®
ELECTRONICS CORP.
LCM7N 7 Inch Navigation Monitor
with
Integrated Loudspeaker
AUDIO OX
Operation Manual
Monitor Setting
The color display is equipped with OSD prompting for the monitor settings. All settings must be changed
using the remote control.
Invoking the OSD:
1. Remove the remote control from the cradle.
2. Press the - and + buttons at the same time.
3. The OSD menu "Monitor Settings" is displayed.
4. In the OSD menu, you can adjust the following settings:
•
•
Volume:
Dimming:
Adjust volume level of the built-in monitor speaker.
Adjust day brightness when light outside.
Adjust night brightness when dark outside.
•
Display Mode: Select screen display mode. The selected setting is indicated in a yellow bar.
Possible selections include:
"Normal" (4:3)
"Full Screen" (16:9)
"Cinema"
"Wide 1"
"Wide 2"
•
Setup Menu: Select the following setup parameters:
-
Dim.Contr.: Auto/Auto off: Automatic brightness control On/Off. With
"Auto" selected, the display brightness is automatically adapted to
the ambient lighting.
-
Mount. Pos: high/Low: Adaptation of the display brightness to the
monitor mounting position high/low.
-
-
Speaker: On/Off: Controls the built-in loudspeaker On/Off.
Monitor: 1,2 or 3: Must be set for 1.
Adjusting Setting:
1. Press the - and + buttons at the same time.
2. Press the down arrow button ( ) to select the desired menu item.
3. Press the right arrow button (X) to adjust the selected menu item. Confirm by pressing the O.K.
button.
If you use the built-in monitor loudspeaker, set the volume level in the OSD menu to the middle
setting. Use the + and - buttons on the remote control to adjust the navigation audible messages.
-3-
MONITOR SPECIFICATIONS
1. Type:
7" TFT Active Matrix LCD, 16:9 Widescreen Format
2. Display Screen Size:
3. Resolution:
4.3 x 2.5 inches (109.2 x 63.5) (W x H)
400 (W) x 234 (H) Pixels
4. Monitor Characteristics: Anti-glare Coating, IR Sensor, CVBS (Composite Video Burst Signal),
Ambient Light Sensor, RGB interface
5. Remote Operation:
6. Power Source:
Adjustments Keyless via IR Remote Control
+12 VDC
7. Power Consumption:
8. Maximum Brightness:
0.9 A (Typical)
400 cd/qm, Automatic Display Brightness Control
9. Operating Temperature: -20°C – +65°C
10. Monitor Cabinet
Dimensions:
7.2 in x 4.7 in x 1.6 in (WxHxD)
(182 x 118 x 40 mm)
11. Weight:
508 g
12. Video Format:
13. Voltage Input:
PAL, NTSC (Autoswitch)
+12 Volts DC
-4-
For Customer Service
Visit Our Website At
WWW.audiovox.com
Product Information, Photos,
FAQ’s Owner’s Manuals
© Copyright 2005: Audiovox Electronics Corp. 150 Marcus Blvd. Hauppauge, NY 11788
128-7324
-5-
|