ]

press [MARK] button.

Use … /

†

arrows to find a track.

Use

arrows to find a track.

…

†

Press ENTER to add/remove from program

Use arrows to select a button or list.

Press ENTER to add/remove from program

Use arrows to select a button or list.

√

Moving cursor with [œ/√] button to get the desired

scene and press [ENTER] button. Playback will start

from the memorised position.

After completing setting, press [PLAY/PAUSE] button.

Then, titles and chapters (track) are played in the above-programmed order.

To exit from Program Play mode, press the [PROGRAM] button once more in Program

menu screen.

To erase a memorised scene,

press [MARK] button.

Press [CLEAR] button on the bookmark number you

want to erase.

Repeating a defined period

DVD, VCD, CD

Press the [REPEAT] button in playback mode and select the repeat period

by using the […/†] buttons.

- DVD -

- CD -

◆

1/3:Off

1/4:Off

2/3:Track

3/3:Disc

2/4:Chapter

3/4:Title

4/4:Disc

•

Chapter : Current chapter will be repeatedly playback.

Title : Current title will be repeatedly playback.

Track : Current track will be repeatedly playback.

Disc : Current disc will be repeatedly playback.

Off : Repeat playback will be cancelled.

Playing a desired scene

Repeating a defined period from A to B

DVD, VCD, CD

Searching VCD and CD with a track number or time

VCD, CD

◆ You may repeat a defined period from A to B.

Press [SEARCH] button.

_ _0

01:46:03

It shows the track numbers and times.

At the point where you want to start

the repeat playback, press [A-B] button.

The right figure appears and repeat playback start

position (A) is set.

If you want to search with a track

number,

please enter the new track numebr to be searched

using the [NUMBER] or […/†] button.

At the point where you want to end the

repeat playback, press [A-B] button

again.

The repeat playback end position (B) is set and a

defined period from A to B is playback repeatedly.

If you want to search with a time,

please select the “Time window” with [œ/√]

buttons and enter the new time number to be

searched using the [NUMBER] buttons.

001

_ _:_ _:_0

A MP3 disc may

not be repeated from A

to B.

To exit from repeat playback mode, press [A-B] button.

It enters into Normal Playback mode.

In completing entering, please press [ENTER].

PLAY starts from the selected position.

Searching DVD with a title number, a chapter number or a time

DVD

Press [SEARCH] button.

It shows the title numbers, chapter numbers and

Quick Searching

VCD, CD, MP3

_ _0

019

01:46:03

times.

With NUMBER buttons, you can play the desired track.

If you want to search with a title

number,

please enter the new title number to be searched

Press the desired track number using number buttons, the selected track will be played back

with display of figure on the right upper screen .

using the [NUMBER] or […/†] buttons.

If you want to search with a chapter

001

_ _0

01:46:03

number,

please select the “Chapter window” with [œ/√]

buttons and enter the new chapter number to be

searched using the [NUMBER] or […/†] buttons.

If you want to search with a time,

001

019

_ _:_ _:_0

please select the “Time window” with [œ/√]

buttons and enter the new time number to be

searched using the [NUMBER] buttons.

In completing entering, please press [ENTER] button.

PLAY starts from the selected position.

Confirming the current PLAY mode on screen

Confirming the current DVD disc mode

Confirming the current MP3 disc mode

MP3

DVD

001

020

01:46:03

While in playing, press [DISPLAY]

button.

It shows the current title, current chapter and time

elapsed.

Track List

Display screen appears automatically in

Playback mode.

+000 /

+001 CD01

002 A Track001.mp3

003 A Track002.mp3

004 A Track003.mp3

005 A Track004.mp3

006 A Track005.mp3

007 A Track006.mp3

008 A Track007.mp3

009 A Track008.mp3

It shows the MP3 File information in disc, the directory, MP3

File name and directory list.

†

Use

arrows to find a track.

…

†

Press ENTER to start playing a track.

Track 001 . mp3

With […†] buttons, you can move the cursor to MP3 Music

File. To playback MP3 File, press [ENTER] button.

T : 000/199 00:00:52

1/4:Dolby Digital, 5.1Ch. -English

Press [DISPLAY] button again.

It shows the audio selected.

1/4:Subtitles Off

2/4:Chapter

Press [DISPLAY] button again.

It shows the subtitle selected and repeat playback

mode .

To exit from Display mode, press [DISPLAY] button

again.

Confirming the current VCD, CD disc mode

VCD, CD

While in playing, press [DISPLAY] button.

001

00:49:29

1/3:Stereo

It shows the current track, audio selected, repeat playback

mode and time elapsed.

To exit from Display mode, press [DISPLAY] button again.

1/2:Normal

1/3:Off

PBC PBC On

AUDIO, SUBTITLE language and SOUND FIELDS

ZOOM, Multi Angle

◆ The user may select an audio language and subtitle language if a disc includes Multi-language.

Using a zoom function

DVD, VCD, VCD2.0

◆ The user can enlarge the current screen about 2, 4 or 8 times.

Selecting an audio language

DVD

While playback or still mode, press [ZOOM]

button till the right figure appears.

Every time the user presses [ZOOM] button, a zoom

magnification changes 2 times (X2) ◆ 4 times (X4) ◆ 8

times (X8) ◆ OFF ◆ 2 times (X2) ... one by one.

Press [AUDIO] button. It shows the audio

information DVD disc includes.

The user can select each audio information by using […†]

buttons. In completing selecting, please press [AUDIO] button

1/4:Dolby Digital, 5.1Ch. -English

A certain disc may

not support audio select

or subtitle select.

one more.

A base point to be enlarged is center and the point can be

changed with the operation of […†œ √] button.

Selecting a subtitle language

DVD

Press [SUBTITLE] button. It shows the subtitle

1/4:Subtitles Off

information DVD disc includes.

The user can select each subtitle information by using […†]

buttons. In completing selecting, please press [SUBTITLE]

button one more.

Different Angle

DVD

◆ If a disc includes multi angle information, the user can watch a screen in multi angles. The function is limited to a DVD disc

supporting multi angle information.

Selecting Sound Fields

DVD, VCD, CD

Press [ANGLE] button. It shows multi angle

1/1:Not available

information DVD disc includes.

The user can select each angle information by using […†]

buttons. In completing selecting, please press [ANGLE]

button one more.

Each time you press [SOUND FIELD] button in playback mode, sound fields

can be set as below.

DVD mode

DVD (only for 2CH) : OFF ◆ MOVIE ◆ MUSIC ◆◆PL EMUL ◆ MATRIX ◆ OFF.

VCD, CD, MP3 : OFF ◆ MOVIE ◆ MUSIC ◆◆PL EMUL ◆ MATRIX◆ CLASSIC◆ HALL◆

THEATER◆ OFF.

This function is not available to a DVD disc supporting 5.1 Audio channel & DTS.

This function may be unavailable to some VCD or CD.

VCR mode

OFF ◆ MOVIE ◆ MUSIC ◆◆PL EMUL ◆ MATRIX ◆ CLASSIC ◆ HALL ◆ THEATER ◆ OFF..

RADIO mode

OFF ◆ MOVIE ◆ MUSIC ◆◆PL EMUL ◆ MATRIX ◆ CLASSIC ◆ HALL ◆ THEATER ◆ OFF..

About MP3 discs

Displaying menus in a disc

Playing a disc containing MP3 files

To display menus in a disc

MP3

DVD, VCD2.0

This unit will play MP3 files recorded on CD-R and CD-RW discs.

◆ If a disc includes menus, the user may use them.

Turn on your television and select the program assigned to this DVD player.

Press [TITLE/PBC] or [MENU] button.

•

It shows menus in the disc. Also they are different according to discs.

Press the DVD open [OPEN/CLOSE] button, the disc tray opens.

If it is a VCD2.0, select PBC ON mode by pressing [TITLE/PBC] button.

* CD and VCD1.1 do not support the function.

Put a disc containing MP3 files on the disc tray with the label side up.

Press the DVD open [OPEN/CLOSE] button, the disc tray closes.

The unit will take a short while to load the disc and display the directory structure.

Move a cursor to a relative item with arrow buttons of […†œ √] button

and select one with [ENTER] button or [PLAY] button.

Press the […†] navigation buttons of the remote control to select the file you want to listen

to, then press the [ENTER] button and this selected file is located and played back.

◆ Play and Pause

Press the [PLAY/PAUSE] button to switch between play and pause.

√√] button in playback mode.

To watch JPEG file

* If you want to 2 times playback, press the [

◆ To stop playback

◆ This unit will play JPEG files recorded on CD-R and CD-RW discs.

Press the [STOP ] button.

◆ To skip to the next or previous file

To watch the desired file, move a cursor to a relative item with arrow buttons of

…†œ √] button and select one with [ENTER] button.

•

Press the [NEXT √√◆ ] button of the remote control briefly while playing, to skip ahead to the

beginning of the next file. Each time you press the button consecutively, the beginning of the

next file is located and played back.

[

Progressive JPEG files do not support the function. It is displayed “Unsupported Format”.

•

It shows the next file for a few seconds in order. If you want to stop the playing file, press

[PLAY/PAUSE] button.

•

Press the [◆ œœ PREV] button of the remote control briefly while playing, to skip back to the

beginning of the previous file. Each time you press the button consecutively, the beginning of

the previous file is located and played back.

If you press [STOP ] during playback, all JPEG files of disc will be listed of thumbnail

format. To watch the desired file, move a cursor with arrow buttons of

select one with [ENTER] button.

[…†œ √

]

button and

The ability of this unit to read MP3 discs is dependent on the followings:

•

The Bit Rate must be within 64-256 kbps.

The maximum number of directories should not exceed 32.

The maximum depth level of directories should not exceed 4.

In case that the file is recorded with the variable bit rate (VBR) in one file (Example: 54-256kbps) the

sound breaking may occur during the playback.

•

File names should be named using 8 or fewer letters and/or numbers, and must incorporate the

“MP3” file extension. EXAMPLE:

. MP3 where each is a letter or number.

********

Use only letters and/ or numbers in file names. If you use special characters, the file and/ or folder

names may not be displayed correctly on the on-screen display.

Caution

•

Try to avoid the use the CD-RW(Rewritable) disc if possible because it can not be played back

according to the recording format.

•

The CD-R must be recorded with the standard format because it can not be played back according to

the recording format.

•

The CD-R should be written using the ‘disc at once’ method.

The disc which is made with ISO 9660 format can be played back.

Recording

To Record With VCR

To Record From DVD To Videotape during DVD playback

Press [DVD] button of remote control to change into DVD mode.

Insert the desired DVD disc.

Press [ ] button to power on.

• Press [VCR] button of remote control to change into VCR mode.

When it is a DVD disc with copy protect function, you can’t copy it.

Insert a recordable tape.

Insert a tape with recording tab.

Play the DVD disc and press [REC] button.

DVD plays and VCR starts recording.

To exit copy, press [ ] button.

Also it stops automatically when DVD playback is finished or recorded tape is reached to the

end.

Wit h [PR/PRESET], [NUMBER] and [INPUT] but t ons, select t he desired

broadcasting channel or external input unit to record.

* When the disc sets DTS 5.1Ch in audio mode, you can’t copy it.

If you want to copy it, set audio mode to Dolby Digital 5.1Ch or Dolby Digital 2Ch.

Select the desired speed (SP or LP) with [SPEED] button.

This product incorporates copyright protection technology that is protected by method claims of certain U.S patents and

other intellectual property rights owned by Macrovision Corporation and other rights owners.

Press [REC] button.

Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and

other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or

disassembly is prohibited.

Then, it starts recording.

If you want to pause recording, press [PLAY/PAUSE] button.

After pressing [PLAY/PAUSE] button, if the pause status continues for five minutes, the

recording is released automatically.

One Touch timer Recording (OTR)

◆ When your urgent business happens suddenly in watching TV or you want to record the current TV program for the

To exit recording, press [ ] (STOP) button.

desired time, follow the procedures below.

First, follow the steps 1 to 4 in “Recording With VCR”.

Press [REC] button as much as you want. See the “Recording Times Table” below.

Once .............. continuous recording until you press STOP button

Twice ............. recording for 30 mins from current time

3 (times)......... recording for 1 hour

To Enjoy Another TV Channel or DVD during recording

If you want to watch another TV channel during recording with video, press [TV/VCR]

button.

9 .................... recording for 4 hours

22 .................. returning to the status of Once Press

It is available of changing into and watching another TV channel by pressing TV [PR/PRESET]

buttons.

To stop Recording mode, press [ ] (STOP) button more than 5 seconds.

If you want to playback DVD during recording with video, insert a DVD disc.

Place the desired DVD disc on DVD tray, press [DVD] button to convert OUTPUT into DVD

mode and press [PLAY/PAUSE] button. Then, you can watch DVD.

Timer Recordings

NORMAL TIMER RECORDING

TIMER RECORDINGS USING ShowView

◆ For timer recordings, clock, date, and stations must be set correctly.

◆ Load a cassette with its safety tab in place and with sufficient free space for the recording.

Call the ShowView menu by pressing PROGRAM on the

remote control.

HOW OFTEN DO YOU WANT

TO RECORD THIS PROGRAM?

ONCE

WEEKLY(ONCE A WEEK)

DAILY(MON-FRI)

DAILY(MON-SAT)

DAILY(MON-SUN)

Call the player’s "SETUP", choose "TIMER PROGRAM".

Decide if you want to record "ONCE", "WEEKLY" or "DAILY"...

... and confirm.

SHOWVIEW

83077----

From your TV magazine, type in the number next to the programme you

want to record ...

0-9:SHOWVIEW NUMBER

œ :CORRECT

OK:CONFIRM

…/†:SELECT

OK:CONFIRM

... and confirm.

SETUP:END

Decide if you want to record "ONCE", "WEEKLY" or "DAILY"...

... and confirm.

HOW OFTEN DO YOU WANT

TO RECORD THIS PROGRAM?

Type in one after the other:

ONCE

WEEKLY(ONCE A WEEK)

DAILY(MON-FRI)

DAILY(MON-SAT)

DAILY(MON-SUN)

TIMER PROGRAM (ONCE)

•

The programme location number;

the time the broadcast starts,

the time the broadcast ends,

the day of the broadcast, if it is not today.

Select LP if you wish to make a very long recording .

Switch off VPS/PDC here if you need to .

START TIME

--:--

--/--

END TIME

START DATE

TAPE SPEED

VPS/PDC

…/†:SELECT

OK:CONFIRM

SETUP:END

…/†:SELECT(AV1/AV2)

0-9 :SETUP(PR)

œ/√:CORRECT SETUP:END

If you wish to make changes:

TIMER PROGRAM (ONCE)

Move to the position you want to change using the [œ/√] buttons.

Change the setting using the […/†] or [number] buttons. If all setting

are ok, press [ok], till you see “OK: CONFIRM” in the bottom line.

Confirm.

START TIME

END TIME

START DATE

TAPE SPEED

VPS/PDC

…/†:SELECT (AV1/AV2)

0-9 : SETUP (PR)

21:20

22:20

14/06(SAT)

If you wish to make changes:

Move to the position you want to change using the [œ/√] buttons.

Change the setting using the […/†] or [number] buttons.

TIMER PROGRAM (ONCE)

START TIME

END TIME

START DATE

TAPE SPEED

VPS/PDC

18:10

20:30

20/06(FRI)

œ/√:CORRECT

OK:CONFIRM

SETUP:END

Switch your player off.

If all setting are ok, press [

√], till you see “OK : CONFIRM” in

…/†:SELECT(AV1/AV2)

0-9 : SETUP (PR)

œ/√:CORRECT

OK:CONFIRM

the bottom line.

Confirm.

SETUP:END

Switch your player off.

•

VPS/PDC is a service provided by some stations to enable you to perform timer recordings precisely even if

the broadcaster delays the start time of the programme slightly. The time you enter is the VPS/PDC time so

must be correct. Not all stations offer VPS/PDC, in which case the player will start at the time you enter and

not the actual start time of the programme.

If you wish to start recording at a specific time without it being adjusted by the VPS/PDC system in the

event of a delay, switch VPS/PDC off otherwise the player will not record.

If you don’t have the ShowView numbers see next page for the normal timer.

•

Wait a few seconds after typing a one-digit-number.

If you have made a mistake, move to the position you want to change using the [œ/√] buttons and

•

change the setting.

If you have made a mistake, move back to the relevant position with the [œ] button and change the setting.

If there is no programme location displayed under “PR” in the change menu, the player doesn’t yet know

the location number for the programme you want. Type it in and this will be stored for last recordings.

If you wish to record from a satellite receiver, select under “PR” the satellite programme location or AV (1/2)

(depending on the connection with the antenna cable or the SCART-cable). Leave the satellite tuner

switched on and to the programme you want.

•

If programme timings overlap, the machine will give a warning message. If you don’t adjust the times, the

machine will record the first programme completely then continue with the second one.

•

If there is no sufficient free space for the recording on the cassette the video switches automatically to

“LP” for double recording capacity.

The recorder will eject cassettes which have the safety tab removed.

•

Should programming overlap, you get a warning.

To cancel the recording press the

button (stop) more than 5 seconds.

ShowView is a trademark applied for by Gemstar Development Corp.. The ShowView system is

manufactured under license from Gemstar Development Corporation.

Timer Recordings

Copying and Assembling

TIMER REVIEW - CHANGING AND ERASING

COPYING

◆ Switch off all components when connecting or disconnecting cables.

TIMER PROGRAM

Call the player’s "SETUP",

choose "TIMER PROGRAM".

PR START END DATE

21:20 22:20 14/06

18:10 20:30 20/06

-- : -- -- : -- -- / --

To copy to your player from another video machine,

connect the two machines with a cable between their

EURO AV (SCART) sockets and select as programme

"AV 1/AV 2" or “F. AV” (front sockets) using the

[PR/PRESET] or [INPUT] button.

Set the other video machine to playback and your

machine to record.

Other VCR

Decoder for Pay-TV

Camcorder

Video Player

Satellite Receiver

…/†:SELECT

OK:CONFIRM

SETUP:END

Audio Amp.

devices

TIMER PROGRAM (ONCE)

Select the programming to change or erase.

If you want to erase this programming press button [0].

•To connect a mono audio source, use the front Audio In

socket marked L.

START TIME

END TIME

START DATE

TAPE SPEED

VPS/PDC

21:20

22:20

14/06(SAT)

If you wish to make changes:

Move to the position you want to change using the

To copy to another video machine from your player,

connect the two machines by means of their EURO AV

(SCART) sockets.

0 :ERASE

œ/√:CORRECT SETUP:END

[œ/√] buttons.

On the other video, select its AV input and set the

machine to record.

Change the settings using the […/†] or [number]

buttons.

Switch your player to play back at the position you want

copying to start.

If all settings are ok, press [

CONFIRM" in the bottom line.

Confirm changes with [OK]. Exit the menus.

√], until you see "OK:

(other VCR)

* In case the unit operates in VCR or Radio mode, the timer recording function

can not be performed.

ASSEMBLING

Should you wish to assemble your own film, from camcorder footage for example, use the assembly technique for smooth edit

points:

•

Move the tape to the position at which the new scene is to be added using the play functions.

Wind back slightly before the edit point and put the machine into pause using the [PLAY/PAUSE]

button (do not press STOP!).

•

Now go directly into record.

For the best results, the source cassette from which you are recording should already be playing back

when you start recording.

Presetting the radio stations

Listening to the radio

◆ You can preset 50 stations for FM and AM. Before tuning, make sure that you have turned down the volume to the

◆ Preset radio stations in the DVD receiver’s memory first (see “Presetting radio stations” on the previous page).

minimum.

Press [FM/AM] button until the FM or AM appears in the display window.

Press [FM/AM] button until AM or FM appears in the display window.

And then every time you press [FM/AM] button, FM and AM changes alternately.

The last received station is tuned in.

Press and hold [TUNING –/+] button for about two seconds until the

frequency indication starts to change, then release.

Press [PR/PRESET] button repeatedly to select the preset station you

want.

Scanning stops when the DVD Receiver tunes in a station.

Each time you press the button, the DVD receiver tunes in one preset station at a time.

Press [MEMORY] button.

Adjust the volume by rotating VOLUME on the front panel or pressing

[VOL-] or [VOL +] button repeatedly.

A preset number will display in the display window.

Press [PRESET –/+] button to select the preset number you want.

When listening the FM radio broadcasting, each time you press [AUDIO]

button, STEREO and MONO changes alternately.

Press [MEMORY] button again.

The station is stored.

To turn off the radio

Press POWER to turn the unit off or select another function mode (DVD, VCR, VIDEO 1 or VIDEO 2).

To listen to non-preset radio stations

To tune in a station with a weak signal

•

Use manual or automatic tuning in step 2.

Press [TUNING –/+] button repeatedly in step 2 to tune in the station manually.

For manual tuning, press [TUNING] button repeatedly.

For automatic tuning, press and hold [TUNING] button for about two seconds.

To clear all the memorized stations

Press and hold [MEMORY] button for about three seconds and “CLEAR ALL” appears in the display

window and then press [MEMORY] button again, the stations are cleared.

RDS (Radio Data System) function

Speaker Setup for enjoying the surround sound effect

Surround Sound Audio Components

◆ RDS (Radio Data System)

DTS Digital Surround, Dolby Digital and Dolby Pro Logic technologies can be used to enjoy 3-dimensional sound effects with

video image. We recommend you use the following devices.

RDS means Radio Data System, a feature that allows you to receive the radio channel that sends the letter data, for

example Weather, News, Affairs, Sports... etc.,. This unit can receive the RDS signal with the help of a FM/AM tuner and

display the letter data on the display window.

•

Hi-Fi Stereo VCR to play the program sources.

Large screen TV monitor for a high-quality video image.

Use the program sources (e.g. LD, DVD, VIDEO TAPE etc.) labeled with DTS Digital Surround (or) Dolby Digital Surround

( or ) Dolby Pro Logic Surround.

To receive the RDS signal

1. Press [FM/AM] button until the FM or AM appears on the display window.

2. Press and hold [TUNING -/+] button for about two seconds until RDS signal is received.

(When the RDS signal is received, RDS turns red on the display window.)

Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic”, and the double-D symbol are trademarks of

Manufactured under license from Digital Theater Systems, Inc. US Pat. No. 5,451,942 and other worldwide patents issued

3. Each time you press RDS [◆œœ ] button, the exist frequency of RDS broadcasting and PS name PTY (only there is a PS

name) are displayed alternatively.

* PS name (Program Service Name): It is a name of broadcasting station’s own.

* PTY (Program Type Code): The classified code of the received broadcasting (None, News, Affairs, Info, Sport, Educate,

Drama, Culture, Science, Varied, POP M, ROCK M, Easy M, Light M, Classics, Other M, Weather,

Finance, Children, Social, Religion, Phone In, Travel, Leisure, Jazz, Country, Nation M, Oldies,

Fork M, Document, TEST, Alarm!)

Room features affecting sound

If the room is made of concrete and hard materials like wood walls, you will not hear the ultimate surround effects. The walls

of the room must have the appropriate absorption factor and be able to "reflect" the sound for the proper effect. If the room

has too much sound reflection, try repositioning the furniture. You may also need to hang curtains etc. to absorb more of the

sound - experiment with the room’s acoustics.

To search the RDS broadcasting using PTY button

1. Press PTY [√√◆ ] button and press [PR/PRESET] button to select the desired program type code.

2. When press PTY [√√◆ ] button, the unit searches the corresponding RDS broadcasting with the selected program.

Speaker Setup for enjoying the surround sound effect

Delay Time Setting

Speaker Positioning

A typical speaker setup uses 6 speakers: 2 front speakers, a center speaker, 2 rear speakers, and a subwoofer. Add a sub-

woofer to hear excellent bass sound, DTS digital surround or Dolby Digital surround. Set up a listening position; a couch or

chairs, etc. as shown in the speaker positioning example.

◆ In Dolby Digital or Dolby Pro Logic mode it is assumed that the time it takes the sound from each speaker to reach the

listener, is the same. But if the time interval from the center or rear left and right speakers to the listener is closer than the

time interval from the listener to the front left and right speaker, the sound of center or rear left and right speaker will

reach the listener first; instead of the sound of the front speakers. (It is desirable that the sound from the front speakers

reach the listener first.)

•

Front speakers

We recommend that the height of the tweeters of the front speakers be at the same height as the listener’s ears, to the

left and right of the TV. See speaker positioning example for speaker placement.

Dolby Digital and Dolby Pro Logic modes provide speaker time delay adjustments to resolve this problem:; you can

manually set the delay time of the center or rear left and right speakers so that the sound from all speakers will arrive

simultaneously to the listener.

Center speaker

Ideally, the center speaker and front speakers would be positioned at the same height. Place the center speaker above or

below the television.

Rear speakers (Surround)

Place left and right surround speakers behind the listening area. These speakers help recreate sound motion and

atmosphere; required for surround playback. For optimum sound effects, do not place the rear speakers too far behind the

listening position. Install them at or above the height of the listener’s ears. It is also effective to point the rear speakers

toward a wall or ceiling, to further dis-

Delay Time Setting

Front Speaker

(Right)

Center Speaker

Front Speaker

(Left)

perse the sound.

1. Center delay time setting

If the room is small and the listeners area is

near the rear wall, set the rear speakers

opposite each other about 2 - 3 feet higher

than the listeners’ ears.

Ideal Front Speaker

If the distance of Dc is equal to or longer than the Df in the figure, set the mode to

0ms. Otherwise, change the setting according to the table below.

(A) = Df - Dc

•

Subwoofer

2. Surround delay time setting

Place it an appropriate position. (See

speaker positioning example.)

Surround

Speaker (Right)

If the distance of Df is equal to the Ds in the figure, set the mode to 0ms.

Otherwise, change the setting according to the table below.

(B) = Df - Ds

Surround

Speaker (Left)

3. Front delay time setting

Speaker Positioning Example

If the distance of Ds or Dc is longer than the Df in the figure, change the setting

Ideal Surround Speaker

according to the table below.

Dc - Df

Notes

Ex) If the distance from front speakers to the listener is 3m and from rear speakers from the listener is 3.64m, Delay time of

the Front Speaker is 3.64m(Ds) - 3m(Df) = 0.64m (C), 0.64m (C)/0.34m=2ms.

•

We recommend that you use magnetic shielded speakers for the front left/right speakers and center speaker

to prevent video noise from appearing on the TV picture.

•

Use speakers in your setup that have similar tonal characteristics.

If the Rear Speakers are closer, change the delay time of rear speaker.

The distance of (A) and (C) Value (ms)

The distance of (B)

Value (ms)

0.00

1.02

2.04

3.06

4.08

5.10

0.00

2.04

4.08

6.12

8.16

10.20

Delay Time Setting

Setting the sound level

Setting the sound level of the desired channel

How to set delay time

Press [LEVEL] button.

Each time you press the [DELAY] button, the setting of speaker is

changed belows.

FL (Front Left) ◆ CT (Center) ◆◆FR (Front Right) ◆ SL (Surround Left) ◆◆SR (Surround

Right)

Press [LEVEL] button to select a desired speaker to set.

You can select delay time by pressing †/….

Each time you press the [LEVEL] button, it changes in the following order;

FL (Front Left) ◆ CT (Center) ◆◆FR (Front Right) ◆ SL (Surround Left) ◆◆SR (Surround

Right) ◆ WF (Subwoofer).

• Front, Center Speaker : 0~15ms

• Rear Speaker :0~30ms (But, sound field is in MOVIE or PL EMUL mode, it is possible to

adjust up to 40ms)

Press [… / †] button to adjust the sound level of the selected

channel. (-7.5 dB ~7.5 dB)

On completing entering, the screen of delay time will be disappear in 5

seconds.

LEVEL VOLUME LEVEL VOLUME

In case of level setting, the maximum

value of volume is changed as left

tables;

7.5

2.5~3.0

1.5~2.0

0.5~1.0

-7.5~0

6.5~7.0

5.5~6.0

4.5~5.0

3.5~4.0

Repeat step 2-3 and adjust the sound level of the other channels.

On completing entering, the screen of sound level will be disappear

in 5 seconds.

Setting the Balance between each channel by using the test tone

◆ In Dolby Digital and Dolby Pro Logic mode by using the test tone function you can easily

adjust the sound balance of the speakers from the listener’s position in DVD initial setup

mode. (speaker setup)

Select the test tone mode by pressing

[PLAY/PAUSE] button.

Speaker Setup

EFT

CENTER

RIGHT

Type: Large

Level: 0.0 dB

Delay: 0 ms

Type: Small

Level: 0.0 dB

Delay: 0 ms

Type: Small

Level: 0.0 dB

Delay: 0 ms

A hiss noise comes out for 2 seconds from each

speakers in the following order;

Speaker Setup : Default

Type: Small

Level: 0.0 dB

Delay: 5 ms

Type:

Type: Small

Level: 0.0 dB

Delay: 5 ms

Level: 0.0 dB

FL (Front Left) ◆◆CT (Center) ◆◆FR (Front Right) ◆

SL (Surround Left) ◆◆ SW (Subwoofer) ◆◆ SR

(Surround Right) ◆◆...

L. SURR.

SUB. W

R.SURR.

Select:

…

†

√

Test Tone: √/◆◆◆

Delay: ◆œœ √√◆

Level: œœ √√

To adjust the sound level and delay time, press ◆ œœ

√√ in the appropriate channel during operating the test tone.

√√◆

, ^œœor

About DVD

Playable Disc

Terms related with DVD

• DVD, Video CD (Version 1.1, 2.0), S-VCD and Audio CD

Disc type

DVD

Playable

Possible

Impossible

Restriction

CHAPTER

It means the information recorded in a DVD. A title in a DVD is divided into many tracks, of which a track is

called as a chapter. A certain scene of a screen can be quickly searched with the chapter number.

Region number 2 or Region number All (DVD-5, DVD-9, DVD-10, DVD-18)

Video CD

Version 1.0/1.1/2.0, SVCD/CVD

PCM

TITLE

It means the information recorded in a DVD. A DVD can be divided into may titles.

TRACK

It means the information recorded in a video CD and audio CD. A disc consists of many a track, for which a

user can search a certain position.

CD-G

Only Audio playback

MP3 File

CD-ROM

CD-R

dts

Digital Theatre System is a 5.1 -channel surround sound system, which is widely used in movie theatres

around the world. It enables the bit rate to be increased to provide good sound quality. “DTS” and “DTS

Digital Out” are trademarks of Digital Theater Systems, Inc.

Video-CD/CD/CD-ROM (MP3 File)

DVD Video

CD-RW

DVD-R

Multi Angle Some DVD discs contain the various scenes that have been simultaneously shot from a number of different

angles.

DVD+R

DVD-RW

DVD+RW

DVD-ROM

DVD-RAM

Photo CD

DVD Video

PCM

Linear PCM is a signal-recording format used in a CD, while CD is recorded in 44.1kHz/16bit, a DVD is

recorded in 48KHz/16bit up to 96KHz/24bit.

DVD Video

Dolby Digital Dolby Digital enables the delivery of mono through 5.1-channel audio at data rates from 32 kbps to 640 kbps,

thus offering flexibility and economical performance as well as uncompromised sound quality.

Bitstream

Lt/Rt

Digital audio data that is decoded into an analog signal for subsequent output to speakers.

It indicates L/R of Dolby Digital 2CH Downmix output.

REGION MANAGEMENT INFORMATION

Downmix

DOWNMIX is reproducing the proper audio when audio format recorded on a disc differs from the output

audio channel configuration. For example, with just one stereo speaker system you can hear full 5.1 channel

audio.

This unit is designed and manufactured to respond to the Region Management information that is recorded on a DVD disc.

The region number of this player is “2”. If the region number described on the DVD discs does not correspond to the Region

number of this player, the player will not play this disc. This player will play DVD discs made for “ALL” regions. Therefore,

this player will play DVD discs marked with labels containing the region number “2” or “ALL”.

RGB

This stands for red, green and blue. It means the video signal separated into its three primary colour

components ready to drive the picture tube almost directly. Two signalling connections are needed to make

the television accept the synchronisation and RGB signals. All this is in the SCART connector. Not all

televisions have RGB inputs.

ALL

SCART

An acronym (Syndicat des Constructeurs d'Appareils Radiorécepteurs et Téléviseurs) for a connector used with

many kinds of audio-visual equipment. It is also called Peritel and Euro-connector.

(Region 2)

(Region ALL)

Handling Disc

To keep a disc clean condition, please do not touch a side containing play information.

Do not attach a bit of paper or sticky tape on it.

Terms related with DVD

•

DVD

A DVD (abbreviation of Digital Versatile Disc or Digital Video Disc) can include 135 minutes of video

information. And for audio, it can hold up to 8 kinds of languages and 32 kinds of subtitle languages. By using

MPEG-2 video compression and digital 3D surround sound, DVD realizes high-defined screen and quality

sound like a movie theater.

Do not expose a disc to a direct sunlight or electric heating systems.

After using it, please keep a disc in a case.

Cleaning Disc

CDDA

MP3

A CDDA (abbreviation of Compact disc digital audio) is a music disc that is currently used.

Audio compression format that enables audio files to be stored and transferred on a computer with a relatively

small file size. It enables you to enjoy CD quality music. (Short for MPEG-1 Layer 3)

•

Before using it, please rub it from center toward outside with clean clothes.

Do not use any type of solvent such as thinner, benzol (benzene), commercial cleaning goods

or antistatic sprays.

PBC

This is recorded on a Video CD 2.0, Video CD 3.0, SVCD and CVD. The scenes or information to be viewed (or

listened to) can be selected interactively with the TV monitor by looking at the menu shown on the TV

monitor. It stands for PlayBack Control.

Before doubting about troubles (DVD)

Basic information about VCR and Videotape

Symptom

Checks

Terms related with VCR

AFT

Automatic fine tuning, a circuit that automatically adjusts TV reception to optimum condition.

Cable television.

•

The player does not play.

◆ If a DVD is from overseas, it may not be played. Please check a DVD’s region

code whether it has the relative region code 2 or All.

◆ Please check whether a DVD is inserted in a right direction.

◆ If it is a CD-ROM for PC or DVD-ROM, it does not work.

CABLE

Index Search A feature of this VCR that automatically records an index each time recording begins. It helps you locate a

particular segment of the tape quickly and easily.

•

No sound comes through.

◆ Play mode may be “SLOW” or “PAUSE”(In abnormal speed play, no sound

comes through)

◆ Did you connect the parts in right way?

Long Play, an intermediate tape recording speed that combines most of the picture/audio quality obtainable at

the standard recording speed with some of the tape economy of Extended Play (EP).

◆ Please check the operative condition of TV or amplifier.

◆ From SETUP, please check “AUDIO” items.

OSD

OTR

On-screen display of information pertinent to the features of the VCR.

One-touch recording, a feature that allows you to record the program you’re watching by pressing the REC

key. Each press of the key increases the recording time by 30 minutes, up to 10 hours.

•

A disc is playing but screen does not

appear or poor screen appears.

◆ Did you turn on your TV sets?

◆ Did you connect the parts in right way?

◆ The play may be in “PAUSE”.

◆ A disc may have some contaminants or be damaged.

◆ A disc may be bad one.

Radio frequency, the composite audio/video signal supplied to a TV receiver (or other video component) by an

antenna or cable system.

Safety tab

The plastic tab at the back of a video tape cassette which, when removed, prevents accidental erasure of a

recording.

•

Sound is irregular.

◆ Please check the connection with Dolby Digital amplifier.

◆ Please check the plugs are connected with one another tightly.

◆ Some contaminants may be remained in connection terminal.

Standard play, the recording speed to use when the best picture quality is of prime importance (and when

total recording time is not).

Remote control does not work.

◆ Please check the degree of remote control, distance or any interruption.

◆ Battery may be weak or exhausted.

◆ When you operate DVD, use it by pressing [DVD] button.

◆ Unplug the power plug and plug it again.

What is dew condensation symptom?

•

Dolby Digital sound does not work.

◆ Dolby Digital sound can be worked in the Dolby Digital amplifier only.

◆ Please check “Dolby Digital ” mark on your DVD.

◆ Please check the connection is correct.

•

If a VCR is moved from a cool place to a warm and damp place or a place facing a direct cool wind from air-

conditioner...and others, temperature varies sharply, which makes dew on head drums of VCR.

•

[AUDIO] or [SUBTITLE] button does not

work.

◆ If a DVD does not include language information, it does not support the

function.

If dew condensation occurs,

First, turn it on for one or two hours before using it.

[ANGLE] button does not work while a

DVD is playing.

◆ “ANGLE” is supported only in a DVD contains multi angle scenes. Also a user

can confirm the support with the “ANGLE” mark on screen.

Do not use it because it may develop troubles of a VCR or videotape.

“MENU” does not appear while a DVD is

playing.

◆ Please check the degree of remote control, distance or any interruption.

◆ Please check a battery in remote control whether it is exhausted or not.

◆ A DVD may not contain menu information.

How to use a head cleaner

•

In case of a old or contaminated videotape, screen may not be clean from the contamination of VCR heads. Please remove

contaminants using a head-cleaner like below order.

Insert a head-cleaner into VCR.

•

The file name of MP3 (CD-R) appears

with strange letters.

◆ The file name of MP3 recognize only the Alphabet (A~Z, a~z), numbers (0~9)

and a special symbol on keyboard (~, !, @, #, $ ....) and 10 letters can be

displayed in maximum.

Press [PLAY/PAUSE] for 5 seconds, and then press [√√] for about 10 seconds.

◆ The letters except above case will be displayed like “----”.

PLAY (5 secs)

FF (10 secs)

Any MP3 (CD-R) file isn’t displayed.

◆ If the surface of disk is injured, the file display and playback can be impossible.

Eject a head-cleaner from VCR.

• If the screen is not clean yet, please repeat the above 2 or 3 times more.

• A head-cleaner is not for sale. Please ask it for the nearest agent.

• In case a user ask the removal of contaminants of us, the user should pay extra charges.

Before doubting about troubles (VCR)

Checks

Before doubting about troubles (VCR)

Symptom

Checks

Symptom

•

“Power On” does not work.

◆ Please check whether a power plug is inserted in an electric outlet.

•

A screen at pause is trembling or slow

screen is not clear.

◆ Try to use a head-cleaner.

◆ Try to adjust the screen by [TRACKING+/–] button.

It does not work even in “Power On”.

◆ Please check whether a videotape is inserted in.

◆ Try to insert a plug again.

Recording a TV program is impossible.

◆ Please check whether a channel is fixed on video. If not, you have to turn it

into “TV” by pressing [INPUT] button.

•

A videotape is not inputted in.

◆ Please check whether a power plug is inserted in an electric outlet.

◆ Please check whether a videotape is in.

◆ Please check whether a videotape is inserted in a right direction (a side of

transparent window should be on the upside)

◆ Have you inputted a videotape again just after the tape was ejected? Please try

it again after fully ejecting it.

◆ Please check whether the timer recording info is right.

◆ Are RF cables inputted antenna connection terminal correctly?

◆ Does a PR number selected in display section appear?

◆ Please check a tab on a tape whether it is broken or not. (If it was broken,

please scotch-tape it)

◆ When a videotape forces to be ejected, the tape may not be inputted. In the

case, please pull out an outlet, and then push the tape smoothly.

◆ Check whether the screen is displayed in VCR Only Channel. Press [INPUT]

button in this remote controller to adjust in "General Broadcast" condition.

◆ Is the rounded line (RF cable) connected in "ANT.IN" terminal?

•

On inputting a videotape, the tape is re-

ejected.

◆ That’s why a safe mode to protect a videotape is operated automatically.

Please pull out the tape and input it again.

◆ Please check whether the clock is right.

•

Once pressing [REC], a videotape is

ejected automatically.

◆ Please check whether the timer recording info is right.

◆ Please check a tab on a tape whether it is broke or not. (If it was broken,

please scotch-tape it)

A videotape is not ejected.

◆ In case the product is used for a long time, a videotape may not be ejected for

a film inside may be stretched. In the case, please pull out a power plug for

about 10mins and then press [EJECT] button.

•

A channel on video and a play screen

does not appear.

◆ Please check your antenna’s connection.

◆ TV channel should be fixed on video channel .

◆ Please check your antenna’s signal whether it may be weak. In case of its

weakness, please use a frequency amplifier connected with the device.

◆ Press [TV/VCR] and then let “VCR” is displayed on the display panel.

•

In spite of pressing [PR/PRESET], a

channel can not be set.

◆ You may not memorize channels.

◆ Please check your channel setting or press a number button.

While duplicating, screen is not clean

and distorted.

◆ Some tapes or discs distributed in the market for lending is set to prevent copy

in manufacturing. These tapes cannot be duplicated in a good condition.

◆ While in no use of VCR, was it turned on?

◆ Battery may be weak or exhausted.

•

Noise (screen noise) appears on screen.

Noise appears on screen after recording.

◆ While in recording a program, do you watch another channel?

◆ Select TV by pressing [TV/VCR] button on remote control.

•

remote control does not work.

◆ A receiver of remote control may be different with a sender.

◆ Remove barriers between the remote control and the unit.

◆ Is the remote control unit within 7m from the unit?

◆ Specified button is not operated in some status.

◆ In case a videotape is positioned in the end, “FF”, “PLAY” and “REC” do not

work.

◆ While in playing a videotape, there may happen some noise or blot in the part

of the beginning of a videotape or resuming “PAUSE”, which are not

breakdown.

Buttons on remote control do not work.

•

While in playing, noise appears.

◆ Please press [TRACKING +/- ] for better screen. Videotape may be poor. Try to

◆ Please check whether another button is pressed.

change it to another one.

•

Index search does not work.

◆ Are you playing a tape that is not recorded in this recorder? (Try to record it

•

Sound and screen are irregular.

Sound comes out but screen does not

appear.

◆ Please use a head-cleaner to clean VCR heads. VCR heads may be

contaminated.

with the recorder.)

◆ You may start recording it in “REC-PAUSE”. Please start recording it from stop

condition.

•

Screen is irregular and stripes appears.

"Screen Error" message is displayed in a

screen.

•

While recording and playing, the top of

screen extremely waves.

◆ Since VCR Play signals are not stable like a TV signals, screen may be unstable

or curved while in playing. To fix the problem, please horizontal adjustment.

◆ In case videotape is the one recorded by other products or old one, stripe may

appear on the screen.

A screen is not clear.

◆ Try to adjust the screen by [TRACKING+/–] button.

◆ Try to use a head-cleaner.

Specifications

Quick-start guide

◆ Please follow this guide from the beginning to the end. Before you start, unplug all the equipment from the mains supply.

Power

200-240V~ AC 50/60Hz

Consumed electricity

Weight

75W

7.15kg

Stage 1. Connecting the Player to your TV

Dimension (WxHxD)

Operative temperature

Installation condition

Signal type

430mm x 91mm x 370mm

Television

Aerial

+5°C~40°C

Fit the batteries into the remote control.

Make sure that the (+) and (-) marks on

the batteries agree with the (+) and (-)

marks inside the battery compartment.

Horizontal / Relative humidity under 80%

PAL COLOR

200-240V~ AC

50/60 Hz

Antenna Input/output

VIDEO input

U/V-mixed: 75Ω unbalanced

1.0 Vp-p unbalanced, RCA JACK

-8.8dBm, RCA JACK

Plug your aerial into the ANT IN socket of

the player.

AUDIO input

Scart lead (not supplied)

VIDEO output

VIDEO output terminal, 1.0 Vp-p unbalanced, SCART JACK

RGB output (75Ω In load R: 0.7Vp-p, G: 0.7Vp-p, B: 0.7Vp-p,)

Audio output terminal : -5.8dBm(VCR), 2.0Vrms(DVD), SCART JACK

Very high dense tapes with VHS marks

DVD, VIDEO-CD, CD (12cm), CD (8cm), MP3, CD-R, CD-RW

SP:23.39 mm/s, LP: 11.70 mm/s

SP: 3hrs, LP: 6hrs (use of E-180 tape)

24hrs

Connect the black aerial lead provided

from the ANT OUT socket of the player to

your TV aerial socket.

AUDIO output

Playable tape

If you get the scart lead, connect your

player to the TV as above. (You will get

better pictures and sound quality if you

connect your player with a scart lead.)

Playable disc

Tape speed

Back view of your player

Playtime

Clock display

Stage 2. Connecting the Player to 5.1 CH Speaker system

Time Recording

Persistence in power failure

VIDEO S/N (VCR)

8 programs a month

1 min

Front speaker

(right)

Rear speaker

(left surround)

Front speaker

(left)

Be sure to match the speaker cord

to the appropriate terminal on the

components: + to + and – to –.

Over 43dB(Standard recording)

Resolution

VCR

DVD

Over 240 lines (Standard recording)

AM loop antenna

(supplied)

Over 400 lines (DVD Disc PLAY)

Over 65dB (Hi-Fi), over 40dB (Mono)

90dB

If you get an active power

AUDIO (VCR)

subwoofer that has a power

amplifier built-in, connect it to the

subwoofer preout terminal.

AUDIO (DVD)

AUDIO dynamic range

Speaker Output

(Impedance) & (Size)

90dB

Center

30W (6Ω) (240 x 115 x 115)

30W x 2 (6Ω) (140 x 115 x 200)

30W x 2 (6Ω) (108 x 88 x 164)

50W (6Ω) (198 x 350 x 355)

20Hz ~ 20KHz

Plug AM loop antenna and FM

antenna into the specified

terminal on the back of player.

Adjust the direction of the

antenna in order to get the good

condition of receiving.

Front L/R

Rear L/R

Subwoofer

Amp Frequency Response

Radio Tuning Range

FM : 87.5 ~ 108.0 MHz, AM : 522 ~ 1611KHz

FM : 10.7 MHz, AM : 450 KHz

75 Ω (unbalance)

Radio Intermediate Freq.

FM Antenna Impedance

AM Loop Antenna Inductance

FM wire antenna

(supplied)

• To obtain the best possible surround

sound, adjust the speaker

parameters (distance, level, delay

time etc.) (See page 59-61)

12.5 uH (1KHz)

Center speaker

Rear speaker

(right surround)

Subwoofer

Quick-start Guide

Stage 3. Tuning in your TV

Plug the player into the mains and turn it on by pressing the POWER button. RF 52 will

now be displayed on the front panel.

LANGUAGE SET

ENGLISH

DEUTSCH

ITALIANO

ESPAÑOL

FRANÇAIS

NEDERLANDS

Tune a spare channel of your TV until you see the blue ‘Language Set’ screen. Select

the wanted language and country with … or † button. Press OK to confirm. Store

this setting on your TV.

…/†:SELECT

OK:CONFIRM

SETUP:END

If there is any distortion (lines, flickering and so on), the video usually recommends a

new ‘RF’number during the next stage (auto set). Press OK to confirm the new

number. If the player does not recommend any RF channel, select the another

transmission channel except RF 52 using numeric buttons.

If you have connected your player through the SCART lead, it is not necessary from B

to C process. When you turn on the power of the player, TV shows ‘Language Set’

screen automatically.

For selecting the country, refer to the followings.

COUNTRY SET

B: Belgium

D: Germany

DK: Denmark

E: Spain

I: Italy

SF: Finland

LUX: Luxembourg

N: Norway

CH: Switzerland

TR: Turkey

LUX

OTHERS

…/†:SELECT

OK:CONFIRM

SETUP:END

NL: Netherlands

S: Sweden

GR: Greece

Stage 4. Auto set or Auto search

After setting the language and country, ‘Auto Set’ or ‘ Auto Search’ tunes in all the

stations you can receive in your country and sorts them in a common order, for

example, ARD on programme 1, ZDF on programme 2 and so on.

CH 25

PLEASE WAIT...

If ‘Clock Set’ appears on the TV screen, please enter the time and date. Use the

number buttons 0 to 9 on the remote control. Press OK to confirm.

SETUP:END

When ‘Manual Set’ appears on the TV screen, press MENU to end.

MANUAL SET

PR01 ARD PR08 P-08

PR02 ZDF PR09 P-09

PR03 P-03 PR10 P-10

PR04 P-04 PR11 P-11

PR05 MTV PR12 ----

PR06 P-06 PR13 ----

PR07 P-07 PR14 ----

…/†:SELECT

OK:CONFIRM

SETUP:END

HP Hewlett Packard L1506 User Manual
GE DECT 6 0 CORDLESS HANDSET 28111 User Manual
GE 681131691666 User Manual
GE 26998 User Manual
Electrolux 922019 User Manual
Eizo Nanao Computer Monitor EV2216W User Manual
Diamond Multimedia Radeon X600PRO User Manual
Cres Cor CO151FW1818B User Manual
Black Box Computer Hardware LBPS310A KIT User Manual
Asus Striker Extreme User Manual