Compaq f1523 User Manual

User’s Guide  
vf15/vf17, FP15/FP17, L1502/L1702,  
L1502m/L1702m, f1523/f1723,  
FP5315/FP7317 Flat Panel Monitors  
Document Part Number: 322638-003  
May 2003  
This guide provides information on setting up the monitor,  
installing drivers, using the on-screen display menu,  
troubleshooting and technical specifications.  
Contents  
1 Product Features  
2 Safety and Maintenance Guidelines  
Important Safety Information. . . . . . . . . . . . . . . . . . . . . . 2–1  
Maintenance Guidelines. . . . . . . . . . . . . . . . . . . . . . . . . . 2–2  
Cleaning the Monitor. . . . . . . . . . . . . . . . . . . . . . . . . 2–4  
Shipping the Monitor. . . . . . . . . . . . . . . . . . . . . . . . . 2–4  
3 Setting Up the Monitor  
Installing the Monitor Pedestal . . . . . . . . . . . . . . . . . . . . 3–1  
Connecting the Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . 3–4  
Removing the Monitor Base . . . . . . . . . . . . . . . . . . . . . . 3–7  
Mounting the Monitor . . . . . . . . . . . . . . . . . . . . . . . . 3–9  
4 Operating the Monitor  
Installing the Information Files . . . . . . . . . . . . . . . . . . . . 4–1  
Front Panel Components . . . . . . . . . . . . . . . . . . . . . . . . . 4–2  
Adjusting Monitor Settings . . . . . . . . . . . . . . . . . . . . . . . 4–4  
Using the On-Screen Display . . . . . . . . . . . . . . . . . . 4–5  
Adjusting Screen Quality. . . . . . . . . . . . . . . . . . . . . . 4–8  
Optimizing Digital Conversion . . . . . . . . . . . . . . . . . 4–8  
Identifying Monitor Conditions . . . . . . . . . . . . . . . . . . . . 4–9  
Sleep Timer Mode . . . . . . . . . . . . . . . . . . . . . . . . . . 4–10  
sRGB Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–11  
Changing the Color Temperature . . . . . . . . . . . . . . 4–12  
Installing the sRGB ICM File for Microsoft Windows 98,  
User’s Guide  
iii  
Windows ME, Windows 2000 and Windows XP . . 4–12  
A Troubleshooting  
Solving Common Problems . . . . . . . . . . . . . . . . . . . . . . . A–1  
Using the Worldwide Web. . . . . . . . . . . . . . . . . . . . . . . . A–2  
Preparing to call Technical Support. . . . . . . . . . . . . . . . . A–3  
B Technical Specifications  
Entering User Modes. . . . . . . . . . . . . . . . . . . . . . . . . B–4  
Energy Saver Feature. . . . . . . . . . . . . . . . . . . . . . . . . B–4  
C Agency Regulatory Notices  
Federal Communications Commission Notice. . . . . . . . . C–1  
Modifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C–1  
Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C–2  
Declaration of Conformity for Products Marked with FCC  
Logo, United States Only. . . . . . . . . . . . . . . . . . . . . . . . . C–2  
Canadian Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . C–3  
Avis Canadien . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C–3  
European Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . C–3  
Japanese Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C–3  
Korean Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C–4  
EPA Energy Star Compliance . . . . . . . . . . . . . . . . . . C–4  
Power Cord Set Requirements . . . . . . . . . . . . . . . . . . . . . C–4  
D LCD Monitor Quality  
and Pixel Policy  
User’s Guide  
iv  
1
Product Features  
The Flat Panel Display has an active matrix, thin-film transistor  
(TFT), liquid crystal display (LCD). The monitor features  
include:  
vf15, FP15, L1502, L1502m, f1523, and  
FP5315 Models  
15-inch (38.1 cm) viewable area display.  
1024 x 768 resolution, plus full-screen support for lower  
resolutions.  
Wide viewing angle to allow viewing from a sitting or  
standing position, or moving side-to-side.  
Tilt adjustment capabilities.  
Removable pedestal and VESA 75mm mounting holes for  
flexible mounting solutions.  
Plug and play capability if supported by your system.  
On-Screen Display (OSD) adjustments in the following six  
different languages: English, Dutch, French, German, Italian,  
and Spanish for ease of set-up and screen optimization.  
Software and Reference Library CD includes an information  
file (INF), Image color Matching File (ICM), and product  
documentation.  
Energy Saver feature for Energy Star compliance.  
Security lock slot  
User’s Guide  
1–1  
Product Features  
AssetControl  
Speakers included on the front panel of the multimedia  
models only  
Compliant with the following regulated specifications:  
EPA ENERGY STAR  
European Union CE Directives  
Swedish MPR II 1990  
Swedish TCO Display Requirements  
vf17, FP17, L1702, L1702m, f1723, and  
FP7317 Models  
17-inch (43.18 cm) viewable area display.  
1280 × 1024 native resolution, plus full-screen support for  
lower resolutions.  
Wide viewing angle to allow viewing from a sitting or  
standing position, or moving side-to-side.  
Tilt adjustment capabilities.  
Removable pedestal and VESA 100mm mounting holes for  
flexible mounting solutions.  
Plug and play capability if supported by your system.  
On-Screen Display (OSD) adjustments in English, Dutch,  
French, German, Italian, and Spanish for ease of set-up and  
screen optimization.  
Software and Reference Library CD includes an information  
file (INF), Image Color Matching file (ICM), and product  
documentation.  
Energy Saver feature for Energy Star compliance.  
AssetControl  
1–2  
User’s Guide  
Product Features  
Speakers included on the front panels of multimedia models  
only  
Compliant with the following regulated specifications:  
EPA ENERGY STAR  
European Union CE Directives  
Swedish MPR II 1990  
Swedish TCO Display Requirements  
User’s Guide  
1–3  
2
Safety and Maintenance  
Guidelines  
Important Safety Information  
A power cord is included with your monitor. If another cord is  
used, use only a power source and connection appropriate for this  
monitor. For information on the correct power cord set to use with  
your monitor, refer to the “Power Cord Set Requirements” section  
in Appendix C.  
ÅWARNING: To reduce the risk of electric shock or damage to your  
equipment, do not disable the power cord grounding feature. This  
equipment is designed to be connected to a grounded (earthed)  
power outlet that is easily accessible to the operator. The grounding  
plug is an important safety feature.  
ÅWARNING: For your safety, be sure that the power outlet you plug  
the power cord into is easily accessible and located as close to the  
equipment as possible. When you need to disconnect the power to  
the equipment, unplug the power cord from the power outlet by  
grasping the plug firmly. Never pull on the cord.  
User’s Guide  
2–1  
Safety and Maintenance Guidelines  
ÄCAUTION: For the protection of your monitor, as well as your  
computer, connect all power cords for your computer and its  
peripheral devices (such as a monitor, printer, scanner) to some form  
of surge protection device such as a power strip or Uninterruptible  
Power Supply (UPS). Not all power strips provide surge protection;  
the power strips must be specifically labeled as having this ability.  
Use a power strip whose manufacturer offers a Damage Replacement  
Policy so you can replace your equipment if surge protection fails.  
Maintenance Guidelines  
To enhance the performance and extend the life of your monitor:  
Do not open your monitor cabinet or attempt to service this  
product yourself. Adjust only those controls that are covered  
in the operating instructions. If your monitor is not operating  
properly or has been dropped or damaged, contact your HP  
authorized dealer, reseller, or service provider.  
Use only a power source and connection appropriate for this  
monitor, as indicated on the label/back plate of the monitor.  
Be sure the total ampere rating of the products connected to  
the outlet does not exceed the current rating of the electrical  
outlet, and the total ampere rating of the products connected  
to the cord does not exceed the rating of the cord. Look on the  
power label to determine the ampere rating (AMPS or A) for  
each device.  
Install your monitor near an outlet that you can easily reach.  
Disconnect the monitor by grasping the plug firmly and  
pulling it from the outlet. Never disconnect the monitor by  
pulling the cord.  
Turn your monitor off when not in use. You can substantially  
increase the life expectancy of your monitor by using a screen  
saver program and turning off the monitor when not in use.  
2–2  
User’s Guide  
Safety and Maintenance Guidelines  
Unplug your monitor from the wall outlet before cleaning.  
Do not use liquid cleaners or aerosol cleaners. Use a damp  
cloth for cleaning. If the screen requires additional cleaning,  
use an antistatic screen cleaner.  
ÄCAUTION: Do not use benzene, thinner, ammonia, or any other  
volatile substances to clean your monitor or the screen. These  
chemicals may damage the cabinet finish as well as the screen.  
Slots and openings in the cabinet are provided for ventilation.  
These openings must not be blocked or covered. Never push  
objects of any kind into cabinet slots or other openings.  
Do not drop your monitor or place it on an unstable surface.  
Do not allow anything to rest on the power cord. Do not walk  
on the cord.  
Keep your monitor in a well-ventilated area, away from  
excessive light, heat or moisture.  
When removing the monitor base, you must lay the monitor  
face down on a soft area to prevent it from getting scratched,  
defaced, or broken.  
User’s Guide  
2–3  
Safety and Maintenance Guidelines  
Cleaning the Monitor  
To clean the monitor, follow these steps:  
1. Turn off the monitor and the computer.  
2. Dust the monitor by wiping the screen and the cabinet with a  
soft, clean cloth.  
If the screen requires additional cleaning, use a clean cloth  
dampened with isopropyl alcohol.  
ÄCAUTION: Do not use benzene, thinner, ammonia, or any volatile  
substance to clean the monitor screen or cabinet. These chemicals  
may damage the monitor. Never use water to clean an LCD screen.  
Shipping the Monitor  
Keep the original packing box in a storage area. You may need it  
later if you move or ship your monitor.  
2–4  
User’s Guide  
3
Setting Up the Monitor  
To set up the monitor, ensure that the power is turned off to the  
monitor, computer system, and other attached devices, then  
follow the steps below.  
Installing the Monitor Pedestal  
To install the monitor pedestal:  
1. Place the pedestal plate on your desktop or table and check to  
be sure the arrow on the underside of the plate is facing  
forward.  
Do not install the base if the monitor will be used on a wall,  
swing arm, or other mounting fixture; instead see the section on  
“Mounting the Monitor” in this chapter.  
User’s Guide  
3–1  
Setting Up the Monitor  
2. Using both hands, position the monitor over the pedestal base  
and press down firmly to lock the pedestal base in place.  
When the base locks, it will make a clicking sound. Make  
sure the pedestal base is securely locked before continuing  
with the setup.  
Inserting the Monitor into the Pedestal Base  
3–2  
User’s Guide  
Setting Up the Monitor  
If you need to remove the pedestal base, lay the monitor down on  
a soft protected surface. On the bottom side of the pedestal base,  
press together the two tabs as shown in the following illustration.  
This will release the pedestal from the base.  
Removing the Pedestal Base  
User’s Guide  
3–3  
Setting Up the Monitor  
Connecting the Monitor  
1. Place the monitor in a convenient, well-ventilated location  
near your computer.  
2. Connect the monitor signal cable on the back of the monitor  
to the video connector on the rear panel of the computer.  
3. Connect one end of the power cable to the back of the  
monitor, and the other end to an electrical wall outlet.  
Connecting the VGA and Power Cables  
3–4  
User’s Guide  
Setting Up the Monitor  
4. If your monitor is a multimedia model, connect one end of  
the audio cable to the back of the monitor, and the other end  
to the audio connector on the back of the computer.  
Connecting the Audio Cable  
User’s Guide  
3–5  
Setting Up the Monitor  
5. Adjust the monitor as needed for your comfort using the  
monitor’s tilt adjustment capability.  
Tilting the Monitor  
ÄCAUTION: Burn-in image damage may occur on monitors that  
display the same static image on screen for a prolonged period of  
time. To avoid burn-in image damage on your monitor screen, you  
should always activate a screen saver application or turn off the  
monitor when it is not in use for a prolonged period of time. Image  
retention is a condition that may occur on all LCD screens.  
3–6  
User’s Guide  
Setting Up the Monitor  
ÅWARNING: To reduce the risk of electric shock or damage to your  
equipment:  
Do not disable the power cord grounding plug. The grounding  
plug is an important safety feature.  
Plug the power cord into a grounded (earthed) electrical outlet  
that is easily accessible at all times.  
Disconnect power from the monitor by unplugging the power  
cord from the electrical outlet.  
Do not place anything on power cords or cables. Arrange them  
so that no one may accidentally step on or trip over them. Do not  
pull on a cord or cable. When unplugging from the electrical  
outlet, grasp the cord by the plug.  
Removing the Monitor Base  
You can remove the monitor base to mount the monitor on a wall,  
a swing arm, or other mounting fixture. Read the Caution and  
Warning statements below before beginning the procedure.  
ÄCAUTION: Before beginning to disassemble the monitor, be sure  
the monitor is turned off and the power and signal cables are both  
disconnected. If your monitor has a connected audio cable,  
disconnect it.  
ÅWARNING: Do not remove the base from the monitor while the  
monitor is in the upright position. Lay the front bezel down on a soft  
area to prevent it from getting scratched, defaced, or broken. Before  
removing the monitor from the base, ensure that the base is set to the  
maximum base extension. Attempting to remove the monitor from the  
base while upright in the minimum base extension may result in injury  
to the user.  
User’s Guide  
3–7  
Setting Up the Monitor  
1. Disconnect and remove the signal and power cables from the  
back of the monitor.  
2. Remove the two screws 1 as shown in the following  
illustration.  
Removing the Monitor Base  
ÄCAUTION: Ensure that the bottom of the monitor base is positioned  
over a table or desktop before removing the base from the monitor.  
3. Remove the monitor base from the monitor.  
3–8  
User’s Guide  
Setting Up the Monitor  
Mounting the Monitor  
1. Remove the monitor base. Refer to “Removing the Monior  
Base” steps in the previous section.  
After the base is removed from the monitor, four threaded  
mounting holes are exposed on the monitor back panel to be  
used for mounting purposes. These mounting holes are  
spaced 75 or 100mm apart and are compliant with the Video  
Electronics Standards Association (VESA) standard for  
mounting flat panel displays. The 75mm VESA hole pattern  
supports the 15” monitors only, and the 100mm hole pattern  
supports the 17” monitors only.  
2. Mount the monitor to a swing arm or other mounting fixture  
by following the instructions included with the mounting  
fixture to be used.  
User’s Guide  
3–9  
4
Operating the Monitor  
Installing the Information Files  
The CD-ROM included with this monitor contains two  
information files to be installed onto your computer; an .INF file  
and an .ICM file.  
The .INF file defines monitor resources and provides  
specifications used by most operating systems to install  
support software for certain hardware devices. The .INF file  
ensures monitor compatibility and optimization with your  
computer’s graphics adapter. INF files are also downloadable  
by clicking on: http://www.hp.com/go/support and selecting the  
desired monitor.  
The .ICM file provides color matching consistency from  
monitor screen to printer and is activated from within  
graphics programs that have this feature.  
To install these files on your computer, insert the Software and  
Reference Library CD in your computer CD-ROM drive. When  
the CD menu launches, select Install INF and ICM Files” and  
follow the on-screen instructions.  
User’s Guide  
4–1  
Operating the Monitor  
Front Panel Components  
L1502m, L1702m, f1523, f1723, FP5315, and FP7317 Monitors  
No. Control  
Function  
1
2
Speakers  
Audio feature for music, alarms, etc.  
(multimedia models only)  
Connects a headphone set to the monitor.  
(Headphone jack)  
Menu button  
3
4
Launches the On-Screen Display (OSD) menu and  
selects functions.  
– (Minus button)  
• When OSD is inactive, auto-adjusts the screen  
image.  
• When OSD is active, navigates in reverse  
through the OSD and adjusts OSD scale settings.  
5
+ (Plus button)  
When the OSD is active, navigates through the OSD  
and adjusts OSD scale settings.  
4–2  
User’s Guide  
Operating the Monitor  
No. Control  
Function  
6
Controls the volume level of the monitor speakers.  
(Volume control)  
Power LED  
7
8
Fully powered = Green.  
Sleep mode = Amber.  
Sleep Timer mode = Flashing Amber.  
Power Switch  
Powers the monitor on and off.  
FP15, FP17, L1502, L1702, vf15, and vf17 Monitors  
No. Control  
Function  
1
2
Menu button  
Launches the On-Screen Display (OSD) menu and  
selects functions.  
– (Minus button)  
• When OSD is inactive, auto-adjusts the screen  
image.  
• When OSD is active, navigates in reverse through  
the OSD and adjusts OSD scale settings.  
User’s Guide  
4–3  
Operating the Monitor  
No. Control  
Function  
3
4
+ (Plus button)  
When the OSD is active, navigates through the OSD  
and adjusts OSD scale settings.  
Power LED  
Fully powered = Green.  
Sleep mode = Amber.  
Sleep Timer mode = Flashing Amber.  
5
Power Switch  
Powers the monitor on and off.  
Adjusting Monitor Settings  
Use the On-Screen Display (OSD) to adjust the screen image  
based on your viewing preferences. To access the OSD, do the  
following:  
1. If the monitor is not already on, press the Power switch to  
turn on the monitor.  
2. To access the OSD Menu, press the Menu button on the  
monitor’s front panel.  
4–4  
User’s Guide  
Operating the Monitor  
3. To navigate through the OSD Menu, press the + (Plus) button  
on the monitor’s front panel to scroll up, or the – (Minus)  
button to scroll in reverse.  
4. To select an item from the OSD Menu, use the + or – buttons  
to scroll to and highlight your selection, then press the Menu  
button to select that function.  
5. Adjust the item using the + or – buttons on the front panel to  
adjust the scale.  
6. After adjusting the function, select Save and Return, or  
Cancel if you don’t want to save the setting, then select Exit  
from the Main Menu.  
If the buttons remain untouched for 10 seconds while displaying a  
menu, new adjustments will be discarded and the settings will  
revert to previous settings and exit the menu.  
Using the On-Screen Display  
There are two On-Screen Display menus available; one for basic  
adjustments, and one for advanced adjustments.  
To access the Basic OSD Menu, press the menu button on the  
monitor's front panel.  
Basic OSD Menu Levels  
Menu Level 1  
Menu Level 2  
Brightness  
Adjustment Scale  
Adjustment Scale  
Contrast  
Auto Adjustment  
User’s Guide  
4–5  
Operating the Monitor  
Basic OSD Menu Levels  
Menu Level 1 Menu Level 2  
Advanced Menu  
Exit  
To access the Advanced OSD Menu, press the menu button again,  
or select Advanced Menu from the Basic OSD Menu.  
After selecting the Advanced Menu from the Basic Menu, the  
Advanced Menu remains the default OSD on subsequent  
power-ups of the monitor until the Basic Menu is selected or  
Factory Reset is applied.  
The Advanced OSD Menu has up to three sublevels and can be  
viewed in one of six available languages. The following table  
provides the menus and their functions at each level:  
Advanced OSD Menu Levels  
Level 1  
Level 2  
Level 3  
Factory  
Reset  
Brightness  
Contrast  
Adjustment Scale  
Adjustment Scale  
Auto Adjustment  
Y
Y
Y
Y
Y
Y
Y
Image Control  
Adjusting” Message  
Horizontal Position Adjustment Scale  
Vertical Position  
Clock  
Adjustment Scale  
Adjustment Scale  
Adjustment Scale  
Clock Phase  
Cancel  
Save and Return  
4–6  
User’s Guide  
Operating the Monitor  
Advanced OSD Menu Levels (Continued)  
Level 1 Level 2 Level 3  
Factory  
Reset  
Color  
9300 K  
Y
(FP5315, FP7317,  
FP15, FP17,  
f1523, f1723,  
vf15, vf17  
models)  
6500 K - sRGB  
Y
(L1502, L1702,  
L1502m, L1702m  
models)  
Custom Color  
Custom Color  
Adjustment  
Cancel  
Save and Return  
Deutsch  
Language  
English  
N
Espanol  
Francais  
Italiano  
Nederlands  
Cancel  
Save and Return  
Power Saver  
Power On Recall  
Mode Display  
Sleep Timer  
Basic Menu  
Cancel  
Management  
On / Off Selection  
On / Off Selection  
On / Off Selection  
Timer Menu  
N
N
N
Save and Return  
OSD Control  
Horizontal Position Adjustment Scale  
N
N
N
Vertical Position  
OSD Timeout  
Adjustment Scale  
Adjustment Scale  
User’s Guide  
4–7  
Operating the Monitor  
Advanced OSD Menu Levels (Continued)  
Level 1  
Level 2  
Level 3  
Factory  
Reset  
Cancel  
Save and Return  
Factory Reset  
Yes  
No  
Exit  
Adjusting Screen Quality  
Allow the monitor to warm up for 20 minutes before performing  
the following procedures.  
The Auto-adjustment feature automatically fine-tunes the image  
quality each time a new video mode is displayed. If additional  
image quality improvement is desired, run the Auto-Adjust  
software on the CD and press the – (Minus) button on the monitor  
front panel to manually activate the Auto-Adjustment function.  
For more precise adjustments, run the Auto-Adjust software on  
the CD, and use the Clock and Phase controls of the monitor to  
fine-tune the image.  
Optimizing Digital Conversion  
This monitor contains advanced circuitry that allows the flat  
panel screen to function like a standard monitor. Two controls in  
the on-screen display can be adjusted to improve image  
performance: Clock and Clock Phase. Use these controls only  
when the auto-adjust function does not provide a satisfactory  
image.  
The Clock must first be set correctly since the Clock Phase  
settings are dependent on the main Clock setting.  
4–8  
User’s Guide  
Operating the Monitor  
Clock—Increase/decrease the value to minimize any vertical  
bars or stripes visible on the screen background.  
Clock Phase—Increase/decrease the value to minimize video  
distortion or video jitter.  
When using the controls, you will obtain the best results by using  
the Auto-Adjustment software.  
When adjusting the Clock and Clock Phase values, if the monitor  
images become distorted, continue adjusting the values until the  
distortion disappears. To restore the factory settings, select Yes  
from the Factory Reset menu in the on-screen display.  
Identifying Monitor Conditions  
Special messages will appear on the monitor screen when  
identifying the following monitor conditions:  
Input Signal Out of Range— Indicates the monitor does not  
support the input signal because the resolution and/or refresh  
rate are set higher than the monitor supports. For 15”  
monitors, set the resolution and refresh rate to 1024 x 768 at  
60 Hz. For 17” monitors, set the resolution and refresh rate  
for 1280 x 1024 at 60 Hz. Restart your computer for the new  
settings take effect.  
Going to Sleep— Indicates the screen display is entering a  
sleep mode.  
Check Video Cable— Indicates the video cable is not  
properly connected to the computer.  
OSD Lock—The OSD can be enabled or disabled by pressing  
and holding the Menu button on the front panel for 10  
seconds. If the OSD is locked, the warning message “OSD  
Lock” displays for ten seconds.  
User’s Guide  
4–9  
Operating the Monitor  
If the OSD is locked, press and hold the Menu button for  
10 seconds to unlock the OSD.  
If the OSD is unlocked, press and hold the Menu button  
for 10 seconds to lock the OSD.  
Sleep Timer Mode  
The Sleep Timer mode is an energy-saving feature that enables  
you to set a time for the monitor to power on and off at the same  
time every day. This also extends the life of the backlight bulbs in  
the monitor. The Sleep Timer has five settings:  
Set Current Time  
Set Sleep Time  
Set On Time  
Timer: On/Off  
Sleep Now  
To set the timer:  
1. Press the Menu button on the monitor front panel to display  
the Advanced Menu.  
2. Scroll down and highlight Management.  
3. Press the Menu button to select Management.  
4. Scroll down and highlight and select Sleep Timer > Set  
Current Time.  
You must set the current local time before you reset the time for  
Sleep Time or On Time. Note that the time is displayed in a 24  
hour clock format. For example, 1:15 p.m. displays as 13 hours  
15 minutes.  
5. Press the Menu button once to enter the adjustment mode for  
hours.  
4–10  
User’s Guide  
Operating the Monitor  
6. Press the - (Minus) or + (Plus) buttons to adjust the hour.  
7. Press the Menu button again to enter the time for minutes.  
8. Press the - (Minus) or + (Plus) buttons to adjust the minutes.  
9. Press the Menu button to lock in the time chosen.  
10. After setting the current time, the highlight automatically  
skips to Set Sleep Time hours. Repeat steps 6 through 9 to set  
Sleep Time.  
11. If you do not want to set Sleep Time, press the Menu button  
twice, then select Save and Return to exit the menu.  
12. After setting Sleep Time, the highlight automatically skips to  
Set On Time hours. Repeat steps 6 through 9 to set On Time.  
13. Set the Timer mode to On to activate the Sleep Timer  
settings.  
14. When you are finished, select Save and Return to exit the  
menu.  
The fifth selection, Sleep Now, turns the monitor backlights off  
immediately and stays in sleep mode until the next On Time  
activates or a monitor button is pressed.  
sRGB Support  
The monitor is designed to support sRGB for color management,  
which adapts to the color standards used in the image technology  
industry. Additional information on sRGB is available on  
To take advantage of the sRGB support, you will need to change  
your monitor’s color temperature to 6500 K - sRGB and install  
the sRGB color profile (ICM) file.  
User’s Guide  
4–11  
Operating the Monitor  
Changing the Color Temperature  
These steps are not necessary for the L1502, L1502m, L1702 and  
L1702m models. When the color temperature is changed to  
6500 K - sRGB, there will be a small reduction in brightness.  
1. Press the Menu button on the front panel of the monitor to  
launch the Main Menu of the OSD.  
2. Select Advanced Menu to access all options in the Main  
Menu.  
3. Select Color to display the Color Temperature menu.  
4. Select 6500 K - sRGB.  
5. Select Save and Return to exit the menu.  
Installing the sRGB ICM File for Microsoft  
Windows 98, Windows ME, Windows 2000  
and Windows XP  
To complete the following procedure, you must be logged in as an  
administrator or a member of the administrator’s group. If the  
computer is connected to a network, network policy settings may  
prevent you from completing this procedure.  
The sRGB ICM file does not support Windows 95 and Windows  
NT operating systems  
1. Click the Display icon in the Control Panel.  
2. In the Display Properties windows, select the Settings tab,  
then click the Advanced button.  
3. Select the Color Management tab, then click the Add button  
to open the Add Profile Association dialog box.  
4–12  
User’s Guide  
Operating the Monitor  
4. Select the “sRGB Color Space Profile.icm” file, then click  
the Add button  
5. To activate a color profile for your monitor, you must set it as  
the Default Monitor Profile. Select “sRGB Color Space  
Profile,” then click Set as Default button.  
6. Click Apply or OK.  
User’s Guide  
4–13  
A
Troubleshooting  
Solving Common Problems  
The following table lists possible problems, the possible cause of  
each problem, and the recommended solutions.  
Problem  
Possible Cause  
Solution  
Screen is blank.  
Power cord is  
disconnected.  
Connect the power cord.  
Power switch is turned  
off.  
Turn on the power.  
Video cable is  
Connect the video cable  
properly. Refer to Chapter 3,  
Setting Up the Monitor, for  
more information.  
improperly connected.  
Screen blanking utility is  
active.  
Depress any key on the  
keyboard or move the  
mouse to inactivate the  
screen blanking utility.  
User’s Guide  
A–1  
Troubleshooting  
Problem  
Possible Cause  
Solution  
Image appears  
blurred, indistinct, or  
too dark.  
Brightness and contrast  
are too low.  
Press the Minus button on  
the monitor front panel to  
auto-adjust the screen. If that  
doesn’t work, press the  
Menu button to open the  
Basic OSD Menu, and  
adjust the brightness and  
contrast scales as needed.  
Image is not  
centered.  
Position may need  
adjustment.  
Press the Menu button to  
access the Advanced OSD  
menu. Select Image  
Control/Horizontal Position  
or Vertical Position to adjust  
the horizontal or vertical  
position of the image.  
“Check Video  
Cable” is displayed  
on screen.  
Monitor video cable is  
disconnected.  
Connect the 15-pin monitor  
video cable to the VGA  
connector on the computer.  
Be sure that the computer  
power is off while  
connecting the video cable.  
“Input Signal Out of  
Range” is displayed  
on screen.  
Video resolution and/or  
refresh rate are set  
Restart your computer and  
enter Windows Safe Mode  
by pressing the F6 Function  
key when the computer starts  
to boot up. Change your  
settings to a supported  
setting . Restart your  
higher than what your  
monitor supports.  
computer so that the new  
settings take effect.  
Using the Worldwide Web  
Before contacting customer services, refer to the support Web site  
A–2  
User’s Guide  
Troubleshooting  
Preparing to call Technical Support  
If you cannot solve a problem using the troubleshooting tips in  
this section, you may need to call technical support. Have the  
following information available when you call:  
The monitor  
Monitor model number (on front and back panel)  
Serial number for the monitor (on back panel)  
Purchase date on invoice  
Conditions under which the problem occurred  
Error messages received  
Hardware configuration (found on Windows Control Panel)  
Hardware and software you are using  
User’s Guide  
A–3  
B
Technical Specifications  
vf15, FP15, L1502, L1502m, f1523, and  
FP5315 Models  
15-inch Flat Panel Monitors  
Display  
Type  
15.0 inches  
TFT LCD  
38.1 cm  
38.1 cm  
Viewable Image Size  
Tilt  
15.0-inch diagonal  
o
--5 to 30  
Maximum Weight  
(Unpacked)  
9.15 lbs.  
4.15 kg (unpacked)  
Dimensions (includes pedestal)  
Height  
Depth  
Width  
14.01 inches  
7.5 inches  
356 mm  
190 mm  
345 mm  
13.6 inches  
Preferred Mode  
Text Mode  
1024 x 768 (60 Hz)  
720 x 400  
Dot Pitch  
0.297 (H) x 0.297 (W) mm  
30 to 61 kHz  
Horizontal Frequency  
Vertical Refresh Rate  
56 to 76 Hz  
User’s Guide  
B–1  
Technical Specifications  
vf15, FP15, L1502, L1502m, f1523, and  
FP5315 Models  
15-inch Flat Panel Monitors (Continued)  
Environmental Requirements  
Temperature:  
o
o
41to 95 F  
5 to 35 C  
Operating Temperature  
o
o
--4 to 140 F  
--20 to +60 C  
Non-operating Temperature  
Relative Humidity  
20 to 80%  
Altitude:  
Operating  
Non-operating  
0 to 12,000 feet  
0 to 40,000 feet  
0 to 3657.6 m  
0 to12192 m  
Power Source  
100 –- 240 VAC, 50 – 60 Hz  
<40 watts typical  
Power Consumption  
Input Terminals  
15-pin D-type connector with cable included.  
B–2  
User’s Guide  
Technical Specifications  
vf17, FP17, L1702, L1702m, f1723, and  
FP7317 Models  
17-inch Flat Panel Monitors  
Display  
Type  
17.0 inches  
TFT LCD  
43.18 cm  
43.18 cm  
Viewable Image Size  
Tilt  
17.0-inch diagonal  
o
--5 to 30  
Maximum Weight  
(Unpacked)  
13.2 lbs.  
6.0 kg (unpacked)  
Dimensions (include pedestal)  
Height  
Depth  
Width  
15.9 inches  
7.8 inches  
405 mm  
198 mm  
379 mm  
14.9 inches  
Preferred Mode  
Text Mode  
1280 x 1024 (60 Hz)  
720 x 400  
Dot Pitch  
0.264 (H) x 0.264 (W) mm  
30 to 81 kHz  
Horizontal Frequency  
Vertical Refresh Rate  
56 to 76 Hz  
Environmental Requirements  
Temperature:  
o
o
41 to 95 F  
5 to 35 C  
Operating Temperature  
Non-operating Temperature  
o
o
-4 to 140 F  
--20 to +60 C  
Relative Humidity  
Power Source  
20 to 80%  
100 – 240 VAC, 50 – 60 Hz  
User’s Guide  
B–3  
Technical Specifications  
vf17, FP17, L1702, L1702m, f1723, and  
FP7317 Models  
17-inch Flat Panel Monitors (Continued)  
Altitude:  
Operating  
0 to 12,000 feet  
0 to 40,000 feet  
0 to 3657.6 m  
0 to12192 m  
Non-operating  
Power Consumption  
Input Terminal  
<50 watts typical  
15-pin D-type connector with cable included.  
EnterTinhegvidUeosceorntrMolloerdsiegnsal may occasionally call for a mode that  
is not preset if:  
You are not using a standard graphics adapter.  
You are not using a preset mode.  
If this occurs, you may need to readjust the parameters of the  
monitor screen by using the on-screen display. Your changes can  
be made to any or all of these modes and saved in memory. The  
monitor automatically stores the new setting, then recognizes the  
new mode just as it does a preset mode. In addition to the 16  
factory preset modes, there are four user modes that can be  
entered and stored.  
Energy Saver Feature  
When the monitor is in its normal operating mode, the Power  
light is green.  
The monitor also supports a reduced power state. The reduced  
power state is entered into if the monitor detects the absence of  
either the horizontal sync signal and/or the vertical sync signal.  
Upon detecting the absence of these signals, the monitor screen  
blanks, the backlight turns off, and the Power light turns amber.  
B–4  
User’s Guide  
Technical Specifications  
When the monitor is in the reduced power state, the monitor  
utilizes less than 2 watts of power. There is a brief warm up  
period before the monitor returns to its normal operating mode.  
Refer to your computer manual for instructions on setting energy  
saver features (sometimes called power management features).  
The above energy saver feature only works when connected to  
computers that have energy saver features.  
By selecting settings in the monitor’s Energy Saver utility, you  
can also program the monitor to enter into the reduced power  
state at a predetermined time. When the monitor’s Energy Saver  
utility causes the monitor to enter the reduced power state, the  
power light blinks amber.  
User’s Guide  
B–5  
C
Agency Regulatory Notices  
Federal Communications  
Commission Notice  
This equipment has been tested and found to comply with the  
limits for a Class B digital device, pursuant to Part 15 of the  
FCC Rules. These limits are designed to provide reasonable  
protection against harmful interference in a residential  
installation. This equipment generates, uses, and can radiate radio  
frequency energy and, if not installed and used in accordance  
with the instructions, may cause harmful interference to radio  
communications. However, there is no guarantee that interference  
will not occur in a particular installation. If this equipment does  
cause harmful interference to radio or television reception, which  
can be determined by turning the equipment off and on, the user  
is encouraged to try to correct the interference by one or more of  
the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and the  
receiver.  
Connect the equipment into an outlet on a circuit different  
from that to which the receiver is connected.  
Consult the dealer or an experienced radio or television  
technician for help.  
Modifications  
The FCC requires the user to be notified that any changes or  
modifications made to this device that are not expressly approved  
by Hewlett Packard Company may void the user's authority to  
operate the equipment.  
User’s Guide  
C–1  
Agency Regulatory Notices  
Cables  
Connections to this device must be made with shielded cables  
with metallic RFI/EMI connector hoods to maintain compliance  
with FCC Rules and Regulations.  
Declaration of Conformity for  
Products Marked with FCC Logo,  
United States Only  
This device complies with Part 15 of the FCC Rules. Operation is  
subject to the following two conditions: (1) this device may not  
cause harmful interference, and (2) this device must accept any  
interference received, including interference that may cause  
undesired operation.  
For questions regarding your product, contact:  
Hewlett Packard Company  
P. O. Box 692000, Mail Stop 530113  
Houston, Texas 77269-2000  
Or, call1  
1-800- 652-6672  
For questions regarding this FCC declaration, contact:  
Hewlett Packard Company  
P. O. Box 692000, Mail Stop 510101  
Houston, Texas 77269-2000  
Or, call  
(281) 514-3333  
To identify this product, refer to the Part, Series, or Model  
number found on the product.  
C–2  
User’s Guide  
Agency Regulatory Notices  
Canadian Notice  
This Class B digital apparatus meets all requirements of the  
Canadian Interference-Causing Equipment Regulations.  
Avis Canadien  
Cet appareil numérique de la classe B respecte toutes les  
exigences du Règlement sur le matériel brouilleur du Canada.  
European Notice  
Products with the CE Marking comply with both the EMC  
Directive (89/336/EEC) and the Low Voltage Directive  
(73/23/EEC) issued by the Commission of the European  
Community.  
Compliance with these directives implies conformity to the  
following European Norms (in brackets are the equivalent  
international standards):  
EN55022 (CISPR 22) - Electromagnetic Interference  
EN55024 (IEC61000-4-2,3,4,5,6,8,11) - Electromagnetic  
Immunity  
EN61000-3-2 (IEC61000-3-2) – Power Line Harmonics  
EN61000-3-3 (IEC61000-3-3) – Power Line Flicker  
EN60950 (IEC950) - Product Safety  
Japanese Notice  
User’s Guide  
C–3  
Agency Regulatory Notices  
Korean Notice  
EPA Energy Star Compliance  
Monitors that are marked with the Energy Star Logo meet the  
requirements of the EPA Energy Star program. As an Energy Star  
Partner, Hewlett Packard Company has determined that this  
product meets the Energy Star guidelines for energy efficiency.  
Specific details on using the Energy Saving features can be found  
in the energy saver or power management section of the computer  
manual.  
Power Cord Set Requirements  
The monitor power supply is provided with Automatic Line  
Switching (ALS). This feature allows the monitor to operate on  
input voltages between 100-120V or 200-240V.  
The power cord set (flexible cord or wall plug) received with the  
monitor meets the requirements for use in the country where you  
purchased the equipment.  
If you need to obtain a power cord for a different country, you  
should purchase a power cord that is approved for use in that  
country.  
The power cord must be rated for the product and for the voltage  
and current marked on the product's electrical ratings label. The  
voltage and current rating of the cord should be greater than the  
voltage and current rating marked on the product. In addition, the  
cross-sectional area of the wire must be a minimum of 0.75 mm²  
C–4  
User’s Guide  
Agency Regulatory Notices  
or 18AWG, and the length of the cord must be between 6 feet  
(1.8 m) and 12 feet (3.6 m). If you have questions about the type  
of power cord to use, contact your HP authorized service  
provider.  
A power cord should be routed so that it is not likely to be walked  
on or pinched by items placed upon it or against it. Particular  
attention should be paid to the plug, electrical outlet, and the  
point where the cord exits from the product.  
User’s Guide  
C–5  
D
LCD Monitor Quality  
and Pixel Policy  
The TFT monitor uses high-precision technology, manufactured  
according to HP standards, to guarantee trouble-free  
performance. Nevertheless, the display may have cosmetic  
imperfections that appear as small bright or dark spots. This is  
common to all LCD displays used in products supplied by all  
vendors and is not specific to the HP LCD. These imperfections  
are caused by one or more defective pixels or sub-pixels.  
A pixel consists of one red, one green, and one blue  
sub-pixel.  
A defective whole pixel is always turned on (a bright spot on  
a dark background), or it is always off (a dark spot on a bright  
background). The first is the more visible of the two.  
A defective sub-pixel (dot defect) is less visible than a  
defective whole pixel and is small and only visible on a  
specific background.  
The HP display does not have more than:  
3 bright dots.  
5 dark dots.  
5 total bright and dark dots.  
No more than two adjacent (less than 2.5 mm edge-to-edge)  
defective pixels.  
User’s Guide  
D–1  
LCD Monitor Quality and Pixel Policy  
To locate defective pixels, the monitor should be viewed under  
normal operating conditions, in normal operating mode at a  
supported resolution and refresh rate, from a distance of  
approximately 50 cm (16 in.).  
HP expects that, over time, the industry will continue to improve  
its ability to produce LCDs with fewer cosmetic imperfections  
and HP will adjust guidelines as improvements are made.  
D–2  
User’s Guide  

HP Hewlett Packard HP 30 Zr30w S Ips LCD Monitor ZR30w User Manual
Hotpoint Cooktop CH60GTCF User Manual
Hitachi C1459FN User Manual
GE 28031xx4 User Manual
Creda CF50E User Manual
Clarion VMA 5091 VMA5091 User Manual
BT 1300 Executive User Manual
Audiovox DT 911 User Manual
AT T CL84350 User Manual
Adesso AKB 131PB User Manual