Asus Computer Monitor VW199D User Manual

July 2010  
VW199 Series  
LED Monitor  
User Guide  
Notices  
Federal Communications Commission Statement  
This device complies with Part 15 of the FCC Rules. Operation is subject  
to the following two conditions:  
This device may not cause harmful interference, and  
This device must accept any interference received including  
interference that may cause undesired operation.  
This equipment has been tested and found to comply with the limits for a  
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits  
are designed to provide reasonable protection against harmful interference  
in a residential installation. This equipment generates, uses and can  
radiate radio frequency energy and, if not installed and used in accordance  
with manufacturer’s instructions, may cause harmful interference to radio  
communications. However, there is no guarantee that interference will  
not occur in a particular installation. If this equipment does cause harmful  
interference to radio or television reception, which can be determined by  
turning the equipment off and on, the user is encouraged to try to correct  
the interference by one or more of the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment to an outlet on a circuit different from that to  
which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
As an Energy Star® Partner, our company has determined  
that this product meets the Energy Star® guidelines for  
energy efficiency.  
Canadian Department of Communications Statement  
This digital apparatus does not exceed the Class B limits for radio  
noise emissions from digital apparatus set out in the Radio Interference  
Regulations of the Canadian Department of Communications.  
This class B digital apparatus complies with Canadian ICES-003.  
iii  
 
Safety information  
Before setting up the monitor, carefully read all the documentation that  
came with the package.  
To prevent fire or shock hazard, never expose the monitor to rain or  
moisture.  
Never try to open the monitor cabinet. The dangerous high voltages  
inside the monitor may result in serious physical injury.  
If the power supply is broken, do not try to fix it by yourself. Contact a  
qualified service technician or your retailer.  
Before using the product, make sure all cables are correctly connected  
and the power cables are not damaged. If you detect any damage,  
contact your dealer immediately.  
Slots and openings on the back or top of the cabinet are provided for  
ventilation. Do not block these slots. Never place this product near or  
over a radiator or heat source unless proper ventilation is provided.  
The monitor should be operated only from the type of power source  
indicated on the label. If you are not sure of the type of power supply to  
your home, consult your dealer or local power company.  
Use the appropriate power plug which complies with your local power  
standard.  
Do not overload power strips and extention cords. Overloading can  
result in fire or electric shock.  
Avoid dust, humidity, and temperature extremes. Do not place the  
monitor in any area where it may become wet. Place the monitor on a  
stable surface.  
Unplug the unit during a lightning storm or if it will not be used for a  
long period of time. This will protect the monitor from damage due to  
power surges.  
Never push objects or spill liquid of any kind into the slots on the  
monitor cabinet.  
To ensure satisfactory operation, use the monitor only with UL listed  
computers which have appropriate configured receptacles marked  
between 100-240V AC.  
If you encounter technical problems with the monitor, contact a  
qualified service technician or your retailer.  
iv  
 
Care & Cleaning  
Before you lift or reposition your monitor, it is better to disconnect the cables  
and power cord. Follow the correct lifting techniques when positioning the  
monitor. When lifting or carrying the monitor, grasp the edges of the monitor.  
Do not lift the display by the stand or the cord.  
Cleaning. Turn your monitor off and unplug the power cord. Clean the monitor  
surface with a lint-free, non-abrasive cloth. Stubborn stains may be removed  
with a cloth dampened with mild cleaner.  
Avoid using a cleaner containing alcohol or acetone. Use a cleaner intended  
for use with the LED. Never spray cleaner directly on the screen, as it may drip  
inside the monitor and cause an electric shock.  
The following symptoms are normal with the monitor:  
The screen may flicker during the initial use due to the nature of the fluorescent  
light. Turn off the Power Switch and turn it on again to make sure that the  
flicker disappears.  
You may find slightly uneven brightness on the screen depending on the  
desktop pattern you use.  
When the same image is displayed for hours, an afterimage of the previous  
screen may remain after switching the image. The screen will recover slowly or  
you can turn off the Power Switch for hours.  
When the screen becomes black or flashes, or cannot work anymore, contact  
your dealer or service center to fix it. Do not repair the screen by yourself!  
Conventions used in this guide  
WARNING: Information to prevent injury to yourself when trying to  
complete a task.  
CAUTION: Information to prevent damage to the components when  
trying to complete a task.  
IMPORTANT: Information that you MUST follow to complete a task.  
NOTE: Tips and additional information to aid in completing a task.  
v
 
Where to find more information  
Refer to the following sources for additional information and for product and  
software updates.  
1.  
2.  
ASUS websites  
The ASUS websites worldwide provide updated information on ASUS  
hardware and software products. Refer to http://www.asus.com  
Optional documentation  
Your product package may include optional documentation that may have  
been added by your dealer. These documents are not part of the standard  
package.  
vi  
1.1  
Welcome!  
Thank you for purchasing the ASUS® VW199 Series LED monitor!  
The latest widescreen LED monitor from ASUS provides a crisper, broader, and  
brighter display, plus a host of features that enhance your viewing experience.  
With these features, you can enjoy the convenience and delightful visual  
experience that the VW199 Series brings you!  
1.2  
Package contents  
Check your VW199 Series LED Monitor package for the following items:  
LED monitor  
Monitor stand and base  
User manual CD  
Quick start guide  
Warranty card  
Power cord  
VGA cable  
Audio cable (VW199T/S)  
If any of the above items is damaged or missing, contact your retailer  
immediately.  
ASUS LED Monitor VW199 Series  
1-1  
 
1.3  
Assembling the monitor  
To assemble the monitor:  
1.  
Connect the base with the monitor. A click indicates that the base has been  
connected successfully.  
2.  
Adjust the monitor to the angle that is most comfortable.  
We recommend that you cover the table surface with soft cloth to prevent  
damage to the monitor.  
1
2
1.4  
Monitor introduction  
1.4.1  
Front of the LED monitor  
1.4.1.1 VW199T/VW199S  
1
2
3
4
5
6
1-2  
Chapter 1: Product Introduction  
 
1.  
Button:  
Automatically adjust the image to its optimized position, clock, and  
phase by long pressing this button for 2-4 seconds (for VGA mode only).  
Use this hotkey to switch from six video preset modes (Scenery Mode,  
Standard Mode, Theater Mode, Game Mode, Night View Mode, and  
sRGB Mode) with SPLENDID™ Video Intelligence Technology.  
Exit the OSD menu or go back to the previous menu as the OSD menu  
is active.  
2.  
3.  
4.  
Button:  
Press this button to decrease the value of the function selected or move  
to the next fuction.  
This is also a hotkey for Volume adjustment.  
MENU Button:  
Press this button to enter the OSD menu.  
Press this button to enter/select the icon (function) highlighted while the  
OSD is activated.  
Button:  
Press this button to increase the value of the function selected or move  
right/up to the next function.  
This is also a hotkey for Brightness adjustment.  
5.  
6.  
Power Button:  
Press this button to turn the monitor on/off.  
Power Indicator  
The color definition of the power indicator is as the below table.  
Status  
Blue  
Description  
ON  
Amber  
OFF  
Standby mode  
OFF  
ASUS LED Monitor VW199 Series  
1-3  
1.4.1.2 VW199N/VW199D  
1
2
3
4
5
6
1.  
Button:  
Automatically adjust the image to its optimized position, clock, and  
phase by long pressing this button for 2-4 seconds (for VGA mode only).  
Use this hotkey to switch from six video preset modes (Scenery Mode,  
Standard Mode, Theater Mode, Game Mode, Night View Mode, and  
sRGB Mode) with SPLENDID™ Video Intelligence Technology.  
Exit the OSD menu or go back to the previous menu as the OSD menu  
is active.  
2.  
3.  
4.  
5.  
Button:  
Press this button to decrease the value of the function selected or move  
to the next fuction.  
This is also a hotkey for Contrast adjustment.  
MENU Button:  
Press this button to enter the OSD menu.  
Press this button to enter/select the icon (function) highlighted while the  
OSD is activated.  
Button:  
Press this button to increase the value of the function selected or move  
right/up to the next function.  
This is also a hotkey for Brightness adjustment.  
Power Button:  
Press this button to turn the monitor on/off.  
1-4  
Chapter 1: Product Introduction  
6.  
Power Indicator  
The color definition of the power indicator is as the below table.  
Status  
Blue  
Description  
ON  
Amber  
OFF  
Standby mode  
OFF  
1.4.2  
Rear of the LED monitor  
Screw holes for  
VESA Wall Mount  
Rear connectors  
3
2
4
1
1
2
3
4
AC-IN port  
Audio Line-in port (VW199T/S)  
DVI port (VW199T/N)  
VGA port  
ASUS LED Monitor VW199 Series  
1-5  
 
2.1  
Detaching the arm/stand  
(for VESA wall mount)  
The detachable stand of the VW199 Series LED monitor is specially designed for  
VESA wall mount.  
To detach the arm/stand:  
1.  
2.  
3.  
Remove the arm cover.  
Have the front of the monitor face down on a table.  
Use a screwdriver to remove the three screws on the stand of the monitor as  
the below drawing shows.  
4.  
Detach the stand from the monitor.  
We recommend that you cover the table surface with soft cloth to prevent  
damage to the monitor.  
Hold the stand of the monitor when you remove the screws.  
screws  
The VESA wall mount kit ( 100 x 100 mm) is purchased separately.  
2-1  
Chapter 2: Setup  
 
2.2  
Adjusting the monitor  
For optimal viewing, we recommend that you look at the full face of the  
monitor, then adjust the monitor to the angle that is most comfortable for you.  
Hold the stand to prevent the monitor from falling while changing its angle.  
You can adjust the monitor’s angle from -5˚ to 20˚.  
-5º~20º  
ASUS LED Monitor VW199 Series  
2-2  
 
3.1  
OSD (On-Screen Display) menu  
3.1.1  
How to reconfigure  
VW199  
Splendid  
Color  
Scenery Mode  
Standard Mode  
Theater Mode  
Game Mode  
Image  
Input Select  
System Setup  
Night View Mode  
sRGB  
Move  
Menu  
Exit  
1.  
2.  
Press the MENU button to activate the OSD menu.  
Press and to navigate through the functions. Highlight and activate the  
desired function by pressing the MENU button. If the function selected has a  
sub-menu, press and again to navigate through the sub-menu functions.  
Highlight and activate the desired sub-menu function by pressing the MENU  
button.  
3.  
4.  
Press and to change the settings of the selected function.  
To exit the OSD menu, press the  
button. Repeat step 2 and step 3 to  
adjust any other function.  
3.1.2  
OSD Function Introduction  
1.  
Splendid  
This function contains six sub-functions that you can select for your  
preference. Each mode has the Reset selection, allowing you to maintain  
your setting or return to the preset mode.  
VW199  
Splendid  
Color  
Scenery Mode  
Standard Mode  
Theater Mode  
Game Mode  
Image  
Input Select  
System Setup  
Night View Mode  
sRGB  
Move  
Menu  
Exit  
2-3  
Chapter 3: General Instruction  
 
Scenery Mode: This is the best choice for scenery photo displaying with  
SPLENDID™ Video Intelligence Technology.  
Standard Mode: This is the best choice for document editing with  
SPLENDID™ Video Intelligence Technology.  
Theater Mode: This is the best choice for movie watching with  
SPLENDID™ Video Intelligence Technology.  
Game Mode: This is the best choice for game playing with SPLENDID™  
Video Intelligence Technology.  
Night View Mode: This is the best choice for playing dark-scene game  
or watching dark-scene movie with SPLENDID™ Video Intelligence  
Technology.  
sRGB  
In the Standard Mode, the Saturation, Skin Tone, Sharpness, ASCR are  
not user-configurable.  
In the sRGB, the Brightness, Contrast, Saturation, Color Temp, Skin  
Tone and ASCR are not user-configurable.  
2.  
Color  
Select the image color you like from this function.  
VW199  
Splendid  
Color  
Brightness  
Contrast  
100  
80  
Image  
Saturation  
Color Temp  
50  
Input Select  
System Setup  
User Mode  
Natural  
OFF  
Skin Tone  
Smart View  
Move  
Menu  
Exit  
Brightness: The adjusting range is from 0 to 100.  
Contrast: The adjusting range is from 0 to 100.  
Saturation: The adjusting range is from 0 to 100.  
Color Temp.: Contains three preset color modes (Cool, Normal, Warm)  
and one User Mode.  
Skin Tone: Contains three color modes including Reddish, Natural, and  
Yellowish.  
Smart View: Turns the Smart View Function on or off.  
ASUS LED Monitor VW199 Series  
2-4  
In the User Mode, colors of R (Red), G (Green), and B (Blue) are  
userconfigurable; the adjusting range is from 0 ~ 100.  
3.  
Image  
You can adjust the image Sharpness, Aspect Control, ASCR, Position (VGA  
only), and Focus (VGA only) from this main function.  
VW199  
Splendid  
Color  
Sharpness  
40  
Aspect Control  
Full  
Image  
OFF  
ASCR  
Input Select  
Position  
Focus  
System Setup  
Move  
Menu  
Exit  
Sharpness: Adjusts the picture sharpness. The adjusting range is from 0  
to 100.  
Aspect Control: Adjusting the aspect ratio to “Full” or “4:3”.  
ASCR: Select ON or OFF to enable or disable dynamic contrast ratio  
function.  
Position: Adjusts the horizontal position (H-Position) and the vertical  
position (V-Position) of the image. The adjusting range is from 0 to 100  
(Only available for VGA input).  
Focus: Reduces Horizonal-line noise and Vertical-line noise of the image  
by adjusting (Phase) and (Clock) separately. The adjusting range is from  
0 to 100 (Only available for VGA input).  
4.  
Input Select  
Selects the input source from VGA or DVI (VW199T/N).  
VW199  
Splendid  
Color  
VGA  
DVI  
Image  
Input Select  
System Setup  
Move  
Menu  
Exit  
2-5  
Chapter 3: General Instruction  
5.  
System Setup  
Adjusts the system configuration.  
VW199  
Splendid  
Color  
Splendid Demo Mode  
Volume  
OFF  
83  
Image  
ECO Mode  
OFF  
Input Select  
OSD Setup  
System Setup  
Language  
English  
Information  
1/2  
Move  
Menu  
Exit  
VW199  
Splendid  
Color  
All Reset  
Image  
Input Select  
System Setup  
2/2  
Move  
Menu  
Exit  
Splendid Demo Mode: Activate the demo mode for the Splendid  
function.  
Volume: Adjusts the Volume level of speakers. (VW199T/S).  
ECO Mode: Turns the ECO Mode Function on or off.  
OSD Setup: Adjusts the horizontal position (H-Position), vertical position  
(V-Position), OSD Timeout, DDD/CI, and Transparency of the OSD  
screen.  
Language: Selects OSD language. The selections are English, French,  
German, Spanish, Italian, Dutch, Russian, Traditional Chinese, Simplified  
Chinese, Japanese and Korean.  
Information: Displays the monitor information.  
All Reset: Selects “Yes” to revert all settings to the factory default mode.  
ASUS LED Monitor VW199 Series  
2-6  
3.2  
Specifications  
Model  
VW199T/N/S/D  
19”W (48.3 cm)  
1440x900  
Panel Size  
Max. Resolution  
Brightness (Typ.)  
Intrisinc Contrast Ratio (Typ.)  
Viewing Angle (H/V), (CR10)  
Display Colors  
250cd/m2  
1000:1  
170°/160°  
16.7 M  
Response Time  
5ms (Tr+Tf)  
Analog Input  
D-Sub  
Digital Input  
DVI(VW199T/N only)  
1W x 2 (VW199T/ S only)  
-5° ~ +20°  
Speaker (Build-in)  
Tilt  
VESA Wall Mounting  
Phys. Dimension (WxHxD)  
Box Dimension (WxHxD)  
Net Weight (Esti.)  
Gross Weight (Esti.)  
Voltage Rating  
Yes (100 mm x 100 mm)  
444x369.26x210 mm  
496x416x139 mm  
4.0 kg  
5.2 kg  
AC 100~240V(Built-in)  
2-7  
Chapter 3: General Instruction  
 
3.3  
Troubleshooting (FAQ)  
Problem  
Possible Solution  
button to check if the monitor is in the  
Power LED is not ON  
Press the  
ON mode.  
Check if the power cord is properly connected to the  
monitor and the power outlet.  
The power LED lights amber and  
there is no screen image  
Check if the monitor and the computer are in the  
ON mode.  
Make sure the signal cable is properly connected  
the monitor and the computer.  
Inspect the signal cable and make sure none of the  
pins are bent.  
Connect the computer with another available  
monitor to check if the computer is properly working.  
Screen image is too light or dark  
Adjust the Contrast and Brightness settings via  
OSD.  
Screen image is not centered or  
sized properly  
Press the  
button for two seconds to  
automatically adjust the image (for VGA input only).  
Adjust the H-Position or V-Position settings via OSD  
(for VGA input only).  
Screen image bounces or a wave  
pattern is present in the image  
Make sure the signal cable is properly connected to  
the monitor and the computer.  
Move electrical devices that may cause electrical  
interference.  
Screen image has color defects  
(white does not look white)  
Inspect the signal cable and make sure that none of  
the pins are bent.  
Perform All Reset via OSD.  
Adjust the R/G/B color settings or select the Color  
Temperature via OSD.  
Screen image is blurry or fuzzy  
Press the  
button for two seconds to  
automatically adjust the image (for VGA input only).  
Adjust the Phase and Clock settings via OSD.  
No sound or sound is low  
(VW199T/S)  
Ensure that the audio cable is properly connected to  
the monitor and the computer.  
Adjust the volume settings of both your monitor and  
computer.  
Ensure that the computer sound card driver is  
properly installed and activated.  
ASUS LED Monitor VW199 Series  
2-8  
 
3.4  
Supported timing list  
PC Supported Primary Timing  
Mode  
Resolution  
H(KHz)  
V(Hz)  
Pixel (MHz)  
640x480  
60  
31.469  
25.175  
640x480  
640x480  
800x600  
800x600  
800x600  
800x600  
1024x768  
1024x768  
1024x768  
72  
75  
56  
60  
72  
75  
60  
70  
75  
VGA  
37.861  
37.5  
31.5  
31.5  
36  
35.156  
37.879  
48.077  
46.875  
48.363  
56.476  
60.023  
40  
SVGA  
XGA  
50  
49.5  
65  
75  
78.75  
1152x864  
1280x960  
1280x1024  
1280x1024  
1440x900  
1440x900  
67.5  
60  
63.981  
79.976  
55.935  
70.635  
75  
60  
60  
75  
60  
75  
108  
108  
108  
135  
106.5  
136.75  
SXGA  
WXGA+  
IBM Modes, Factory Preset Timing  
Mode  
Resolution  
H(KHz)  
V(Hz)  
Pixel (MHz)  
640x350  
70  
DOS  
31.469  
25.175  
720x400  
70  
DOS  
31.469  
28.322  
MAC Modes, Factory Preset Timing  
Mode  
VGA  
Resolution  
640x480  
H(KHz)  
35  
V(Hz)  
67  
Pixel (MHz)  
30.24  
SVGA  
832x624  
49.725  
75  
57.2832  
2-9  
Chapter 3: General Instruction  
 

GE General Electric Convection Oven JBP65 User Manual
GE 18 Feb User Manual
Fujitsu C141 E090 02EN User Manual
Electrolux Cooktop E36IC80ISS User Manual
Electrolux 922197 User Manual
Electrolux 269554 User Manual
Cypress CY62167EV18 User Manual
BT DIVERSE X10 User Manual
B B Electronics Computer Hardware Ulinx Extender User Manual
Asus P8h61 M Lx3 R2 0 Desktop Motherboard P8H61 M LX3 R2 0 User Manual