Compaq S 900 User Manual

User's Guide  
Compaq S900 Color Monitor  
Notice  
The information in this guide is subject to change without notice.  
COMPAQ COMPUTER CORPORATION SHALL NOT BE LIABLE FOR  
TECHNICAL OR EDITORIAL ERRORS OR OMISSIONS CONTAINED  
HEREIN; NOR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES  
RESULTING FROM THE FURNISHING, PERFORMANCE, OR USE OF  
THIS MATERIAL.  
This guide contains information protected by copyright. No part of this  
guide may be photocopied or reproduced in any form without prior written  
consent from Compaq Computer Corporation.  
1998 Compaq Computer Corporation.  
All rights reserved. Printed in Taiwan.  
Compaq and Deskpro are registered in the U. S. Patent and Trademark  
Office.  
Microsoft, MS-DOS, Windows, Windows NT, and other names of Microsoft  
products referenced herein are trademarks or registered trademarks of  
Microsoft Corporation.  
ENERGY STAR is a U.S. registered mark.  
Product names mentioned herein may be trademarks and/or registered  
trademarks of their respective companies.  
The software described in this guide is furnished under a license agreement  
or nondisclosure agreement. The software may be used or copied only in  
accordance with the terms of the agreement.  
User’s Guide  
Compaq S900 Color Monitor  
Second Edition (September 1998)  
Part Number 360564-002  
Compaq Computer Corporation  
ENGLISH - TABLE OF CONTENTS  
SAFETY INSTRUCTIONS .................................................................................. 2  
INTRODUCTION ................................................................................................ 4  
Package Contents ................................................................................. 5  
Installing or Removing the Tilt/Swivel Base ....................................... 5  
Feature Highlights ................................................................................. 6  
Maximum Compatibility ................................................................. 6  
Latest Screen Technology .............................................................. 6  
Ergonomics Information ................................................................. 6  
Instant Power Saving Solution ....................................................... 6  
Recommended Use of the Monitor ....................................................... 7  
Master Power Reset Switch .................................................................. 7  
CONTROLS AND ADJUSTMENTS ..................................................................... 8  
Front User Controls. .............................................................................. 8  
(1) Menu Key .......................................................................................... 9  
(2) Contrast/Brightness ...................................................................... 10  
Energy Declaration .............................................................................. 11  
TROUBLESHOOTING ....................................................................................... 12  
TECHNICAL INFORMATION ............................................................................ 13  
Specifications ...................................................................................... 13  
Compatibility ....................................................................................... 14  
Pin Assignment ............................................................................. 14  
Appendix  
Agency Regulatory Notices ................................................................... 15  
English - 1  
♦ ♦ ♦  
SAFETY INSTRUCTIONS  
1. Carefully read all of the instructions below and keep the manual for later use.  
2. Please install the swivel base onto this product before using it.  
3. The voltage ratings and the rated frequency are on the overlay centered at  
rear side of this product. Do not connect with any source of other voltage or  
frequency and please follow all warnings and instructions marked on the  
product.  
4. Unplug this product from the wall outlet before cleaning and use a damp cloth  
to clean it. Do not use liquid cleaners or aerosol cleaners.  
5. Do not expose this product to rain or moisture.  
6. Do not place this product on an unstable cart, stand, or table. The product may  
fall, causing serious damage to the product.  
7. Do not block or cover ventilating openings with cloth or other material.  
Neither should this product be placed near or over a radiator or a heat register,  
nor should the product be placed in a built-in installation unless proper  
ventilation is provided.  
8. This product is equipped with a 3-wire grounding type plug. This plug will only  
fit into a grounding-type power outlet. This is a safety feature. If you are  
unable to insert the plug into the outlet, contact your electrician to replace  
your obsolete outlet. Do not defeat the safety purpose of the grounding-type  
plug. Choose a Tandem Blade attachment plug configuration power cord for  
230V AC input.  
Due to the safety requirements of different areas, please select a suitable  
power cord according to the following rules, in addition to the electric rating:  
A. Northern America area: Please select a UL listed and CSA certified  
power cord.  
B. Germany: Please select a VDE certified power cord.  
C. Nordic countries: Please select a power cord certified by SEMKO,  
NEMKO, DEMKO, or FIMKO.  
D. The other areas: Please select a power cord suitable to the local power  
system and power outlet.  
2 - English  
♦ ♦ ♦  
SAFETY INSTRUCTIONS  
Usually a suitable power cord is provided by the manufacturer when this product is  
sold. However, this product is sometimes resold or transported to another area with  
a different power system and safety requirements; please pay attention to the  
selection of a suitable power cord.  
The plug on the power cord is intended to serve as the disconnect device;  
therefore, the socket-outlet should be installed near the equipment and should be  
easily accessible.  
9. Do not allow anything to rest on the power cord. Do not locate this product  
where people can walk on the cord.  
10. Never push objects of any kind into this product through cabinet slots as they  
may touch dangerous voltage points or short out parts that could result in a  
risk of fire or electric shock. Never spill liquid of any kind on the product.  
11. Do not attempt to service this product yourself, as opening or removing covers  
may expose you to dangerous voltage points or other risk. Refer all servicing  
to your Compaq authorized service personnel.  
12. Unplug this product from the wall outlet and refer servicing to Compaq  
authorized service personnel under the following conditions.  
A. When the power cord or plug is damaged or frayed.  
B. If liquid has been spilled into the product.  
C. If the product has been exposed to rain or water.  
D. If the product does not operate normally when operating instructions are  
followed, adjust only those controls that are covered by the operating  
instructions since improper adjustment of other controls may result in  
damage and will often require extensive work by a qualified technician  
to restore the product to normal operation.  
E. If the product has been dropped or the cabinet has been damaged.  
F. If the product exhibits a distinct change in performance, indicating a  
need for service.  
English - 3  
♦ ♦ ♦  
INTRODUCTION  
Introduction  
The monitor is a multiple frequency high-resolution color monitor for PC-compatible  
or Macintosh family and workstation systems. The monitor is equipped with  
microprocessor-based intelligence and multiple frequency scanning capability,  
allowing it to provide maximum compatibility for various system platforms.  
The monitor uses the latest screen technology including a 0.22 mm horizontal dot  
pitch, High Contrast CRT to display crisp text and vivid color graphics with a  
maximum resolution up to 1600 x 1200 pixels. Furthermore, it supports VESA 85Hz  
modes to provide a flicker-free display. The full-function digital control and On-  
Screen Display (OSD) system provide easy adjustment of image geometry and color  
settings for different display modes with the precision of a fixed frequency monitor.  
The design of the monitor is also ergonomically concerned. In addition to the  
friendly controls and user comfort features, the emission level of the electric and  
magnetic fields is kept low to meet the Swedish MPR II standards or TCO 95  
(optional).  
The monitor is also equipped with energy saving functions. It is compatible with the  
VESA power saving standards. The lowest power consumption is less than 8 Watts.  
4 - English  
♦ ♦ ♦  
INTRODUCTION  
Package Contents  
The following lists all of the items included in the monitor package box. Please  
save the original box and packing materials for future transportation or shipment of  
the monitor.  
Front View  
User's Manual  
Rear View  
Power Cord  
Installing or Removing the Tilt/Swivel Base  
1. Turn off the system and all attached peripherals.  
2. Carefully set the monitor upside down.  
Installing the Tilt/Swivel Base:  
1. Align the base with the slots on the bottom of the  
monitor and insert the tilt/swivel base into the slots.  
2. Push the tilt/swivel base firmly toward the front of the  
monitor until the latches click into the locked position.  
Removing the Tilt/Swivel Base:  
1. Squeeze and hold the latches.  
2. Pull the tilt/swivel base to the rear of the monitor and  
lift to remove the base.  
.
English - 5  
♦ ♦ ♦  
INTRODUCTION  
Feature Highlights  
Maximum Compatibility  
• Automatically scans all horizontal frequencies between 30 kHz and 95 kHz,  
and all vertical frequencies between 50 Hz and 160 Hz.  
• Supports multiple operating platforms such as PC-compatible or Macintosh  
computers (with optional adapter).  
• Multiple graphic standards with high refresh rates:  
640 x 480/85 Hz, 800 x 600/85 Hz, 1024 x 768/85 Hz, 1280 x  
1024/85 Hz, 1600 x 1200/75 Hz.  
• Supports wide range of graphics standards including VGA, Super VGA, 8514/  
A, XGA, Mac II 13" (640 x 480), Mac 16" (832 x 624), Mac 21" (1152 x 870),  
as well as all VESA standards.  
Latest Screen Technology  
• Horizontal dot pitch of 0.22 mm High Contrast 19" CRT (48.2 cm) for  
maximum clarity and detailed pictures.  
• Special antireflection, antiglare and antistatic coating of the screen face  
provides better focus, contrast and color performance.  
• Flat and square screen reduces image distortion and glare.  
• Full-feature digital control and multilingual OSD system allows easy  
adjustment of geometry and color. Furthermore, the monitor provides even  
advanced adjustments like trapezoid, parallelogram, side-pin, pin-balance,  
moire and rotation that allow the user to fine-tune the screen image.  
Ergonomics Information  
• Electric and magnetic field emissions are kept low to meet the Swedish  
MPR II standard or TCO 95.  
• Front user controls allow easy access and comfort to adjust the screen  
image to your personal preferences.  
• Horizontal and vertical full-scan capabilities allow you to use the entire  
screen area in most resolutions.  
• A tilt/swivel base for horizontal and vertical adjustments always provides  
the optimum viewing angle.  
Instant Power Saving Solution  
• The monitor is compatible with VESA DPMS (Display Power Management  
Signaling) standard which provides four power saving modes by detecting  
horizontal and vertical sync signals.  
• The monitor consumes 65 W to 130 W depending on the screen contents in  
normal operation; when a power saving mode is activated, it consumes less  
than 15 W in Standby mode, less than 15 W in the Suspend mode and less  
than 8 W in the Off mode.  
6 - English  
♦ ♦ ♦  
INTRODUCTION  
Recommended Use of the Monitor  
When setting up and using the monitor, pay special attention to the following for  
optimum performance:  
• Do not use your monitor against a bright background or where sunlight or  
other light sources will shine directly on the screen.  
• The monitor should be placed just below eye level (10°-15°) for optimum  
viewing.  
• Set the monitor's brightness to match the ambient room light.  
• For optimum focus, the contrast control should not be set to the maximum  
level unless the input signal level is extremely low. Also, the brightness  
control should be set to a point where the overall background area just  
begins to disappear.  
• Allow adequate ventilation around the monitor so that the heat from the  
monitor can properly dissipate.  
• Neither the monitor itself, nor any other heavy objects, should rest on the  
power cord. Damage to the power cord can cause fire or electrical shock.  
• Keep the monitor away from high-capacity transformers, electrical motors,  
or other strong magnetic fields.  
• Your monitor should not be used in damp, dusty, or dirty areas.  
• Handle your monitor with care when transporting it.  
Master Power Reset Switch  
The black Master Power Reset switch on the left side of the back of the monitor is  
installed for technician use when the monitor is being serviced. Be sure this switch  
is turned on after you first install the monitor. Always leave this Power Reset switch  
in the ON position. Do not use this switch to power on and power off the monitor.  
Use the power switch on the front panel to power on and power off the monitor.  
CAUTION  
!
Do not scratch or bump the surface of the CRT with a pen, a  
screwdriver, etc.  
Clean the CRT surface with a lint-free, nonabrasive, soft cloth,  
and do not use a solution or glass cleaner that contains abra-  
sives, alcohol, or an alkaline solution such as ammonia.  
English - 7  
♦ ♦ ♦  
CONTROLS AND ADJUSTMENTS  
Controls and Adjustments  
Once you have installed the monitor for your system, please read the instructions in  
this section which give you some guidelines on how to use the monitor more  
efficiently. It leads you through the various functions of the user controls and  
explains how to adjust the monitor to your personal preference.  
Front User Controls  
4
5
3
1
2
1. MENU KEY  
Displays and selects the "Status," "Position," "Size," "Geometry," "Moire,"  
"Color," and "Language" functions.  
2. CONTROL KEYS  
•Adjusts the parameter of the selected function.  
•Adjusts the contrast or brightness level of the screen.  
3. EXIT/DEGAUSS SWITCH  
Exits OSD window or manually degausses the monitor.  
4. POWER LED INDICATOR  
As long as the monitor is powered, this indicator is lit. In normal operation, it  
lights green. While in power saving mode, the indicator will turn to amber.  
5. POWER SWITCH  
Turns the monitor On and Off.  
Power Save Note: This monitor is equipped with automatic power-  
saving circuitry design that will work with any computer following the  
VESA DPMS detection format, and it meets ENERGY STAR low power  
state definition. When the monitor is first powered on, the power save  
function remains inactive; the power save function is triggered when the  
input signal is cut off by the computer or there is a loss of signal input.  
8 - English  
♦ ♦ ♦  
CONTROLS AND ADJUSTMENTS  
(1) Press the "MENU" key to open the On-Screen menu function. Seven adjustment  
functions will appear on the On-Screen menu.  
Press the "MENU" key to scroll selections from top-down sequence.  
Press "+," "–," " ," or " " to activate the preferred adjustments.  
Status  
Position  
Size  
Geometry  
Moire  
Color  
Language  
A . STATUS:  
1. To display existing timing data of resolution and frequency.  
2. To recall the factory settings of position,size and geometry.  
Status  
Position  
640 x 480  
Size  
H: 31.5 KHz  
V: 60.3  
Geometry  
Moire  
Hz  
• Press the "+" key to select "Recall."  
• Press the "+" key to execute or press the "–"key to cancel the  
instruction.  
Color  
:Recall  
Language  
B. POSITION:  
Status  
Position  
1. Press the "+" or "–" key to reposition the display to the right or  
left.  
Size  
Geometry  
Moire  
Color  
2. Press the " " key to move the entire picture upwards and  
Language  
"
" to move it downwards.  
C . SIZE:  
Status  
Position  
Size  
1. Press the "+" or "–" key to enlarge or reduce the horizontal  
width.  
Geometry  
Moire  
Color  
2. Press the " " key to enlarge the vertical size or " " to reduce  
it.  
Language  
D . GEOMETRY:  
Status  
Position  
1. Press the " " or " " key to select Sidepin, Balance, Keystone,  
Parallel or Rotate.  
2. Press the "+" or "–" key to adjust the picture according to your  
preferences.  
50  
50  
Size  
Geometry  
50  
Moire  
Color  
Language  
50  
50  
Sidepin  
E. MOIRE:  
1. Press the " " or " " key to select the H.Moire or V. Moire.  
2. Press the "+" key to proceed.  
Status  
Position  
Size  
H. Moire  
V. Moire  
Geometry  
Moire  
3. Press the "+" or "–" key for preferred picture.  
:Proceed  
Color  
Language  
H. Moire  
V. Moire  
50  
English - 9  
♦ ♦ ♦  
CONTROLS AND ADJUSTMENTS  
F. C O L O R :  
1. By pressing the " " key, you can select modes 1, 2, 3, or 4.  
Status  
Position  
1
60  
Size  
2
The settings of modes 1,2 and 3 are fixed. Only mode 4 can be  
adjusted by the user.  
70  
Geometry  
3
60  
Moire  
4
Color  
9300°K  
Language  
2. To adjust the settings of mode 4, press the " " key to select of  
R/G/B gain contrast and the " + " key to increase or " – " to  
decrease its density.  
G . L A N G U A G E :  
Status  
Position  
Press the " " or " " key to select between English, German,  
French, Spanish, or Italian language for the OSD menu.  
English  
Size  
Deutsch  
Français  
Geometry  
Moire  
Español  
Color  
Itallano  
Language  
H . CONTRAST/BRIGHTNESS;  
:50  
:100  
When the OSD menu is switched off, proceed as follows to adjust the contrast or brightness:  
a. Press the ' ' or ' ' key to increase or decrease the brightness level.  
b. Press '+' or '–' key to increase or decrease the contrast level of the screen.  
*
*
All adjustments except the color adjustment will be automatically saved.  
The menu block will disappear after 20 seconds without any data changing or press the  
"exit" key directly.  
10 - English  
♦ ♦ ♦  
CONTROLS AND ADJUSTMENTS  
Energy Declaration  
This monitor is equipped with a function for saving energy which supports the VESA  
Display Power Management Signaling (DPMS) standard. This means that the monitor must  
be connected to a computer which also supports the VESA DPMS standard to fulfill the  
requirements of the NUTEK specification 803299/94. The time settings for switching to a  
power saving mode are adjusted from the system unit by software. From the first  
indication of inactivity to power saving position A2, the total time must not be set to more  
than 70 minutes.  
1. VESA Power-Management Proposal  
2. Power Consumption (120/230 Vac)  
VESA DPMSStandard  
NUTEK  
VESAstate LED indicator PowerConsumption  
H.sync V.sync  
Video  
Blank  
Blank  
Blank  
State  
Stand-by  
Suspend  
O ff  
Normaloperation  
On  
Green  
< 130W  
< 15W  
Off  
On  
On  
Off  
Off  
PowerSaving  
PositionA1  
Suspend  
Am ber  
PowerSaving  
PositionA2  
Off  
Amber  
<8W  
Off  
According to TCO guidelines, the optimum TCO readings are measured when brightness  
and contrast are adjusted to their center position.  
English - 11  
♦ ♦ ♦  
TROUBLESHOOTING  
Troubleshooting  
Before calling the Compaq authorized service center, please check that the items below  
are properly connected or set.  
In case of using a nonstandard signal, please check the pin assignments and the signal  
timing of your adapter with the specifications in the section "Pin Assignment Table."  
1. Screen is blank:  
Check to see if the monitor is turned on.  
Check to see if the signal cable and power cable are both connected properly.  
The monitor may be in an energy saving sleep mode or you may have a screen  
blanking utility installed. Press any key on the keyboard or type your password.  
Check to see if the horizontal/vertical frequency is out of range.  
Adjust the Brightness and Contrast controls in the OSD.  
2. "No Signal Input" is displayed on the screen:  
Check to see if the video card is seated correctly in its slot.  
Check to see if the computer is turned on.  
Check to see if the signal cable is connected to the video card in the computer.  
3. Display image is not centered, or is too small or too large:  
Adjust the Position and Size controls in the OSD.  
4. Scrolling or unstable image:  
Check to see if the signal cable is attached to the computer.  
Check the pin assignments and signal timings of the monitor and video card.  
5. Picture is fuzzy:  
Adjust the Brightness and Contrast controls in the OSD.  
Push the Degauss button once.  
CAUTION: Do not press the Degauss button more than once every 20 minutes when  
not switching between modes. Do not hold the button down continuously.  
6. Picture bounces or wave patterns are present on the screen:  
Relocate electrical devices that may be causing electrical interference.  
See the FCC information in the front of this manual.  
7. Display edges are curved inward or outward:  
Adjust the Pincushion control.  
8. Colors are blotchy:  
Press the Degauss button once.  
9. No Plug & Play functionality:  
Check to see if the host system is Plug & Play compatible.  
Check to see if the VGA card is DDC1/DDC2B compatible.  
Check to see if Microsoft Windows 95 is installed and the software key for DDC  
function is enabled.  
Check to see if the manufacturer's original detachable signal cable is being used.  
12 - English  
♦ ♦ ♦  
TECHNICAL INFORMATION  
Specifications  
Color Picture Tube  
48.2 cm / 19" (18" viewable screen size) diagonal  
measurement, 90 degree deflection, High Contrast CRT,  
antiglare, antireflection, antistatic, medium short persistence  
phosphor, dark bulb  
Horizontal Dot Pitch  
Input Signal  
0.22 mm, High Contrast  
Video:  
Sync:  
0.7 Vp-p/75 ohm, analog positive  
Separate Sync.:  
Horizontal Sync.:  
Vertical Sync.:  
TTL Level  
positive/negative  
positive/negative  
TTL Level,  
Composite Sync.:  
positive/negative  
Scan Frequency  
Display Area  
Horizontal: 30 to 95 kHz automatically  
Vertical: 50 to 160 Hz automatically  
Horizontal 350 mm (adjustable)  
Vertical 260 mm (adjustable)  
Max. Resolution  
Display Colors  
Video Bandwidth  
Misconvergence  
Plug & Play  
1600 x 1200 pixel, noninterlaced  
Analog input, unlimited colors  
150 MHz  
Center 0.3 mm, Corner 0.4 mm maximum  
DDC 1 / DDC 2B  
Power Supply  
Power Consumption  
Dimensions  
100-120 VAC/200-240 VAC, 50/60 Hz (automatically)  
130W max.  
18.1(W) × 18.2(H) × 18.5(D) inches  
460(W) × 461(H) × 469(D) mm  
Weight  
57 lbs (26 kgs)G.W., 48.4 lbs (22kgs)N.W.  
Environment  
Operating Temperature:  
0°C to 40°C  
Consideration  
Humidity 20% to 80%  
Storage Temperature:  
–20°C to 60°C  
Humidity 10% to 90%  
Note: Specifications are subject to change without notice.  
English - 13  
♦ ♦ ♦  
TECHNICAL INFORMATION  
Compatibility  
This color monitor supports multiple operating platforms such as PC-compatible  
and Macintosh family computers. This section provides you with detailed  
information on pin assignment of the D-Sub connector and the preset timing chart  
of the prevailing video standards.  
Pin Assignment  
1
6
5
10  
15  
11  
Male Mini D-15 Connector  
Signal  
15 Pin Mini D-Sub  
Red Video  
Green Video  
Blue Video  
Horizontal Sync  
Vertical Sync  
Ground  
1
2
3
13  
14  
4,5,6,7,8,10,11  
No Connection  
SDA (DDC)  
SCL (DDC)  
9
12  
15  
14 - English  
♦ ♦ ♦  
appendix  
Agency Regulatory Notices  
Federal Communications Commission Notice  
This equipment has been tested and found to comply with the  
limits for a Class B digital device, pursuant to Part 15 of the FCC  
Rules. These limits are designed to provide reasonable protection  
against harmful interference in a residential installation. This  
equipment generates, uses, and can radiate radio frequency en-  
ergy and, if not installed and used in accordance with the instruc-  
tions, may cause harmful interference to radio communications.  
However, there is no guarantee that interference will not occur in  
a particular installation. If this equipment does cause harmful  
interference to radio or television reception, which can be deter-  
mined by turning the equipment off and on, the user is encour-  
aged to try to correct the interference by one or more of the  
following measures:  
n Reorient or relocate the receiving antenna.  
n Increase the separation between the equipment and  
the receiver.  
n Connect the equipment into an outlet on a circuit  
different from that to which the receiver is con-  
nected.  
n Consult the dealer or an experienced radio or televi-  
sion technician for help.  
Modifications  
The FCC requires the user to be notified that any changes or modifica-  
tions made to this device that are not expressly approved by Compaq  
Computer Corporation may void the user’s authority to operate the  
equipment.  
Cables  
Connections to this device must be made with shielded cables with  
metallic RFI/EMI connector hoods to maintain compliance with FCC  
Rules and Regulations,  
English - 15  
♦ ♦ ♦  
Declaration of Conformity for products  
marked with the FCC logo - United States only  
This device complies with Part 15 of the FCC Rules. Operation is  
subject to the following two conditions: (1) this device may not cause  
harmful interference, and (2) this device must accept any interference  
received, including interference that may cause undesired operation.  
For questions regarding your product, contact:  
Compaq Computer Corporation  
P. O. Box 692000, Mail Stop 530113  
Houston, Texas 77269-2000  
Or, call 1-800-652-6672 (1-800-OK COMPAQ)  
For questions regarding this FCC declaration, contact:  
Compaq Computer Corporation  
P. O. Box 692000, Mail Stop 510101  
Houston, Texas 77269-2000  
Or, call (281) 514-3333  
To identify this product, refer to the Part, Series, or Model number  
found on the product.  
Canadian Notice  
This Class B digital apparatus meets all requirements of the  
Canadian Interference-Causing Equipment Regulations.  
Avis Canadien  
Cet appareil numérique de la classe B respecte toutes les exigences du  
Règlement sur le matériel brouilleur du Canada.  
German Ergonomics Notice  
Compaq Computers, when tested with the Compaq PE1131 Series  
monitors, were evaluated and found compliant to the requirements of  
ZH 1/618 (German Safety Regulations for Display Work Places in the  
Office Sector).  
16 - English  
♦ ♦ ♦  
EPA ENERGY STAR Compliance  
Monitors that are marked with the ENERGY STAR Logo meet the re-  
quirements of the EPA ENERGY STAR program. As an ENERGY STAR  
Partner, Compaq Computer Corporation has determined that this  
product meets the ENERGY STAR guidelines for energy efficiency.  
Specific details on using the Energy Saving features can be found in  
the energy saver or power management section of the computer  
manual.  
European Notice  
Products with the CE Marking comply with both the EMC Directive  
(89/336/EEC) and the Low Voltage Directive (73/23/EEC) issued by  
the Commission of the European Community.  
Compliance with these directives implies conformity to the following  
European norms:  
n EN55022 (CISPR 22) - Radio Frequency  
Interference  
n EN50082-1 (IEC801-2, IEC801-3, IEC801-4) - Elec-  
tromagnetic Immunity  
n EN60950 (IEC950) - Product Safety  
Japanese Notice  
English - 17  
♦ ♦ ♦  

Hobart ML 126614 User Manual
FUNAI EC520E User Manual
Electrolux EEKG5048 User Manual
DFI VS485 19 User Manual
Cypress CY7C199 User Manual
ClearOne comm MAX Wireless 910 158 276 User Manual
Belkin F8E846 BNDL DB User Manual
Asus BW 14D1XT Internal Blu ray Writer BW 14D1XT User Manual
Alto Shaam PLATINUM ASC 4E User Manual
ADS Technologies USB Instant DVD User Manual