Casio DQ 584B User Manual

MA0507-EA  
Operation Guide DQ-584/584B  
4 HR (MONTH) button  
ILLUSTRATION  
Pressing this button while “TM” is selected by the Mode switch 5 advances the hour setting.  
Pressing this button while “CALENDAR” is selected by the Mode switch 5 advances the month setting.  
5 Mode switch  
NORMAL: For normal use  
AL: For adjusting the alarm setting  
TM: For adjusting the time setting  
CALENDAR: For adjusting the date setting  
6 Alarm Mode selector  
SNZ: Snooze alarm on  
ON: Alarm on  
OFF: Alarm off  
7 °C/°F button  
Press this button to toggle the temperature units between Celsius and Fahrenheit.  
8 Battery  
SETTING THE CLOCK  
1. Slide the Mode switch 5 to  
Press to advance the  
hour setting.  
Press to advance the  
minute setting.  
Press to toggle between  
12-hour and 24-hour  
timekeeping.  
“TM”. This causes the current  
time to flash on the display.  
2. Use the 12 • 24 HR (YEAR)  
button 2, MIN (DATE) button  
3, and HR (MONTH) button 4  
to set the time. Holding down  
the MIN (DATE) button 3 or  
HR (MONTH) button 4  
changes the corresponding  
setting at high speed.  
Make sure you set the correct  
am/pm time if you are using 12-  
hour timekeeping. The PM  
indicator indicates PM times,  
while nothing is indicated for AM  
times.  
The seconds count reverts to 00  
automatically whenever you finish  
adjusting the minute setting.  
3. Slide the Mode switch 5 to  
“CALENDAR”. This causes the  
current date to flash on the  
display.  
PM indicator  
Hour  
Minutes  
A sticker is affixed to the glass of the clock when you purchase it. Be sure to remove the sticker before using the  
clock.  
Depending on the clock model, its configuration may differ somewhat from that shown in the illustration.  
Press to advance the  
month setting.  
Press to advance the  
day setting.  
Press to advance the  
year setting.  
Alarm Off  
Snooze Alarm On  
HR (MONTH) or MIN (DATE)  
button depressed  
PM indicator  
Current temperature  
Snooze on indicator  
Alarm indicator  
4. Use the 12 • 24 HR (YEAR)  
button 2, MIN (DATE) button  
3, and HR (MONTH) button 4  
to set the date. Holding down  
any button advances the  
corresponding setting at high  
speed.  
You can set the year in the range  
of 1990 to 2030.  
Current time  
(Hour, minutes)  
Date  
(month – day)  
Alarm on indicator  
Alarm time  
Year  
Month  
Day  
GENERAL GUIDE  
1 SNOOZE/LIGHT button  
Press this button to illuminate the display for about three seconds.  
Pressing this button while the alarm is sounding stops the alarm.  
5. Slide the Mode switch 5 to “NORMAL”. This will  
cause the figures on the display to stop flashing.  
2 12 • 24 HR (YEAR) button  
Press this button to toggle between 12-hour and 24-hour timekeeping.  
Pressing this button while “CALENDAR” is selected by the Mode switch 5 advances the year setting.  
3 MIN (DATE) button  
Pressing this button while “TM” is selected by the Mode switch 5 advances the minute setting.  
Pressing this button while “CALENDAR” is selected by the Mode switch 5 advances the day setting.  
1

HP Hewlett Packard 1706 User Manual
GE 2 9730 User Manual
Electrolux 66320 K MN User Manual
Dometic DOTRC11B User Manual
Daewoo DTH 21S8 User Manual
Black Box Computer Hardware ACX160 PS User Manual
AZZA Computer Hardware Mainboard User Manual
AMD 1207 User Manual
ALCATEL Mobile Phones IPTOUCH 600 User Manual
Aga Ranges 6 4 Series User Manual