BT Freelance XD ~ 3rd Edition ~ 2nd August ’02 ~ 4832
This product is not DECT
GAP compatible. It cannot
be registered to any other
DECT GAP telephone and
it is not possible to register
additional handsets.
This equipment is not designed for making emergency telephone calls
when the power fails. Alternative arrangements should be made for
access to emergency services.
This product is intended for connection to analogue public switched
telephone networks and private switchboards in the United Kingdom.
BT Freelance
User
Guide
XD 100/ 100 Twin
Digital Cordless Telephone
BT Freelance XD ~ 3rd Edition ~ 2nd August ’02 ~ 4832
Please open this page for an ‘At a glance’
guide to your BT Freelance XD 100
BT Freelance XD ~ 3rd Edition ~ 2nd August ’02 ~ 4832
BT Freelance XD ~ 3rd Edition ~ 2nd August ’02 ~ 4832
At a glance
BT Freelance XD 100 Handset
Redial/Pause button
Red light
Indicates that the phone
is ringing or in use.
Press to redial the last number
called. Also, press to dial or
store a pause in a number.
Handset display
Quickdial button
Displays the status
of your handset.
Use to store up to 10 numbers
that can then be dialled at the
touch of two buttons.
Volume button
In idle mode use to adjust the
handset ringer volume.
Quickdial
Redial
Volume
Delete/Secrecy button
P
Use to delete digits entered
incorrectly and numbers in the
Calls list. Also used to mute a call
so the caller cannot hear you talk
to someone close by.
During a call, use to adjust the
earpiece speech volume.
ᮡ
ᮢ
Del
Secrecy
Talk button
DEF
1
3
6
9
ABC
JKL
Use to make, receive and
end calls.
2
5
8
Calls list button
GHI
MNO
4
Press to enter the Calls list, to
view the last 10 calls/most recent
calls. Also use to scroll up and
down through the Calls list.
Keypad
PQRS
WXYZ
7
TUV
Int button
0
Recall button
Use to make an internal call or to
transfer a call to the BT Freelance XD
100 additional handset (feature only
available if you have purchased the
BT Freelance XD 100 Twin).
R
Int
For use with a switchboard/PBX
and some BT Select Services.
Also use to exit the Calls list.
1
2
BT Freelance XD ~ 3rd Edition ~ 2nd August ’02 ~ 4832
Quick guide to the handset
display icons
Batteries are charged
Batteries are exhausted and require charging
Batteries are being charged
Switches off when batteries are fully charged
Handset is in use
Flashes to indicate an external incoming call
Steady during an external call
Flashes to indicate an internal call
Indicates you are dialling or storing a
number in the Quickdial memory
Secrecy feature is switched on
Steady when viewing the Calls list
Flashes when a new call has been received
in the Calls list
Steady when handset is in range of the base
Flashes when the handset is out of range of
the base
4
BT Freelance XD ~ 3rd Edition ~ 2nd August ’02 ~ 4832
In this guide
At a glance
1
Introduction
6
Unpacking
For your records
7
8
Safety information
Setting up
9
11
18
Using the telephone
Making and receiving calls
Secrecy
Last number redial
Paging
18
20
20
21
22
Quickdial memory
Caller Display
24
26
Handset settings
Using the BT Freelance XD 100
additional handset
27
Internal calls
Transferring calls
27
28
Help
29
31
General information
Guarantee
31
32
32
33
33
33
Technical information
Switchboard compatibility
Switchboard external line access code
Setting pauses
Recall
Index
34
5
BT Freelance XD ~ 3rd Edition ~ 2nd August ’02 ~ 4832
Introduction
Your BT Freelance XD 100 is designed for ease of use and
made to the high standards set by BT.
You can expect your BT Freelance XD 100 to provide many
years of quality service. Please read the instructions
carefully before use and keep this user guide for future
reference.
DECT
By purchasing the BT Freelance XD 100 you now own a
product which combines the advantages of cordless
operation with the performance of a high quality corded
telephone. It complies with the Digitally Enhanced
Cordless Telecommunications (DECT) standard and offers
unparalleled quality and features.
This user guide applies to both the BT Freelance XD 100
and BT Freelance XD 100 Twin telephones. Please note the
BT Freelance XD 100 range of telephones are non GAP
compatible. Please refer to page 27 for further information.
6
BT Freelance XD ~ 3rd Edition ~ 2nd August ’02 ~ 4832
Unpacking your BT Freelance XD 100
or BT Freelance XD 100 Twin
Check that your BT Freelance XD 100 is complete.
If anything is missing, please contact your place of
purchase immediately.
BT Freelance XD 100 handset
BT Freelance XD 100 base
Power supply for the base
(Item code 872260)
Telephone line cord
2 x AAA rechargeable batteries (NiMH)
7
BT Freelance XD ~ 3rd Edition ~ 2nd August ’02 ~ 4832
Additionally if you have purchased the BT Freelance XD 100 Twin:
BT Freelance XD 100 Twin additional handset
BT Freelance XD 100 Twin charger
Power supply for the charger
(Item code 003313)
2 x AAA rechargeable batteries (NiMH)
For your records
Date of purchase:
Place of purchase:
Serial number:
(on the underside of the base)
For guarantee purposes proof of purchase is required, so
please keep your receipt.
Helpline
If you have problems with your phone, please call the BT
Freelance XD 100 Helpline on 08706 058 047.
8
BT Freelance XD ~ 3rd Edition ~ 2nd August ’02 ~ 4832
Safety information
General
Only use the power supply included with the product.
Using an unauthorised power supply will invalidate your
guarantee and may damage the telephone. The item
number for the base is 872260. The item number for the
charger is 003313 (only applicable if you have purchased
the BT Freelance 100 XD Twin).
For the handset use only approved Nickel Metal
Hydride (NiMH) rechargeable batteries. Never use
other batteries or conventional alkaline batteries. They
could lead to a short circuit or destroy the battery
casing. Recommended batteries should have a power
rating of 550mAh 1.2V. Batteries are available from the
BT Freelance XD 100 Helpline 08706 058 047.
Do not open the handset or base. This could expose you
to high voltages or other risks. Contact the helpline for
all repairs.
Radio signals transmitted between the handset and base
may cause interference to hearing aids.
It is recommended that advice from a qualified expert
be sought before using this product in the vicinity of
emergency/intensive care medical equipment.
It is recommended that if you have a pacemaker fitted
you check with a medical expert before using this
product.
Never dispose of batteries in a fire. There is a serious
risk of explosion and/or the release of highly toxic
chemicals.
9
BT Freelance XD ~ 3rd Edition ~ 2nd August ’02 ~ 4832
Cleaning
Simply clean the handset and base with a damp (not wet)
cloth, or an anti-static wipe.
Never use household polish as this will damage the
product.
Never use a dry cloth as this may cause a static shock.
Environmental
Do not expose to direct sunlight.
The product may heat up when the batteries are being
recharged. This is normal. However, we recommend
that you do not place the product on antique/veneered
wood to avoid damage.
Do not stand your product on carpets or other surfaces
which generate fibres, or place it in locations preventing
free flow of air over its surfaces.
Do not submerge any part of your product in water and
do not use it in damp or humid conditions, such as in
bathrooms.
Do not expose your product to fire, explosive or other
hazardous conditions.
There is a slight chance that your phone could be
damaged by an electrical storm. We recommend that
you unplug the power and telephone line cord for the
duration of the storm.
10
BT Freelance XD ~ 3rd Edition ~ 2nd August ’02 ~ 4832
Setting up
Follow these steps to set up your BT Freelance XD 100
ready for use.
Plan the location
Situate your product close enough to the telephone and
mains power supply sockets so that the cables will reach.
Make sure the product is at least 1 metre away from other
electrical products to avoid interference.
Do not place your BT Freelance XD 100 in the bathroom or
other humid areas.
1
Connect the power supply cable
Plug the power supply cable into the power socket
on your BT Freelance XD 100 base (Item number
872260). The power light on the base will
come on.
Plug the power supply adaptor into
the wall socket
2
11
BT Freelance XD ~ 3rd Edition ~ 2nd August ’02 ~ 4832
Warning
Do not connect the telephone line cord to the phone socket
until your handset is fully charged. This will prevent the
risk of the phone being answered before the batteries are
charged. Answering the phone before the batteries are fully
charged may prevent it from reaching its optimum capacity.
3
Insert the batteries
Insert the two batteries supplied, as indicated on
the markings inside the battery compartment and
slide the battery compartment shut. The handset
display will show
. This means one handset is
registered to the base. (If you have purchased the
BT Freelance XD 100 Twin the additional handset
will show -2-. See page 15.)
12
BT Freelance XD ~ 3rd Edition ~ 2nd August ’02 ~ 4832
Warning
Under no circumstances should NiCad or non-rechargeable
batteries be used. Only use the approved batteries. Using
unapproved batteries will invalidate your guarantee and
may damage the telephone.
Charge the handset batteries for at
least 16 hours
4
Before you use your BT Freelance XD 100 for the
first time it is important to have the handset
batteries fully charged. Place the handset on the
base. You will hear a long beep. The red charging
light on the base will come on and the battery and
charging icon
will be displayed. Leave the
handset to charge continuously for at least 16
hours to reach full charge.
The handset comes pre-registered but the
will flash to indicate that the handset is linking
up with the base. Once link up is successful the
icon will stop flashing and remain steady.
icon
IMPORTANT
The handset must always be placed on the base
face up. The base must be plugged into the
mains power socket at all times.
Once the handset is fully charged, the charging
icon
will be switched off.
The charging light will remain red even when the
batteries are fully charged.
13
BT Freelance XD ~ 3rd Edition ~ 2nd August ’02 ~ 4832
Battery levels
Battery low warning
If the handset battery symbol is empty, you will hear a
warning beep every 1 minute, you will need to recharge
your handset before you can use it. The handset will
only beep every minute when it is in use. In idle mode
the empty battery icon is displayed.
Out of range warning
When the handset is in use and you go out of range of
the base it will beep every 1 minute and the
will flash. Move closer to the base.
icon
Signal Strength
The BT Freelance XD 100 and BT Freelance XD 100
Twin have a range of up to 300 metres outdoors and up
to 50 metres indoors. This is in ideal conditions. The
range will be reduced when there is no clear line of
sight between the base and the handset. Thick stone
walls can severely affect the range.
Battery performance
Fully discharging the batteries at least once a week will
help them last as long as possible. However, the charge
capacity of rechargeable batteries will reduce with time
as they wear out, so reducing the talk/standby time of
the handset. Eventually they will need to be replaced.
New batteries can be obtained from the BT Freelance
XD 100 Helpline 08706 058 047.
Note: Under ideal conditions, the handset batteries should
give about 14 hours talktime or 350 hours standby on
a single charge. Optimum times for talk and standby
are only achieved when the handset batteries are
fully charged.
14
BT Freelance XD ~ 3rd Edition ~ 2nd August ’02 ~ 4832
The following instructions are only applicable if you
have purchased the BT Freelance XD 100 Twin. If you
purchased the BT Freelance XD 100 please skip to
instruction number 7.
Insert the batteries into the
BT Freelance XD 100 Twin
5
Insert the batteries into your BT Freelance XD
100 Twin handset as shown on page 12. The
handset display will show -2- as it is already
pre-registered as handset 2.
Connect and charge the
BT Freelance XD 100 Twin handset
6
Plug the power supply cable into the power socket
on your BT Freelance XD 100 charger (Item
number 003313).
15
BT Freelance XD ~ 3rd Edition ~ 2nd August ’02 ~ 4832
Plug the power supply adaptor into the wall socket.
Place the handset onto the charger. The red
charging light will come on and the charging icon
will be displayed while the batteries are charging.
Leave the handset to charge continuously for at
least 16 hours to reach full charge.
Once the handset is fully charged, the charging
icon
will be switched off. The charging light
will remain red even when the batteries are
fully charged.
Connect the telephone line cord to
the base
7
Plug the telephone line cord into the line socket
on your base.
16
BT Freelance XD ~ 3rd Edition ~ 2nd August ’02 ~ 4832
8
Connect the telephone line cord
Your BT Freelance XD 100/Freelance XD 100 Twin
is now ready for use.
Helpline
If you experience any difficulties installing or setting
up your BT Freelance XD 100, please contact the
BT Freelance XD 100 Helpline on 08706 058 047.
17
BT Freelance XD ~ 3rd Edition ~ 2nd August ’02 ~ 4832
Using the telephone
Making and receiving calls
To make an external call
Press the TALK button. You will hear the dial tone.
The
icon and EXT will be shown on the display
and the In use light on the base will flash.
Enter the telephone number you want.
OR
Preparatory dialling
Enter the telephone number first and then check
that it is correct on the display.
If you have made a mistake, press the DELETE
button to delete any incorrect digits.
Del
Secrecy
When you have entered the number correctly,
press the TALK button to dial the number
automatically.
18
BT Freelance XD ~ 3rd Edition ~ 2nd August ’02 ~ 4832
Note
The first digit of a telephone number you enter or receive
via Caller Display will not be shown on the display. For
example the first 0 of 020 8123 4567 will be displayed
as 20 8123 4567.
To end a call
Press the TALK button.
The
icon and EXT will disappear from the
display and the In use light will stop flashing.
To receive a call
When the phone rings the EXT icon on the display
will flash and the LED on the handset will also
flash. If you subscribe to a Caller Display service
the caller’s telephone number will also be
displayed.
Press the TALK button to answer the call.
Important
Your Freelance XD 100 features Auto-Talk. This means
when you receive a call, and the handset is on the base,
you can answer it simply by lifting the handset off the base
without pressing the TALK button.
19
BT Freelance XD ~ 3rd Edition ~ 2nd August ’02 ~ 4832
Secrecy
When on a call you can talk to someone in the same room
without your caller hearing.
To switch secrecy on/off
During a call:
Press the SECRECY button. The display will show
the icon. Your caller cannot hear you.
Del
Secrecy
Press the SECRECY button again to resume your
call.
Del
Secrecy
Last number redial
Your handset automatically saves the last number you
dialled. A redial number can be no longer than 20 digits.
To redial the last number dialled
Press the TALK button.
Press the REDIAL button. The last number you
Redial
dialled will be shown on the display and dialled
automatically.
P
20
BT Freelance XD ~ 3rd Edition ~ 2nd August ’02 ~ 4832
Paging
You can page your handset (s) from the base to alert a
handset user that they are wanted or to locate a missing
handset.
To page a handset
Page
Press the PAGE button on the base.
The handset(s) will ring for 30 seconds.
To stop the handset(s) ringing, press any button
on the handset.
Note
If you have purchased a BT Freelance XD 100 Twin you
will need to press any button on the additional handset to
stop that handset ringing.
21
BT Freelance XD ~ 3rd Edition ~ 2nd August ’02 ~ 4832
Quickdial memory
You can store up to 10 of your most frequently used
telephone numbers in the Quickdial memory. You can enter
numbers up to 20 digits.
Note
It is recommended you make a note of the numbers you
store in the Quickdial memory.
To store a number in the Quickdial
memory
Quickdial
Press the QUICKDIAL button. The display will
show the
icon.
Press the keypad number between 0 and 9 to
select the location number under which you want
to store the number.
Enter the telephone number you want to store.
(You will hear a warning beep if you enter more
than 20 digits)
If you enter any digits incorrectly you can press
the DELETE button to delete them.
Del
Secrecy
Quickdial
Press the QUICKDIAL button to confirm. You will
hear a confirmation tone and the display will
return to the idle mode.
Note
Press the R recall button at any time to cancel a storing
operation.
22
BT Freelance XD ~ 3rd Edition ~ 2nd August ’02 ~ 4832
To dial a number in the Quickdial
memory
Press the TALK button.
Quickdial
Press the QUICKDIAL button.
Enter the location number 0 to 9 under which the
number is stored.
The telephone number will be shown on the
display and dialled.
Note
If you hear a warning beep when trying to dial a number
in the quickdial memory it means there is no telephone
number stored under that location number.
To delete a number in the Quickdial
memory
Quickdial
Press the QUICKDIAL button.
Enter the location number 0 to 9 under which
the number you wish to delete is stored.
Quickdial
Press the QUICKDIAL button. The number is
now deleted.
(Alternatively, you can overwrite a number stored
with a new number under the same memory
location. Simply follow the To store a number in
the Quickdial memory on page 22).
23
BT Freelance XD ~ 3rd Edition ~ 2nd August ’02 ~ 4832
Caller Display
IMPORTANT
To use Caller Display you must first subscribe to the
service from your Network Provider. For more information
on BT’s Select Services call BT free on 0800 800 150.
Using Caller Display
If you have subscribed to your Network Provider's Caller
Display Service you will be able to see your caller's number
on your handset's display (provided it is not withheld)
before you answer the call.
When someone calls you the
handset display. New calls in the Calls list are indicated by
the icon flashing. The caller's telephone number will
icon will be shown on the
then be stored in the Calls list whether you answer the call
or not. If the telephone number is longer than 10 digits then
the last 10 digits will be displayed.
Up to 10 telephone numbers can be stored in the Calls list.
When the Calls list is full the oldest call will be replaced by
a new call.
Note
Caller Display information not available
With some incoming calls the telephone number of the
caller is not available and cannot therefore be displayed.
In this case, your BT Freelance XD 100 will show CALL
instead of the caller's telephone number. The word CALL
will not be stored in the calls list.
24
BT Freelance XD ~ 3rd Edition ~ 2nd August ’02 ~ 4832
To view the Calls list
ᮡ
ᮢ
Press the CALLS button to enter the Calls list.
The will be displayed.
The most recent caller's telephone number will be
displayed.
Use the DOWN button to scroll to the next
number in the list and use the UP button to
scroll back to the previous number.
ᮢ
ᮡ
Note
To exit the Calls list at any time press the
R
button.
To dial a number from the Calls list
When viewing a number in the Calls list, press the
TALK button. The number displayed will be
dialled automatically.
To delete a number from the Calls list
When viewing a number in the Calls list, press
the DELETE button. You will hear a confirmation
tone and the number displayed will be deleted.
Del
Secrecy
25
BT Freelance XD ~ 3rd Edition ~ 2nd August ’02 ~ 4832
Handset Settings
To adjust the earpiece volume
You can only adjust the earpiece volume during a
call. There are 3 earpiece volume levels to choose
from: HIGH, LOW and MEDIUM.
During a call:
Volume
Press the VOLUME button until you reach the
required volume level.
The volume will change from LOW, MEDIUM,
HIGH and then repeat the sequence again, LOW,
MEDIUM, HIGH.
To adjust the handset ringer volume
There are 3 ringer volume levels to choose from:
HIGH, LOW and MEDIUM.
Volume
Press the VOLUME button until you reach the
required volume.
The volume will change from HIGH, LOW,
MEDIUM and then repeat the sequence again,
HIGH, LOW, MEDIUM.
26
BT Freelance XD ~ 3rd Edition ~ 2nd August ’02 ~ 4832
Using the BT Freelance XD
100 Twin additional handset
The BT Freelance XD 100 is NOT GAP compatible,
therefore, it cannot be registered to any other DECT
telephones. However, if you have purchased the BT
Freelance XD 100 Twin you will have the BT Freelance XD
100 additional handset. Please note that this is the only
handset that can be used with the main BT Freelance XD
100 base. With the BT Freelance XD 100 Twin you can
make internal calls and transfer external calls between the
two BT Freelance XD 100 handsets.
The BT Freelance XD 100 additional handset comes
pre-registered to the main BT Freelance XD 100 base.
It is supplied with its own charger and must be charged
continuously for 16 hours before you can use it. Please see
Setting Up on page 15 if you have not already done this.
Internal calls
You can make internal calls between your BT Freelance XD
100 Twin handsets.
To make an internal call
Int
Press the INT button.
The other BT Freelance XD 100 handset will ring
and INT will be shown on the display to indicate
that the call is internal. To answer the call they
should press the TALK button.
To end the call, press the TALK button.
27
BT Freelance XD ~ 3rd Edition ~ 2nd August ’02 ~ 4832
Transferring calls
You can transfer an external call to the other BT Freelance
XD 100 Twin handset.
To transfer a call
During an external call:
Int
Press the INT button.
The other BT Freelance XD 100 handset will ring.
The other user should press the TALK button to
answer the call. You can now talk to each other.
To transfer the call, press the TALK button.
If you decide not to transfer the call you can
return to the caller by pressing the INT button.
Int
Int
If the other handset user does not even answer
the call you can return to the caller by pressing
the INT button.
If the other handset user does not answer the
call after 30 seconds you are automatically
re-connected to the caller.
28
BT Freelance XD ~ 3rd Edition ~ 2nd August ’02 ~ 4832
Help
No display appears
The batteries may be flat or dead.
Recharge or replace the batteries.
No dial tone
Is the telephone line cord plugged into the phone socket?
Check that the base is connected to the mains power and
switched on.
You cannot link up with the base
Is the display flashing
icon?
The mains power cable may not be connected at the base or
switched on.
Are you in range of the base?
Move closer to the base.
The batteries could be low or flat
Recharge or replace the batteries.
No ring on the handset
The ringer volume may be set too low for you. To adjust
the volume, see page 26.
Check that the base is plugged into the phone socket and
the mains power and that the mains power is switched on.
Buzzing noise on my radio, TV, computer or hearing aid
Sometimes your BT Freelance XD 100 can interfere with
other electrical equipment if it is placed too close.
It is recommended that you place your BT Freelance XD
100 at least one metre away from such appliances to avoid
any risk of interference.
29
BT Freelance XD ~ 3rd Edition ~ 2nd August ’02 ~ 4832
The BT Freelance XD 100 Twin charger does not appear to
be working
Check that:
The power adaptor is properly plugged into the charger.
Your handset has slotted correctly into the charger.
The batteries are correctly fitted into the handset.
The base is plugged into a working socket and the socket
is switched on.
Are you using the correct power adaptor?
BT Freelance XD 100 Twin charger adaptor is item number:
003313.
Caller’s number is not displayed even though you have
subscribed to a Caller Display Service.
The number has been withheld by the caller or is not
available. For example, it is an international call. CALL will
be displayed instead. This will not be stored in the calls list.
Helpline
If you are still experiencing difficulties, please call the
BT Freelance XD 100 Helpline on 08706 058 047.
Replacing the handset batteries
After a time, you may find that the handset batteries are
running out of charge more quickly. This is a standard sign
of wear and the batteries will need replacing.
For spare batteries please call the BT Freelance 100 XD
Helpline on 08706 058 047.
Note
BT accepts no responsibility for damage caused to your
BT Freelance XD 100 by using any other type of batteries
than those recommended on page 9.
30
BT Freelance XD ~ 3rd Edition ~ 2nd August ’02 ~ 4832
General information
Guarantee
Your BT Freelance XD 100 and Freelance XD 100 Twin is
guaranteed for a period of 12 months from the date of
purchase.
Subject to the terms listed below the guarantee will provide
for the repair of, or at BT’s or its agent’s discretion, the
option to replace the BT Freelance XD 100, or any
component thereof, (other than the batteries), which is
identified as faulty or below standard, or as a result of
inferior workmanship or materials. Products over 28 days
old from the date of purchase may be replaced with
a refurbished product.
The conditions of this guarantee are:
• The guarantee shall only apply to defects that occur
within the 12 month guarantee period.
• Proof of purchase is provided.
•
The equipment is returned to BT or its agent as instructed.
• This guarantee does not cover the batteries and any
faults or defects caused by accidents, misuse, fair wear
and tear, neglect, storm damage, tampering with the
equipment, or any attempt at adjustment or repair other
than through approved agents.
• This guarantee does not affect your statutory rights.
Within the 12 month guarantee period:
If you experience difficulty using the product, prior to
returning your product, please read the Help section
beginning on page 28, or contact the BT Freelance XD 100
Helpline for assistance:
Helpline 08706 058 047, 9am to 5.30pm Monday to Friday.
In the unlikely event of a defect occurring, please follow
the Helpline’s instructions for replacement or repair.
31
BT Freelance XD ~ 3rd Edition ~ 2nd August ’02 ~ 4832
Outside of the 12 month guarantee period:
If your product needs repair after the guarantee period has
ended, the repair must meet the approval requirements
for connection to the telephone network. We recommend
that you contact BT’s approved repair agent, TecLogic on
01672 564444 or a local qualified repairer.
Instructions for returning the product:
If the Helpline is unable to remedy your problem they will
ask you to return the product. Where possible, pack the
product in its original packaging. Please remember to
include all parts, including line cords, power supply units,
and the original batteries. (Please note that we cannot take
responsibility for goods damaged in transit.) Please obtain
and keep proof of posting from the Post Office.
Technical information
How many telephones can you have?
All items of telephone equipment have a Ringer Equivalence
Number (REN), which is used to calculate the number of
items which may be connected to any one telephone line.
Your BT Freelance XD 100 and Freelance XD 100 Twin has
a REN of 1. A total REN of 4 is allowed, if the total REN of 4
is exceeded, the telephones may not ring.
With different telephone types there is no guarantee of
ringing, even when the REN is less than 4.
Only use approved power supply, item number 872260 for
the BT Freelance XD 100 base. If you have purchased the
BT Freelance XD 100 Twin, for the charger use only item
number 003313.
Switchboard compatibility
This product is intended for use within the UK for
connection to the public telephone network and compatible
switchboards, which support tone dialling and timed break
32 recall. If in doubt please consult your service provider.
BT Freelance XD ~ 3rd Edition ~ 2nd August ’02 ~ 4832
Switchboard external line access code
You may need to enter an access code (e.g. 9) in order to
get an outside line. So that the switchboard has time to pick
up an outside line, you may also need to add a Pause after
the access code.
Setting pauses
To insert a pause in a stored number
With some switchboards, after dialling the access
code you may have to wait for a moment while the
switchboard picks up an outside line
Redial
If so, press the REDIAL/PAUSE button to insert
a pause before entering the telephone number.
P
If you need to insert a pause into a telephone
number you are storing in the memory, start
storing the number, (see page 22) and where the
pause is needed, press the REDIAL/PAUSE button.
Recall
To use the recall button
The RECALL button is of use when connected to
R
some switchboards, ie. to transfer calls or for
some BT Select Services or those services
available via your network provider. It is only
available when a call is in progress.
33
BT Freelance XD ~ 3rd Edition ~ 2nd August ’02 ~ 4832
Index
At a glance
1
Make a call
18
Batteries
Paging
21
33
16
11
18
charging
insert
low warning
performance
replacing
13
12
14
14
30
Pause
Phone socket
Power supply
Preparatory dialling
Caller Display
Calls
end
24
Quickdial memory
delete a number
dial a number
22
23
23
22
19
18
27
18
19
20
19
28
external
internal
make
receive
redial
store a number
Recall
33
19
20
32
Receive a call
Redial
secrecy
transfer
Returning product
Ringer
Calls list
handset
26
delete a number
dial a number
view
25
25
25
Safety information
Secrecy
9
20
11
32
Charge handset
13
Setting up
Delete
Switchboard compatibility
Calls list numbers
quickdial numbers
25
23
Switchboard external line
access code
33
Display icons
4
26
31
Technical information
Telephone line cord
Transfer a call
32
16-17
28
Earpiece volume
Guarantee
Help
29
8
Volume
earpiece
handset ringer
26
26
Helpline
Internal call
27
11
Location of product
34
BT Freelance XD ~ 3rd Edition ~ 2nd August ’02 ~ 4832
R&TTE
This product is intended for use within the UK for
connection to the public telephone network and compatible
switchboards.
This equipment complies with the essential requirements for
the Radio Equipment and Telecommunications Terminal
Equipment Directive 1999/5/EC.
Declaration of Conformance
Hereby, Suncorp Technologies, declares that this BT
Freelance XD is in compliance with the essential
requirements and other relevant provisions of Directive
1999/5/EC.
The Declaration of Conformance for the BT Freelance XD
BT Freelance XD ~ 3rd Edition ~ 2nd August ’02 ~ 4832
Offices worldwide
The telecommunications services described in this publication
are subject to availability and may be modified from time to time. Services
and equipment are provided subject to British Telecommunications plc’s
respective standard conditions of contract. Nothing in this publication forms
any part of any contract.
© British Telecommunications plc 2002.
Registered Office: 81 Newgate Street, London EC1A 7AJ.
Registered in England No. 1800000.
BT Freelance XD 100 Issue 1 (07/02) 3
Designed by The Art & Design Partnership Limited.
|