Barco LC 5621 User Manual

LC-5621

56" - quad full HD LCD display

User manual

K5960013-00

About the manual

1.1

Contents of the user manual

This manual consists of the following chapters:

Chapter 1: About the manual

Chapter 2: Important notice

Chapter 3: Safety precautions

Chapter 4: Package and storage

Chapter 5: About the product

Chapter 6: Installation

This chapter describes how the monitor should be installed and connected into

the system. It incorporates the pin layout of all the connectors.

Chapter 7: Operation

This chapter describes the function and the general operation of all function keys

and indicators. How to power up the unit, how to adjust brightness and other

adjustments.

Chapter 8: Troubleshooting

This chapter lists some troubleshooting tips for common problems.

Chapter 9: Technical specifications

This chapter tabulates the technical specifications and the dimensions of the

display module.

Chapter 10: List of abbreviations

1.2

Change record

Revision

Date

Description

Mar-08

Initial Release

Barco - LC-5621 - User manual ________________________________________________________ 3

About the manual

1.3

Notation convention

Following notations are applicable to this manual and should be respected

through the manual.

WARNING:

Warnings – presented in this manual, provide information, which if not adhered to, may result

in personal injury or death.

CAUTION:

Cautions – presented in this manual, provide information, which if not adhered to, may result

in damage to the equipment.

NOTE:

Notes – presented in this manual, provide information, which emphasize points, significant to

understand and operate the unit.

IMPORTANT:

Important – presented in this manual, provide information, which is important to highlight.

4 ________________________________________________________ Barco - LC-5621 - User manual

Important notice

2.1

Commercial In Confidence

The information contained herein is Barco confidential information. No part of

the information contained herein may be disclosed outside of the organization of

the recipient, its sub-contractors, and customers in any form or by any means

and/or stored in a database or retrieval system without the prior written consent

of Barco.

2.2

Notice

The technical specifications mentioned in this manual shall under no

circumstances be used as proof or item of evidence.

Only the technical specifications defined in the Barco technical

specifications document (which is not part of this manual) can be used

as a base for contract negotiations.

Note that the DVI-D connectors are not always used according to the standard

DVI-D regulations, carefully follow the instructions of this user manual in order

to make the proper connections.

2.3

2.4

Federal Communication Commission (FCC) notice

This equipment has been tested and found to comply with the limits of an FCC

class (refer to the technical specifications of the specific unit for more details

about the corresponding class). These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a

commercial environment. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at

his own expense.

Disposal information

WARNING:

The fluorescent tubes inside the backlight of the LCD contain a small amount of mercury that is

considered hazardous to a person's health. Please follow local regulation or laws for disposal.

The LCD panel is composed of multiple layers of glass and protective glass with a small amount

of liquid in between. Rough handling or dropping can cause the LCD panel to break. If any part

of the skin or body comes in direct contact with the liquid, immediately wash the affected areas

with plenty of water for at least 15 minutes. If any symptoms are present after washing, get

medical care.

Barco - LC-5621 - User manual ________________________________________________________ 5

Important notice

2.5

No parts of this book may be reproduced in any form, by print, photo printing,

microfilm or any other means without written permission from Barco NV.

This manual could include inaccuracies or typographical errors. Manual change

supplements are revised as often as necessary to keep manuals as current and

accurate as possible.

6 ________________________________________________________ Barco - LC-5621 - User manual

Safety precautions

3.1

Safety warning

WARNING:

Electric shock or fire hazard can be caused if critical components are replaced by non-

conforming components. These components are marked in this guide by a

sign. Replace

with conform types only!

3.2

Product safety notice

WARNING:

Many electrical and mechanical parts in display units have special safety-related

characteristics. These characteristics are often not evident from visual inspection nor can the

protection afforded by them necessarily be obtained by using replacement components rated

for higher voltage, wattage, etc. Replacement parts that have these special safety

characteristics are identified in this data and its supplements and bulletins. Electrical

components having such features are identified by

or * on the schematics and on the

parts lists in this data and its supplements and bulletins. The use of a substitute replacement

that does not have the same safety characteristics as the recommended replacement part

shown in the parts lists in this data and its supplements and bulletins, may create shock or fire.

Barco - LC-5621 - User manual ________________________________________________________ 7

Package & storage

4.1

General

A safe transport of the units can only be guaranteed if the original undamaged

package is used for shipping. Handle with care when transporting.

Keep your original packaging. It is designed for this unit and is the ideal

protection during transportation.

4.2

Procedure in case of damaging

All shipments should be opened and inspected for concealed damage or pilferage

as soon as possible after the arrival at destination. The shipping cartons should

be retained for the surveyor’s inspection and full and accurate reserves must be

made by a letter or a fax message.

Depending upon the used means of transport, the written protest is subject to

different time-rules:

•

by sea: the protest has to be issued against the captain and/or ship within 3

days of the delivery of the goods.

by road: the protest has to be issued against the last road-carrier within 7

days after delivery of the goods.

by air: the protest has to be issued against the air-carrier within 14 days

after delivery of the goods.

In all cases, a claim or potential claim should be reported as soon as possible

whether or not full documentation is immediately available.

After completion of all required steps, the claim should normally be finalized

within one month. For more information about the claims handling procedure,

contact Barco NV.

4.3

Storage

Specific storage conditions can be found in the technical specifications. It is best

to store the unit in its original packaging, on a shelf in a ventilated and humidity

controlled room.

NOTE:

At least every 2 years, all boards containing electrolytic capacitors need to be powered during

24 hours minimum.

8 ________________________________________________________ Barco - LC-5621 - User manual

About the product

5.1

Product description

5.1.1

LC-5621

Barco’s LC-5621 display has been specifically designed for us in dedicated

professional applications. The display features quad full High Definition

(3840x2160) and delivers crisp, clear and color-accurate perfect images on a

large display size with 56” diagonal.

With the 56” Quad-HD display, operators benefit from a large display surface

without having to compromise on image quality or accuracy.

The LCD technology used in the Barco LC series offers many benefits not found

in other flat panel technologies:

•

High brightness

High contrast, even in high ambient light environments

Lower power consumption

Long lifetime

5.1.2

Main features

Ultra-high resolution

Barco’s LC-5621 is able to show large amounts of data in ultimate detail.

Faster response time

Thanks to its extremely fast response time (6.5 ms gray to gray), the LC-5621

reproduces fast-moving action scenes with vivid accuracy.

Wide viewing angle

The wide viewing angle (176°) and large surface are very beneficial in

collaborative environments where detailed information is viewed by multiple

participants.

Adjustable color temperature

The color temperature can be set to 5600K, 6500K, 7500K, 8500K, or 9300K to

adjust the color balance to different user requirements. User adjustment of the

color balance is also possible with R, G and B sliders.

VESA mounting structure for easy installation

Integrated mounting interfaces according to the VESA standards allow easy wall

or ceiling installation with VESA-approved standard (VESA MIS F, 800, 400, 8).

Table stands and mounting devices are optional.

Control & diagnostics

With extensive control and diagnostic functions through RS232, the LC-5621 can

be easily controlled, both on or off site or in real-time with a simple touch of a

button.

Barco - LC-5621 - User manual ________________________________________________________ 9

About the product

5.2

Recommended use

5.2.1

General precautions for all units

For optimum performance, please note the following when setting up and using

the unit(s).

•

Allow adequate ventilation in case the configuration is built in a rack or a

console, so that the heat can properly dissipate.

Make sure all units are disconnected from mains before connecting the sig-

nals.

The power cable or connector (in case of a split design = *connection cable)

is the primary means of detaching the system from the power supply. One

of the cable ends should be easily accessible.

•

Clean the screen surface of the display with a sponge or soft cleaning cloth.

Do NOT use abrasive cleaning agents, glass cleaner or tissue paper. Use

non-aggressive glass cleaning products instead. Do NOT use alcohol/sol-

vents at higher concentration > 5%.

Avoid displaying fixed patterns on the display for long periods of time to

avoid image persistence (after-image effects).

NOTE:

Always power-down the unit before disconnecting the power cable.

IMPORTANT:

Immediately unplug if:

•

Power supply cord or plug is damaged.

If the units have been dropped or the cabinets are damaged.

If the units don’t operate normally by following operating instructions.

*Connection cable= cable between the panel or display module and control

module

5.2.2

Image retention

The specified usage of the monitor with fixed patterns per 24 hours is maximum

2 shifts of 8 hours, with minimum 1 hour of relaxation between the shifts. The

24 months product warranty does not apply to the case of image retention

phenomena (after-image, shadows, dark lines and other image artifacts), that

may result from a usage outside of this specification.

10 _______________________________________________________ Barco - LC-5621 - User manual

Installation

6.1

Mounting procedure

6.1.1

LC-5621 mounted on stands

The unit is standard mounted on two stands on the rear of the unit. The stands

use the VESA mounting holes foreseen in the unit.

The stands can be mounted on two ways as shown in the drawing below.

USB HUB

DVI-D (Master)

RS232

DVI-D (Slave)

OFF

USB HUB

MAIN

POWER

DVI-D (Master)

RS232

DVI-D (Slave)

OFF

Stand (2x)

Figure 1: Location of the stands of the LC-5621

Barco - LC-5621 - User manual _______________________________________________________ 11

Installation

6.1.2

LC-5621 with VESA compliant mounting solution

The LC-5621 can be mounted on an arm compliant to the VESA MIS F, 800, 400,

8 standards.

The LC-5621 can also be mounted on a wall or ceiling according to the VESA MIS

F, 800, 400, 8 standards.

USB HUB

MAIN

POWER

DVI-D (Master)

RS232

DVI-D (Slave)

OFF

VESA mounting holes (8x)

Figure 2: Location of the VESA mounting holes

12 _______________________________________________________ Barco - LC-5621 - User manual

Installation

6.2

Connecting the signals

6.2.1

Connector location

DVI-D connector (Master)

RS-232 connector

DVI-D connector (Slave)

USB Hub

Power switch

Power connector (AC IN)

Figure 3: Connector location LC-5621

Barco - LC-5621 - User manual _______________________________________________________ 13

Installation

6.2.2

Detailed connector information

Power connector

6.2.2.1

IEC connector layout

POWER 100 - 240 VAC

Figure 4: Power connector

Power ranging

Automatic selection between the following voltage ranges:

•

90Vac – 140Vac (100V and 115V nominal)

180Vac – 264Vac (230V nominal)

Frequency: 45 – 65Hz

Mains Fuse inside the unit (T 6.3 A H), for fuse replacement procedures, refer to

the maintenance manual of the unit.

NOTE:

When connecting mains, check if the power source corresponds with the mains voltage marked

on the identification label on the display!

14 _______________________________________________________ Barco - LC-5621 - User manual

Installation

6.2.2.2

DVI connector

DVI-D connector layout

DVI-D receptable connector (24 pins), right angle with pegs

10 11 12 13 14 15 16

17 18 19 20 21 22 23 24

DVI input pinning

signal

TMDS Data 2-

TMDS Data 2+

TMDS Data 2/4 Shield

TMDS Data 4-

TMDS Data 4+

DDC Clock

DDC Data

TMDS Data 1-

TMDS Data 1+

TMDS Data 1/3 Shield

TMDS Data 3-

TMDS Data 3+

+5V Power

Ground for +5V

Hot Plug Detect

TMDS Data 0-

TMDS Data 0+

TMDS Data 0/5 Shield

TMDS Data 5-

TMDS Data 5+

TMDS Clock Shield

TMDS Clock+

TMDS Clock-

Barco - LC-5621 - User manual _______________________________________________________ 15

Installation

6.2.2.3

Control connector

9 pins subD male connector layout

Control pinning

signal

Signal receive

Signal transmit

GND

16 _______________________________________________________ Barco - LC-5621 - User manual

Installation

6.3

First installation

6.3.1

Case 1: Customer buys NVIDIA Quadro FX 4600

6.3.1.1

System requirements

Minimum system requirements for using a NVIDIA Quadro FX 4600:

•

PC compatible with Intel Pentium® or AMD Opteron® class processor or

higher

•

Open PCI Express x16 lane slot with open adjacent slot

Microsoft Windows XP

1 GB system memory

100 MB of available disk space for full installation

CD-ROM or DVD-ROM drive

VGA or DVI-I compatible display

750 W power supply (higher capacity may be required for NVIDIA SLI)

6.3.1.2

NVIDIA Quadro FX 4600

Master DVI slot

Slave DVI slot

Figure 5: NVIDIA Quadro FX 4600

Barco - LC-5621 - User manual _______________________________________________________ 17

Installation

6.3.1.3

Downloading the correct drivers

NOTE:

Before you install the LC-5621, use an additional LCD monitor to install the drivers to the

workstation.

First the correct driver should be installed on your system.

Go to http://www.nvidia.com

Go to download drivers and select the following items

Now the following screen should appear:

18 _______________________________________________________ Barco - LC-5621 - User manual

Installation

Check the checkbox and push the “Download Now” button.

Now the driver should be downloaded on your system.

6.3.1.4

Installing the drivers

Install the driver of the NVIDIA Quadro FX 4600 by double clicking the icon on

your desktop. Following image appears on the screen:

Accept the license agreement and click “Next”.

Barco - LC-5621 - User manual _______________________________________________________ 19

Installation

Click “Next”.

Following screen appears on the screen, click “Next” to install the drivers to your

computer.

20 _______________________________________________________ Barco - LC-5621 - User manual

Installation

Select “Yes, I want to restart my computer now”. Click “Finish”.

It is possible that the computer doesn’t restart automatically. If needed, restart

the computer manually.

Barco - LC-5621 - User manual _______________________________________________________ 21

Installation

6.3.1.5

Connecting the LC-5621 to the workstation

NOTE:

Switch the additional LCD screen with the LC-5621.

Put DVI-D Master of the unit to the master DVI connector on the graphics card

closest to the motherboard. Put DVI-D Slave of the unit to the slave DVI

connector on the graphics card furthest from the motherboard.

When the computer is restarted, the following screen appears on the right side

of the unit. The left side of the unit is black.

Click “Next” to continue.