Asus Vs197t P 18 5 VS197TP User Manual

June 2011  
VS197/VS198 Series  
LED Monitor  
User Guide  
Notices  
Federal Communications Commission Statement  
This device complies with Part 15 of the FCC Rules. Operation is subject  
to the following two conditions:  
This device may not cause harmful interference, and  
This device must accept any interference received including  
interference that may cause undesired operation.  
This equipment has been tested and found to comply with the limits for a  
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits  
are designed to provide reasonable protection against harmful interference  
in a residential installation. This equipment generates, uses and can  
radiate radio frequency energy and, if not installed and used in accordance  
with manufacturer’s instructions, may cause harmful interference to radio  
communications. However, there is no guarantee that interference will  
not occur in a particular installation. If this equipment does cause harmful  
interference to radio or television reception, which can be determined by  
turning the equipment off and on, the user is encouraged to try to correct  
the interference by one or more of the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment to an outlet on a circuit different from that to  
which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
As an Energy Star® Partner, our company has determined  
that this product meets the Energy Star® guidelines for  
energy efficiency.  
Canadian Department of Communications Statement  
This digital apparatus does not exceed the Class B limits for radio  
noise emissions from digital apparatus set out in the Radio Interference  
Regulations of the Canadian Department of Communications.  
This class B digital apparatus complies with Canadian ICES-003.  
iii  
Safety information  
Before setting up the monitor, carefully read all the documentation that  
came with the package.  
To prevent fire or shock hazard, never expose the monitor to rain or  
moisture.  
Never try to open the monitor cabinet. The dangerous high voltages  
inside the monitor may result in serious physical injury.  
If the power supply is broken, do not try to fix it by yourself. Contact a  
qualified service technician or your retailer.  
Before using the product, make sure all cables are correctly connected  
and the power cables are not damaged. If you detect any damage,  
contact your dealer immediately.  
Slots and openings on the back or top of the cabinet are provided for  
ventilation. Do not block these slots. Never place this product near or  
over a radiator or heat source unless proper ventilation is provided.  
The monitor should be operated only from the type of power source  
indicated on the label. If you are not sure of the type of power supply to  
your home, consult your dealer or local power company.  
Use the appropriate power plug which complies with your local power  
standard.  
Do not overload power strips and extention cords. Overloading can  
result in fire or electric shock.  
Avoid dust, humidity, and temperature extremes. Do not place the  
monitor in any area where it may become wet. Place the monitor on a  
stable surface.  
Unplug the unit during a lightning storm or if it will not be used for a  
long period of time. This will protect the monitor from damage due to  
power surges.  
Never push objects or spill liquid of any kind into the slots on the  
monitor cabinet.  
To ensure satisfactory operation, use the monitor only with UL listed  
computers which have appropriate configured receptacles marked  
between 100-240V AC.  
If you encounter technical problems with the monitor, contact a  
qualified service technician or your retailer.  
iv  
Care & Cleaning  
Before you lift or reposition your monitor, it is better to disconnect the  
cables and power cord. Follow the correct lifting techniques when  
positioning the monitor. When lifting or carrying the monitor, grasp the  
edges of the monitor. Do not lift the display by the stand or the cord.  
Cleaning. Turn your monitor off and unplug the power cord. Clean the  
monitor surface with a lint-free, non-abrasive cloth. Stubborn stains  
may be removed with a cloth dampened with mild cleaner.  
Avoid using a cleaner containing alcohol or acetone. Use a cleaner  
intended for use with the LCD. Never spray cleaner directly on the  
screen, as it may drip inside the monitor and cause an electric shock.  
The following symptoms are normal with the monitor:  
The screen may flicker during the initial use due to the nature of the  
fluorescent light. Turn off the Power Switch and turn it on again to  
make sure that the flicker disappears.  
You may find slightly uneven brightness on the screen depending on  
the desktop pattern you use.  
When the same image is displayed for hours, an afterimage of the  
previous screen may remain after switching the image. The screen will  
recover slowly or you can turn off the Power Switch for hours.  
When the screen becomes black or flashes, or cannot work anymore,  
contact your dealer or service center to fix it. Do not repair the screen  
by yourself!  
Conventions used in this guide  
WARNING: Information to prevent injury to yourself when trying  
to complete a task.  
CAUTION: Information to prevent damage to the components  
when trying to complete a task.  
IMPORTANT: Information that you MUST follow to complete a  
task.  
NOTE: Tips and additional information to aid in completing a task.  
v
Where to find more information  
Refer to the following sources for additional information and for product  
and software updates.  
1. ASUS websites  
The ASUS websites worldwide provide updated information on ASUS  
hardware and software products. Refer to http://www.asus.com  
2. Optional documentation  
Your product package may include optional documentation that may  
have been added by your dealer. These documents are not part of  
the standard package.  
vi  
1.1  
Welcome!  
Thank you for purchasing the ASUS® VS197/VS198 Series LED monitor!  
The latest widescreen LED monitor from ASUS provides a crisper,  
broader, and brighter display, plus a host of features that enhance your  
viewing experience.  
With these features, you can enjoy the convenience and delightful visual  
experience that the VS197/VS198 Series brings you!  
1.2  
Package contents  
Check your VS197/VS198 Series LED package for the following items:  
LED monitor  
Monitor base  
Quick start guide  
1 x Power cord  
1 x VGA cable  
1 x DVI cable (Available for model VS197N, VS198N only)  
1 x Warranty card  
If any of the above items is damaged or missing, contact your retailer  
immediately.  
ASUS LED Monitor VS197, VS198  
1-1  
1.3  
Assembling the monitor base  
To assemble the monitor base:  
1. Connect the base with the arm of monitor and turn clockwise. A click  
indicates that the base has been connected successfully.  
2. Adjust the monitor to the angle that is most comfortable for you.  
We recommend that you cover the table surface with soft cloth to  
prevent damage to the monitor.  
2
1
1.4  
Connecting cables  
To connect cables:  
Connect the cables you need based on chapter 1.5.2, page1-5.  
Chapter 1: Product Introduction  
1-2  
1.5  
Monitor introduction  
1.5.1  
Front of the LED monitor  
1
4
5
2
3
1.  
Button:  
Automatically adjust the image to its optimized position, clock,  
and phase by long pressing this button for 2-4 seconds (for VGA  
mode only).  
Use this hotkey to switch among six video preset modes  
(Scenery, Standard, Theater, Game, Night View, and sRGB  
Mode) with SPLENDID™ Video Enhancement Technology.  
Exit the OSD menu or go back to the previous menu as the OSD  
menu is active.  
2.  
Button:  
Press this button to decrease the value of the function selected  
or move to the next fuction.  
This is also a hotkey for contrast adjustment.  
ASUS LED Monitor VS197, VS198  
1-3  
3. MENU Button:  
Press this button to enter the OSD menu.  
Press this button to enter/select the icon (function) highlighted  
while the OSD is activated.  
4.  
Button:  
Press this button to increase the value of the function selected  
or move right/up to the next function.  
This is also a hotkey for brightness adjustment.  
5.  
Power Button/Power Indicator:  
Press this button to turn the monitor on/off.  
The color definition of the power indicator is as the table below.  
Status  
Blue  
Description  
ON  
Amber  
OFF  
Standby mode  
OFF  
Chapter 1: Product Introduction  
1-4  
1.5.2  
Rear of the LED monitor  
Screw holes for VESA  
Wall Mount  
1
2
3
1. AC-In  
2. DVI-In  
(Available for model VS197N, VS198N)  
3. VGA-In  
ASUS LED Monitor VS197, VS198  
1-5  
2.1  
Detaching the arm/stand  
(for VESA wall mount)  
The detachable stand of the VS197/VS198 Series LED monitor is specially  
designed for VESA wall mount.  
To detach the arm/stand:  
1. Pull the stop lever and turn anticlockwise to unlock.  
2. Detach the base from the monitor.  
3. Use your fingers gently pull away the plate that covers the stand  
neck. Use a screwdriver to remove the four screws that secure the  
stand to the monitor.  
4. Detach the stand from the monitor.  
We recommend that you cover the table surface with soft cloth to  
prevent damage to the monitor.  
Hold the stand of the monitor while removing the screws.  
2
1
3
5
4
The VESA wall mount kit ( 75 x 75 mm) is purchased separately.  
Use only the UL Listed Wall Mount Bracket with minimum weight/  
load according to the model listed in the specification table (Screw  
size: M4 x 10 mm).  
Chapter 2: Setup  
2-1  
2.2  
Adjusting the monitor  
For optimal viewing, we recommend that you look at the full face of the  
monitor, then adjust the monitor to the angle that is most comfortable  
for you.  
Hold the stand to prevent the monitor from falling while changing its  
angle.  
You can adjust the monitor’s angle from -5˚ to 20˚.  
-5 ~ 20  
ASUS LED Monitor VS197, VS198  
2-2  
3.1  
OSD (On-Screen Display) menu  
3.1.1  
How to reconfigure  
VS197  
Splendid  
Color  
Scenery Mode  
Standard Mode  
Theater Mode  
Game Mode  
Image  
Input Select  
System Setup  
Night View Mode  
sRGB  
Move  
Menu  
Exit  
1. Press the [MENU] button to activate the OSD menu.  
2. Press and to navigate through the functions. Highlight and  
activate the desired function by pressing the [MENU] button. If the  
function selected has a sub-menu, press and again to navigate  
through the sub-menu functions. Highlight and activate the desired  
sub-menu function by pressing the [MENU] button.  
3. Press and to change the settings of the selected function.  
4. To exit the OSD menu, press the  
to adjust any other function.  
button. Repeat step 2 and step 3  
3.1.2  
OSD Function Introduction  
1. Splendid  
This function contains six sub-functions that you can select for your  
preference. Each mode has the Reset selection, allowing you to  
maintain your setting or return to the preset mode.  
VS197  
Splendid  
Color  
Scenery Mode  
Standard Mode  
Theater Mode  
Game Mode  
Image  
Input Select  
System Setup  
Night View Mode  
sRGB  
Move  
Menu  
Exit  
Scenery Mode: This is the best choice for scenery photo  
displaying with SPLENDID™ Video Enhancement.  
Chapter 3: General Instruction  
3-1  
Standard Mode: This is the best choice for document editing  
with SPLENDID™ Video Enhancement.  
Theater Mode: This is the best choice for movie watching with  
SPLENDID™ Video Enhancement.  
Game Mode: This is the best choice for game playing with  
SPLENDID™ Video Enhancement.  
Night View Mode: This is the best choice for playing dark-  
scene game or watching movie with SPLENDID™ Video  
Enhancement.  
sRGB: This is the best choice for viewing photos and graphics  
from PCs.  
In the Standard Mode, the Saturation, Skin Tone, Sharpness, and  
ASCR functions are not user-configurable.  
In the sRGB, the Brightness, Contrast, Saturation, Color  
Temp., Skin Tone, Sharpness, and ASCR functions are not user-  
configurable.  
2. Color  
Select the image color you like from this function.  
VS197  
Splendid  
Color  
Brightness  
Contrast  
90  
80  
Image  
Saturation  
Color Temp.  
50  
Input Select  
System Setup  
User Mode  
Skin Tone  
Natural  
OFF  
Smart View  
Move  
Menu  
Exit  
Brightness: The adjusting range is from 0 to 100. The  
is also a hotkey to activate this function.  
button  
Contrast: The adjusting range is from 0 to 100. The  
button is  
also a hotkey to activate this function.  
Saturation: The adjusting range is from 0 to 100.  
Color Temp.: Contain three preset color modes (Cool, Normal,  
Warm) and one User Mode.  
Skin Tone: Contain three color modes including Reddish,  
Natural, and Yellowish.  
Smart View: Enable a clearer visibility after tilted the screen.  
In the User Mode, colors of R (Red), G (Green), and B (Blue) are  
userconfigurable; the adjusting range is from 0 ~ 100.  
ASUS LED Monitor VS197, VS198  
3-2  
3. Image  
You can adjust the image Sharpness, Aspect Control, Position (VGA  
only), and Focus (VGA only) from this main function.  
VS197  
Splendid  
Color  
Sharpness  
Aspect Control  
ASCR  
40  
Full  
OFF  
Image  
Input Select  
System Setup  
Position  
Focus  
Move  
Menu  
Exit  
Sharpness: Asjust the picture sharpness. The adjusting range  
is from 0 to 100. (Only available for selecting “Standard Mode” in  
Splendid menu.)  
Aspect Control: Adjust the aspect ratio to “Full”, “4:3”.  
ASCR: Select ON or OFF to enable or disable dynamic contrast  
ratio function. (ASCR: ASUS Smart Contrast Ratio. Disabled at  
“Standard Mode”.)  
Position: Adjust the horizontal postition (H-Position) and the  
vertical position (V-Position) of the image. The adjusting range is  
from 0 to 100. (Only available for VGA input.)  
Focus: Reduce Horizonal-line noise and Vertical-line noise of  
the image by adjusting (Phase) and (Clock) separately. The  
adjusting range is from 0 to 100. (Only available for VGA input.)  
4. Input Select  
Select the input source from VGA, DVI.  
VS197  
Splendid  
Color  
VGA  
DVI  
Image  
Input Select  
System Setup  
Move  
Menu  
Exit  
DVI: Available for model VS197N, VS198N only.  
Chapter 3: General Instruction  
3-3  
5. System Setup  
Adjust the system configuration.  
VS197  
Splendid  
Color  
Splendid Demo Mode  
OFF  
OFF  
ECO Mode  
OSD Setup  
Language  
Information  
Image  
Input Select  
System Setup  
English  
All Reset  
Move  
Menu  
Exit  
Splendid Demo Mode: Activate the demo mode for the  
Splendid function.  
ECO Mode: Activate the ecology mode for power saving. (Some  
gray levels may not be distinguished if ECO is ON. Its brightness  
is lower than that when setting the Contrast Ratio to 100.)  
OSD Setup: Adjust the horizontal postition (H-Position), vertical  
position (V-Position), OSD Timeout, DDD/CI, and Transparency  
of the OSD screen.  
Language: Select OSD language. The selections are English,  
French, German, Spanish, Italian, Dutch, Russian, Traditional  
Chinese, Simplified Chinese, and Japanese.  
Information: Display the monitor information of Input Port,  
Resolution, H-freq., V-freq, and Model Name.  
All Reset: Set to “Yes” to revert all settings to the factory default  
status.  
ASUS LED Monitor VS197, VS198  
3-4  
3.2  
Specifications  
VS197N/D  
Model  
Panel Size  
VS198N/D  
19”W (48.26 cm)  
1440 x 900  
18.5”W(46.99 cm)  
Max. Resolution  
Brightness (Typ.)  
Intrisinc Contrast Ratio (Typ.)  
Viewing Angle (CR=10)  
Display Colors  
1366 x 768  
250cd/m2  
1000:1  
170°(H) / 160°(V)  
16.7 M  
Response Time  
5ms  
VS197D: No  
VS198D: No  
VS198N: Yes  
Yes  
DVI input  
VS197N: Yes  
D-Sub input  
Power ON Consumption  
Power Saving Mode  
Power OFF Mode  
Tilt  
Compliant with Energy Star 5.0  
< 0.5W  
< 0.5W  
-5° ~ +20°  
VESA Wall Mounting  
Phys. Dimension (WxHxD)  
Box Dimension (WxHxD)  
Net Weight (Esti.)  
Gross Weight (Esti.)  
Voltage Rating  
Yes (75mm x 75mm)  
447.1 x 345.7 x 184.9 mm 446.1 x 368.4 x 184.9 mm  
495 x 421 x 114 mm  
2.75 kg  
494 x 460 x 114 mm  
2.7 kg  
4.05 kg  
4.0 kg  
AC 100~240V(Built-in)  
*Specifications subject to change without notice.  
Chapter 3: General Instruction  
3-5  
3.3  
Troubleshooting (FAQ)  
Problem  
Possible Solution  
button to check if the monitor is in the  
Power LED is not ON  
Press the  
ON mode.  
Check if the power cord is properly connected to the  
monitor and the power outlet.  
The power LED lights amber and  
there is no screen image  
Check if the monitor and the computer are in the  
ON mode.  
Make sure the signal cable is properly connected  
the monitor and the computer.  
Inspect the signal cable and make sure none of the  
pins are bent.  
Connect the computer with another available  
monitor to check if the computer is properly working.  
Screen image is too light or dark  
Adjust the Contrast and Brightness settings via  
OSD.  
Screen image is not centered or  
sized properly  
Press the  
button for two seconds to  
automatically adjust the image.  
Adjust the H-Position or V-Position settings via  
OSD.  
Screen image bounces or a wave  
pattern is present in the image  
Make sure the signal cable is properly connected to  
the monitor and the computer.  
Move electrical devices that may cause electrical  
interference.  
Screen image has color defects  
(white does not look white)  
Inspect the signal cable and make sure that none of  
the pins are bent.  
Perform Reset via OSD.  
Adjust the R/G/B color settings or select the Color  
Temperature via OSD.  
Screen image is blurry or fuzzy  
Press the  
button for two seconds to  
automatically adjust the image (for VGA mode only).  
Adjust the Phase and Clock settings via OSD.  
ASUS LED Monitor VS197, VS198  
3-6  
3.4  
Supported Timing List  
VESA / IBM Modes Support Timing (D-SUB, DVI-D inputs)  
VS197  
Resolution  
640 x 350  
640 x 480  
640 x 480  
640 x 480  
640 x 480  
720 x 400  
800 x 600  
800 x 600  
800 x 600  
800 x 600  
832 x 624  
1024 x 768  
1024 x 768  
1024 x 768  
1366 x 768  
Refresh Rate  
70Hz  
Horizontal Frequency  
31.469KHz  
31.469KHz  
35KHz  
60Hz  
67Hz  
72Hz  
75Hz  
70Hz  
56Hz  
60Hz  
72Hz  
75Hz  
75Hz  
60Hz  
70Hz  
75Hz  
60Hz  
37.861KHz  
31.469KHz  
31.469KHz  
35.156KHz  
37.879KHz  
48.077KHz  
46.875KHz  
49.725KHz  
48.363KHz  
56.476KHz  
60.023KHz  
47.712KHz  
VS198  
Resolution  
640 x 350  
640 x 480  
640 x 480  
640 x 480  
640 x 480  
720 x 400  
800 x 600  
800 x 600  
800 x 600  
800 x 600  
832 x 624  
1024 x 768  
1024 x 768  
1024 x 768  
1152 x 864  
1280 x 960  
1280 x 1024  
1280 x 1024  
1440 x 900  
1440 x 900  
Refresh Rate  
70Hz  
60Hz  
67Hz  
72Hz  
75Hz  
70Hz  
56Hz  
60Hz  
72Hz  
75Hz  
75Hz  
60Hz  
70Hz  
75Hz  
75Hz  
60Hz  
60Hz  
75Hz  
60Hz  
75Hz  
Horizontal Frequency  
31.469KHz  
31.469KHz  
35KHz  
37.861KHz  
37.5KHz  
31.469KHz  
35.156KHz  
37.879KHz  
48.077KHz  
46.875KHz  
49.725KHz  
48.363KHz  
56.476KHz  
60.023KHz  
67.5KHz  
60KHz  
63.981KHz  
79.976KHz  
55.935KHz  
70.635KHz  
* The modes not listed in the above tables may not be supported. For optimal resolution, we  
recommend that you choose a mode listed in the above tables.  
Chapter 3: General Instruction  
3-7  

Hanns G HU151A User Manual
Gigabyte Technology Computer Hardware GA 8ILFT User Manual
GEA Nu Con Cooktop JGP656 User Manual
DFI VS436 15 User Manual
Black Decker Distinction TRO4075BDC User Manual
Black Box Computer Hardware JPM820A User Manual
BenQ Benq 27 Gaming Monitor XL2720T User Manual
AT T E1814B User Manual
AT T 1030 User Manual
Arcam DV139 User Manual