ConnectPRO Master IT StreamLine SL 208 User Manual

ConnectPRO  
StreamLine Console  
User Guide  
For Models:  
SL-01  
SL-18  
SL-208  
SL-116  
Table of Contents  
n INTRODUCTION  
l Overview…………………………………………………………………………………..1  
n STREAMLINE CONSOLE  
l Overview…………………………………………………………………………………..2  
l Features………….………………………………………………………………………..2  
l Packing List…………………………………………………………………………….….3  
l Assembly…………………………………………………………………………………..4  
l Installation…………………………………………………………………………………7  
l Front Panel………………………………………………………………..………………8  
l Specification……………………………………………………………………………….9  
Please read this manual thoroughly and follow the Installation procedures to  
prevent any damage to the StreamLine or any connecting device.  
StreamLine Console  
------------------------ Introduction  
l Overview  
The StreamLine offers the ultimate in styling and computer management. With a keyboard, mouse, TFT  
LCD panel and an 8-port KVM switch housed in an industry standard 19" 1U-height rack drawer, it saves  
you up to 1/3 of valuable real estate from a rack cabinet. Better yet, when the StreamLine Console is  
cascaded with other StreamLine KVM switches to increase server management capacity, you save even  
more!  
StreamLine’s unique extension accessories can accommodate it with rack cabinet depth of only 20" (50 cm)  
and up. Now, equip your rack cabinet with the StreamLine, throw away the bulky VGA monitor, keyboard  
and mouse, and streamline your computer management.  
Master-IT StreamLine Console  
It saves you up to 1/3 of valuable rack cabinet spaces and  
acts as a space-saving console with keyboard, mouse and  
monitor. It can be connected to a computer directly or to  
the console ports of a KVM switch.  
StreamLine Console with One-Console  
KVM Switch  
This powerful combination allows you to access multiple  
computers from one keyboard, mouse and monitor on the  
integrated drawer. Operation is as simple as pressing  
push button, entering hot-key command and navigating  
through the user-friendly OSD (on-screen display) menu.  
With an SL-18 connected, it switches up to 8 IBM-  
compatible computers.  
StreamLine Console with Dual-Console  
KVM Switch  
The StreamLine, combined with an advanced multi-access  
KVM Switch enables you to control multiple computers  
from one out of two different locations, Local as the  
StreamLine Console or Remote as another set of  
keyboard, mouse and monitor.  
SL-208 controls  
8
computers and SL-216 controls  
16 computers.  
StreamLine Console  
------------------------ StreamLine Console  
l Overview  
The StreamLine Console is a 19” 1U drawer designed for applications where space is at a premium, or CRT  
displays are undesirable. It features a 15” flat panel TFT display, keyboard and a touch pad.  
The drawer can be pulled out for operation from the rack on slides which latch in the extended position.  
When not in use, the display can be folded down, locked and secured while pushed in.  
With different Rear bracket & extension kit, the StreamLine Console can be mounted on rack cabinet of  
various depths.  
The console comes with standard PS/2 keyboard connector, PS/2 mouse connector and HDB15 VGA  
connector for computer or KVM switch connection.  
l Features  
n Modularized design  
n Optional Master-IT PRO KVM switches available  
n Flip-open 15" TFT LCD panel included with resolution 1024x768  
n For rack cabinet with depth from 20"(50cm) and up (with appropriate Rear bracket & extension kit)  
n Standard 19" 1U rack drawer  
n Ergonomic hand rest design  
n Locking mechanism locks the drawer when pulled out, pushed in, or folded down  
n Full 105 key, low-profile, sturdy keyboard included  
n Standard connectors for PC connection  
n Quick and easy installation  
StreamLine Console  
l Packing List  
These are required to install the StreamLine Console:  
n StreamLine Console: assembled "LCD panel  
keyboard + mouse pad" drawer  
+
n Rear bracket & extension kit: This kit contains two pieces of rear brackets and two pieces of aluminum  
blocks. Make sure you have the correct kit to fit the depth of your cabinet. Note: the following length is  
measured between "front pole and rear pole inside a rack cabinet" not the outside depth of a rack cabinet  
enclosure.  
RES-1  
RES-2  
RES-3  
RES-4  
Front Pole to rear pole distance  
cm  
inch  
cm  
inch  
cm  
inch  
cm  
inch  
Minimum  
Maximum  
49.5  
57  
191/2  
223/8  
57.5  
70.5  
225/8  
273/4  
67.5  
80.5  
265/8  
315/8  
77.5  
90.5  
301/2  
355/8  
n KVM Switch: KVM module box can be connected to a StreamLine Console or be used as a stand-alone  
KVM switch.  
Module type  
SK-01  
1
1
SK-18  
1
8
Yes  
SK-28  
2
8
Yes  
SK-216  
2
16  
No. of console port  
No. of computer port  
KVM switch inside  
No  
Yes  
n Bolt-and-nut set  
n User's manual  
StreamLine Console  
l Assembly  
1. Choose a proper position for the rack drawer. Mount  
the rear brackets (from the Rear bracket & extension  
kit), and lightly fasten them onto the rear vertical poles.  
Both will be removed later.  
2. Remove the stopper from the assembled drawer. The stopper is designed to refrain the drawer from  
sliding out during transportation.  
3. Slide the assembled drawer to the rack cabinet from  
the front and insert the two slide rails of the  
assembled drawer into the pockets of the rear  
brackets.  
4. Fasten the assembled drawer onto the front brackets  
by four screws.  
StreamLine Console  
5. Remove the rear brackets. Now, the front brackets hold the assembled drawer.  
6. Attach the aluminum extensions (from the Rear bracket & extension kit) to both sides of the KVM  
module box. Please note the length of the aluminum extensions and mount them in one of the following  
ways.  
Short aluminum extensions attachment  
Long aluminum extensions attachment  
7. Slide the rear brackets onto the aluminum extensions. And, then insert both slide rails of the assembled  
drawer into the tight space formed by the combination of the rear brackets and the aluminum extensions.  
The KVM module should be pushed in evenly on both right and left sides.  
StreamLine Console  
8. Push the rear brackets all the way in and fasten them.  
9. Slide the assembled drawer out. Push the KVM  
module box evenly toward the drawer, and then lock  
both units by the screws.  
10. Make sure the C-36 connectors are firmly mated during step 10.  
11. Connect the power supply to the power jack on the KVM module to complete the installation.  
StreamLine Console  
l Installation  
Consider the StreamLine Console as a set of keyboard, mouse and monitor, and connect it directly to a  
computer.  
StreamLine Console connects to a computer  
Or, the StreamLine Console can be connected to a Master-IT PRO KVM switch as shown below.  
StreamLine Console connects to a Master-IT PRO KVM switch  
StreamLine Console  
l Front Panel  
n KVM Control and Status: (This section is effective only when a KVM switch module is connected.)  
1. Computer Selection Pad  
Press one of these pushbuttons to select a computer.  
2. Selected Computer Indicator  
One of the indicators turns red when pushbuttons, hotkey or OSD menu selects a  
corresponding computer.  
3. Local Console in operation  
It turns green when a computer is accessed through the StreamLine Console.  
4. Remote Console in operation  
It turns green when a computer is accessed by another set of keyboard/mouse/monitor  
connected to the "Remote" console when the KVM switch is either SL-208 or SL-216.  
n LCD Panel Control  
5. LCD Panel Menu  
These buttons invoke the OSD menu for the LCD panel and acts as menu selection.  
6. LCD Panel Adjustment  
Lets you adjust settings for the LCD panel.  
n Keyboard Status & LCD Panel Power Switch  
7. Num Lock  
Keyboard Num Lock status.  
8. Caps Lock  
Keyboard Caps Lock status.  
9. Scroll Lock  
Keyboard Scroll Lock status.  
10. LCD Panel Power Switch  
StreamLine Console  
l LCD Panel Specification  
LCD size  
15.1” TFT  
Active Display Area  
Pixel Pitch (mm)  
Resolution  
304.1 x 228.1 (mm)  
0.297 (H) x 0.297 (V)  
1024 x 768 @60/70/75Hz  
200 cd/M^2  
Brightness  
Contrast Ratio  
Display Color  
User Control  
Input Signal  
Plug-n-Play VESA  
Power Management  
400  
16.7M (8 bits)  
OSD Control (auto saving)  
RGB analog, H/V separate  
VESA DDC 1/2B  
VESA DPMS compliant  
“on” mode: 23.2W  
“stand-by” mode <= 1W  
“suspend” mode <= 1W  
“off” mode <= 1W  
(left/right) +80 ~ -80  
(up/down) +80 ~ -80  
105 Key, PS/2  
Viewing Angle  
Keyboard  
Mouse Touch Pad  
PS/2  
StreamLine Console  
Limited Warranty  
IN NO EVENT SHALL THE ConnectPROs LIABILITY FOR DIRECT OR  
INDIRECT, SPECIAL, INCIDENTIAL OR CONSEQUENTIAL DAMAGES, LOSS OF  
PROFIT, LOSS OF BUSINESS, OR FINANCIAL LOSS WHICH MAY BE CAUSED  
BY THE USE OF THE PRODUCT EXCEEDS THE PRICE PAID FOR THE  
PRODUCT.  
ConnectPROä makes no warranty or representation, expressed or implied with  
respect to the contents or use of this documentation, and especially disclaims its  
quality, performance, merchantability, or fitness for any particular purpose.  
ConnectPROä also reserves the right to revise or update the product or  
documentation without obligation to notify any user of such revisions or updates.  
For further information, please contact your direct vendor.  
All the brand names and registered trademarks are the property of their respective  
owners.  
StreamLine Console  
20525 Paseo Del Prado  
Walnut, CA 91789  
(909) 444-9288  

HP Hewlett Packard L1950 User Manual
HP Hewlett Packard L176v User Manual
Hotpoint GF941 User Manual
GE TRIVECTION ZET3038 User Manual
Fagor America Portable Induction Cooktop User Manual
Eizo FP 2000W User Manual
Cypress CY14B104M User Manual
Caldera SSK365NG US User Manual
Asus INTEL 810 MICROATX MOTHERBOARD CUW RM User Manual
Antec NAK3480 User Manual