P8H61-M2/TPM/SI R2.0
E7361_P8H61-M2-TPM-SI R2.0_Manua1
1
5/16/12 1:43:39 PM
Contents
Safety information ...................................................................................... vi
About this guide ......................................................................................... vi
P8H61-M2/TPM/SI R2.0 specifications summary................................... viii
Chapter 1:
Product introduction
1.1
1.2
1.3
Welcome! ...................................................................................... 1-1
Package contents......................................................................... 1-1
Special features............................................................................ 1-1
1.3.1
1.3.2
Product highlights ........................................................... 1-1
Innovative ASUS features............................................... 1-3
1.4
1.5
Before you proceed ..................................................................... 1-5
Motherboard overview................................................................. 1-6
1.5.1
1.5.2
1.5.3
1.5.4
Placement direction ........................................................ 1-6
Screw holes .................................................................... 1-6
Motherboard layout......................................................... 1-7
Layout contents............................................................... 1-7
1.6
1.7
Central Processing Unit (CPU) ................................................... 1-8
1.6.1
1.6.2
1.6.3
Installing the CPU ........................................................... 1-8
Installing the CPU heatsink and fan...............................1-11
Uninstalling the CPU heatsink and fan ......................... 1-12
System memory ......................................................................... 1-13
1.7.1
1.7.2
1.7.3
1.7.4
Overview....................................................................... 1-13
Memory configurations.................................................. 1-14
Installing a DIMM .......................................................... 1-18
Removing a DIMM ........................................................ 1-18
1.8
Expansion slots.......................................................................... 1-19
1.8.1
1.8.2
1.8.3
1.8.4
1.8.5
Installing an expansion card ......................................... 1-19
Configuring an expansion card ..................................... 1-19
PCI slots........................................................................ 1-19
PCI Express x1 slot....................................................... 1-19
PCI Express x16 slot..................................................... 1-19
1.9
Jumpers ...................................................................................... 1-20
Connectors ................................................................................. 1-21
1.10.1 Rear panel ports ........................................................... 1-21
1.10.2 Internal connectors ....................................................... 1-22
1.10
iii
E7361_P8H61-M2-TPM-SI R2.0_Manua3
3
5/16/12 1:43:40 PM
Contents
1.11
Software support........................................................................ 1-28
1.11.1 Installing an operating system ...................................... 1-28
1.11.2 Support DVD information.............................................. 1-28
Chapter 2:
BIOS information
2.1
Managing and updating your BIOS ............................................ 2-1
2.1.1
2.1.2
2.1.3
2.1.4
ASUS Update utility ........................................................ 2-1
ASUS EZ Flash 2............................................................ 2-2
ASUS CrashFree BIOS 3 utility ...................................... 2-3
ASUS BIOS Updater....................................................... 2-4
2.2
2.3
BIOS setup program .................................................................... 2-6
Main menu .................................................................................. 2-10
2.3.1
2.3.2
2.3.3
2.3.4
System Language [English] .......................................... 2-10
System Date [Day xx/xx/xxxx]....................................... 2-10
System Time [xx:xx:xx] ................................................. 2-10
Security......................................................................... 2-10
2.4
Ai Tweaker menu........................................................................ 2-12
2.4.1
2.4.2
2.4.3
2.4.4
2.4.5
ASUS MultiCore Enhancement [Enabled] .................... 2-12
Memory Frequency [Auto]............................................. 2-12
GPU Boost.................................................................... 2-12
DRAM Timing Control ................................................... 2-13
CPU Power Management ............................................. 2-13
2.5
Advanced menu ......................................................................... 2-14
2.5.1
2.5.2
2.5.3
2.5.4
2.5.5
2.5.6
2.5.7
2.5.8
2.5.9
Trusted Computing........................................................ 2-14
CPU Configuration........................................................ 2-14
PCH Configuration........................................................ 2-16
SATA Configuration....................................................... 2-17
System Agent Configuration ......................................... 2-17
USB Configuration ........................................................ 2-18
Onboard Devices Configuration.................................... 2-18
APM .............................................................................. 2-19
Network Stack............................................................... 2-20
2.6
Monitor menu ............................................................................. 2-21
2.6.1
2.6.2
CPU Temperature / MB Temperature [xxxºC/xxxºF]...... 2-21
CPU / Chassis Fan Speed............................................ 2-21
iv
E7361_P8H61-M2-TPM-SI R2.0_Manua4
4
5/16/12 1:43:40 PM
Contents
2.6.3
CPU Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage .. 2-21
CPU Q-Fan Control [Enabled] ...................................... 2-22
Chassis Q-Fan Control [Enabled] ................................. 2-22
Anti Surge Support [Enabled] ....................................... 2-23
2.6.4
2.6.5
2.6.6
2.7
Boot menu .................................................................................. 2-24
2.7.1
2.7.2
2.7.3
2.7.4
2.7.5
2.7.6
2.7.7
2.7.8
2.7.9
Bootup NumLock State [On] ......................................... 2-24
Full Screen Logo [Enabled]........................................... 2-24
Wait for ‘F1’ If Error [Enabled]....................................... 2-24
Option ROM Messages [Force BIOS]........................... 2-25
Setup Mode [EZ Mode]................................................. 2-25
UEFI/Legacy Boot [Enabled both UEFI and Legacy].... 2-25
PCI ROM Priority [Legacy ROM] .................................. 2-25
Boot Option Priorities.................................................... 2-25
Boot Override................................................................ 2-25
2.8
2.9
Tools menu ................................................................................. 2-26
2.8.1
2.8.2
2.8.3
ASUS EZ Flash 2 Utility................................................ 2-26
ASUS SPD Information................................................. 2-26
ASUS O.C. Profile......................................................... 2-26
Exit menu.................................................................................... 2-27
Appendices
Notices.......................................................................................................A-1
v
E7361_P8H61-M2-TPM-SI R2.0_Manua5
5
5/16/12 1:43:41 PM
Safety information
Electrical safety
•
To prevent electric shock hazard, disconnect the power cable from the electric outlet
before relocating the system.
•
When adding or removing devices to or from the system, ensure that the power cables
for the devices are unplugged before the signal cables are connected. If possible,
disconnect all power cables from the existing system before you add a device.
•
•
•
Before connecting or removing signal cables from the motherboard, ensure that all
power cables are unplugged.
Seek professional assistance before using an adapter or extension cord. These devices
could interrupt the grounding circuit.
Ensure that your power supply is set to the correct voltage in your area. If you are not
sure about the voltage of the electrical outlet you are using, contact your local power
company.
•
If the power supply is broken, do not try to fix it by yourself. Contact a qualified service
technician or your retailer.
Operation safety
•
•
•
•
Before installing the motherboard and adding devices on it, carefully read all the manuals
that came with the package.
Before using the product, ensure that all cables are correctly connected and the power
cables are not damaged. If you detect any damage, contact your dealer immediately.
To avoid short circuits, keep paper clips, screws, and staples away from connectors,
slots, sockets and circuitry.
Avoid dust, humidity, and temperature extremes. Do not place the product in any area
where it may become wet.
•
•
Place the product on a stable surface.
If you encounter technical problems with the product, contact a qualified service
technician or your retailer.
About this guide
This user guide contains the information you need when installing and configuring the
motherboard.
How this guide is organized
This guide contains the following parts:
•
Chapter 1: Product introduction
This chapter describes the features of the motherboard and the new technology it
supports.
•
Chapter 2: BIOS information
This chapter tells how to change system settings through the BIOS Setup menus.
Detailed descriptions of the BIOS parameters are also provided.
vi
E7361_P8H61-M2-TPM-SI R2.0_Manua6
6
5/16/12 1:43:41 PM
Conventions used in this guide
To ensure that you perform certain tasks properly, take note of the following symbols used
throughout this manual.
DANGER/WARNING: Information to prevent injury to yourself when trying to
complete a task.
CAUTION: Information to prevent damage to the components when trying to
complete a task.
IMPORTANT: Instructions that you MUST follow to complete a task.
NOTE: Tips and additional information to help you complete a task.
Where to find more information
Refer to the following sources for additional information and for product and software
updates.
1.
ASUS websites
The ASUS website provides updated information on ASUS hardware and software
products. Refer to the ASUS contact information.
2.
Optional documentation
Your product package may include optional documentation, such as warranty flyers,
that may have been added by your dealer. These documents are not part of the
standard package.
Typography
Bold text
Italics
Indicates a menu or an item to select.
Used to emphasize a word or a phrase.
<Key>
Keys enclosed in the less-than and greater-than sign means
that you must press the enclosed key.
Example: <Enter> means that you must press the Enter or
Return key.
<Key1>+<Key2>+<Key3>
If you must press two or more keys simultaneously, the key
names are linked with a plus sign (+).
Example: <Ctrl>+<Alt>+<D>
vii
E7361_P8H61-M2-TPM-SI R2.0_Manua7
7
5/16/12 1:43:43 PM
P8H61-M2/TPM/SI R2.0 specifications summary
CPU
LGA1155 socket for Intel® 3rd/2nd Generation Core™ i7 / i5 / i3 /
Pentium® / Celeron® processors
Supports 22/32nm CPU
Supports Intel® Turbo Boost Technology 2.0
*
The Intel® Turbo Boost Technology 2.0 support depends on the
CPU types.
Intel® H61 Express Chipset
Chipset
Memory
4 x DIMMs, max. 32GB, DDR3 2200 (O.C.) / 2000 (O.C.) / 1800
(O.C.) / 1600 (O.C.) / 1333 / 1066 MHz, non-ECC, un-buffered
memory
Dual-channel memory architecture
Supports Intel® Extreme Memory Profile (XMP)
*
DDR3 1600 MHz and higher memory frequency is supported
by Intel® 3rd generation processors.
** Hyper DIMM support is subject to the physical characteristics
of individual CPUs. Some hyper DIMMs only support one
DIMM per channel. Refer to Memory QVL for details.
***Refer to www.asus.com for the Memory QVL (Qualified
Vendors Lists).
**** When you install a total memory of 4GB capacity or more,
Windows® 32-bit operating system may only recognize less
than 3GB. We recommend a maximum of 3GB system
memory if you are using a Windows® 32-bit operating system.
Expansion slots
Graphics
1 x PCI Express 3.0*/2.0 x16 slot
1 x PCI Express 2.0 x1 slot
2 x PCI slots
*
PCIe 3.0 speed is supported by Intel® 3rd generation Core™
processors.
Integrated Intel® HD Graphics
-
-
-
Supports single link DVI with max. resolution up to 1920 x
1200 @60Hz
Supports D-Sub with max. resolution up to 2048 x 1536
@75Hz
Supports DirectX 10.1
Storage
Intel® H61 Express Chipset:
-
-
4 x Serial ATA 3.0 Gb/s ports (blue)
Supports Intel® Smart Response Technology*
*
Supports on Intel® CoreTM processor family with Windows®
operating systems.
7
LAN
Realtek® 8111F Gigabit LAN controller
VIA® VT1708S 8-channel* Audio CODEC
Audio
-
-
S/PDIF out header
Supports Jack-Dection, Multi-streaming, Front Panel Jack-
Retasking (HD only)
*
Use a chassis with HD audio module in the front panel to
support an 8-channel audio output.
(continued on the next page)
viii
E7361_P8H61-M2-TPM-SI R2.0_Manua8
8
5/16/12 1:43:43 PM
P8H61-M2/TPM/SI R2.0 specifications summary
USB
10 x USB 2.0/1.1 ports (4 ports at mid-board, 6 ports at the back
panel)
ASUS Special
features
ASUS Anti-Surge protection
ASUS Network iControl* featuring instant network bandwidth
domination for top network program in use
ASUS EPU (Lite)
GPU Boost
ASUS Fan Xpert
ASUS CrashFree BIOS 3
ASUS EZ Flash 2
ASUS MyLogo 2
*
The Network iControl feature does not support Windows®
XP/Vista operating systems.
Internal connectors
2 x USB 2.0/1.1 connectors support additional 4 USB 2.0/1.1
ports
1 x System panel connector
1 x S/PDIF Out connector
4 x SATA 3.0 Gb/s connectors
1 x Front panel audio connector
1 x CPU fan connector
1 x Chassis fan connector
1 x COM connector
1 x LPT connector
1 x TPM IC onboard
1 x Speaker header
1 x 24-pin EATX Power connector
1 x 4-pin ATX 12V Power connector
Rear panel ports
1 x PS/2 keyboard/mouse combo port
1 x LAN (RJ-45) port
1 x D-Sub port
1 x DVI port
6 x USB 2.0/1.1 ports
3 x Audio jacks
BIOS features
Accessories
64 Mb Flash ROM, UEFI BIOS, PnP, DMI v2.0, WfM2.0, SMBIOS
v2.5, ACPI v2 0a, Multi-language BIOS
2 x Serial ATA 3.0 Gb/s cables
1 x I/O shield
1 x User Manual
1 x Support DVD
Support DVD
Drivers
ASUS Update
ASUS Utilities
Anti-virus software (OEM version)
Form factor
uATX form factor: 9.6 in x 8.8 in (24.4 cm x 22.4 cm)
* Specifications are subject to change without notice.
ix
E7361_P8H61-M2-TPM-SI R2.0_Manua9
9
5/16/12 1:43:44 PM
x
E7361_P8H61-M2-TPM-SI R2.0_Manua10 10
5/16/12 1:43:44 PM
Chapter 1
Product introduction
1.1
Welcome!
Thank you for buying an ASUS® P8H61-M2/TPM/SI R2.0 motherboard!
The motherboard delivers a host of new features and latest technologies, making it another
standout in the long line of ASUS quality motherboards!
Before you start installing the motherboard, and hardware devices on it, check the items in
your package with the list below.
1.2
Package contents
Check your motherboard package for the following items.
Motherboard
Cables
ASUS P8H61-M2/TPM/SI R2.0 motherboard
2 x Serial ATA 3.0Gb/s cables
1 x I/O shield
Accessories
Application DVD
Documentation
ASUS motherboard support DVD
User Manual
If any of the items is damaged or missing, contact your retailer.
1.3
Special features
1.3.1
Product highlights
LGA1155 socket for Intel® 3rd/2nd Generation Core™ i7 /
Core™ i5 / Core™ i3 / Pentium® / Celeron® Processors
This motherboard supports the Intel® 3rd/2nd generation Core™ i7/i5/
i3/Pentium®/Celeron® processors in the LGA1155 package, with iGPU,
memory, and PCI Express controllers integrated to support onboard
graphics out with dedicated chipsets, 2-channel (4 DIMMs) DDR3
memory, and 16 PCI Express 3.0/2.0 lanes. This provides great graphics
performance. Intel® 3rd/2nd generation Core™ i7/i5/i3/Pentium®/Celeron®
processors are among the most powerful and energy efficient CPUs in
the world.
Chapter 1: Product introduction
1-1
E7361_P8H61-M2-TPM-SI R2.0_Manua1
1
5/16/12 1:43:46 PM
Intel® H61 Express Chipset
The Intel® H61 Express Chipset is the latest single-chipset design to
support the new 1155 socket Intel® 3rd/2nd Generation Core™ i7 /
Core™ i5 / Core™ i3 / Pentium® / Celeron® processors. It provides
improved performance by utilizing serial point-to-point links, which allows
increased bandwidth and stability.
Dual-Channel DDR3 2200 (O.C.) / 2000 (O.C.) / 1800 (O.C.) /
1600 (O.C.) / 1333 / 1066MHz support
The motherboard supports DDR3 memory that features data transfer
rates of 2200 (O.C.) / 2000 (O.C.) / 1800 (O.C.) / 1600 (O.C.) / 1333/
1066 MHz to meet the higher bandwidth requirements of the latest 3D
graphics, multimedia, and Internet applications. The dual-channel DDR3
architecture enlarges the bandwidth of your system memory to boost
system performance.
PCI Express® 3.0
PCI Express® 3.0 (PCIe 3.0) is the latest PCI Express bus standard with
improved encoding schemes that provide twice the performance of the
current PCIe 2.0. The total bandwidth for a x16 link reaches a maximum
of 32Gb/s, double the 16 Gb/s of PCIe 2.0 (in x16 mode). As such, PCIe
3.0 provides users an unprecendented data speeds, combined with the
convenience and seamless transition offerred by complete backward
compatibility with PCIe 1.0 and PCIe 2.0 devices. PCIe 3.0 will become
a must-have feature for users who wish to improve and optimize graphic
performance, as well as have the latest technology available to them.
* PCI 3.0 speed is supported by Intel® 3rd generation Core™ processors.
Gigabit LAN solution
The onboard LAN controller is a highly integrated Gb LAN controller. It is
enhanced with an ACPI management function to provide efficient power
management for advanced operating systems.
Intel® Smart Response Technology
SSD Speed with HDD Capacity
Intel® Smart Response Technology boosts overall system performance.
It uses an installed fast SSD (min 18.6GB available capacity required) as
a cache for frequently accessed data. Key benefits include reduced load
and wait times, and lower power consumption through the elimination
of unnecessary hard drive spin. This technology combines SSD
performance with hard drive capacity, operating up to 4X faster than a
hard drive-only system, and an important part of Green ASUS eco-
friendly computing.
* Intel® Smart Response Technology is supported by 3rd / 2nd generation Intel®
Core™ processor family on Windows® 7™ operating systems.
** Operating systems must be installed on the HDD to launch Intel® Smart
Response Technology. The capacity of the SSD is reserved for caching
function.
1-2
ASUS P8H61-M2/TPM/SI R2.0
E7361_P8H61-M2-TPM-SI R2.0_Manua2
2
5/16/12 1:43:51 PM
1.3.2
Innovative ASUS features
Network iControl
With a one-click on/off button, the software currently in use is set
as top priority over all other network programs, dominating the
network bandwidth with ease. Moreover, you can prioritize your
favorite software easily by configuring profiles through the intutive
user interface. Within the profile, programs can be pre-scheduled
to run in a specific time period to avoid network clogging and
long-waits on downloads. Auto PPPoE network connection gives
a one-step setup and an intuitive network bandwidth control
center.
The Network iControl feature does not support Windows® XP/Vista operating systems.
ASUS UEFI BIOS
Flexible and Easy BIOS Interface
ASUS UEFI BIOS offers the first mouse-controlled graphical BIOS
designed with selectable modes, providing a user-friendly interface
that goes beyond the traditional keyboard-only controls. It also natively
supports fully-utilized hard drives larger than 2.2TB in 64-bit operating
systems.
ASUS exclusive interface
EZ Mode displays frequently-accessed info. Users can choose system
performance settings, and drag and drop boot priorities. Advanced Mode
for performance enthusiasts includes detailed DRAM settings via a
dedicated memory info page for complete insight.
New upgrade! Quick and easy information for enhanced system
control
- F12 BIOS snapshot hotkey for sharing UEFI information and
troubleshooting
- New F3 Shortcut for most accessed information
- ASUS DRAM SPD (Serial Presence Detect) information for accessing
memory information, detecting faulty DIMMs, and helping with difficult
POST situations.
AI Suite II
With its fast user-friendly interface, ASUS AI Suite II consolidates all the
exclusive ASUS features into one simple to use software package. It
allows you to supervise overclocking, energy management, fan speed
control, and voltage and sensor readings. This all-in-one software offers
diverse and ease to use functions, with no need to switch back and forth
between different utilities.
ASUS Anti-Surge Protection
This special design prevents expensive devices and the motherboard
from damage caused by power surges from switching power supply
(PSU).
Chapter 1: Product introduction
1-3
E7361_P8H61-M2-TPM-SI R2.0_Manua3
3
5/16/12 1:43:52 PM
GPU Boost
GPU Boost overclocks the integrated GPU in real time for the best
graphics performance. User-friendly UI facilitates flexible frequency and
voltage adjustments. Its ability to deliver multiple overclocking profiles
also provides rapid and stable system-level upgrades.
EPU
Energy Efficiency All Around
Tap into the world’s first real-time PC power saving chip through the AI
Suite II utility. Get total system-wide energy optimization by automatically
detecting current PC loadings and intelligently moderating power
consumption. This also reduces fan noise and extends component
longevity.
ASUS Fan Xpert
ASUS Fan Xpert intelligently allows you to adjust the CPU fan and
chassis fan speeds according to different ambient temperatures caused
by different climate conditions in different geographic regions and your
PC’s loading. The built-in variety of useful profiles offer flexible controls of
fan speed to achieve a quiet and cool environment.
ASUS MyLogo2™
This feature allows you to convert your favorite photo into a 256-color
boot logo for a more colorful and vivid image on your screen.
ASUS CrashFree BIOS 3
ASUS CrashFree BIOS 3 is an auto-recovery tool that allows you to
restore a corrupted BIOS file using the bundled support DVD or USB
flash disk that contains the latest BIOS file.
ASUS EZ Flash 2
ASUS EZ Flash 2 is a utility that allows you to update the BIOS without
using an OS-based utility.
C.P.R. (CPU Parameter Recall)
The BIOS C.P.R. feature automatically restores the CPU default settings
when the system hangs due to overclocking failure. C.P.R. eliminates the
need to open the system chassis and clear the RTC data. Simply shut
down and reboot the system, and the BIOS automatically restores the
CPU parameters to their default settings.
ErP ready
The motherboard is European Union´s Energy-related Products (ErP)
ready, and ErP requires products to meet certain energy efficiency
requirements in regards to energy consumptions. This is in line with
ASUS vision of creating environment-friendly and energy-efficient
products through product design and innovation to reduce carbon
footprint of the product and thus mitigate environmental impacts.
1-4
ASUS P8H61-M2/TPM/SI R2.0
E7361_P8H61-M2-TPM-SI R2.0_Manua4
4
5/16/12 1:43:54 PM
1.4
Before you proceed
Take note of the following precautions before you install motherboard components or change
any motherboard settings.
•
•
Unplug the power cord from the wall socket before touching any component.
Before handling components, use a grounded wrist strap or touch a safely grounded
object or a metal object, such as the power supply case, to avoid damaging them due to
static electricity.
•
•
Hold components by the edges to avoid touching the ICs on them.
Whenever you uninstall any component, place it on a grounded antistatic pad or in the
bag that came with the component.
•
Before you install or remove any component, ensure that the ATX power supply is
switched off or the power cord is detached from the power supply. Failure to do so may
cause severe damage to the motherboard, peripherals, or components.
Standby Power LED
The motherboard comes with a standby power LED that lights up to indicate that the system
is ON, in sleep mode, or in soft-off mode. This is a reminder that you should shut down
the system and unplug the power cable before removing or plugging in any motherboard
component. The illustration below shows the location of the onboard LED.
SB_PWR
P8H61-M2/TPM/SI R2.0
ON
OFF
Standby Power Powered Off
P8H61-M2/TPM/SI R2.0 Onboard LED
Chapter 1: Product introduction
1-5
E7361_P8H61-M2-TPM-SI R2.0_Manua5
5
5/16/12 1:43:55 PM
1.5
Motherboard overview
Before you install the motherboard, study the configuration of your chassis to ensure that the
motherboard fits into it.
Ensure that you unplug the power cord before installing or removing the motherboard.
Failure to do so can cause you physical injury and damage motherboard components.
1.5.1
Placement direction
When installing the motherboard, ensure that you place it into the chassis in the correct
orientation. The edge with external ports goes to the rear part of the chassis as indicated in
the image below.
1.5.2
Screw holes
Place six screws into the holes indicated by circles to secure the motherboard to the chassis.
Do not overtighten the screws! Doing so can damage the motherboard.
Place this side towards
the rear of the chassis
P8H61-M2/TPM/SI R2.0
1-6
ASUS P8H61-M2/TPM/SI R2.0
E7361_P8H61-M2-TPM-SI R2.0_Manua6
6
5/16/12 1:43:57 PM
1.5.3
Motherboard layout
1
2
3
2
4
5
22.4cm(8.8in)
CPU_FAN
KB_USB56
COM1
EPU
Super
I/O
ATX12V
ASM 1443
6
LPT
USB3_E12
CHA_FAN
LAN_USB12
AUDIO
Lithium Cell
CMOS Power
1
PCIEX16
64Mb
BIOS
RTL
8111F
P8H61-M2/TPM/SI R2.0
PCI1
Intel®
H61
PCI2
ASM
1083
SATA3G_3 SATA3G_1
SATA3G_4 SATA3G_2
SPDIF_OUT
PCIEX1_1
SB_PWR
VIA
VT1708S
F_PANEL
CLRTC SPEAKER
USB910
USB78
AAFP
14
13
12
11 10
9
8
7
1.5.4
Layout contents
Connectors/Jumpers/Slots/LED
Page Connectors/Jumpers/Slots/LED
Page
1. ATX power connectors (24-pin EATXPWR,
4-pin ATX12V)
1-22 8. System panel connector (10-1 pin F_PANEL)
1-24
2. CPU and Chassis fan connectors (4-pin
CPU_FAN, 3-pin CHA_FAN)
1-23 9. Speaker connector (4-pin SPEAKER)
1-26
3. Intel® LGA1155 CPU socket
4. DDR3 DIMM slots
1-8
10. Clear RTC RAM (3-pin CLRTC)
1-20
1-5
1-13 11. Standby power LED (SB_PWR)
5. Serial port connector (10-1 pin COM1)
6. LPT connector (26-1 pin LPT)
1-23 12. USB connectors (10-1 pin USB78, USB910)
1-24 13. Front panel audio connector (10-1 pin AAFP)
1-25 14. Digital audio connector (4-1 pin SPDIF_OUT)
1-26
1-25
1-27
7. Serial ATA connectors (7-pin SATA3G_1-4)
Chapter 1: Product introduction
1-7
E7361_P8H61-M2-TPM-SI R2.0_Manua7
7
5/16/12 1:43:57 PM
1.6
Central Processing Unit (CPU)
The motherboard comes with a surface mount LGA1155 socket designed for the Intel®
3rd/2nd Generation Core™ i7/ i5/ i3/ Pentium® / Celeron® processors.
Unplug all power cables before installing the CPU.
•
Upon purchase of the motherboard, ensure that the PnP cap is on the socket and the
socket contacts are not bent. Contact your retailer immediately if the PnP cap is missing,
or if you see any damage to the PnP cap/socket contacts/motherboard components.
ASUS will shoulder the cost of repair only if the damage is shipment/transit-related.
•
•
Keep the cap after installing the motherboard. ASUS will process Return Merchandise
Authorization (RMA) requests only if the motherboard comes with the cap on the
LGA1155 socket.
The product warranty does not cover damage to the socket contacts resulting from
incorrect CPU installation/removal, or misplacement/loss/incorrect removal of the PnP
cap.
1.6.1
Installing the CPU
To install a CPU:
1. Locate the CPU socket on the motherboard.
P8H61-M2/TPM/SI R2.0
P8H61-M2/TPM/SI R2.0 CPU socket LGA1155
2.
Press the load lever with your thumb (A),
and then move it to the right (B) until it is
released from the retention tab.
Load lever
A
To prevent damage to the socket pins,
do not remove the PnP cap unless
you are installing a CPU.
B
Retention tab
1-8
ASUS P8H61-M2/TPM/SI R2.0
E7361_P8H61-M2-TPM-SI R2.0_Manua8
8
5/16/12 1:43:59 PM
3.
4.
5.
Lift the load lever in the direction of the
arrow until the load plate is completely
lifted.
Load plate
Remove the PnP cap from the CPU
socket by lifting the tab only.
PnP cap
Position the CPU over the socket,
ensuring that the gold triangle is on the
bottom-left corner of the socket, and
then fit the socket alignment keys into
the CPU notches.
CPU notches
The CPU fits in only one correct
orientation. DO NOT force the CPU
into the socket to prevent bending
the connectors on the socket and
damaging the CPU!
Gold
triangle
mark
Alignment keys
Chapter 1: Product introduction
1-9
E7361_P8H61-M2-TPM-SI R2.0_Manua9
9
5/16/12 1:44:00 PM
6.
Apply some Thermal Interface Material
to the exposed area of the CPU that the
heatsink will be in contact with, ensuring
that it is spread in an even thin layer.
Some heatsinks come with pre-
applied thermal paste. If so, skip this
step.
The Thermal Interface Material is
toxic and inedible. DO NOT eat it. If
it gets into your eyes or touches your
skin, wash it off immediately, and seek
professional medical help.
7.
Close the load plate (A), and then push
down the load lever (B), ensuring that
the front edge of the load plate slides
under the retention knob (C).
B
A
C
8.
Insert the load lever under the retention
tab.
1-10
ASUS P8H61-M2/TPM/SI R2.0
E7361_P8H61-M2-TPM-SI R2.0_Manua10 10
5/16/12 1:44:01 PM
1.6.2
Installing the CPU heatsink and fan
The Intel® LGA1155 processor requires a specially designed heatsink and fan assembly to
ensure optimum thermal condition and performance.
•
When you buy a boxed Intel® processor, the package includes the CPU fan and
heatsink assembly. If you buy a CPU separately, ensure that you use only Intel®-certified
multi-directional heatsink and fan.
•
•
Your Intel® LGA1155 heatsink and fan assembly comes in a push-pin design and
requires no tool to install.
Use an LGA1155-compatible CPU heatsink and fan assembly only. The LGA1155 socket
is incompatible with the LGA775 and LGA1366 sockets in size and dimension.
If you purchased a separate CPU heatsink and fan assembly, ensure that you have
properly applied Thermal Interface Material to the CPU heatsink or CPU before you install
the heatsink and fan assembly.
Ensure that you have installed the motherboard to the chassis before you install the CPU
fan and heatsink assembly.
To install the CPU heatsink and fan:
A
1.
Place the heatsink on top of the installed
CPU, ensuring that the four fasteners match
the holes on the motherboard.
B
B
A
Orient the heatsink and fan assembly
such that the CPU fan cable is closest to
the CPU fan connector.
2.
Push down two fasteners at a time in a
diagonal sequence to secure the heatsink
and fan assembly in place.
1
1
A
B
B
A
The type of CPU heatsink and fan assembly may differ, but the installation steps and
functions should remain the same. The illustration above is for reference only.
Chapter 1: Product introduction
1-11
E7361_P8H61-M2-TPM-SI R2.0_Manua11 11
5/16/12 1:44:03 PM
3.
Connect the CPU fan cable to the connector on the motherboard labeled CPU_FAN.
CPU_FAN
P8H61-M2/TPM/SI R2.0
P8H61-M2/TPM/SI R2.0 CPU fan connector
Do not forget to connect the CPU fan connector! Hardware monitoring errors can occur if
you fail to plug this connector.
1.6.3
Uninstalling the CPU heatsink and fan
To uninstall the CPU heatsink and fan:
1.
2.
3.
Disconnect the CPU fan cable from the connector on the motherboard.
Rotate each fastener counterclockwise.
Pull up two fasteners at a time in a diagonal sequence to disengage the heatsink and
fan assembly from the motherboard.
A
A
B
B
A
B
B
A
1-12
ASUS P8H61-M2/TPM/SI R2.0
E7361_P8H61-M2-TPM-SI R2.0_Manua12 12
5/16/12 1:44:05 PM
4.
5.
Carefully remove the heatsink and fan
assembly from the motherboard.
Rotate each fastener clockwise to ensure
correct orientation when reinstalling.
1.7
System memory
1.7.1
Overview
This motherboard comes with four Double Data Rate 3 (DDR3) Dual Inline Memory Modules
(DIMM) sockets. A DDR3 module has the same physical dimensions as a DDR2 DIMM but
is notched differently to prevent installation on a DDR2 DIMM socket. DDR3 modules are
developed for better performance with less power consumption. The figure illustrates the
location of the DDR3 DIMM sockets:
Channel
Sockets
Channel A
Channel B
DIMM_A1 and DIMM_A2
DIMM_B1 and DIMM_B2
P8H61-M2/TPM/SI R2.0
P8H61-M2/TPM/SI R2.0 240-pin DDR3 DIMM sockets
Chapter 1: Product introduction
1-13
E7361_P8H61-M2-TPM-SI R2.0_Manua13 13
5/16/12 1:44:08 PM
1.7.2
Memory configurations
You may install 1GB, 2GB, 4GB, and 8GB unbuffered non-ECC DDR3 DIMMs into the DIMM
sockets.
•
•
•
You may install varying memory sizes in Channel A and Channel B. The system maps
the total size of the lower-sized channel for the dual-channel configuration. Any excess
memory from the higher-sized channel is then mapped for single-channel operation.
Always install DIMMs with the same CAS latency. For optimal compatibility, we
recommend that you install memory modules of the same version or date code (D/C)
from the same vendor. Check with the retailer to get the correct memory modules.
Memory module with memory frequency higher than 2133 MHz and its corresponding
timing or the loaded XMP Profile is not the JEDEC memory standard. The stability and
compatibility of these memory modules depend on the CPU's capabilities and other
installed devices.
•
Due to the memory address limitation on 32-bit Windows® OS, when you install 4GB
or more memory on the motherboard, the actual usable memory for the OS can be
about 3GB or less. For effective use of memory, we recommend that you do any of the
following:
- Use a maximum of 3GB system memory if you are using a 32-bit Windows® OS.
- Install a 64-bit Windows® OS when you want to install 4GB or more on the
motherboard.
•
•
This motherboard does not support DIMMs made up of 512Mb (64MB) chips or less..
The default memory operation frequency is dependent on its Serial Presence Detect
(SPD), which is the standard way of accessing information from a memory module.
Under the default state, some memory modules for overclocking may operate at a
lower frequency than the vendor-marked value. To operate at the vendor-marked or at a
higher frequency, refer to section 2.4 Ai Tweaker menu for manual memory frequency
adjustment.
•
For system stability, use a more efficient memory cooling system to support a full
memory load (4 DIMMs) or overclocking condition.
P8H61-M2/TPM/SI R2.0 Motherboard Qualified Vendors Lists (QVL)
DDR3-2400 (O.C.) MHz capability
DIMM socket support (Optional)
SS/ Chip Chip
DS Brand NO.
Vendors
Part No.
Size
Timing
Voltage
1 DIMM
2 DIMMs 4 DIMMs
Corsair
G.SKILL
G.SKILL
GEIL
CMGTX8(XMP)
8GB (2GB x 4) SS
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
10-12-10-27 1.65V
11-11-11-31 1.65V
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
F3-19200CL11Q-16GBZHD(XMP1.3) 16GB(4GB x 4) DS
F3-19200CL9D-4GBPIS(XMP)
GET34GB2400C9DC(XMP)
FLLE88F-C8KKAA HAIS(XMP)
4GB(2 x 2GB) DS
9-11-9-28
9-11-9-27
1.65V
1.65V
2GB
2GB
DS
SS
Kingmax
10-11-10-30 1.8V
•
•
•
Transcend TX2400KLU-4GK(427652)(XMP)
Transcend TX2400KLU-4GK (381850)(XMP)
Transcend TX2400KLU-4GK(374243)(XMP)
PATRIOT PVV34G2400C9K(XMP)
4GB(2 x 2GB) SS
4GB(2 x 2GB) SS
4GB(2 x 2GB) DS
4GB(2 x 2GB) DS
-
1.65V
1.65V
1.65V
1.65V
9
9
9-11-9-27
•
DDR3 1600 MHz and higher memory frequency is supported by Intel® 3rd generation
processors.
•
Due to Intel® 2nd generation processors’ behavior, DDR3 2250 MHz and higher memory
frequencies runs at DDR3 2200 MHz as default. In addition, DDR3 2133 MHz runs at
2000 MHz and DDR3 1866 MHz runs at 1800 MHz as default.
1-14
ASUS P8H61-M2/TPM/SI R2.0
E7361_P8H61-M2-TPM-SI R2.0_Manua14 14
5/16/12 1:44:09 PM
DDR3-2250 (O.C.) MHz capability
DIMM socket support (Optional)
Chip
Brand
Vendors
Part No.
Size
SS/DS
Chip NO. Timing Voltage
1 DIMM
2 DIMMs 4 DIMMs
Kingston
KHX2250C9D3T1K2/4GX(XMP) 4GB(2 x 2GB) DS
-
-
-
1.65V
•
•
DDR3-2200 (O.C.) MHz capability
DIMM socket support (Optional)
Chip
Brand
Vendors
Part No.
Size
SS/DS
Chip NO. Timing
Voltage
1 DIMM
2 DIMMs 4 DIMMs
GEIL
GET34GB2200C9DC(XMP)
GET38GB2200C9ADC(XMP)
2GB
4GB
DS
DS
DS
-
-
-
-
-
-
-
-
-
-
9-10-9-28 1.65V
9-11-9-28 1.65V
•
•
•
•
•
•
•
•
•
•
GEIL
Kingmax
Kingmax
Kingmax
FLKE85F-B8KJAA-FEIS(XMP) 2GB
-
-
-
-
FLKE85F-B8KHA EEIH(XMP)
FLKE85F-B8KJA FEIH(XMP)
4GB(2 x 2GB) DS
4GB(2 x 2GB) DS
1.5V-1.7V
1.5V-1.7V
DDR3-2133 (O.C.) MHz capability
DIMM socket support (Optional)
SS/ Chip Chip
DS Brand NO.
Vendors
Part No.
Size
Timing
Voltage
1 DIMM
2 DIMMs 4 DIMMs
Corsair
Corsair
Corsair
Corsair
G.SKILL
GEIL
CMT16GX3M4X2133C9(XMP 1.3) 16GB ( 4GB x4 ) DS
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
9-11-10-27 1.50V
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
CMT4GX3M2A2133C9(XMP)
CMT4GX3M2B2133C9(XMP)
CMT8GX3M2B2133C9(XMP)
4GB(2x 2GB)
4GB(2x 2GB)
DS
DS
9-10-9-24
9-10-9-27
9-11-9-27
1.65V
1.50V
1.50V
8GB ( 4GB x 2) DS
F3-17000CL9Q-16GBZH(XMP1.3) 16GB ( 4GB x4 ) DS
9-11-10-28 1.65V
GE34GB2133C9DC(XMP)
GU34GB2133C9DC(XMP)
2GB
DS
DS
9-9-9-28
9-9-9-28
-
1.65V
1.65V
1.65V
1.65V
1.65V
1.65V
GEIL
4GB(2 x 2GB)
Kingston
Kingston
Kingston
Kingston
PATRIOT
KHX2133C9AD3T1K2/4GX(XMP) 4GB ( 2x 2GB ) DS
KHX2133C9AD3X2K2/4GX(XMP) 4GB(2 x 2GB)
KHX2133C9AD3T1K4/8GX(XMP) 8GB(4 x 2GB)
KHX2133C9AD3T1FK4/8GX(XMP) 8GB(4x 2GB)
DS
DS
DS
9-11-9-27
9-11-9-27
-
PGD38G2133C11K(XMP)
16GB ( 4GB x4 ) DS
11-11-11-30 1.65V
DDR3-2000 (O.C.) MHz capability
DIMM socket support
(Optional)
SS/ Chip
DS Brand
Vendors
Part No.
Size
Chip NO.
Timing
Voltage
1 DIMM 2 DIMMs 4 DIMMs
Apacer
78.AAGD5.9KD(XMP)
6GB(3 x 2GB) DS
4GB(2 x 2GB) SS
6GB(3 x 2GB) DS
4GB(2 x 2GB) DS
4GB(2 x 2GB) DS
6GB(3 x 2GB) DS
4GB(2 x 2GB) DS
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
9-9-9-27
1.65V
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Corsair
CMZ4GX3M2A2000C10(XMP)
CMT6GX3M3A2000C8(XMP)
F3-16000CL9D-4GBFLS(XMP)
F3-16000CL9D-4GBTD(XMP)
F3-16000CL6T-6GBPIS(XMP)
GUP34GB2000C9DC(XMP)
10-10-10-27 1.50V
•
Corsair
8-9-8-24
1.65V
1.65V
1.65V
1.65V
1.65V
1.65V
1.65V
1.65V
1.65V
1.65V
1.6V
G.SKILL
G.SKILL
G.SKILL
GEIL
9-9-9-24
9-9-9-27
6-9-6-24
9-9-9-28
Kingston
Kingston
Kingston
Kingston
Kingston
KHX2000C9AD3T1K2/4GX(XMP) 4GB(2 x 2GB) DS
KHX2000C9AD3W1K2/4GX(XMP) 4GB(2 x 2GB) DS
KHX2000C9AD3T1K2/4GX(XMP) 4GB(2 x 2GB) DS
KHX2000C9AD3W1K3/6GX(XMP) 6GB(3 x 2GB) DS
KHX2000C9AD3T1K3/6GX(XMP) 6GB(3 x 2GB) DS
-
-
9
-
-
Transcend TX2000KLN-8GK(XMP)
8GB(2 x 4GB) DS
-
H5TQ2G83BFR
H9C
Asint SLA302G08-ML2HB(XMP)
4GB
DS HYNIX
-
-
•
•
DDR3-1866 (O.C.) MHz capability
DIMM socket support
(Optional)
Chip Chip
Brand NO.
Vendors
Part No.
Size
SS/DS
Timing
9-9-9-24
Voltage
1 DIMM 2 DIMMs 4 DIMMs
Corsair
Corsair
CMT4GX3M2A1866C9(XMP)
CMT6GX3MA1866C9(XMP)
4GB(2 x 2GB)
6GB(3 x 2GB)
8GB(2 x 4GB)
DS
DS
DS
-
-
-
-
1.65V
1.65V
•
•
9-9-9-24
•
•
Corsair
CMZ8GX3M2A1866C9(XMP)
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
9-10-9-27
9-10-9-28
1.50V
1.5V
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
G.SKILL
G.SKILL
G.SKILL
G.SKILL
Kingston
Kingston
Kingston
F3-14900CL9Q-16GBZL(XMP1.3)
16GB(4GB x 4) DS
F3-14900CL10Q2-64GBZLD(XMP1.3) 64GB(8GB x 8) DS
10-11-10-30 1.5V
F3-14900CL9D-8GBXL(XMP)
F3-14900CL9Q-8GBXL(XMP)
KHX1866C9D3T1K3/3GX(XMP)
KHX1866C9D3K4/16GX(XMP)
KHX1866C9D3T1K3/6GX(XMP)
8GB(2 x 4GB)
8GB(2GB x 4)
3GB(3 x 1GB)
DS
DS
SS
9-10-9-28
1.5V
9-9-9-24
1.6V
-
-
-
1.65V
1.65V
1.65V
•
16GB(4GB x 4) DS
6GB(3 x 2GB) DS
Chapter 1: Product introduction
1-15
E7361_P8H61-M2-TPM-SI R2.0_Manua15 15
5/16/12 1:44:11 PM
DDR3-1600 (O.C.) MHz capability
DIMM socket support
(Optional)
Vendors
Part No.
Size
SS/DS Chip Brand
Chip NO. Timing
Voltage
1 DIMM 2 DIMMs 4 DIMMs
A-DATA
Corsair
AX3U1600GC4G9-2G(XMP)
TR3X6G1600C8 G(XMP)
8GB(2 x 4GB) DS
6GB(3 x 2GB) DS
8GB(4 x 2GB) DS
6GB(3 x 2GB) DS
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
9-9-9-24 1.55V-1.75V
8-8-8-24 1.65V
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Corsair
CMX8GX3M4A1600C9(XMP)
BL25664BN1608.16FF(XMP)
9-9-9-24 1.65V
Crucial
-
-
G.SKILL
G.SKILL
G.SKILL
G.SKILL
Kingmax
Kingmax
Kingston
Kingston
F3-12800CL7D-4GBECO(XMP) 4GB(2 x 2GB) DS
F3-12800CL7D-4GBRM(XMP) 4GB(2 x 2GB) DS
7-7-8-24 XMP 1.35V
7-8-7-24 1.6V
F3-12800CL9D-4GBRL(XMP)
F3-12800CL9T-6GBNQ(XMP)
4GB(2 x 2GB) DS
6GB(3 x 2GB) DS
9-9-9-24 1.5V
9-9-9-24 1.5V~1.6V
FLGD45F-B8MF7 MAEH(XMP) 1GB
FLGE85F-B8KJ9A FEIS(XMP) 2GB
SS
DS
7
-
-
-
•
KHX1600C9D3K3/12GX(XMP) 12GB(3x4GB) DS
KHX1600C8D3K2/4GX(XMP) 4GB(2 x 2GB) DS
9-9-9-27 1.65V
8
1.65V
DDR3-1333 MHz capability (IVY Bridge CPU)
DIMM socket support
(Optional)
Chip
Brand
Vendors Part No.
Size
SS/DS
Chip NO.
Timing Voltage
1 DIMM 2 DIMMs 4 DIMMs
A-DATA
Apacer
Corsair
Corsair
AD63I1C1624EV
4GB
2GB
DS
DS
A-Data
3CCA-1509A
-
-
-
•
•
•
•
•
•
•
•
•
•
•
•
78.A1GC6.9L1
Apacer
AM5D5808FEQSBG
9
TR3X6G1333C9 G
CMD8GX3M4A1333C7
6GB(3x 2GB) SS
8GB(4 x 2GB) DS
-
-
-
-
-
9-9-9-24 1.50V
7-7-7-20 1.60V
-
G.SKILL F3-10600CL8D-2GBHK(XMP) 1GB
SS
G.SKILL
-
-
-
G.SKILL F3-10666CL7D-8GBRH(XMP) 8GB(2 x 4GB) DS
7-7-7-21 1.5V
1.35V(low
voltage)
Hynix
HMT125U6TFR8A-H9
2GB
1GB
DS
Hynix
H5TC1G83TFRH9A
-
•
•
Kingmax FLFD45F-B8KL9 NAES
SS
SS
DS
Kingmax KKB8FNWBFGNX-27A
ELPIDA J1108BDBG-DJ-F
ELPIDA J1108BDSE-DJ-F
-
-
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Kingston KVR1333D3N9/1G(low profile) 1GB
Kingston KVR1333D3N9/2G 2GB
9
9
9
-
1.5V
1.5V
Kingston KHX1333C9D3UK2/4GX(XMP) 4GB(2 x 2GB) DS
-
-
XMP 1.25V
Micron
PSC
MT8JTF25664AZ-1G4D1
AL7F8G73F-DJ2
2GB
1GB
2GB
1GB
2GB
SS
SS
DS
SS
DS
Micron
PSC
PSC
OJD12D9LGK
A3P1GF3FGF
A3P1GF3FGF
-
-
-
-
-
-
PSC
AL8F8G73F-DJ2
-
Samsung M378B2873FHS-CH9
Samsung M378B5673FH0-CH9
Samsung K4B1G0846F
Samsung K4B1G0846F
-
•
-
DDR3-1333 MHz capability (Sandy Bridge CPU)
DIMM socket support
(Optional)
SS/ Chip
DS Brand
Vendors
Part No.
Size
Chip NO.
Timing Voltage
1 DIMM 2 DIMMs 4 DIMMs
A-DATA
Apacer
Apacer
Apacer
Corsair
Corsair
Crucial
G.SKILL
G.SKILL
GEIL
AM2U139C2P1
2GB
2GB
2GB
4GB
SS ADATA
DS Apacer
DS Apacer
DS Apacer
3CCD-1509A EL1127T
-
-
-
-
-
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
78.A1GC6.9L1
AM5D5808DEWSBG
-
78.A1GC6.9L1
AM5D5808FEQSBG
9
-
78.B1GDE.9L10C
TR3X6G1333C9 G
CMD8GX3M4A1333C7
CT25664BA1339.16FF
AM5D5908CEHSBG
6GB(3 x 2GB) SS
8GB(4 x 2GB) DS
-
-
-
9-9-9-24 1.50V
7-7-7-20 1.60V
-
2GB
DS Micron
9KF27D9KPT
9
-
F3-10666CL8D-4GBECO(XMP) 4GB(2 x 2GB) DS
F3-10666CL7D-8GBRH(XMP) 8GB(2 x 4GB) DS
-
-
-
-
-
-
8-8-8-24 XMP 1.35V
7-7-7-21 1.5V
9-9-9-24 1.5V
9-9-9-24 1.5V
7-7-7-24 1.5V
-
GV32GB1333C9DC
GV34GB1333C9DC
GVP34GB1333C7DC
HMT325U6BFR8C-H9
2GB(2 x 1GB) DS
4GB(2 x 2GB) DS
4GB(2 x 2GB) DS
-
GEIL
-
GEIL
-
Hynix
2GB
SS Hynix
H5TQ2G83BFRH9C
-
-
•
1.35V(low
voltage)
Hynix
HMT125U6TFR8A-H9
2GB
DS Hynix
H5TC1G83TFRH9A
-
•
•
Kingmax
Kingmax
Kingston
Kingston
Micron
FLFD45F-B8KL9 NAES
FLFE85F-C8KF9 CAES
KVR1333D3N9/2G
1GB
2GB
2GB
SS Kingmax KKB8FNWBFGNX-27A
SS Kingmax KFC8FMFXF-DXX-15A
-
-
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
-
-
DS KTC
D1288JPNDPLD9U
-
9
9
-
1.5V
KHX1333C9D3UK2/4GX(XMP) 4GB(2 x 2GB) DS
-
XMP 1.25V
MT8JTF25664AZ-1G4M1
MT16JTF25664AZ-1G4F1
AL7F8G73F-DJ2
2GB
2GB
1GB
2GB
1GB
2GB
2GB
4GB
1GB
SS MICRON IJM22 D9PFJ
-
-
-
-
-
-
-
-
-
-
-
-
•
Micron
DS Micron
SS PSC
DS PSC
9KF27D9KPT
A3P1GF3FGF
A3P1GF3FGF
9
-
PSC
PSC
AL8F8G73F-DJ2
-
Samsung
Samsung
Samsung
Samsung
M378B2873FHS-CH9
M378B5773DH0-CH9
M378B5673FH0-CH9
M378B5273CH0-CH9
SS Samsung K4B1G0846F
SS Samsung K4B2G0846D
DS Samsung K4B1G0846F
DS Samsung K4B2G0846C
-
-
•
•
-
-
Super Talent W1333UA1GH
Super Talent W1333UX2G8(XMP)
Super Talent W1333UB2GS
SS Hynix
H5TQ1G83TFR
-
9
8
9
-
2GB(2 x 1GB) SS
-
2GB
8GB
DS Samsung K4B1G0846F
DS Micron IVD22D9PBC
Transcend
TS1GLK64V3H
1-16
ASUS P8H61-M2/TPM/SI R2.0
E7361_P8H61-M2-TPM-SI R2.0_Manua16 16
5/16/12 1:44:14 PM
DDR3-1066 MHz capability (IVY Bridge CPU)
DIMM socket support (Optional)
Chip
Brand
Vendors Part No.
Size SS/DS
Chip NO.
Timing Voltage
1 DIMM
2 DIMMs 4 DIMMs
Crucial
Crucial
CT12864BA1067.8FF
CT25664BA1067.16FF
1GB SS
2GB DS
Micron
Micron
9GF22D9KPT
9HF22D9KPT
7
7
-
-
•
•
•
•
•
1.35V(low
voltage)
ELPIDA EBJ10UE8EDF0-AE-F
ELPIDA EBJ21UE8EDF0-AE-F
1GB SS
2GB DS
ELPIDA J1108EDSE-DJ-F
ELPIDA J1108EDSE-DJ-F
-
-
•
•
•
•
•
1.35V(low
voltage)
Kingston KVR1066D3N7/1G(low profile) 1GB SS
ELPIDA J1108BFSE-DJ-F
ELPIDA J1108BDSE-DJ-F
7
7
7
7
1.5V
•
•
•
•
•
•
•
•
•
•
Kingston KVR1066D3N7/2G
2GB DS
1GB SS
2GB DS
1.5V
Micron
Micron
MT8JTF12864AZ-1G1F1
MT16JTF25664AZ-1G1F1
Micron
Micron
9GF22D9KPT
9HF22D9KPT
-
-
DDR3-1066 MHz capability (Sandy Bridge CPU)
DIMM socket support (Optional)
Chip
Brand
Vendors Part No.
Size SS/DS
Chip NO.
Timing Voltage
1 DIMM
2 DIMMs 4 DIMMs
Crucial
Crucial
CT12864BA1067.8FF
CT25664BA1067.16FF
1GB SS
2GB DS
Micron
Micron
9GF22D9KPT
9HF22D9KPT
7
7
-
-
•
•
•
•
•
1.35V(low
voltage)
ELPIDA EBJ10UE8EDF0-AE-F
1GB SS
ELPIDA J1108EDSE-DJ-F
-
•
•
•
•
Kingston KVR1066D3N7/1G(low profile) 1GB SS
ELPIDA J1108BFSE-DJ-F
ELPIDA J1108BDSE-DJ-F
7
7
7
7
7
1.5V
1.5V
1.5V
-
•
•
•
•
•
•
•
•
•
•
Kingston KVR1066D3N7/2G
Kingston KVR1066D3N7/4G
2GB DS
4GB DS
1GB SS
2GB DS
Hynix
H5TQ2G83AFR
9GF22D9KPT
9HF22D9KPT
Micron
Micron
MT8JTF12864AZ-1G1F1
MT16JTF25664AZ-1G1F1
Micron
Micron
-
Side(s): SS - Single-sided DS - Double-sided
DIMM support:
•
1 DIMM: Supports one (1) module inserted into any slot as Single-channel memory
configuration. We suggest that you install the module into A2 slot.
•
2 DIMMs: Supports two (2) modules inserted into either the blue slots or the black slots
as one pair of Dual-channel memory configuration. We suggest that you
install the modules into slots A2 and B2 for better compatibility.
•
4 DIMMs: Supports four (4) modules inserted into both the blue and black slots as two
pairs of Dual-channel memory configuration.
•
•
ASUS exclusively provides hyper DIMM support function.
Hyper DIMM support is subject to the physical characteristics of individual CPUs. Load
the X.M.P. or D.O.C.P. settings in the BIOS for the hyper DIMM support.
•
Visit the ASUS website for the latest QVL.
The following table shows how to use the DIMM slots:
DIMM_A1
DIMM_A2
DIMM_B1
DIMM_B2
1
2
3
4
5
6
7
SS
SS
SS
SS
DS
DS
DS
SS
DS
SS
SS
SS
* SS: Single-sided
DS: Double-sided
Chapter 1: Product introduction
1-17
E7361_P8H61-M2-TPM-SI R2.0_Manua17 17
5/16/12 1:44:15 PM
1.7.3
Installing a DIMM
Unplug the power supply before adding or removing DIMMs or other system components.
Failure to do so can cause severe damage to both the motherboard and the components.
2
1.
2.
Press the retaining clips outward to
unlock a DIMM socket.
DIMM notch
Align a DIMM on the socket such that
the notch on the DIMM matches the
DIMM slot key on the socket.
1
1
DIMM slot key
Unlocked retaining clip
A DIMM is keyed with a notch so that it fits in only one direction. DO NOT force a DIMM into
a socket in the wrong direction to avoid damaging the DIMM.
3.
Firmly insert the DIMM into the socket
until the retaining clips snap back in place
and the DIMM is properly seated.
3
Locked Retaining Clip
1.7.4
Removing a DIMM
To remove a DIMM:
1. Simultaneously press the retaining clips
outward to unlock the DIMM.
2
Support the DIMM lightly with your
fingers when pressing the retaining
clips. The DIMM might get damaged
when it flips out with extra force.
1
1
DIMM notch
2.
Remove the DIMM from the socket.
1-18
ASUS P8H61-M2/TPM/SI R2.0
E7361_P8H61-M2-TPM-SI R2.0_Manua18 18
5/16/12 1:44:18 PM
1.8
Expansion slots
In the future, you may need to install expansion cards. The following sub-sections describe
the slots and the expansion cards that they support.
Unplug the power cord before adding or removing expansion cards. Failure to do so may
cause you physical injury and damage motherboard components.
1.8.1
Installing an expansion card
To install an expansion card:
1.
Before installing the expansion card, read the documentation that came with it and
make the necessary hardware settings for the card.
2.
3.
Remove the system unit cover (if your motherboard is already installed in a chassis).
Remove the bracket opposite the slot that you intend to use. Keep the screw for later
use.
4.
Align the card connector with the slot and press firmly until the card is completely
seated on the slot.
5.
6.
Secure the card to the chassis with the screw you removed earlier.
Replace the system cover.
1.8.2
Configuring an expansion card
After installing the expansion card, configure it by adjusting the software settings.
1.
Turn on the system and change the necessary BIOS settings, if any. See Chapter 2 for
information on BIOS setup.
2.
3.
Assign an IRQ to the card.
Install the software drivers for the expansion card.
When using PCI cards on shared slots, ensure that the drivers support “Share IRQ” or that
the cards do not need IRQ assignments. Otherwise, conflicts will arise between the two PCI
groups, making the system unstable and the card inoperable.
1.8.3
PCI slots
The PCI slot supports cards such as a LAN card, SCSI card, USB card, and other cards that
comply with PCI specifications.
1.8.4
PCI Express x1 slot
This motherboard supports PCI Express x1 network cards, SCSI cards, and other cards that
comply with the PCI Express specifications.
1.8.5
PCI Express x16 slot
This motherboard has a PCI Express 3.0/2.0 x16 slot that supports PCI Express 3.0/2.0 x16
graphic cards complying with the PCI Express specifications.
Chapter 1: Product introduction
1-19
E7361_P8H61-M2-TPM-SI R2.0_Manua19 19
5/16/12 1:44:19 PM
1.9
Jumpers
Clear RTC RAM (3-pin CLRTC)
This jumper allows you to clear the Real Time Clock (RTC) RAM in CMOS. You can
clear the CMOS memory of date, time, and system setup parameters by erasing
the CMOS RTC RAM data. The onboard button cell battery powers the RAM data in
CMOS, which include system setup information such as system passwords.
CLRTC
1
2
2
3
P8H61-M2/TPM/SI R2.0
Normal
Clear RTC
(Default)
P8H61-M2/TPM/SI R2.0 Clear RTC RAM
To erase the RTC RAM:
1. Turn OFF the computer and unplug the power cord.
2. Move the jumper cap from pins 1-2 (default) to pins 2-3. Keep the cap on pins 2-3
for about 5-10 seconds, then move the cap back to pins 1-2.
3. Plug the power cord and turn ON the computer.
4. Hold down the <Del> key during the boot process and enter BIOS setup to re-enter
data.
Except when clearing the RTC RAM, never remove the cap on CLRTC jumper default
position. Removing the cap will cause system boot failure!
•
•
If the steps above do not help, remove the onboard battery and move the jumper again
to clear the CMOS RTC RAM data. After clearing the CMOS, reinstall the battery.
You do not need to clear the RTC when the system hangs due to overclocking. For
system failure due to overclocking, use the CPU Parameter Recall (C.P.R.) feature. Shut
down and reboot the system, then the BIOS automatically resets parameter settings to
default values.
1-20
ASUS P8H61-M2/TPM/SI R2.0
E7361_P8H61-M2-TPM-SI R2.0_Manua20 20
5/16/12 1:44:20 PM
1.10
Connectors
1.10.1
Rear panel ports
3 4
1
2
5
10
9
8
7
6
1.
2.
PS/2 keyboard/mouse combo port. This port is for a PS/2 keyboard/mouse.
LAN (RJ-45) port. This port allows connection to a Local Area Network (LAN) through
a network hub. Refer to the table below for the LAN port LED indications.
ACT/LINK SPEED
LAN port LED indications
LED
LED
Activity/Link LED
Speed LED
Status
Status
Description
Description
OFF
No link
OFF
10Mbps connection
100Mbps connection
1Gbps connection
ORANGE
BLINKING
Linked
ORANGE
GREEN
Data activity
LAN port
3.
Line In port (light blue). This port connects a tape, CD, DVD player, or other audio
sources.
4.
5.
Line Out port (lime). This port connects a headphone or a speaker. In 4, 6, and
8-channel configurations, the function of this port becomes Front Speaker Out.
Microphone port (pink). This port connects a microphone.
Refer to the audio configuration table below for the function of the audio ports in 2, 4, 6, or
8-channel configuration.
Audio 2, 4, 6, or 8-channel configuration
Port
Headset 2-channel
4-channel
Rear Speaker Out
Front Speaker Out
Mic In
6-channel
Rear Speaker Out
Front Speaker Out
Bass/Center
—
8-channel
Light Blue (Rear panel)
Lime (Rear panel)
Pink (Rear panel)
Lime (Front panel)
Line In
Line Out
Mic In
—
Rear Speaker Out
Front Speaker Out
Bass/Center
—
Side Speaker Out
To configure an 8-channel audio output:
Use a chassis with HD audio module in the front panel to support an 8-channel audio
output.
Chapter 1: Product introduction
1-21
E7361_P8H61-M2-TPM-SI R2.0_Manua21 21
5/16/12 1:44:24 PM
6.
7.
8.
9.
USB 2.0 ports 1 and 2. These two 4-pin Universal Serial Bus (USB) ports are
available for connecting USB 2.0 devices.
USB 2.0 ports 3 and 4. These two 4-pin Universal Serial Bus (USB) ports are
available for connecting USB 2.0 devices.
Video Graphics Adapter (VGA) port. This 15-pin port is for a VGA monitor or other
VGA-compatible devices.
DVI-D port. This port is for any DVI-D compatible device and is HDCP compliant
allowing playback of HD DVD, Blu-ray, and other protected content.
10. USB 2.0 ports 5 and 6. These two 4-pin Universal Serial Bus (USB) ports connect to
USB 2.0/1.1 devices.
1.10.2
Internal connectors
1.
ATX power connectors (24-pin EATXPWR, 4-pin ATX12V)
These connectors are for ATX power supply plugs. The power supply plugs are
designed to fit these connectors in only one orientation. Find the proper orientation and
push down firmly until the connectors completely fit.
ATX12V
EATXPWR
+3 Volts
GND
+12 Volts
+12 Volts
+5V Standby
Power OK
GND
+5 Volts
+5 Volts
+5 Volts
-5 Volts
GND
PIN 1
+5 Volts
GND
GND
GND
+5 Volts
GND
PSON#
GND
P8H61-M2/TPM/SI R2.0
+3 Volts
+3 Volts
-12 Volts
+3 Volts
PIN 1
P8H61-M2/TPM/SI R2.0 ATX power connectors
•
For a fully configured system, we recommend that you use a power supply unit (PSU)
that complies with ATX 12V Specification 2.0 or later version and provides a minimum
power of 400W.
•
DO NOT forget to connect the 4-pin ATX12V power plug. Otherwise, the system will not
boot.
•
We recommend that you use a PSU with a higher power output when configuring a
system with more power-consuming devices or when you intend to install additional
devices. The system may become unstable or may not boot up if the power is
inadequate.
•
If you are uncertain about the minimum power supply requirement for your system,
com/PowerSupplyCalculator/PSCalculator.aspx?SLanguage=en-us for details.
1-22
ASUS P8H61-M2/TPM/SI R2.0
E7361_P8H61-M2-TPM-SI R2.0_Manua22 22
5/16/12 1:44:25 PM
2.
CPU and Chassis fan connectors (4-pin CPU_FAN, 3-pin CHA_FAN)
Connect the fan cables to the fan connectors on the motherboard, ensuring that the
black wire of each cable matches the ground pin of the connector.
CPU_FAN
CHA_FAN
P8H61-M2/TPM/SI R2.0
GND
+12V
Rotation
P8H61-M2/TPM/SI R2.0 Fan connectors
DO NOT forget to connect the fan cables to the fan connectors. Insufficient air flow inside
the system may damage the motherboard components. These are not jumpers! Do not
place jumper caps on the fan connectors!
•
•
The CPU_FAN connector supports a CPU fan of maximum 1A (12 W) fan power.
Only the 4-pin CPU fan supports the ASUS Fan Xpert 2 feature.
3.
Serial port connectors (10-1 pin COM1)
The connector is for a serial (COM) port. Connect the serial port module cable to the
connector, then install the module to a slot opening at the back of the system chassis.
The serial port module is purchased separately.
COM1
PIN 1
P8H61-M2/TPM/SI R2.0
P8H61-M2/TPM/SI R2.0 Serial port (COM1) connector
Chapter 1: Product introduction
1-23
E7361_P8H61-M2-TPM-SI R2.0_Manua23 23
5/16/12 1:44:27 PM
4.
LPT connector (26-1 pin LPT)
The LPT (Line Printing Terminal) connector supports devices such as a printer. LPT is
standardized as IEEE 1284, which is the parallel port interface on IBM PC-compatible
computers.
LPT
SLCT
PE
GND
GND
GND
GND
GND
GND
GND
GND
SLIN#
INIT#
ERR#
AFD
BUSY
ACK#
PD7
PD6
PD5
PD4
PD3
PD2
PD1
PD0
STB#
P8H61-M2/TPM/SI R2.0
PIN 1
P8H61-M2/TPM/SI R2.0 parallel port connector
5.
System panel connector (10-1 pin F_PANEL)
This connector supports several chassis-mounted functions.
F_PANEL
PLED PWRBTN
PIN 1
P8H61-M2/TPM/SI R2.0
+HDLED RESET
P8H61-M2/TPM/SI R2.0 System panel connector
•
•
System power LED (2-pin PLED)
This 2-pin connector is for the system power LED. Connect the chassis power LED
cable to this connector. The system power LED lights up when you turn on the system
power, and blinks when the system is in sleep mode.
Hard disk drive activity LED (2-pin +HDLED)
This 2-pin connector is for the HDD Activity LED. Connect the HDD Activity LED cable
to this connector. The HD LED lights up or flashes when data is read from or written to
the HDD.
•
•
ATX power button/soft-off button (2-pin PWRBTN)
This 2-pin connector is for the system power button.
Reset button (2-pin RESET)
This 2-pin connector is for the chassis-mounted reset button for system reboot without
turning off the system power.
1-24
ASUS P8H61-M2/TPM/SI R2.0
E7361_P8H61-M2-TPM-SI R2.0_Manua24 24
5/16/12 1:44:28 PM
6.
Serial ATA 3.0 Gb/s connectors (7-pin SATA3G_1-4)
These connectors connect to Serial ATA 3.0 Gb/s hard disk drives and optical drives via
Serial ATA 3.0 Gb/s signal cables.
SATA3G_3
SATA3G_1
SATA3G_4
SATA3G_2
P8H61-M2/TPM/SI R2.0
P8H61-M2/TPM/SI R2.0 Intel® SATA 3.0Gb/s connectors
•
•
•
•
•
You must install Windows® XP Service Pack 3 or later version before using Serial ATA
hard disk drives.
Due to H61 Chipset limitation, AHCI Mode only works on Windows® Vista / Windows® 7.
Please use IDE Mode on Windows® XP.
[IDE] is the default SATA type. Under Windows® XP, there is no need to change the
SATA type.
To configure the SATA type in BIOS, click Advanced Mode > Advanced tab > SATA
Configuration > SATA Mode Selection.
When using hot-plug and NCQ on Windows® Vista / Windows® 7, set the SATA Mode
Selection item in the BIOS to [AHCI]. See section 2.5.4 SATA Configuration for details.
7.
Front panel audio connector (10-1 pin AAFP)
This connector is for a chassis-mounted front panel audio I/O module that supports
either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel
audio I/O module cable to this connector.
AAFP
PIN 1
P8H61-M2/TPM/SI R2.0
HD-audio-compliant
pin definition
Legacy AC’97
compliant definition
P8H61-M2/TPM/SI R2.0 Front panel audio connector
•
We recommend that you connect a high-definition front panel audio module to this
connector to avail of the motherboard’s high-definition audio capability.
•
If you want to connect a high-definition front panel audio module to this connector, set
the Front Panel Type item in the BIOS setup to [HD]. If you want to connect an AC'97
front panel audio module to this connector, set the item to [AC97]. By default, this
connector is set to [HD]. See section 2.5.7 Onboard Devices Configuration for details.
Chapter 1: Product introduction
1-25
E7361_P8H61-M2-TPM-SI R2.0_Manua25 25
5/16/12 1:44:30 PM
8.
USB 2.0 connectors (10-1 pin USB78, USB910)
These connectors are for USB 2.0 ports. Connect the USB module cable to any of
these connectors, then install the module to a slot opening at the back of the system
chassis. These USB connectors comply with USB 2.0 specification that supports up to
480Mbps connection speed.
USB910
USB78
P8H61-M2/TPM/SI R2.0
PIN 1
PIN 1
P8H61-M2/TPM/SI R2.0 USB2.0 connectors
Never connect a 1394 cable to the USB connectors. Doing so will damage the
motherboard!
The USB 2.0 module is purchased separately.
9.
Speaker connector (4- pin SPEAKER)
This 4-pin connector is for the chassis-mounted system warning speaker. The speaker
allows you to hear system beeps and warnings.
SPEAKER
P8H61-M2/TPM/SI R2.0
PIN 1
P8H61-M2/TPM/SI R2.0 speaker out connector
1-26
ASUS P8H61-M2/TPM/SI R2.0
E7361_P8H61-M2-TPM-SI R2.0_Manua26 26
5/16/12 1:44:33 PM
10. Digital audio connector (4-1 pin SPDIF_OUT)
This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port.
P8H61-M2/TPM/SI R2.0
SPDIF_OUT
P8H61-M2/TPM/SI R2.0 Digital audio connector
The S/PDIF module is purchased separately.
Chapter 1: Product introduction
1-27
E7361_P8H61-M2-TPM-SI R2.0_Manua27 27
5/16/12 1:44:34 PM
1.11
Software support
1.11.1
Installing an operating system
This motherboard supports Windows® XP / Vista / 7 Operating Systems (OS). Always install
the latest OS version and corresponding updates to maximize the features of your hardware.
•
•
Motherboard settings and hardware options vary. Refer to your OS documentation for
detailed information.
Ensure that you install Windows® XP Service Pack 3 or later versions / Windows® Vista
Service Pack 1 or later versions before installing the drivers for better compatibility and
system stability.
1.11.2
Support DVD information
The Support DVD that comes with the motherboard package contains the drivers, software
applications, and utilities that you can install to avail all motherboard features.
The contents of the Support DVD are subject to change at any time without notice. Visit the
To run the Support DVD
Place the Support DVD to the optical drive. If Autorun is enabled in your computer, the DVD
automatically displays the Specials screen. Click Drivers, Utilities, Manual, Contact, and
Specials tabs to display their respective menus.
The following screen is for reference only.
Click an icon to
display Support DVD/
motherboard information
Click an item to install
If Autorun is NOT enabled in your computer, browse the contents of the Support DVD to
locate the file ASSETUP.EXE from the BIN folder. Double-click the ASSETUP.EXE to run
the DVD.
1-28
ASUS P8H61-M2/TPM/SI R2.0
E7361_P8H61-M2-TPM-SI R2.0_Manua28 28
5/16/12 1:44:35 PM
Chapter 2
BIOS information
2.1
Managing and updating your BIOS
Save a copy of the original motherboard BIOS file to a USB flash disk in case you need to
restore the BIOS in the future. Copy the original motherboard BIOS using the ASUS Update
utility.
2.1.1
ASUS Update utility
The ASUS Update is a utility that allows you to manage, save, and update the motherboard
BIOS in Windows® environment.
•
•
ASUS Update requires an Internet connection either through a network or an Internet
Service Provider (ISP).
This utility is available in the support DVD that comes with the motherboard package.
Installing ASUS Update
To install ASUS Update:
1.
2.
3.
Place the support DVD in the optical drive. The Specials menu appears.
Click the Utilities tab, then click AI Suite II.
Follow the onscreen instructions to complete the installation.
Quit all Windows® applications before you update the BIOS using this utility.
Updating the BIOS
To update the BIOS:
1.
From the Windows® desktop, click Start > Programs > ASUS > AI Suite II > AI Suite
II X.XX.XX to launch the AI Suite II utility. The AI Suite II Quick Bar appears.
2.
Click Update button from the Quick Bar, and then click ASUS Update from the popup
menu. The ASUS Update main screen appears. From the list, select either of the
following methods:
Updating from the Internet
a. Select Update BIOS from the Internet, then click Next.
b. Select the ASUS FTP site nearest you to avoid network traffic, then click Next.
c. From the FTP site, select the BIOS version that you wish to download then click
Next.
Chapter 2: BIOS information
2-1
E7361_P8H61-M2-TPM-SI R2.0_Manua1
1
5/16/12 1:44:37 PM
The ASUS Update utility is capable of updating itself through the Internet. Always update
the utility to avail all its features.
Updating from a BIOS file
a. Select Update BIOS from file, then click Next.
b. Locate the BIOS file from the Open window, then click Open.
Follow the onscreen instructions to complete the updating process.
3.
2.1.2
ASUS EZ Flash 2
The ASUS EZ Flash 2 feature allows you to update the BIOS without using an OS-based
utility.
Before you start using this utility, download the latest BIOS file from the ASUS website at
To update the BIOS using EZ Flash 2:
1.
Insert the USB flash disk that contains the latest BIOS file to the USB port.
2.
Enter the Advanced Mode of the BIOS setup program. Go to the Tool menu to select
ASUS EZ Flash 2 Utility and press <Enter> to enable it.
Exit
ASUS EZ Flash 2 Utility v01.04
Flash Info
MODEL: P8H61-M2/TPM/SI R2.0
VER: 0304
DATE: 04/20/2012
File Path: fs0:\
Drive
Folder Info
04/20/12 09:47a
fs0:\
8390656
H61M2TR.CAP
File Info
MODEL:
VER:
DATE
Help Info
[Enter] Select or Load
[Tab] Switch
[Up/Down/PageUp/PageDown/Home/End] Move
[Esc] Exit
2-2
ASUS P8H61-M2 Series
E7361_P8H61-M2-TPM-SI R2.0_Manua2
2
5/16/12 1:44:39 PM
3.
Press <Tab> to switch to the Drive field.
4.
Press the Up/Down arrow keys to find the USB flash disk that contains the latest BIOS,
and then press <Enter>.
5.
Press <Tab> to switch to the Folder Info field.
6.
Press the Up/Down arrow keys to find the BIOS file, and then press <Enter> to perform
the BIOS update process. Reboot the system when the update process is done.
•
This function supports USB flash disks with FAT 32/16 format and single partition only.
•
DO NOT shut down or reset the system while updating the BIOS to prevent system boot
failure!
2.1.3
ASUS CrashFree BIOS 3 utility
The ASUS CrashFree BIOS 3 is an auto recovery tool that allows you to restore the BIOS file
when it fails or gets corrupted during the updating process. You can restore a corrupted BIOS
file using the motherboard support DVD or a USB flash drive that contains the updated BIOS
file.
•
•
Before using this utility, rename the BIOS file in the removable device into
H61M2TR.CAP.
The BIOS file in the support DVD may not be the latest version. Download the latest
BIOS file from the ASUS website at www.asus.com.
Recovering the BIOS
To recover the BIOS:
1.
Turn on the system.
2.
Insert the support DVD to the optical drive or the USB flash drive that contains the
BIOS file to the USB port.
3.
The utility automatically checks the devices for the BIOS file. When found, the utility
reads the BIOS file and enters ASUS EZ Flash 2 utility automatically.
4.
The system requires you to enter BIOS Setup to recover BIOS setting. To ensure
DO NOT shut down or reset the system while updating the BIOS! Doing so can cause
system boot failure!
Chapter 2: BIOS information
2-3
E7361_P8H61-M2-TPM-SI R2.0_Manua3
3
5/16/12 1:44:41 PM
2.1.4
ASUS BIOS Updater
The ASUS BIOS Updater allows you to update BIOS in DOS environment. This utility also
allows you to copy the current BIOS file that you can use as a backup when the BIOS fails or
gets corrupted during the updating process.
The succeeding utility screens are for reference only. The actual utility screen displays may
not be same as shown.
Before updating BIOS
1.
Prepare the motherboard support DVD and a USB flash drive in FAT32/16 format and
single partition.
2.
Download the latest BIOS file and BIOS Updater from the ASUS website at
http://support.asus.com and save them on the USB flash drive.
NTFS is not supported under DOS environment. Do not save the BIOS file and BIOS
Updater to a hard disk drive or USB flash drive in NTFS format.
3.
Turn off the computer and disconnect all SATA hard disk drives (optional).
Booting the system in DOS environment
1.
Insert the USB flash drive with the latest BIOS file and BIOS Updater to the USB port.
2.
Boot your computer. When the ASUS Logo appears, press <F8> to show the BIOS
Boot Device Select Menu. Insert the support DVD into the optical drive and select the
optical drive as the boot device.
Please select boot device:
SATA: XXXXXXXXXXXXXXXX
USB XXXXXXXXXXXXXXXXX
UEFI: XXXXXXXXXXXXXXXX
Enter Setup
↑ and ↓ to move selection
ENTER to select boot device
ESC to boot using defaults
3.
4.
When the Make Disk menu appears, select the FreeDOS command prompt item by
pressing the item number.
At the FreeDOS prompt, type d:and press <Enter> to switch the disk from
Drive C (optical drive) to Drive D (USB flash drive).
Welcome to FreeDOS (http://www.freedos.org)!
C:\>d:
D:\>
2-4
ASUS P8H61-M2 Series
E7361_P8H61-M2-TPM-SI R2.0_Manua4
4
5/16/12 1:44:42 PM
Updating the BIOS file
To update the BIOS file using BIOS Updater
1.
At the FreeDOS prompt, type bupdater /pc /gand press <Enter>.
D:\>bupdater /pc /g
2.
The BIOS Updater screen appears as below.
ASUSTek BIOS Updater for DOS V1.07
Current ROM
P8H61-M2/TPM/SI R2.0
VER: 0304
DATE: 04/20/2012
Update ROM
BOARD: Unknown
VER: Unknown
BOARD:
DATE: Unknown
PATH: A:\
A:
H61M2TR.CAP
8390656 2012-04-20 17:30:48
Note
[Enter] Select or Load
[Up/Down/Home/End] Move
[Tab] Switch
[Esc] Exit
[V] Drive Info
3.
Press <Tab> to switch between screen fields and use the <Up/Down/Home/End> keys
to select the BIOS file and press <Enter>. BIOS Updater checks the selected BIOS file
and prompts you to confirm BIOS update.
Are you sure to update BIOS?
Yes
No
4.
Select Yes and press <Enter>. When BIOS update is done, press <ESC> to exit BIOS
Updater. Restart your computer.
DO NOT shut down or reset the system while updating the BIOS to prevent system boot
failure!
•
•
For BIOS Updater version 1.04 or later, the utility automatically exits to the DOS prompt
after updating BIOS.
Ensure to load the BIOS default settings to ensure system compatibility and stability.
Select the Load Optimized Defaults item under the Exit menu. Refer to section 2.9
Exit menu for details.
•
Ensure to connect all SATA hard disk drives after updating the BIOS file if you have
disconnected them.
Chapter 2: BIOS information
2-5
E7361_P8H61-M2-TPM-SI R2.0_Manua5
5
5/16/12 1:44:43 PM
2.2
BIOS setup program
Use the BIOS Setup program to update the BIOS or configure its parameters. The BIOS
screens include navigation keys and brief online help to guide you in using the BIOS Setup
program.
Entering BIOS Setup at startup
To enter BIOS Setup at startup:
•
Press <Delete> during the Power-On Self Test (POST). If you do not press <Delete>,
POST continues with its routines.
Entering BIOS Setup after POST
To enter BIOS Setup after POST:
•
•
•
Press <Ctrl>+<Alt>+<Del> simultaneously.
Press the reset button on the system chassis.
Press the power button to turn the system off then back on. Do this option only if you
failed to enter BIOS Setup using the first two options.
Using the power button, reset button, or the <Ctrl>+<Alt>+<Del> keys to force reset from
a running operating system can cause damage to your data or system. We recommend to
always shut down the system properly from the operating system.
•
•
•
The BIOS setup screens shown in this section are for reference purposes only, and may
not exactly match what you see on your screen.
Ensure that a USB mouse is connected to your motherboard if you want to use the
mouse to control the BIOS setup program.
The default BIOS settings for this motherboard apply for most conditions to ensure
optimum performance. If the system becomes unstable after changing any BIOS
settings, load the default settings to ensure system compatibility and stability. Select the
Load Optimized Defaults item under the Exit Menu. See section 2.9 Exit Menu.
•
•
If the system fails to boot after changing any BIOS setting, try to clear the CMOS and
reset the motherboard to the default value. Refer to section 1.9 Jumpers on how to
erase the RTC RAM.
The BIOS setup program does not support the bluetooth devices.
BIOS menu screen
The BIOS setup program can be used under two modes: EZ Mode and Advanced Mode.
You can change modes from the Exit menu or from the Exit/Advanced Mode button in the
EZ Mode/Advanced Mode screen.
2-6
ASUS P8H61-M2 Series
E7361_P8H61-M2-TPM-SI R2.0_Manua6
6
5/16/12 1:44:43 PM
EZ Mode
By default, the EZ Mode screen appears when you enter the BIOS setup program. The EZ
Mode provides you an overview of the basic system information, and allows you to select
the display language, system performance mode and boot device priority. To access the
Advanced Mode, click Exit/Advanced Mode or press Esc, then select Advanced Mode or
press F7 hot key for the advanced BIOS settings.
The default screen for entering the BIOS setup program can be changed. Refer to the
Setup Mode item in section 2.7 Boot menu for details.
Selects the display language of
the BIOS setup program
Displays the CPU/motherboard temperature,
Exits the BIOS setup program without saving
CPU/5V/3.3V/12V voltage output,
CPU/chassis fan speed
the changes, saves the changes and resets
the system, or enters the Advanced Mode
Silent mode
Standard mode
Loads optimized default
Turbo mode
Selects the boot device priority
Displays the system properties of the
selected mode on the right hand side
Displays the Advanced mode menus
Selects the Advanced
mode functions
Selects the boot
device priority
•
•
The boot device options vary depending on the devices you installed to the system.
The Boot Menu(F8) button is available only when the boot device is installed to the
system.
Chapter 2: BIOS information
2-7
E7361_P8H61-M2-TPM-SI R2.0_Manua7
7
5/16/12 1:44:46 PM
Advanced Mode
The Advanced Mode provides advanced options for experienced end-users to configure
the BIOS settings. The figure below shows an example of the Advanced Mode. Refer to the
following sections for the detailed configurations.
To access the EZ Mode, click Exit, then select ASUS EZ Mode.
Back button
Menu items
Menu bar
Configuration fields
General help
Submenu item
Pop-up window
Scroll bar
Navigation keys
Menu bar
The menu bar on top of the screen has the following main items:
Main
For changing the basic system configuration
For changing the overclocking settings
For changing the advanced system settings
Ai Tweaker
Advanced
Monitor
Boot
For displaying the system temperature, power status, and changing the fan settings
For changing the system boot configuration
Tool
For configuring options for special functions
Exit
For selecting the exit options and loading default settings
2-8
ASUS P8H61-M2 Series
E7361_P8H61-M2-TPM-SI R2.0_Manua8
8
5/16/12 1:44:53 PM
Menu items
The highlighted item on the menu bar displays the specific items for that menu. For example,
selecting Main shows the Main menu items.
The other items (Ai Tweaker, Advanced, Monitor, Boot, Tool, and Exit) on the menu bar have
their respective menu items.
Back button
This button appears when entering a submenu. Press <Esc> or use the USB mouse to click
this button to return to the previous menu screen.
Submenu items
A greater than sign (>) before each item on any menu screen means that the item has a
submenu. To display the submenu, select the item and press <Enter> or double-click the
item.
Pop-up window
Select a menu item and press <Enter> to display a pop-up window with the configuration
options for that item.
Scroll bar
A scroll bar appears on the right side of a menu screen when there are items that do not fit on
the screen. Press the Up/Down arrow keys or <Page Up> / <Page Down> keys to display the
other items on the screen.
Navigation keys
At the bottom right corner of the menu screen are the navigation keys for the BIOS setup
program. Use the navigation keys to select items in the menu and change the settings.
General help
At the top right corner of the menu screen is a brief description of the selected item.
Configuration fields
These fields show the values for the menu items. If an item is user-configurable, you can
change the value of the field opposite the item. You cannot select an item that is not
user-configurable.
A configurable field is highlighted when selected. To change the value of a field, select it and
press <Enter> or click on it to display a list of options.
Chapter 2: BIOS information
2-9
E7361_P8H61-M2-TPM-SI R2.0_Manua9
9
5/16/12 1:44:54 PM
2.3
Main menu
The Main menu screen appears when you enter the Advanced Mode of the BIOS Setup
program. The Main menu provides you an overview of the basic system information, and
allows you to set the system date, time, language, and security settings.
2.3.1
System Language [English]
Allows you to choose the BIOS language version from the options. Configuration options:
[English] [Français] [Español] [Deutsch] [Русский]
2.3.2
System Date [Day xx/xx/xxxx]
Allows you to set the system date.
2.3.3
System Time [xx:xx:xx]
Allows you to set the system time.
2.3.4
Security
The Security menu items allow you to change the system security settings.
•
•
If you have forgotten your BIOS password, erase the CMOS Real Time Clock (RTC)
RAM to clear the BIOS password. See section 1.9 Jumpers for information on how to
erase the RTC RAM.
The Administrator or User Password items on top of the screen show the default Not
Installed. After you set a password, these items show Installed.
2-10
ASUS P8H61-M2 Series
E7361_P8H61-M2-TPM-SI R2.0_Manua10 10
5/16/12 1:44:56 PM
Administrator Password
If you have set an administrator password, we recommend that you enter the administrator
password for accessing the system. Otherwise, you might be able to see or change only
selected fields in the BIOS setup program.
To set an administrator password:
1.
2.
3.
Select the Administrator Password item and press <Enter>.
From the Create New Password box, key in a password, then press <Enter>.
Confirm the password when prompted.
To change an administrator password:
1.
2.
Select the Administrator Password item and press <Enter>.
From the Enter Current Password box, key in the current password, then press
<Enter>.
3.
From the Create New Password box, key in a new password, then press <Enter>.
4.
Confirm the password when prompted.
To clear the administrator password, follow the same steps as in changing an administrator
password, but press <Enter> when prompted to create/confirm the password. After you clear
the password, the Administrator Password item on top of the screen shows Not Installed.
User Password
If you have set a user password, you must enter the user password for accessing the system.
The User Password item on top of the screen shows the default Not Installed. After you set
a password, this item shows Installed.
To set a user password:
1.
2.
3.
Select the User Password item and press <Enter>.
From the Create New Password box, key in a password, then press <Enter>.
Confirm the password when prompted.
To change a user password:
1.
2.
Select the User Password item and press <Enter>.
From the Enter Current Password box, key in the current password, then press
<Enter>.
3.
From the Create New Password box, key in a new password, then press <Enter>.
4.
Confirm the password when prompted.
To clear the user password, follow the same steps as in changing a user password, but press
<Enter> when prompted to create/confirm the password. After you clear the password, the
User Password item on top of the screen shows Not Installed.
Chapter 2: BIOS information
2-11
E7361_P8H61-M2-TPM-SI R2.0_Manua11 11
5/16/12 1:44:56 PM
2.4
Ai Tweaker menu
The Ai Tweaker menu items allow you to configure overclocking-related items.
Be cautious when changing the settings of the Ai Tweaker menu items. Incorrect field
values can cause the system to malfunction.
The configuration options for this section vary depending on the CPU and DIMM model you
installed on the motherboard.
2.4.1
ASUS MultiCore Enhancement [Enabled]
[Enabled]
Select this option for maximum performance under XMP/Manual/User
define memory frequency mode.
[Disabled]
Select this option for default core ratio settings.
2.4.2
Memory Frequency [Auto]
Allows you to set the memory operating frequency. Configuration options: [Auto] [DDR3-
800MHz] [DDR3-1066MHz] [DDR3-1333MHz] [DDR3-1600MHz] [DDR3-1866MHz] [DDR3-
2133MHz] [DDR3-2400MHz]
The configuration options vary with the CPU types installed on the system.
Selecting a very high memory frequency may cause the system to become unstable! If this
happens, revert to the default setting.
2.4.3
GPU Boost
GPU Boost accelerates the integrated GPU for extreme graphics performance.
Configuration options: [OK] [Cancel]
2-12
ASUS P8H61-M2 Series
E7361_P8H61-M2-TPM-SI R2.0_Manua12 12
5/16/12 1:44:59 PM
2.4.4
DRAM Timing Control
The sub-items in this menu allow you to set the DRAM timing control features. Use the <+>
and <-> keys to adjust the value. To restore the default setting, type [auto] using the keyboard
and press <Enter>.
Changing the values in this menu may cause the system to become unstable! If this
happens, revert to the default settings.
2.4.5
CPU Power Management
The sub-items in this menu allow you to set the CPU ratio and features.
CPU Ratio [Auto]
Allows you to manually adjust the maximum non-turbo CPU ratio. Use <+> and <->
keys or the numeric keypad to adjust the ratio. The valid value ranges vary according
to your CPU model.
Enhanced Intel SpeedStep Technology [Enabled]
Allows you to enable or disable the Enhanced Intel® SpeedStep Technology (EIST).
[Disabled]
[Enabled]
Disables this function.
The operating system dynamically adjusts the processor voltage and
core frequency which may result in increased average consumption
and decrease average heat production.
Turbo Mode [Enabled]
[Enabled]
Allows processor cores to run faster than marked frequency in specific
conditions.
[Disabled]
Disables this function.
The following three items appear only when you set the Turbo Mode item to [Enabled].
Long Duration Power Limit [Auto]
Allows you to limit the turbo ratio’s long duration power. Use the <+> and <-> keys to
adjust the value.
Long Duration Maintained [Auto]
Allows you to maintain the turbo ratio’s long duration power. Use the <+> and <-> keys
to adjust the value.
Short Duration Power Limit [Auto]
Allows you to limit the turbo ratio’s long duration power. Use the <+> and <-> keys to
adjust the value.
Primary Plane Current Limit [Auto]
Maximum instantaneous current allowed at any given time for CPU cores. Use <+> and
<-> key to adjust the value at 0.125A increment.
Secondary Plane Current Limit [Auto]
Maximum instantaneous current allowed at any given time for Internal Graphics cores.
Use <+> and <-> key to adjust the value at 0.125A increment.
Chapter 2: BIOS information
2-13
E7361_P8H61-M2-TPM-SI R2.0_Manua13 13
5/16/12 1:45:00 PM
2.5
Advanced menu
The Advanced menu items allow you to change the settings for the CPU and other system
devices.
Be cautious when changing the settings of the Advanced menu items. Incorrect field values
can cause the system to malfunction.
2.5.1
Trusted Computing
This item appears only when a TPM module is connected to the motherboard and allows you
to change TPM settings.
TPM Support [Disabled]
Allows you to enable or disable TPM support. Configuration options: [Disabled] [Enabled]
2.5.2
CPU Configuration
The items in this menu show the CPU-related information that the BIOS automatically
detects.
The items shown in submenu may be different due to the CPU you installed.
Intel Adaptive Thermal Monitor [Enabled]
[Enabled]
[Disabled]
Enables the overheated CPU to throttle its clock speed to cool down.
Disables the CPU thermal monitor function.
2-14
ASUS P8H61-M2 Series
E7361_P8H61-M2-TPM-SI R2.0_Manua14 14
5/16/12 1:45:02 PM
Active Processor Cores [All]
Allows you to choose the number of CPU cores to activate in each processor package.
Configuration options: [All] [1] [2] [3]
Limit CPUID Maximum [Disabled]
[Enabled]
Allows legacy operating systems to boot even without support for CPUs
with extended CPUID functions.
[Disabled]
Disables this function.
Execute Disable Bit [Enabled]
[Enabled]
Enables the No-Execution Page Protection Technology.
Forces the XD feature flag to always return to zero (0).
[Disabled]
Intel Virtualization Technology [Disabled]
[Enabled]
[Disabled]
Allows a hardware platform to run multiple operating systems separately
and simultaneously, enabling one system to virtually function as several
systems.
Disables this function.
Hardware Prefetcher [Enabled]
[Enabled]
[Disabled]
Allows a hardware platform to run multiple operating systems separately
and simultaneously, enabling one system to virtually function as several
systems.
Disables this function.
Adjacent Cache Line Prefetch [Enabled]
[Enabled]
[Disabled]
Allows a hardware platform to perform adjacent cache line prefetching.
Disables this function.
CPU Power Management Configuration
CPU Ratio [Auto]
Allows you to set the ratio between the CPU Core Clock and the BCLK Frequency. Use
<+> and <-> keys to adjust the ratio. The valid value ranges vary according to your
CPU model.
Enhanced Intel SpeedStep Technology [Enabled]
Allows you to enable or disable the Enhanced Intel® SpeedStep Technology (EIST).
[Disabled] The CPU runs at its default speed.
[Enabled] The operating system controls the CPU speed.
Turbo Mode [Enabled]
Allows you to enable or disable the Intel® Turbo Mode Technology.
[Enabled] Allows processor cores to run faster than marked frequency in specific
condition.
[Disabled] Disables this function.
CPU C1E [Auto]
Enables or disables the C1E support function. This item should be enabled in order to
enable the Enhanced Halt State. Configuration options: [Auto] [Enabled] [Disabled]
Chapter 2: BIOS information
2-15
E7361_P8H61-M2-TPM-SI R2.0_Manua15 15
5/16/12 1:45:03 PM
CPU C3 Report [Auto]
Allows you to disable or enable the CPU C3 report to OS. Configuration options: [Auto]
[Enabled] [Disabled]
CPU C6 Report [Auto]
Allows you to disable or enable the CPU C6 report to OS. Configuration options: [Auto]
[Enabled] [Disabled]
2.5.3
PCH Configuration
High Precision Timer [Enabled]
Allows you to enable or disable the High Precision Event Timer.
Configuration options: [Enabled] [Disabled]
Intel(R) Rapid Start Technology
Intel(R) Rapid Start Technology [Disabled]
Allows you to enable or disable the Intel(R) Rapid Start Technology. Configuration options:
[Enabled] [Disabled]
The following three items appear only when you set the Intel(R) Rapid Start Technology
to [Enabled].
Entry on S3 RTC Wake [Enabled]
Allows you to enable or disable the iFFS invocation upon S3 RTC wake. Configuration
options: [Enabled] [Disabled]
Entry After [10 Minutes]
This item appears only when you set the Entry on S3 RTC Wake to [Enabled] and
allows you to set the RTC wake timer at S3 entry. Configuration options: [Immediately]
[1 minute] [2 minutes] [5 minutes] [10 minutes] [15 minutes] [30 minutes] [1 hour] [2
hours]
Active Page Threshold Support [Disbaled]
Allows you to enable or disable the Active Page Threshold Support. Configuration
options: [Enabled] [Disabled]
Active Memory Threshold [x]
This item appears only when you set the Active Page Threshold Support to
[Enabled] and allows you to set the Active Memory Threshold. When the partition size
is larger than the Active Page Threshold size, the system will try to support the Intel(R)
Rapid Start Technology. When the item is set to zero, the system automatically checks
whether the partition size is enough at S3 entry. Key in the desired value using the
numeric keypad.
Intel(R) Smart Connect Technology
ISCT Configuration [Disabled]
Allows you to enable or disable the ISCT configuration. Configuration options: [Enabled]
[Disabled]
2-16
ASUS P8H61-M2 Series
E7361_P8H61-M2-TPM-SI R2.0_Manua16 16
5/16/12 1:45:03 PM
2.5.4
SATA Configuration
While entering Setup, the BIOS automatically detects the presence of SATA devices. The
SATA Port items show Empty if no SATA device is installed to the corresponding SATA port.
SATA Mode Selection [IDE]
Allows you to set the SATA configuration.
[Disabled]
[IDE]
Disables the SATA function.
Set to [IDE] when you want to use the Serial ATA hard disk drives as
Parallel ATA physical storage devices.
[AHCI]
Set to [AHCI] when you want the SATA hard disk drives to use the AHCI
(Advanced Host Controller Interface). The AHCI allows the onboard storage
driver to enable advanced Serial ATA features that increases storage
performance on random workloads by allowing the drive to internally
optimize the order of commands.
•
•
Due to H61 Chipset limitation, AHCI Mode only works on Windows® Vista / Windows® 7.
Please use IDE Mode on Windows® XP.
[IDE] is the default SATA type. Under Windows® XP, there is no need to change the
SATA type.
S.M.A.R.T. Status Check [Enabled]
S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) is a monitor system. When
read/write of your hard disk errors occur, this feature allows the hard disk to report warning
messages during the POST. Configuration options: [Enabled] [Disabled]
Hot Plug [Disabled]
This item only appears when you set the SATA Mode Selection item to [AHCI] and allows you
to enable or disable the hot-plug support for each SATA port. Configuration options: [Enabled]
[Disabled]
2.5.5
System Agent Configuration
Memory Remap Feature [Enabled]
[Enabled]
[Disabled]
Allow you to enable remapping the memory above 4GB.
Disables this function.
Graphics Configuration
Primary Display [Auto]
Allows you to decide which graphics controller to use as the primary boot device.
Configuration options: [Auto] [iGPU] [PCIE] [PCI]
iGPU Memory [Auto]
Allows you to set the iGPU memory size. Configuration options: [Auto] [32M] [64M]
[96M] [128M] ~ [448M] [480M] [512M] [1024M]
Render Standby [Enabled]
Allows you to enable or disable Render Standby by internal graphics devices.
Configuration options: [Disabled] [Enabled]
Chapter 2: BIOS information
2-17
E7361_P8H61-M2-TPM-SI R2.0_Manua17 17
5/16/12 1:45:03 PM
iGPU Multi-Monitor [Disabled]
Allows you to enable or disable the Lucid Virtu support for both the integrated and
discrete graphics. The iGPU shared memory size will be fixed at 64MB. Configuration
options: [Disabled] [Enabled]
2.5.6
USB Configuration
The items in this menu allow you to change the USB-related features.
The USB Devices item shows the auto-detected values. If no USB device is detected, the
item shows None.
Legacy USB Support [Enabled]
[Enabled]
[Disabled]
[Auto]
Enables the support for USB devices on legacy operating systems (OS).
The USB devices can be used only for the BIOS setup program.
Allows the system to detect the presence of USB devices at startup. If
detected, the USB controller legacy mode is enabled. If no USB device is
detected, the legacy USB support is disabled.
EHCI Hand-off [Disabled]
[Enabled]
Enables the support for operating systems without an EHCI hand-off
feature.
[Disabled]
Disables the function.
2.5.7
Onboard Devices Configuration
HD Audio Controller [Enabled]
[Enabled]
Enables the High Definition Audio Controller.
[Disabled]
Disables the controller.
The following item appears only when you set the HD Audio Controller item to [Enabled].
Front Panel Type [HD]
Allows you to set the front panel audio connector (AAFP) mode to legacy AC’97 or high-
definition audio depending on the audio standard that the front panel audio module supports.
[HD]
Sets the front panel audio connector (AAFP) mode to high definition audio.
[AC97]
Sets the front panel audio connector (AAFP) mode to legacy AC’97
Realtek LAN Controller [Enabled]
[Enabled] Enables the Realtek LAN controller.
[Disabled] Disables the controller.
Realtek PXE OPROM [Disabled]
This item appears only when you set the Realtek LAN Controller item to [Enabled] and
allows you to enable or disable the Rom Help of the Realtek LAN controller. Configuration
options: [Enabled] [Disabled]
2-18
ASUS P8H61-M2 Series
E7361_P8H61-M2-TPM-SI R2.0_Manua18 18
5/16/12 1:45:04 PM
Serial Port Configuration
The sub-items in this menu allow you to set the serial port configuration.
Serial Port [Enabled]
Allows you to enable or disable the serial port (COM).
Configuration options: [Enabled] [Disabled]
Change Settings [IO=3F8h; IRQ=4]
Allows you to select the Serial Port base address. Configuration options: [IO=3F8h;
IRQ=4] [IO=2F8h; IRQ=3] [IO=3E8h; IRQ=4] [IO=2E8h; IRQ=3]
Parallel Port Configuration
The sub-items in this menu allow you to set the parallel port configuration.
Parallel Port [Enabled]
Allows you to enable or disable the parallel port (LPT).
Configuration options: [Enabled] [Disabled]
Change Settings [Auto]
Allows you to select the Parallel Port base address. Configuration options: [Auto]
[IO=378h; IRQ=5] [IO=378h; IRQ=5,6,7,9,10,11,12] [IO=278h; IRQ=5,6,7,9,10,11,12]
[IO=3BCh; IRQ= 5,6,7,9,10,11,12]
Device Mode [STD Printer Mode]
Allows you to change the printer port mode. Configuration options: [STD Printer Mode]
[SPP Mode] [EPP-1.9 and SPP Mode] [EPP-1.7 and SPP Mode] [ECP Mode] [ECP and
EPP 1.9 Mode] [ECP and EPP 1.7 Mode]
2.5.8
APM
Restore AC Power Loss [Power Off]
[Power On]
[Power Off]
[Last State]
The system goes into on state after an AC power loss.
The system goes into off state after an AC power loss.
The system goes into either off or on state, whatever the system state was
before the AC power loss.
Power On By PS/2 Keyboard [Disabled]
[Disabled]
[Space Bar]
[Ctrl-Esc]
Disables the Power On by a PS/2 keyboard.
Sets the Space Bar on the PS/2 keyboard to turn on the system.
Sets the Ctrl+Esc key on the PS/2 keyboard to turn on the system.
[Power Key]
Sets Power key on the PS/2 keyboard to turn on the system. This feature
requires an ATX power supply that provides at least 1A on the +5VSB lead.
Power On By PCI [Disabled]
[Disabled]
[Enabled]
Disables the PCI devices to generate a wake event.
Enables the PCI devices to generate a wake event.
Power On By PCIE [Disabled]
[Disabled]
[Enabled]
Disables the PCIE devices to generate a wake event.
Enables the PCIE devices to generate a wake event.
Chapter 2: BIOS information
2-19
E7361_P8H61-M2-TPM-SI R2.0_Manua19 19
5/16/12 1:45:04 PM
Power On By Ring [Disabled]
[Disabled]
[Enabled]
Disables Ring to generate a wake event.
Enables Ring to generate a wake event.
Power On By RTC [Disabled]
[Disabled]
[Enabled]
Disables RTC to generate a wake event.
When set to [Enabled], the items RTC Alarm Date (Days) and Hour/
Minute/Second will become user-configurable with set values.
2.5.9
Network Stack
Network Stack [Disable Link]
This item allows user to disable or enable the UEFI network stack. Configuration options:
[Disable Link] [Enabled]
Ipv4 PXE Support [Enabled]
This item appears only when you set the Network Stack item to [Enabled]. When this item is
disabled, the IPV4 PXE boot option will not be created. Configuration options: [Disable Link]
[Enabled]
Ipv6 PXE Support [Enabled]
This item appears only when you set the Network Stack item to [Enabled]. When this item is
disabled, the IPV6 PXE boot option will not be created. Configuration options: [Disable Link]
[Enabled]
2-20
ASUS P8H61-M2 Series
E7361_P8H61-M2-TPM-SI R2.0_Manua20 20
5/16/12 1:45:04 PM
2.6
Monitor menu
The Monitor menu displays the system temperature/power status, and allows you to change
the fan settings.
Scroll down to display the following items:
2.6.1
CPU Temperature / MB Temperature [xxx�C/xxx�F]
The onboard hardware monitor automatically detects and displays the CPU and motherboard
temperatures. Select Ignore if you do not wish to display the detected temperatures.
2.6.2
CPU / Chassis Fan Speed [xxxx RPM] or [Ignore] / [N/A]
The onboard hardware monitor automatically detects and displays the CPU and chassis fan
speeds in rotations per minute (RPM). If the fan is not connected to the motherboard, the field
shows N/A. Select Ignore if you do not wish to display the detected speed.
2.6.3
CPU Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage
The onboard hardware monitor automatically detects the voltage output through the onboard
voltage regulators. Select Ignore if you do not want to detect this item.
Chapter 2: BIOS information
2-21
E7361_P8H61-M2-TPM-SI R2.0_Manua21 21
5/16/12 1:45:06 PM
2.6.4
CPU Q-Fan Control [Enabled]
Disables the CPU Q-Fan control feature.
Enables the CPU Q-Fan control feature.
[Disabled]
[Enabled]
CPU Fan Speed Low Limit [200 RPM]
This item appears only when you enable the CPU Q-Fan Control feature and allows
you to disable or set the CPU fan warning speed.
Configuration options: [Ignore] [100 RPM] [200RPM] [300 RPM] [400 RPM] [500 RPM]
CPU Fan Profile [Standard]
This item appears only when you enable the CPU Q-Fan Control feature and allows
you to set the appropriate performance level of the CPU fan.
[Standard] Sets to [Standard] to make the CPU fan automatically adjust depending on
the CPU temperature.
[Silent]
[Turbo]
[Manual]
Sets to [Silent] to minimize the fan speed for quiet CPU fan operation.
Sets to [Turbo] to achieve maximum CPU fan speed.
Sets to [Manual] to assign detailed fan speed control parameters.
The following four items appear only when you set CPU Fan Profile to [Manual].
CPU Upper Temperature [70�C]
Use the <+> and <-> keys to adjust the upper limit of the CPU temperature. The values range
from 20ºC to 75ºC.
CPU Fan Max. Duty Cycle(%) [100%]
Use the <+> and <-> keys to adjust the maximum CPU fan duty cycle. The values range from
20% to 100%. When the CPU temperature reaches the upper limit, the CPU fan will operate at
the maximum duty cycle.
CPU Lower Temperature [20�C]
Use the <+> and <-> keys to adjust the lower limit of the CPU temperature. The values range
from 20ºC to 75ºC
CPU Fan Min. Duty Cycle(%) [20%]
Use the <+> and <-> keys to adjust the minimum CPU fan duty cycle. The values range from 0%
to 100%. When the CPU / Chassis temperature is under the lower limit, the CPU fan will operate
at the minimum duty cycle.
2.6.5
Chassis Q-Fan Control [Enabled]
[Disabled]
[Enabled]
Disables the Chassis Q-Fan control feature.
Enables the Chassis Q-Fan control feature.
Chassis Fan Speed Low Limit [600 RPM]
This item appears only when you enable the Chassis Q-Fan Control feature and
allows you to disable or set the chassis fan warning speed.
Configuration options: [Ignore] [200RPM] [300 RPM] [400 RPM] [500 RPM] [600 RPM]
2-22
ASUS P8H61-M2 Series
E7361_P8H61-M2-TPM-SI R2.0_Manua22 22
5/16/12 1:45:06 PM
Chassis Fan Profile [Standard]
This item appears only when you enable the Chassis Q-Fan Control feature and
allows you to set the appropriate performance level of the chassis fan.
[Standard] Sets to [Standard] to make the chassis fan automatically adjust depending
on the chassis temperature.
[Silent]
[Turbo]
[Manual]
Sets to [Silent] to minimize the fan speed for quiet chassis fan operation.
Sets to [Turbo] to achieve maximum chassis fan speed.
Sets to [Manual] to assign detailed fan speed control parameters.
The following four items appear only when you set Chassis Fan Profile to [Manual].
Chassis Upper Temperature [70�C]
Use the <+> and <-> keys to adjust the upper limit of the CPU temperature. The values range
from 40ºC to 90ºC.
Chassis Fan Max. Duty Cycle(%) [100%]
Use the <+> and <-> keys to adjust the maximum chassis fan duty cycle. The values range
from 60% to 100%. When the chassis temperature reaches the upper limit, the chassis fan will
operate at the maximum duty cycle.
Chassis Lower Temperature [40�C]
Displays the lower limit of the chassis temperature.
CPU Fan Min. Duty Cycle(%) [60%]
Use the <+> and <-> keys to adjust the minimum chassis fan duty cycle. The values range from
60% to 100%. When the chassis temperature is under 40ºC, the chassis fan will operate at the
minimum duty cycle.
2.6.6
Anti Surge Support [Enabled]
This item allows you to enable or disable the Anti Surge function.
Configuration options: [Disabled] [Enabled]
Chapter 2: BIOS information
2-23
E7361_P8H61-M2-TPM-SI R2.0_Manua23 23
5/16/12 1:45:07 PM
2.7
Boot menu
The Boot menu items allow you to change the system boot options.
Exit
UEFI BIOS Utility - Advanced Mode
Main
Ai Tweaker
Advanced
Monitor
Boot
Tool
Select the keyboard NumLock state
Bootup NumLock State
Full Screen Logo
On
Enabled
Enabled
Wait For ‘F1’ If Error
Option ROM Messages
Setup Mode
Force BIOS
EZ Mode
UEFI/Legacy Boot
PCI ROM Priority
Enabled both...
Legacy ROM
Boot Option Priorities
Boot Option #1
SATA: xxxxxxx
SATA: xxxxxxx
→←: Select Screen
↑↓: Select Item
Enter: Select
Boot Option #2
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Shortcut
Boot Override
>
>
>
SATA: xxxxxxxxxxxx
F5: Optimized Defaults
F10: Save ESC: Exit
F12: Print Screen
Hard Drive BBS Priorities
CD/DVD ROM Drive BBS Priorities
Version 2.10.1208. Copyright (C) 2012 American Megatrends, Inc.
2.7.1
[On]
Bootup NumLock State [On]
Sets the power-on state of the NumLock to [On].
Sets the power-on state of the NumLock to [Off].
[Off]
2.7.2
Full Screen Logo [Enabled]
[Enabled]
[Disabled]
Enables the full screen logo display feature.
Disables the full screen logo display feature.
Set this item to [Enabled] to use the ASUS MyLogo 2™ feature.
Post Report [5 sec]
This item appears only when the Full Screen Logo item is set to [Disabled] and allows you to
set the waiting time for the system to display the post report. Configuration options: [1 sec] [2
sec] [3 sec] [4 sec] [5 sec] [6 sec] [7 sec] [8 sec] [9 sec] [10 sec] [Until Press ESC]
2.7.3
Wait for ‘F1’ If Error [Enabled]
When this item is set to [Enabled], the system waits for the F1 key to be pressed when error
occurs. Configuration options: [Disabled] [Enabled]
2-24
ASUS P8H61-M2 Series
E7361_P8H61-M2-TPM-SI R2.0_Manua24 24
5/16/12 1:45:08 PM
2.7.4
Option ROM Messages [Force BIOS]
[Force BIOS]
The third-party ROM messages will be forced to display during the boot
sequence.
[Keep Current] The third-party ROM messages will be displayed only if the third-party
manufacturer had set the add-on device to do so.
2.7.5
Setup Mode [EZ Mode]
[Advanced Mode] Sets Advanced Mode as the default screen for entering the BIOS setup
program.
[EZ Mode]
Sets EZ Mode as the default screen for entering the BIOS setup program.
2.7.6
UEFI/Legacy Boot [Enabled both UEFI and Legacy]
[Enable both UEFI and Legacy] Enables both UEFI and Legacy boot.
[Disable UEFI]
Enables the Legacy boot, and disables the UEFI boot.
Enables the UEFI boot, and disables the Legacy boot.
[Disable Legacy]
2.7.7
PCI ROM Priority [Legacy ROM]
[Legacy ROM]
Launch Legacy ROM
[EFI Compatibe ROM] Launch UEFI Compatible ROM
2.7.8
Boot Option Priorities
These items specify the boot device priority sequence from the available devices. The
number of device items that appears on the screen depends on the number of devices
installed in the system.
•
•
To select the boot device during system startup, press <F8> when ASUS Logo appears.
To access Windows OS in Safe Mode, press <F8> after POST.
2.7.9
Boot Override
These items displays the available devices. The number of device items that appears on
the screen depends on the number of devices installed in the system. Click an item to start
booting from the selected device.
Chapter 2: BIOS information
2-25
E7361_P8H61-M2-TPM-SI R2.0_Manua25 25
5/16/12 1:45:08 PM
2.8
Tools menu
The Tools menu items allow you to configure options for special functions. Select an item
then press <Enter> to display the submenu.
Exit
EFI BIOS Utility - Advanced Mode
Main
Ai Tweaker
Advanced
Monitor
Boot
Tool
Be used to update BIOS
>
>
>
ASUS EZ Flash 2 Utility
ASUS SPD Information
ASUS O.C. Profile
2.8.1
ASUS EZ Flash 2 Utility
Allows you to run ASUS EZ Flash 2. Press [Enter] to launch the ASUS EZ Flash 2 screen.
For more details, refer to section 2.1.2 ASUS EZ Flash 2.
2.8.2
ASUS SPD Information
DIMM Slot # [DIMM_A1]
Displays the Serial Presence Detect (SPD) information of the DIMM module installed on the
selected slot. Configuration options: [DIMM_A1] [DIMM_A2] [DIMM_B1] [DIMM_B2]
2.8.3
ASUS O.C. Profile
This item allows you to store or load multiple BIOS settings.
The Setup Profile Status items show Not Installed if no profile is created.
Label
Allows you to input the label of the setup profile.
Save to Profile
Allows you to save the current BIOS settings to the BIOS Flash, and create a profile. Key in a
profile number from one to eight, press <Enter>, and then select Yes.
Load from Profile
Allows you to load the previous BIOS settings saved in the BIOS Flash. Key in the profile
number that saved your CMOS settings, press <Enter>, and then select Yes.
•
DO NOT shut down or reset the system while updating the BIOS to prevent the system
boot failure!
•
We recommend that you update the BIOS file only coming from the same memory/CPU
configuration and BIOS version.
2-26
ASUS P8H61-M2 Series
E7361_P8H61-M2-TPM-SI R2.0_Manua26 26
5/16/12 1:45:09 PM
2.9
Exit menu
The Exit menu items allow you to load the optimal default values for the BIOS items, and
save or discard your changes to the BIOS items. You can access the EZ Mode from the Exit
menu.
Exit
Load Optimized Defaults
Save Changes & Reset
Discard Changes & Exit
ASUS EZ Mode
Launch EFI Shell from filesystem device
Load Optimized Defaults
This option allows you to load the default values for each of the parameters on the Setup
menus. When you select this option or if you press <F5>, a confirmation window appears.
Select Yes to load the default values.
Save Changes & Reset
Once you are finished making your selections, choose this option from the Exit menu to
ensure the values you selected are saved. When you select this option or if you press <F10>,
a confirmation window appears. Select Yes to save changes and exit.
Discard Changes & Exit
This option allows you to exit the Setup program without saving your changes. When you
select this option or if you press <Esc>, a confirmation window appears. Select Yes to
discard changes and exit.
ASUS EZ Mode
This option allows you to enter the EZ Mode screen.
Launch EFI Shell from filesystem device
This option allows you to attempt to launch the EFI Shell application (shellx64.efi) from one of
the available filesystem devices.
Chapter 2: BIOS information
2-27
E7361_P8H61-M2-TPM-SI R2.0_Manua27 27
5/16/12 1:45:10 PM
2-28
ASUS P8H61-M2 Series
E7361_P8H61-M2-TPM-SI R2.0_Manua28 28
5/16/12 1:45:10 PM
Appendices
Notices
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
•
•
This device may not cause harmful interference.
This device must accept any interference received including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with manufacturer’s instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is
connected.
•
Consult the dealer or an experienced radio/TV technician for help.
The use of shielded cables for connection of the monitor to the graphics card is required
to assure compliance with FCC regulations. Changes or modifications to this unit not
expressly approved by the party responsible for compliance could void the user’s authority
to operate this equipment.
IC: Canadian Compliance Statement
Complies with the Canadian ICES-003 Class B specifications. This device complies with RSS
210 of Industry Canada. This Class B device meets all the requirements of the Canadian
interference-causing equipment regulations.
This device complies with Industry Canada license exempt RSS standard(s). Operation is
subject to the following two conditions: (1) this device may not cause interference, and (2)
this device must accept any interference, including interference that may cause undesired
operation of the device.
Cut appareil numérique de la Classe B est conforme à la norme NMB-003 du Canada.
Cet appareil numérique de la Classe B respecte toutes les exigences du Règlement sur le
matériel brouilleur du Canada.
Cet appareil est conforme aux normes CNR exemptes de licence d’Industrie Canada. Le
fonctionnement est soumis aux deux conditions suivantes :
(1) cet appareil ne doit pas provoquer d’interférences et
(2) cet appareil doit accepter toute interférence, y compris celles susceptibles de provoquer
un fonctionnement non souhaité de l’appareil.
Appendices
A-1
E7361_P8H61-M2-TPM-SI R2.0_Manua1
1
5/16/12 1:45:11 PM
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio noise emissions from
digital apparatus set out in the Radio Interference Regulations of the Canadian Department
of Communications.
This class B digital apparatus complies with Canadian ICES-003.
VCCI: Japan Compliance Statement
VCCI Class B Statement
KC: Korea Warning Statement
REACH
Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of
Chemicals) regulatory framework, we published the chemical substances in our products at
DO NOT throw the motherboard in municipal waste. This product has been designed to
enable proper reuse of parts and recycling. This symbol of the crossed out wheeled bin
indicates that the product (electrical and electronic equipment) should not be placed in
municipal waste. Check local regulations for disposal of electronic products.
DO NOT throw the mercury-containing button cell battery in municipal waste. This symbol
of the crossed out wheeled bin indicates that the battery should not be placed in municipal
waste.
ASUS Recycling/Takeback Services
ASUS recycling and takeback programs come from our commitment to the highest standards for
protecting our environment. We believe in providing solutions for you to be able to responsibly
recycle our products, batteries, other components as well as the packaging materials. Please
regions.
A-2
ASUS P8H61-M2/TPM/SI R2.0
E7361_P8H61-M2-TPM-SI R2.0_Manua2
2
5/16/12 1:45:12 PM
ASUS contact information
ASUSTeK COMPUTER INC.
Address
Telephone
Fax
E-mail
Web site
15 Li-Te Road, Peitou, Taipei, Taiwan 11259
+886-2-2894-3447
+886-2-2890-7798
Technical Support
Telephone
Online support
+86-21-38429911
support.asus.com
ASUS COMPUTER INTERNATIONAL (America)
Address
Telephone
Fax
800 Corporate Way, Fremont, CA 94539, USA
+1-510-739-3777
+1-510-608-4555
usa.asus.com
Web site
Technical Support
Telephone
Support fax
+1-812-282-2787
+1-812-284-0883
support.asus.com
Online support
ASUS COMPUTER GmbH (Germany and Austria)
Address
Harkort Str. 21-23, D-40880 Ratingen, Germany
Fax
Web site
Online contact
+49-2102-959911
Technical Support
Telephone
Support Fax
+49-1805-010923*
+49-2102-9599-11
support.asus.com
Online support
* EUR 0.14/minute from a German fixed landline; EUR 0.42/minute from a mobile phone.
E7361_P8H61-M2-TPM-SI R2.0_Manua2
2
5/16/12 1:45:12 PM
E7361_P8H61-M2-TPM-SI R2.0_Manua3
3
5/16/12 1:45:13 PM
|