Barco Coronis Fusion 10MP User Manual

Coronis Fusion 10MP  
User Guide  
Welcome!  
Thank you for choosing this CORONIS FUSION 10MP display!  
Equipped with proprietary 'SmoothGray' technology for a meticulously  
rendered grayscale curve, the CORONIS FUSION 10MP display makes subtle  
details and lesions more noticeable than ever before. Add to this  
exceptionally high brightness and contrast levels, truly dark blacks and  
perfect geometry and you begin to understand that supreme grayscale  
precision has a new meaning.  
Thanks to the seamless 30-inch LCD screen, you can easily compare prior  
and current mammography images without the annoyance of a central  
bezel. Moreover, it allows you to review X-ray chest images or 40 full-  
resolution CT or MR images with superb diagnostic precision on a single  
screen.  
The integrated I-Guard sensor makes Quality Assurance an easy job.  
Combined with the online MediCal QAWeb solution, I–Guard performs  
intervention-free DICOM calibrations, Quality Assurance tests and remote  
assessment of your display.  
Use the instructions in this guide to install your CORONIS FUSION 10MP  
display and discover all these interesting features yourself!  
Following symbols may be used throughout this guide:  
Warning: Risk of  
injury to human  
beings  
Caution: Risk of  
damage to the  
product  
WARNING  
Important notice  
or remark  
Note  
Hint, tip  
Additional  
information  
Read all the safety information starting on page 47 before  
operating your CORONIS FUSION 10MP display.  
Coronis Fusion 10MP  
3
(This page intentionally left blank.)  
4
Coronis Fusion 10MP  
Table of contents  
Coronis Fusion 10MP  
5
6
Coronis Fusion 10MP  
What's in the box  
Your CORONIS FUSION 10MP display comes with:  
this CORONIS FUSION 10MP display guide  
a system CD  
two DVI cables  
two DisplayPort cables  
a USB cable  
a set of AC power cords  
an external power supply  
If you ordered a Barco display controller, it’s also in the box together  
with its accessories and dedicated user guide.  
Keep your original packaging. It is designed for this display and  
is the ideal protection during transport.  
Coronis Fusion 10MP  
7
 
(This page intentionally left blank.)  
8
Coronis Fusion 10MP  
Parts, controls and connectors  
Front view  
1
2
3
4
5 6 7  
8
1
3
5
7
2
4
6
8
USB downstream connectors  
Right/Down key  
Left/Up key  
Menu/Enter key  
Ambient light sensor  
Control wheel  
Stand-by/Cancel key  
Power status indicator light  
Coronis Fusion 10MP  
9
   
Rear view  
6
7
8
1
2
3
4
5
9
10 11 12  
1
3
2
4
USB downstream connector  
USB upstream connector  
DVI 1 video input  
Ethernet connector (see note  
below)  
5
6
8
DisplayPort 1 video input  
Connector compartment  
cover  
7
9
Neck cover  
Display stand cover  
DVI 2 video input  
10  
12  
DisplayPort 2 video input  
+5 VDC, 0.5 A power output  
11  
+24 VDC power input  
The Ethernet connection is used for maintenance purposes and  
is not supported for user application.  
10 Coronis Fusion 10MP  
 
Display installation  
Prior to installing your CORONIS FUSION 10MP display and  
connecting all necessary cables, make sure to have a suitable  
display controller physically installed in your computer. If you are  
using a Barco display controller, please consult the user guide  
delivered with it to do this.  
Removing the covers  
CONNECTOR COMPARTMENT COVER  
The connector compartment cover should be removed to get access to  
the connectors. To remove the cover, proceed as follows:  
1 Gently lift the clips at one of the handles of the connector  
compartment cover to release that side of the cover.  
2 Do the same at the other side of the cover.  
3 Remove the cover.  
Coronis Fusion 10MP 11  
   
DISPLAY STAND COVER  
To get access to the cable routing channel, the display stand cover  
should be removed. This can be done as follows:  
1 Gently press and hold the clips at the inside top of the cover.  
2 Slide the cover upwards while holding the clips pressed.  
12 Coronis Fusion 10MP  
Unlocking the height mechanism  
In the factory, the height-positioning system in the display stand is  
locked with a red hook to prevent damage during transportation. You’ll  
have to remove this hook before adjusting your display height position.  
1 While holding the display panel pushed down, pull out the red  
hook in the display stand.  
To retain the hook for possible future transportation, insert the  
short, red end of the hook back into the stand of your display.  
Coronis Fusion 10MP 13  
 
Adjusting the display position  
Now that the height-positioning system of your display is unlocked, you  
can tilt, swivel, raise and lower the display as desired.  
Do not try to pivot your display when attached to the stand.  
Trying to do so could cause serious damage to your display and  
its stand.  
14 Coronis Fusion 10MP  
 
Connecting the signal cables  
1 Connect one head of the display controller to the DVI 1 or  
DisplayPort 1 connector with one of the supplied DVI or DisplayPort  
cables.  
2 Connect another head of the display controller to the DVI 2 or  
DisplayPort 2 connector with one of the supplied DVI or DisplayPort  
cables.  
Each side of your display can have a different video input  
connected (one side can have DVI connected while the  
other side has DisplayPort connected). Both display sides  
can have the same video input connected as well but  
only one video input is allowed on each side of your  
display.  
3 If you want to make use of your display’s USB downstream  
connectors, connect a PC USB downstream connector to the  
display’s USB upstream connector by means of the supplied USB  
2.0 cable.  
Coronis Fusion 10MP 15  
 
Connecting the power cables  
1 Connect the supplied external DC power supply to the +24 VDC  
power input of your CORONIS FUSION 10MP display.  
2 Plug the other end of the external DC power supply into a  
grounded power outlet by means of the proper power cord  
delivered in the packaging.  
Routing the cables  
Route all connected cables trough the cable routing channel in the stand  
of your display.  
The cable straps at the inside of the connector compartment  
allow you to fix the cables for better shielding of the cables.  
16 Coronis Fusion 10MP  
   
Re-attaching the covers  
1 Re-attach the display stand cover by sliding it downward. You’ll  
hear a “click” sound of the cover’s clips when the display stand  
cover is in position.  
Pay attention that all cables stay in the cable channel  
while replacing the cover.  
2 Re-attach the connector compartment cover by sliding the cover’s  
top in position and then push the cover’s bottom. You’ll hear a  
“click” sound of the cover’s clips when the connector compartment  
cover is in position.  
Coronis Fusion 10MP 17  
 
VESA-mount installation  
The panel, standard attached to a stand, is compatible with the VESA  
100 mm standard. Thus, it can be used with an arm that is approved by  
VESA. This chapter shows you how to release the panel from the stand  
and how to attach it to an arm. If you’re not using an arm, you can skip  
this chapter.  
1 Gently pull open both lower sides of the cover.  
2 Slide the cover upwards while holding the lower sides pulled open.  
18 Coronis Fusion 10MP  
 
3 Lift the plastic frame that covers the fixation of the panel to the  
stand. Turn it for 45 degrees to uncover the fixation screws.  
4 Unscrew the four fixation screws fixing the panel to the stand.  
5 Attach the panel firmly to the arm using 4 screws M4 x 10 mm.  
You should mount the panel in landscape position. Portrait position  
is not supported.  
Use an arm that can support a weight of at least 18 kg  
(39.68 lbs). Failure to do so could make the panel fall,  
causing serious injury to a child or adult, and serious  
damage to the equipment.  
Coronis Fusion 10MP 19  
First time starting up  
You are now ready to start up your CORONIS FUSION 10MP display system  
for the first time.  
1 Switch on your CORONIS FUSION 10MP display as described in  
2 Turn on the computer connected to your display.  
If you have properly installed your display and display controller, the  
Windows start-up messages will appear once the boot procedure is  
finished.  
Your CORONIS FUSION 10MP display will be running in a basic  
video mode at a default refresh rate when first time starting  
up.  
If you are using a Barco display controller, please consult the  
user guide delivered with it to install the drivers, software and  
documentation. When this is done, your display will  
automatically detect the connected video input signal(s) and  
apply the correct video mode and refresh rate.  
20 Coronis Fusion 10MP  
 
Daily operation  
Recommendations for daily operation  
OPTIMIZE THE LIFETIME OF YOUR DISPLAY  
Enabling the Display Power Management System (DPMS) of your display  
will optimize its diagnostic lifetime by automatically switching off the  
backlight when the display is not used for a specified period of time. By  
default, DPMS is enabled on your display, but it also needs to be  
activated on your workstation. To do this, go to “Power Options  
Properties” in the “Control Panel”.  
Barco recommends setting DPMS activation after 20 minutes of  
non-usage.  
USE A SCREEN SAVER TO AVOID IMAGE RETENTION  
Prolonged operation of an LCD with the same content on the same  
screen area may result in a form of image retention.  
You can avoid or significantly reduce the occurrence of this phenomenon  
by using a screen saver. You can activate a screen saver in the “Display  
properties” window of your workstation.  
Barco recommends setting screen saver activation after 5  
minutes of non-usage. A good screen saver displays moving  
content.  
In case you are working with the same image or an application with  
static image elements for several hours continuously (so that the screen  
saver is not activated), change the image content regularly to avoid  
image retention of the static elements.  
UNDERSTAND PIXEL TECHNOLOGY  
LCD displays use technology based on pixels. As a normal tolerance in  
the manufacturing of the LCD, a limited number of these pixels may  
remain either dark or permanently lit, without affecting the diagnostic  
Coronis Fusion 10MP 21  
   
performance of the product. To ensure optimal product quality, Barco  
applies strict selection criteria for its LCD panels.  
To learn more about LCD technology and missing pixels, consult  
medical.  
ENHANCE USER COMFORT  
Every Barco multi-head display system is color matched with the highest  
specification in the market.  
Barco recommends keeping color-matched displays together.  
Furthermore, it is important to use all displays of a multi-head  
configuration at the same rate to preserve color matching  
throughout the economic lifetime of the system.  
MAXIMIZE QUALITY ASSURANCE  
The ‘MediCal QAWeb’ system offers online service for high-grade Quality  
Assurance, providing maximum diagnostic confidence and uptime.  
Learn more and sign up for the free MediCal QAWeb Essential  
22 Coronis Fusion 10MP  
Keys indicator lights  
By default, the keys indicator lights will be dimmed which makes them  
unavailable at that moment.  
TO MAKE THE KEYS LIGHT UP:  
1 Gently sweep your finger over the bottom right hand side of your  
display.  
As a result, the keys will light up and are now available for further  
actions. However, if no further actions are taken within the following 5  
seconds, the keys indicator lights will dim again.  
The keys indicator lights auto-dim function can be disabled in  
the OSD menu. Please refer to “Keys indicator lights” on  
page 29 for detailed instructions on how to do this.  
Coronis Fusion 10MP 23  
 
Stand-by switching  
Switching on the display while it is in stand-by mode or vice versa can  
both be done by using the keys or by using the control wheel.  
TO SWITCH YOUR DISPLAY ON/STAND-BY USING THE KEYS:  
1 Light up the keys indicator lights as previously described.  
2 While the keys are light up, touch the Stand-by/Cancel  
key for  
approximately 2 seconds.  
TO SWITCH YOUR DISPLAY ON/STAND-BY USING THE CONTROL WHEEL:  
1 Press and hold the control wheel for approximately 2 seconds.  
As a result, the display will switch on or will switch to stand-by mode.  
When the display is switched on, the power status indicator light is  
dimmed. When the display is in stand-by mode, the power status  
indicator light is orange.  
The power status indicator light can be enabled in the OSD  
menu so that it will turn blue when the display is switched  
for detailed instructions on how to do this.  
In case of a power outage recovery, your display will always  
start-up in the power mode it was in before the power  
interruption (i.e. stand-by or on). This protects your display  
against inadvertent image retention problems.  
24 Coronis Fusion 10MP  
 
Bringing up the OSD menu  
The OSD menu allows you to configure different settings to make your  
CORONIS FUSION 10MP display fit your needs within your working  
environment. Also, you can retrieve general information about your  
display and its current configuration settings through the OSD menu.  
TO BRING UP THE OSD MENU USING THE KEYS:  
1 If not already done so, switch on the display as previously  
described.  
2 Light up the keys indicator lights as previously described.  
3 While the keys light up, touch the Menu/Enter  
key.  
TO BRING UP THE OSD MENU USING CONTROL WHEEL:  
1 If not already done so, switch on the display as previously  
described.  
2 Shortly press the control wheel.  
As a result, the OSD main menu comes up in the bottom right corner of  
the screen. If no further actions are taken within the following 90  
seconds however, the OSD menu will disappear again.  
The OSD menu automatic close function can be disabled in the  
OSD menu. Please refer to “OSD menu automatic close  
function” on page 28 for detailed instructions on how to do  
this.  
The OSD menu position can be modified in the OSD menu.  
Please refer to “OSD menu position” on page 27 for detailed  
instructions on how to do this.  
Coronis Fusion 10MP 25  
 
Navigating through the OSD menus  
ABOUT OSD MENU NAVIGATION  
Navigating through the OSD menu can be done by using the keys or by  
using the control wheel.  
TO NAVIGATE THE OSD MENU USING THE KEYS:  
Use the Right/Down and Left/Up keys to move through the  
(sub)menus, change values or make selections.  
To go into a submenu or confirm adjustments and selections, use  
the Menu/Enter  
key.  
Use the Stand-by/Cancel key to cancel adjustments or exit a  
(sub)menu.  
Exit the OSD menu by touching the Stand-by/Cancel key for  
approximately 2 seconds.  
TO NAVIGATE THE OSD MENU USING THE CONTROL WHEEL:  
Rotate the control wheel to move through the menus, change  
values or make selections.  
To go into a submenu or confirm adjustments and selections,  
shortly click the control wheel.  
Click the control wheel for approximately 2 seconds to cancel  
adjustments or exit a (sub)menu.  
26 Coronis Fusion 10MP  
 
Advanced operation  
OSD menu position  
ABOUT THE OSD MENU POSITION  
By default, the OSD menu comes up in the bottom right corner of the  
screen. This position can be modified however. There’s choice from a  
number of predefined positions.  
TO CHANGE THE POSITION OF THE OSD MENU:  
1 Bring up the OSD main menu.  
2 Navigate to the Configuration > User Interface > Menu menu.  
3 Enter the Position submenu.  
4 Select one of the available OSD menu positions and confirm.  
OSD menu language  
ABOUT THE OSD MENU LANGUAGE  
By default, the OSD menu comes up in English. However, there’s a wide  
range of other languages available for the OSD menu of your CORONIS  
FUSION 10MP display.  
TO CHANGE THE LANGUAGE OF THE OSD MENU:  
1 Bring up the OSD main menu.  
2 Navigate to the Configuration > User Interface > Menu menu.  
3 Enter the Language submenu.  
4 Select one of the available languages and confirm.  
Coronis Fusion 10MP 27  
     
OSD menu automatic close function  
ABOUT THE OSD MENU AUTOMATIC CLOSE FUNCTION  
By default, the OSD menu will disappear automatically after  
approximately 90 seconds of inactivity. However, this function can be  
disabled so that the OSD menu remains on the screen until manually  
closed.  
TO ENABLE/DISABLE THE OSD MENU AUTOMATIC CLOSE FUNCTION:  
1 Bring up the OSD main menu.  
2 Navigate to the Configuration > User Interface > Menu menu.  
3 Enter the Automatic Close submenu.  
4 Select Enabled/Disabled as desired and confirm.  
Power status indicator light  
ABOUT THE POWER STATUS INDICATOR LIGHT  
By default, when the display is switched on, the power status indicator  
light is dimmed. This behavior can be changed so that the power status  
indicator light will be blue when the display is switched on.  
When the display is in stand-by mode, the power status  
indicator light will always turn orange, even when the power  
status indicator light is disabled.  
TO ENABLE/DISABLE THE POWER STATUS INDICATOR LIGHT:  
1 Bring up the OSD main menu.  
2 Navigate to the Configuration > User Interface > Indicator Lights  
menu.  
3 Enter the Power Status submenu.  
4 Select Enabled/Disabled as desired and confirm.  
28 Coronis Fusion 10MP  
   
Keys indicator lights  
ABOUT THE KEYS INDICATOR LIGHTS  
By default, after lighting up, the keys indicator lights will dim again if no  
further actions are taken within the following 5 seconds. However, this  
behavior can be changed so that the keys indicator lights are always on  
or always off.  
TO CONFIGURE THE KEYS INDICATOR LIGHTS:  
1 Bring up the OSD main menu.  
2 Navigate to the Configuration > User Interface > Indicator Lights  
menu.  
3 Enter the Keys submenu.  
4 Select Automatic/Always On/Always Off as desired and confirm.  
Power lock function  
ABOUT THE POWER LOCK FUNCTION  
By enabling the power lock function, the CORONIS FUSION 10MP display is  
forced to remain switched on. This means that it can’t be switched to  
stand-by mode until the power lock function is disabled again.  
TO ENABLE/DISABLE THE POWER LOCK FUNCTION:  
1 Bring up the OSD main menu.  
2 Navigate to the Configuration > User Interface > Controls menu.  
3 Enter the Power Lock submenu.  
4 Select Enabled/Disabled as desired and confirm.  
Coronis Fusion 10MP 29  
   
Keys sound  
ABOUT THE KEYS SOUND  
By default, the keys will make a “beep” sound on every touch. However,  
this sound can be disabled so that no sound will be heard when using  
the keys.  
TO ENABLE/DISABLE THE KEYS SOUND:  
1 Bring up the OSD main menu.  
2 Navigate to the Configuration > User Interface > Controls menu.  
3 Enter the Sound submenu.  
4 Select Enabled/Disabled as desired and confirm.  
DPMS mode  
ABOUT DPMS MODE  
Enabling the Display Power Management System (DPMS) mode on your  
display will optimize its diagnostic lifetime by automatically switching  
off the backlight when the display is not used for a specified period of  
time. By default, DPMS mode is enabled on your display, but it also  
needs to be activated on your workstation. To do this, go to the “Power  
options properties” window of your workstation.  
Barco recommends setting DPMS activation after 20 minutes of  
non-usage.  
TO ENABLE/DISABLE DPMS MODE ON YOUR DISPLAY:  
1 Bring up the OSD main menu.  
2 Navigate to the Configuration > Power Management menu.  
3 Enter the DPMS Mode submenu.  
4 Select Enabled/Disabled as desired and confirm.  
30 Coronis Fusion 10MP  
   
Luminance target  
ABOUT THE LUMINANCE TARGET  
The luminance target of your CORONIS FUSION 10MP display is adjustable  
over a predefined range. When you change the luminance target, the  
display will adjust its backlight to reach the target.  
TO SET THE LUMINANCE TARGET:  
1 Bring up the OSD main menu.  
2 Navigate to the Configuration > Calibration menu.  
3 Enter the Luminance Target submenu.  
4 Set a luminance target value as desired and confirm.  
Viewing modes  
ABOUT VIEWING MODES  
The CORONIS FUSION 10MP display can be used in two viewing modes:  
Diagnostic  
Text  
This mode provides the full calibrated  
luminance and is intended for using the  
display for diagnostic purposes.  
In this mode, the luminance is reduced to  
approximately half of the luminance. This is  
intended for using the display with office  
applications such as word processing.  
TO SELECT A VIEWING MODE:  
1 Bring up the OSD main menu.  
2 Navigate to the Configuration > Calibration menu.  
3 Enter the Viewing Mode submenu.  
4 Select Diagnostic/Text as desired and confirm.  
Coronis Fusion 10MP 31  
   
Display functions  
ABOUT DISPLAY FUNCTIONS  
Native, uncorrected panels will display all grayscale/color levels at an  
equal luminance. Studies have shown however, that in medical images  
certain grayscale/color parts contain more diagnostic information then  
others. To respond to these conclusions, display functions have been  
defined. These functions emphasize on these parts containing crucial  
diagnostic information by correcting the native panel behavior.  
Native  
If you select Native, the native panel  
behavior will not be corrected.  
Dynamic Gamma 1.8  
Dynamic Gamma 2.2  
These are gamma functions that are shifted  
to take into account the non-zero  
luminance of an LCD panel when driven  
with a “black” signal.  
They are especially useful in CT applications  
to improve the perception of low  
Haunsfield values.  
DICOM  
DICOM (Digital Imaging and  
Communications in Medicine) is an  
international standard that was developed  
to improve the quality and communication  
of digital images in radiology.  
In short, the DICOM display function results  
in more visible grayscales in the images.  
Barco recommends selecting the DICOM  
display function for most medical viewing  
applications.  
User  
This display function will be automatically  
selected when display functions are  
defined by MediCal QAWeb.  
Gamma 1.8  
Gamma 2.2  
Select one of these display functions in  
case the display is to replace a CRT display  
with a gamma of 1.8 or 2.2 respectively.  
32 Coronis Fusion 10MP  
 
TO SELECT A DISPLAY FUNCTION:  
1 Bring up the OSD main menu.  
2 Navigate to the Configuration > Calibration menu.  
3 Enter the Display Function submenu.  
4 Select one of the available display functions and confirm.  
Ambient Light Compensation (ALC)  
ABOUT ALC  
Ambient Light Compensation (ALC) can only be enabled on  
your display when the DICOM display function is selected.  
Therefore, please refer to “Display functions” on page 32 to  
correctly set the display function.  
When ALC is enabled, the DICOM display function will be recalculated  
taking a preset ambient light correction value into account. This value is  
determined by the selected reading room. Therefore, it is also important  
to select a realistic reading room when enabling ALC. This can be done  
by following the instructions in “Reading rooms” on page 34.  
TO ENABLE/DISABLE ALC:  
1 Bring up the OSD main menu.  
2 Navigate to the Configuration > Calibration > Ambient Light  
menu.  
3 Enter the Ambient Light Compensation submenu.  
4 Select Enabled/Disabled as desired and confirm.  
Coronis Fusion 10MP 33  
 
Reading rooms  
ABOUT READING ROOMS  
Reading rooms can only be selected when the DICOM display  
function is selected. Therefore, please refer to “Display  
functions” on page 32 to correctly set the display function.  
The American Association of Physicists in Medicine (AAPM) composed a  
list of pre-defined reading rooms. Each of these reading rooms are  
defined by following parameters:  
the maximum light allowed in this type of room  
the preset ambient light correction value for this reading room  
These parameters are stored in your display and determine the preset  
ambient light correction value to take into account to recalculate the  
DICOM display function when Ambient Light Compensation (ALC) is  
page 33 to enable ALC.  
The available reading rooms for your CORONIS FUSION 10MP display are:  
CR/DR/MAMMO  
Corresponds to light conditions in  
diagnostic reading rooms for computed  
radiology, digital radiology or  
mammography. This setting has the lowest  
maximum ambient light.  
CT/MR/NM  
Staff Office  
Corresponds to light conditions in  
diagnostic reading rooms for computed  
tomography, magnetic resonance or  
nuclear medicine scans.  
Corresponds to light conditions in office  
rooms.  
Clinical Viewing  
Room  
Corresponds to light conditions in  
diagnostic reading rooms for clinical  
viewing.  
34 Coronis Fusion 10MP  
 
Emergency Room  
Operating Room  
Corresponds to light conditions in  
emergency rooms.  
Corresponds to light conditions in operating  
rooms. This setting has the highest  
maximum ambient light.  
TO SELECT A READING ROOM:  
1 Bring up the OSD main menu.  
2 Navigate to the Configuration > Calibration > Ambient Light  
menu.  
3 Enter the Reading Room submenu.  
4 Select one of the available reading rooms and confirm.  
Image orientation  
ABOUT IMAGE ORIENTATION  
Your display automatically detects its physical orientation (portrait or  
landscape) and, by default, automatically adjusts the image orientation  
to this. This means that when your display is physically rotated, the  
image will rotate along.  
The OSD menu however, allows to overrule this behavior and force the  
image orientation to portrait or landscape regardless of the physical  
orientation of the display. This may be especially useful when operating  
your display with the screen facing upwards.  
TO SET THE IMAGE ORIENTATION:  
1 Bring up the OSD main menu.  
2 Navigate to the Configuration > Image Sources menu.  
3 Enter the Orientation submenu.  
4 Select Landscape/Portrait/Automatic as desired and confirm.  
Coronis Fusion 10MP 35  
 
Image scaling  
ABOUT IMAGE SCALING  
Enabling image scaling will multiply each individual pixel to one or more  
adjacent pixels so that the size of the displayed image will be a multiple  
of the original image source video input signal.  
Image scaling is only possible when the resolution of your  
display’s video input signal is less than or equal to half the  
maximum resolution of the display.  
TO ENABLE/DISABLE IMAGE SCALING:  
1 Bring up the OSD main menu.  
2 Navigate to the Configuration > Image Sources menu.  
3 Enter the Scaling submenu.  
4 Select Enabled/Disabled as desired and confirm.  
Image source selection modes  
ABOUT IMAGE SOURCE SELECTION MODES  
Your CORONIS FUSION 10MP display automatically detects the number of  
video input signals connected, attaches them to the correct display side  
and applies the correct video settings to it (resolution, video encoding  
mode, refresh rate,...). However, it may be needed to manually select  
the video input signal(s) to be displayed on a certain display side or to  
36 Coronis Fusion 10MP  
   
adjust certain video settings yourself. The start to this is selecting one of  
the following image source selection modes available for your display:  
Automatic  
In this mode, your display automatically  
detects the connected video input signals,  
attaches them to the correct display side  
and applies the correct video settings to it  
(resolution, video encoding mode, refresh  
rate,...).  
No video settings are available when this  
mode is selected.  
One Image Source  
Two Image Sources  
This mode is intended for displaying and  
manually configuring only one connected  
video input signal.  
When selecting this mode, the video  
settings become available for the selected  
video input signal.  
This mode is intended for displaying and  
manually configuring two connected video  
input signals (one on each display side).  
When selecting this mode, the video  
settings become available for the selected  
video input signal on each side of the  
display.  
TO SELECT AN IMAGE SOURCE SELECTION MODE:  
1 Bring up the OSD main menu.  
2 Navigate to the Configuration > Image Sources menu.  
3 Enter the Image Source Selection submenu.  
4 Select one of the available image source selection modes and  
confirm.  
Coronis Fusion 10MP 37  
Video input signals  
ABOUT VIDEO INPUT SIGNALS  
Your CORONIS FUSION 10MP display automatically detects the  
connected video input signals. Manually selecting image  
source video input signals is possible, but then your display’s  
image source selection mode should be set to allow this.  
to do this.  
The available input signals for your display are:  
DisplayPort 1  
This input corresponds to the DisplayPort 1  
DVI 1  
This input corresponds to the DVI 1  
DisplayPort 2  
DVI 2  
This input corresponds to the DisplayPort 2  
This input corresponds to the DVI 2  
TO MANUALLY SELECT A VIDEO INPUT SIGNAL:  
1 Bring up the OSD main menu.  
2 Navigate to the Configuration > Image Sources > (Left/Right)  
Image Source menu.  
3 Enter the Input Signal submenu.  
4 Select one of the available input signals and confirm.  
38 Coronis Fusion 10MP  
 
Video encoding modes  
ABOUT VIDEO ENCODING MODES  
Your CORONIS FUSION 10MP display automatically detects the  
connected video input signals and applies the correct video  
encoding settings. Manually selecting a video encoding mode  
is possible, but then your display’s image source selection  
mode should be set to allow this. Please refer to “Image  
Video encoding modes specify how the color and luminance information  
is encoded in the video signal. In consumer displays, this is usually done  
by a limited 8-bit encoding mechanism. Your CORONIS FUSION 10MP  
display however, features 10-bit encoding enabling it to better match  
the DICOM defined grayscale range. Such an extensive range is  
necessary to comply with the guidelines set forward by the latest  
medical guidelines.  
The available video encoding modes for your display are listed below.  
Please note that the display controller connected to your  
display might not always support all these video encoding  
modes.  
Standard  
HDR1  
This mode uses the standard 8 bit encoding  
mechanism.  
This mode features 10-bit video encoding  
following the High Dynamic Range (HDR)  
standard, usually used on color displays.  
HDR2  
HDR2 is a Barco specific mode featuring  
10-bit video encoding following the High  
Dynamic Range (HDR) standard but  
allowing full refresh rate (which is not  
always possible with HDR1). This mode is  
usually used on color displays.  
Coronis Fusion 10MP 39  
 
Dual 10  
Dual 10 is a Barco specific 10-bit video  
encoding mode which is usually used on  
grayscale displays and which allows full  
refresh rate.  
Automatic  
When selecting this option, your CORONIS  
FUSION 10MP display will automatically  
assign the correct video encoding settings  
to the connected video input signals.  
TO MANUALLY SELECT A VIDEO ENCODING MODE:  
1 Bring up the OSD main menu.  
2 Navigate to the Configuration > Image Sources > (Left/Right)  
Image Source menu.  
3 Enter the Video Encoding submenu.  
4 Select one of the available video encoding modes and confirm.  
Grayscale conversion modes  
ABOUT GRAYSCALE CONVERSION MODES  
Your CORONIS FUSION 10MP display automatically detects the  
connected video input signals and applies the correct grayscale  
conversion settings. Manually selecting a grayscale conversion  
mode is possible, but then your display’s image source  
selection mode should be set to allow this. Please refer to  
Grayscale conversion modes specify how color generated on the display  
controller is converted to grayscale in your display.  
The available grayscale conversion modes are:  
Use Red Channel  
This mode is intended for grayscale  
displays where gray is sent over the red  
channel.  
40 Coronis Fusion 10MP  
 
Use Green Channel  
Use Blue Channel  
Use All Channels  
This mode is intended for grayscale  
displays where gray is sent over the green  
channel.  
This mode is intended for grayscale  
displays where gray is sent over the blue  
channel.  
This mode is intended for grayscale  
displays where gray is sent over the red,  
green and blue channel. This done by  
means of a standard conversion  
mechanism where 30% red, 59% green  
and 11% blue are used to generate gray.  
TO MANUALLY SELECT A GRAYSCALE CONVERSION MODE:  
1 Bring up the OSD main menu.  
2 Navigate to the Configuration > Image Sources > (Left/Right)  
Image Source menu.  
3 Enter the Grayscale Conversion submenu.  
4 Select one of the available color conversion modes and confirm.  
Coronis Fusion 10MP 41  
Video timings  
ABOUT VIDEO TIMINGS  
Your CORONIS FUSION 10MP display automatically detects the  
connected video input signals and applies the correct timings.  
Manually configuring the video timings is possible, but then  
your display’s image source selection mode should be set to  
allow this. Please refer to “Image source selection modes”  
on page 36 to do this.  
Following video timings are available for your CORONIS FUSION 10MP  
display:  
Resolution  
Allows to manually modify the resolution  
of the image source video input signal.  
Refresh Rate  
Allows to manually select the refresh rate  
of the image source video input signal  
depending on the maximum refresh rate of  
the display controller connected to your  
display.  
Orientation  
Allows to change the orientation of the  
image source video input signal to  
landscape, portrait or to let the display  
automatically assign the correct  
orientation.  
TO MANUALLY SET VIDEO TIMINGS:  
1 Bring up the OSD main menu.  
2 Navigate to the Configuration > Image Sources > (Left/Right)  
Image Source menu.  
3 Enter the Timings submenu.  
4 Select Resolution, Refresh Rate or Orientation.  
5 Select one of the available settings and confirm.  
42 Coronis Fusion 10MP  
 
Display info  
ABOUT DISPLAY INFO  
Your display serial number, color type, native resolution, firmware  
versions, etc. are available in a dedicated submenu of the OSD menu.  
TO RETRIEVE INFO ABOUT YOUR DISPLAY:  
1 Bring up the OSD main menu.  
2 Navigate to the About this Display menu.  
3 Enter the Display or Firmware submenu as desired.  
Display status  
ABOUT DISPLAY STATUS  
The Status submenu of the OSD menu provides info on the current status  
of your display (runtimes, temperatures, etc.), the status of the  
connected image sources (video encoding mode, timings, etc.) and the  
current calibration status of your display (display function, luminance,  
ALC, etc.).  
TO RETRIEVE THE STATUS OF YOUR DISPLAY:  
1 Bring up the OSD main menu.  
2 Navigate to the Status menu.  
3 Enter the Display, Image Source or Calibration submenu as  
desired.  
Coronis Fusion 10MP 43  
   
(This page intentionally left blank.)  
44 Coronis Fusion 10MP  
Cleaning your display  
Front glass  
Before cleaning the front glass, unplug the power cable from  
the mains to prevent the keys from being activated  
inadvertently by sweeping over them.  
Clean the front glass using a sponge, cleaning cloth or soft tissue, lightly  
moistened with one of the following tested products:  
Flux  
Windex Glass Plus  
Bohle glass cleaner  
Mr. Proper  
Pril  
Ajax glass cleaner  
Sidolin glass cleaner  
In case none of the above cleaning products is available, use plain water.  
Take care not to damage or scratch the front glass. Be careful  
with rings or other jewelry and do not apply excessive pressure  
on the front glass.  
Do not apply or spray liquid directly to the front glass as excess  
liquid may cause damage to internal electronics. Instead, apply  
the liquid to the cleaning cloth.  
Coronis Fusion 10MP 45  
   
Do not use following products:  
Alcohol/solvents at higher concentration > 5%  
Strong alkalis lye, strong solvents  
Acid  
Detergents with fluoride  
Detergents with ammonia  
Detergents with abrasives  
Steel wool  
Sponge with abrasives  
Steel blades  
Cloth with steel thread  
Cabinet  
1 Clean the cabinet using a soft cotton cloth, lightly moistened with  
a recognized cleaning product for medical equipment.  
The cabinet has been tested for resistance to the following  
products:  
Cidex, Betadine  
Alcohol (Isopropyl and Ethyl)  
Ammonia-based cleaners (Windex)  
Aquasonic Gel  
In case none of the above cleaning products is available, use plain  
water.  
Do not apply or spray liquid directly to the cabinet as  
excess liquid may cause damage to internal electronics.  
Instead, apply the liquid to the cleaning cloth.  
2 Repeat with water only.  
3 Wipe dry with a dry cloth.  
46 Coronis Fusion 10MP  
 
Important information  
Safety information  
GENERAL RECOMMENDATIONS  
Read the safety and operating instructions before operating the display.  
Retain safety and operating instructions for future reference.  
Adhere to all warnings on the display and in the operating instructions  
manual.  
Follow all instructions for operation and use.  
ELECTRICAL SHOCK  
TYPE OF PROTECTION (ELECTRICAL):  
Display with external power supply: Class I equipment  
DEGREE OF SAFETY (FLAMMABLE ANESTHETIC MIXTURE):  
Equipment not suitable for use in the presence of a flammable  
anesthetic mixture with air or with oxygen or nitrous oxide.  
NON-PATIENT CARE EQUIPMENT  
Equipment primarily for use in a health care facility that is intended for  
use where contact with a patient is unlikely.  
Coronis Fusion 10MP 47  
   
POWER CONNECTION - DISPLAY WITH EXTERNAL 24 VDC POWER  
SUPPLY  
Power requirements: The display must be powered using the  
delivered medical approved 24 VDC SELV power supply.  
The medical approved DC power supply must be powered by the  
AC mains voltage (protective earth terminal).  
POWER CORDS:  
Utilize a UL-listed detachable power cord, 3-wire, type SJ or  
equivalent, 18 AWG min., rated 300 V min., provided with a  
hospital-grade type plug 5-15P configuration for 120V application,  
or 6-15P for 240V application.  
Do not overload wall outlets and extension cords as this may result  
in fire or electric shock.  
Mains lead protection (U.S.: Power cord): Power cords should be  
routed so that they are not likely to be walked upon or pinched by  
items placed upon or against them, paying particular attention to  
cords at plugs and receptacles.  
WATER AND MOISTURE  
Never expose the display to rain or moisture.  
Never use the display near water - e.g. near a bathtub, washbasin,  
swimming pool, kitchen sink, laundry tub or in a wet basement.  
VENTILATION  
Do not cover or block the ventilation openings in the cover of the set.  
When installing the display in a cupboard or another closed location,  
heed the necessary space between the set and the sides of the  
cupboard.  
INSTALLATION  
Place the display on a flat, solid and stable surface that can support the  
weight of at least 3 displays. If you use an unstable cart or stand, the  
48 Coronis Fusion 10MP  
display may fall, causing serious injury to a child or adult, and serious  
damage to the equipment.  
THIS APPARATUS CONFORMS TO:  
CE0120 (MDD 93/42/EEC class IIb product), CE - 2004/108/EC, CE - 93/  
42/EEC; A1:2007/47/EC class II b, UL 60601-1 1ST EDITION, CAN/CSA-  
C22.2 NO. 601.1-M90, IEC 60601-1 2ND ED:1988 + A1:1991 + A2:1995,  
IEC 60950-1:2005 2ND EDITION, DEMKO - EN 60601-1, CCC - GB9254-  
2008 + GB4943-2001 + GB17625.1-2003, VCCI, FCC class B, BSMI, FDA  
510K, RoHS, KC  
NATIONAL SCANDINAVIAN DEVIATIONS FOR CL. 1.7.2:  
Finland: "Laite on liitettävä suojamaadoituskoskettimilla varustettuun  
pistorasiaan"  
Norway: "Apparatet må tilkoples jordet stikkontakt"  
Sweden: "Apparaten skall anslutas till jordat uttag"  
Coronis Fusion 10MP 49  
Environmental information  
DISPOSAL INFORMATION (WASTE ELECTRICAL AND ELECTRONIC  
EQUIPMENT)  
This symbol on the product indicates that, under European  
Directive 2002/96/EC governing waste from electrical and  
electronic equipment, this product must not be disposed of  
with other municipal waste. Please dispose of your waste  
equipment by handing it over to a designated collection point  
for the recycling of waste electrical and electronic equipment. To prevent  
possible harm to the environment or human health from uncontrolled  
waste disposal, please separate these items from other types of waste  
and recycle them responsibly to promote the sustainable reuse of  
material resources.  
For more information about recycling of this product, please contact your  
local city office, your municipal waste disposal service or the shop where  
you purchased the product.  
MERCURY NOTICE  
This Barco product consists of materials that may contain mercury, which  
must be recycled or disposed of in accordance with local, state, or  
country laws:  
Within this system, the backlight lamps in the monitor display  
contain mercury  
TURKEY ROHS COMPLIANCE  
Republic of Turkey: In conformity with the EEE Regulation  
Türkiye Cumhuriyeti: EEE Yönetmeliğine Uygundur  
50 Coronis Fusion 10MP  
 
中国大陆 ROHS (CHINESE MAINLAND ROHS)  
根据中国大陆 《电子信息产品污染控制管理办法也称为中国大  
陆 RoHS以下部分列出了 Barco 产品中可能包含的有毒和 / 或有  
害物质的名称和含量。中国大陆 RoHS 指令包含在中国信息产业部  
MCV 标准:“ 电子信息产品中有毒物质的限量要求 ” 中。  
According to the "China Administration on Control of Pollution Caused by  
Electronic Information Products" (Also called RoHS of Chinese Mainland),  
the table below lists the names and contents of toxic and/or hazardous  
substances that Barco's product may contain. The RoHS of Chinese  
Mainland is included in the MCV standard of the Ministry of Information  
Industry of China, in the section "Limit Requirements of toxic substances  
in Electronic Information Products".  
零件项目 ( 名称 )  
有毒有害物质或元素  
Component Name  
Hazardous Substances or Elements  
六价铬  
多溴联苯  
多溴二苯醚  
(Pb)  
(Hg)  
(Cd)  
(Cr6+)  
(PBB)  
(PBDE)  
印制电路配件  
X
O
O
O
O
O
Printed Circuit  
Assemblies  
液晶面板  
X
X
X
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
LCD panel  
外接电 ( 线 ) 缆  
External cables  
內部线路  
O
O
O
O
O
Internal wiring  
金属外壳  
Metal enclosure  
塑胶外壳  
Plastic enclosure  
散热片 ( 器 )  
Heatsinks  
风扇  
Fan  
Coronis Fusion 10MP 51  
电源供应器  
X
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
Power supply unit  
文件说明书  
Paper manuals  
光盘说明书  
CD manual  
O: 表示该有毒有害物质在该部件所有均质材料中的含量均在 SJ/T 11363-2006 标准规定的限  
量要求以下 .  
O: Indicates that this toxic or hazardous substance contained in all of the homogeneous  
materials for this part is below the limit requirement in SJ/T11363-2006.  
X: 表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T 11363-2006 标准规  
定的限量要求 .  
X: Indicates that this toxic or hazardous substance contained in at least one of the  
homogeneous materials used for this part is above the limit requirement in SJ/T11363  
2006.  
在中国大陆销售的相应电子信息产品 (EIP)都必须遵照中国大陆  
《电子信息产品污染控制标识要求》标准贴上环保使用期限  
(EFUP)标签。Barco 产品所采用的 EFUP 标签 (请参阅实例,徽  
标内部的编号使用于制定产品)基于中国大陆的 《电子信息产品  
环保使用期限通则》标准。  
All Electronic Information Products (EIP) that are sold within Chinese  
Mainland must comply with the "Electronic Information Products  
Pollution Control Labeling Standard" of Chinese Mainland, marked with  
the Environmental Friendly Use Period (EFUP) logo. The number inside  
the EFUP logo that Barco uses (please refer to the photo) is based on the  
"Standard of Electronic Information Products Environmental Friendly Use  
Period" of Chinese Mainland.  
10  
52 Coronis Fusion 10MP  
Regulatory compliance information  
INDICATIONS FOR USE  
The CORONIS FUSION 10MP display (MDCG-10130) is intended to be used in  
displaying and viewing digital images, including digital mammography,  
for review and analysis by trained medical practitioners.  
Caution (USA): Federal law restricts this device to sale by or on the order  
of a physician or a practitioner trained on its use.  
FCC CLASS B  
This device complies with Part 15 of the FCC Rules. Operation is subject  
to the following two conditions: (1) this device may not cause harmful  
interference, and (2) this device must accept any interference received,  
including interference that may cause undesired operation.  
This equipment has been tested and found to comply with the limits for  
a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits  
are designed to provide reasonable protection against harmful  
interference in a residential installation. This equipment generates, uses  
and can radiate radio frequency energy and, if not installed and used in  
accordance with the instructions, may cause harmful interference to  
radio communications. However, there is no guarantee that interference  
will not occur in a particular installation. If this equipment does cause  
harmful interference to radio or television reception, which can be  
determined by turning the equipment off and on, the user is encouraged  
to try to correct the interference by one or more of the following  
measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from  
that to which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
CANADIAN NOTICE  
This ISM device complies with Canadian ICES-001.  
Cet appareil ISM est conforme à la norme NMB-001 du Canada.  
Coronis Fusion 10MP 53  
 
Explanation of symbols  
On the display or power supply, you may find the following symbols  
(nonrestrictive list):  
Indicates compliance to the essential  
requirements of the Directive 93/42/EEC  
0120  
Indicates compliance with Part 15 of the  
FCC rules (Class A or Class B)  
Indicates the display is approved according  
to the UL regulations  
or  
Indicates the display is approved according  
to the c-UL regulations  
or  
Indicates the display is approved according  
to the DEMKO regulations  
Indicates the display is approved according  
S&E  
to the CCC regulations  
Indicates the display is approved according  
to the VCCI regulations  
Indicates the USB connectors on the display  
Indicates the manufacturing date  
Indicates the temperature limitations for  
the display to operate within specs  
Indicates the display serial no.  
54 Coronis Fusion 10MP  
 
Consult the operating instructions  
Indicates this apparatus must not be  
thrown in the trash but must be recycled,  
according to the European WEEE (Waste  
Electrical and Electronic Equipment)  
directive  
Legal disclaimer  
Although every attempt has been made to achieve technical accuracy in  
this document, we assume no responsibility for errors that may be  
found. Our goal is to provide you with the most accurate and usable  
documentation possible; if you discover errors, please let us know.  
Barco software products are the property of Barco. They are distributed  
under copyright by Barco N.V. or Barco, Inc., for use only under the  
specific terms of a software license agreement between Barco N.V. or  
Barco Inc. and the licensee. No other use, duplication, or disclosure of a  
Barco software product, in any form, is authorized.  
The specifications of Barco products are subject to change without  
notice.  
All trademarks and registered trademarks are property of their  
respective owners.  
This document is copyrighted. All rights are reserved. Neither this  
document, nor any part of it, may be reproduced or copied in any form  
or by any means - graphical, electronic, or mechanical including  
photocopying, taping or information storage and retrieval systems -  
without written permission of Barco.  
© 2011 Barco N.V. All rights reserved.  
Coronis Fusion 10MP 55  
 
Technical specifications  
Product acronym  
Screen technology  
MDCG-10130  
TFT AM LCD Dual Domain IPS  
761 mm (29.6”)  
Active screen size  
(diagonal)  
Active screen size (H x V)  
Aspect ratio (H:V)  
Resolution  
645 x 403 mm (25.4 x 15.9“)  
16:10  
10MP (4096 x 2560)  
Pixel pitch  
0.1575 mm  
Color imaging  
Gray imaging  
No  
Yes  
Number of grayscales (LUT  
in/LUT out)  
1024 grey levels (10/12)  
Viewing angle (H, V)  
170°  
Yes  
Uniform Luminance  
Technology (ULT)  
Per Pixel Uniformity (PPU)  
No  
Ambient Light  
Yes  
Compensation (ALC)  
Backlight Output  
Yes  
Stabilization (BLOS)  
I-Guard  
Yes  
Maximum luminance  
1250 cd/m²  
500 cd/m²  
DICOM calibrated  
luminance (ULT off)  
Contrast ratio (ULT off)  
Response time (Tr + Tf)  
800:1  
35 ms  
56 Coronis Fusion 10MP  
 
Scanning frequency (H; V)  
Housing color  
30-150 kHz; 15-80 Hz  
Black/Silver  
Video input signals  
Video inout terminals  
USB ports  
DVI-D Dual Link (2x) / DisplayPort (2x)  
NA  
1 upstream (endpoint), 3 downstream  
USB standard  
2.0  
Power requirements  
(nominal)  
100-240V  
Power consumption  
(nominal)  
102W  
Power save mode  
Power management  
Dot clock  
Yes  
DVI-DMPM / DP-DMPM  
280 MHz  
OSD languages  
English, German, French, Dutch, Spanish, Italian,  
Portuguese, Polish, Russian, Swedish, Chinese  
(simplified), Japanese, Korean, Arabic  
Dimensions with stand (W  
x H x D)  
Portrait: NA  
Landscape: 731 x 580~670 x 270 mm  
Dimensions w/o stand (W  
x H x D)  
Portrait: NA  
Landscape: 731 x 485 x 125 mm  
Dimensions packaged (W x  
H x D)  
869 x 764 x 400 mm  
Net weight with stand  
Net weight w/o stand  
24.2 kg  
17.7 kg  
33.1 kg  
Net weight packaged with  
stand  
Net weight packaged w/o  
stand  
NA  
Height adjustment range  
96 mm  
Coronis Fusion 10MP 57  
Tilt  
-5° / +25°  
Swivel  
-30° / +30°  
Pivot  
NA  
Mounting standard  
Screen protection  
Recommended modalities  
Certifications  
VESA (100 mm)  
Protective, non-reflective glass cover  
CT, MR, US, DR, CR, NM, Film  
CE0120 (MDD 93/42/EEC class IIb product), CE -  
2004/108/EC, CE - 93/42/EEC; A1:2007/47/EC class  
II b, UL 60601-1 1ST EDITION, CAN/CSA-C22.2 NO.  
601.1-M90:2005, IEC 60601-1 2ND ED:1988 + A1:1991  
+ A2:1995, IEC 60950-1:2005 2ND EDITION, DEMKO -  
EN 60601-1:1990 + A1:1993 + A2:1995, CCC - GB9254-  
2008 + GB4943-2001 + GB17625.1-2003, VCCI, FCC  
class B, BSMI, FDA 510K, RoHS, KC  
Supplied accessories  
User Guide  
Quick-Installation Sheet  
Video cables (2 x DVI Dual Link, 2 x DisplayPort)  
Main cables (UK, European (CEBEC/KEMA), USA (UL/  
CSA; adaptor plug NEMA 5-15P), Chinese (CCC))  
USB 2.0 cable  
External power supply  
Optional accessories  
QA software  
NA  
MediCal QAWeb  
Unit per pallet  
NA  
Pallet dimensions  
Warranty  
NA  
5 years  
Operating temperature  
Storage temperature  
Operating humidity  
Storage humidity  
Operating altitude  
0°C to 40°C (15°C to 35°C within specs)  
-20°C to 60°C  
8% - 70% (non-condensing)  
5% - 95% (non-condensing)  
2000 m  
58 Coronis Fusion 10MP  
Warranty statement  
BARCO MID GENERAL WARRANTY TERMS AND CONDITIONS  
Applicable from Jan 1st 2008  
ARTICLE 1: PRODUCT WARRANTY  
Barco nv, Medical Imaging Division warrants that the equipment will be free of defects in workmanship or material for  
the warranty period or the specific period of a warranty extension program.  
Hardware: Barco warrants that upon delivery hereunder the Products shall (i) conform to its specifications in effect at the  
date of delivery and (ii) be free from defects in material and workmanship (the "Warranties").  
Software: Barco warrants that software written by Barco shall perform substantially in accordance with the specifications  
in effect at the date of delivery. Software is inherently susceptible to bugs and errors. Barco makes no warranties with  
respect to the software which is provided to Customer on an "as-is" basis and does not warrant uninterrupted or error-  
free operation of the Products.  
Unless otherwise indicated in Barco’s Product manual or in the agreement between Barco and Customer, the Warranty  
Period shall be  
(a) Hardware: 12 months commencing on the Barco date of invoice.  
(b) Software: 3 months commencing on the Barco date of invoice.  
Notwithstanding the provisions of clause 2, repair and replacement of defects in material and/or workmanship under this  
warranty shall be accomplished in our works according to the terms and conditions as set forth hereafter:  
1.1 Any claim under the Warranties must be notified to Barco in writing within 8 days from the date the defect or  
failure has been discovered or noticed the first time. The Customer, upon the occurrence of any equipment failure, shall  
contact Barco nv, MID customer support centre (or an authorised service centre) by telephone, fax or e-mail and shall  
provide the applicable customer support person with a complete description of the problem being encountered, including  
the model and serial number of the equipment in which the problem has arisen.  
1.2 The customer support person shall diagnose the problem experienced by the Customer and shall advise the  
Customer on how to proceed. Customer support may ask to return the faulty equipment or faulty subassemblies to the  
Barco nv, or a MID customer support centre (or an authorised service centre) for repair activities. In no event shall  
Customer return a defective Product or part thereof to Barco without Barco's prior written approval.  
In the event the return to Barco of the defective Product is authorized by Barco, Barco shall issue to Customer an RMA  
(Return Material Authorization).  
The Customer shall apply for an RMA number to the closest Barco nv, MID Customer support centre (or an authorised  
The one-way cost of packing, transport and insurance related to shipping the alleged defective Product or part to Barco  
for repair or replacement shall be borne by Customer. The one-way cost of packing, transport and insurance related to  
shipping of the repaired or replacement Product or part to Customer shall be borne by Barco.  
1.3 The Customer shall return, freight prepaid, the defective equipment or subassemblies in its original packaging with  
the assigned RMA number for repair to the Barco nv, MID Customer support centre (or an authorised service centre).  
1.4 Replacement parts used shall be new or equivalent to new parts for the revision level of the equipment. A  
replacement LCD panel will be new or similar run time. The warranty period for the replacement parts will expire at the  
same moment as the original warranty period of the equipment. All parts replaced hereunder and returned to Barco nv,  
MID (or an authorised service centre) shall become the property of Barco nv, MID (or the authorised service centre).  
1.5 The repaired equipment shall be returned to the Customer, by regular freight, at Barco nv, MID’s charge.  
1.6 Barco nv, MID will replace a product that fails within 90 days after shipment from Barco with a new one, ensuring  
color matching in the event of a diagnostic multi head display configuration.  
Barco aims to ship the new replacement product within 2 business days after receipt of the Customers notification in  
writing.  
ARTICLE 2: CONDITIONS PRECEDENT FOR WARRANTY AND ITEMS EXCLUDED FROM WARRANTY  
A.  
The Warranties shall apply only to the extent the Products or any parts thereof have  
(i) been transported and stored at all times in the original packaging in the conditions as specified by Barco (such  
as covered and secure location, minimum and maximum temperature, maximum humidity, …) or, in absence  
thereof, at least in conditions consistent with generally accepted practice for this type of products;  
(ii) been handled at all times in accordance with Barco's instructions or, in absence thereof, at least with the care  
and caution consistent with generally accepted practice for this type of products;  
(iii)been installed strictly in accordance with the instructions and directions given by Barco (if and to the extent the  
Coronis Fusion 10MP 59  
 
Products have not been installed by Barco or its authorized subcontractors);  
(iv)not been subject to any unauthorized access, alteration, modification or repair or attempts thereto;  
(v) been at all times "normally used" for the intended purpose and operated in strict accordance with the operating  
instructions set forth in the operating manual of the Product in question and shall not have been otherwise  
misused, abused, damaged. For the purpose hereof, "normally used" shall mean a regular, ordinary and routine  
usage of the Product in question as intended and/or recommended by Barco;  
(vi)been maintained at all times in accordance with Barco's instructions or, in absence thereof, at least with  
intervals and in a manner consistent with generally accepted practice for this type of products;  
B.  
The warranty described herein shall not include the following:  
2.1 Any hardware or software item procured from a source other than Barco nv, MID or their official agent or distributor  
and integrated by Customer or a third party into Barco nv, MID supplied equipment.  
2.2 Any host configuration not explicitly supported by Barco nv, MID.  
2.3 All software installed on the system, whether they are acquired from Barco nv, MID or third party. An exception is  
made for software delivered by Barco nv, MID that would prove to be a cause for the mal functioning of the hardware  
covered under this Agreement.  
2.4 Normal wear and tear, use under circumstances exceeding specifications, such as use in dusty environment or  
under excessive temperature conditions, abuse, unauthorised repair or alternation, lack of proper configuration or  
maintenance, damaged or modified or removed serial number, cosmetic refurbishment.  
1
2.5 Repair or replacement of consumables or specific parts that by definition are subject to wear and tear, including  
but not limited to:  
a. CRT’s, LCD panels  
2
b. Backlights in diagnostic LCD displays, when the backlight run time is beyond the Guaranteed Backlight  
3
4
Lifetime of that model, when used at the Factory Calibrated Luminance  
Eg1.  
A display is used at 8 hours/day; ie. +/-2.920hours/year  
The display system is covered with a warranty period of 5 year  
The Guaranteed Backlight Lifetime of that model is 17.000hours.  
The Factory Calibrated Luminance cannot be achieved anymore after 4 year, thus corresponding to +/-  
11.680hours  
Result: the backlight replacement is performed under warranty  
Eg2.  
A display is used at 24 hours/day; ie. 8.760hours/year  
The display system is covered with a warranty program of 5 year  
The Guaranteed Backlight Lifetime of that model is 17.000hours.  
The Factory Calibrated Luminance cannot be achieved anymore after 2.5years, thus corresponding to +/  
-21.900hours  
Result: the backlight replacement does not make part of the warranty coverage.  
(1): ‘Consumable’ is a part that can be replaced by the user  
(2): ‘Backlight run time’ is the total time that an image (including use of a screen saver) has been applied to the  
screen; this value can be consulted via the OSD buttons (On Screen Display).  
(3): ‘Guaranteed Backlight Lifetime’ is the number of backlight hours during which a predefined luminance  
value, ie. the Factory Calibrated Luminance, will be provided by a specific diagnostic display model. This  
figure is printed on the Warranty certificate of each display or can be requested at your local Barco office.  
(4): ‘Factory Calibrated Luminance’: is the typical luminance value that a specific diagnostic display model is  
calibrated at during the production process. This figure is printed on the Warranty certificate of each display  
or can be requested at your local Barco office.  
c. Lamps, optical components in projectors  
d. Replacement because of:  
i. image retention as a result of:  
-
not correctly using screen saver and/or Display Power Management System (DPMS) as explained in the  
user manual  
-
prolonged operation of the display with a static image on the same screen area  
ii. a number of missing pixels that is lower than the total allowable number as mentioned in the product  
specifications.  
60 Coronis Fusion 10MP  
iii. difference in color temperature that is lower than the total allowable difference as mentioned in the  
product specifications  
iv. difference in color temperature as a result of not using all displays of a multi-head configuration at the  
same rate.  
v. LCD luminance uniformity that is in within the product specifications or luminance uniformity performance  
that is inherent to LCD technology.  
Barco nv, MID does not warrant a minimum life time nor a performance of any of the consumables.  
2.6 Replacement of moveable parts such as power cords, remote controls, …  
2.7 Any product disassembly and installation costs at the operation site, travel expenses and travel time to and from  
the operation site for the personnel in charge of the repair works and transport charges.  
2.8 Any failures resulting from an accident, negligence (such as but not limited to removing or deleting system files &  
licensed software product files), misuse, circuit failure or any change, damage due to fire, water, thunder or lightning,  
power failure or fluctuation, disruption of communication lines or due to force majeure, or any reason foreign to the  
equipment.  
2.9 Any specific services or procedures, asked for by Customer, related to verification of repaired equipment.  
2.10 The evaluation cost in case of a returned product deemed functional is not covered under warranty and will be  
charged to the Customer, at Barco’s sole discretion, based on a case-by-case evaluation.  
ARTICLE 3: OBLIGATIONS OF THE CUSTOMER  
Customer hereby assumes the following obligations as partial consideration for Barco nv, MID performance of its  
requirements under the warranty condition; failure by Customer to meet its obligations under this paragraph shall excuse  
Barco nv, MID’s performance hereunder:  
3.1 Customer shall not expose Barco nv, MID personnel to any unsafe working conditions.  
3.2 Repairs to equipment under warranty resulting from improper maintenance or repair performed by the Customer,  
or its officers, agents, employees, or representatives, shall be borne by the Customer at its additional cost and expense.  
3.3 The Customer is responsible for installing the Barco nv, MID equipment in an environment for which it was  
intended. If there is an indication that the equipment was used – even temporary – outside its specifications, Barco nv,  
MID is entitled not to perform warranty repairs and terminate the warranty agreement. Any actions that have been taken  
by Barco nv, MID in this respect, may be invoiced to the Customer at normal pricing.  
ARTICLE 4: REMEDIES UNDER WARRANTY  
(a) Hardware: If during the Warranty Period a Product or any part thereof, fails to meet any of the Warranties then,  
upon Customer's request, Barco shall, at its sole option and cost, promptly and within 20 working days, either: (i) repair  
or correct the Product or part in question; or (ii) replace the Product or supply part(s) or component(s) according to the  
terms and conditions contained in article 1. A replacement part shall be at least functionally equivalent to the original  
part. The replaced Product, parts and/or components shall become the property of Barco and shall, at Barco's request, be  
returned by Customer to Barco at Barco's cost.  
(b) Software: Barco's sole obligation shall be to rectify substantial malfunctions of the software (to the extent  
technically reasonably possible) by amending the software or supplying an alternative version of the software.  
(c) The repair or replacement under the Warranties covers the cost of material and labor.  
ARTICLE 5: DISCLAIMER OF WARRANTIES  
BARCO NV, MID DISCLAIMS ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING ALL IMPLIED WARRANTIES OF  
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  
ARTICLE 6: LIMITATION OF LIABILITY  
The remedies specified in these Terms and Conditions shall constitute Customer's sole and exclusive remedy and Barco's  
sole and exclusive liability for Barco’s breach of the Warranties hereunder.  
BARCO NV, MID SHALL NOT UNDER ANY CIRCUMSTANCES BE LIABLE TO CUSTOMER OR ANY THIRD PARTY FOR DIRECT,  
INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES, SUCH AS BUT NOT LIMITED TO, DAMAGE TO OR LOSS OF  
TANGIBLE OR INTANGIBLE PROPERTY OR EQUIPMENT, LOSS OF PROFITS OR REVENUES, COST OF CAPITAL, COST OF PURCHASE  
OF REPLACEMENT GOODS, OR CLAIMS OF USER FOR SERVICE INTERRUPTIONS. THE LIABILITY OF BARCO NV, MID FOR  
MANUFACTURING, SALE, DELIVERY, RESALE, INSTALLATION, OPERATION OR SUITABILITY FOR USE OF ANY PRODUCTS OR  
SERVICES COVERED BY OR FURNISHED UNDER THIS WARRANTY CONDITION, WHETHER ARISING OUT OF CONTRACT,  
NEGLIGENCE, STRICT TORT, WARRANTY OR OTHERWISE, SHALL NOT EXCEED THE PRICE OF THE ITEM OR ITEMS OF GOODS OR  
SERVICES UPON WHICH SUCH LIABILITY IS BASED.  
ARTICLE 7: FORCE MAJEURE  
Either party shall be released from performance of its obligations under this agreement to the extent, and for so long as,  
the performance of this agreement is impeded by reason of force majeure. For the purposes of this clause the  
Coronis Fusion 10MP 61  
expression "force majeure" means, but shall not be limited to, industrial dispute, fire, mobilisation, requisition, embargo,  
currency transfer prohibitions, insurrection, lack of means of transport, restrictions of the use of energy, and generally any  
circumstances which are beyond the control of the parties and hinder performance by one party of his obligations.  
ARTICLE 8: GENERAL  
8.1 Customer acknowledges its understanding that all software and electronic devices, including Barco nv, MID products  
are subject to possible error, mechanical or electrical failure, and should not be relied upon in inappropriate applications  
or without proper backup and/or other safety precautions whenever personal injury or property damage may result from  
failure or error of the product.  
8.2 Barco nv, MID shall not be responsible for machine failure and/or its failure to render service or maintenance due to  
causes beyond its reasonable control.  
Open source license information  
This product contains software components released under an Open Source license. A copy of the source code is available  
on request by contacting your MID customer support representative at [email protected].  
The licenses are only provided in English because translations do not legally state the distribution terms for software that  
uses these licenses - only the original English text does that. However, translations in your local language are available at  
The software running in the internal processor uses the following licenses.  
GNU GENERAL PUBLIC LICENSE, Version 2, June 1991  
Copyright (C) 1989, 1991 Free Software Foundation, Inc.  
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA  
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.  
Preamble  
The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU  
General Public License is intended to guarantee your freedom to share and change free software--to make sure the  
software is free for all its users. This General Public License applies to most of the Free Software Foundation's software  
and to any other program whose authors commit to using it. (Some other Free Software Foundation software is covered  
by the GNU Lesser General Public License instead.) You can apply it to your programs, too.  
When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to  
make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that  
you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free  
programs; and that you know you can do these things.  
To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to  
surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software,  
or if you modify it.  
For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the  
rights that you have. You must make sure that they, too, receive or can get the source code. And you must show them  
these terms so they know their rights.  
We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal  
permission to copy, distribute and/or modify the software.  
Also, for each author's protection and ours, we want to make certain that everyone understands that there is no warranty  
for this free software. If the software is modified by someone else and passed on, we want its recipients to know that  
what they have is not the original, so that any problems introduced by others will not reflect on the original authors'  
reputations.  
Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of  
a free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we  
have made it clear that any patent must be licensed for everyone's free use or not licensed at all.  
The precise terms and conditions for copying, distribution and modification follow.  
GNU GENERAL PUBLIC LICENSE  
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION  
0.  
This License applies to any program or other work which contains a notice placed by the copyright holder saying it  
may be distributed under the terms of this General Public License. The "Program", below, refers to any such program or  
62 Coronis Fusion 10MP  
 
work, and a "work based on the Program" means either the Program or any derivative work under copyright law: that is  
to say, a work containing the Program or a portion of it, either verbatim or with modifications and/or translated into  
another language. (Hereinafter, translation is included without limitation in the term "modification".) Each licensee is  
addressed as "you".  
Activities other than copying, distribution and modification are not covered by this License; they are outside its scope.  
The act of running the Program is not restricted, and the output from the Program is covered only if its contents constitute  
a work based on the Program (independent of having been made by running the Program). Whether that is true depends  
on what the Program does.  
1.  
You may copy and distribute verbatim copies of the Program's source code as you receive it, in any medium,  
provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of  
warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other  
recipients of the Program a copy of this License along with the Program.  
You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in  
exchange for a fee.  
2.  
You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the  
Program, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also  
meet all of these conditions:  
a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of  
any change.  
b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the  
Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this  
License.  
c) If the modified program normally reads commands interactively when run, you must cause it, when started  
running for such interactive use in the most ordinary way, to print or display an announcement including an  
appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty)  
and that users may redistribute the program under these conditions, and telling the user how to view a copy of  
this License. (Exception: if the Program itself is interactive but does not normally print such an announcement,  
your work based on the Program is not required to print an announcement.)  
These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the  
Program, and can be reasonably considered independent and separate works in themselves, then this License, and its  
terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same  
sections as part of a whole which is a work based on the Program, the distribution of the whole must be on the terms of  
this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part  
regardless of who wrote it.  
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the  
intent is to exercise the right to control the distribution of derivative or collective works based on the Program.  
In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the  
Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License.  
3.  
You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable  
form under the terms of Sections 1 and 2 above provided that you also do one of the following:  
a) Accompany it with the complete corresponding machine-readable source code, which must be distributed  
under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or,  
b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more  
than your cost of physically performing source distribution, a complete machine-readable copy of the  
corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium  
customarily used for software interchange; or,  
c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This  
alternative is allowed only for noncommercial distribution and only if you received the program in object code  
or executable form with such an offer, in accord with Subsection b above.)  
The source code for a work means the preferred form of the work for making modifications to it. For an executable work,  
complete source code means all the source code for all modules it contains, plus any associated interface definition files,  
plus the scripts used to control compilation and installation of the executable. However, as a special exception, the  
source code distributed need not include anything that is normally distributed (in either source or binary form) with the  
major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that  
component itself accompanies the executable.  
If distribution of executable or object code is made by offering access to copy from a designated place, then offering  
equivalent access to copy the source code from the same place counts as distribution of the source code, even though  
third parties are not compelled to copy the source along with the object code.  
4.  
You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License.  
Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate  
your rights under this License. However, parties who have received copies, or rights, from you under this License will not  
Coronis Fusion 10MP 63  
have their licenses terminated so long as such parties remain in full compliance.  
5. You are not required to accept this License, since you have not signed it. However, nothing else grants you  
permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not  
accept this License. Therefore, by modifying or distributing the Program (or any work based on the Program), you  
indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying  
the Program or works based on it.  
6.  
Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a  
license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You  
may not impose any further restrictions on the recipients' exercise of the rights granted herein. You are not responsible  
for enforcing compliance by third parties to this License.  
7.  
If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to  
patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the  
conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to  
satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you  
may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution of the  
Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it  
and this License would be to refrain entirely from distribution of the Program.  
If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section  
is intended to apply and the section as a whole is intended to apply in other circumstances.  
It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest  
validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution  
system, which is implemented by public license practices. Many people have made generous contributions to the wide  
range of software distributed through that system in reliance on consistent application of that system; it is up to the  
author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot  
impose that choice.  
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.  
8.  
If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted  
interfaces, the original copyright holder who places the Program under this License may add an explicit geographical  
distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus  
excluded. In such case, this License incorporates the limitation as if written in the body of this License.  
9.  
The Free Software Foundation may publish revised and/or new versions of the General Public License from time to  
time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems  
or concerns.  
Each version is given a distinguishing version number. If the Program specifies a version number of this License which  
applies to it and "any later version", you have the option of following the terms and conditions either of that version or of  
any later version published by the Free Software Foundation. If the Program does not specify a version number of this  
License, you may choose any version ever published by the Free Software Foundation.  
10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different,  
write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to  
the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of  
preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software  
generally.  
NO WARRANTY  
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT  
PERMITTED BY APPLICABLE LAW. EXCEPT WHEN  
OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT  
WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF  
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF  
THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY  
SERVICING, REPAIR OR CORRECTION.  
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR  
ANY OTHER PARTY WHO MAY MODIFY AND/OR  
REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL,  
INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT  
NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR  
A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN  
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.  
END OF TERMS AND CONDITIONS  
GNU GENERAL PUBLIC LICENSE, Version 3, 29 June 2007  
64 Coronis Fusion 10MP  
Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>  
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.  
Preamble  
The GNU General Public License is a free, copyleft license for software and other kinds of works.  
The licenses for most software and other practical works are designed to take away your freedom to share and change  
the works. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change all  
versions of a program--to make sure it remains free software for all its users. We, the Free Software Foundation, use the  
GNU General Public License for most of our software; it applies also to any other work released this way by its authors.  
You can apply it to your programs, too.  
When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to  
make sure that you have the freedom to distribute copies of free software (and charge for them if you wish), that you  
receive source code or can get it if you want it, that you can change the software or use pieces of it in new free  
programs, and that you know you can do these things.  
To protect your rights, we need to prevent others from denying you these rights or asking you to surrender the rights.  
Therefore, you have certain responsibilities if you distribute copies of the software, or if you modify it: responsibilities to  
respect the freedom of others.  
For example, if you distribute copies of such a program, whether gratis or for a fee, you must pass on to the recipients the  
same freedoms that you received. You must make sure that they, too, receive or can get the source code. And you must  
show them these terms so they know their rights.  
Developers that use the GNU GPL protect your rights with two steps: (1) assert copyright on the software, and (2) offer  
you this License giving you legal permission to copy, distribute and/or modify it.  
For the developers' and authors' protection, the GPL clearly explains that there is no warranty for this free software. For  
both users' and authors' sake, the GPL requires that modified versions be marked as changed, so that their problems will  
not be attributed erroneously to authors of previous versions.  
Some devices are designed to deny users access to install or run modified versions of the software inside them, although  
the manufacturer can do so. This is fundamentally incompatible with the aim of protecting users' freedom to change the  
software. The systematic pattern of such abuse occurs in the area of products for individuals to use, which is precisely  
where it is most unacceptable. Therefore, we have designed this version of the GPL to prohibit the practice for those  
products. If such problems arise substantially in other domains, we stand ready to extend this provision to those domains  
in future versions of the GPL, as needed to protect the freedom of users.  
Finally, every program is threatened constantly by software patents. States should not allow patents to restrict  
development and use of software on general-purpose computers, but in those that do, we wish to avoid the special  
danger that patents applied to a free program could make it effectively proprietary. To prevent this, the GPL assures that  
patents cannot be used to render the program non-free.  
The precise terms and conditions for copying, distribution and modification follow.  
TERMS AND CONDITIONS  
0.  
Definitions.  
"This License" refers to version 3 of the GNU General Public License.  
"Copyright" also means copyright-like laws that apply to other kinds of works, such as semiconductor masks.  
"The Program" refers to any copyrightable work licensed under this License. Each licensee is addressed as "you".  
"Licensees" and "recipients" may be individuals or organizations.  
To "modify" a work means to copy from or adapt all or part of the work in a fashion requiring copyright permission, other  
than the making of an exact copy. The resulting work is called a "modified version" of the earlier work or a work "based  
on" the earlier work.  
A "covered work" means either the unmodified Program or a work based on the Program.  
To "propagate" a work means to do anything with it that, without permission, would make you directly or secondarily  
liable for infringement under applicable copyright law, except executing it on a computer or modifying a private copy.  
Propagation includes copying, distribution (with or without modification), making available to the public, and in some  
countries other activities as well.  
To "convey" a work means any kind of propagation that enables other parties to make or receive copies. Mere interaction  
with a user through a computer network, with no transfer of a copy, is not conveying.  
An interactive user interface displays "Appropriate Legal Notices" to the extent that it includes a convenient and  
prominently visible feature that (1) displays an appropriate copyright notice, and (2) tells the user that there is no  
warranty for the work (except to the extent that warranties are provided), that licensees may convey the work under this  
License, and how to view a copy of this License. If the interface presents a list of user commands or options, such as a  
menu, a prominent item in the list meets this criterion.  
1.  
Source Code.  
Coronis Fusion 10MP 65  
The "source code" for a work means the preferred form of the work for making modifications to it. "Object code" means  
any non-source form of a work.  
A "Standard Interface" means an interface that either is an official standard defined by a recognized standards body, or, in  
the case of interfaces specified for a particular programming language, one that is widely used among developers  
working in that language.  
The "System Libraries" of an executable work include anything, other than the work as a whole, that (a) is included in the  
normal form of packaging a Major Component, but which is not part of that Major Component, and (b) serves only to  
enable use of the work with that Major Component, or to implement a Standard Interface for which an implementation  
is available to the public in source code form. A "Major Component", in this context, means a major essential component  
(kernel, window system, and so on) of the specific operating system (if any) on which the executable work runs, or a  
compiler used to produce the work, or an object code interpreter used to run it.  
The "Corresponding Source" for a work in object code form means all the source code needed to generate, install, and  
(for an executable work) run the object code and to modify the work, including scripts to control those activities.  
However, it does not include the work's System Libraries, or general-purpose tools or generally available free programs  
which are used unmodified in performing those activities but which are not part of the work. For example,  
Corresponding Source includes interface definition files associated with source files for the work, and the source code for  
shared libraries and dynamically linked subprograms that the work is specifically designed to require, such as by intimate  
data communication or control flow between those subprograms and other parts of the work.  
The Corresponding Source need not include anything that users can regenerate automatically from other parts of the  
Corresponding Source.  
The Corresponding Source for a work in source code form is that same work.  
2.  
Basic Permissions.  
All rights granted under this License are granted for the term of copyright on the Program, and are irrevocable provided  
the stated conditions are met. This License explicitly affirms your unlimited permission to run the unmodified Program.  
The output from running a covered work is covered by this License only if the output, given its content, constitutes a  
covered work. This License acknowledges your rights of fair use or other equivalent, as provided by copyright law.  
You may make, run and propagate covered works that you do not convey, without conditions so long as your license  
otherwise remains in force. You may convey covered works to others for the sole purpose of having them make  
modifications exclusively for you, or provide you with facilities for running those works, provided that you comply with  
the terms of this License in conveying all material for which you do not control copyright. Those thus making or running  
the covered works for you must do so exclusively on your behalf, under your direction and control, on terms that prohibit  
them from making any copies of your copyrighted material outside their relationship with you.  
Conveying under any other circumstances is permitted solely under the conditions stated below. Sublicensing is not  
allowed; section 10 makes it unnecessary.  
3.  
Protecting Users' Legal Rights From Anti-Circumvention Law.  
No covered work shall be deemed part of an effective technological measure under any applicable law fulfilling  
obligations under article 11 of the WIPO copyright treaty adopted on 20 December 1996, or similar laws prohibiting or  
restricting circumvention of such measures.  
When you convey a covered work, you waive any legal power to forbid circumvention of technological measures to the  
extent such circumvention is effected by exercising rights under this License with respect to the covered work, and you  
disclaim any intention to limit operation or modification of the work as a means of enforcing, against the work's users,  
your or third parties' legal rights to forbid circumvention of technological measures.  
4.  
Conveying Verbatim Copies.  
You may convey verbatim copies of the Program's source code as you receive it, in any medium, provided that you  
conspicuously and appropriately publish on each copy an appropriate copyright notice; keep intact all notices stating that  
this License and any non-permissive terms added in accord with section 7 apply to the code; keep intact all notices of the  
absence of any warranty; and give all recipients a copy of this License along with the Program.  
You may charge any price or no price for each copy that you convey, and you may offer support or warranty protection for  
a fee.  
5.  
Conveying Modified Source Versions.  
You may convey a work based on the Program, or the modifications to produce it from the Program, in the form of source  
code under the terms of section 4, provided that you also meet all of these conditions:  
a) The work must carry prominent notices stating that you modified it, and giving a relevant date.  
b) The work must carry prominent notices stating that it is released under this License and any conditions added  
under section 7. This requirement modifies the requirement in section 4 to "keep intact all notices".  
c) You must license the entire work, as a whole, under this License to anyone who comes into possession of a  
copy. This License will therefore apply, along with any applicable section 7 additional terms, to the whole of the  
work, and all its parts, regardless of how they are packaged. This License gives no permission to license the  
work in any other way, but it does not invalidate such permission if you have separately received it.  
66 Coronis Fusion 10MP  
d) If the work has interactive user interfaces, each must display Appropriate Legal Notices; however, if the Program  
has interactive interfaces that do not display Appropriate Legal Notices, your work need not make them do so.  
A compilation of a covered work with other separate and independent works, which are not by their nature extensions of  
the covered work, and which are not combined with it such as to form a larger program, in or on a volume of a storage  
or distribution medium, is called an "aggregate" if the compilation and its resulting copyright are not used to limit the  
access or legal rights of the compilation's users beyond what the individual works permit. Inclusion of a covered work in  
an aggregate does not cause this License to apply to the other parts of the aggregate.  
6.  
Conveying Non-Source Forms.  
You may convey a covered work in object code form under the terms of sections 4 and 5, provided that you also convey  
the machine-readable Corresponding Source under the terms of this License, in one of these ways:  
a) Convey the object code in, or embodied in, a physical product (including a physical distribution medium),  
accompanied by the Corresponding Source fixed on a durable physical medium customarily used for software  
interchange.  
b) Convey the object code in, or embodied in, a physical product (including a physical distribution medium),  
accompanied by a written offer, valid for at least three years and valid for as long as you offer spare parts or  
customer support for that product model, to give anyone who possesses the object code either (1) a copy of the  
Corresponding Source for all the software in the product that is covered by this License, on a durable physical  
medium customarily used for software interchange, for a price no more than your reasonable cost of physically  
performing this conveying of source, or (2) access to copy the Corresponding Source from a network server at  
no charge.  
c) Convey individual copies of the object code with a copy of the written offer to provide the Corresponding  
Source. This alternative is allowed only occasionally and noncommercially, and only if you received the object  
code with such an offer, in accord with subsection 6b.  
d) Convey the object code by offering access from a designated place (gratis or for a charge), and offer equivalent  
access to the Corresponding Source in the same way through the same place at no further charge. You need  
not require recipients to copy the Corresponding Source along with the object code. If the place to copy the  
object code is a network server, the Corresponding Source may be on a different server (operated by you or a  
third party) that supports equivalent copying facilities, provided you maintain clear directions next to the object  
code saying where to find the Corresponding Source. Regardless of what server hosts the Corresponding  
Source, you remain obligated to ensure that it is available for as long as needed to satisfy these requirements.  
e) Convey the object code using peer-to-peer transmission, provided you inform other peers where the object  
code and Corresponding Source of the work are being offered to the general public at no charge under  
subsection 6d.  
A separable portion of the object code, whose source code is excluded from the Corresponding Source as a System  
Library, need not be included in conveying the object code work.  
A "User Product" is either (1) a "consumer product", which means any tangible personal property which is normally used  
for personal, family, or household purposes, or (2) anything designed or sold for incorporation into a dwelling. In  
determining whether a product is a consumer product, doubtful cases shall be resolved in favor of coverage. For a  
particular product received by a particular user, "normally used" refers to a typical or common use of that class of product,  
regardless of the status of the particular user or of the way in which the particular user actually uses, or expects or is  
expected to use, the product. A product is a consumer product regardless of whether the product has substantial  
commercial, industrial or non-consumer uses, unless such uses represent the only significant mode of use of the product.  
"Installation Information" for a User Product means any methods, procedures, authorization keys, or other information  
required to install and execute modified versions of a covered work in that User Product from a modified version of its  
Corresponding Source. The information must suffice to ensure that the continued functioning of the modified object code  
is in no case prevented or interfered with solely because modification has been made.  
If you convey an object code work under this section in, or with, or specifically for use in, a User Product, and the  
conveying occurs as part of a transaction in which the right of possession and use of the User Product is transferred to the  
recipient in perpetuity or for a fixed term (regardless of how the transaction is characterized), the Corresponding Source  
conveyed under this section must be accompanied by the Installation Information. But this requirement does not apply if  
neither you nor any third party retains the ability to install modified object code on the User Product (for example, the  
work has been installed in ROM).  
The requirement to provide Installation Information does not include a requirement to continue to provide support  
service, warranty, or updates for a work that has been modified or installed by the recipient, or for the User Product in  
which it has been modified or installed. Access to a network may be denied when the modification itself materially and  
adversely affects the operation of the network or violates the rules and protocols for communication across the network.  
Corresponding Source conveyed, and Installation Information provided, in accord with this section must be in a format  
that is publicly documented (and with an implementation available to the public in source code form), and must require  
no special password or key for unpacking, reading or copying.  
7.  
Additional Terms.  
"Additional permissions" are terms that supplement the terms of this License by making exceptions from one or more of  
its conditions. Additional permissions that are applicable to the entire Program shall be treated as though they were  
Coronis Fusion 10MP 67  
included in this License, to the extent that they are valid under applicable law. If additional permissions apply only to part  
of the Program, that part may be used separately under those permissions, but the entire Program remains governed by  
this License without regard to the additional permissions.  
When you convey a copy of a covered work, you may at your option remove any additional permissions from that copy,  
or from any part of it. (Additional permissions may be written to require their own removal in certain cases when you  
modify the work.) You may place additional permissions on material, added by you to a covered work, for which you  
have or can give appropriate copyright permission.  
Notwithstanding any other provision of this License, for material you add to a covered work, you may (if authorized by  
the copyright holders of that material) supplement the terms of this License with terms:  
a) Disclaiming warranty or limiting liability differently from the terms of sections 15 and 16 of this License; or  
b) Requiring preservation of specified reasonable legal notices or author attributions in that material or in the  
Appropriate Legal Notices displayed by works containing it; or  
c) Prohibiting misrepresentation of the origin of that material, or requiring that modified versions of such material  
be marked in reasonable ways as different from the original version; or  
d) Limiting the use for publicity purposes of names of licensors or authors of the material; or  
e) Declining to grant rights under trademark law for use of some trade names, trademarks, or service marks; or  
f) Requiring indemnification of licensors and authors of that material by anyone who conveys the material (or  
modified versions of it) with contractual assumptions of liability to the recipient, for any liability that these  
contractual assumptions directly impose on those licensors and authors.  
All other non-permissive additional terms are considered "further restrictions" within the meaning of section 10. If the  
Program as you received it, or any part of it, contains a notice stating that it is governed by this License along with a term  
that is a further restriction, you may remove that term. If a license document contains a further restriction but permits  
relicensing or conveying under this License, you may add to a covered work material governed by the terms of that  
license document, provided that the further restriction does not survive such relicensing or conveying.  
If you add terms to a covered work in accord with this section, you must place, in the relevant source files, a statement of  
the additional terms that apply to those files, or a notice indicating where to find the applicable terms.  
Additional terms, permissive or non-permissive, may be stated in the form of a separately written license, or stated as  
exceptions; the above requirements apply either way.  
8.  
Termination.  
You may not propagate or modify a covered work except as expressly provided under this License. Any attempt  
otherwise to propagate or modify it is void, and will automatically terminate your rights under this License (including any  
patent licenses granted under the third paragraph of section 11).  
However, if you cease all violation of this License, then your license from a particular copyright holder is reinstated (a)  
provisionally, unless and until the copyright holder explicitly and finally terminates your license, and (b) permanently, if  
the copyright holder fails to notify you of the violation by some reasonable means prior to 60 days after the cessation.  
Moreover, your license from a particular copyright holder is reinstated permanently if the copyright holder notifies you of  
the violation by some reasonable means, this is the first time you have received notice of violation of this License (for  
any work) from that copyright holder, and you cure the violation prior to 30 days after your receipt of the notice.  
Termination of your rights under this section does not terminate the licenses of parties who have received copies or rights  
from you under this License. If your rights have been terminated and not permanently reinstated, you do not qualify to  
receive new licenses for the same material under section 10.  
9.  
Acceptance Not Required for Having Copies.  
You are not required to accept this License in order to receive or run a copy of the Program. Ancillary propagation of a  
covered work occurring solely as a consequence of using peer-to-peer transmission to receive a copy likewise does not  
require acceptance. However, nothing other than this License grants you permission to propagate or modify any covered  
work. These actions infringe copyright if you do not accept this License. Therefore, by modifying or propagating a  
covered work, you indicate your acceptance of this License to do so.  
10. Automatic Licensing of Downstream Recipients.  
Each time you convey a covered work, the recipient automatically receives a license from the original licensors, to run,  
modify and propagate that work, subject to this License. You are not responsible for enforcing compliance by third  
parties with this License.  
An "entity transaction" is a transaction transferring control of an organization, or substantially all assets of one, or  
subdividing an organization, or merging organizations. If propagation of a covered work results from an entity  
transaction, each party to that transaction who receives a copy of the work also receives whatever licenses to the work  
the party's predecessor in interest had or could give under the previous paragraph, plus a right to possession of the  
Corresponding Source of the work from the predecessor in interest, if the predecessor has it or can get it with reasonable  
efforts.  
You may not impose any further restrictions on the exercise of the rights granted or affirmed under this License. For  
example, you may not impose a license fee, royalty, or other charge for exercise of rights granted under this License, and  
68 Coronis Fusion 10MP  
you may not initiate litigation (including a cross-claim or counterclaim in a lawsuit) alleging that any patent claim is  
infringed by making, using, selling, offering for sale, or importing the Program or any portion of it.  
11. Patents.  
A "contributor" is a copyright holder who authorizes use under this License of the Program or a work on which the  
Program is based. The work thus licensed is called the contributor's "contributor version".  
A contributor's "essential patent claims" are all patent claims owned or controlled by the contributor, whether already  
acquired or hereafter acquired, that would be infringed by some manner, permitted by this License, of making, using, or  
selling its contributor version, but do not include claims that would be infringed only as aconsequence of further  
modification of the contributor version. For purposes of this definition, "control" includes the right to grant patent  
sublicenses in a manner consistent with the requirements of this License.  
Each contributor grants you a non-exclusive, worldwide, royalty-free patent license under the contributor's essential  
patent claims, to make, use, sell, offer for sale, import and otherwise run, modify and propagate the contents of its  
contributor version.  
In the following three paragraphs, a "patent license" is any express agreement or commitment, however denominated,  
not to enforce a patent (such as an express permission to practice a patent or covenant not to sue for patent  
infringement). To "grant" such a patent license to a party means to make such an agreement or commitment not to  
enforce a patent against the party.  
If you convey a covered work, knowingly relying on a patent license, and the Corresponding Source of the work is not  
available for anyone to copy, free of charge and under the terms of this License, through a publicly available network  
server or other readily accessible means, then you must either (1) cause the Corresponding Source to be so available, or  
(2) arrange to deprive yourself of the benefit of the patent license for this particular work, or (3) arrange, in a manner  
consistent with the requirements of this License, to extend the patent license to downstream recipients. "Knowingly  
relying" means you have actual knowledge that, but for the patent license, your conveying the covered work in a country,  
or your recipient's use of the covered work in a country, would infringe one or more identifiable patents in that country  
that you have reason to believe are valid.  
If, pursuant to or in connection with a single transaction or arrangement, you convey, or propagate by procuring  
conveyance of, a covered work, and grant a patent license to some of the parties receiving the covered work authorizing  
them to use, propagate, modify or convey a specific copy of the covered work, then the patent license you grant is  
automatically extended to all recipients of the covered work and works based on it.  
A patent license is "discriminatory" if it does not include within the scope of its coverage, prohibits the exercise of, or is  
conditioned on the non-exercise of one or more of the rights that are specifically granted under this License. You may  
not convey a covered work if you are a party to an arrangement with a third party that is in the business of distributing  
software, under which you make payment to the third party based on the extent of your activity of conveying the work,  
and under which the third party grants, to any of the parties who would receive the covered work from you, a  
discriminatory patent license (a) in connection with copies of the covered work conveyed by you (or copies made from  
those copies), or (b) primarily for and in connection with specific products or compilations that contain the covered work,  
unless you entered into that arrangement, or that patent license was granted, prior to 28 March 2007.  
Nothing in this License shall be construed as excluding or limiting any implied license or other defenses to infringement  
that may otherwise be available to you under applicable patent law.  
12. No Surrender of Others' Freedom.  
If conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this  
License, they do not excuse you from the conditions of this License. If you cannot convey a covered work so as to satisfy  
simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may  
not convey it at all. For example, if you agree to terms that obligate you to collect a royalty for further conveying from  
those to whom you convey the Program, the only way you could satisfy both those terms and this License would be to  
refrain entirely from conveying the Program.  
13. Use with the GNU Affero General Public License.  
Notwithstanding any other provision of this License, you have permission to link or combine any covered work with a  
work licensed under version 3 of the GNU Affero General Public License into a single combined work, and to convey the  
resulting work. The terms of this License will continue to apply to the part which is the covered work, but the special  
requirements of the GNU Affero General Public License, section 13, concerning interaction through a network will apply to  
the combination as such.  
14. Revised Versions of this License.  
The Free Software Foundation may publish revised and/or new versions of the GNU General Public License from time to  
time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems  
or concerns.  
Each version is given a distinguishing version number. If the Program specifies that a certain numbered version of the  
GNU General Public License "or any later version" applies to it, you have the option of following the terms and conditions  
either of that numbered version or of any later version published by the Free Software Foundation. If the Program does  
not specify a version number of the GNU General Public License, you may choose any version ever published by the Free  
Software Foundation.  
Coronis Fusion 10MP 69  
If the Program specifies that a proxy can decide which future versions of the GNU General Public License can be used,  
that proxy's public statement of acceptance of a version permanently authorizes you to choose that version for the  
Program.  
Later license versions may give you additional or different permissions. However, no additional obligations are imposed  
on any author or copyright holder as a result of your choosing to follow a later version.  
15. Disclaimer of Warranty.  
THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE  
STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY  
OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF  
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF  
THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY  
SERVICING, REPAIR OR CORRECTION.  
16. Limitation of Liability.  
IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY  
OTHER PARTY WHO MODIFIES AND/OR CONVEYS THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,  
INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO  
USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES  
SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF  
SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.  
17. Interpretation of Sections 15 and 16.  
If the disclaimer of warranty and limitation of liability provided above cannot be given local legal effect according to their  
terms, reviewing courts shall apply local law that most closely approximates an absolute waiver of all civil liability in  
connection with the Program, unless a warranty or assumption of liability accompanies a copy of the Program in return  
for a fee.  
END OF TERMS AND CONDITIONS  
GNU LESSER GENERAL PUBLIC LICENSE, Version 2.1, February 1999  
Copyright (C) 1991, 1999 Free Software Foundation, Inc.  
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA  
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.  
[This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library Public License,  
version 2, hence the version number 2.1.]  
Preamble  
The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU  
General Public Licenses are intended to guarantee your freedom to share and change free software--to make sure the  
software is free for all its users.  
This license, the Lesser General Public License, applies to some specially designated software packages--typically  
libraries--of the Free Software Foundation and other authors who decide to use it. You can use it too, but we suggest you  
first think carefully about whether this license or the ordinary General Public License is the better strategy to use in any  
particular case, based on the explanations below.  
When we speak of free software, we are referring to freedom of use, not price. Our General Public Licenses are designed  
to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish);  
that you receive source code or can get it if you want it; that you can change the software and use pieces of it in new  
free programs; and that you are informed that you can do these things.  
To protect your rights, we need to make restrictions that forbid distributors to deny you these rights or to ask you to  
surrender these rights. These restrictions translate to certain responsibilities for you if you distribute copies of the library  
or if you modify it.  
For example, if you distribute copies of the library, whether gratis or for a fee, you must give the recipients all the rights  
that we gave you. You must make sure that they, too, receive or can get the source code. If you link other code with the  
library, you must provide complete object files to the recipients, so that they can relink them with the library after making  
changes to the library and recompiling it. And you must show them these terms so they know their rights.  
We protect your rights with a two-step method: (1) we copyright the library, and (2) we offer you this license, which  
gives you legal permission to copy, distribute and/or modify the library.  
To protect each distributor, we want to make it very clear that there is no warranty for the free library. Also, if the library  
is modified by someone else and passed on, the recipients should know that what they have is not the original version,  
so that the original author's reputation will not be affected by problems that might be introduced by others.  
Finally, software patents pose a constant threat to the existence of any free program. We wish to make sure that a  
company cannot effectively restrict the users of a free program by obtaining a restrictive license from a patent holder.  
70 Coronis Fusion 10MP  
Therefore, we insist that any patent license obtained for a version of the library must be consistent with the full freedom  
of use specified in this license.  
Most GNU software, including some libraries, is covered by the ordinary GNU General Public License. This license, the  
GNU Lesser General Public License, applies to certain designated libraries, and is quite different from the ordinary General  
Public License. We use this license for certain libraries in order to permit linking those libraries into non-free programs.  
When a program is linked with a library, whether statically or using a shared library, the combination of the two is legally  
speaking a combined work, a derivative of the original library. The ordinary General Public License therefore permits such  
linking only if the entire combination fits its criteria of freedom. The Lesser General Public License permits more lax  
criteria for linking other code with the library.  
We call this license the "Lesser" General Public License because it does Less to protect the user's freedom than the  
ordinary General Public License. It also provides other free software developers Less of an advantage over competing  
non-free programs. These disadvantages are the reason we use the ordinary General Public License for many libraries.  
However, the Lesser license provides advantages in certain special circumstances.  
For example, on rare occasions, there may be a special need to encourage the widest possible use of a certain library, so  
that it becomes a de-facto standard. To achieve this, non-free programs must be allowed to use the library. A more  
frequent case is that a free library does the same job as widely used non-free libraries. In this case, there is little to gain  
by limiting the free library to free software only, so we use the Lesser General Public License.  
In other cases, permission to use a particular library in non-free programs enables a greater number of people to use a  
large body of free software. For example, permission to use the GNU C Library in non-free programs enables many more  
people to use the whole GNU operating system, as well as its variant, the GNU/Linux operating system.  
Although the Lesser General Public License is Less protective of the users' freedom, it does ensure that the user of a  
program that is linked with the Library has the freedom and the wherewithal to run that program using a modified  
version of the Library.  
The precise terms and conditions for copying, distribution and modification follow. Pay close attention to the difference  
between a "work based on the library" and a "work that uses the library". The former contains code derived from the  
l i b r a r y, w h e r e a s t h e l a t t e r m u s t b e c o m b i n e d w i t h t h e l i b r a r y i n o r d e r t o r u n .  
GNU LESSER GENERAL PUBLIC LICENSE  
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION  
0.  
This License Agreement applies to any software library or other program which contains a notice placed by the  
copyright holder or other authorized party saying it may be distributed under the terms of this Lesser General Public  
License (also called "this License"). Each licensee is addressed as "you".  
A "library" means a collection of software functions and/or data prepared so as to be conveniently linked with application  
programs (which use some of those functions and data) to form executables.  
The "Library", below, refers to any such software library or work which has been distributed under these terms. A "work  
based on the Library" means either the Library or any derivative work under copyright law: that is to say, a work  
containing the Library or a portion of it, either verbatim or with modifications and/or translated straightforwardly into  
another language. (Hereinafter, translation is included without limitation in the term "modification".)  
"Source code" for a work means the preferred form of the work for making modifications to it. For a library, complete  
source code means all the source code for all modules it contains, plus any associated interface definition files, plus the  
scripts used to control compilation and installation of the library.  
Activities other than copying, distribution and modification are not covered by this License; they are outside its scope.  
The act of running a program using the Library is not restricted, and output from such a program is covered only if its  
contents constitute a work based on the Library (independent of the use of the Library in a tool for writing it). Whether  
that is true depends on what the Library does and what the program that uses the Library does.  
1.  
You may copy and distribute verbatim copies of the Library's complete source code as you receive it, in any  
medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and  
disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and  
distribute a copy of this License along with the Library.  
You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in  
exchange for a fee.  
2.  
You may modify your copy or copies of the Library or any portion of it, thus forming a work based on the Library,  
and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all  
of these conditions:  
a) The modified work must itself be a software library.  
b) You must cause the files modified to carry prominent notices stating that you changed the files and the date of  
any change.  
c) You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this  
License.  
d) If a facility in the modified Library refers to a function or a table of data to be supplied by an application  
Coronis Fusion 10MP 71  
program that uses the facility, other than as an argument passed when the facility is invoked, then you must  
make a good faith effort to ensure that, in the event an application does not supply such function or table, the  
facility still operates, and performs whatever part of its purpose remains meaningful.  
(For example, a function in a library to compute square roots has a purpose that is entirely well-defined independent of  
the application. Therefore, Subsection 2d requires that any application-supplied function or table used by this function  
must be optional: if the application does not supply it, the square root function must still compute square roots.)  
These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the  
Library, and can be reasonably considered independent and separate works in themselves, then this License, and its  
terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same  
sections as part of a whole which is a work based on the Library, the distribution of the whole must be on the terms of  
this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part  
regardless of who wrote it.  
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the  
intent is to exercise the right to control the distribution of derivative or collective works based on the Library.  
In addition, mere aggregation of another work not based on the Library with the Library (or with a work based on the  
Library) on a volume of a storage or distribution medium does not bring the other work under the scope of this License.  
3.  
You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy  
of the Library. To do this, you must alter all the notices that refer to this License, so that they refer to the ordinary GNU  
General Public License, version 2, instead of to this License. (If a newer version than version 2 of the ordinary GNU  
General Public License has appeared, then you can specify that version instead if you wish.) Do not make any other  
change in these notices.  
Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU General Public License  
applies to all subsequent copies and derivative works made from that copy.  
This option is useful when you wish to copy part of the code of the Library into a program that is not a library.  
4.  
You may copy and distribute the Library (or a portion or derivative of it, under Section 2) in object code or  
executable form under the terms of Sections 1 and 2 above provided that you accompany it with the complete  
corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a  
medium customarily used for software interchange.  
If distribution of object code is made by offering access to copy from a designated place, then offering equivalent access  
to copy the source code from the same place satisfies the requirement to distribute the source code, even though third  
parties are not compelled to copy the source along with the object code.  
5.  
A program that contains no derivative of any portion of the Library, but is designed to work with the Library by  
being compiled or linked with it, is called a "work that uses the Library". Such a work, in isolation, is not a derivative  
work of the Library, and therefore falls outside the scope of this License.  
However, linking a "work that uses the Library" with the Library creates an executable that is a derivative of the Library  
(because it contains portions of the Library), rather than a "work that uses the library". The executable is therefore  
covered by this License. Section 6 states terms for distribution of such executables.  
When a "work that uses the Library" uses material from a header file that is part of the Library, the object code for the  
work may be a derivative work of the Library even though the source code is not. Whether this is true is especially  
significant if the work can be linked without the Library, or if the work is itself a library. The threshold for this to be true  
is not precisely defined by law.  
If such an object file uses only numerical parameters, data structure layouts and accessors, and small macros and small  
inline functions (ten lines or less in length), then the use of the object file is unrestricted, regardless of whether it is  
legally a derivative work. (Executables containing this object code plus portions of the Library will still fall under Section  
6.)  
Otherwise, if the work is a derivative of the Library, you may distribute the object code for the work under the terms of  
Section 6. Any executables containing that work also fall under Section 6, whether or not they are linked directly with the  
Library itself.  
6.  
As an exception to the Sections above, you may also combine or link a "work that uses the Library" with the Library  
to produce a work containing portions of the Library, and distribute that work under terms of your choice, provided that  
the terms permit modification of the work for the customer's own use and reverse engineering for debugging such  
modifications.  
You must give prominent notice with each copy of the work that the Library is used in it and that the Library and its use  
are covered by this License. You must supply a copy of this License. If the work during execution displays copyright  
notices, you must include the copyright notice for the Library among them, as well as a reference directing the user to  
the copy of this License. Also, you must do one of these things:  
a) Accompany the work with the complete corresponding machine-readable source code for the Library including  
whatever changes were used in the work (which must be distributed under Sections 1 and 2 above); and, if the  
work is an executable linked with the Library, with the complete machine-readable "work that uses the Library",  
as object code and/or source code, so that the user can modify the Library and then relink to produce a  
modified executable containing the modified Library. (It is understood that the user who changes the contents  
72 Coronis Fusion 10MP  
of definitions files in the Library will not necessarily be able to recompile the application to use the modified  
definitions.)  
b) Use a suitable shared library mechanism for linking with the Library. A suitable mechanism is one that (1) uses  
at run time a copy of the library already present on the user's computer system, rather than copying library  
functions into the executable, and (2) will operate properly with a modified version of the library, if the user  
installs one, as long as the modified version is interface-compatible with the version that the work was made  
with.  
c) Accompany the work with a written offer, valid for at least three years, to give the same user the materials  
specified in Subsection 6a, above, for a charge no more than the cost of performing this distribution.  
d) If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to  
copy the above specified materials from the same place.  
e) Verify that the user has already received a copy of these materials or that you have already sent this user a  
copy.  
For an executable, the required form of the "work that uses the Library" must include any data and utility programs  
needed for reproducing the executable from it. However, as a special exception, the materials to be distributed need not  
include anything that is normally distributed (in either source or binary form) with the major components (compiler,  
kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the  
executable.  
It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do not normally  
accompany the operating system. Such a contradiction means you cannot use both them and the Library together in an  
executable that you distribute.  
7.  
You may place library facilities that are a work based on the Library side-by-side in a single library together with  
other library facilities not covered by this License, and distribute such a combined library, provided that the separate  
distribution of the work based on the Library and of the other library facilities is otherwise permitted, and provided that  
you do these two things:  
a) Accompany the combined library with a copy of the same work based on the Library, uncombined with any  
other library facilities. This must be distributed under the terms of the Sections above.  
b) Give prominent notice with the combined library of the fact that part of it is a work based on the Library, and  
explaining where to find the accompanying uncombined form of the same work.  
8.  
You may not copy, modify, sublicense, link with, or distribute the Library except as expressly provided under this  
License. Any attempt otherwise to copy, modify, sublicense, link with, or distribute the Library is void, and will  
automatically terminate your rights under this License. However, parties who have received copies, or rights, from you  
under this License will not have their licenses terminated so long as such parties remain in full compliance.  
9.  
You are not required to accept this License, since you have not signed it. However, nothing else grants you  
permission to modify or distribute the Library or its derivative works. These actions are prohibited by law if you do not  
accept this License. Therefore, by modifying or distributing the Library (or any work based on the Library), you indicate  
your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Library  
or works based on it.  
10. Each time you redistribute the Library (or any work based on the Library), the recipient automatically receives a  
license from the original licensor to copy, distribute, link with or modify the Library subject to these terms and conditions.  
You may not impose any further restrictions on the recipients' exercise of the rights granted herein. You are not  
responsible for enforcing compliance by third parties with this License.  
11. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to  
patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the  
conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to  
satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you  
may not distribute the Library at all. For example, if a patent license would not permit royalty-free redistribution of the  
Library by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and  
this License would be to refrain entirely from distribution of the Library.  
If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section  
is intended to apply, and the section as a whole is intended to apply in other circumstances.  
It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest  
validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution  
system which is implemented by public license practices. Many people have made generous contributions to the wide  
range of software distributed through that system in reliance on consistent application of that system; it is up to the  
author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot  
impose that choice.  
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.  
12. If the distribution and/or use of the Library is restricted in certain countries either by patents or by copyrighted  
interfaces, the original copyright holder who places the Library under this License may add an explicit geographical  
distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus  
Coronis Fusion 10MP 73  
excluded. In such case, this License incorporates the limitation as if written in the body of this License.  
13. The Free Software Foundation may publish revised and/or new versions of the Lesser General Public License from  
time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new  
problems or concerns.  
Each version is given a distinguishing version number. If the Library specifies a version number of this License which  
applies to it and "any later version", you have the option of following the terms and conditions either of that version or of  
any later version published by the Free Software Foundation. If the Library does not specify a license version number,  
you may choose any version ever published by the Free Software Foundation.  
14. If you wish to incorporate parts of the Library into other free programs whose distribution conditions are  
incompatible with these, write to the author to ask for permission. For software which is copyrighted by the Free  
Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will  
be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the  
sharing and reuse of software generally.  
NO WARRANTY  
15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE LIBRARY, TO THE EXTENT  
PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER  
PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT  
NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE  
RISK AS TO THE QUALITY AND PERFORMANCE OF THE LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU  
ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.  
16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR  
ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU FOR  
DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR  
INABILITY TO USE THE LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR  
LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE),  
EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.  
END OF TERMS AND CONDITIONS  
GNU LESSER GENERAL PUBLIC LICENSE, Version 3, 29 June 2007  
Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>  
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.  
This version of the GNU Lesser General Public License incorporates the terms and conditions of version 3 of the GNU  
General Public License, supplemented by the additional permissions listed below.  
0.  
Additional Definitions.  
As used herein, "this License" refers to version 3 of the GNU Lesser General Public License, and the "GNU GPL" refers to  
version 3 of the GNU General Public License.  
"The Library" refers to a covered work governed by this License, other than an Application or a Combined Work as defined  
below.  
An "Application" is any work that makes use of an interface provided by the Library, but which is not otherwise based on  
the Library. Defining a subclass of a class defined by the Library is deemed a mode of using an interface provided by the  
Library.  
A "Combined Work" is a work produced by combining or linking an Application with the Library. The particular version of  
the Library with which the Combined Work was made is also called the "Linked Version".  
The "Minimal Corresponding Source" for a Combined Work means the Corresponding Source for the Combined Work,  
excluding any source code for portions of the Combined Work that, considered in isolation, are based on the Application,  
and not on the Linked Version.  
The "Corresponding Application Code" for a Combined Work means the object code and/or source code for the  
Application, including any data and utility programs needed for reproducing the Combined Work from the Application, but  
excluding the System Libraries of the Combined Work.  
1.  
You may convey a covered work under sections 3 and 4 of this License without being bound by section 3 of the GNU GPL.  
2. Conveying Modified Versions.  
Exception to Section 3 of the GNU GPL.  
If you modify a copy of the Library, and, in your modifications, a facility refers to a function or data to be supplied by an  
Application that uses the facility (other than as an argument passed when the facility is invoked), then you may convey a  
copy of the modified version:  
a) under this License, provided that you make a good faith effort to ensure that, in the event an Application does  
not supply the function or data, the facility still operates, and performs whatever part of its purpose remains  
meaningful, or  
74 Coronis Fusion 10MP  
b) under the GNU GPL, with none of the additional permissions of this License applicable to that copy.  
Object Code Incorporating Material from Library Header Files.  
3.  
The object code form of an Application may incorporate material from a header file that is part of the Library. You may  
convey such object code under terms of your choice, provided that, if the incorporated material is not limited to  
numerical parameters, data structure layouts and accessors, or small macros, inline functions and templates (ten or fewer  
lines in length), you do both of the following:  
a) Give prominent notice with each copy of the object code that the Library is used in it and that the Library and its  
use are covered by this License.  
b) Accompany the object code with a copy of the GNU GPL and this license document.  
4.  
Combined Works.  
You may convey a Combined Work under terms of your choice that, taken together, effectively do not restrict  
modification of the portions of the Library contained in the Combined Work and reverse engineering for debugging such  
modifications, if you also do each of the following:  
a) Give prominent notice with each copy of the Combined Work that the Library is used in it and that the Library  
and its use are covered by this License.  
b) Accompany the Combined Work with a copy of the GNU GPL and this license document.  
c) For a Combined Work that displays copyright notices during execution, include the copyright notice for the  
Library among these notices, as well as a reference directing the user to the copies of the GNU GPL and this  
license document.  
d) Do one of the following:  
0) Convey the Minimal Corresponding Source under the terms of this License, and the Corresponding  
Application Code in a form suitable for, and under terms that permit, the user to recombine or relink the  
Application with a modified version of the Linked Version to produce a modified Combined Work, in the  
manner specified by section 6 of the GNU GPL for conveying Corresponding Source.  
1) Use a suitable shared library mechanism for linking with the Library. A suitable mechanism is one that (a)  
uses at run time a copy of the Library already present on the user's computer system, and (b) will operate  
properly with a modified version of the Library that is interface-compatible with the Linked Version.  
e) Provide Installation Information, but only if you would otherwise be required to provide such information under  
section 6 of the GNU GPL, and only to the extent that such information is necessary to install and execute a  
modified version of the Combined Work produced by recombining or relinking the Application with a modified  
version of the Linked Version. (If you use option 4d0, the Installation Information must accompany the Minimal  
Corresponding Source and Corresponding Application Code. If you use option 4d1, you must provide the  
Installation Information in the manner specified by section 6 of the GNU GPL for conveying Corresponding  
Source.)  
5.  
Combined Libraries.  
You may place library facilities that are a work based on the Library side by side in a single library together with other  
library facilities that are not Applications and are not covered by this License, and convey such a combined library under  
terms of your choice, if you do both of the following:  
a) Accompany the combined library with a copy of the same work based on the Library, uncombined with any  
other library facilities, conveyed under the terms of this License.  
b) Give prominent notice with the combined library that part of it is a work based on the Library, and explaining  
where to find the accompanying uncombined form of the same work.  
6.  
Revised Versions of the GNU Lesser General Public License.  
The Free Software Foundation may publish revised and/or new versions of the GNU Lesser General Public License from  
time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new  
problems or concerns.  
Each version is given a distinguishing version number. If the Library as you received it specifies that a certain numbered  
version of the GNU Lesser General Public License "or any later version" applies to it, you have the option of following the  
terms and conditions either of that published version or of any later version published by the Free Software Foundation.  
If the Library as you received it does not specify a version number of the GNU Lesser General Public License, you may  
choose any version of the GNU Lesser General Public License ever published by the Free Software Foundation.  
If the Library as you received it specifies that a proxy can decide whether future versions of the GNU Lesser General  
Public License shall apply, that proxy's public statement of acceptance of any version is permanent authorization for you  
to choose that version for the Library.  
Coronis Fusion 10MP 75  
76 Coronis Fusion 10MP  
Coronis Fusion 10MP 77  
78 Coronis Fusion 10MP  
Coronis Fusion 10MP 79  
K5902031-00  
May 2011  
Barco n.v.  
President Kennedypark 35  
8500 Kortrijk  
Belgium  
0120  

Hanns G Computer Monitor HSG1085 User Manual
Hanns G Computer Monitor HP222 User Manual
Fujitsu PDS5003U User Manual
Fujitsu Computer Hardware M600 User Manual
Electrolux FCG061 User Manual
ClearOne comm MAX Wireless 910 158 276 User Manual
Clarion CJ 5600E User Manual
Cisco Systems Cisco 9951 Unified Video Ip Phone CP9951CCAMK9 User Manual
Black Box Computer Hardware LMC5182C R3 User Manual
A T International CL82601 User Manual