TM
3505 HUTCHINSON ROAD
CUMMING, GA 30040-5860, USA
ATLAS
INDUSTRIAL FLAT PANEL PC MONITOR
QUICK INSTALLATION GUIDE - ATM1900/ATM1900T
Description:
The Atlas ATM1900/ATM1900T is a high performance 19" color TFT
flat panel monitor specifically designed for harsh industrial
environments including Class I & II, Division 2 Hazardous Locations.
The ATM1900/ATM1900T accepts standard analog VGA input or
digital DVI input, and can display all VESA video modes up to 1280 x
1024 at 75 Hz with 16 million colors. An optional 5-wire analog touch
screen (ATM1900T) is available that offers both RS-232 and USB
interface capability. The monitor is housed in a heavy duty steel chassis
with a powder coated machined aluminum bezel. The monitor is
certified to NEMA 4/4X/12 standards, is UL/CUL listed, meets CE
requirements and is RoHS compliant. Panel mounting is simplified
using convenient mounting clips instead of conventional studs. All
monitors are shipped with a power input wiring receptacle, 6’ VGA
ATM1900/ATM1900T
cable, 6’ RS-232 cable (ATM1900T only), 2m USB Cable
(ATM1900T only), mounting hardware, this Quick Installation Guide,
and CD-ROM containing Hardware User’s Guide (ATM-19-USER)
and touch screen driver software for Windows 98/NT/2000/XP/Vista.
NOTE: SEE THE HARDWARE USER’S GUIDE, ATM-19-USER,
INCLUDED ON THE SUPPLIED DOCUMENTATION & DRIVER CD FOR
ADDITIONAL DETAILS. THE USER’S GUIDE IS IN PDF FILE FORMAT AND
REQUIRES DOWNLOADING ADOBE’S FREE ACROBAT READER TO OPEN
AND VIEW.
1. Verify Contents of the Box:
• AtlasFlat Panel Monitor – ATM1900 or ATM1900T (The “T” at the end of
the part number designates the touch screen option.)
• VGA video cable – 6’ length
Dimensions:
• RS-232 Serial touch screen cable (ATM1900T only) – 6’ length
• USB touch screen cable (ATM1900T only) – 2m length
• Mounting clips and screws (qty of 14)
• USB retention bracket and mounting screw (ATM1900T only)
• Documentation and Driver CD
Contents:
Packaging
Material
Atlas
Monitor
Mounting Clips
(qty. 14)
USB Cable
(“T” ver. only)
Agency Approvals:
RS-232 Cable
& hex spacers
(“T” ver. only)
Certifications & Standards
Name
UL508
UL1604
CE
EN 55022-1: Class A,
EN 61000-3-2: Class A,
EN 61000-3-3,
U
Documentation
& Driver CD
VGA Video
Cable
R
C
US
Atlas
Flat Panel Monitor
E191072
E313546
EN 61000-6-2,
IEC 60950-1
1
5. Connect Power to the Monitor
• Power source needs to be 100 - 240 VAC, 50/60 Hz, ͧ35 Watts.
• See connection diagram below.
Power Connections:
100 VAC - 240 VAC INPUT (1.0 Amps Min)
PIN No.
Definition
TOP VIEW
1
2
3
• Secure power connector screws to monitor.
• Power should not be applied until all cables are attached and the
monitor is ready to operate.
1
2
3
AC Line Input
AC Neutral Return
Protective Earth Ground
ADC P.N. ATM-AC-CON or
PHOENIX CONTACT P.N. 1777992
WARNING: Damage can occur if power is not properly connected.
Plug Retention Screws
6. Apply Power to the Monitor & PC
FRONT VIEW
Power
Connection
Label
L N
• Press the DISPLAY POWER button on the rear of the monitor to wake the
monitor up. Pressing the DISPLAY POWER button again turns off the
backlight inverter and puts the monitor in a reduced power state but
the touch screen remains active. It is important to note that this switch
does not disconnect power from the monitor. Power is always supplied
to the internal AC/DC power supply, which in turn continually supplies
power to the internal monitor electronics and the optional touch screen
controller.
PE
LCD Power Button:
7. Install the Appropriate Touch Screen Driver
• Applies to ATM1900T touch screen version only.
Power
Indicator
• Insert the Documentation and Driver CD into the host PC’s CD drive.
• If the CD does not start automatically with the window shown below
displayed, then go to Start > Run, browse to the CD’s “atlas.exe” file,
open it, and click OK.
Display Power
Button
DISPLAY POWER
• From the Atlas screen, the user can view the Hardware User’s Guide for
the monitor being used, and/or install the touch screen drivers for the
particular PC operating system being used. Before installing the drivers,
please read the Touch Screen Driver Documentation for operating
system details.
WARNING
Touch Screen is still
active while display
power is off
• Reboot the PC and restart the monitor to activate the driver.
WARNING: The monitor does not automatically select a video input
mode. The user must press the “UP (VGA/DVI)” button on the rear
of the monitor to select either VGA or DVI input. If a “No Video”
message appears on the screen, it is also suggested the user try using
the “UP (VGA/DVI)” button to select the active video input.
NOTE: ONCE YOU HAVE CONNECTED YOUR PC AND THE MONITOR,
SELECTED THE VIDEO SOURCE, AND POWERED BOTH UNITS, IT IS
SUGGESTED THAT THE “SELECT (AUTO ADJ)” BUTTON ON THE REAR
OF THE MONITOR BE PRESSED TO MAXIMIZE THE VIDEO SETTINGS.
OSD Settings Main Menu:
8. Verify Video and Touch Screen Functionality
• Verify the monitor’s video display by running a familiar program.
• If using the touch screen model (ATM1900T), use the touch screen to
navigate by running a familiar program.
M A I N M E N U
B R I G H T N E S S / C O N T R A S T
R G B
C O L O R
P O S I T I O N
S E T U P
E X I T
9. Adjust the Monitor OSD Settings as Required
• Press the Select (Auto Adj) control button on the rear of the panel to
initiate an automatic configuration of the screen.
1 2 8 0 X 1 0 2 4
6 3 . 9 K H Z / 6 0 H Z
Additional Help and Support
• Although normally not needed, the control buttons on the rear of panel
can be used to make other adjustments to the screen.
• Consult the Hardware User’s Guide, ATM-19-USER, on the supplied
Documentation and Drive CD for detailed usage of the OSD settings.
• For product support, specifications, installation, and
troubleshooting, a Hardware User’s Guide, ATM-19-
USER, is included on the supplied Documentation
and Driver CD, or downloadable from the Online
Documentation area of the AutomationDirect Web site.
• For additional technical support and questions, call our Technical
Support team 770-844-4200.
10. Installation Complete
3
Accessories & Replacement Parts:
Part Number
Description
10 ft. 15-pin coaxial VGA cable. Connects any Atlas monitor to a standard VGA card.
25 ft. 15-pin coaxial VGA cable. Connects any Atlas monitor to a standard VGA card.
50 ft. 15-pin coaxial VGA cable. Connects any Atlas monitor to a standard VGA card.
ATM-CBL-VGA10
ATM-CBL-VGA25
ATM-CBL-VGA50
6 ft. (2 meter) DVI (type D) video cable. Connects M1700 and M1900 to a standard DVI-D port. DVI
cables provide a higher bandwidth video interface than the VGA cables.
ATM-CBL-DV2M
ATM-CBL-DV3M
ATM-CBL-10
ATM-CBL-50
USB-CBL-AB6
10 ft. (3 meter) DVI (type D) video cable. Connects M1700 and M1900 to a standard DVI-D port.
DVI cables provide a higher bandwidth video interface than the VGA cables.
10 ft. serial communication cable. Connects Atlas monitor to std. 9-pin RS-232 port.
25 ft. serial communication cable. Connects Atlas monitor to std. 9-pin RS-232 port.
50 ft. serial communication cable. Connects Atlas monitor to std. 9-pin RS-232 port.
ATM-CBL-10
ATM-CBL-25
ATM-CBL-50
USB-CBL-AB3
USB-CBL-AB6
USB-CBL-AB10
USB-CBL-AB15
ATM-AC-CON
ATM-CLIP
ATM-CBL-25
3-ft (0.9 meter) Standard USB 2.0 cable with Standard-A plug to Standard-B plug. Suitable for all
USB devices.
6-ft (1.8 meter) Standard USB 2.0 cable with Standard-A plug to Standard-B plug. Suitable for all
USB devices.
10-ft (3 meter) Standard USB 2.0 cable with Standard-A plug to Standard-B plug. Suitable for all
USB devices.
15-ft (4.6 meter) Standard USB 2.0 cable with Standard-A plug to Standard-B plug. Suitable for all
USB devices.
Replacement Power Wiring Connector for AC Powered Units.
Replacement flat panel mounting clip kit. Package of 16 clips and screws.
USB-CBL-AB3
ATM-CBL-VGA10
USB-CBL-AB10
ATM-CBL-VGA25
USB-CBL-AB15
ATM-CBL-VGA50
ATM-AC-CON
ATM-CBL-DV2M
ATM-CLIP
Quick Installation Guide: ATM-19-QIG, Rev. B
ATM-CBL-DV3M
Copyright 2007, Automationdirect.com Incorporated/All Rights Reserved Worldwide
4
|