Package contents
The package contains the following items:
• 1 Handset
• 1 Base station
• 1 Mains power adapter
• 1 Telephone line cord
• 2 AAA rechargeable batteries
• 1 User manual
Note: If you have a Twin, Triple or Quad system, you will also have the requisite
extra handset(s) and batteries, and a charger pod for each extra handset.
TECHNICAL DETAILS
TABLE OF CONTENTS
1
IMPORTANT SAFETY INSTRUCTIONS
Standard
Digital Enhanced Cordless
When using your telephone equipment, basic safety precautions should always
be followed to reduce the risk of fire, electric shock and injury, including the
following:
Telecommunication (DECT)
1
2
IMPORTANT SAFETY INSTRUCTIONS ..........................................................
3
5
PRIVATE PHONEBOOK...................................................................................14
Frequency range
Channel bandwidth
Operating range
1.88 to 1.9 GHz (bandwidth = 20 MHz)
5.1 ADD A NEW PHONEBOOK ENTRY ...........................................................................14
5.2 SEARCH FOR A PHONEBOOK ENTRY ...................................................................14
5.3 VIEW A PHONEBOOK ENTRY...................................................................................14
5.4 EDIT A PHONEBOOK ENTRY....................................................................................15
5.5 DELETE A PHONEBOOK ENTRY..............................................................................15
5.6 DELETEALLPHONEBOOKENTRIES .........................................................................15
5.7 CHECK THE PHONEBOOK USAGE ..........................................................................15
1.728 MHz
INSTALLING YOUR PHONE ............................................................................5
1) Read and understand all the instructions.
US ER GUIDE
Up to 300m outdoors;
up to 50m indoors
Talking: 10 hours
2) Follow all warnings and instructions marked on the product.
2.1 CONNECTING THE BASE STATION.......................................................................... 5
2.2 INSTALLING AND CHARGING THE BATTERIES...................................................... 5
Solas 1505
Operating time
Standby: 100 hours,
3) Unplug this product from the wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a damp cloth for cleaning.
Solas 1505 Twin
Solas 1505 Triple
Digital Cordless Te
Battery charge time:15 hours
3
GETTING TO KNOW YOUR PHONE................................................................6
Temperature range Operating 0 C to 40 C, Storage -20 C to 60 C
4) Keep your phone away from hot, humid conditions or strong sunlight,
Base unit:
Connection and Conditions for use:
Electrical power
near water (for example, near
and don't let it get wet or use this product
6
CALLER DISPLAY (NETWORK DEPENDENT) ..............................................16
3.1 HANDSET OVERVIEW ................................................................................................ 6
3.2 BASE STATION OVERVIEW.......................................................................................
3.3 DISPLAY ICONS AND SYMBOLS............................................................................... 7
3.4 MENU STRUCTURE ....................................................................................................
3.5 TEXT AND DIGIT ENTRY TABLE ................................................................................ 9
3.5.1 CHARACTER SET.....................................................................................................
7
TenPao - S004LB0600030/S004LV0600030 -
input 100-240VAC 50/60Hz 150mA, output 6VDC 300mA
a bath tub, kitchen sink, swimming pool).
You can connect your phone to a direct exchange line (DEL) on a local
exchange with its own phone number; to an extension socket connected to a
DEL; or to an extension on an approved compatible PBX. Do not connect as an
extension to a payphone.
6.1 VIEW THE CALL LIST.................................................................................................16
6.2 STORE A CALL LIST NUMBER INTO THE PHONEBOOK ......................................16
6.3 DELETE AN ENTRY IN THE CALL LIST....................................................................17
6.4 DELETE ALL CALL LIST ENTRIES ...........................................................................17
5) Do not overload wall outlets and extension cords as this can result in the risk
of fire or electric shock.
8
Charger unit:
TenPao - S004LB0600030 / S004LV0600030 -
input 100-240VAC 50/60Hz 150mA, output 6VDC 300mA
9
6) Unplug this product from the wall outlet and refer servicing to our Repair
Centre under the following conditions:
4
USING YOUR PHONE .....................................................................................10
The ringer equivalence number (REN) of all equipment (phones, fax machines,
modems, etc.) connected to an exchange line must not add up to more than 4,
otherwise one or more of them may not ring and/or answer calls correctly. This
phone has a REN of 1, and most other elephones have a REN of 1 unless
marked otherwise.
7
PHONE SETTINGS...........................................................................................18
Battery Information
GPI - VT40AAAHC 2 x 1.2V AAA size 400mAh NiMH
BYD - H-AAA400A 2 x 1.2V AAA size 400mAh NiMH
CORUN- NI-MHAAAJ400, Type NiMH (Rechargeable battery)
Voltage Rating 400mAh ,2 X 1.2V AAA Size
• When the power supply cord or plug is damaged or frayed.
• If the product does not operate normally by following the operating instructions.
• If the product has been dropped and the cabinet has been damaged.
• If the product exhibits a distinct change in performance.
4.1 MAKE A CALL............................................................................................................10
7.1 DATE AND TIME SETTINGS .......................................................................................18
7.1.1 CHANGE THE DATE FORMAT .................................................................................18
7.1.2 CHANGE THE TIME FORMAT ..................................................................................18
7.1.3 SET THE TIME...........................................................................................................18
7.1.4 SET THE DATE..........................................................................................................18
7.2 ALARM SETTINGS .....................................................................................................19
7.2.1 TURN ON/OFF THE ALARM .....................................................................................19
7.2.2 SET THE ALARM TIME .............................................................................................19
7.3 HANDSET SETTINGS .................................................................................................19
7.3.1 SET THE RINGER MELODY FOR INTERNAL CALLS .............................................19
7.3.2 SET THE RINGER MELODY FOR EXTERNAL CALLS ............................................20
7.3.3 SET THE RINGER VOLUME .....................................................................................20
7.3.4 SET ALERT TONES...................................................................................................20
7.3.5 SET THE HANDSET LANGUAGE .............................................................................20
7.3.6 RENAME THE HANDSET..........................................................................................21
7.3.7 CHOOSE THE INFORMATION TO BE DISPLAYED IN IDLE ...................................21
7.3.8 SET THE AUTO ANSWER ........................................................................................21
7.4 BASE SETTINGS .........................................................................................................21
7.4.1 DE-REGISTER A HANDSET .....................................................................................21
7.4.2 CHANGE THE DIAL MODE .......................................................................................22
7.4.3 CHANGE THE FLASH (RECALL)TIME .....................................................................22
7.4.4 CHANGE THE SYSTEM PIN CODE .........................................................................22
7.5 REGISTRATION ..........................................................................................................23
7.6 RESET YOUR PHONE ................................................................................................23
4.1.1 PREPARATORY DIALLING......................................................................................10
4.1.2 DIRECT DIALLING....................................................................................................10
4.1.3 CALL FROM THE PHONEBOOK .............................................................................10
4.1.4 CALL FROM THE CALL LIST(ONLY AVAILABLE WITH CALLER DISPLAY) .........10
4.1.5 CALL FROM THE REDIAL LIST ...............................................................................10
4.1.6 CALL TIMER .............................................................................................................10
4.2 ANSWER A CALL ......................................................................................................10
4.3 END A CALL ...............................................................................................................11
4.4 ADJUST EARPIECE VOLUME ..................................................................................11
4.5 MUTE A CALL.............................................................................................................11
4.6 TURN OFF HANDSET RINGER .................................................................................11
4.7 TURN ON THE KEYPAD LOCK.................................................................................11
4.8 REDIAL THE LAST NUMBER....................................................................................11
4.8.1 REDIAL A NUMBER FROM THE REDIAL LIST .......................................................11
4.8.2 STORE A REDIAL NUMBER INTO THE PHONEBOOK ..........................................12
4.8.3 DELETE A REDIAL NUMBER ..................................................................................12
4.8.4 DELETE ALL REDIAL LIST ENTRIES ..................................................................12
4.9 FIND THE HANDSET..................................................................................................12
4.10 MAKE AN INTERNAL CALL(FOR MULTI-HANDSET VERSIONS ONLY ) .................12
7) NEVER use your phone outdoors during a thunderstorm-unplug the
base from the telephone line and the mains socket when there are storms
in your area. Damage caused by lightning is not covered by the guarantee.
Handset - Base Connection
1) When purchased, all handsets are already registered to the base unit and should
link to it when they are all powered up.
Caution
Risk of explosion if battery is replaced by an incorrect type
Dispose of used batteries according to the instructions.
8) Do not use the telephone to report a gas leak in the vicinity of the leak.
2) To use your cordless handset and base unit together, you must be able to
establish a radio link between them. The signal between the handset and the base is
in accordance with the normal standards for a DECT phone: Maximun range up
to 300 metres outdoors or 50 metres indoors. Be aware that:
> Any large metal object, such as a refrigerator, mirror or filing cabinet, between the
handset and the base unit may block the radio signal.
9) Use only the supplied NiMH (Nickel Metal Hydride) batteries! The operation
periods for the handsets are only applicable with the default battery capacities
Port specification The
SELV port with respect to EN41003.
port (connected to the mains power supply) is a
The
port (connected to the telephone line) is aTNV port with respect to EN41003.
10) The use of other battery types or non-rechargeable batteries/primary cells
can be dangerous. These may cause interference and/or damage to the unit
or surroundings. The manufacturer will not be held liable for damage arising
from such non-compliance.
Binatone Helpline (for UK only)
Monday to Friday from 9:00am to 5:00pm
Tel: 0845 345 9677
**Please note that all calls are charged at local rate
or visit our website: www.binatoneonline.com
CLEANING AND CARE
Do not clean any part of your phone system with benzene, thinners or other
solvent chemicals - this may cause permanent damage which is not covered by the
Guarantee.
When necessary, clean it witha damp cloth.
Keep your phone system away from hot, humid conditions strong
> Other solid structures, like walls, may reduce the signal strength.
> Other electrical equipment may cause interference and/or affect the range.
11) Do not use third party charging bays. Damage may be caused to the batteries.
4.10.1 INTERCOM ANOTHER HANDSET.........................................................................13
4.10.2 CALL ALL HANDSETS............................................................................................13
4.10.3 TRANSFER AN EXTERNAL CALL TO ANOTHER HANDSET...............................13
4.10.4 MAKE A 3-WAY CONFERENCE CALL ..................................................................13
12) Please ensure the batteries are inserted in the correct polarity.
or
3) Do not place close to another telephone, a TV or audio equipment - it may cause
interference.
sunlight, and don't let it get wet.
13) Dispose of batteries safely. Do not immerse them in water, burn them, or put
them where they could get punctured.
THIS EQUIPMENT IS NOT DESIGNED FOR MAKING
EMERGENCY TELEPHONE CALLS WHEN THE POWER
FAILS. ALTERNATIVE ARRANGEMENTS SHOULD BE
MADE FOR ACCESS TO DIAL EMERGENCY SERVICES.
Every effort has been made to ensure high standards of reliability for your
Solas 1505 system. However, if something does go wrong, please do not try to
repair it yourself, consult your supplier or the Helpline.
4) Out of Range warning. If you hear a warning tone during a call, and/or the sound
in the earpiece becomes faint or distorted, you may be going out of range of the base
unit, so move nearer to the base unit within 20 seconds, otherwise the call may be
8
9
TROUBLESHOOTING ......................................................................................24
DECLARATION OF CONFORMITY..................................................................25
cut off.
10 GUARANTEE AND SERVICE .........................................................................26
Before operating thisset,
please read theseinstructions carefully.
1
2
3
4
Indicates when the battery needs charging.
Flashes when low battery power level is detected.
3.5 Text and Digit Entry Table
2
INSTALLING YOUR PHONE
3.2 Base Station Overview
1. PAGE
3
3.1
1
GETTING TO KNOW YOUR PHONE
Handset Overview
1
4
USING YOUR PHONE
2.1 Connecting the base station
The following table shows you where each letter and punctuation character can
be found, by using repeated presses of the alphanumeric keypad. This will be
helpful when storing a name in the
In editing mode, a cursor is displayed to indicate the current text entry position.
It is positioned at the right of the last character entered.
<
>
4.1 Make a Call
4.1.1 Preparatory Dialling
Enter the phone number and press <TALK ON> to connect to the line and
to dial the number. When entering the number, if you make a mistake,
Indicates when there are more characters or numbers in front of those
being displayed.
1) Plug the power supply
into the base station.
and line cord
Press the Page button on the base
station to page your handset(s).
It will ring for approximately 60 seconds.
UP
phonebook and renaming your handset.
From idle: access the Call List
In lists: move up the options
During calls / ringing: increase the volume.
2
Indicates when there are more characters or numbers after those being
displayed.
2) Plug the power adapter into a 230Vac,
50Hz mains socket, and the line cord into your
telephone line socket.
to delete digits.
press <C>
Press and hold to put base into registration mode.
Press the MENU/OK key to access the main menu.
Writing Tips:
4.1.2 Direct Dialling
Press <TALK ON> to connect to the line and then enter the phone number.
(Note: if you enter a wrong digit you cannot correct it with the <C> key.)
2. CHARGING CRADLE
2
LEFT SOFT KEY( /OK)
3) Always use the cables provided in the box
Warning: Use only the provided adaptor, using
other power supplies may cause a hazard.
Warning: Install the base unit in a position where
the mains adapter plug will reach an easily
Press the MENU/OK key to confirm the current selection.
1. Once a character is selected, the cursor will move to the next position after a
short pause.
2. You can move the cursor within the text with the <UP/DOWN> keys to
amend the text entry.
3. Press <C> to delete the last character.
4. Press and hold <C> to delete the entire text string.
Use with icons on display above, to
open menu and confirm options.
3.3 Display Icons and Symbols
displayed.
Indicates a new Call List entry is being
The LCD display gives you information on the current status of the telephone.
4.1.3 Call from the phonebook
1
2
3
TALK ON
Make or answer calls
DOWN
Press <MENU/OK>, then <DOWN>, then <MENU/OK> again to access the
phonebook and press <UP/DOWN> to select the desired phonebook entry.
Press <TALK ON> to dial out the selected phonebook entry.
Press the C/MUTE key to start an intercom call.
(INT)
accessible mains socket. Never try to lengthen the
mains power cable.
4
Press the C/MUTE key to go back to the previous menu level or cancel
In lists: move down the options
During calls / ringing: decrease the
volume
3.5.1 Character Set
(BACK) the current action.
Note: The alphanumeric keys provide a short-cut to find entries beginning with
Note: The base unit needs mains power for normal
operation, not just for charging the handset batteries.
2.2 Installing and charging the batteries
6
7
the corresponding letters.
Alphanumeric Editing
(For phonebook name editing and renaming handset)
Number Editing (For phone
number editing,date/time editing)
Press the C/MUTE key to clear a character, stop the alarm, or mute/unmute
the microphone during a call.
4.1.4 Call from the Call List (only available with Caller Display)
Press <UP> to access the Call List and press <UP/DOWN> to select the desired
Call List entry.
Press <TALK ON> to dial out the selected Call List entry.
Note: You can also access the Call List by pressing <MENU/OK> twice.
2nd 3rd 4th 5th 6th 7th 8th 9th 10th
3
4
1st
Key Press
5
SPEAKERPHONE (
)
1) Place the 2 supplied batteries into the battery
compartment with the polarity markings as shown
Use only the NiMH rechargeable battery type
provided.
2) Position the battery compartment cover over the
batteries and slide up to click into place.
3) Put the handset on the base and charge for
15 hours before using the handset for the first time.
The handset will give a beep when it is properly
placed on the base or charger.
Indicates you can scroll up / down the menu items / Phonebook list /
Redial list / Call List
1
2
3
4
5
6
7
8
9
0
space
-
1
1
3.4 Menu Structure
During a call: Press to turn on / off the
speakerphone.
A
D
G
J
M
P
T
W
Ø
*
B
E
H
K
N
Q
U
X
C
F
I
L
O
R
V
Y
2
3
4
5
6
S
8
Z
2
3
4
5
6
7
8
9
to go to CALL LIST, the first option in the menu list.
In idle mode, press <MENU/OK>
Steady when the handset is in range of the base. Flashes when out of
range of the base or not registered to the base.
Press <UP> or <DOWN> to go to other options in the menu list.
Press <MENU/OK> to enter a sub-menu or function.
Press <C/MUTE> to go back to the previous level.
Call List / Phonebook entry : Press to
make a call with speakerphone
Steady when an intercom call is in progress.
Flashes when there is an incoming internal call.
4.1.5 Call from the redial list
Press <DOWN> to access the redial list and press <UP/DOWN> to select the
desired redial number.
7
9
During ringing: Press to answer a call
Refer to the
following for the menu structure.
Indicates a call is in progress on that handset.
Flashes when there is an incoming external call.
with speakerphone
0, or P (Pause) if press and hold
*
#
Press <TALK ON> to dial out the selected redial number.
<UP/DOWN>
During answering machine message
playback / call screening:
?
'
/
,
\
-
(
,
)
&
*
#
o
<UP/
DOWN>
<UP/
DOWN>
<UP/
DOWN>
<UP/
<UP/
Indicates that the handset ringer is switched off.
Steady when an alarm is set. Flashes when the alarm is sounding.
Indicates that the keypad is locked.
4.1.6 Call timer
Key Press
<MENU>
DOWN>
DOWN>
5
8
Press to play message via speaker
Your handset automatically times the duration of every call.
Note: There are some different characters if the handset language is changed
(page 20).
Main
Menu
BS
SETTINGS
HS
SETTINGS
DEFAULT
PIN? - - - -
If you have a
REGISTRATION
PIN? - - - -
Broadband line
PHONEBOOK
CALL LIST
The call timer is displayed as soon as you answer a call or 15 seconds after
dialling and remains on the screen for 5 seconds after the end of the call.
It is shown in hours, minutes and seconds format (HH:MM:SS).
6
RIGHT SOFT KEY
If you connect your telephone to a line with
a broadband connection, you will need to
insert a micro-filter between the telephone
and the telephone line, otherwise you may get
interference between the telephone and the broadband,
which could cause problems.
In a home with broadband, every telephone must have a micro-filter connected,
not just the one at the telephone point that your modem is connected to.
If you need more broadband micro-filters, contact your broadband supplier.
Shows EMPTY
or the first Call
List Entry. Then
<OK> for:
ADD TO PB
DELETE
Shows EMPTY
or the first
phonebook Entry.
Then <OK> for:
ADD
PB STATUS
or
ADD
ALARM
DELETE HS
DIAL MODE
FLASH TIME
CHANGE PIN
Sub
menu
(CLEAR/BACK/MUTE/INTERCOM)
Use with icons on display above, to
clear characters, go back to previous
RING SETUP
TONE SETUP
LANGUAGE
RENAME HS
HS DISPLAY
AUTO ANSWER
DATE & TIME
Indicates when you have a new Voice Mail message.
(This is a Caller Display service and is not usually available from
UK network providers.)
4.2 Answer a Call
If the handset is not on the charging cradle:
When the phone rings, press <TALK ON> to answer a call.
Note: If AUTO ANSWER is set to ON, then lifting the handset off the base or
charger will answer the call automatically, and no buttons need to be
pressed.
menu, mute the microphone or make an intercom call.
DELETE ALL
DETAILS
Indicates when the battery is fully charged.
VIEW
EDIT
DELETE
DELETE ALL
PB STATUS
7
TALK OFF
Whole icon flashes when the battery is charging.
Internal block icon flashes when the battery is in final charging stage.
End a call or return to previous menu.
Press and hold to turn the handset on / off.
8
R - RECALL (also called Flash)
Sends a recall (R) signal, used for some PBX / Calling Features.
5
6
7
8
9
10
4.3 End a Call
During a call press <TALK OFF> to end the call.
4.8.2 Store a Redial Number into the Phonebook
5.4 Edit a Phonebook Entry
In idle:
4.10.1 Intercom Another Handset
5
PRIVATE PHONEBOOK
6
CALLER DISPLAY (NETWORK DEPENDENT)
1. Follow Steps 1 and 2 in section 4.8.1.
1. In idle mode, press <C/MUTE/INT>
numbers will display, along with a "9".
2. Enter the number of the handset that you want to call, or enter "9" to call all
handsets.
3. The called handset rings and <TALK ON> must be
and all the other registered handset
Each handset can store up to 20 private phonebook entries with names and
numbers. Each phonebook entry can have a maximum of 20 digits for the
phone number and 12 characters for the name. You can also select different
ringtones for your phonebook entries. (Note: the different ringtones only play if
you subscribe to Caller Display and the incoming number matches the stored
number.) Phonebook entries are stored alphabetically by name.
This feature is available if you have subscribed to the Calling Line Identification
service with your network service provider. Your phone can store up to 10
received calls with date/time information in the Call List. The number will be
shown on the handset display when the phone is ringing. If the number matches
with one of the entries in your Private Phonebook, the caller’s name stored in the
1. Press <MENU> then <UP/DOWN> to select PHONEBOOK and then press
<OK> to access the phonebook.
2. Press <UP/DOWN> to select the desired phonebook entry.
3. Press <MENU> and <UP/DOWN> to select EDIT.
4. Press <OK> to display the current name.
5. Edit the name and press <OK>.
OR
2. Press <MENU> and <UP/DOWN> to select ADD TO PB.
3. Press <OK> and then enter the name you want to use in the phonebook.
4. Press <OK> and then modify the number, if necessary.
5. Press <OK> to show <MELODY 1>.
6. Press <UP/DOWN> to browse the ringtone list. The respective ringtone will
be played when browsing the ringtone list. (Note: the selected melody will
only be played if you subscribe to Caller Display and the incoming number
Put the handset on the base station or charger to end the call.
4.4 Adjust Earpiece Volume
pressed on that handset
There are 5 levels (VOLUME 1 to VOLUME 5) to choose from for the earpiece
volume.
During a call:
Press <UP/DOWN> to select volume 1-5. The current setting is shown.
When you end the call, the setting will remain at the last selected level.
to establish the intercom call.
private phonebook will be displayed alternately with the number, and the
handset will ring with the ringtone associated with that phonebook entry.
Note: If only two handsets are registered to the base station, pressing
<C/MUTE/INT> will call the other handset immediately.
Note: If there is an external call while you are on an intercom call, you'll
hear warning beeps, and you have to end the intercom call, before you can
answer the external call.
5.1 Add a New Phonebook Entry
6. Edit the number and press <OK>.
7. Press <UP/DOWN> to select the ringtone and press <OK> to confirm.
In idle:
1.
matches the stored number.)
7. Press <OK> to confirm, and the entry will be stored.
If the call is from someone who withheld their number, e.g. by dialling 141,
“WITHHELD”
Press <MENU> then <UP/DOWN> to select PHONEBOOK and then press
<OK> to access the phonebook.
will display.
5.5 Delete a Phonebook Entry
In idle:
1. Press <MENU> then <UP/DOWN> to select PHONEBOOK and then press
<OK> to access the phonebook.
2. Press <UP/DOWN> to select the desired phonebook entry.
3. Press <MENU> and <UP/DOWN> to select DELETE
4. Press <OK> to confirm, and the entry will be deleted.
4.5 Mute a Call
4.8.3 Delete a Redial Number
If the call is from someone whose number is unavailable, e.g. an international
call or from a private exchange, “OUT OF AREA” will display.
If you've got new Caller Display records, the handset will display "X NEW
CALLS" in standby mode. The New Calls indication will remain until all the new
call records have been viewed on that handset.
2. Press <MENU> to show ADD.
You can talk to someone nearby without letting the caller hear you during a call.
During a call:
Press <C> to mute the microphone and “MUTED” will display on the LCD.
3. Press <OK> and then enter the name.
4. Press <OK> and then enter the number.
5. Press <OK> and <UP/DOWN> to select the desired ringtone for your
phonebook entry.
1. Follow Steps 1 and 2 in section 4.8.1
.
2. Press <MENU> and <UP/DOWN> to select DELETE.
3. Press <OK> to confirm, and the entry will be deleted.
4.10.2 Call All Handsets
1. In idle mode, press <C/MUTE/INT> and the registered handsets will display.
2. Press digit key <9> to ring to all registered handsets
Your caller cannot hear you. Press <C> again to unmute the microphone.
.
6. Press <OK> to store the phonebook entry.
4.6 Turn off the Handset Ringer
In idle, press and hold <HASH/#> to turn off the handset ringer. The “RINGER
OFF”icon is displayed on the LCD.
Note: The display will still flash the Call icon and show CALL or the Caller Display
number, when there is an incoming call, even if the ringer is turned off
To turn the ringer back on, press and hold <HASH/#> again.
4.8.4 Delete all Redial List entries
4.10.3 Transfer an External Call to another handset
During an external call:
1. Press <MENU> and <UP/DOWN> to select INTERCOM.
2. Press <OK> to show all the other registered handset numbers, plus "9".
Enter the number for the handset you want to transfer the call to.
3. The external call is put on hold automatically and the called handset rings.
4. Press <TALK ON> on the called handset to establish
5. Press <TALK OFF> on the calling handset or put the calling handset on the
charging cradle to end the current call with the external party.
6. The external call is transferred to the called handset.
Note: If the other handset has not answered the intercom call, you can stop
the intercom and return to the external call by pressing <TALK OFF>
6.1 View the Call List
5.2 Search for a Phonebook Entry
In idle:
1. Press <MENU> then <UP/DOWN> to select PHONEBOOK and then press
1. Follow Steps 1 and 2 in section 4.8.1.
2. Press <MENU> and <UP/DOWN> to select DELETE ALL
3. Press <OK> to display <CONFIRM?>.
4. Press <OK> to confirm. All entries will be deleted and the display will show
<EMPTY>.
5.6 Delete all Phonebook entries
All received calls are saved in the Call List, with the latest call at the top of the list.
When the call list is full, the oldest call will be replaced by a new call. Any
unanswered calls which have not been viewed are marked with a <*> icon at the
centre of the bottom line of the display.
1. Press <MENU> then <UP/DOWN> to select PHONEBOOK and then press
<OK> to access the phonebook.
<OK> to access the phonebook.
2.
Press <MENU> and <UP/DOWN> to select DELETE ALL.
2. Enter the first letter of the name using the alphanumeric keys(e.g. if it
begins with C, press the 2 key three times),
3. Press <OK> to display <CONFIRM?>.
4. Press <OK> to confirm. All entries will be deleted and the display will show
<EMPTY>.
1. Press <UP> to access the call list.
4.7 Turn on the Keypad Lock
In idle, press and hold <STAR/*> to turn on the keypad lock. The
LOCK” icon is displayed on the LCD.
4.9 Find the Handset
an internal call.
OR Press <MENU> and <UP/DOWN> to show CALL LIST, then press OK.
2. Press <UP/DOWN> to select the desired entry.
3. Press <#> to view the caller’s number if applicable.
and then <UP/DOWN> to scroll to the entry you want.
You can locate the handset by pressing <PAGE> on the base station. All the
handsets registered to the base will produce the paging tone and show
"PAGING" on the display. You can stop the paging by pressing <TALKON>/
<TALK OFF> /<C> on any handset or <PAGE> on the base again.
5.3 View a Phonebook Entry
In idle:
1. Press <MENU> then <UP/DOWN> to select PHONEBOOK and then press
<OK> to access the phonebook.
2. Press <UP/DOWN> to select the desired phonebook entry.
3. Press <MENU> and <UP/DOWN> to select VIEW.
4. Press <OK> and <UP/DOWN> to review the name, number and ringtone
of the selected phonebook entry.
Note: If the number is more than 12 digits, press <LEFT SOFT KEY> or
<RIGHT SOFT KEY> to view the remaining digits.
5.7 Check the Phonebook Usage
.
4
Press <MENU>, <UP/DOWN> to show DETAILS, and then <OK> to display
the date and time of the call. Press <OK> to go back to the previous screen.
Note: You can still use <TALK ON> to answer a call when the handset is ringing.
You can check how many phonebook entries are stored in your handset and
how many phonebook entries are available for you to store in the phonebook.
To turn the keypad lock off, press and hold <STAR/*> again.
6.2 Store a Call List Number into the Phonebook
Note: If there is an incoming call during paging, the phone will ring with the
4.8 Redial the last number
1. Press <MENU> then <UP/DOWN> to select PHONEBOOK and then press
incoming call instead of paging.
1. Follow Steps 1 and 2 in Section 6.1.
2. Press <MENU> and <UP/DOWN> to show ADD TO PB.
3. Press <OK> and then enter the name.
4. Press <OK> and the selected call list number is displayed.
5. Edit the number if necessary.
6. Press <OK> and <UP/DOWN> to select the ringtone.
7. Press <OK> to store the phonebook entry and return to the calls list.
<OK>
4.10.4 Make a 3 way Conference Call
-
to access the phonebook.
You can redial any of the 5 last numbers called. If you have stored a name in
the phonebook to go with the number, the name will be displayed instead.
The most recent last number will display at the top of the redial list.
2. Press <MENU> and <UP/DOWN> to select PB STATUS.
The conference call feature allows one external call to be shared with two
handsets (in intercom).
The three parties can share the conversation and no additional network
subscription is required.
4.10 Make an Internal Call (For multi-handset versions only)
3. Press <OK> to display how much of the phonebook is being used,
for example < 6/ 20 USED> means 6 entries are stored out of the
total 20 available spaces.
This feature is only applicable when there are at least two registered handsets.
It allows you to make internal calls, transfer external calls from one handset to
another handset and make conference calls. If the called handset is not
answered within 60 seconds, the called handset will stop ringing and the calling
handset will return to standby mode.
4.8.1 Redial a Number from the Redial List
1. Press <REDIAL> to access the redial list.
Note: If the redial list entry shows a name, press <Hash/#> to view the number
of this entry.
2. Press <UP/DOWN> to browse the redial list.
3. Press <TALK ON> to dial to the selected redial number.
During an external call:
1. Follow Steps 1 to 4 in section 4.10.3.
2. Press and hold <STAR> on the calling handset to establish the conference call
Either handset can exit the conference by pressing <TALK OFF>, leaving the
other handset still connected to the external call.
Note: If only one handset is registered to the base station, when <C/MUTE/INT>
is pressed, it will display “NOT POSSIBLE”
.
Note: If there are no numbers in the redial list, the display shows “EMPTY ”
11
12
13
14
15
16
|