Striker
Contents
Notices........................................................................................................ vii
Safety information .................................................................................... viii
About this guide ......................................................................................... ix
Striker specifications summary ................................................................ xi
Chapter 1:
Product introduction
1.1
1.2
1.3
Welcome! ...................................................................................... 1-1
Package contents......................................................................... 1-1
Special features............................................................................ 1-2
1.3.1
1.3.2
Product highlights ........................................................... 1-2
ASUS ROG unique features .......................................... 1-4
Chapter 2:
Hardware information
2.1
2.2
Before you proceed ..................................................................... 2-1
Motherboard overview................................................................. 2-2
2.2.1
2.2.2
2.2.3
2.2.4
2.2.5
Placement direction ........................................................ 2-2
Screw holes .................................................................... 2-2
ASUS Stack Cool 2......................................................... 2-3
Motherboard layout......................................................... 2-4
Layout contents............................................................... 2-5
2.3
2.4
2.5
Central Processing Unit (CPU) ................................................... 2-7
2.3.1
2.3.2
2.3.3
2.3.4
Installing the CPU ........................................................... 2-8
Installing the CPU heatsink and fan.............................. 2-10
Uninstalling the CPU heatsink and fan ......................... 2-12
Installing the optional fan .............................................. 2-14
System memory ......................................................................... 2-15
2.4.1
2.4.2
2.4.3
2.4.4
Overview....................................................................... 2-15
Memory configurations.................................................. 2-16
Installing a DIMM .......................................................... 2-17
Removing a DIMM ........................................................ 2-17
Expansion slots.......................................................................... 2-18
2.5.1
2.5.2
2.5.3
2.5.4
Installing an expansion card ......................................... 2-18
Configuring an expansion card ..................................... 2-18
Interrupt assignments ................................................... 2-19
PCI slots........................................................................ 2-20
iii
Contents
2.5.5
2.5.6
PCI Express x1 slot....................................................... 2-20
PCI Express x16 slots................................................... 2-20
2.6
2.7
2.8
Jumper ........................................................................................ 2-21
Audio Card Installation.............................................................. 2-22
Connectors ................................................................................. 2-23
2.8.1
2.8.2
2.8.3
Rear panel connectors.................................................. 2-23
Internal connectors ....................................................... 2-26
Onboard switches ......................................................... 2-38
Chapter 3:
Powering up
3.1
Starting up for the first time........................................................ 3-1
3.2
Turning off the computer............................................................. 3-2
3.2.1
3.2.2
Using the OS shut down function.................................... 3-2
Using the dual function power switch.............................. 3-2
Chapter 4:
4.1
BIOS setup
Managing and updating your BIOS ............................................ 4-1
4.1.1
4.1.2
4.1.3
4.1.4
4.1.5
4.1.6
ASUS Update utility ........................................................ 4-1
Creating a bootable floppy disk....................................... 4-4
ASUS EZ Flash 2 utility................................................... 4-5
Updating the BIOS.......................................................... 4-6
Saving the current BIOS file............................................ 4-8
ASUS CrashFree BIOS 2 utility ...................................... 4-9
4.2
BIOS setup program .................................................................. 4-10
4.2.1
4.2.2
4.2.3
4.2.4
4.2.5
4.2.6
4.2.7
4.2.8
BIOS menu screen.........................................................4-11
Menu bar........................................................................4-11
Legend bar.................................................................... 4-12
Menu items ................................................................... 4-12
Sub-menu items............................................................ 4-12
Configuration fields ....................................................... 4-12
Pop-up window ............................................................. 4-13
General help ................................................................. 4-13
4.3
Main menu .................................................................................. 4-14
4.3.1
4.3.2
4.3.3
System Time ................................................................. 4-14
System Date ................................................................. 4-14
Language...................................................................... 4-14
iv
Contents
4.3.4
4.3.5
4.3.6
4.3.7
4.3.8
4.3.9
Legacy Diskette A ......................................................... 4-14
Primary IDE Master/Slave............................................. 4-15
SATA1/2/3/4/5/6..............................................................................4-17
HDD SMART Monitoring............................................... 4-18
Installed Memory........................................................... 4-18
Usable Memory............................................................. 4-18
4.4
Extreme Tweaker menu ............................................................. 4-19
4.4.1
4.4.2
4.4.3
4.4.4
4.4.5
4.4.6
AI Tuning [Auto] ............................................................ 4-19
Overclocking ................................................................. 4-22
Over Voltage ................................................................. 4-24
NVIDIA GPU Ex ............................................................ 4-25
SLI-Ready Memory....................................................... 4-25
SLI-Ready Memory CPUOC......................................... 4-25
4.5
4.6
Advanced menu ......................................................................... 4-26
4.5.1
4.5.2
4.5.3
AI NET2 ........................................................................ 4-26
PCIPnP ......................................................................... 4-27
Onboard Device Configuration...................................... 4-28
Power menu................................................................................ 4-31
4.6.1
4.6.2
4.6.3
4.6.4
ACPI Suspend Type...................................................... 4-31
ACPI APIC Support....................................................... 4-31
APM Configuration........................................................ 4-32
Hardware Monitor ......................................................... 4-34
4.7
Boot menu .................................................................................. 4-38
4.7.1
4.7.2
4.7.3
4.7.4
4.7.5
4.7.6
Boot Device Priority ...................................................... 4-38
Removable Drives......................................................... 4-39
Hard Disk Drives........................................................... 4-39
CDROM Drives ............................................................. 4-39
Boot Settings Configuration ......................................... 4-40
Security......................................................................... 4-41
4.8
4.9
Tools menu ................................................................................. 4-43
4.8.1
4.8.2
4.8.3
ASUS Music Alarm........................................................ 4-43
ASUS O.C. Profile......................................................... 4-44
ASUS EZ Flash 2.......................................................... 4-46
Exit menu.................................................................................... 4-47
v
Contents
Chapter 5:
Software support
5.1
5.2
Installing an operating system ................................................... 5-1
Support DVD information............................................................ 5-1
5.2.1
5.2.2
5.2.3
5.2.4
5.2.5
5.2.6
5.2.7
Running the support DVD............................................... 5-1
Drivers menu................................................................... 5-2
Utilities menu .................................................................. 5-3
Make Disk menu ............................................................. 5-5
Manuals menu ................................................................ 5-6
ASUS Contact information.............................................. 5-6
Other information ............................................................ 5-7
5.3
Software information ................................................................... 5-9
5.3.1
5.3.2
5.3.3
5.3.4
5.3.5
ASUS MyLogo3™........................................................... 5-9
SoundMAX® High Definition Audio utility........................5-11
ASUS PC Probe II......................................................... 5-16
ASUS Music Alarm........................................................ 5-22
ASUS Ai Booster........................................................... 5-25
5.4
RAID configurations .................................................................. 5-26
5.4.1
RAID definitions ............................................................ 5-26
5.4.2
NVIDIA® RAID configurations........................................ 5-27
5.5
Creating a RAID driver disk....................................................... 5-34
Chapter 6:
NVIDIA® SLI™ technology support
6.1
6.2
Overview ....................................................................................... 6-1
Dual graphics card setup ............................................................ 6-2
6.2.1
6.2.2
6.2.3
Installing SLI-ready graphics cards................................. 6-2
Installing the device drivers............................................. 6-5
Enabling the multi-GPU feature in Windows® ................. 6-5
vi
Notices
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
•
•
This device may not cause harmful interference, and
This device must accept any interference received including interference that
may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with manufacturer’s
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to which the
receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
The use of shielded cables for connection of the monitor to the graphics card is
required to assure compliance with FCC regulations. Changes or modifications
to this unit not expressly approved by the party responsible for compliance
could void the user’s authority to operate this equipment.
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio noise emissions
from digital apparatus set out in the Radio Interference Regulations of the
Canadian Department of Communications.
This class B digital apparatus complies with Canadian ICES-003.
vii
Safety information
Electrical safety
•
To prevent electrical shock hazard, disconnect the power cable from the
electrical outlet before relocating the system.
•
When adding or removing devices to or from the system, ensure that the
power cables for the devices are unplugged before the signal cables are
connected. If possible, disconnect all power cables from the existing system
before you add a device.
•
•
•
Before connecting or removing signal cables from the motherboard, ensure
that all power cables are unplugged.
Seek professional assistance before using an adapter or extension cord.
These devices could interrupt the grounding circuit.
Make sure that your power supply is set to the correct voltage in your area.
If you are not sure about the voltage of the electrical outlet you are using,
contact your local power company.
•
If the power supply is broken, do not try to fix it by yourself. Contact a
qualified service technician or your retailer.
Operation safety
•
Before installing the motherboard and adding devices on it, carefully read all
the manuals that came with the package.
•
Before using the product, make sure all cables are correctly connected and the
power cables are not damaged. If you detect any damage, contact your dealer
immediately.
•
•
To avoid short circuits, keep paper clips, screws, and staples away from
connectors, slots, sockets and circuitry.
Avoid dust, humidity, and temperature extremes. Do not place the product in
any area where it may become wet.
•
•
Place the product on a stable surface.
If you encounter technical problems with the product, contact a qualified
service technician or your retailer.
This symbol of the crossed out wheeled bin indicates that the product (electrical
and electronic equipment) should not be placed in municipal waste. Check local
regulations for disposal of electronic products.
viii
About this guide
This user guide contains the information you need when installing and configuring
the motherboard.
How this guide is organized
This guide contains the following parts:
•
Chapter 1: Product introduction
This chapter describes the features of the motherboard and the new
technology it supports.
•
Chapter 2: Hardware information
This chapter lists the hardware setup procedures that you have to perform
when installing system components. It includes description of the jumpers
and connectors on the motherboard.
•
•
•
•
Chapter 3: Powering up
This chapter describes the power up sequence and ways of shutting down
the system.
Chapter 4: BIOS setup
This chapter tells how to change system settings through the BIOS Setup
menus. Descriptions of the BIOS items are also provided.
Chapter 5: Software support
This chapter describes the contents of the support DVD that comes with the
motherboard package.
Chapter 6: NVIDIA® SLI™ technology support
This chapter tells how to install SLI-ready PCI Express graphics cards.
Where to find more information
Refer to the following sources for additional information and for product and
software updates.
1.
2.
ASUS websites
The ASUS website provides updated information on ASUS hardware and
software products. Refer to the ASUS contact information.
Optional documentation
Your product package may include optional documentation, such as warranty
flyers, that may have been added by your dealer. These documents are not
part of the standard package.
ix
Conventions used in this guide
To make sure that you perform certain tasks properly, take note of the following
symbols used throughout this manual.
DANGER/WARNING: Information to prevent injury to yourself
when trying to complete a task.
CAUTION: Information to prevent damage to the components
when trying to complete a task.
IMPORTANT: Instructions that you MUST follow to complete a
task.
NOTE: Tips and additional information to help you complete a
task.
Typography
Bold text
Italics
Indicates a menu or an item to select.
Used to emphasize a word or a phrase.
<Key>
Keys enclosed in the less-than and greater-than sign
means that you must press the enclosed key.
Example: <Enter> means that you must press the
Enter or Return key.
<Key1+Key2+Key3>
If you must press two or more keys simultaneously, the
key names are linked with a plus sign (+).
Example: <Ctrl+Alt+D>
Command
Means that you must type the command exactly
as shown, then supply the required item or value
enclosed in brackets.
Example: At the DOS prompt, type the command line:
format A:/S
x
Striker specifications summary
CPU
LGA775 socket for Intel® Core™2 Extreme / Core™2
Duo / Pentium® Extreme / Pentium® D / Pentium® 4 /
Celeron® D Processors
Intel® Quad-core CPU Ready
Compatible with Intel® 06/05B/05A processors
Note: Visit the ASUS website at www.asus.com for the Intel® CPU support
list.
Chipset
NVIDIA® nForce 680i SLI
-
Supports SLI-Ready Memory Technology
Front Side Bus
Memory
1333** / 1066 / 800 / 533 MHz
Dual-channel memory architecture
-
4 x 240-pin DIMM sockets support non-ECC
unbuffered DDR2 800/667/533 MHz memory modules
Supports up to 8 GB system memory
-
Note: Visit the ASUS website at www.asus.com for the latest Qualified
Vendors List (QVL).
SLI-Ready Memory
Expansion slots
1200 MHz
2 x PCI Express™ x16 slots support NVIDIA®
SLI™ technology at full x16, x16 speed (blue)
1 x PCI Express™ 16, at x 8 speed (middle)
1 x PCI Express™ x1
2 x PCI 2.2
Scalable Link Interface
(SLI™)
Supports two identical NVIDIA® SLI™-Ready graphics
cards (both at x16 mode)
Note: The blue PCI Express x 16 slots support NVIDIA® SLI™
technology at full x16, x16 speed. The middle slot is for an add-on card at
x8 speed.
Storage/RAID
Southbridge supports:
-
-
-
1 x Ultra DMA 133/100/66/33
6 x Serial ATA 3.0 Gb/s
NVIDIA® MediaShield™ RAID supports RAID 0, 1,
0+1, 5 and JBOD configuration across Serial ATA
drives
LAN
NVIDIA® nForce 680i SLI built-in dual Gigabit MAC with
external Marvell PHY
-
Supports NVIDIA® DualNet®å Technology
(continued on the next page)
xi
Striker specifications summary
High Definition Audio
SupremeFX Audio Card
-
-
ADI 1988B 8-channel High Definition Audio CODEC
Supports Jack-Sensing, Enumeration,
Multi-streaming and Jack-Retasking
Noise Filter
-
Coaxial, Optical S/PDIF out
DTS® Connect
IEEE 1394
USB
VIA6308P controller supports:
-
2 x IEEE 1394a connectors (1 at mid-board, 1 on
the rear panel)
Supports up to 10 USB 2.0/1.1 ports (6 at mid-board, 4
on the rear panel)
ASUS Exclusive
Extreme Tweaker
Overclocking features
Intelligent overclocking tools:
-
-
-
AI NOS™ (Non-delay Overclocking System)
AI Overclocking (intelligent CPU frequency tuner)
AI Booster
Overclocking protection:
ASUS C.P.R. (CPU Parameter Recall)
-
ASUS Unique features
LCD Poster
Onboard Switches: Power / Reset / Clr CMOS
Q-Connector
ASUS CrashFree BIOS 2
ASUS EZ Flash 2
ASUS Music Alarm
ASUS MyLogo 3
Rear panel
1 x LCD Poster
1 x PS/2 Keyboard port (purple)
1 x PS/2 Mouse (green)
1 x Optical S/PDIF Output port
1 x Coaxial S/PDIF Output port
2 x LAN (RJ45) port
4 x USB 2.0/1.1 ports
1 x IEEE1394a port
(continued on the next page)
xii
Striker specifications summary
Internal connectors
1 x Floppy disk drive connector
1 x IDE connector for 2 devices
6 x Serial ATA connectors
3 x USB 2.0 connectors support six additional USB 2.0
ports
1 x IEEE 1394a port connector
1 x Chassis intrusion connector
1 x 24-pin ATX power connector
1 x 8-pin ATX 12V power connector
1 x S/PDIF output connector
3 x thermal sensor connectors
8 x Fan connectors: 1 x CPU / 1 x Power / 1 x Chassis /
5 x optional fan connectors
System panel connector
BIOS features
8 Mb AWARD BIOS, PnP, DMI2.0, WfM2.0, SM BIOS
2.3, Multi-Language BIOS
Manageability
Accessories
WOL by PME, WOR by PME, Chasis Intrusion, PXE
SLI bridge
ASUS optional fan
ASUS Q-connector Kit
UltraDMA 133/100/66 cable
Floppy disk drive cable
SATA cables
SATA power cables
Cable ties
2-port USB2.0 module
IEEE1394a module
I/O shield
User’s manual
Support DVD contents
The hottest 3D game: Ghost Recon
Device drivers
ASUS PC Probe II
ASUS Update
ASUS AI Booster
Futuremark® 3DMark® 06 Advanced Edition
Kaspersky® Anti-virus
NVIDIA® MediaShield™ RAID
Form factor
ATX form factor: 12 in x 9.6 in (30.5 cm x 24.5 cm)
*Specifications are subject to change without notice.
** available when the installed CPU is supporting 1333MHz FSB.
xiii
xiv
This chapter describes the motherboard
features and the new technologies
it supports.
Product
1
introduction
Chapter summary
1
1.1
1.2
1.3
Welcome! ...................................................................................... 1-1
Package contents......................................................................... 1-1
Special features............................................................................ 1-2
ASUS Striker
1.1
Welcome!
Thank you for buying an ASUS® Striker motherboard!
The motherboard delivers a host of new features and latest technologies, making it
another standout in the long line of ASUS quality motherboards!
Before you start installing the motherboard, and hardware devices on it, check the
items in your package with the list below.
1.2
Package contents
Check your motherboard package for the following items.
Motherboard
I/O modules
ROG Series: ASUS Striker motherboard
1 x 1-port IEEE 1394a module
1 x 2-port USB 2.0 module
Cables
Serial ATA power and signal cables for 6 devices
1 x Ultra DMA 133/100/66 cable
1 x Floppy disk drive cable
Cable ties
Accessories
I/O shield
1 x ASUS Optional Fan
1 x 3-in-1 ASUS Q-Connector Kit
(USB, IEEE 1394, system panel; Retail version only)
1 x ASUS SLI Bridge
Application DVD
Documentation
ASUS motherboard support DVD
3D Game-Ghost Recon Advanced Warfighter
User guide
If any of the above items is damaged or missing, contact your retailer.
ASUS Striker
1-1
1.3
Special features
1.3.1
Product highlights
Republic of Gamers (R.O.G)
The Republic of Gamers consists only the best of the best. We offer the best
hardware engineering, the fastest performance, the most innovating ideas, and we
welcome the best gamers to join in.
In the Republic of Gamers, mercy rules are only for the weak, and bragging rights
means everything. We believe in making statements and we excel in competitions.
If your character matches our trait, then join the elite club, make your presence felt,
in the Republic of Gamers.
Intel® Core™2 / Quad-core Processor Ready
This motherboard supports the latest Intel® Core™2 processor in the LGA775
package. With the new Intel® Core™ microarchitecture technology and 1066 /
800 MHz FSB, the Intel® Core™2 is one of the most powerful and energy efficient
CPUs in the world. This motherboard also supports the latest Intel® Quad-core
processor, which is excellent for multi-tasking, multi-media and enthusiastic
gamers with 1066 / 800 MHz FSB. See page 2-7 for details.
NVIDIA® nForce® 680i SLI chipset
The NVIDIA® nForce 680i SLI chipset supports the NVIDIA® Scalable Link Interface
(SLI™) technology that allows two graphics processing units (GPUs) in a single
system. It’s designed for enthusiast, extreme overclocking capability, ultimate
gaming performance with SLI technology support. It’s definitely one of the fastest
platform in the world. See Chapter 6 for details. The NVIDIA® nForce 680i SLI
chipset also supports six (6) Serial ATA 3.0 Gb/s devices, dual PCI Express™ x16
slots at with NVIDIA® SLI™ support at full x16, x16 mode, and up to 10 USB 2.0
ports.
NVIDIA® Scalable Link Interface (SLI™)
NVIDIA SLI™ (Scalable Link Interface) takes advantage of the increased
bandwidth of the PCI Express bus architecture and features intelligent hardware
and software that allows two GPUs to efficiently work together to deliver earth-
shattering, scalable performance.
1-2
Chapter 1: Product Introduction
DDR2 memory support
The motherboard supports DDR2 memory that features data transfer rates
of 800/667/533 MHz to meet the higher bandwidth requirements of the latest
3D graphics, multimedia, and Internet applications. The dual-channel DDR2
architecture doubles the bandwidth of your system memory to boost system
performance, eliminating bottlenecks with peak bandwidths of up to 12.8 GB/s.
See page 2-15 for details.
Serial ATA 3.0 Gb/s technology
The motherboard fully supports the Serial ATA II 3.0 Gb/s technology through the
Serial ATA interfaces and the NVIDIA® nForce® 680i SLI™ chipset. The Serial
ATA 3.0 Gb/s specification provides twice the bandwidth of the current Serial ATA
products with a host of new features, including Native Command Queueing (NCQ),
and Power Management (PM) Implementation Algorithm. Serial ATA allows for
thinner, more flexible cables with lower pin count and reduced voltage required.
See page 2-28 for details.
IEEE 1394a support
The IEEE 1394a interface provides high speed digital interface for audio/video
appliances such as digital television, digital video camcorders, storage peripherals
& other PC portable devices. See pages 2-24 and 2-30 for details.
S/PDIF digital sound ready
This motherboard provides convenient connectivity to external home theater
audio systems via coaxial and optical S/PDIF-out (SONY/PHILIPS Digital
Interface) jacks.It allows to transfer digital audio without converting to analog
format and keeps the best signal quality. See pages 2-25 and 2-35 for details.
Dual Gigabit LAN solution
The motherboard comes with dual Gigabit LAN controllers to provide the total
solution for your networking needs. These network controllers use the PCI
Express segment to provide faster data bandwidth for your wired or wireless
Internet, LAN, and file sharing requirements. See page 2-23 for details.
ASUS Striker
1-3
1.3.2
ASUS ROG unique features
8-phase cap-less Power design
The 8-phase EL Capless Power Design demonstrates two hardcore commitments
of ROG products: ultimate overclocking capability, and ultimate reliability. The 8-
phase power design yields unparalleled superiority in the overclocking arena, while
the cap-less design removes any worries of capacitor problems once and for all.
Fanless Design
The ASUS fanless design allows multi-directional heat flow from major thermal
sources in the motherboard to lower overall system temperature, resulting in
quieter operation and longer system life. ASUS has devoted special efforts to
address the thermal issues across the motherboard, and most notably in the
following areas: CPU, power, VGA, Northbridge and Southbridge. The heat pipe,
heatsink, and strategic board layout were tailor made to dissipate heat in the most
efficient manner.
Extreme Tweaker
This feature allows you to fine tune the CPU/memory voltage and gradually
increase the memory Front Side Bus (FSB) and PCI Express frequency at 1MHz
increment to achieve maximum system performance.
ASUS Q-Connector
The ASUS Q-Connector allows you to connect or disconnect chassis front panel
cables in one easy step. This unique adapter eliminates the trouble of plugging in
one cable at a time, making connection quick and error-free. See page 2-36 for
details.
ASUS LCD Poster
The LCD Poster displays actual boot error messages instead of codes that other
debug cards show. This unique feature allows you to easily find out which devices
fail during the boot process, eliminating guesswork and allowing you to solve the
problem immediately. See page 2-23 for details
Onboard Switches
A power-on button, a resetbutton, and a clear CMOS button are onboard to provide
overclockers and gamers the convenience of fine-tuning performance when
working on a bare (open-case) system. Press the power-on button to wake up
the system, the reset button to reboot, and the clear CMOS button to clear setup
information when the system hangs due to overclocking. See page 2-37 for details.
1-4
Chapter 1: Product Introduction
ASUS Multi-language BIOS
The multi-language BIOS allows you to select the language of your choice from the
available options. The localized BIOS menus allow easier and faster configuration.
See page 4-14 for details.
ASUS MyLogo3
This new feature present in the motherboard allows you to personalize and add
style to your system with customizable boot logos. See page 5-9 for details.
ASUS CrashFree BIOS 2
This feature allows you to restore the original BIOS data from the support CD when
the BIOS codes and data are corrupted. This protection eliminates the need to buy
a replacement ROM chip. See page 4-9 for details.
ASUS EZ Flash 2
EZ Flash 2 is a user-friendly BIOS update utility. Simply launch this tool and update
BIOS from a USB flash disk before entering the OS. You can update your BIOS
only in a few clicks without preparing an additional floppy diskette or using an
OS-based flash utility. See pages 4-5 and 4-46 for details.
ASUS Striker
1-5
C.P.R. (CPU Parameter Recall)
The C.P.R. feature of the motherboard BIOS allows automatic re-setting to the
BIOS default settings in case the system hangs due to overclocking. When the
system hangs due to overclocking, C.P.R. eliminates the need to open the system
chassis and clear the RTC data. Simply shut down and reboot the system, and the
BIOS automatically restores the CPU default setting for each parameter.
ASUS Music Alarm
Wake up to the music of your choice instead of the irritating sound of an alarm
clock. The ASUS Music Alarm gives you a personal wake-up call with your favorite
CD music without having to enter the OS. See pages 4-43 and 5-22 for details.
Supreme FX features
This feature can enhance speech-centric applications like Skype, online game,
video conference and recording.
Noise Filter
This feature detects repetitive and stationary noises (non-voice signals) like
computer fans, air conditioners, and other background noises then eliminates
it in the incoming audio stream while recording. See page 5-15 for details.
DTS® Connect
This feature is consists of two elements: DTS interactive and DTS NEO:PC.
DTS interactive re-encodes your stereo or multi-channel sound into a DTS
audio signal and send it out from your PC to any DTS enabled system. While
DTS NEO:PC turns your stereo audio such as MP3, WMA, CD, and other
sound format into a convincing multi-channel audio experience. See page
5-14 for details.
1-6
Chapter 1: Product Introduction
This chapter lists the hardware setup
procedures that you have to perform
when installing system components. It
includes description of the jumpers and
connectors on the motherboard.
Hardware
2
information
Chapter summary
2
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.8
Before you proceed ..................................................................... 2-1
Motherboard overview................................................................. 2-2
Central Processing Unit (CPU) ................................................... 2-7
System memory ......................................................................... 2-15
Expansion slots.......................................................................... 2-18
Jumper ........................................................................................ 2-21
Audio Card Installation.............................................................. 2-22
Connectors ................................................................................. 2-23
ASUS Striker
2.1
Before you proceed
Take note of the following precautions before you install motherboard components
or change any motherboard settings.
•
Use a grounded wrist strap or touch a safely grounded object or to
a metal object, such as the power supply case, before handling
components to avoid damaging them due to static electricity.
•
•
Hold components by the edges to avoid touching the ICs on them.
Whenever you uninstall any component, place it on a grounded
antistatic pad or in the bag that came with the component.
Onboard LED
The motherboard comes with a standby power LED. The green LED lights up
to indicate that the system is ON, in sleep mode, or in soft-off mode. This is a
reminder that you should shut down the system and unplug the power cable before
removing or plugging in any motherboard component. The illustration below shows
the location of the onboard LED.
SB_PWR
®
STRIKER
ON
OFF
Standby
Power
Powered
Off
STRIKER Onboard LED
ASUS Striker
2-1
2.2
Motherboard overview
Before you install the motherboard, study the configuration of your chassis to
ensure that the motherboard fits into it.
Make sure to unplug the power cord before installing or removing the
motherboard. Failure to do so can cause you physical injury and damage
motherboard components.
2.2.1
Placement direction
When installing the motherboard, make sure that you place it into the chassis in
the correct orientation. The edge with external ports goes to the rear part of the
chassis as indicated in the image below.
2.2.2
Screw holes
Place nine (9) screws into the holes indicated by circles to secure the motherboard
to the chassis.
Do not overtighten the screws! Doing so can damage the motherboard.
Place this side towards
the rear of the chassis
®
STRIKER
2-2
Chapter 2: Hardware information
2.2.3
ASUS Stack Cool 2
The motherboard comes with the ASUS Stack Cool 2 cooling solution that lowers
the temperature of critical heat generating components. The motherboard uses
a special design on the printed circuit board (PCB) to dissipate heat that critical
components generate.
ASUS Striker
2-3
2.2.4
Motherboard layout
24.5cm (9.6in)
CPU_FAN
ATX12V
PS/2KBMS
T: Mouse
B: Keyboard
SPDIF_O1
1394a
LGA775
LAN1_USB12
LAN2_USB34
NVIDIA®
®
NFORCE 680i SLI
CHA_FAN1
USB910
Intel® Edition
Audio slot
OPT_FAN2
®
OPT_TEMP2
Marvell
88E1116
PCIEX16_1
PCIEX1
Marvell
88E1116
NVIDIA®
®
PCIEX16_2
NFORCE 680i SLI
Intel® Edition
STRIKER
CR2032 3V
Lithium Cell
CMOS Power
PCI1
OPT_TEMP1
SB_PWR
PCIEX16_3
8Mb
BIOS
OPT_FAN4
OPT_FAN5
OPT_FAN1
CLRTC
PCI2
CHASSIS
SPDIF_O2
IE1394_2
OPT_TEMP3
ADH
USB56
USB78
OPT_FAN3
PWR_SW RST_SW
CLR_CMOS
PANEL
2-4
Chapter 2: Hardware information
2.2.5
Layout contents
Slots
Page
2-15
2-20
2-20
2-20
1.
2.
3.
4.
DDR2 DIMM slots
PCI slots
PCI Express x1 slot
PCI Express x16 slots
Jumper
Page
1.
Clear RTC RAM (3-pin CLRTC_EN)
2-21
Rear panel connectors
Page
2-23
2-23
2-23
2-24
2-23
2-23
2-24
2-25
2-23
1.
2.
3.
4.
5.
6.
7.
8.
9.
PS/2 mouse port (green)
Coaxial S/PDIF Out port
LCD Poster
IEEE 1394a port
LAN 2 (RJ-45) port.
LAN 1 (RJ-45) port
USB 2.0 ports 1 and 2, 3 and 4
Optical S/PDIF Out port
PS/2 keyboard port (purple)
Supreme FX
Page
2-24
2-24
1.
2.
Line In port (light blue)
Line Out port (lime)
3.
4.
5.
6.
Microphone port (pink)
2-24
2-24
2-24
2-24
Center/Subwoofer port (orange)
Side Speaker Out port (gray)
Rear Speaker Out port (black)
ASUS Striker
2-5
Internal connectors
Page
2-26
2-27
2-28
1.
2.
3.
Floppy disk drive connector (34-1 pin FLOPPY)
IDE connector (40-1 pin PRI_IDE)
Serial ATA connectors
(7-pin SATA1, SATA2, SATA3, SATA4, SATA5, SATA6)
4.
5.
6.
USB connectors (10-1 pin USB56, USB 78, USB910)
IEEE 1394a port connector (10-1 pin IE1394_2)
2-29
2-30
2-31
CPU, chassis, power, and optional fan connectors
(4-pin CPU_FAN, 3-pin CHA_FAN1, 3-pin OPT-FAN 1~5,
3-pin PWR_FAN)
7.
8.
Chassis intrusion connector (4-1 pin CHASSIS)
2-32
2-32
ATX power connectors (24-pin EATXPWR, 2 x 4-pin ATX12V)
9.
S/PDIF output connector (4-1 pin SPDIF_02)
System panel connector (20-8-pin PANEL)
2-35
2-36
10.
•
•
•
•
•
System power LED (2-pin PLED)
Hard disk drive activity LED (2-pin IDE_LED)
System warning speaker (4-pin SPEAKER)
ATX power button/soft-off button (2-pin PWR)
Reset button (2-pin RESET)
ASUS Q-connector (system panel)
Thermal sensor cable connectors
2-37
2-38
11.
Onboard switches
Page
2-38
2-39
2-39
1.
2.
3.
Clear CMOS switch
Power-on switch
Reset switch
2-6
Chapter 2: Hardware information
2.3
Central Processing Unit (CPU)
The motherboard comes with a surface mount LGA775 socket designed for the
Intel® Quad-core / Core™2 Extreme / Core™2 Duo / Pentium® Extreme / Pentium®
D/ Pentium® 4 and Celeron® D processors.
•
•
Make sure that all power cables are unplugged before installing the CPU.
Connect the chassis fan cable to the CHA_FAN1 connector to ensure
system stability.
•
Upon purchase of the motherboard, make sure that the PnP cap is on
the socket and the socket contacts are not bent. Contact your retailer
immediately if the PnP cap is missing, or if you see any damage to the PnP
cap/socket contacts/motherboard components. ASUS will shoulder the cost
of repair only if the damage is shipment/transit-related.
•
•
Keep the cap after installing the motherboard. ASUS will process Return
Merchandise Authorization (RMA) requests only if the motherboard comes
with the cap on the LGA775 socket.
The product warranty does not cover damage to the socket contacts
resulting from incorrect CPU installation/removal, or misplacement/loss/
incorrect removal of the PnP cap.
ASUS Striker
2-7
2.3.1
Installing the CPU
To install a CPU:
1.
Locate the CPU socket on the motherboard.
®
STRIKER
STRIKER CPU Socket 775
Before installing the CPU, make sure that the socket box is facing towards you
and the load lever is on your left.
2.
Press the load lever with your thumb (A), then move it to the left (B) until it is
released from the retention tab.
Retention tab
A
PnP cap
Load lever
B
This side of the socket box
should face you.
To prevent damage to the socket pins, do not remove the PnP cap unless you
are installing a CPU.
3.
Lift the load lever in the direction of
the arrow to a 135º angle.
2-8
Chapter 2: Hardware information
4.
Lift the load plate with your thumb
and forefinger to a 100º angle (A),
then push the PnP cap from the load
plate window to remove (B).
B
A
Load plate
Alignment key
5.
Position the CPU over the
socket, making sure that
the gold triangle is on the
bottom-left corner of the
socket then fit the socket
alignment key into the
CPU notch.
CPU notch
Gold triangle mark
The CPU fits in only one correct orientation. DO NOT force the CPU into the
socket to prevent bending the connectors on the socket and damaging the CPU!
A
6.
7.
Close the load plate (A), then
push the load lever (B) until it
snaps into the retention tab.
If installing a dual-core CPU,
B
connect the chassis fan cable
to the CHA_FAN1 connector to
ensure system stability.
The motherboard supports Intel® LGA775 processors with the Intel® Enhanced
Memory 64 Technology (EM64T), Enhanced Intel SpeedStep® Technology
(EIST), and Hyper-Threading Technology. Refer to the Appendix for more
information on these CPU features.
ASUS Striker
2-9
2.3.2
Installing the CPU heatsink and fan
The Intel® LGA775 processor requires a specially designed heatsink and fan
assembly to ensure optimum thermal condition and performance.
•
When you buy a boxed Intel® processor, the package includes the CPU fan
and heatsink assembly. If you buy a CPU separately, make sure that you
use only Intel®-certified multi-directional heatsink and fan.
•
•
Your Intel® LGA775 heatsink and fan assembly comes in a push-pin design
and requires no tool to install.
If you purchased a separate CPU heatsink and fan assembly, make sure
that you have properly applied Thermal Interface Material to the CPU
heatsink or CPU before you install the heatsink and fan assembly.
Make sure that you have installed the motherboard to the chassis before you
install the CPU fan and heatsink assembly.
To install the CPU heatsink and fan:
1.
Place the heatsink on top of the
installed CPU, making sure that
the four fasteners match the holes
on the motherboard.
Orient the heatsink and fan
assembly such that the CPU fan
cable is closest to the CPU fan
connector.
Motherboard hole
Fastener
Narrow end
of the groove
Make sure to orient each fastener with the narrow end of the groove pointing
outward. (The photo shows the groove shaded for emphasis.)
2-10
Chapter 2: Hardware information
2.
Push down two fasteners at a time in
a diagonal sequence to secure the
heatsink and fan assembly in place.
B
B
A
A
A
B
B
A
3.
Connect the CPU fan cable to the connector on the motherboard labeled
CPU_FAN.
CPU_FAN
®
STRIKER
STRIKER CPU fan connector
Do not forget to connect the CPU fan connector! Hardware monitoring errors
can occur if you fail to plug this connector.
ASUS Striker
2-11
2.3.3
Uninstalling the CPU heatsink and fan
To uninstall the CPU heatsink and fan:
1.
2.
Disconnect the CPU fan cable from
the connector on the motherboard.
Rotate each fastener
counterclockwise.
3.
Pull up two fasteners at a time in
a diagonal sequence to disengage
the heatsink and fan assembly
from the motherboard.
B
B
A
A
A
B
B
A
4.
Carefully remove the heatsink
and fan assembly from the
motherboard.
2-12
Chapter 2: Hardware information
5.
Rotate each fastener clockwise to
ensure correct orientation when
reinstalling.
Narrow end of the groove
The narrow end of the
groove should point
outward after resetting.
(The photo shows the
groove shaded for
emphasis.)
Refer to the documentation in the boxed or stand-alone CPU fan package for
detailed information on CPU fan installation.
ASUS Striker
2-13
2.3.4
Installing the optional fan
Install the optional fan only if you are using a passive cooler or a water cooler.
Installing the optional fan with an active CPU cooler will interfere with the airflow
and destabilize the system.
1.
Position the fan above the pipe
and heatsink assembly.
2.
Fit the grooved edge to the
heatsink.
3.
Carefully push down the fan until
it snugly fits the heatsink, then
connect the fan cables.
4.
The above photo shows the fan
installed on the motherboard.
•
•
Plug the optional fan cables to any of the OPT FAN1~5 connectors on the
motherboard.
Make sure the optional fan is installed correctly to prevent damage to the
fan and motherboard components.
2-14
Chapter 2: Hardware information
2.4
System memory
2.4.1
Overview
The motherboard comes with four Double Data Rate 2 (DDR2) Dual Inline Memory
Modules (DIMM) sockets.
A DDR2 module has the same physical dimensions as a DDR DIMM but has a
240-pin footprint compared to the 184-pin DDR DIMM. DDR2 DIMMs are notched
differently to prevent installation on a DDR DIMM socket.
The figure illustrates the location of the DDR2 DIMM sockets:
®
STRIKER
STRIKER
240-pin DDR2 DIMM sockets
Channel
Sockets
Channel A
Channel B
DIMM_A1 and DIMM_A2
DIMM_B1 and DIMM_B2
ASUS Striker
2-15
2.4.2
Memory configurations
You may install 256 MB, 512 MB, 1 GB, and 2 GB unbuffered non-ECC DDR2
DIMMs into the DIMM sockets.
•
For dual-channel configuration, the total size of memory module(s) installed
per channel must be the same (DIMM_A1 + DIMM_A2 = DIMM_B1 +
DIMM_B2).
•
Always install DIMMs with the same CAS latency. For optimum
compatibility, we recommend that you obtain memory modules from the
same vendor. Visit the ASUS website at www.asus.com for the latest DDR2
Qualified Vendors List.
•
•
Due to chipset resource allocation, the system may detect less than 8 GB
system memory when you installed four 2 GB DDR2 memory modules.
The motherboard can support up to 8 GB on the operating system listed
below. You may install a maximum of 2 GB DIMMs on each slot.
32-bit
64-bit
Windows® 2000 Advanced Server
Windows® Server 2003 Standard x64
Edition
Windows® Server 2003 Enterprise
Edition
Windows® XP Professional x64 Edition
Windows® Server 2003 Enterprise x64
Edition
Visit the ASUS website for the latest DDR2-800/667/533 MHz QVL.
2-16
Chapter 2: Hardware information
2.4.3
Installing a DIMM
Unplug the power supply before adding or removing DIMMs or other
system components. Failure to do so can cause severe damage to both the
motherboard and the components.
2
To install a DIMM:
DDR2 DIMM notch
3
1.
2.
3.
Unlock a DIMM socket by
pressing the retaining clips
outward.
1
Align a DIMM on the socket
such that the notch on the DIMM
matches the break on the socket.
1
Firmly insert the DIMM into the
socket until the retaining clips
snap back in place and the DIMM
is properly seated.
Unlocked retaining clip
•
A DDR2 DIMM is keyed with a notch so that it fits in only one direction. Do
not force a DIMM into a socket to avoid damaging the DIMM.
•
The DDR2 DIMM sockets do not support DDR DIMMs. Do not install DDR
DIMMs to the DDR2 DIMM sockets.
2.4.4
Removing a DIMM
To remove a DIMM:
2
1. Simultaneously press the retaining
clips outward to unlock the DIMM.
Support the DIMM lightly with
your fingers when pressing the
retaining clips. The DIMM might
get damaged when it flips out with
extra force.
1
DDR2 DIMM notch
1
2.
Remove the DIMM from the socket.
ASUS Striker
2-17
2.5
Expansion slots
In the future, you may need to install expansion cards. The following sub-sections
describe the slots and the expansion cards that they support.
Make sure to unplug the power cord before adding or removing expansion
cards. Failure to do so may cause you physical injury and damage motherboard
components.
2.5.1
Installing an expansion card
To install an expansion card:
1.
2.
3.
4.
Before installing the expansion card, read the documentation that came with
it and make the necessary hardware settings for the card.
Remove the system unit cover (if your motherboard is already installed in a
chassis).
Remove the bracket opposite the slot that you intend to use. Keep the screw
for later use.
Align the card connector with the slot and press firmly until the card is
completely seated on the slot.
5.
6.
Secure the card to the chassis with the screw you removed earlier.
Replace the system cover.
2.5.2
Configuring an expansion card
After installing the expansion card, configure it by adjusting the software settings.
1.
Turn on the system and change the necessary BIOS settings, if any. See
Chapter 4 for information on BIOS setup.
2.
3.
Assign an IRQ to the card. Refer to the tables on the next page.
Install the software drivers for the expansion card.
When using PCI cards on shared slots, ensure that the drivers support “Share
IRQ” or that the cards do not need IRQ assignments. Otherwise, conflicts will
arise between the two PCI groups, making the system unstable and the card
inoperable. Refer to the table on the next page for details.
2-18
Chapter 2: Hardware information
2.5.3
Interrupt assignments
IRQ
Standard function
0
1
4
System timer
Standard 101/102-key or Microsoft Natural Keyboard
Communications Port (COM1)*
6
Standard floppy disk controller
8
System CMOS/real-time clock
9
9
9
Microsoft ACPI-compliant system
NVIDIA nForce networking controller #3
NVIDIA nForce networking controller #4
NVIDIA nForce PCI system management
Mass storage controller
PS/2 compatible mouse port
Numeric data processor
Primary IDE channel
VIA OHCI compliant IEEE 1394 host controller
NVIDIA nForce 590/570/550 Serial ATA controller
NVIDIA network bus enumerator
NVIDIA network bus enumerator
Standard OpenHCD USB host controller
NVIDIA nForce 590/570/550 Serial ATA controller
Standard Enhanced PCI to USB host controller
NVIDIA nForce 590/570/550 Serial ATA controller
10
11
12
13
14
19
20
20
21
22
22
23
23
IRQ assignments for this motherboard
A
–
–
–
–
B
–
–
–
–
–
C
–
–
–
–
–
D
–
–
–
–
–
E
F
G
–
–
–
–
–
H
–
–
–
–
–
PCIEx16_1
PCIEx16_2
PCIEx16_3
PCIEx1_1
PCI Slot_1
shared
–
shared
–
–
–
shared
–
shared
–
shared
PCI Slot_2
USB 1.1
USB 2.0
LAN_1
–
shared
shared
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
shared
–
–
shared
shared
–
–
–
LAN_2
–
–
–
PATA
shared
–
–
SATA_1
SATA_2
SATA_3
SATA_RAID
1394
–
–
–
–
–
–
shared
–
–
–
shared
–
–
–
used
–
shared
shared
–
–
–
–
Audio
shared
–
ASUS Striker
2-19
2.5.4
PCI slots
The PCI slots support cards such as a LAN card, SCSI card, USB card, and other
cards that comply with PCI specifications. Refer to the figure below for the location
of the slots.
2.5.5
PCI Express x1 slot
This motherboard supports PCI Express x1 network cards, SCSI cards and other
cards that comply with the PCI Express specifications. Refer to the figure below for
the location of the slot.
2.5.6
PCI Express x16 slots
This motherboard has three PCI Express x16 slots that support PCI Express x16
graphic cards complying with the PCI Express specifications. Refer to the figure
below for the location of the slots.
PCI slot
PCI Express x 16 slot (blue)
PCI slot
PCI Express x 16 slot
PCI Express x 1 slot
PCI Express x 16 slot (blue)
2-20
Chapter 2: Hardware information
2.6
Jumper
Clear RTC RAM (CLRTC_EN)
This jumper allows you to enable the CLRTC switch. You can clear the
CMOS memory of date, time, and system setup parameters by erasing the
CMOS RTC RAM data. The onboard clr CMOS switch helps you easily to
clear the system setup information such as system passwords. See page
2-35 for details.
To erase the RTC RAM:
1. Turn OFF the computer and unplug the power cord.
2. Move the jumper cap from pins 1-2 (default) to pins 2-3 to enable the
CLRTC function.
3. Press down the clr CMOS button and again to release it.
4. Plug the power cord and turn ON the computer.
5. Hold down the <Del> key during the boot process and enter BIOS setup
to re-enter data.
The clr CMOS button will not function until the jumper cap on CLRTC_EN is
moved to the ENABLE position. Removing the cap will cause system boot
failure!
®
CLRTC_EN
STRIKER
1
2
2
3
Normal
Clear RTC
STRIKER Clear RTC RAM
(Default)
•
•
Make sure to re-enter your previous BIOS settings after you clear the
CMOS.
You do not need to clear the RTC when the system hangs due to
overclocking. For system failure due to overclocking, use the C.P.R. (CPU
Parameter Recall) feature. Shut down and reboot the system so the BIOS
can automatically reset parameter settings to default values.
•
To prevent accidental pressing of the Clear CMOS switch, the CLRTC_EN
jumper default setting disables the switch.
ASUS Striker
2-21
2.7
Audio Card Installation
1.
Take out the Audio card from
the package.
2.
Locate the slot on the
motherboard.
4.
The above photo shows the
audio card installed on the
motherboard.
3.
Align the card connector
with the slot and press firmly
until the card sits on the slot
completely.
2-22
Chapter 2: Hardware information
2.8
Connectors
2.8.1
Rear panel connectors
6
7
8
9
1
2
3
4
5
10
11
15
14
13
12
1.
2.
PS/2 mouse port (green). This port is for a PS/2 mouse.
Coaxial S/PDIF Out port. This port connects an external audio output device
via an optical S/PDIF cable.
3.
4.
LCD Poster. This poster displays actual boot error messages.
LAN 1 (RJ-45) port. Supported by NV Gigabit LAN
controller, this port allows Gigabit connection to a Local
Area Network (LAN) through a network hub. Refer to the
table on the next page for the LAN port LED indications.
ACTIVITY/ SPEED
LINK LED
LED
5.
LAN 2 (RJ-45) port. Supported by the NV Gigabit LAN
controller, this port allows Gigabit connection to a Local
Area Network (LAN) through a network hub. Refer to the
table below for the LAN port LED indications.
LAN port
32-bit OS LAN port LED indications
Activity/Link
OFF
Speed LED
OFF
Description
Soft-off Mode
YELLOW*
YELLOW*
OFF
During Power ON/OFF
100 Mbps connection
ORANGE
* Blinking
ASUS Striker
2-23
64-bit OS LAN port LED indications
Activity/Link
Speed LED
DNR
Description
DNR
DNR
DNR
DNR
Soft-off Mode
DNR
DNR
DNR
During Power ON/OFF
100 Mbps connection
1 Gbps connection
6.
7.
Line In port (light blue). This port connects the tape, CD, DVD player, or
other audio sources.
Line Out port (lime). This port connects a headphone or a speaker. In
4-channel, 6-channel, and 8-channel configuration, the function of this port
becomes Front Speaker Out.
8.
9.
Microphone port (pink). This port connects a microphone.
Center/Subwoofer port (orange). This port connects the center/subwoofer
speakers.
10. Rear Speaker Out port (black). This port connects the rear speakers on a
4-channel, 6-channel, or 8-channel audio configuration.
11. Side Speaker Out port (gray). This port connects the side speakers in an
8-channel audio configuration.
Refer to the audio configuration table below for the function of the audio ports in
2, 4, 6, or 8-channel configuration.
Audio 2, 4, 6, or 8-channel configuration
Headset
2-channel
Port
4-channel
6-channel
8-channel
Light Blue
Lime
Line In
Line In
Line In
Front Speaker Out
Mic In
Line In
Line Out
Front Speaker Out
Front Speaker Out
Mic In
Pink
Mic In
Mic In
Orange
Black
–
–
–
–
Center/Subwoofer
Rear Speaker Ou
–
Center/Subwoofer
Rear Speaker Out
Side Speaker Out
Rear Speaker Out
–
Gray
12. USB 2.0 ports 1 and 2, 3 and 4. These 4-pin Universal Serial Bus (USB)
ports are available for connecting USB 2.0 devices.
13. IEEE 1394a port. This 6-pin IEEE 1394a port provides high-speed
connectivity for audio/video devices, storage peripherals, PCs, or portable
devices.
2-24
Chapter 2: Hardware information
14. Optical S/PDIF Out port. This port connects an external audio output device
via an optical S/PDIF cable.
15. PS/2 keyboard port (purple). This port is for a PS/2 keyboard.
ASUS Striker
2-25
2.8.2
Internal connectors
1.
Floppy disk drive connector (34-1 pin FLOPPY)
This connector is for the provided floppy disk drive (FDD) signal cable. Insert
one end of the cable to this connector, then connect the other end to the
signal connector at the back of the floppy disk drive.
Pin 5 on the connector is removed to prevent incorrect cable connection when
using a FDD cable with a covered Pin 5.
FLOPPY
NOTE: Orient the red markings on
the floppy ribbon cable to PIN 1.
®
STRIKER
PIN 1
STRIKER Floppy disk drive connector
2-26
Chapter 2: Hardware information
2.
IDE connector (40-1 pin PRI_IDE)
The onboard IDE connector is for the Ultra DMA 133/100/66 signal cable.
There are three connectors on each Ultra DMA 133/100/66 signal cable:
blue, black, and gray. Connect the blue connector to the motherboard’s IDE
connector, then select one of the following modes to configure your device.
Drive jumper setting
Mode of
Cable connector
device(s)
Single device
Two devices
Cable-Select or Master
Cable-Select
-
Black
Black
Master
Slave
Master
Slave
Gray
Master
Slave
Black or gray
PRI_IDE
NOTE: Orient the red markings
(usually zigzag) on the IDE
ribbon cable to PIN 1.
®
STRIKER
PIN 1
STRIKER IDE connector
•
•
Pin 20 on the IDE connector is removed to match the covered hole on the
Ultra DMA cable connector. This prevents incorrect insertion when you
connect the IDE cable.
Use the 80-conductor IDE cable for Ultra DMA 133/100/66 IDE devices.
If any device jumper is set as “Cable-Select,” make sure all other device
jumpers have the same setting.
ASUS Striker
2-27
3.
Serial ATA connectors (7-pin SATA1, SATA2, SATA3, SATA4, SATA5,
SATA6)
These connectors are for the Serial ATA signal cables for Serial ATA hard disk
drives.
If you installed Serial ATA hard disk drives, you can create a RAID 0, RAID
1, RAID 0+1, RAID 5, or JBOD configuration with the onboard NVIDIA®
MediaShield™ RAID controller.
The RAID function of these connectors is set to [Disabled] by default. If you
intend to create a Serial ATA RAID set using these connectors, enable the RAID
Enabled item under the Serial ATA Configuration sub-menu in the BIOS. See
section “4.5.3 Onboard Device Configuration” for details.
SATA1
SATA3
SATA4
SATA5
SATA6
®
SATA2
STRIKER
STRIKER SATA connectors
These connectors support Native Command Queuing (NCQ), Power
Management (PM) Implementation Algorithm, Hot Swap and smart setup.
Right-angle side
Connect the right-angle side of SATA
signal cable to the SATA device, or
connect the right-angle side of the
SATA cable to the onboard SATA port
to avoid mechanical conflict with huge
graphics cards.
2-28
Chapter 2: Hardware information
4.
USB connectors (10-1 pin USB56, USB78, USB910)
These connectors are for USB 2.0 ports. Connect the USB module cable
to any of these connectors, then install the module to a slot opening at the
back of the system chassis. These USB connectors comply with USB 2.0
specification that supports up to 480 Mbps connection speed.
USB910 1
®
STRIKER
USB56
USB78
1
1
STRIKER
USB 2.0 connectors
Never connect a 1394 cable to the USB connectors. Doing so will damage the
motherboard!
You can connect the USB cable to ASUS Q-Connector (USB, blue) first, and
then install the Q-Connector (USB) to the USB connector onboard.
ASUS Striker
2-29
5.
IEEE 1394a port connector (10-1 pin IE1394_2)
This connector is for a IEEE 1394a port. Connect the IEEE 1394a module
cable to this connector, then install the module to a slot opening at the back
of the system chassis.
®
STRIKER
IE1394_2
PIN1
STRIKER
IEEE 1394 connector
Never connect a USB cable to the IEEE 1394a connector. Doing so will damage
the motherboard!
You can connect the 1394 cable to ASUS Q-Connector (1394, red) first, and
then install the Q-Connector (1394) to the 1394 connector onboard.
2-30
Chapter 2: Hardware information
6.
CPU, chassis, power, and optional fan connectors
(4-pin CPU_FAN, 3-pin CHA_FAN1, 3-pin PWR_FAN, 3-pin OPT_FAN1~5)
The fan connectors support cooling fans of 350 mA ~ 2000 mA (24 W max.)
or a total of 1 A ~ 7 A (84 W max.) at +12V. Connect the fan cables to the
fan connectors on the motherboard, making sure that the black wire of each
cable matches the ground pin of the connector.
Do not forget to connect the fan cables to the fan connectors. Insufficient air
flow inside the system may damage the motherboard components. These are
not jumpers! Do not place jumper caps on the fan connectors!
CPU_FAN PWR_FAN CHA_FAN1
CPU_FAN
PWR_FAN
OPT_FAN4
CHA_FAN1
OPT_FAN2
®
OPT_FAN2 OPT_FAN3
OPT_FAN1
Rotation
+12V
OPT_FAN3
GND
STRIKER
OPT_FAN4
OPT_FAN5
OPT_FAN1
OPT_FAN5
Rotation
+12V
GND
STRIKER Fan connectors
•
•
Only the CHA_FAN1 and OPT_FAN 1~3 connectors support the ASUS
Q-FAN 2 feature.
If you install two VGA cards, we recommend that you plug the rear chassis
fan cable to the motherboard connector labeled OPT_FAN1 or OPT_FAN2
for better themal environment.
ASUS Striker
2-31
7.
Chassis intrusion connector (4-1 pin CHASSIS)
This connector is for a chassis-mounted intrusion detection sensor or switch.
Connect one end of the chassis intrusion sensor or switch cable to this
connector. The chassis intrusion sensor or switch sends a high-level signal to
this connector when a chassis component is removed or replaced. The signal
is then generated as a chassis intrusion event.
By default , the pin labeled “Chassis Signal” and “ Ground” are shorted with
a jumper cap. Remove the jumper caps only when you intend to use the
chassis intrusion detection feature.
®
STRIKER
CHASSIS
(Default)
STRIKER Chassis intrusion connector
8.
ATX power connectors
(24-pin EATXPWR, 2 x 4-pin ATX12V)
These connectors are for ATX power supply plugs. The power supply plugs
are designed to fit these connectors in only one orientation. Find the proper
orientation and push down firmly until the connectors completely fit.
EATXPWR
+3 Volts
+12 Volts
+12 Volts
+5V Standby
Power OK
Ground
Ground
+5 Volts
+5 Volts
+5 Volts
-5 Volts
Ground
Ground
Ground
PSON#
Ground
-12 Volts
+3 Volts
ATX12V
®
+5 Volts
Ground
STRIKER
+5 Volts
Ground
+3 Volts
+3 Volts
STRIKER ATX power connectors
•
Make sure to remove the cap on the ATX12V connector before connecting
an 8-pin EPS +12V power plug.
•
Use only either a 4-pin ATX12V or an 8-pin EPS +12V power plug for the
ATX12V connector.
2-32
Chapter 2: Hardware information
•
For a fully configured system, we recommend that you use a power supply
unit (PSU) that complies with ATX 12 V Specification 2.0 (or later version)
and provides a minimum power of 550 W.
•
Do not forget to connect the 4-pin/8pin EATX12V power plug; otherwise,
the system will not boot.
•
Use of a PSU with a higher power output is recommended when
configuring a system with more power-consuming devices. The system
may become unstable or may not boot up if the power is inadequate.
•
If you want to use two high-end PCI Express x16 cards, use a PSU with
500 W to 600 W power or above to ensure the system stability.
Power supply requirements
Heavy Loading
CPU
SMF 3.2XE
DDR533
PCI-E VGA
SATA-HD
ESATA-HD
IDE-HD
CD-ROM
USB
256MB*4
Nvidia 7950GTX*2
6
2
1
1
2
0
0
PCI-E 1X
PCI
+12V-V2
(4 PIN)
+12V-V1
(24PIN)
+5V
+3.3V
VGA
+12V
HDD
+12V
HDD
+5V
+5VSB
Total
PSU
Io_max (A)
Io_rms (A)
Vout (V)
17
11.4
5.66
9.18
15.76
7.6
7.96
0.548
0.413
Po_max
(W)
12.35
11.93
7.68
11.9
4.42
5.022
28.42
8.52
3.316
30.44
10.74
11.42
3.32
11.95
90.82
5.26
Po_max (W)
202.81
135.66
179.98
4.993
5.054
678.18
(continued on the next page)
ASUS Striker
2-33
Power supply requirements
Normal Loading
CPU
PSC 3.73G 1066
DDR800
VGA
1GB*2
Nvidia 7800GTX*2
SATA-HD
ESATA-HD
IDE-HD
CD-ROM
USB
SATA*4
1
1
1
2
1
PCI
+12V-V2
(4 PIN)
+12V-V1
(24PIN)
+5V
+3.3V
VGA
+12V
HDD
+12V
HDD
+5V
+5VSB
Total
PSU
Io_max (A)
Io_rms (A)
Vout (V)
12.72
9.16
11.44
6.88
8.72
8.88
4.04
4.14
0.588
0.435
5.05
Po_max
(W)
8.1
11.9
5.6
5.026
34.58
8
3.32
5.86
11.57
2.14
11.99
48.44
2.92
5.04
11.94
151.88
Po_max (W)
136.14
28.95
102.74
20.87
2.97 526.56
Light Loading
CPU
PSC 3.8G EM64T
DDR667
VGA
512MB*2
Nvidia 7800GTX*1
SATA-HD
IDE-HD
CD-ROM
USB
SATA*2
1
1
1
1
PCI
+12V-V2
(4 PIN)
+12V-V1
(24PIN)
+5V
+3.3V
VGA
+12V
HDD
+12V
HDD
+5V
+5VSB
Total
PSU
Io_max (A)
Io_rms (A)
Vout (V)
12.36
8.98
7.6
8.44
3.24
4.28
4.34
3.58
0.556
0.396
5.066
2.82
Po_max
(W)
4.8
6.76
3.01
3.33
10.79
2.84
23.4
2.48
5.09
18.22
11.93
11.93
90.67
5.026
42.42
11.91
50.97
12.03
52.21
Po_max (W) 147.45
415.56
2-34
Chapter 2: Hardware information
9.
S/PDIF output connector (4-1 pin SPDIF_02)
This connector is for an additional Sony/Philips Digital Interface (S/PDIF)
port(s). Connect the S/PDIF module cable to this connector, then install the
module to a slot opening at the back of the system chassis.
®
STRIKER
SPDIF_O2
STRIKER SPDIF OUT connector
The S/PDIF module is purchased separately.
ASUS Striker
2-35
10. System panel connector (20-8 pin PANEL)
This connector supports several chassis-mounted functions.
PLED
SPEAKER
PANEL
®
IDE_LED
RESET
PWR
STRIKER
* Requires an ATX power supply.
STRIKER System panel connector
•
•
System power LED (2-pin PLED)
This 2-pin connector is for the system power LED. Connect the chassis
power LED cable to this connector. The system power LED lights up when
you turn on the system power, and blinks when the system is in sleep mode.
Hard disk drive activity LED (2-pin IDE_LED)
This 2-pin connector is for the HDD Activity LED. Connect the HDD Activity
LED cable to this connector. The IDE LED lights up or flashes when data is
read from or written to the HDD.
•
•
System warning speaker (4-pin SPEAKER)
This 4-pin connector is for the chassis-mounted system warning speaker. The
speaker allows you to hear system beeps and warnings.
ATX power button/soft-off button (2-pin PWR)
This connector is for the system power button. Pressing the power button
turns the system on or puts the system in sleep or soft-off mode depending
on the BIOS settings. Pressing the power switch for more than four seconds
while the system is ON turns the system OFF.
•
Reset button (2-pin RESET)
This 2-pin connector is for the chassis-mounted reset button for system
reboot without turning off the system power.
2-36
Chapter 2: Hardware information
ASUS Q-Connector (system panel)
You can use the ASUS Q-Connector to connect/disconnect chassis front panel
cables in a few steps. Refer to the instructions below to install the ASUS Q-
Connector.
1.
2.
3.
Connect the front panel cables to the
ASUS Q-Connector.
Refer to the labels on the Q-Connector
to know the detailed pin definitions, then
match them to the respective front panel
cable labels.
Install the ASUS Q-Connector to the
system panel connector, making sure
the orientation matches the labels on the
motherboard.
The front panel functions are now enabled.
The figure shows the Q-Connector properly
installed on the motherboard.
ASUS Striker
2-37
11. Thermal sensor cable connectors (2-pin OPT_TEMP1/2/3)
These connectors are for temperature monitoring. Connect the thermal
sensor cables to these connectors and place the other ends to the devices,
which you want to monitor temperature. The optional fan1~3 can work with
the temperature sensors for a better cooling effect.
Temperature2
®
OPT_TEMP2
Ground
STRIKER
Temperature1
OPT_TEMP1
Ground
OPT_TEMP3
STRIKER
Thermal sersor cable connectors
The Thermal sensor cables are purchased separately.
2.8.3
Onboard switches
Onboard switches allow you to fine-tune performance when working on a bare
or open-case system. This is ideal for overclockers and gamers who continually
change settings to enhance system performance.
1.
Clear CMOS switch
Press the clear CMOS switch to clear setup information when the system
hangs due to overclocking.
®
STRIKER
STRIKER CMOS switch
To prevent accidental pressing of the Clear CMOS switch, the CLRTC jumper
default setting disables the switch. See page 2-21 for details.
2-38
Chapter 2: Hardware information
2.
Power-on switch
Press the clear power-on switch to wake/power up the system.
®
STRIKER
STRIKER Power on switch
3.
Reset switch
Press the reset switch to reboot the system.
®
STRIKER
STRIKER Reset switch
ASUS Striker
2-39
2-40
Chapter 2: Hardware information
This chapter describes the power up
sequence, the vocal POST messages,
and ways of shutting down the system.
Powering up
3
Chapter summary
3
3.1
Starting up for the first time........................................................ 3-1
3.2
Turning off the computer............................................................. 3-2
ASUS Striker
3.1
Starting up for the first time
1.
2.
3.
After making all the connections, replace the system case cover.
Be sure that all switches are off.
Connect the power cord to the power connector at the back of the system
chassis.
4.
5.
Connect the power cord to a power outlet that is equipped with a surge
protector.
Turn on the devices in the following order:
a. Monitor
b. External SCSI devices (starting with the last device on the chain)
c. System power
6.
After applying power, the system power LED on the system front panel case
lights up. For systems withATX power supplies, the system LED lights up
when you press the ATX power button. If your monitor complies with “green”
standards or if it has a “power standby” feature, the monitor LED may light up
or switch between orange and green after the system LED turns on.
The system then runs the power-on self tests or POST. While the tests are
running, the BIOS beeps or additional messages appear on the screen.
If you do not see anything within 30 seconds from the time you turned on
the power, the system may have failed a power-on test. Check the jumper
settings and connections or call your retailer for assistance.
7.
At power on, hold down the <Delete> key to enter the BIOS Setup. Follow the
instructions in Chapter 4.
ASUS Striker
3-1
3.2
Turning off the computer
3.2.1
Using the OS shut down function
If you are using Windows® 2000:
1.
2.
Click the Start button then click Shut Down...
Make sure that the Shut Down option button is selected, then click the OK
button to shut down the computer.
3.
The power supply should turn off after Windows® shuts down.
If you are using Windows® XP or later version:
1.
2.
3.
Click the Start button then select Turn Off Computer.
Click the Turn Off button to shut down the computer.
The power supply should turn off after Windows® shuts down.
If you are using Windows® Vista:
1.
2.
Click the Start button then select ShutDown.
The power supply should turn off after Windows® shuts down.
3.2.2
Using the dual function power switch
While the system is ON, pressing the power switch for less than four seconds puts
the system to sleep mode or to soft-off mode, depending on the BIOS setting.
Pressing the power switch for more than four seconds lets the system enter the
soft-off mode regardless of the BIOS setting. Refer to section “4.6 Power Menu” in
Chapter 4 for details.
3-2
Chapter 3: Powering up
This chapter tells how to change
the system settings through the BIOS
Setup menus. Detailed descriptions
of the BIOS parameters are also
provided.
BIOS setup
4
Chapter summary
4
4.1
4.2
4.3
4.4
4.5
4.6
4.7
4.8
4.9
Managing and updating your BIOS ............................................ 4-1
BIOS setup program .................................................................. 4-10
Main menu .................................................................................. 4-14
Extreme Tweaker menu ............................................................. 4-19
Advanced menu ......................................................................... 4-26
Power menu................................................................................ 4-31
Boot menu .................................................................................. 4-38
Tools menu ................................................................................. 4-43
Exit menu.................................................................................... 4-49
ASUS Striker
4.1
Managing and updating your BIOS
The following utilities allow you to manage and update the motherboard Basic
Input/Output System (BIOS) setup.
1.
2.
ASUS Update (Updates the BIOS in Windows® environment.)
ASUS EZ Flash 2 (Updates the BIOS in DOS using a floppy disk or a USB
flash disk.)
3.
4.
Award BIOS Flash Utility (Updates the BIOS in DOS mode using a bootable
floppy disk.)
ASUS CrashFree BIOS 2 (Updates the BIOS using a bootable floppy disk or
the motherboard support DVD when the BIOS file fails or gets corrupted.)
Refer to the corresponding sections for details on these utilities.
Save a copy of the original motherboard BIOS file to a bootable floppy disk in
case you need to restore the BIOS in the future. Copy the original motherboard
BIOS using the ASUS Update or Award BIOS Flash utilities.
4.1.1
ASUS Update utility
The ASUS Update is a utility that allows you to manage, save, and update the
motherboard BIOS in Windows® environment. The ASUS Update utility allows you
to:
•
•
•
•
•
Save the current BIOS file
Download the latest BIOS file from the Internet
Update the BIOS from an updated BIOS file
Update the BIOS directly from the Internet, and
View the BIOS version information.
This utility is available in the support DVD that comes with the motherboard
package.
ASUS Update requires an Internet connection either through a network or an
Internet Service Provider (ISP).
Installing ASUS Update
To install ASUS Update:
1.
2.
Place the support DVD in the optical drive. The Drivers menu appears.
Click the Utilities tab, then click Install ASUS Update VX.XX.XX. See page
5-3 for the Utilities screen menu.
3.
The ASUS Update utility is copied to your system.
ASUS Striker
4-1
Quit all Windows® applications before you update the BIOS using this utility.
Updating the BIOS through the Internet
To update the BIOS through the Internet:
1.
Launch the ASUS Update utility from the Windows® desktop by clicking Start
> Programs > ASUS > ASUSUpdate > ASUSUpdate. The ASUS Update
main window appears.
2.
Select Update BIOS from the
Internet option from the drop-down
menu, then click Next.
3.
Select the ASUS FTP site nearest
you to avoid network traffic, or
click Auto Select. Click Next.
4-2
Chapter 4: BIOS setup
4.
5.
From the FTP site, select the BIOS
version that you wish to download.
Click Next.
Follow the screen instructions to
complete the update process.
The ASUS Update utility is
capable of updating itself through
the Internet. Always update the
utility to avail all its features.
Updating the BIOS through a BIOS file
To update the BIOS through a BIOS file:
1.
Launch the ASUS Update utility from the Windows® desktop by clicking Start
> Programs > ASUS > ASUSUpdate > ASUSUpdate. The ASUS Update
main window appears.
2.
Select Update BIOS from a file
option from the drop-down menu,
then click Next.
3.
Locate the BIOS file from the Open
window, then click Open.
4.
Follow the screen instructions to
complete the update process.
ASUS Striker
4-3
4.1.2
Creating a bootable floppy disk
1.
Do either one of the following to create a bootable floppy disk.
DOS environment
a. Insert a 1.44MB floppy disk into the drive.
b. At the DOS prompt, type format A:/Sthen press <Enter>.
Windows® XP environment
a. Insert a 1.44 MB floppy disk to the floppy disk drive.
b. Click Start from the Windows® desktop, then select My Computer.
c. Select the 3 1/2 Floppy Drive icon.
d. Click File from the menu, then select Format. A Format 3 1/2 Floppy
Disk window appears.
e. Select Create an MS-DOS startup disk from the format options field,
then click Start.
Windows® 2000 environment
To create a set of boot disks for Windows® 2000:
a. Insert a formatted, high density 1.44 MB floppy disk into the drive.
b. Insert the Windows® 2000 CD to the optical drive.
c. Click Start, then select Run.
d. From the Open field, type
D:\bootdisk\makeboot a:
assuming that D: is your optical drive.
e. Press <Enter>, then follow screen instructions to continue.
2.
Copy the original or the latest motherboard BIOS file to the bootable floppy
disk.
4-4
Chapter 4: BIOS setup
4.1.3
ASUS EZ Flash 2 utility
The ASUS EZ Flash 2 feature allows you to update the BIOS without having to go
through the long process of booting from a floppy disk and using a DOS-based
utility. The EZ Flash 2 utility is built-in the BIOS chip so it is accessible by pressing
<Alt> + <F2> during the Power-On Self Tests (POST).
To update the BIOS using EZ Flash 2:
1.
Visit the ASUS website (www.asus.com) to download the latest BIOS file for
the motherboard.
2.
Save the BIOS file to a floppy disk, then restart the system.
3.
You can launch the EZ Flash 2 by two methods.
(1) Insert the floppy disk/USB flash disk that contains the BIOS file to
the floppy disk drive or the USB port.
Press <Alt> + <F2> during POST to display the following.
ASUSTek EZ Flash 2 BIOS ROM Utility B312
FLASH TYPE: Winbond W39V080A 8Mb LPC
Current ROM
Update ROM
BOARD: Unknown
VER: Unknown
DATE: Unknown
BOARD: StrikerExtreme
VER: 0116
DATE: 10/30/2006
PATH: C:\
WIN98E
WIN98E
<DIR>
<DIR>
<DIR>
<DIR>
<DIR>
<DIR>
<DIR>
<DIR>
<DIR>
<DIR>
C
NETTERM
DRIVERS
RECYCLED
WUTEMP
NEWFOL~1
INSTALL
TEST-REB
MSDOWNLD.TMP
Note
[Enter] Select
[Tab]Switch
[S] Save
[ESC]Exit
[Up/Down/Home/End] Move
(2) Enter BIOS setup program. Go to the Tools menu to select EZ
Flash 2 and press <Enter> to enable it.
You can switch between drives by pressing <Tab> before the
correct file is found. Then press <Enter>.
4.
When the correct BIOS file is found, EZ Flash 2 performs the BIOS update
process and automatically reboots the system when down.
•
This function can support devices such as USB flash disk, hard disk, or
floppy disk with FAT32/16/12 format only.
•
Do not shut down or reset the system while updating the BIOS to
prevent system boot failure!
ASUS Striker
4-5
4.1.4
Updating the BIOS
The Basic Input/Output System (BIOS) can be updated using the AwardBIOS
Flash Utility. Follow these instructions to update the BIOS using this utility.
1.
Download the latest BIOS file from the ASUS web site. Unzip the file and
save it to a floppy disk.
Save only the updated BIOS file in the floppy disk to avoid loading the wrong
BIOS file.
2.
3.
4.
5.
Copy the AwardBIOS Flash Utility (awdflash.exe) from the Software folder of
the support DVD to the floppy disk with the latest BIOS file.
Boot the system in DOS mode using the bootable floppy disk you created
earlier.
When the A:> appears, replace the bootable floppy disk with the floppy disk
containing the new BIOS file and the Award BIOS Flash Utility.
At the prompt, type
awdflash then press
AwardBIOS Flash Utility for ASUS V1.18
(C) Phoenix Technologies Ltd. All Rights Reserved
<Enter>. The Award
BIOS Flash Utility screen
appears.
For C55XEMCP55PXE-StrikerE-00
Flash Type - Unknown Flash
DATE:10/30/2006
File Name to Program:
Message: Please input File Name!
6.
Type the BIOS file name in
the File Name to Program
field, then press <Enter>.
AwardBIOS Flash Utility for ASUS V1.18
(C) Phoenix Technologies Ltd. All Rights Reserved
For C55XEMCP55PXE-StrikerE-00
Flash Type - Unknown Flash
DATE:10/30/2006
File Name to Program: 0113.bin
Message: Do You Want To Save Bios (Y/N)
4-6
Chapter 4: BIOS setup
7.
8.
Press <N> when the utility prompts you to save the current BIOS file. The
following screen appears.
The utility verifies the BIOS
AwardBIOS Flash Utility for ASUS V1.18
(C) Phoenix Technologies Ltd. All Rights Reserved
file in the floppy disk and
starts flashing the BIOS file.
For C55XEMCP55PXE-StrikerE-00
Flash Type - Unknown Flash
DATE:10/30/2006
File Name to Program: 0116.bin
Programming Flash Memory - OFE00 OK
Write OK
No Update
Write Fail
Warning: Don’t Turn Off Power Or Reset System!
Do not turn off or reset the system during the flashing process!
9.
The utility displays a
AwardBIOS Flash Utility for ASUS V1.18
(C) Phoenix Technologies Ltd. All Rights Reserved
Flashing Complete
message indicating that
you have successfully
flashed the BIOS file.
Remove the floppy disk
then press <F1> to restart
the system.
For C55XEMCP55PXE-StrikerE-00
Flash Type - Unknown Flash
DATE:10/30/2006
File Name to Program: 0116.bin
Flashing Complete
Press <F1> to Continue
Write OK
F1 Reset
No Update
Write Fail
ASUS Striker
4-7
4.1.5
Saving the current BIOS file
You can use the AwardBIOS Flash Utility to save the current BIOS file. You can
load the current BIOS file when the BIOS file gets corrupted during the flashing
process.
Make sure that the floppy disk has enough disk space to save the file.
To save the current BIOS file using the AwardBIOS Flash Utility:
1.
2.
Follow steps 1 to 6 of the
previous section.
AwardBIOS Flash Utility for ASUS V1.18
(C) Phoenix Technologies Ltd. All Rights Reserved
For C55XEMCP55PXE-StrikerE-00
Flash Type - Unknown Flash
DATE:10/30/2006
Press <Y> when the utility
prompts you to save the
current BIOS file. The
File Name to Program: 0116.bin
Save current BIOS as:
following screen appears.
Message:
3.
Type a filename for the
current BIOS file in the
Save current BIOS as field,
then press <Enter>.
AwardBIOS Flash Utility for ASUS V1.18
(C) Phoenix Technologies Ltd. All Rights Reserved
For C55XEMCP55PXE-StrikerE-00
Flash Type - Unknown Flash
File Name to Program:
Checksum: D800H
DATE:10/30/2006
Save current BIOS as: old.bin
Message: Please Wait!
4.
The utility saves the
AwardBIOS Flash Utility for ASUS V1.18
(C) Phoenix Technologies Ltd. All Rights Reserved
current BIOS file to the
floppy disk, then returns to
the BIOS flashing process.
For C55XEMCP55PXE-StrikerE-00
Flash Type - Unknown Flash
DATE:10/30/2006
File Name to Program: 0115.bin
Now Backup System BIOS to
File!
Message: Please Wait!
4-8
Chapter 4: BIOS setup
4.1.6
ASUS CrashFree BIOS 2 utility
The ASUS CrashFree BIOS 2 is an auto recovery tool that allows you to restore
the BIOS file when it fails or gets corrupted during the updating process. You can
update a corrupted BIOS file using the motherboard support DVD or the floppy disk
that contains the updated BIOS file.
•
•
Prepare the motherboard support DVD or the floppy disk containing
the updated motherboard BIOS before using this utility.
Make sure that you rename the original or updatedd BIOS file in the
floppy disk to STRIKER.BIN.
Recovering the BIOS from the support DVD
To recover the BIOS from the support DVD:
1.
2.
3.
Turn on the system.
Insert the motherboard support DVD to the optical drive.
The utility displays the following message and automatically checks the DVD
for the BIOS file.
Award BootBlock BIOS v1.0
Copyright (C) 2000, Award Software, Inc.
BIOS ROM checksum error,
Detecting IDE ATAPI device...
When found, the utility reads the BIOS file and starts flashing the corrupted
BIOS file.
Award BootBlock BIOS v1.0
Copyright (C) 2000, Award Software, Inc.
BIOS ROM checksum error,
Detecting IDE ATAPI device...
Found CDROM, try to Boot from it...Pass
DO NOT shut down or reset the system while updating the BIOS! Doing so can
cause system boot failure!
4.
Restart the system after the utility completes the updating process.
ASUS Striker
4-9
4.2
BIOS setup program
This motherboard supports a programmable Low-Pin Count (LPC) chip that you
can update using the provided utility described in section “4.1 Managing and
updating your BIOS.”
Use the BIOS Setup program when you are installing a motherboard, reconfiguring
your system, or prompted to“Run Setup.” This section explains how to configure
your system using this utility.
Even if you are not prompted to use the Setup program, you can change the
configuration of your computer in the future. For example, you can enable the
security password feature or change the power management settings. This
requires you to reconfigure your system using the BIOS Setup program so that the
computer can recognize these changes and record them in the CMOS RAM of the
LPC chip.
The LPC chip on the motherboard stores the Setup utility. When you start up the
computer, the system provides you with the opportunity to run this program. Press
<Del> during the Power-On Self-Test (POST) to enter the Setup utility; otherwise,
POST continues with its test routines.
If you wish to enter Setup after POST, restart the system by pressing
<Ctrl+Alt+Delete>, or by pressing the reset button on the system chassis. You can
also restart by turning the system off and then back on. Do this last option only if
the first two failed.
The Setup program is designed to make it as easy to use as possible. Being a
menu-driven program, it lets you scroll through the various sub-menus and make
your selections from the available options using the navigation keys.
•
The default BIOS settings for this motherboard apply for most conditions
to ensure optimum performance. If the system becomes unstable after
changing any BIOS settings, load the default settings to ensure system
compatibility and stability. Select the Load Default Settings item under the
Exit Menu. See section “4.9 Exit Menu.”
•
The BIOS setup screens shown in this section are for reference purposes
only, and may not exactly match what you see on your screen.
•
Visit the ASUS website (www.asus.com) to download the latest BIOS file for
this motherboard.
4-10
Chapter 4: BIOS setup
4.2.1
BIOS menu screen
Menu items
Menu bar
Configuration fields
General help
Phoenix-Award BIOS CMOS Setup Utility
Advanced Power Boot Tools Exit
Main
Extreme Tweaker
System Time
System Date
Language
15 : 30 : 36
Sat, Jan 21 2006
[English]
Select Menu
Item Specific Help
Legacy Diskette A:
[1.44M, 3.5 in.]
Change the day, month,
year and century.
Primary IDE Master
[ST321122A]
[ASUS CDS520/A]
[None]
Primary IDE Slave
SATA1
SATA2
[None]
SATA3
[None]
SATA4
[None]
SATA5
[None]
SATA6
[None]
HDD SMART Monitoring
[Disabled]
Installed Memory
Usable Memory
512MB
511MB
F1:Help
ESC: Exit
↑↓ : Select Item
→←: Select Menu
-/+: Change Value
Enter: Select SubMenu
F5: Setup Defaults
F10: Save and Exit
Sub-menu items
Legend bar
4.2.2
Menu bar
The menu bar on top of the screen has the following main items:
Main
For changing the basic system configuration
Extreme Tweaker For changing the overclocking settings
Advanced
Power
For changing the advanced system settings
For changing the advanced power management (APM)
configuration
Boot
Tools
Exit
For changing the system boot configuration
For configuring options for special functions
For selecting the exit options and loading default
settings
To select an item on the menu bar, press the right or left arrow key on the keyboard
until the desired item is highlighted.
•
•
The BIOS setup screens shown in this chapter are for reference purposes
only, and may not exactly match what you see on your screen.
Visit the ASUS website (www.asus.com) to download the latest BIOS
information.
ASUS Striker
4-11
4.2.3
Legend bar
At the bottom of the Setup screen is a legend bar. The keys in the legend bar allow
you to navigate through the various setup menus. The following table lists the keys
found in the legend bar with their corresponding functions.
Navigation Key
<F1>
Function
Displays the General Help screen
Loads setup default values
<F5>
<Esc>
Exits the BIOS setup or returns to the main menu from a
sub‑menu
Left or Right arrow
Up or Down arrow
Page Down or – (minus)
Page Up or + (plus)
<Enter>
Selects the menu item to the left or right
Moves the highlight up or down between fields
Scrolls backward through the values for the highlighted field
Scrolls forward through the values for the highlighted field
Brings up a selection menu for the highlighted field
Saves changes and exit
<F10>
4.2.4
Menu items
The highlighted item on the menu bar displays the specific items for that menu.
For example, selecting Main shows the Main menu items.
The other items (Advanced, Power, Boot, and Exit) on the menu bar have their
respective menu items.
4.2.5
Sub-menu items
A solid triangle before each item on any menu screen means that the item has a
sub-menu. To display the sub-menu, select the item and press <Enter>.
4.2.6
Configuration fields
These fields show the values for the menu items. If an item is user-configurable,
you can change the value of the field opposite the item. You cannot select an item
that is not user-configurable.
A configurable field is enclosed in brackets, and is highlighted when selected. To
change the value of a field, select it then press <Enter> to display a list of options.
Refer to “4.2.7 Pop-up window.”
4-12
Chapter 4: BIOS setup
4.2.7
Pop-up window
Select a menu item then press <Enter> to display a pop-up window with the
configuration options for that item.
Phoenix-Award BIOS CMOS Setup Utility
Main
Extreme Tweaker
Advanced
Power
Boot
Tools
Exit
System Time
System Date
Language
15 : 30 : 36
Thu, Apr 6 2006
[English]
Select Menu
Legacy Diskette A:
[1.44M, 3.5 in.]
Item Specific Help
Legacy Diskette A:
Primary IDE Mast
cifies the capacity and
sical size of diskette
ve A.
Primary IDE Slav
SATA1
Disabled
720K , 3.5 in.
1.44M, 3.5 in.
..... [ ]
..... [ ]
SATA2
..... [ ]
SATA3
SATA4
SATA5
SATA6
HDD SMART Monito
↑↓ :Move ENTER:Accept ESC:Abort
Installed Memory
Usable Memory
F1:Help
ESC: Exit
↑↓ : Select Item
→←: Select Menu
-/+: Change Value
Enter: Select SubMenu
F5: Setup Defaults
F10: Save and Exit
Pop-up menu
4.2.8
General help
At the top right corner of the menu screen is a brief description of the selected
item.
ASUS Striker
4-13
4.3
Main menu
When you enter the BIOS Setup program, the Main menu screen appears, giving
you an overview of the basic system information.
Refer to section “4.2.1 BIOS menu screen” for information on the menu screen
items and how to navigate through them.
Phoenix-Award BIOS CMOS Setup Utility
Main
Extreme Tweaker
Advanced
Power
Boot
Tools
Exit
System Time
System Date
Language
15 : 30 : 36
Sat, Jan 21 2006
[English]
Select Menu
Item Specific Help
Legacy Diskette A:
[1.44M, 3.5 in.]
Change the day, month,
year and century.
Primary IDE Master
[ST321122A]
[ASUS CDS520/A]
[None]
Primary IDE Slave
SATA1
SATA2
[None]
SATA3
[None]
SATA4
[None]
SATA5
[None]
SATA6
[None]
HDD SMART Monitoring
[Disabled]
Installed Memory
Usable Memory
512MB
511MB
F1:Help
ESC: Exit
↑↓ : Select Item
→←: Select Menu
-/+: Change Value
Enter: Select SubMenu
F5: Setup Defaults
F10: Save and Exit
4.3.1
System Time [xx:xx:xx]
Allows you to set the system time.
4.3.2
System Date [Day xx/xx/xxxx]
Allows you to set the system date.
4.3.3
Language [English]
Allows you to choose the BIOS language version from the options. Configuration
options: [English] [French] [Deutsch] [Chinese (Trad.)] [Chinese (Simp.)]
[Japanese]
4.3.4
Legacy Diskette A [1.44M, 3.5 in.]
Sets the type of floppy drive installed.
Configuration options: [Disabled] [720K , 3.5 in.] [1.44M, 3.5 in.]
4-14
Chapter 4: BIOS setup
4.3.5
Primary IDE Master/Slave
While entering Setup, the BIOS automatically detects the presence of IDE devices.
There is a separate sub-menu for each IDE device. Select a device item then
press <Enter> to display the IDE device information.
Phoenix-Award BIOS CMOS Setup Utility
Main
Primary IDE Master
Select Menu
PIO Mode
UDMA Mode
[Auto]
[Auto]
Item Specific Help
Set a PIO mode for IDE
device. Mode0 through 4
for successive increase in
performance.
Primary IDE Master
Access Mode
[Auto]
[Auto]
Capacity
82 GB
Cylinder
Head
39420
16
Sector
255
Transfer Mode
UDMA 5
F1:Help
ESC: Exit
↑↓ : Select Item
→←: Select Menu
-/+: Change Value
Enter: Select SubMenu
F5: Setup Defaults
F10: Save and Exit
The BIOS automatically detects the values opposite the dimmed items
(Capacity, Cylinder, Head, Sector and Transfer Mode). These values are not
user-configurable. These items show N/A if no IDE device is installed in the
system.
PIO Mode [Auto]
Sets the PIO mode for the IDE device.
Configuration options: [Auto] [Mode 0] [Mode 1] [Mode 2] [Mode 3] [Mode 4]
UDMA Mode [Auto]
Disables or sets the UDMA mode. Configuration options: [Disable] [Auto]
Primary IDE Master/Slave [Auto]
Select [Auto] to automatically detect an IDE hard disk drive. If automatic detection
is successful, the BIOS automatically fills in the correct values for the remaining
fields on this sub-menu. If the hard disk was already formatted on a previous
system, the setup BIOS may detect incorrect parameters. Select [Manual] to
manually enter the IDE hard disk drive parameters. If no drive is installed select
[None]. Configuration options: [None] [Auto] [Manual]
ASUS Striker
4-15
Access Mode [Auto]
The default [Auto] allows automatic detection of an IDE hard disk drive.
Select [CHS] for this item if you set the IDE Primary Master/Slave to [Manual].
Configuration options: [CHS] [LBA] [Large] [Auto]
Before attempting to configure a hard disk drive, make sure you have the
correct configuration information supplied by the drive manufacturer. Incorrect
settings may cause the system to fail to recognize the installed hard disk.
Capacity
Displays the auto-detected hard disk capacity. This item is not configurable.
Cylinder
Shows the number of the hard disk cylinders. This item is not configurable.
Head
Shows the number of the hard disk read/write heads. This item is not configurable.
Sector
Shows the number of sectors per track. This item is not configurable.
Transfer Mode
Shows the Transfer mode. This item is not configurable.
After entering the IDE hard disk drive information into BIOS, use a disk utility,
such as FDISK, to partition and format new IDE hard disk drives. This is
necessary so that you can write or read data from the hard disk. Make sure to
set the partition of the Primary IDE hard disk drives to active.
4-16
Chapter 4: BIOS setup
4.3.6
SATA1/2/3/4/5/6
While entering Setup, the BIOS automatically detects the presence of Serial ATA
devices. There is a separate sub-menu for each SATA device. Select a device item
then press <Enter> to display the SATA device information.
Phoenix-Award BIOS CMOS Setup Utility
Main
SATA1
Select Menu
Extended IDE Drive
Access Mode
[Auto]
[Auto]
Item Specific Help
Selects the type of fixed
disk connected to the
system.
Capacity
0 MB
Cylinder
Head
Landing Zone
Sector
0
0
0
0
F1:Help
ESC: Exit
↑↓ : Select Item
→←: Select Menu
-/+: Change Value
Enter: Select SubMenu
F5: Setup Defaults
F10: Save and Exit
The BIOS automatically detects the values opposite the dimmed items (Capacity,
Cylinder, Head, Landing Zone and Sector). These values are not user-
configurable. These items show 0 if no SATA device is installed in the system.
Extended IDE Drive [Auto]
Selects the type of fixed disk connected to the system.
Configuration options: [None] [Auto]
Access Mode [Auto]
Sets the sector addressing mode. Configuration options: [Large] [Auto]
Before attempting to configure a hard disk drive, make sure you have the
correct configuration information supplied by the drive manufacturer. Incorrect
settings may cause the system to fail to recognize the installed hard disk.
Capacity
Displays the auto-detected hard disk capacity. This item is not configurable.
Cylinder
Shows the number of the hard disk cylinders. This item is not configurable.
ASUS Striker
4-17
Head
Shows the number of the hard disk read/write heads. This item is not configurable.
Landing Zone
Shows the number of landing zone per track. This item is not configurable.
Sector
Shows the number of sectors per track. This item is not configurable.
After entering the IDE hard disk drive information into BIOS, use a disk utility,
such as FDISK, to partition and format new IDE hard disk drives. This is
necessary so that you can write or read data from the hard disk. Make sure to
set the partition of the Primary IDE hard disk drives to active.
4.3.7
HDD SMART Monitoring [Disabled]
Allows you to enable or disable the HDD Self-Monitoring Analysis and Reporting
Technology (SMART) feature. Configuration options: [Disabled] [Enabled]
4.3.8
Installed Memory [xxx MB]
Shows the size of installed memory.
4.3.9
Usable Memory [XXX MB]
Shows the size of usable memory.
4-18
Chapter 4: BIOS setup
4.4
Extreme Tweaker menu
The Extreme menu items allow you to configure overclocking-related items.
Take caution when changing the settings of the Extreme menu items. Incorrect
field values can cause the system to malfunction.
Phoenix-Award BIOS CMOS Setup Utility
Main
Extreme Tweaker
Advanced
Power
Boot
Tools
Exit
AI Tuning
[Auto]
Select Menu
x
x
x
x
Overclock Options
N.O.S. Option
System Clocks
FSB & Memory Config
Overclocking
Disabled
Item Specific Help
Press [Enter] to select
overclock profile.
Over Voltage
NVIDIA GPU EX
[Disabled]
Not Detected
x
SLI-Ready Memory
F1:Help
↑↓ : Select Item
-/+: Change Value
Enter: Select SubMenu
F5: Setup Defaults
F10: Save and Exit
ESC: Exit →←: Select Menu
4.4.1
AI Tuning [Auto]
Allows selection of CPU overclocking options to achieve desired CPU internal
frequency. Selct either one of the preset overclocking configuration options:
Manual
Allows you to individually set overclocking parameters.
Loads the optimal settings for the system.
Auto
Standard
AI Overclock
Loads the standard settings for the system.
Loads overclocking profiles with optimal parameters for
stability when overclocking.
AI N.O.S.
The ASUS Non-delay Overclocking System feature
intelligently determines the system load and automatically
boosts the performance for the most demanding tasks.
The following item becomes user-configurable when you set AI Tuning to
AI Overclock
[
]
Overclock Options [Disabled]
Allows you to set the overclocking options.
Configuration options: [Disabled] [Overclock 5%] [Overclock 10%] [Overclock 15%]
[Overclock 20%] [FSB 960/800] [FSB 1280/800] [FSB 1000/667] [FSB 1333/667]
[FSB 1200/800]
ASUS Striker
4-19
The following items become user-configurable when you set AI Tuning to
Manual].
[
System Clocks
This sub-menu allows you to adjust the system frequency-related items. Select an
item, then press <Enter> to edit.
Phoenix-Award BIOS CMOS Setup Utility
Extreme Tweaker
System Clocks
Select Menu
Item Specific Help
PCIEX16_1 Frequency (MHz)
[100]
[100]
[100]
[Auto]
PCIEX16_2 Frequency (MHz)
PCIEX16_3 Frequency (MHz)
SPP <-> MCP Ref Clock, MHz
Set C55 PCIE Overclock
PCIEX16_1 Frequency (MHz) [100]
Allows you to set the PCIEX16_1 overclocking frequency.
Configuration options: [100 MHz]~[200 MHz]
PCIEX16_2 Frequency (MHz) [100]
Allows you to set the PCIEX16_2 overclocking frequency.
Configuration options: [100 MHz]~[200 MHz]
PCIEX16_3 Frequency (MHz) [100]
Allows you to set the PCIEX16_3 overclocking frequency.
Configuration options: [100 MHz]~[200 MHz]
SPP <-> MCP Ref Clock, MHz [Auto]
Configuration options: [Auto] [200.0 MHz] [200.5 MHz] [201.0 MHz] [201.5
MHz]...[500.0 MHz]
4-20
Chapter 4: BIOS setup
FSB & Memory Config
This sub-menu allows you to adjust the system frequency-related items. Select an
item, then press <Enter> to edit.
Phoenix-Award BIOS CMOS Setup Utility
Extreme Tweaker
Select Menu
FSB & Memory Config
Item Specific Help
FSB - Memory Clock Mode
FSB - Memory Ratio
FSB (QDR), MHz
[Linked]
[Auto]
[800]
800.0
Linked
667
System clock mode
Actual FSB (QDR), MHz
MEM (DDR), MHz
[Optimal]
Set FSB and memory speed
automatically.
x
Actual MEM (DDR), MHz
[Linked]
Enter FSB Speed manually.
Memory Speed changes
proportionally.
F1:Help
↑↓ : Select Item
-/+: Change Value
Enter: Select SubMenu
F5: Setup Defaults
F10: Save and Exit
ESC: Exit →←: Select Menu
FSB - Memory Clock Mode [Auto]
Allows you to set the system clock mode.
Configuration options: [Auto] [Linked] [Unlinked]
The following items become user-configurable when you set the FSB-Memory
Clock Mode item to [Linked].
FSB - Memory Ratio [Auto]
Configuration options: [Auto] [1:1] [5:4] [3:2] [Sync Mode]
FSB (QDR), MHz [800]
Configuration options: [533 MHz]~[3000 MHz]
The following item becomes user-configurable when you set the FSB-Memory
Clock Mode item to [Unlinked].
FSB (QDR), MHz [800]
Configuration options: [533]~[3000]
MEM (DDR), MHz [667]
Configuration options: [400]~[1400]
ASUS Striker
4-21
4.4.2
Overclocking
This sub-menu allows you to adjust the system frequency-related items. Select an
item, then press <Enter> to edit.
Phoenix-Award BIOS CMOS Setup Utility
Extreme Tweaker
Overclocking
Select Menu
CPU Type
Genuine Intel (R) CPU
Item Specific Help
CPU Speed 2.80GHz
Cache RAM 1024K x2
CPU Multiplier
[17]
Memory Timing Setting
Spread Spectrum Control
Intel SpeedStep
[Disabled]
[Auto]
CPU Internal Thermal Control
TM2 Bus Ratio
X
X
12 X
TM2 Bus VID
1.2000V
Limit CPUID MaxVal
EnhancedC1 (C1E)
[Disabled]
[Disabled]
[Enabled]
Execute Disable Bit
Enhanced Intel SpeedStep(tm) Tech. [Disabled]
Hyper-Threading Technology
LDT Frequency
[Enabled]
[5x]
F1:Help
ESC: Exit
↑↓ : Select Item
→←: Select Menu
-/+: Change Value
Enter: Select Sub-menu
F5: Setup Defaults
F10: Save and Exit
CPU Multiplier [17]
Configuration options: [6]~[50]
Memory Timing Setting
Phoenix-Award BIOS CMOS Setup Utility
Extreme Tweaker
Memory Timing Setting
Select Menu
tCL (CAS Latency)
[Auto]
[Auto]
[Auto]
[Auto]
Item Specific Help
tRCD
tRAS
Command Per Clock (CMD)
** Advanced Memory Settings **
tRRD
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
tRC
tWR
tWTR
tREF
Async Latency
tCL (CAS Latency) [Auto]
Configuration options: [Auto] [1] [2] [3] [4] [5] [6]
tRCD [Auto]
Configuration options: [Auto] [1] [2] [3] [4] [5] [6] [7]
tRP [Auto]
Configuration options: [Auto] [1] [2] [3] [4] [5] [6] [7]
tRAS [Auto]
Configuration options: [Auto] [1] [2] [3] [4] [5] [6] [7]...[31]
4-22
Chapter 4: BIOS setup
Command Per Clock (CMD) [Auto]
Configuration options: [Auto] [1 clock] [2 clock]
tRRD [Auto]
Configuration options: [Auto] [1] [2] [3] [4] [5] [6] [7]...[15]
tRC [Auto]
Configuration options: [Auto] [1] [2] [3] [4] [5] [6] [7]...[31]
tWR [Auto]
Configuration options: [Auto] [1] [2] [3] [4] [5] [6] [7]
tWTR [Auto]
Configuration options: [Auto] [1] [2] [3] [4] [5] [6] [7]...[15]
tREF [Auto]
Configuration options: [Auto] [1] [2]
Async Latency [Auto]
Configuration options: [Auto] [1.00nS] [1.25nS] [1.50nS] [1.75nS] [2.00nS]
[2.25nS] [2.50nS]
Spread Spectrum Control
Phoenix-Award BIOS CMOS Setup Utility
Extreme Tweaker
Spread Spectrum Control
Select Menu
CPU Spread Spectrum
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
Item Specific Help
PCIE Spread Spectrum
MCP PCIE Spread Spectrum
SATA Spread Spectrum
LDT Spread Spectrum
CPU Spread Spectrum [Auto]
Configuration options: [Auto] [Disabled]
PCIE Spread Spectrum [Auto]
Configuration options: [Auto] [Disabled]
MCP PCIE Spread Spectrum [Auto]
Configuration options: [Auto] [Disabled]
SATA Spread Spectrum [Disabled]
Configuration options: [Disabled] [Auto]
LDT Spread Spectrum [Disabled]
Configuration options: [Auto] [Disabled]
ASUS Striker
4-23
Intel SpeedStep [Disabled]
This item is user-configurable only when you set [AI Tuning] to [Standard], [Auto],
or [AI N.O.S.]. Configuration options: [Auto] [Disabled]
CPU Internal Thermal Control [Auto]
Configuration options: [Auto] [Disabled]
Limit CPUID MaxVal [Disabled]
Configuration options: [Disabled] [Enabled]
Enhanced C1 (CIE) [Disabled]
Configuration options: [Disabled] [Enabled]
Execute Disable Bit [Enabled]
Configuration options: [Disabled] [Enabled]
Enhanced Intel SpeedStep(tm) Tech. [Disabled]
Configuration options: [Disabled] [Enabled]
Hyper-Threading Technology [Enabled]
Configuration options: [Disabled] [Enabled]
LDT Frequency [5x]
Configuration options: [1x] [2x] [3x] [4x] [5x] [6x] [7x] [8x]
4.4.3
Over Voltage
This sub-menu allows you to adjust the system voltage-related items. Select an
item, then press <Enter> to edit.
Phoenix-Award BIOS CMOS Setup Utility
Extreme Tweaker
Over Voltage
Select Menu
VCore Voltage
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
Item Specific Help
Memory Voltage
1.2V HT Voltage
NB Core Voltage
SB Core Voltage
CPU VTT Voltage
Set CPU VID to desired
voltage, but it will cause
other CPU power management
feature such as C1E, EIST,
and TM2) fail to control
CPU VID. Select [Auto] to
let CPU VID keep original
value.
DDR2 Controller Ref Voltage
DDR2 Channel A Ref Voltage
DDR2 Channel B Ref Voltage
VCore Voltage [Auto]
Configuration options: [Auto] [1.90000V] [1.89375V] [1.88750V] [1.88125V]
[1.87500V]...[0.83750V] [0.83125V]
Memory Voltage [Auto]
Configuration options: [Auto] [1.850V] [1.875V] [1.900V]...[3.400V] [3.425V]
4-24
Chapter 4: BIOS setup
1.2V HT Voltage [Auto]
Configuration options: [Auto] [1.20V] [1.25V] [1.30V]...[1.90V] [1.95V]
NB Core Voltage [Auto]
Configuration options: [Auto] [1.20V] [1.25V] [1.30V]...[2.70V] [2.75V]
SB Core Voltage [Auto]
Configuration options: [Auto] [1.50V] [1.55V] [1.60V] [1.65V] [1.70V] [1.75V]
[1.80V] [1.85V]
CPU VTT Voltage [Auto]
Configuration options: [Auto] [1.20V] [1.25V] [1.30V] [1.35V]...[1.50V] [1.55V]
DDRII Controller Ref Voltage [Auto]
Configuration options: [Auto] [DDR2_Vol/2] [DDR2_Vol/2-30mv] [DDR2_
Vol/2-20mv] [DDR2_Vol/2-10mv] [DDR2_Vol/2+10mv] [DDR2_Vol/2+20mv]
[DDR2_Vol/2+30mv]
DDR2 Channel A Ref Voltage / DDR2 Channel B Ref Voltage [Auto]
Allows you to set the DDR2 Controller/ChannelA/B Ref voltage.
Configuration options: Configuration options: [Auto] [DDR2_Vol/2] [DDR2_
Vol/2-30mv] [DDR2_Vol/2-20mv] [DDR2_Vol/2-10mv] [DDR2_Vol/2+10mv]
[DDR2_Vol/2+20mv] [DDR2_Vol/2+30mv]
4.4.4
NVIDIA GPU Ex [Disabled]
Enables or disables with the optimized NVIDIA Ex graphics driver.
Configuration options: [Auto] [Disabled]
4.4.5
SLI-Ready Memory [Disabled]
Allows you to select the SPD profile for SLI-Ready memory modules. The
configuration options may vary depending on the type of module you installed.
Configuration options: [Disabled] [Optimal] [High Performance] [High Frequency]
The following item becomes user-configurable when SLI-Ready Memory is set
to Enabled.
4.4.6
SLI-Ready Memory CPUOC [CPUOC 0%]
Configuration options: [CPUOC 0%] [CPUOC 1%]~[CPUOC 14%] [CPUOC MAX]
ASUS Striker
4-25
4.5
Advanced menu
The Advanced menu items allow you to change the settings for system devices.
Take caution when changing the settings of the Advanced menu items. Incorrect
field values can cause the system to malfunction.
Phoenix-Award BIOS CMOS Setup Utility
Main
Extreme Tweaker
Advanced
Power
Boot
Tools
Exit
AI NET2
PCIPnP
Onboard Device Configuration
USB Configuration
Select Menu
Item Specific Help
Press [Enter] to set.
F1:Help
↑↓ : Select Item
-/+: Change Value
Enter: Select SubMenu
F5: Setup Defaults
F10: Save and Exit
ESC: Exit →←: Select Menu
4.5.1
AI NET2
Phoenix-Award BIOS CMOS Setup Utility
Advanced
AI NET2
Select Menu
POST Check LAN Cable
POST Check LAN2 Cable
[Disabled]
[Disabled]
Item Specific Help
Enable or Disable LAN
cable check during POST.
Pair
Status
Length
LAN1(1-2)
LAN1(3-6)
LAN1(4-5)
LAN1(7-8)
Open
Open
Open
Open
N/A
N/A
N/A
N/A
LAN2(1-2)
LAN2(3-6)
LAN2(4-5)
LAN2(7-8)
Open
Open
Open
Open
N/A
N/A
N/A
N/A
F1:Help
ESC: Exit
↑↓ : Select Item
→←: Select Menu
-/+: Change Value
Enter: Select Sub-menu
F5: Setup Defaults
F10: Save and Exit
POST Check LAN Cable [Disabled]
POST Check LAN2 Cable[Disabled]
Enables or disables checking of the LAN/LAN2 cable during the Power-On
Self-Test (POST). Configuration options: [Disabled] [Enabled]
4-26
Chapter 4: BIOS setup
4.5.2
PCIPnP
Phoenix-Award BIOS CMOS Setup Utility
Advanced
PCIPnP
Select Menu
Plug & Play O/S
Primary Display Adapter
[No]
[PCI]
Item Specific Help
Select Yes if you are using
a Plug and Play capable
operating system. Select
No if you need the BIOS to
configure non-boot devices.
Plug & Play O/S [No]
When set to [No], the BIOS configures all the devices in the system. When set to
[Yes] and if you install a Plug and Play operating system, the operating system
configures the Plug and Play devices not required for boot. Configuration options:
[No] [Yes]
Primary Display Adapter [PCI]
Allows you to select the graphics controller to use as the primary boot device.
Configuration options: [PCI] [PCI-E]
ASUS Striker
4-27
4.5.3
Onboard Device Configuration
Phoenix-Award BIOS CMOS Setup Utility
Advanced
Onboard Device Configuration
Select Menu
IDE Function Setup
Item Specific Help
Serial-ATA Configuration
HD Audio
[Auto]
Front Panel Support Type
Onboard 1st nVidia LAN
Onboard 2nd nVidia LAN
Onboard LAN Boot ROM
Onboard 1394
LCD Poster Backlight
LCD Poster Mode
LCD Poster String
[AC97]
[Enabled]
[Enabled]
[Disabled]
[Enabled]
[Disabled]
[Current Time]
x
F1:Help
ESC: Exit
↑↓ : Select Item
→←: Select Menu
-/+: Change Value
F5: Setup Defaults
Enter: Select SubMenu F10: Save and Exit
IDE Function Setup
This sub-menu contains IDE function-related items. Select an item then press
<Enter> to edit.
Phoenix-Award BIOS CMOS Setup Utility
Advanced
IDE Function Setup
Select Menu
OnChip IDE Channel0
IDE DMA transfer access
IDE Prefetch Mode
[Enabled]
[Enabled]
[Enabled]
Item Specific Help
OnChip IDE Channel0 [Enabled]
Allows you to enable or disable the onchip IDE channel 0 controller .
Configuration options: [Disabled] [Enabled]
IDE DMA transfer access [Enabled]
Allows you to enable or disable the IDE DMA transfer access.
Configuration options: [Disabled] [Enabled]
IDE Prefetch Mode [Enabled]
Allows you to enable or disable the IDE PIO read prefetch mode.
Configuration options: [Disabled] [Enabled]
4-28
Chapter 4: BIOS setup
Serial-ATA Configuration
This sub-menu allows you to change Serial ATA settings. Select an item then press
<Enter> to edit.
Phoenix-Award BIOS CMOS Setup Utility
Advanced
Serial-ATA Configuration
Select Menu
Serial-ATA Controller
RAID Enabled
SATA1
SATA2
SATA3
SATA4
SATA5
SATA6
[Enabled]
[Disabled]
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Item Specific Help
x
x
x
x
x
x
RAID
RAID
RAID
RAID
RAID
RAID
Serial-ATA Controller [Enabled]
Allows you to enable or disable the onboard Serial ATA controller.
Configuration options: [Disabled] [Enabled]
RAID Enabled [Disabled]
Enables or disables the onboard RAID controller. When set to [Enabled],
the succeeding items become user-configurable. Configuration options:
[Disabled] [Enabled]
SATA1/2/3/4/5/6 [Disabled]
Enables or disables the RAID function of the first to sixth SATA master drive.
Configuration options: [Disabled] [Enabled]
HD Audio [Auto]
Allows you to disable or set the High-Definition audio function.
Configuration options: [Auto] [Disabled]
Front Panel Support Type [HD Audio]
Allows you to set the front panel audio connector (AAFP) mode to legacy AC`97
or high-definition audio depending on the audio standard that the front panel audio
module supports. Configuration options: [AC97] [HD Audio]
Onboard 1st/2nd Nvidia LAN [Enabled]
Enables or disables the onboard NVIDIA® LAN controller.
Configuration options: [Disabled] [Enabled]
OnBoard LAN Boot ROM [Disabled]
Allows you to enable or disable the onboard LAN boot ROM.
Configuration options: [Enabled] [Disabled]
ASUS Striker
4-29
Onboard 1394 [Enabled]
Allows you to disable or enable the onboard 1394 device support.
Configuration options: [Disabled] [Enabled]
LCD Poster Backlight [Disabled]
Allows you to enable or disable the LCD poster backlight.
Configuration options: [Disabled] [Enabled]
LCD Poster Mode [Current Time]
Allows you to select the LCD poster mode.
Configuration options: [Current Time] [User String]
The following item becomes configurable when the “LCD Poster Mode” item is
set to [User String].
LCD Poster String
Allows you to enter a string on the LCD poster.
USB Configuration
The items in this menu allows you to change the USB-related features. Select an
item then press <Enter> to display the configuration options.
Phoenix-Award BIOS CMOS Setup Utility
Advanced
USB Configuration
Select Menu
USB Controller
[Enabled]
[Enabled]
[Enabled]
Item Specific Help
USB2.0 Controller
USB Legacy support
Enable or disable
the USB 1.1 and 2.0
Controller.
USB Controller [Enabled]
Allows you to enable or disable the onchip USB controller.
Configuration options: [Disabled] [Enabled]
USB 2.0 Controller [Enabled]
Allows you to enable or disable the USB 2.0 controller.
Configuration options: [Disabled] [Enabled]
USB Legacy Support [Enabled]
Allows you to enable or disable support for USB devices on legacy operating
systems (OS). Configuration options: [Disabled] [Enabled]
4-30
Chapter 4: BIOS setup
4.6
Power menu
The Power menu items allow you to change the settings for the Advanced
Configuration and Power Interface (ACPI) and the Advanced Power Management
(APM). Select an item then press <Enter> to display the configuration options.
Phoenix-Award BIOS CMOS Setup Utility
Main
Extreme Tweaker
Advanced
Power
Boot
Tools
Exit
ACPI Suspend Type
ACPI APIC support
APM Configuration
Hardware Monitor
[S1&S3]
Enabled
Select Menu
Item Specific Help
Press [Enter] to select
overclock profile.
F1:Help
↑↓ : Select Item
-/+: Change Value
Enter: Select SubMenu
F5: Setup Defaults
F10: Save and Exit
ESC: Exit →←: Select Menu
4.6.1
ACPI Suspend Type [S1&S3]
Allows you to select the Advanced Configuration and Power Interface (ACPI)
state to be used for system suspend. Configuration options: [S1 (POS)] [S3(STR)]
[S1&S3]
4.6.2
ACPI APIC Support [Enabled]
Allows you to enable or disable the Advanced Configuration and Power Interface
(ACPI) support in the Application-Specific Integrated Circuit (ASIC). When set
to Enabled, the ACPI APIC table pointer is included in the RSDT pointer list.
Configuration options: [Disabled] [Enabled]
ASUS Striker
4-31
4.6.3
APM Configuration
Phoenix-Award BIOS CMOS Setup Utility
Power
APM Configuration
Select Menu
Restore on AC Power Loss
[Power-Off]
[Instant-Off]
[Disabled]
[Disabled]
[Disabled]
0
0 : 0 : 0
[Enabled]
[Disabled]
[Disabled]
Item Specific Help
PWR Button < 4 secs
Power Up On PCI/PCIE Devices
USB Resume from S5
Press [Enter] to select
whether or not to restart
the system after AC power
loss
Power On by RTC Alarm
Date (of Month) Alarm
Alarm Time (hh:mm)
HPET Support
Power Up By PS/2 Mouse
Power Up By PS/2 Keyboard
x
x
F1:Help
ESC: Exit
↑↓ : Select Item
→←: Select Menu
-/+: Change Value
Enter: Select SubMenu
F5: Setup Defaults
F10: Save and Exit
Restore on AC Power Loss [Power-Off]
Allows you to enable or disable the Restore on AC Power Loss function.
Configuration options: [Power-Off] [Power-On] [Last State]
PWR Button < 4 secs [Instant-Off]
Allows you to set the event after the power button is pressed for more than 4
seconds. Configuration options: [Suspend] [Instant-Off]
Power Up On PCI/PCIE Devices [Disabled]
Allows you to enable or disable the PME to wake up from S5 by PCI devices & NV
Onboard LAN. Configuration options: [Disabled] [Enabled]
USB Resume from S5 [Disabled]
Allows you to enable or disable the support of USB keyboard or mouse resumption
from S5. Configuration options: [Disabled] [Enabled]
4-32
Chapter 4: BIOS setup
Power On By RTC Alarm [Disabled]
Allows you to enable or disable RTC to generate a wake event. When this item
is set to [Enabled], the items Date (of Month) Alarm and Alarm Time (hh:mm:ss)
items become user-configurable with set values.
Configuration options: [Disabled] [Enabled]
Date (of Month) Alarm [XX]
To set the date of alarm, highlight this item and press <Enter> to display the Date
of Month Alarm pop-up menu. Key-in a value within the specified range then press
<Enter>. Value ‘0’ means everyday. Configuration options: [Min=0] [Max=31].
Alarm Time (hh:mm:ss) [ X: X: X]
To set the time of alarm:
1.
Highlight this item and press <Enter> to display a pop-up menu for the hour
field.
2.
3.
4.
5.
6.
Key-in a value (Min=0, Max=23), then press <Enter>.
Press <TAB> to move to the minutes field then press <Enter>.
Key-in a minute value (Min=0, Max=59), then press <Enter>.
Press <TAB> to move to the seconds field then press <Enter>.
Key-in a second value (Min=0, Max=59), then press <Enter>.
HPET Support [Enabled]
Configuration options: [Disabled] [Enabled]
Power Up By PS/2 Mouse [Disabled]
When set to [Enabled], this parameter allows you to use the PS/2 mouse to turn on
the system. This feature requires an ATX power supply that provides at least 1A on
the +5VSB lead. Configuration options: [Disabled] [Enabled]
Power Up By PS/2 Keyboard [Disabled]
Allows you to disable the Power On by PS/2 keyboard function or set specific
keys on the PS/2 keyboard to turn on the system. This feature requires an ATX
power supply that provides at least 1A on the +5VSB lead. Configuration options:
[Disabled] [Space Bar] [Ctrl-ESC] [Power Key]
ASUS Striker
4-33
4.6.4
Hardware Monitor
The items in this sub-menu displays the hardware monitor values automatically
detected by the BIOS. It also allows you to change CPU Q-Fan feature-related
parameters. Select an item then press <Enter> to display the configuration options.
Phoenix-Award BIOS CMOS Setup Utility
Power
Select Menu
Hardware Monitor
Voltage Monitor
Item Specific Help
Temperature Monitor
Fan Speed Monitor
Fan Speed Control
CPU Fan Speed warning
Press [Enter] to go to
the sub-menu.
[600 RPM]
F1:Help
ESC: Exit
↑↓ : Select Item
→←: Select Menu
-/+: Change Value
Enter: Select SubMenu
F5: Setup Defaults
F10: Save and Exit
Phoenix-Award BIOS CMOS Setup Utility
Power
Select Menu
Voltage Monitor
Vcore Voltage
Memory Voltage
1.2V HT Voltage
NB Voltage
[ 1.32V]
[ 1.84V]
[ 1.23V]
[ 1.20V]
[ 1.50V]
[ 1.34V]
[ 0.92V]
[ 2.94V]
[ 4.81V]
[ 11.07V]
Item Specific Help
Press [Enter] to set.
SB Voltage
CPU VTT Voltage
DDR2 Termination Voltage
3.3V Voltage
5V Voltage
12V Voltage
F1:Help
ESC: Exit
↑↓ : Select Item
→←: Select Menu
-/+: Change Value
Enter: Select SubMenu
F5: Setup Defaults
F10: Save and Exit
Vcore / 3.3V / 5V / 12V Voltage
+1.2V HT / +1.5V Voltage
VTT CPU / DDR2 Termination /DDR2 Voltage
+1.4V / DDR2 Voltage
The onboard hardware monitor automatically detects the voltage output
through the onboard voltage regulators.
4-34
Chapter 4: BIOS setup
Temperature Monitor
Phoenix-Award BIOS CMOS Setup Utility
Power
Temperature Monitor
Select Menu
Item Specific Help
CPU Temperature
M/B Temperature
OPT1 Temperature
OPT2 Temperature
OPT3 Temperature
57ºC
37ºC
0ºC
0ºC
0ºC
CPU, M/B, OPT1/2/3 Temperature
The onboard hardware monitor automatically detects and displays the motherboard,
CPU, and OPT1/2/3 temperatures. These items are not user-configurable.
Fan Speed Monitor
Phoenix-Award BIOS CMOS Setup Utility
Power
Fan Speed Monitor
2960 RPM
Select Menu
CPU Fan Speed
CHA_FAN1 Speed
OPT1 FAN Speed
OPT2 FAN Speed
OPT3 FAN Speed
OPT4 FAN Speed
OPT5 FAN Speed
PWR FAN Speed
Item Specific Help
0 RPM
0 RPM
0 RPM
0 RPM
0 RPM
0 RPM
0 RPM
CPU FAN / CHA _FAN1 Speed
OPT1/2/3/4/5 FAN Speed
PWR FAN Speed
The onboard hardware monitor automatically detects and displays the CPU,
Chassis, and OPT1/2/3/4/5 fan speed in rotations per minute (RPM). If any of the
fans is not connected to the motherboard, the field shows 0. These items are not
user-configurable.
ASUS Striker
4-35
Fan Speed Control
Phoenix-Award BIOS CMOS Setup Utility
Power
Fan Speed Control
Select Menu
Item Specific Help
CPU Fan Control
[Duty Cycle Mode]
[100%]
CPU Fan Duty Cycle
CHA Fan Control
Press [Enter] to enable
or disable.
[Duty Cycle Mode]
[100%]
CHA Fan Duty Cycle
CHA Fan Q-Fan Sense
OPT Fan1 Control
OPT Fan1 Duty Cycle
OPT Fan1 Target Temperature
OPT Fan2 Control
OPT Fan2 Duty Cycle
OPT Fan2 Target Temperature
OPT Fan3 Control
OPT Fan3 Duty Cycle
OPT Fan3 Target Temperature
OPT Fan4 Duty Cycle
OPT Fan5 Duty Cycle
PWR FAN Duty Cycle
x
x
x
x
CPU Temperature
[Duty Cycle Mode]
[100%]
40ºC/104ºF
[Duty Cycle Mode]
[100%]
40ºC/104ºF
[Duty Cycle Mode]
[100%]
40ºC/104ºF
[100%]
[100%]
[100%]
CPU / CHA / OPT Fan1, 2, 3, Fan Control
[Duty Cycle Mode]
Allows you to select the fan control mode.
Configuration options: [Duty Cycle Mode] [Q-FAN Mode]
CPU / CHA / PWR / OPT Fan1, 2 , 3 , 4, 5 Fan Duty Cycle [100%]
Allows you to set the fan duty cycle. When the Fan Control item is set to
Q-FAN Mode, this item is not user-configurable.
Configuration options: [60%] [70%] [80%] [90%] [100%]
CHA Fan Q-Fan Sense [CPU Temperature]
Allows the Q-Fan to sense CPU/MB temperature and to adjust the fan speed.
When the previous items are set to Q-FAN Mode, these items become user-
configurable. Configuration options: [CPU Temperature] [MB Temperature]
OPT Fan1/2/3 Target Temperature [40ºC/104ºF]
Allows the Q-Fan to sense the temperature of fans connected to OPT
Fan1/2/3 and to adjust the fan speed. When the OPT Fan1/2/3 Control items
are set to Q-FAN Mode, these items become user-configurable.
Configuration options: [10ºC/50ºF] [15ºC/59ºF] [20ºC/68ºF] [25ºC/77ºF]
[30ºC/86ºF] [35ºC/95ºF] [40ºC/104ºF] [45ºC/113ºF] [50ºC/122ºF] [55ºC/131ºF]
[60ºC/140ºF] [65ºC/149ºF] [70ºC/158ºF] [75ºC/167ºF] [80ºC/176ºF] [85ºC/
185ºF]
The thermo sensor cables need to be connected to the optional fans first for this
function.
4-36
Chapter 4: BIOS setup
CPU Fan Speed warning [600 RPM]
Allows you to set the CPU fan warning speed function, which gives off a warning
when the CPU fan speed is too low. If you set this item to [Disabled], the system
will not warn you even if no fan is installed or if the fan is not functioning properly.
Configuration options: [Disabled] [600 RPM] [1200 RPM] [1600 RPM]
ASUS Striker
4-37
4.7
Boot menu
The Boot menu items allow you to change the system boot options. Select an item
then press <Enter> to display the sub-menu.
Phoenix-Award BIOS CMOS Setup Utility
Main
Extreme Tweaker
Advanced
Power
Boot
Tools
Exit
Boot Device Priority
Removable Drives
Hard Disk Drives
CDROM Drives
Select Menu
Item Specific Help
Boot Settings Configuration
Select Boot Device
Priority
Security
F1:Help
ESC: Exit
↑↓ : Select Item
→←: Select Menu
-/+: Change Value
Enter: Select Sub-menu
F5: Setup Defaults
F10: Save and Exit
4.7.1
Boot Device Priority
Phoenix-Award BIOS CMOS Setup Utility
Boot
Boot Device Priority
Select Menu
1st Boot Device
[Removable]
Item Specific Help
2nd Boot Device
3rd Boot Device
4th Boot Device
[Hard Disk]
[CDROM]
Select Your Boot
Device Priority
[Disabled]
1st ~ 4th Boot Device [Removable]
These items specify the boot device priority sequence from the available devices.
The number of device items that appears on the screen depends on the number of
devices installed in the system.
Configuration options: [Removable] [Hard Disk] [CDROM] [Disabled]
4-38
Chapter 4: BIOS setup
4.7.2
Removable Drives
Phoenix-Award BIOS CMOS Setup Utility
Boot
Removable Drives
Select Menu
1. Floppy Disks
Item Specific Help
1. Floppy Disks
Allows you to assign a removable drive attached to the system.
4.7.3
Hard Disk Drives
Phoenix-Award BIOS CMOS Setup Utility
Boot
Hard Disk Drives
Select Menu
1. 1st Master: XXXXXXXXX
Item Specific Help
1. 1st Master: XXXXXXXXX
Allows you to assign hard disk drives attached to the system.
4.7.4
CDROM Drives
Phoenix-Award BIOS CMOS Setup Utility
Boot
Hard Disk Drives
Select Menu
1. 1st Slave: XXXXXXXXX
Item Specific Help
1. 1st Slave: XXXXXXXXX
Allows you to assign optical drives attached to the system.
ASUS Striker
4-39
4.7.5
Boot Settings Configuration
Phoenix-Award BIOS CMOS Setup Utility
Boot
Boot Settings Configuration
Select Menu
Case Open Warning
[Enabled]
[Enabled]
[Disabled]
[On]
Item Specific Help
Quick Boot
Boot Up Floppy Seek
Bootup Num-Lock
Press [Enter] to
enable or disable.
Typematic Rate Setting
Typematic Rate (Chars/Sec)
Typematic Delay (Msec)
OS Select For DRAM > 64MB
Full Screen LOGO
[Disabled]
6
x
x
250
[Non-OS2]
[Enabled]
[All Errors]
Halt On
F1:Help
ESC: Exit
↑↓ : Select Item
→←: Select Menu
-/+: Change Value
Enter: Select Sub-menu
F5: Setup Defaults
F10: Save and Exit
Case Open Warning [Enabled]
Enables or disables the chassis open status feature. Setting to Enabled, clears the
chassis open status. Refer to section “2.8.2 Internal connectors” for setting details.
Configuration options: [Disabled] [Enabled]
Quick Boot [Enabled]
Allows you to enable or disable the system quick boot feature. When Enabled, the
system skips certain tests while booting.
Configuration options: [Disabled] [Enabled]
Boot Up Floppy Seek [Disabled]
Enables or disables the chassis open status feature. Setting to Enabled, clears the
chassis open status. Configuration options: [Disabled] [Enabled]
Bootup Num-Lock [On]
Allows you to select the power-on state for the NumLock.
Configuration options: [Off] [On]
Typematic Rate Setting [Disabled]
Allows you to set the keystroke rate. Enable this item to configure the Typematic
Rate (Chars/Sec) and the Typematic Delay (Msec).
Configuration options: [Disabled] [Enabled]
The items Typematic Rate (Chars/Sec) and Typematic Delay (Msec) become
user-configurable only when the item Typematic Rate Setting is enabled.
4-40
Chapter 4: BIOS setup
Typematic Rate (Chars/Sec) [6]
Allows you to select the rate at which a character repeats when you hold a key.
Configuration options: [6] [8] [10] [12] [15] [20] [24] [30]
Typematic Delay (Msec) [250]
Allows you to set the delay before keystrokes begin to repeat.
Configuration options: [250] [500] [750] [1000]
OS Select for DRAM > 64MB [Non-OS2]
Set this item to OS2 only when you are running on an OS/2 operating system with
an installed RAM of greater than 64 MB. Configuration options: [Non-OS2] [OS2]
Full Screen LOGO [Enabled]
Allows you to enable or disable the full screen logo display feature.
Configuration options: [Disabled] [Enabled]
Make sure that the above item is set to [Enabled] if you want to use the ASUS
MyLogo3™ feature.
Halt On [All Errors]
Allows you to set the error report type.
Configuration options: [All Errors] [No Errors] [All, But Keyboard] [All, But Diskette]
[All, But Disk/Key]
4.7.6
Security
Phoenix-Award BIOS CMOS Setup Utility
Boot
Security
Select Menu
Supervisor Password
User Password
Password Check
Clear
Item Specific Help
Clear
[Setup]
Supervisor Password
User Password
These fields allow you to set passwords:
To set a password:
1.
2.
Select an item then press <Enter>.
Type in a password using a combination of a maximum of eight (8)
alpha-numeric characters, then press <Enter>.
ASUS Striker
4-41
3.
When prompted, confirm the password by typing the exact characters again,
then press <Enter>. The password field setting is changed to Set.
To clear the password:
1.
Select the password field and press <Enter> twice. The following message
appears:
PASSWORD DISABLED !!!
Press any key to continue...
2.
Press any key to continue. The password field setting is changed to Clear.
A note about passwords
The Supervisor password is required to enter the BIOS Setup program
preventing unauthorized access. The User password is required to boot the
system preventing unauthorized use.
Forgot your password?
If you forget your password, you can clear it by erasing the CMOS Real Time
Clock (RTC) RAM. The RAM data containing the password information is
powered by the onboard button cell battery. If you need to erase the CMOS
RAM, refer to section “2.6 Jumper” for instructions.
Password Check
This field requires you to enter the password before entering the BIOS setup or the
system. Select [Setup] to require the password before entering the BIOS Setup.
Select [System] to require the password before entering the system.
Configuration options: [Setup] [System]
4-42
Chapter 4: BIOS setup
4.8
Tools menu
The Tools menu items allow you to configure options for special functions. Select
an item then press <Enter> to display the sub-menu.
Phoenix-Award BIOS CMOS Setup Utility
Main
Extreme Tweaker
Advanced
Power
Boot
Tools
Exit
ASUS Music Alarm
ASUS O.C. Profile
Select Menu
ASUS EZ Flash 2
Item Specific Help
F1:Help
ESC: Exit
↑↓ : Select Item
→←: Select Menu
-/+: Change Value
Enter: Select Sub-menu
F5: Setup Defaults
F10: Save and Exit
4.8.1
ASUS Music Alarm
Phoenix-Award BIOS CMOS Setup Utility
Tools
ASUS Music Alarm
Select Menu
ASUS Music Alarm
[Disabled]
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Item Specific Help
x
x
x
x
x
x
x
x
x
x
x
x
x
x
Alarm Date: Sunday
Monday
Press [Enter] to select.
Tuesday
Wednesday
Thursday
Friday
Saturday
Alarm Time (hh:mm)
Audio CD Drive
Detect CD
0
:
0
Primary IDE Master
Enter
N/A
Disabled
10 Mins
16
Starting Track
Repeat Track
Length
Volume
F1:Help
ESC: Exit
↑↓ : Select Item
→←: Select Menu
-/+: Change Value
Enter: Select SubMenu
F5: Setup Defaults
F10: Save and Exit
ASUS Music Alarm [Disabled]
Allows you to enable or disable the ASUS Music Alarm function.
Configuration options: [Disabled] [Enabled]
The succeeding items become user-configurable when you enable the ASUS
Music Alarm.
Alarm Date: Sunday/Monday/Tuesday/Wednesday/Thursday/Friday/
Saturday [Enabled]
Allows you to enable or disable the alarm for a particular day.
Configuration options: [Disabled] [Enabled]
ASUS Striker
4-43
Alarm Time (hh:mm) 0 : 0
Allows you to set the alarm time. Press <Tab> to select the field, then use <+> or
<-> to change the value. Configuration options: [Disabled] [Enabled]
Audio CD Drive [Primary IDE Master]
Allows you to select the connection configuration of the optical storage device from
which the alarm music will play from.
Configuration options: [Primary IDE Master] [Primary IDE Slave]
Detect CD [Enter]
Press <Enter> to search the CD track number.
Starting Track
Allows you to choose the starting track from the CD from which you would like the
alarm music to play.
Repeat Track [Disabled]
Allows you to enable or disable the repeat track function.
Configuration options: [Disabled] [Single] [All]
Length [10 Mins]
Allows you to set the length of the music alarm.
Configuration options: [10 Mins] [20 Mins] [30 Mins] [1 Hour]
Volume [16]
Allows you to set the volume level of the music alarm.
Configuration options: [01] ~ [32]
4.8.2
ASUS O.C. Profile
This item allows you to store or load multiple BIOS settings.
Phoenix-Award BIOS CMOS Setup Utility
Tools
ASUS BIOS Profile
Select Menu
Load BIOS Profile
Save BIOS Profile
Item Specific Help
Press [Enter] to select.
Load BIOS Profile
Phoenix-Award BIOS CMOS Setup Utility
Tools
Load BIOS Profile
Select Menu
Load from Profile 1
Load from Profile 2
Load from File
Item Specific Help
Load BIOS Profile from
Profile 1.
4-44
Chapter 4: BIOS setup
Load from Profile 1/2
Allows you to load the previous BIOS settings saved in the BIOS Flash. Press
<Enter> to load the file.
Load from File
Allows you to load the previous BIOS file saved in the hard disk/floppy disk/USB
flash disk with the FAT32/16/12 format. Follow the instructions below to load the
BIOS file.
1. Insert the storage devices that contains the “xxx.CMO” file.
2. Turn on the system.
3. Enter BIOS setup program. Go to the “Tools” menu to select “Load from
File.” Press <Enter> then the setup screen will appear.
4. Press <Tab> to switch between drives before the correct “xxx.CMO” file
is found. Then press <Enter> to load the file.
5. A pop-up message will inform you when the loading process finishes.
•
•
Suggest only to update the BIOS file coming from the same memory/CPU
configuration and BIOS version.
Only the “xxx.CMO” file can be loaded.
Save BIOS Profile
Phoenix-Award BIOS CMOS Setup Utility
Tools
Save BIOS Profile
Select Menu
Save to Profile 1
Save to Profile 2
Save to File
Item Specific Help
Save current BIOS Profile
to Profile 1.
Save to Profle 1/2
Allows you to save the current BIOS file to the BIOS Flash. Press <Enter> to save
the file.
Save to File
Allows you to save the current BIOS file to the hard disk/floppy disk/USB flash disk
with FAT32/16/12 format. Follow the instructions below to save the BIOS file.
1. Insert the storage devices with enough space.
2. Turn on the system.
3. Enter the BIOS setup program. Go to the “Tools” menu to select “Save to
File.” Press <Enter> then the setup screen will appear.
4. Press <Tab> to switch between the drives. Press hot-key <S> to save
the file.
ASUS Striker
4-45
5. Key in the file name. Then press <Enter>.
6. A pop-up message will inform you when the saving process finishes.
ASUSTek O.C. Profile Utility B318
Current CMOS
BOARD: StrikerExtreme
VER: 0116
Update CMOS
BOARD: Unknown
VER: Unknown
DATE: 10/30/2006
DATE: Unknown
PATH: A:\
A:
CMOS backup is done! Press any key to Exit.
Note
[Enter] Select
[S] Save
[ESC]: Exit
[Tab] Switch
[Up/Down/Home/End] Move
The BIOS file will be saved as “xxx.CMO“.
4.8.3
ASUS EZ Flash 2
Allows you to run ASUS EZ Flash 2. When you press <Enter>, a confirmation
message appears. Use the left/right arrow key to select between [Yes] or [No],
then press <Enter> to confirm your choice.
ASUSTek EZ Flash 2 BIOS ROM Utility B318
FLASH TYPE: Winbond W39V080A 8Mb LPC
Current ROM
BOARD: StrikerExtreme
VER: 0116
Update ROM
BOARD: Unknown
VER: Unknown
DATE: 10/30/2006
DATE: Unknown
PATH: A:\
A:
Note
[Enter] Select
[S] Save
[ESC] Exit
[Tab] Switch
[Up/Down/Home/End] Move
4-46
Chapter 4: BIOS setup
4.9
Exit menu
The Exit menu items allow you to load the optimal or failsafe default values for the
BIOS items, and save or discard your changes to the BIOS items.
Phoenix-Award BIOS CMOS Setup Utility
Main
Extreme Tweaker
Advanced
Power
Boot
Tools
Exit
Exit & Save Changes
Exit & Discard Changes
Load Setup Default
Discard Changes
Select Menu
Item Specific Help
This option save data
to CMOS and exiting
the setup menu.
F1:Help
ESC: Exit
↑↓ : Select Item
→←: Select Menu
-/+: Change Value
Enter: Select SubMenu
F5: Setup Defaults
F10: Save and Exit
Pressing <Esc> does not immediately exit this menu. Select one of the options
from this menu or <F10> from the legend bar to exit.
Exit & Save Changes
Once you are finished making your selections, choose this option from the Exit
menu to ensure the values you selected are saved to the CMOS RAM. An onboard
backup battery sustains the CMOS RAM so it stays on even when the PC is turned
off. When you select this option, a confirmation window appears. Select YES to
save changes and exit.
If you attempt to exit the Setup program without saving your changes, the
program prompts you with a message asking if you want to save your changes
before exiting. Press <Enter> to save the changes while exiting.
Exit & Discard Changes
Select this option only if you do not want to save the changes that you made to the
Setup program. If you made changes to fields other than System Date, System
Time, and Password, the BIOS asks for a confirmation before exiting.
Load Setup Default
This option allows you to load the default values for each of the parameters on the
Setup menus. When you select this option or if you press <F5>, a confirmation
window appears. Select YES to load default values. Select Exit & Save Changes
or make other changes before saving the values to the non-volatile RAM.
Discard Changes
This option allows you to discard the selections you made and restore the
previously saved values. After selecting this option, a confirmation appears. Select
YES to discard any changes and load the previously saved values.
ASUS Striker
4-47
4-48
Chapter 4: BIOS setup
This chapter describes the contents
of the support CD that comes with the
motherboard package.
Software
5
support
Chapter summary
5
5.1
5.2
5.3
5.4
5.5
Installing an operating system ................................................... 5-1
Support CD information .............................................................. 5-1
Software information ................................................................... 5-9
RAID configurations .................................................................. 5-26
Creating a RAID driver disk....................................................... 5-41
ASUS Striker
5.1
Installing an operating system
This motherboard supports Windows® 2000/2003 Server/XP/64-bit XP/Vista
operating systems (OS). Always install the latest OS version and corresponding
updates to maximize the features of your hardware.
•
Motherboard settings and hardware options vary. Use the setup
procedures presented in this chapter for reference only. Refer to your OS
documentation for detailed information.
•
Make sure that you install Windows® 2000 Service Pack 4 or the Windows®
XP Service Pack2 or later versions before installing the drivers for better
compatibility and system stability.
5.2
Support DVD information
The support DVD that came with the motherboard package contains the drivers,
software applications, and utilities that you can install to avail all motherboard
features.
The contents of the support DVD are subject to change at any time without
notice. Visit the ASUS website(www.asus.com) for updates.
5.2.1
Running the support DVD
Place the support DVD to the optical drive. The DVD automatically displays the
Drivers menu if Autorun is enabled in your computer.
Click an icon to
display support
DVD/motherboard
information
Click an item to install
If Autorun is NOT enabled in your computer, browse the contents of the support
DVD to locate the file ASSETUP.EXE from the BIN folder. Double-click the
ASSETUP.EXE to run the DVD.
ASUS Striker
5-1
5.2.2
Drivers menu
The drivers menu shows the available device drivers if the system detects installed
devices. Install the necessary drivers to activate the devices.
ASUS InstAll - Installation Wizard for Drivers
Launches the ASUS InstAll driver installation wizard.
Nvidia Chipset Driver Program
Installs the NVIDIA® Chipset drivers for the NVIDIA® nForce™ 680i SLI chipset.
SoundMAX ADI1988B Audio Driver
Installs the SoundMAX® ADI1988B audio driver and application.
USB 2.0 Driver
Installs the Universal Serial Bus 2.0 (USB 2.0) driver.
5-2
Chapter 5: Software support
5.2.3
Utilities menu
The Utilities menu shows the applications and other software that the motherboard
supports.
ASUS InstAll - Installation Wizard for Utilities
Launches the ASUS InstAll utilities installation wizard.
ASUS PC Probe II
This smart utility monitors the fan speed, CPU temperature, and system voltages,
and alerts you of any detected problems. This utility helps you keep your computer
in healthy operating condition.
ASUS Update
The ASUS Update utility allows you to update the motherboard BIOS in Windows®
environment. This utility requires an Internet connection either through a network
or an Internet Service Provider (ISP).
ASUS AI Booster
The ASUS AI Booster application allows you to overclock the CPU speed in
Windows® environment.
3DMark06 Software
Installs the 3DMark06 software.
ASUS Music Alarm
The ASUS Music Alarm is an audio alarm clock that uses your favorite CD music to
give you a personal wake-up call.
ASUS Striker
5-3
Adobe Reader V7.0
Installs the Adobe® Acrobat® Reader that allows you to open, view, and print
documents in Portable Document Format (PDF).
Microsoft DirectX 9.0c
Installs the Microsoft® DirectX 9.0c driver. The Microsoft DirectX® 9.0c is a
multimedia technology that enhances computer graphics and sound. DirectX®
improves the multimedia features of you computer so you can enjoy watching
TV and movies, capturing videos, or playing games in your computer. Visit the
Microsoft website (www.microsoft.com) for updates.
Anti-Virus Utility
The anti-virus application scans, identifies, and removes computer viruses. View
the online help for detailed information.
5-4
Chapter 5: Software support
5.2.4
Make Disk menu
The Make Disk menu contains items to create the NVIDIA® nForce™ 680i SLI
Serial ATA RAID driver disk.
Make nVidia 32bit SATA RAID Driver
Make nVidia 64bit SATA RAID Driver
Allows you to create an NVIDIA® Serial ATA RAID driver disk for a 32-bit/64-bit
system.
ASUS Striker
5-5
5.2.5
Manuals menu
The Manuals menu contains a list of supplementary user manuals. Click an item to
open the folder of the user manual.
Most user manual files are in Portable Document Format (PDF). Install the
Adobe® Acrobat® Reader from the Utilities menu before opening a user manual
file.
5.2.6
ASUS Contact information
Click the Contact tab to display the ASUS contact information. You can also find
this information on the inside front cover of this user guide.
5-6
Chapter 5: Software support
5.2.7
Other information
The icons on the top right corner of the screen give additional information on the
motherboard and the contents of the support DVD. Click an icon to display the
specified information.
Motherboard Info
Displays the general specifications of the motherboard.
Browse this DVD
Displays the support DVD contents in graphical format.
ASUS Striker
5-7
Technical support form
Displays the ASUS Technical Support Request Form that you have to fill out when
requesting technical support.
Filelist
Displays the contents of the support DVD and a brief description of each in text
format.
5-8
Chapter 5: Software support
5.3
Software information
Most of the applications in the support DVD have wizards that will conveniently
guide you through the installation. View the online help or readme file that came
with the software application for more information.
5.3.1
ASUS MyLogo3™
The ASUS MyLogo3™ utility lets you customize the boot logo. The boot logo is the
image that appears on screen during the Power-On Self-Tests (POST). The ASUS
MyLogo3™ is automatically installed when you install the ASUS Update utility from
the support DVD. See section “5.2.3 Utilities menu” for details.
•
•
Before using the ASUS MyLogo3™, use the Award BIOS Flash utility to
make a copy of your original BIOS file, or obtain the latest BIOS version
from the ASUS website. See section “4.1.4 Updating the BIOS.”
Make sure that the BIOS item Full Screen Logo is set to [Enabled]
if you wish to use ASUS MyLogo3. See section “4.7.5 Boot Settings
Configuration”.
•
•
You can create your own boot logo image in GIF, or BMP file formats.
The file size should be smaller than 150 K.
To launch the ASUS MyLogo3™:
1.
Launch the ASUS Update utility. Refer to section “4.1.1 ASUS Update utility”
for details.
2.
3.
Select Options from the drop down menu, then click Next.
Check the option Launch MyLogo to replace system boot logo before
flashing BIOS, then click Next.
4.
5.
Select Update BIOS from a file from the drop down menu, then click Next.
When prompted, locate the new
BIOS file, then click Next. The ASUS
MyLogo window appears.
6.
From the left window pane, select the
folder that contains the image you
intend to use as your boot logo.
ASUS Striker
5-9
7.
When the logo images appear on the
right window pane, select an image to
enlarge by clicking on it.
8.
Adjust the boot image to your desired
size by selecting a value on the Ratio
box.
9.
When the screen returns to the ASUS Update utility, flash the original BIOS to
load the new boot logo.
10. After flashing the BIOS, restart the computer to display the new boot logo
during POST.
5-10
Chapter 5: Software support
5.3.2
SoundMAX® High Definition Audio utility
The ADI AD1988B High Definition Audio CODEC provides 8-channel audio
capability through the SoundMAX® audio utility with AudioESP™ software to
deliver the ultimate audio experience on your PC. The software implements high
quality audio synthesis/rendering, 3D sound positioning, and advanced voice-input
technologies.
Follow the installation wizard to install the ADI AD1988B Audio Driver from the
support DVD that came with the motherboard package to activate the SoundMAX®
audio utility.
•
•
You must use 4-channel, 6-channel or 8-channel speakers for this setup.
SoundMAX® requires Microsoft® Windows® 2000/XP or later version. Make
sure that one of these operating systems is installed before installing
SoundMAX®.
•
Jack Retasking function works on High Definition front panel audio ports
only.
If the SoundMAX® audio utility is correctly installed, you
will find the SoundMAX® icon on the taskbar.
ASUS Striker
5-11
From the taskbar, double-click on the SoundMAX® icon to display the SoundMAX®
Control Panel.
Audio Setup Wizard
By clicking the
icon from the SoundMAX® control panel, you can easily
configure your audio settings. Simply follow succeeding screen instructions and
begin enjoying High Definition Audio.
5-12
Chapter 5: Software support
Jack configuration
Adjust speaker volume
This screen helps you configure your
computer’s audio ports, depending on
the audio devices you have installed.
This screen helps you adjust speaker
volume. Click the Test button to hear
the changes you have made.
Adjust microphone volume
This screen helps you adjust microphone volume. You will be asked to read pre-
written text to allow the AudioWizard to adjust the volume as you speak.
ASUS Striker
5-13
Audio preferences
Click the
icon to go to the Preferences page. This page allows you to change
various audio settings.
General options
Click the General tab to choose your playback and recording devices, enable/
disable the AudioESP™ feature, and enable/disable digital output.
DTS
This feature is consists of two elements: DTS interactive and DTS NEO:PC. DTS
interactive re-encodes your stereo or multi-channel sound into a DTS audio signal
and send it out from your PC to any DTS enabled system.
While DTS NEO:PC turns your stereo audio such as MP3, WMA, CD, and other
sound format into a convincing multi-channel audio experience.
5-14
Chapter 5: Software support
Microphone options
Click the Listening Environment tab allows you to optimize your microphone input
settings.
Enhanced Microphone Features
Noise Filtering
Enables Noise Filter function. Detects repetitive and stationary noises like
computer fans, air conditioners, and other background noises then eliminates
it in the incoming sudio stream while recording. You can enable it for a better
recording quality.
Voice Recording
Receives only the sound coming from the reception cone and eliminates
interferences including neighboring speakers and reverberations. You can
enable it to transit clearer sound during on-line games, MSN, or Skype.
Directional Array
Advanced de-reverberation techniques can help to reduce echo and minimize
its effect on the speech engine. You can enable it when you have conference
call to reduce echoes in the other side.
ASUS Striker
5-15
5.3.3
ASUS PC Probe II
PC Probe II is a utility that monitors the computer’s vital components, and detects
and alerts you of any problem with these components. PC Probe II senses fan
rotations, CPU temperature, and system voltages, among others. Because PC
Probe II is software-based, you can start monitoring your computer the moment
you turn it on. With this utility, you are assured that your computer is always at a
healthy operating condition.
Installing PC Probe II
To install PC Probe II on your computer:
1.
Place the support DVD to the optical drive. The Drivers installation tab
appears if your computer has an enabled Autorun feature.
If Autorun is not enabled in your computer, browse the contents of the support
DVD to locate the setup.exe file from the ASUS PC Probe II folder. Double-click
the setup.exe file to start installation.
2.
3.
Click the Utilities tab, then click ASUS PC Probe II.
Follow the screen instructions to complete installation.
Launching PC Probe II
You can launch the PC Probe II right after installation or anytime from the
Windows® desktop.
To launch the PC Probe II from the Windows® desktop, click Start > All Programs
> ASUS > PC Probe II > PC Probe II v1.xx.xx. The PC Probe II main window
appears.
After launching the application, the PC Probe II icon appears in the Windows®
taskbar. Click this icon to close or restore the application.
Using PC Probe II
Main window
The PC Probe II main window
allows you to view the current
status of your system and change
the utility configuration. By
default, the main window displays
the Preference section. You can
close or restore the Preference
section by clicking on the triangle on the main window right handle.
Click to close the
Preference panel
5-16
Chapter 5: Software support
Button
Function
Opens the Configuration window
Opens the Report window
Opens the Desktop Management Interface window
Opens the Peripheral Component Interconnect window
Opens the Windows Management Instrumentation window
Opens the hard disk drive, memory, CPU usage window
Shows/Hides the Preference section
Minimizes the application
Closes the application
Sensor alert
When a system sensor detects a problem, the main window right handle
turns red, as the illustrations below show.
When displayed, the monitor panel for that sensor also turns red. Refer to the
Monitor panels section for details.
Preferences
You can customize the application using the
Preference section in the main window. Click
the box before each preference to activate or
deactivate.
ASUS Striker
5-17
Hardware monitor panels
The hardware monitor panels display the current value of a system sensor such as
fan rotation, CPU temperature, and voltages.
The hardware monitor panels come in two display modes: hexagonal (large) and
rectangular (small). When you check the Enable Monitoring Panel option from the
Preference section, the monitor panels appear on your computer’s desktop.
Small display
Large display
Changing the monitor panels position
To change the position of the monitor panels in the desktop,
click the arrow down button of the Scheme options, then select
another position from the list box. Click OK when finished.
Moving the monitor panels
All monitor panels move together using a magnetic effect. If
you want to detach a monitor panel from
the group, click the horseshoe magnet
icon. You can now move or reposition the
panel independently.
Adjusting the sensor threshold value
You can adjust the sensor threshold
value in the monitor panel by
clicking the <+> or <-> buttons. You
can also adjust the threshold values
Click to
increase
value
using the Config window.
Click to
You cannot adjust the sensor
threshold values in a small
monitoring panel.
decrease
value
5-18
Chapter 5: Software support
Monitoring sensor alert
The monitor panel turns red when a component value exceeds or is lower
than the threshold value. Refer to the illustrations below.
Small display
Large display
WMI browser
Click to display the
WMI (Windows Management
Instrumentation) browser. This
browser displays various Windows®
management information. Click an
item from the left panel to display on
the right panel. Click the plus sign (+)
before WMI Information to display the
available information.
You can enlarge or reduce the browser size by dragging the bottom right corner
of the browser.
DMI browser
Click to display the DMI
(Desktop Management Interface)
browser. This browser displays various
desktop and system information.
Click the plus sign (+) before DMI
Information to display the available
information.
ASUS Striker
5-19
PCI browser
Click
to display the PCI
(Peripheral Component Interconnect)
browser. This browser provides
information on the PCI devices installed
on your system. Click the plus sign
(+) before the PCI Information item to
display available information.
Usage
The Usage browser displays real-time information on the CPU, hard disk drive
space, and memory usage. Click
to display the Usage browser.
CPU usage
The CPU tab displays real-
time CPU usage in line graph
representation. If the CPU has
an enabled Hyper-Threading,
two separate line graphs display
the operation of the two logical
processors.
Hard disk drive space usage
The Hard Disk tab displays the
used and available hard disk
drive space. The left panel of the
tab lists all logical drives. Click
a hard disk drive to display the
information on the right panel.
The pie chart at the bottom of
the window represents the used
(blue) and the available HDD
space.
5-20
Chapter 5: Software support
Memory usage
The Memory tab shows both
used and available physical
memory. The pie chart at the
bottom of the window represents
the used (blue) and the available
physical memory.
Configuring PC Probe II
Click
to view and adjust the sensor threshold values.
The Config window has two tabs: Sensor/Threshold and Preference. The Sensor/
Threshold tab enables you to activate the sensors or to adjust the sensor threshold
values. The Preference tab allows you to customize sensor alerts, or change the
temperature scale.
Loads the default
Loads your saved
configuration
threshold values for
each sensor
Cancels or
ignores your
changes
Applies your
changes
Saves your
configuration
ASUS Striker
5-21
5.3.4
ASUS Music Alarm
This motherboard is equipped with an audio alarm clock called ASUS Music Alarm.
The ASUS Music Alarm gives you a personal wake-up called with your favorite CD
music when the system is off. The onboard audio CODEC supports this feature,
which requires an optical drive (CD-ROM, CD-RW, or DVD-ROM).
•
Make sure that the power cord is plugged to a grounded power source so
that the system has standby power.
•
•
ASUS Music Alarm only supports audio CDs.
ASUS Music Alarm will not work if you installed and enabled an add-on
sound card.
•
Only IDE ATAPI devices from the Southbridge support this feature.
Hardware setup
To set up the hardware:
1.
2.
Connect the analog audio cable from the optical drive to the 4-pin CD-In
connector on the audio module.
Connect speakers or a headphone to the Line-Out (lime-colored) port on
the front or rear panel for audio output. You may also connect speakers or a
headphone to the output jack on the optical drive.
3.
Refer to the succeeding sections to make the appropriate settings in the
BIOS or in Windows®.
BIOS configuration
To enable ASUS Music Alarm in the BIOS:
1.
2.
3.
4.
Turn on the system.
During POST, press <Del> to enter BIOS setup.
Go to the Tools menu, then select ASUS Music Alarm.
Set the ASUS Music Alarm item to [Enabled]. See section “4.8.1 ASUS
Music Alarm” for details.
5-22
Chapter 5: Software support
OS configuration
To configure ASUS Music Alarm in Windows®
1.
2.
3.
4.
Place the support DVD into the optical drive.
Click the Utilities tab and choose ASUS Music Alarm to install the utility.
Insert an audio CD into the optical drive.
Launch the ASUS Music Alarm application by going to Start > ASUS > ASUS
Music Alarm. The main window appears.
Minimize button
Exit button
Alarm information section
shows the alarm time and
days
Options section
shows playing options
Music section
shows the drive letter of the
chosen optical drive and the
starting track number to use
as music alarm
5.
Click the arrow ( ) next to Time
for Next Alarm in the Alarm
information section. The Alarm
Time Setting panel appears. Set
the days and time of the alarm, or
enable/disable the Music Alarm
feature.
When done, click OK.
6.
Click the arrow ( ) next to Music in the Music
section. The Music Selection panel appears.
Select the optical storage device, then choose
the starting CD track number from which you
would like the music alarm to play.
When done, click OK.
ASUS Striker
5-23
7.
Click the arrow ( ) next to Options
in the Options section. The Options
panel appears. Disable or select the
Repeat mode, then specify the length
of the alarm music to play. Set the
desired volume.
When done, click OK.
8.
After you have finished making all the required settings, turn off the system.
Adjusting the volume
To adjust the volume while the music alarm is playing:
•
Use the <Up> or <Down> arrow key to increase or decrease the volume.
Turning off the music alarm
To turn off the music alarm:
•
Press any key to stop playing the CD and turn off the system.
•
•
•
•
While the music alarm is playing, the system wake-up features (LAN,
keyboard, mouse, PCI/PCIE device, modem) are deactivated.
If the system loses connection or if it does not detect any optical drive or
audio CD, the ASUS Music Alarm is automatically disabled/turned off.
While the music alarm is playing, the optical drive front panel functions are
automatically disabled.
The ASUS Music Alarm works only when the system is off.
5-24
Chapter 5: Software support
5.3.5
ASUS AI Booster
The ASUS AI Booster application allows you to overclock the CPU speed in
WIndows® environment without the hassle of booting the BIOS.
After installing the program from the bundled support DVD, you can launch the
utility by double-clicking the AI Booster icon on the Windows® OS taskbar.
The options on the task bar allow you to use the default settings, adjust CPU/
Memory/PCI-E frequency manually, or create and apply your personal overclocking
configurations.
ASUS Striker
5-25
5.4
RAID configurations
The motherboard comes with two RAID controllers that allow you to configure
Serial ATA hard disk drives as RAID sets.
•
The NVIDIA® nForce™ 680i SLI Southbridge includes a high performance
SATA RAID controller that supports RAID 0, RAID 1, RAID 0+1, RAID 5 and
JBOD for six independent Serial ATA channels.
5.4.1
RAID definitions
RAID 0 (Data striping) optimizes two identical hard disk drives to read and write
data in parallel, interleaved stacks. Two hard disks perform the same work as a
single drive but at a sustained data transfer rate, double that of a single disk alone,
thus improving data access and storage. Use of two new identical hard disk drives
is required for this setup.
RAID 1 (Data mirroring) copies and maintains an identical image of data from one
drive to a second drive. If one drive fails, the disk array management software
directs all applications to the surviving drive as it contains a complete copy of
the data in the other drive. This RAID configuration provides data protection and
increases fault tolerance to the entire system. Use two new drives or use an
existing drive and a new drive for this setup. The new drive must be of the same
size or larger than the existing drive.
RAID 0+1 is data striping and data mirroring combined without parity (redundancy
data) having to be calculated and written. With the RAID 0+1 configuration you get
all the benefits of both RAID 0 and RAID 1 configurations. Use four new hard disk
drives or use an existing drive and three new drives for this setup.
RAID 5 stripes both data and parity information across three or more hard
disk drives. Among the advantages of RAID 5 configuration include better
HDD performance, fault tolerance, and higher storage capacity. The RAID
5 configuration is best suited for transaction processing, relational database
applications, enterprise resource planning, and other business systems. Use a
minimum of three identical hard disk drives for this setup.
JBOD (Spanning) stands for Just a Bunch of Disks and refers to hard disk drives
that are not yet configured as a RAID set. This configuration stores the same
data redundantly on multiple disks that appear as a single disk on the operating
system. Spanning does not deliver any advantage over using separate disks
independently and does not provide fault tolerance or other RAID performance
benefits.
5-26
Chapter 5: Software support
If you want to boot the system from a hard disk drive included in a RAID set,
first copy the RAID driver from the support DVD to a floppy disk before you
install an operating system to a selected hard disk drive. Refer to section “5.5
Creating a RAID driver disk” for details.
5.4.2
NVIDIA® RAID configurations
The motherboard includes a high performance SATA RAID controller integrated in
the NVIDIA® nForce™ 680i SLI southbridge chipset. It supports RAID 0, RAID 1,
RAID 0+1, RAID 5 and JBOD for six independent Serial ATA channels.
Installing Serial ATA (SATA) hard disks
The motherboard supports Ultra DMA 133/100/66 and Serial ATA hard disk drives.
For optimal performance, install identical drives of the same model and capacity
when creating a disk array.
To install the SATA hard disks for a RAID configuration:
1.
2.
3.
Install the SATA hard disks into the drive bays.
Connect the SATA signal cables.
Connect a SATA power cable to the power connector on each drive.
Refer to the RAID controllers user manual in the motherboard support DVD
for detailed information on RAID configurations. See section “5.2.5 Manuals
menu.”
Setting the BIOS RAID items
After installing the hard disk drives, make sure to set the necessary RAID items in
the BIOS before setting your RAID configuration.
To set the BIOS RAID items:
1.
2.
3.
Boot the system and press <Del> during the Power-On Self-Test (POST) to
enter the BIOS Setup Utility.
Enable the RAID Enabled item in the BIOS. See section “4.5.3 Onboard
Device Configuration > Serial-ATA Configuration” for details.
Select and enable the IDE or SATA drive(s) that you want to configure
as RAID. See section “4.5.3 Onboard Device Configuration > Serial-ATA
Configuration” for details.
4.
Save your changes and Exit Setup.
ASUS Striker
5-27
Make sure to re-enter your NVRAID settings after the CMOS is cleared;
otherwise, the system will not recognize your RAID setup.
•
•
For detailed descriptions on the NVIDIA® RAID configuration, refer to the
“NVIDIA® RAID User Guide” found in your motherboard support CD.
When using Windows® 2000 operating system, make sure to install the
Windows® 2000 Service Pack 4 or later version.
Entering the NVIDIA® RAID utility
To enter the NVIDIA® RAID utility:
1.
2.
Boot up your computer.
During POST, press <F10> to display the main menu of the utility.
The RAID BIOS setup screens shown in this section are for reference only, and
may not exactly match the items on your screen.
NVIDIA RAID Utility Oct 5 2004
- Define a New Array -
RAID Mode: Striping
Free Disks
Striping Block:
Array Disks
Optimal
Loc
Disk Model Name
Loc
Disk Model Name
1.0.M XXXXXXXXXXXXXXXXXX
1.1.M XXXXXXXXXXXXXXXXXX
2.0.M XXXXXXXXXXXXXXXXXX
2.1.M XXXXXXXXXXXXXXXXXX
[→] Add
[←] Del
[F6] Back [F7] Finish [TAB] Navigate [↑↓] Select [ENTER] Popup
At the bottom of the screen are the navigation keys. These keys allow you to move
through and select menu options.
5-28
Chapter 5: Software support
Creating a RAID Volume
To create a RAID volume:
1.
From the NVIDIA® RAID utility Define a New Array menu, select RAID Mode
then press <Enter>. The following submenu appears.
Use the up or down arrow keys to select a
RAID mode then press <Enter>.
Mirroring
Striping
Stripe Mirroring
Spanning
2.
Press <TAB> select the Striping
Block then press <Enter>. The
following submenu appears:
8K
↑
16K
32K
64K
128K
Optim↓
If you selected Striping or Stripe Mirroring, use the up or down arrow keys to
select the stripe size for your RAID 0 array then press <Enter>.The available
values range from 8 KB to 128 KB. The default selection is 128 KB. The strip
value should be chosen based on the planned drive usage.
• 8 /16 KB - low disk usage
• 64 KB - typical disk usage
• 128 KB - performance disk usage
TIP: For server systems, we recommend using a lower array block size. For
multimedia computer systems used mainly for audio and video editing, we
recommend a higher array block size for optimum performance.
3.` Press <TAB> to select the Free Disks area. Use the left or right arrow keys to
assign the array disks.
4.
Press <F7> to create RAID set. The following message box appears.
Clear disk data?
[Y] YES
[N] NO
5.
Press <Y> to clear the selected disks or <N> to proceed without clearing the
disks. The following screen appears.
Take caution in using this option. All data on the RAID drives will be lost!
ASUS Striker
5-29
NVIDIA RAID Utility Oct 5 2004
- Array List -
Boot
No
Id Status
Healthy
Vendor
NVIDIA
Array Model Name
MIRROR XXX.XXG
4
[Ctrl-X]Exit [↑↓]Select [B]Set Boot [N]New Array [ENTER]Detail
A new set of navigation keys is displayed on the bottom of the screen.
Press <Ctrl+X> to save settings and exit.
6.
Rebuilding a RAID array
To rebuild a RAID array:
1.
From the Array List menu, use the up or down arrow keys to select a RAID
array then press <Enter>. The RAID Array details appear.
Array 1 : NVIDIA MIRROR XXX.XXG
- Array Detail -
RAID Mode: Mirroring
Striping Width: 1
Striping Block: 64K
Adapt Channel M/S
Index Disk Model Name
Capacity
2
1
1
0
Master
Master
0
1
XXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXX
XXX.XXGB
XXX.XXGB
[R] Rebuild [D] Delete [C] Clear Disk [ENTER] Return
5-30
Chapter 5: Software support
A new set of navigation keys is displayed on the bottom of the screen.
Press <R> to rebuild a RAID array. The following screen appears.
2.
Array 1 : NVIDIA MIRROR XXX.XXG
- Select Disk Inside Array -
RAID Mode: Mirroring
Striping Width: 1
Striping Block: 64K
Adapt Channel M/S
Index Disk Model Name
Capacity
2
1
1
0
Master
Master
0
1
XXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXX
XXX.XXGB
XXX.XXGB
[↑↓] Select [F6] Back [F7] Finish
3.
Use the up or down arrow keys to select a RAID array to rebuild, then press
<F7>. The following confirmation message appears.
Rebuild array?
[ENTER] OK [ESC] Cancel
4.
5.
Press <Enter> to start rebuilding array or press <Esc> to cancel.
After the rebuild process, the Array list menu appears.
You will need to enter Window® XP and run the NVIDIA utility in order to
complete the rebuilt process.
ASUS Striker
5-31
Deleting a RAID array
To delete a RAID array:
1.
From the Array List menu, use the up or down arrow keys to select a RAID
array then press <Enter>. The RAID Array details appear.
Array 1 : NVIDIA MIRROR XXX.XXG
- Array Detail -
RAID Mode: Mirroring
Striping Width: 1
Striping Block: 64K
Adapt Channel M/S
Index Disk Model Name
Capacity
2
1
1
0
Master
Master
0
1
XXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXX
XXX.XXGB
XXX.XXGB
[R] Rebuild [D] Delete [C] Clear Disk [ENTER] Return
A new set of navigation keys is displayed on the bottom of the screen.
2.
Press <D> to delete a RAID array. The following confirmation message
appears.
Delete this array?
[Y] YES [N] No
3.
Press <Y> to delete array or press <N> to cancel.
Take caution in using this option. All data on the RAID drives will be lost!
4.
If you selected Yes, the Define a New Array menu appears.
5-32
Chapter 5: Software support
Clearing a disk data
To clear disk data:
1.
From the Array List menu, use the up or down arrow keys to select a RAID
array then press <Enter>. The RAID Array details appear.
Array 1 : NVIDIA MIRROR XXX.XXG
- Array Detail -
RAID Mode: Mirroring
Striping Width: 1
Striping Block: 64K
Adapt Channel M/S
Index Disk Model Name
Capacity
2
1
1
0
Master
Master
0
1
XXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXX
XXX.XXGB
XXX.XXGB
[R] Rebuild [D] Delete [C] Clear Disk [ENTER] Return
A new set of navigation keys is displayed on the bottom of the screen.
2.
Press <C> to clear disk. The following confirmation message appears.
Clear disk data?
[Y] YES
[N]
5.
Press <Y> to clear the disk data or press <N> to cancel.
Take caution in using this option. All data on the RAID drives will be lost!
ASUS Striker
5-33
5.5
Creating a RAID driver disk
A floppy disk with the RAID driver is required when installing Windows® 2000/XP
operating system on a hard disk drive that is included in a RAID set.
To create a RAID driver disk:
1.
2.
3.
Place the motherboard support DVD into the DVD-ROM drive.
Select Make Disk tab.
From the Make Disk menu, select the RAID driver disk you want to create or
browse the contents of the support DVD to locate the driver disk utility.
Refer to section “5.2.4 Make Disk menu” for details.
4.
5.
6.
Insert floppy disk to floppy disk drive.
Follow succeeding screen information to complete process.
Write-protect the floppy disk to avoid computer virus infection.
To install the RAID driver:
1.
2.
3.
During the OS installation, the system prompts you to press the F6 key to
install third-party SCSI or RAID driver.
Press <F6> then insert the floppy disk with RAID driver into the floppy disk
drive.
Follow the succeeding screen instructions to complete the installation.
Due to chipset limitation, the Serial ATA ports supported by the NVIDIA chipset
doesn’t support Serial Optical Disk Drives (Serial ODD) under DOS.
5-34
Chapter 5: Software support
This chapter tells how to install SLI-ready
PCI Express graphics cards.
NVIDIA® SLI™
technology sup6port
Chapter summary
6.1
6.2
Overview ....................................................................................... 6-1
Dual graphics cards setup .......................................................... 6-2
ASUS Striker
6.1
Overview
The motherboard supports the NVIDIA® SLI™ (Scalable Link Interface) technology
that allows you to install two identical PCI Express™ x16 graphics cards. Follow
the installation procedures in this section.
Requirements
•
•
•
You should have two identical SLI-ready graphics cards that are NVIDIA®
certified.
Make sure that your graphics card driver supports the NVIDIA SLI technology.
Download the latest driver from the NVIDIA website (www.nvidia.com).
Make sure that your power supply unit (PSU) can provide at least the
minimum power required by your system. See “8. ATX power connectors” on
page 2-31 for details.
•
The NVIDIA SLI technology supports Windows® XP™ 32-bit/64bit operating
system only.
•
Visit the NVIDIA zone website (http://www.nzone.com) for the latest certified
graphics card and supported 3D application list.
ASUS Striker
6-1
6.2
Dual graphics card setup
6.2.1
Installing SLI-ready graphics cards
Install only identical SLI-ready graphics cards that are NVIDIA®-certified.
Different types of graphics cards will not work together properly.
To install the graphics cards:
1.
Prepare two graphics cards. Each graphics card should have goldfingers for
the SLI connector.
Goldfingers
2.
Remove the metal bracket covers opposite the two PCI Express x16 slots.
6-2
Chapter 6: NVIDIA® SLI™ technology support
3.
Insert one graphics card into one of the blue slots (PCIEX16_1). Make sure
that the card is properly seated on the slot.
4.
Insert the second graphics card into the other slot (PCIEX16_3). Make sure
that the card is properly seated on the slot.
If required, connect an auxiliary power source to the PCI Express graphics
cards.
ASUS Striker
6-3
5.
Align and insert the SLI connector to the goldfingers on each graphics card.
Make sure that the connector is firmly in place.
SLI connector
6.
When installing two VGA cards using a 20-pin ATX PSU with sufficient+12v
capability, we recommend that you connect the auxillary power source from
the power supply to the graphics card. Refer to the PSU documentation for
dual VGA power requirements.
7.
Connect a VGA cable or a DVI-I cable to the graphics card/s.
We recommend to install an additional chassis fan for better thermal
environment.
6-4
Chapter 6: NVIDIA® SLI™ technology support
6.2.2
Installing the device drivers
Refer to the documentation that came with your graphics card package to install
the device drivers.
Make sure that your PCI Express graphics card driver supports the NVIDIA SLI
technology. Download the latest driver from the NVIDIA website (www.nvidia.
com).
6.2.3
Enabling the multi-GPU feature in Windows®
After installing your graphics cards and the device drivers, enable the
Multi-Graphics Processing Unit (GPU) feature in the NVIDIA nView properties.
To enable the multi-GPU feature:
1.
2.
Click the NVIDIA Settings icon on
your Windows taskbar.
NVIDIA Settings icon
From the pop-up menu, select
nView Desktop Manager then click
nView Properties.
3.
From the nView Desktop Manager
window, select the Desktop
Management tab.
4.
Click Properties to display the
Display Properties dialog box.
ASUS Striker
6-5
5.
6.
7.
From the Display Properties dialog
box, select the Settings tab then
click Advanced.
Select the NVIDIA GeForce tab.
Click the slider to display the
following screen, then select the SLI
multi-GPU item.
Slider
8.
9.
Click the Enable SLI multi-GPU check box.
Click OK when done.
6-6
Chapter 6: NVIDIA® SLI™ technology support
|
HP Hewlett Packard 7550 User Manual
Hotpoint GF760RX User Manual
GN Netcom Flex Boom GN 2100 User Manual
GE 25826 User Manual
Daxten RACKACCESS 16I User Manual
Compaq TFT 7000 User Manual
Cisco Systems UC5208U4FXOK9RF User Manual
BT Relate 2100 User Manual
Asus P3V4X User Manual
Acer AL1951 User Manual