IMPORTANT SAFETY INSTRUCTIONS
TABLE OF CONTENTS
TECHNICAL DETAILS
TABLE OF CONTENTS
PHONE SETTINGS............................................................................................................................ 20
Package Contents
Standard
Digital Enhanced Cordless
6
• 1 Handset (2 with a Twin system, 3 with a Triple system)
• 1 Base Station
TABLE OF CONTENTS
Telecommunication(DECT)
1.88 to 1.9GHz (bandwidth = 20 MHz)
1.728 MHz
IMPORTANT SAFETY INSTRUCTIONS
6.1
6.2
.............................................................................................................................20
............................................................................................................................ 20
6.3 HANDSET SETTINGS ......................................................................................................................... 21
CLOCK SETTINGS
ALARM SETTINGS
Frequency range
Channel bandwidth
Operating range
Operating time
1
INSTALLING YOUR PHONE............................................................................................................... 6
•
1 Mains Power Adapter
BASE SETTINGS
REGISTRATION
6.4
6.5
............................................................................................................................... 23
................................................................................................................................. 25
• 1 Telephone Line Cord
1.1 CONNECTING THE BASE STATION......................................................................................................... 6
1.2 INSTALLING AND CHARGING THE BATTERIES......................................................................................... 6
US ER GUIDE
Big Button 3725
Big Button 3725 Twin
Big Button 3725 Triple
Digital Cordless Telephone with
When using your telephone equipment, basic safety precautions should always be
followed to reduce the risk of fire, electric shock and injury, including the following:
Up to 300m outdoors; up to 50m indoors
• 2 Rechargeable Batteries for each handset
• 1 Charger Pod with mains power adapter for each additional
handset of a multi-handset system
......................................................................................................................... 25
6.6 RESET YOUR PHONE
Standby: 100 hours Talking: 10 hours
.
1)
2)
3)
Read and understand all the instructions.
2
GETTING TO KNOW YOUR PHONE.................................................................................................. 7
Battery charge time:15 hours
7
ANSWERING MACHINE (TAM)......................................................................................................... 26
Follow all warnings and instructions marked on the product.
Unplug this product from the wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a damp cloth for cleaning.
Do not use this product near water (for example, near a bath tub, kitchen sink,
swimming pool).
Do not overload wall outlets and extension cords as this can result in the risk of
fire or electric shock.
Unplug this product from the wall outlet and refer servicing to our Repair
Centre under the following conditions:
• When the power supply cord or plug is damaged or frayed.
• If the product does not operate normally by following the operating instructions.
• If the product has been dropped and the cabinet has been damaged.
• If the product exhibits a distinct change in performance.
NEVER use your cordless telephone outdoors during a thunderstorm - unplug
the base from the telephone line and the mains socket when there are storms
in your area. Damage caused by lightning is not covered by the guarantee.
2.1 OVERVIEW OF THE HANDSET ............................................................................................................... 7
Operating 0 C to 40 C, Storage -20 C to 60 C
Temperature range
Electrical power
7.1 TURN ON/OFF THE ANSWERING MACHINE.......................................................................................... 26
7.2 LISTEN TO THE MESSAGES IN THE ANSWERING MACHINE................................................................... 26
7.3 DELETE ALL MESSAGES IN THE ANSWERING MACHINE ...................................................................... 27
7.4 RECORD MEMO................................................................................................................................. 27
7.5 ANSWERING MACHINE SETTINGS....................................................................................................... 28
7.5.1 SET THE ANSWER MODE ................................................................................................................. 2
7.5.2 SET THE OUTGOING MESSAGE LANGUAGE....................................................................................... 2
7.5.3 RECORD YOUR OWN OUTGOING MESSAGE (OGM).......................................................................... 2
7.5.4 PLAYBACK AND DELETE THE OUTGOING MESSAGE........................................................................... 29
7.5.5 SET THE ANSWER DELAY ................................................................................................................ 2
7.5.6 SET THE MAXIMUM ECORDING TIME OR INCOMING MESSAGE ..................................................... 29
7.5.7 CHANGE THE COMPRESSION RATE .................................................................................................. 31
7.5.8 ACTIVATE REMOTE ACCESS............................................................................................................ 31
2.2
2.3
........................................................................................................... 8
............................................................................................................ 9
................................................................................ 10
2.5 MENU STRUCTURE............................................................................................................................ 11
2.6 TEXT AND DIGIT ENTRY TABLE .......................................................................................................... 11
•
1 User Guide.
DISPLAY ICONS AND SYMBOLS
BASE STATION OVERVIEW
......
Base unit:
Connection and Conditions for use:
D
IGIT- LED DISPLAY
2.4 BASE TWO
INFORMATION
Ten Pao - S005CV0600030 / S005CB0600045
input 100-240VAC 50/60Hz 150mA, output 6VDC 450mA
4)
5)
6)
You can connect your phone to a direct exchange line (DEL) on a local
exchange with its own phone number; to an extension socket
connected to a DEL; or to an extension on an approved compatible
PBX. Do not connect as an extension to a payphone.
The ringer equivalence number (REN) of all equipment (phones, fax
machines, modems, etc.) connected to an exchange line must not add
up to more than 4, otherwise one or more of them may not ring and/or
answer calls correctly. This phone has a REN of 1, and most other
telephones have a REN of 1 unless marked otherwise.
Telephone Answering Machine (TAM)
8
8
8
Charger unit:
3
USING YOUR PHONE....................................................................................................................... 13
Ten Pao - S002CV0600030 / S002CB0600030
input 100-240VAC 50/60Hz 100mA, output 6VDC 300mA
3.1 MAKE A CALL ................................................................................................................................... 13
3.2 MAKE A CALL FROM DIRECT EMORY KEYS (M1-M3)......................................................................... 13
3.3 ANSWER A CALL ............................................................................................................................... 13
3.4 AUDIO BOOST FEATURE.................................................................................................................... 13
3.5 END A CALL...................................................................................................................................... 14
3.6 ADJUST EARPIECE AND HANDSFREE VOLUME ................................................................................... 14
3.7 MUTE A CALL.................................................................................................................................... 14
.................................................................................................... 14
3.9 TURN ON THE KEYPAD LOCK............................................................................................................. 14
3.10 AST RUMBER REDIAL..................................................................................................................... 14
L
3.11 FIND THE HANDSET ......................................................................................................................... 15
3.12 MAKE AN INTERNAL CALL ............................................................................................................... 15
3.12.1 INTERCOM ANOTHER HANDSET...................................................................................................... 15
3.12.2 CALL ALL HANDSETS..................................................................................................................... 15
3.12.3 TRANSFER AN EXTERNAL CALL TO ANOTHER HANDSET ................................................................... 16
3.12.4 MAKE A 3-WAY CONFERENCE CALL................................................................................................ 16
M
9
R
F
Handset Battery Information:
GP – VTHC043C02, Type NiMH (Rechargeable battery)
Voltage Rating 2 x AAA size NiMH 1.2V 400mAh
BYD- H-AAA400BX2, Type NiMH (Rechargeable battery)
7.5.9 CALL SCREENING ..........................................................................................................................
32
REMOTE OPERATION...................................................................................................................... 30
7)
3.8 TURN OFF THE HANDSET R
INGER
8
9
TROUBLESHOOTING....................................................................................................................... 33
DECLARATION OF CONFORMITY................................................................................................. 34
GUARANTEE AND SERVICE............................................................................................... ........... 35
Handset - Base Connection
1) When purchased, all handsets are already registered to the base unit
and should link to it when they are all powered up.
2) To use your cordless handset and base unit together, you must be
able to establish a radio link between them. The signal between the
handset and the base is in accordance with the normal standards for
a DECT phone: Maximum range up to 300 metres outdoors or 50
metres indoors. Be aware that:
Voltage Rating
2 x AAA size NiMH 1.2V 400mAh
Binatone Helpline
(for UK only)
10
8)
9)
Do not use the telephone to report a gas leak in the vicinity of the leak.
Use only the supplied NiMH (Nickel Metal Hydride) batteries! The operation
periods for the handsets are only applicable with the default battery capacities
Monday to Friday
from 9:00am to 5:00pm
Tel: 0845 345 9677
**Please note that all calls are charged at local rate
Caution
10) The use of other battery types or non-rechargeable batteries/primary cells can
Risk of explosion if battery is replaced by an incorrect type
Dispose of used batteries according to the instructions.
4
PRIVATE PHONEBOOK / CONTACTS............................................................................................. 1
6
be dangerous. These may cause interference and/or
damage to the unit or
surroundings.
4.1 ADD A NEW PHONEBOOK ENTRY....................................................................................................... 16
4.2 SEARCH A PHONEBOOK ENTRY ......................................................................................................... 16
4.3 VIEW A PHONEBOOK ENTRY.............................................................................................................. 16
4.4 EDIT A PHONEBOOK ENTRY............................................................................................................... 18
4.5 DELETE A PHONEBOOK ENTRY.......................................................................................................... 18
4.6 DELETE LLENTIRES FROM THE PRIVATE PHONEBOOK...................................................................... 18
A
4.7 CHECK THE PHONEBOOK USAGE....................................................................................................... 18
REMOTE OPERATION...................................................................................................................... 17
The manufacturer will not be held liable for damage arising from such
> Any large metal object, such as a refrigerator, mirror or filing cabinet,
between the handset and the base unit may block the radio signal.
> Other solid structures, like walls, may reduce the signal strength.
> Other electrical equipment may cause interference and/or affect the
range.
3) Do not place close to another telephone, a TV or audio equipment - it
may cause interference.
4) Out of Range warning. If you hear a warning tone during a call,
and/or the sound in the earpiece becomes faint or distorted, you may be
going out of range of the base unit, so move nearer to the base unit
within 20 seconds, otherwise the call may be cut off.
Port specification
non-compliance.
or visit our website: www.binatoneonline.com
11) Do not use third party charging bays. The batteries may be damaged.
The
EN41003.
The port (connected to the telephone line) is aTNV port with respect to EN41003.
port (connected to the mains power supply) is a
SELV port with respect to
12)
13)
Please ensure the batteries are inserted in the correct polarity.
Dispose of batteries safely. Do not immerse them in water, burn them, or put
them where they could get punctured.
THIS EQUIPMENT IS NOT DESIGNED FOR MAKING
EMERGENCY TELEPHONE CALLS WHEN THE POWER
FAILS. ALTERNATIVE ARRANGEMENTS SHOULD BE
MADE FOR ACCESS TO DIAL EMERGENCY SERVICES.
4.8 SET THE FAST DIAL NUMBERS........................................................................................................... 18
Every effort has been made to ensure high standards of reliability for your
5
CALLER DISPLAY (NETWORK DEPENDENT) ............................................................................... 19
5.1 VIEW THE CALL LOG ......................................................................................................................... 19
OG
BB3725 system. However, if something does go wrong, please do not try to
repair it yourself, consult your supplier or the Helpline.
5.2 STORE A CALL L
NUMBER INTO THE PHONEBOOK ......................................................................... 19
5.3 DELETE AN ENTRY IN THE CALL LOG ................................................................................................. 19
5.4 DELETE ALL ENTRIES FROM THE CALL LOG ...................................................................................... 19
5.5 VIEW THE DETAILS OF A CALL LOG ENTRY......................................................................................... 20
Before operating thisset,
please read theseinstructions carefully.
1
2
3
4
5
GETTING TO KNOW YOUR PHONE
Menu Structure
GETTING TO KNOW YOUR PHONE
GETTING TO KNOW YOUR PHONE
GETTING TO KNOW YOUR PHONE
2.5
GETTING TO KNOW YOUR PHONE
GETTING TO KNOW YOUR PHONE
to go to CONTACTS, the first option in the menu list.
In idle mode, press <MENU/OK>
Refer to the
2.
VOLUME UP (+)
On when the handset ringer is switched off.
Steady on when an alarm is set.
Flashes when the alarm time has been reached.
On when the keypad is locked.
following
for the menu structure.
2
GETTING TO KNOW YOURPHONE
Increase (+) speaker volume during message playback.
8.
9.
MICROPHONE
TALK ON/SPEAKERPHONE
1 INSTALLING YOUR PHONE
Press <UP> or <DOWN> to go to other options in the menu list.
Press <MENU/OK> to enter a sub-menu or function.
Press <C> to go back to the previous level.
3.
TAM ON/OFF
2
2.1
1.
GETTING TO KNOW YOUR PHONE
In idle / predialing mode : Press to make a call. Presa again to
turn on the speakerphone.
In Redial list / Call List / Contacts entry: Press to make a call
to the selected entry in the list. Press again to turn on the
speakerphone.
Press to turn on the answering machine.
Press again to turn off the answering machine.
SKIP FORWARD
Overview of the Handset
UP/ DOWN
1.1
Connecting the base station
On when you have a new Voice Mail message. (This is a caller display
service and is not usually available from UK network providers.)
<UP/DOWN>
4.
5.
12
13
During a call: Press to increase or decrease the earpiece
volume.
M1/M2/M3 - DIRECT MEMORY KEYS
In idle mode: Press and hold to dial the stored number.
1)
2)
Plug the power adapter
into the base station.
& line cord
Press to skip the current message and play the next message.
<UP/
OWN>
<UP/
DOWN>
<UP/
DOWN>
<UP/
DOWN>
<UP/
DOWN>
<UP/
DOWN>
Key Press
<MENU >
Indicates when there are more characters or numbers in front of
those being displayed.
Indicates when there are more characters or numbers after those
being displayed.
D
2.
3.
PLAY/STOP
Press to play the message.
During ringing: Press to answer a call. Press again to answer
with speakerphone.
Plug the power adapter into a 230Vac, 50Hz mains
socket, & the other end of the line cord into your
Main
Menu
CONTACTS
Review
menu contacts list
Under a
CALL
LOG
BS SET
HS SET
CLOCK
ALARM REGISTER DEFAULT TAM
CLEAR /BACK/MUTE
Press again to stop the message playback.
SKIP BACKWARD
Press to repeat playing the current message from the beginning. Press twice to skip
backward to the previous message.
VOLUME DOWN (-)
Decrease (-) speaker volume during message playback.
PAGE
Press the Page on the base station to page your registered handset(s).
Press and hold to start registration process.
11
10. MENU/OK
In idle mode: Press to access the main menu
In main menu mode: Press to go back to idle screen.
In sub-menu mode: Press to go back to previous level.
In sub-menu mode: Press and hold to go back to idle screen.
In editing / predialing mode: Press to clear a character / digit.
In editing / predialing mode: Press and hold to delete all
the characters / digits.
telephone line
socket.
6.
Sub
Review
Call Log
Under a
selected
Call Log
entry:
STORE
DELETE
DEL ALL
DETAILS
CATEGO
RY
RINGER
TONE
EQLIZER
DATE FMT
TIME FMT
SET TIME
SET DATE
ON
OFF
PLAYBACK
DEL ALL
1
2
RINGER
RING VOL
DEL HS
DIALMODE
FLASH
Full battery power level.
In sub-menu mode: Press to confirm the selection
During a call: Press to access Intercom/ Phonebook/ Redial
List/ Call Log
MEMO
ON/OFF
Warning: Always use the line cord provided in the box.
Contacts
entry:
SEL BASE
2/3 battery power level.
work.
Other line cords may not be compatible and may not
SETTINGS
ANS MODE
LANGUAGE
OGM SET
ANS DLAY
REC TIME
REMOTE
COMPRESS
CHG PIN
7.
8.
LANGUAGE
HS NAME
DISPLAY
AUTO ANS
MEM KEY
MAILBOX
ADD
VIEW
EDIT
DELETE
DEL ALL
CAPACITY
FASTDIAL
1/3 battery power level.
Warning: Only use the power adapter supplied. Others
will result in non-compliance with the safety
specification EN60950, and will invalidate any approval
given with this apparatus.
CHG PIN
11. AMPLIFY
During a call: Press to turn on or off the audio boost. (Only in Handset earpiece mode)
12. LED
3
4
5
6
10
Flashes when low battery power level is detected, needs charging.
Cycle when, battery is charging.
During a call: Press to mute / unmute the microphone.
In idle mode: Press to intercom another handset.
Steadily on when audio boost is turned on.
Flashes when incoming call.
4.
5.
6.
UP/CALL LOG
9
2.4 Base Two Digit-LED Display Information
In idle mode: Press to access the call log.
In menu mode: Press to scroll up the menu items.
In Contacts list / Redial list / Call List: Press to scroll up
the list.
Warning: The Base unit needs mains power for normal
operation, not just for charging the handset batteries.
2.3
Base Station Overview
13. EARPIECE
0F-> -- Displayed when the answering machine is turned OFF
0n-> XX Displayed when the answering machine is turned ON where XX is number of
messages in TAM memory.
2.6
Text and Digit Entry Table
The following tables show you where each letter and punctuation character can be found, by
using repeatedpresses of the alphanumeric keypad.
This will be helpful when storing a name in the contacts and renaming your handset.
In editing mode, a cursor is displayed to indicate the current text entry position. It is positioned
at the right of the last character entered.
2.2 Display Icons and Symbols
DOWN/REDIAL LIST
1.2
Installing and charging the batteries
The screen display gives you information on the current status of the telephone.
7
00
XX
ZZ
Steady ON: No voice messages in the TAM.
In idle mode: Press to access the redial list.
In menu mode: Press to scroll down the menu items.
In Contacts list / Redial list / Call List: Press to scroll down
the list.
1)
2)
Slide open the battery compartment cover.
Place the 2 batteries with the correct polarity,
8
7
Flashing: There are XX new messages recorded where XX is from 01 to 59.
Steady ON: There are ZZ old messages in the TAM memory and no new
messages.
as shown.
Writing Tips:
3)
4)
Slide the battery compartment cover back.
TALK OFF
1. Once a character is selected, the cursor will move to the next position after a short pause.
2. You can move the cursor within the text with the <UP/DOWN> keys to amend the text entry.
3. Press <C> to delete the last character.
During a call: Press to end a call and go back to idle mode.
In menu / editing mode: Press to go back to previous menu.
In menu / editing mode: Press and hold to go back to idle
screen.
In idle mode: Press and hold to power off the handset.
In idle mode (when the handset is powered off): Press and
hold to power on the handset.
XX/FF Flashing XX alternately with FF: There are XX new voice messages recorded and
the TAM memory is full.
Put the handset on the base and charge for
8
1
2
15 hours before first time use.
beeps when charging starts.
The handset
4. Press and hold <C> to delete the entire text string.
FF
Flashing FF: The TAM memory is full and there are no new messages.
2.6.1 English Character Set
- - /XX Flashing XX alternately with - -: The Time/Date is not set and there are XX new
messages recorded.
Steady on when the handset is within range of the base.
Flashes when the handset is in marginal range of the base.
Off when out of range of the base or cannot communicate with the base.
Steady on when a call is in progress.
Flashes when there is an incoming call.
Warning: Only use AAA size NiMH rechargeable batteries.
Alphanumeric Editing
(For contacts name editing and renaming handset)
Number Editing
(For phone number editing,
date/time editing)
3
Key
- -
Flashing - -: The Time/Date is not set and there are no new messages recorded.
XX Steady ON: Playing the current XX old recorded message.
1.3 If you have a Broadband Line
7.
ALPHANUMERIC KEYPAD, * (STAR), # (HASH)
Press to insert a digit / character / * / #
XX
If you connect your telephone to a line with a broadband connection, you
will need to insert a micro-filter between the telephone and the telephone
line, otherwise you may get interference between the telephone and the
broadband, which could cause problems.
In a home with broadband, every telephone must have a micro-filter
connected, not just the one at the telephone point that your modem is
connected to.
Key
press
1st
2nd
3rd
4th
5th
6th
7th
8th
9th
10th
1-9 keys in idle mode: Press and hold to dial out pre-stored fast-key memories.
* key in idle mode: Press and hold to enable or disable the
keypad lock.
XX Flashing: Playing the current XX new recorded incoming message.
Steady ON: Playing the current outgoing message (OGM) where A1 is the Answer
& Record OGM and A2 is the Answer Only OGM.
1
2
3
4
5
6
space
-
1
C
F
I
L
O
1
2
3
4
5
6
On when the speakerphone is turned on.
A
D
G
J
B
E
H
K
N
2
3
4
5
6
A1/A2
Steady on when an intercom call is in progress.
Flashes during intercom ringing.
* key during a call (in Pulse mode): Press to switch to tone
mode.
6
5
4
XX/An Flashing XX alternately with An:
message.
Currently recording the new XX incoming
# key during a call: Press and hold to insert a recall (R) signal (also called flash).
# key in Idle mode: Press and hold to turn on / off the handset ringer.
0 key in idle / predialing / number editing mode: Press and
hold to insert a pause.
M
Steady on when the telephone answering machine (TAM) is turned on.
Flashes when new TAM messages are received.
1.
DELETE
7
P
Q
R
S
7
9
7
8
9
0
*
T
W
0
*
U
X
V
Y
8
Z
8
9
Press once to delete the message during playback.
Press and hold to delete all the messages.
Note: New voice messages will not be deleted.
rA
Flashing: Remote access is in progress
from a handset or via the external line.
Steady ON: Indicates the current volume level where X is from 1 to 8.
10
On when a new TAM message is playing or a new call is viewed in
0, P (Pause)
*
#
If you need more broadband micro-filters, contact your broadband provider.
LX
?
‘
/
,
\
-
(
.
)
&
# key in Call Log mode: Press to review caller’s number if applicable.
the Call Log.
#
#
6
7
8
9
11
GETTING TO KNOW YOUR PHONE
GETTING TO KNOW YOUR PHONE
USING YOUR PHONE
USING YOUR PHONE
CONTACTS PHONEBOOK
3.12.3 Transfer an External Call to another handset
1. To turn on the audio boost feature, press <AMPLIFY> at any time during a call. The handset top
indicator turns on.
2. When the audio boost feature is activated, press <Slide UP/DOWN> to increase or decrease the
earpiece volume within the specific frequency range set in Equalizer. See section 7.3.5 for more details.
3. To turn off the audio boost feature and return the earpiece volume back to normal, press <AMPLIFY>
again and the handset top indicator light turns off.
3
USING YOUR PHONE
Make a Call
3. Press <MENU/OK> and then enter the name you want to use in your Contacts list.
4. Press <MENU/OK> and then modify the number, if necessary.
5. Press <MENU/OK> to show RING 1.
6. Press <UP/DOWN> to browse the ring tone list. The respective ring tone will be played
when browsing the ring tone list. (Note: the selected ring tone will only be played if you
subscribe to Caller Display and the incoming number matches the stored number.)
2.6.4 Greek Character Set
During an external call:
1. Press <MENU/OK> and <UP/DOWN> to select INTERCOM.
3.1
3.1.1 Preparatory Dialling
2. Press
<MENU/OK> to show all the other registered handset numbers, plus "9".
Alphanumeric Editing
(For contacts name editing and renaming handset)
Number Editing
(For phone number editing,
date/time editing)
Enter the phone number and press <TALK ON/SPEAKERPHONE> to dial the number, press it again to
turn on the speakerphone.
When entering the number, if you make a mistake, press <C> to delete digits.
Enter the number for the handset you want to transfer the call to.
- The audio boost feature will be turned off automatically when the call is ended.
3. The external call is put on hold automatically and the called handset rings.
4. Press <TALK ON/SPEAKERPHONE> on the called handset to establish an internal call.
3.1.2 Direct Dialling
3.5
End a Call
7. Press <MENU/OK> to confirm the selected ring tone and to save the entry.
Key
press
1st
2nd
3rd
4th
5th
6th
7th
8th
9th
10th
Press <TALK ON/SPEAKERPHONE> to connect to the line and then enter the phone number. ( Note: if
you enter a wrong digit you cannot correct it with the <C> key.) Press <TALK ON/SPEAKERPHONE>
again to turn on the speakerphone.
During a call connection, press <TALK OFF> to end the call.
OR
Put the handset on the base station or charging cradle to end the call.
15
5. Press <TALK OFF> on the calling handset or put the calling handset on the charging cradle to end
the current call with the external party.
3.10.3 Delete a Redial Number
1
2
3
4
5
6
7
8
9
0
*
SP
Α
Δ
Η
Κ
Ν
Π
Τ
-
1
Γ
Ζ
Ι
Μ
Ο
Σ
Φ
Ω
1
2
3
4
5
6
7
8
Β
Ε
Θ
Λ
Ξ
Ρ
Υ
Ψ
2
1. Follow Steps 1 and 2 in section 3.10.1.
2. Press <MENU/OK> and <UP/DOWN> to select DELETE.
3. Press <MENU/OK> to confirm and the entry will be deleted.
6. The external call is transferred to the called handset.
3
4
5
6
7
8
9
3.6
Adjust Earpiece and Handsfree Volume
3.1.3 Call from the Contacts List
Press <MENU/OK> to access the contacts list and press <UP/DOWN> to select the desired phonebook
entry.
Press <TALKON/SPEAKERPHONE> to dial out to the selected entry
speakerphone.
Note: If the other handset has not answered the intercom call, you can stop the intercom and
return to the external call by pressing <TALK OFF> at any time.
If the other handset does not answer the intercom call within 30 seconds, the intercom will stop
and you will return to the external call automatically.
There are 5 levels (VOLUME 1 to VOLUME 5) to choose from for each of the earpiece and
handsfree volumes.
3.10.4 Delete all Redial List entries.
1. Follow Steps 1 and 2 in section 3.10.1.
2. Press <MENU/OK> and <UP/DOWN> to select DEL ALL
3. Press <MENU/OK> to display CONFIRM?
. Press it again to turn on the
During a call:
Χ
0
*
9
Press <UP/DOWN> to select volume 1-5. The current setting is shown.
When you end the call, the setting will remain at the last selected level.
3.12.4 Make a 3-way Conference Call
0, P (Pause)
*
3.1.4 Call from the Call Log
(
)
*
?
/
\
The conference call feature allows one external call to be shared with two handsets (in intercom). The
three parties can share the conversation and no additional network subscription is required.
During an external call:
Press <UP> to access the call log and press <UP/DOWN> to select the desired call log entry. Press
<TALK ON/SPEAKERPHONE> to dial out to the selected call log entry. Press it again to turn on the
speakerphone.
4. Press
<MENU/OK> again to confirm.
All entries will be deleted and the display will show EMPTY.
3.7
Mute a Call
#
#
‘
,
-
.
&
#
You can talk to someone nearby without letting the caller hear you during a call.
During a call:
1. Follow Steps 1 to 4 in section 3.12.3.
3.11 Find the Handset
2.6.5 Russian Character Set
Alternatively, press <MENU/OK> and <UP/DOWN> to access the call log from the main menu.
Press <
hear you.
Press <
> to mute the microphone and “MUTED” will display on the screen. Your caller cannot
2. Press and hold the <*> key on the calling handset to establish the conference call.
Either handset can exit the conf erence by pressing <TALK OFF>, leaving the other handset still
connected to the external call.
You can locate the handset by pressing <PAGE> on the base station. All the handsets registered to
the base will produce the paging tone and show “PAGING” on the screen. You can stop the paging
by pressing <TALK ON/SPEAKERPHONE> / <TALK OFF> / <C> on any handset or <PAGE> on the
base again.
Note: If there is an incoming call during paging, the phone will ring with the incoming call instead of
paging.
3.1.5 Call from the redial list
Alphanumeric Editing
Number Editing
Press <DOWN> to access the redial list and press <UP/DOWN> to select the desired redial number.
Press <TALK ON/SPEAKERPHONE> to dial out to the selected redial number. Press it again to turn on
the speakerphone.
(For contacts name editing and renaming handset)
(For phone number editing,
date/time editing)
> again to unmute the microphone.
3.8
To Turn the Handset Ringer Off
4
PRIVATE PHONEBOOK-CONTACTS
In idle mode, press and hold the <#> key to turn off the handset ringer. The ringer off icon <
will be displayed.
When the ringer is off, press and hold the <#> key to turn on the handset ringer. The ringer off icon
>
Each handset can store up to 20 private phonebook entries with names and numbers. Each
phonebook entry can have a maximum of 20 digits for the phone number and 8 characters for the
name. You can also select different ringtones for your phonebook entries. (Note: the different
ringtones only play if you subscribe to Caller Display andthe incoming number matches the stored
number.)
Key
press
1st
2nd
3rd
4th
5th
6th
7th
8th
9th
10th
•
3.1.6 Call timer
3.12
Make an Internal Call
Your handset automatically times the duration of every call. The call timer
is displayed as soon as you
screen for 5 seconds after the end of
1
2
3
4
5
6
7
8
9
0
SP
А
Д
И
М
Р
Ф
Ш
Ь
-
Б
Е
Й
Н
С
Х
Щ
Э
1
В
Ж
К
О
Т
Ц
Ъ
Ю
1
2
3
4
5
6
7
8
This feature is only applicable when there are at least two registered handsets. It allows you to make
internal calls, transfer external calls from one handset to another handset and make conference calls.
If the called handset is not answered within 60 seconds, the called handset will stop ringing and the
calling handset will return to standby mode.
call or 15 seconds after dialling and remains on the,
answer a
a call.
<
> will turn off.
Г
2
3
4
5
6
7
8
9
З
Л
П
У
Ч
Ы
Я
3.9
Turn on the Keypad Lock
It is shown in hours, minutes and seconds format (HH:MM:SS).
In idle mode, press and hold the <*> key to turn on the keypad lock. The keypad lock icon “
will be displayed.
Note: You can still use the <TALK ON> key to answer a call when the handset is ringing.
”
Phonebook entries are stored alphabetically by name.
3.2
Make a call from direct memory keys (M1-M3)
4.1
Add a New Contacts Entry
Note: If only one handset is registered to the base station, when <C/MUTE/INT> is pressed, it will
display “FAILED”.
A direct memory key, M1, M2 or M3 must be programmed with a number before it can be
used. Please see section 6.3.11 for details.
1. From idle model, press <MENU/OK> to show CONTACTS and then press <MENU/OK> to enter
the contacts list.
In ke pad lock mode, press and hold the <*> key to turn off the keypad lock. The keypad lock icon
9
In idle, press and hold <M1>/<M2>/<M3> to dial the number pre-stored into the respective key.
OR
Press <TALK ON/SPEAKERPHONE>, and then press and hold <M1>/<M2>/<M3> to dial the number
pre-stored into the respective key.
- If no number is stored, you will hear a double beeps tone.
2. Press <MENU/OK> to show ADD.
3. Press <MENU/OK> and then to enter the name.
4. Press <MENU/OK> and then to enter the number.
5. Press <MENU/OK> and <UP/DOWN> to select the desired ringtone for your phonebook entry.
6. Press <MENU/OK> to store the phonebook entry.
“
” will turn off.
Redial the last number
3.12.1 Intercom Another Handset
0
*
#
0, P (Pause)
*
#
(
)
*
*
*
‘
?
-
/
.
\
3.10
1. In idle mode, press <C/MUTE/INT> and all the other registered handset numbers will display,
alone with a “9”.
#
,
&
You can redial any of the 5 last numbers called. If you have stored a name in the phonebook to go
with the number, shows a name will be displayed instead. The most recent last number will display
at the top of the redial list.
2. Enter the
number of the handset that you want to call, or enter <9> to call all handsets.
3. The called handset rings. Press <TALK ON/SPEAKERPHONE> on the called handset to establish
the internal call.
4.2
Search for a Contacts Entry
3.3
Answer a Call
3.10.1 Redial a Number from the Redial List
If the handset is not on the base or a charging cradle:
When the phone rings, press <TALK ON/SPEAKERPHONE> to answer a call, press it again to turn on
the speakerphone.
1. From idle model, press <MENU/OK> to show CONTACTS and then press <MENU/OK> to enter
the contacts list.
Note: If only two handsets are registered to the base station, pressing <C/MUTE/INT> will call the
other handset immediately.
Note: If there is an external call while you are on an intercom call, you'll hear warning beeps, and
will have toend the intercom call before you can answer the external call.
3.12.2 Call All Handsets
1. In idle mode, press <DOWN> to access the redial list.
Note: If the redial entry shows a name, press the <#> key to view the number.
2. Press <UP/DOWN> to browse the redial list.
3. Press <TALK ON/SPEAKERPHONE> to dial the selected redial number.
Note: If there are no numbers in the redial list, the display shows “EMPTY”.
2. Enter the first
letter of the name using the alphanumeric keys (e.g. if it begins with C, press the
If the handset is on the base or charging cradle and if AUTO ANS is set to ON: when the phone rings,
2 key three times), and then press <UP/DOWN> to scroll to the entry you want.
pick up the handset to answer
the call automatically, without having to press any button.
4.3
View a Contacts Entry
1. From idle model, press <MENU/OK> to show CONTACTS and then press <MENU/OK> to enter
the contacts list.
2. Press <UP/DOWN> to select the desired contact entry.
3. Press <MENU/OK> and <UP/DOWN> to select VIEW.
3.4
Audio Boost Feature
1. In idle mode, press <CLEAR/MUTE/INT> and the registered handset numbers will display.
2. Press <9> to ring to all registered handsets.
3.10.2 Store a Redial Number into your Contacts list
The audio boost feature allows you to amplify the handset earpiece volume to compensate for the ear’s
limited sensitivity.
1. Follow Steps 1 and 2 in section 3.10.1.
2. Press <MENU/OK> and <UP/DOWN> to select STORE.
4. Press <MENU/OK> and <UP/DOWN> to review the name, number and melody of the selected
1
7
phonebook entry.
12
13
14
15
16
|