Asus Computer Monitor VK246 User Manual

VW246/VK246  
LCD Monitor  
User’s manual  
M
EGA  
1.3  
PIXELS  
MENU  
MENU  
Contents  
iii  
 
Notices  
Federal Communications Commission Statement  
This device complies with Part 15 of the FCC Rules. Operation is subject to the  
following two conditions:  
This device may not cause harmful interference, and  
This device must accept any interference received including interference that  
may cause undesired operation.  
This equipment has been tested and found to comply with the limits for a  
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are  
designed to provide reasonable protection against harmful interference in a  
residential installation. This equipment generates, uses and can radiate radio  
frequency energy and, if not installed and used in accordance with manufacturer’  
s instructions, may cause harmful interference to radio communications. However,  
there is no guarantee that interference will not occur in a particular installation. If  
this equipment does cause harmful interference to radio or television reception,  
which can be determined by turning the equipment off and on, the user is  
encouraged to try to correct the interference by one or more of the following  
measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment to an outlet on a circuit different from that to which the  
receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
The use of shielded cables for connection of the monitor to the graphics card is  
required to assure compliance with FCC regulations. Changes or modifications  
to this unit not expressly approved by the party responsible for compliance could  
void the user’s authority to operate this equipment.  
As an Energy Star® Partner, our company has determined that this product meets  
the Energy Star® guidelines for energy efficiency.  
Canadian Department of Communications Statement  
This digital apparatus does not exceed the Class B limits for radio noise emissions  
from digital apparatus set out in the Radio Interference Regulations of the  
Canadian Department of Communications.  
This class B digital apparatus complies with Canadian ICES-003.  
iv  
 
Safety information  
Before setting up the monitor, carefully read all the documentation that came  
with the package.  
To prevent fire or shock hazard, never expose the monitor to rain or moisture.  
Never try to open the monitor cabinet. The dangerous high voltages inside the  
monitor may result in serious physical injury.  
If the power supply is broken, do not try to fix it by yourself. Contact a qualified  
service technician or your retailer.  
Before using the product, make sure all cables are correctly connected and the  
power cables are not damaged. If you detect any damage, contact your dealer  
immediately.  
Slots and openings on the back or top of the cabinet are provided for  
ventilation. Do not block these slots. Never place this product near or over a  
radiator or heat source unless proper ventilation is provided.  
The monitor should be operated only from the type of power source indicated  
on the label. If you are not sure of the type of power supply to your home,  
consult your dealer or local power company.  
Use the appropriate power plug which complies with your local power  
standard.  
Do not overload power strips and extention cords. Overloading can result in  
fire or electric shock.  
Avoid dust, humidity, and temperature extremes. Do not place the monitor in  
any area where it may become wet. Place the monitor on a stable surface.  
Unplug the unit during a lightning storm or if it will not be used for a long period  
of time. This will protect the monitor from damage due to power surges.  
Never push objects or spill liquid of any kind into the slots on the monitor  
cabinet.  
To ensure satisfactory operation, use the monitor only with UL listed  
computers which have appropriate configured receptacles marked between  
100-240V AC.  
If you encounter technical problems with the monitor, contact a qualified  
service technician or your retailer.  
This symbol of the crossed out wheeled bin indicates that the product (electrical,  
electronic equipment and mercury-containing button cell battery) should not  
be placed in municipal waste. Please check local regulations for disposal of  
electronic products.  
v
 
Care & Cleaning  
Before you lift or reposition your monitor, it is better to disconnect the cables  
and power cord. Follow the correct lifting techniques when positioning the  
monitor. When lifting or carrying the monitor, grasp the edges of the monitor.  
Do not lift the display by the stand or the cord.  
Cleaning. Turn your monitor off and unplug the power cord. Clean the monitor  
surface with a lint-free, non-abrasive cloth. Stubborn stains may be removed  
with a cloth dampened with mild cleaner.  
Avoid using a cleaner containing alcohol or acetone. Use a cleaner intended  
for use with the LCD. Never spray cleaner directly on the screen, as it may drip  
inside the monitor and cause an electric shock.  
The following symptoms are normal with the monitor:  
The screen may flicker during the initial use due to the nature of the fluorescent  
light. Turn off the Power Switch and turn it on again to make sure that the  
flicker disappears.  
You may find slightly uneven brightness on the screen depending on the  
desktop pattern you use.  
When the same image is displayed for hours, an afterimage of the previous  
screen may remain after switching the image. The screen will recover slowly or  
you can turn off the Power Switch for hours.  
When the screen becomes black or flashes, or cannot work anymore, contact  
your dealer or service center to fix it. Do not repair the screen by yourself!  
Conventions used in this guide  
To make sure that you perform certain tasks properly, take note of the following  
symbols used throughout this manual.  
DANGER/WARNING: Information to prevent injury to yourself  
when trying to complete a task.  
CAUTION: Information to prevent damage to the components  
when trying to complete a task.  
IMPORTANT: Instructions that you MUST follow to complete a  
task.  
NOTE: Tips and additional information to help you complete a  
task.  
vi  
 
Where to find more information  
Refer to the following sources for additional information and for product and  
software updates.  
1.  
2.  
ASUS websites  
The ASUS websites worldwide provide updated information on ASUS  
Optional documentation  
Your product package may include optional documentation that may have  
been added by your dealer. These documents are not part of the standard  
package.  
vii  
viii  
1.  
Product introduction  
1.1  
Welcome!  
Thank you for purchasing the ASUS® VW246/VK246 LCD monitor!  
The latest widescreen LCD monitor from ASUS provides a crisper, broader, and  
brighter display, plus a host of features that enhance your viewing experience.  
Besides, VK246 provides the built-in 1.3 mega-pixel webcam, which enhances  
image quality. No need for installing additional driver while having a video  
conference or chatting with friends online!  
With these features, you can enjoy the convenience and delightful audio-visual  
experience that VW246/VK246 brings you!  
1.2  
Package contents  
Check your VW246/VK246 LCD monitor package for the following items:  
LCD monitor  
Support CD (VK246 only)  
Quick start guide  
Power cord x1  
VGA cable x1  
DVI cable x1  
USB 2.0 cable x1 (VK246 only)  
Audio cable x1  
If any of the above items is damaged or missing, contact your retailer  
immediately.  
ASUS VW246/VK246 LCD Monitor  
1
 
1.3  
Monitor introduction  
Front view  
1.3.1  
VW246  
1.3 mega-pixel  
Webcam  
VK246  
M
EGA  
1.3  
PIXELS  
M
E
N
U
MENU  
Base  
MENU  
Control panel  
1
2
3
4
5
6
7
1.  
button:  
Use this hotkey to switch from five video preset modes (Game Mode,  
Night View Mode, Scenery Mode, Standard Mode, Theater Mode) with  
SPLENDID™ Video Enhancement Technology.  
Exit the OSD menu or go back to the previous menu as the OSD menu  
is active.  
Automatically adjust the image to its optimized position, clock, and phase  
by pressing this button for 2–3 seconds (VGA input only).  
2.  
button:  
Press this button to decrease the value of the function selected or move  
left/up to the previous function.  
This is also a hotkey for Volume adjustment.  
3.  
4.  
MENU button:  
Press this button to enter/select the icon (function) highlighted while the  
OSD is activated.  
button:  
Press this button to increase the value of the function selected or move  
right/down to the next function.  
This is also a hotkey for Brightness adjustment.  
button  
5.  
Use this hotkey to switch among the three input sources (VGA, DVI,  
HDMI).  
Press  
(Input Select Button) to display HDMI signals after you connect HDMI  
cable with monitor.  
2
ASUS VW246/VK246 LCD Monitor  
 
6.  
7.  
button  
Press this button to turn the monitor on/off  
Power indicator  
The color definition of the power  
Status  
Blue  
Description  
ON  
indicator is as the table at the right  
side.  
Amber  
OFF  
Standby mode  
OFF  
1.3.2  
Back view  
VW246  
VK246  
Stereo speakers  
1.3 mega-pixel  
Webcam  
(2Wx2)  
VESA  
wall  
mount  
screw  
holes  
Cable  
hook  
1
2
3
4
5
6
7
Rear connectors  
1.  
2.  
3.  
4.  
5.  
6.  
7.  
AC-IN port. Connects the power cord.  
Audio out port. Connects to external speakers.  
Audio in port. Connects to PC audio source.  
USB 2.0 port (VK246 only). For activating the built-in webcam.  
HDMI port. For high-definition multimedia interface (HDMI) signal connection.  
DVI port. For DVI-D digital signal connection.  
VGA port. For VGA analog signal connection.  
The VESA wall mount kit (100 mm x 100 mm) is purchased separately.  
ASUS VW246/VK246 LCD Monitor  
3
2.  
Setup  
2.1  
Assembling the monitor base  
To assemble the monitor base:  
1.  
2.  
Have the front of the monitor face down on a table.  
Connect the base with the arm according to the below drawing. A click sond  
shows that the base has been connected successfully.  
We recommend that you cover the table surface with soft cloth to prevent  
damage to the monitor.  
2.2  
Adjusting the monitor  
For optimal viewing, we recommend that you look at the full face of the  
monitor, then adjust the monitor to the angle that is most comfortable for you.  
Hold the stand to prevent the monitor from falling when you change its angle.  
You can adjust the monitor’s angle from -3˚–20˚.  
-3˚–20˚  
It is normal that the monitor slightly shakes while you adjust the the viewing  
angle.  
4
ASUS VW246/VK246 LCD Monitor  
 
2.3  
Detaching the arm/base (for VESA wall mount)  
The detachable arm/base of the VW246/VK246 LCD monitor is specially designed  
for VESA wall mount.  
To detach the arm/base:  
1.  
2.  
3.  
Have the front of the monitor face down on a table.  
Remove the rubbers in the four screw holes (Figure 1).  
Use a screwdriver to remove the two arm screws, and then slide out the  
arm/base to detach it from the monitor (Figure 2).  
Rubbers in the  
screw holes  
Arm screws  
Arm/base  
Figure 1  
Figure 2  
We recommend that you cover the table surface with soft cloth to prevent  
damage to the monitor.  
ASUS VW246/VK246 LCD Monitor  
5
 
2.4  
Connecting the cables  
Connect the cables as shown:  
VK246  
1. Power cord  
2. Audio-out cable  
3. Audio-in cable  
4. USB 2.0 cable  
5. HDMI signal cable  
6. DVI signal cable  
7. VGA signal cable  
1
2
3
4
5
6
7
VW246  
1
2
3
5
6
7
The HDMI cable and audio-out cable are purchased separately.  
To connect the power cord: connect one end of the power cord  
securely to the monitor’s AC input port, the other end to a power outlet.  
Before you connect the cables, ensure that your PC is switched off or the power  
cord is unpluged from the wall socket.  
To connect the signal cables: connect one end of the signal cable(s) to  
the monitor, the other end to your computer or any other video device.  
When the HDMI, DVI, and VGA cables are connected simultaneously, you can  
switch the input source from the Input Select item of the OSD functions, or by  
using the hotkey  
on the front panel.  
To connect the audio cable: connect the audio cable from the monitor’s  
audio-in port to the computer's audio-out port.  
To connect to external speakers: Connect an audio-out cable from  
the audio-out port of the LCD monitor to the audio-in port of external  
speakers.  
2.5  
Turning on the monitor  
Gently press the power button  
. See page 2 for the location of the power button.  
The power indicator lights up in blue to show that the monitor is ON.  
6
ASUS VW246/VK246 LCD Monitor  
 
2.6  
Built-in webcam support  
With the built-in webcam, VK246 allows you to take pictures, have a video  
conference, or record video clips. While chatting with friends via Internet-based  
communication tools, you can directly show your vivid image.  
System requirements  
A personal computer with Pentium® III 800 MHz or higher processor  
Microsoft® Windows® Vista / XP Service Pack 2 (3) operating systems  
Minimum 200 MB free hard disk space to run the program  
128 MB of RAM or above  
A display card supporting 16-bit high color mode  
Make sure that the bundled USB cable is connected to both the LCD  
monitor and your PC. Otherwise, the webcam will not be activated.  
Make sure that you have installed the Windows® Vista / XP Service Pack 2 (3)  
or later versions before using the device.  
Using the device  
The device transmits images to your PC through the USB 2.0 port. Therefore,  
make sure that the bundled USB cable is connected to both the LCD monitor and  
your PC before you use the device.  
2.7  
LifeFrame 2 software  
ASUS VK246 provides the easy-to-use LifeFrame 2 software that can work with  
the webcam, allowing users to create their own photos or video clips.  
LifeFrame 2 only supports Microsoft® Windows® Vista / XP Service Pack 2 (3)  
operating systems.  
The LifeFrame 2 software is bundled in the support CD.  
Installation instructions  
1.  
2.  
3.  
Close all other applications.  
Insert the support CD into the optical drive and run the LifeFrame 2 program.  
Follow the on-screen instructions to complete the installation  
ASUS VW246/VK246 LCD Monitor  
7
 
3.  
General Instruction  
3.1  
OSD (On-Screen Display) menu  
3.1.1  
How to reconfigure  
1.  
Press the MENU button to activate the  
OSD menu.  
2.  
Press  
and  
to navigate through  
the functions. Highlight and activate the  
desired function by pressing the MENU  
button. If the function selected has a sub-  
menu, press  
and  
again to  
navigate through the sub-menu functions.  
Highlight and activate the desired sub-  
menu function by pressing the MENU button.  
3.  
4.  
Press  
and  
to change the settings of the selected function.  
To exit the OSD menu, press the  
adjust any other function.  
button. Repeat step 2 and step 3 to  
3.1.2  
OSD Function Introduction  
Splendid  
1.  
This function contains five sub-functions  
you can select for your preference. Each  
mode has the Reset selection, allowing  
you to maintain your setting or return to  
the preset mode.  
Scenery Mode: best choice for  
scenery photo display with  
SPLENDID™ Video Enhancement.  
Standard Mode: best choice for document editing with SPLENDID™  
Video Enhancement.  
Theater Mode: best choice for movie with SPLENDID™ Video  
Enhancement.  
Game Mode: best choice for game playing with SPLENDID™ Video  
Enhancement.  
Night View Mode: best choice for dark-scene game or movie with  
SPLENDID™ Video Enhancement.  
In the Standard Mode, the ASCR, Satuation, and Sharpness functions are  
not user-configurable.  
Except in the Standard Mode, the sRGB function is not user-configurable.  
8
ASUS VW246/VK246 LCD Monitor  
 
2.  
Image  
You can adjust brightness, contrast,  
sharpness, saturation, position (VGA input  
only), ASCR, and focus (VGA input only)  
from this main function.  
Brightness: the adjusting range is  
from 0 to 100.  
is a hotkey to  
activate this function.  
Contrast: the adjusting range is from  
0 to 100.  
ASCR: turns on/off the ASCR(ASUS Smart Contrast Ratio) function.  
Sharpness: the adjusting range is from 0 to 100.  
Saturation: the adjusting range is from 0 to 100.  
Position: adjusts the horizontal postition (H-Position) and the vertical  
position (V-Position) of the image. The adjusting range is from 0 to 100.  
Focus: reduces Horizonal-line noise and Vertical-line noise of the image  
by adjusting (Phase) and (Clock) separately. The adjusting range is from  
0 to 100.  
Phase adjusts the phase of the pixel clock signal. With a wrong phase  
adjustment, the screen shows horizontal disturbances.  
Clock (pixel frequency) controls the number of pixels scanned by one  
horizontal sweep. If the frequency is not correct, the screen shows vertical  
stripes and the image is not proportional.  
3.  
Color  
Select the image color you like from this  
function.  
Color Temp.: contains five color  
modes including Cool, Normal, Warm,  
sRGB, and User mode.  
Skin Tone: contains three color  
modes including Reddish, Natural,  
and Yellowish.  
In the User mode, colors of R (Red), G (Green), and B (Blue) are user-  
configurable; the adjusting range is from 0-100.  
ASUS VW246/VK246 LCD Monitor  
4.  
Input Select  
Select from VGA, DVI, and HDMI input  
sources.  
5.  
System Setup  
Allow you to adjust the system.  
Volume: the adjusting range is from  
0 to 100.  
is a hotkey to activate  
this function.  
OSD Setup:  
* Adjusts the horizontal postition  
(H-Position)/ the vertical position  
(V-Position) of the OSD from 0 to 100.  
* Adjusts the OSD timeout from 10 to 120.  
*
Enables or disables the DDC/CI function.  
Language: there are ten languages for your selection, including English,  
German, Italian, French, Dutch, Spanish, Russian, Traditional Chinese,  
Simplified Chinese, and Japanese.  
Aspect Control: adjusts the aspect ratio to “Full” or “4:3”.  
Information: shows the monitor information.  
All Reset: “Yes” allows you to restore the default setting.  
10  
ASUS VW246/VK246 LCD Monitor  
3.2  
Specifications summary (VK246)  
Panel Type  
Panel size  
TFT LCD  
24" (16:ꢀ) wide screen  
Max. Resolution  
Pixel pitch  
Full HD 1ꢀ20 x 1080  
0.277mm  
240cd/m2  
300cd/m2  
Brightness (Typ.)  
Brightness (Max.)  
Contrast Ratio (Typ.)  
Contrast Ratio (Max.)  
Viewing angle(H/V) CR>10  
Display colors  
1000:1  
20000:1 (with ASCR ON)  
170˚/160˚  
16.7M  
Response time  
2ms (Gray to Gray)  
1.3 mega-pixels  
Built-in webcam  
SPLENDID™ Video  
Enhancement  
Yes  
SPLENDID™ selection  
Auto adjustment  
Color temperature selection  
Skin-Tone selection  
HDMI input  
5 video preset modes (by hotkey)  
Yes (by hotkey)  
5 color temperatures  
3 skin-tones  
HDMI (VK246H)  
Digital input  
DVI-D with HDCP (VK246H/U)  
D-Sub  
Analog input  
Audio-in port  
3.5 mm Mini-jack  
3.5 mm Mini-jack  
Black  
Earphone Jack  
Colors  
Speaker (Built-in)  
Power LED  
2W x 2 Stereo, RMS  
Blue (On)/ Amber (Standby)  
100 x 100mm  
VESA wall mount  
Tilt  
-3˚–20˚  
Kensington lock  
Voltage rating  
Power consumption  
Yes  
AC: 100~240V  
Power On : < 4ꢀW, Standby: < 2W, Power Off: <1W  
568 mm x 422 mm x 230 mm (machine)  
645 mm x 477 mm x 186 mm (package)  
Dimension (W x H x D)  
Weight (Esti.)  
5.5 kg (Net) ; 8 kg (Gross)  
0˚C–40˚C  
Temperature (Operating)  
Temperature (Non-operating)  
Humidity (Operating)  
Humidity (Non-operating)  
-20˚C–60˚C  
10%~ꢀ0%  
5%~ꢀ0%  
10 languages (English, German, Italian, French, Dutch, Spanish,  
Russian, Traditional Chinese, Simplified Chinese, Japanese)  
Multi-languages  
Accessories  
VGA cable, DVI cable, audio cable, USB cable, power cord, quick  
start guide, warranty card  
Energy Star®, CB, CE, Gost-R, CCC, UL/cUL, FCC,  
Vista Premium (VK246H/U), Vista Basic (VK246S),  
C-Tick, BSMI, VCCI, RoHS, WEEE, PSB  
Regulation approvals  
*Specifications are subject to change without notice.  
ASUS VW246/VK246 LCD Monitor  
11  
 
Specifications summary (VW264)  
Panel Type  
TFT LCD  
Panel size  
24" (16:ꢀ) wide screen  
Full HD 1ꢀ20 x 1080  
0.277mm  
Max. Resolution  
Pixel pitch  
240cd/m2  
300cd/m2  
Brightness (Typ.)  
Brightness (Max.)  
Contrast Ratio (Typ.)  
Contrast Ratio (Max.)  
Viewing angle(H/V) CR>10  
Display colors  
1000:1  
20000:1 (with ASCR ON)  
170˚/160˚  
16.7M  
Response time  
2ms (Gray to Gray)  
SPLENDID™ Video  
Enhancement  
Yes  
SPLENDID™ selection  
Auto adjustment  
Color temperature selection  
Skin-Tone selection  
HDMI input  
5 video preset modes (by hotkey)  
Yes (by hotkey)  
5 color temperatures  
3 skin-tones  
HDMI (VW246H)  
DVI-D with HDCP (VW246H/U)  
D-Sub  
Digital input  
Analog input  
Audio-in port  
3.5 mm Mini-jack  
3.5 mm Mini-jack  
Black  
Earphone Jack  
Colors  
Speaker (Built-in)  
Power LED  
2W x 2 Stereo, RMS  
Blue (On)/ Amber (Standby)  
100 x 100mm  
VESA wall mount  
Tilt  
-3˚–20˚  
Kensington lock  
Voltage rating  
Power consumption  
Yes  
AC: 100~240V  
Power On : < 4ꢀW, Standby: < 2W, Power Off: <1W  
568 mm x 410 mm x 230 mm (machine)  
645 mm x 477 mm x 186 mm (package)  
Dimension (W x H x D)  
Weight (Esti.)  
5.5 kg (Net); 8 kg (Gross)  
0˚C–40˚C  
Temperature (Operating)  
Temperature  
-20˚C–60˚C  
(Non-operating)  
Humidity (Operating)  
Humidity (Non-operating)  
10%~ꢀ0%  
5%~ꢀ0%  
10 languages (English, German, Italian, French, Dutch, Spanish,  
Russian, Traditional Chinese, Simplified Chinese, Japanese)  
VGA cable, DVI cable, audio cable, power cord, quick start guide,  
warranty card  
Multi-languages  
Accessories  
Energy Star®, CB, CE, Gost-R, CCC, UL/cUL, FCC,  
Vista Premium (VW246H/U), Vista Basic (VW246S),  
C-Tick, BSMI, VCCI, RoHS, WEEE, PSB  
Regulation approvals  
*Specifications are subject to change without notice.  
12  
ASUS VW246/VK246 LCD Monitor  
3.3  
Troubleshooting (FAQ)  
Problem  
Possible Solution  
Power LED is not ON  
• Press the  
button to check if the monitor is in  
the ON mode.  
• Check if the power cord is properly connected to  
the monitor and the power outlet.  
The power LED lights amber and  
there is no screen image  
• Check if the monitor and the computer are in the  
ON mode.  
• Make sure the signal cable is properly connected  
the monitor and the computer.  
• Inspect the signal cable and make sure none of  
the pins are bent.  
• Connect the computer with another available  
monitor to check if the computer is  
properly working.  
Screen image is too light or dark  
• Adjust the Contrast and Brightness settings via  
OSD.  
Screen image is not centered or  
• Press the  
button for 2–3 seconds to  
sized properly  
automatically adjust the image (VGA input only).  
• Adjust the H-Position or V-Position settings via  
OSD (VGA input only).  
Screen image bounces or a wave  
pattern is present in the image  
• Make sure the signal cable is properly  
connected to the monitor and the computer.  
• Move away electrical devices that may cause  
electrical interference.  
Screen image has color defects (white • Inspect the signal cable and make sure that  
does not look white)  
none of the pins are bent.  
• Perform All Reset via OSD.  
• Adjust the R/G/B color settings or select the  
Color Temperature via OSD.  
Screen image is blurry or fuzzy  
• Press the  
button for 2–3 seconds to  
automatically adjust the image (VGA input only).  
• Adjust the Phase and Clock settings via OSD  
(VGA input only).  
No sound or sound is low (for models • Ensure that the audio cable is properly  
with speakers)  
connected to the monitor and the computer  
• Adjust the volume settings of both your  
monitor and computer.  
• Ensure that the computer sound card driver  
is properly installed and activated.  
Webcam is not working  
• Make sure that you have connected the USB cable  
securely to both the LCD monitor and your  
computer.  
• Make sure that you use the Microsoft® Windows®  
Vista / XP Service Pack 2 (3) operating systems.  
ASUS VW246/VK246 LCD Monitor  
13  
 
3.4  
Supported operating modes  
Resolution  
Frequency  
Vertical  
Frequency  
Horizontal  
Frequency  
Standard  
Pixel  
DOS  
VGA  
720 x 400  
640 x 480  
70Hz  
60Hz  
72Hz  
75Hz  
56Hz  
60Hz  
72Hz  
75Hz  
60Hz  
60Hz  
70Hz  
75Hz  
75Hz  
60Hz  
60Hz  
60Hz  
75Hz  
60Hz  
60Hz  
75Hz  
60Hz  
60Hz  
60Hz  
65Hz  
70Hz  
75Hz  
60Hz  
75Hz  
60Hz  
31.47KHz  
31.47KHz  
37.90KHz  
37.50KHz  
35.16KHz  
37.90KHz  
48.10KHz  
46.90KHz  
31.02KHz  
48.40KHz  
56.50KHz  
60.02KHz  
67.50KHz  
49.62KHz  
44.69KHz  
47.78KHz  
60.29KHz  
60.00KHz  
64.00KHz  
80.00KHz  
47.71KHz  
55.94KHz  
75KHz  
28.32MHz  
25.18MHz  
31.50MHz  
31.50MHz  
36.00MHz  
40.00MHz  
50.00MHz  
49.50MHz  
33.75MHz  
65.00MHz  
75.00MHz  
78.75MHz  
108.00MHz  
83.375MHz  
74.375MHz  
79.50MHz  
102.25MHz  
108.00MHz  
108.00MHz  
135.00MHz  
85.50MHz  
106.00MHz  
162.00MHz  
175.5MHz  
189.00MHz  
202.5MHz  
146.25MHz  
187MHz  
640 x 480  
640 x 480  
SVGA  
800 x 600  
800 x 600  
800 x 600  
800 x 600  
WVGA  
XGA  
848 x 480  
1024 x 768  
1024 x 768  
1024 x 768  
1152 x 864  
1280 x 800  
1280 x 720  
1280 x 768  
1280 x 768  
1280 x ꢀ60  
1280 x 1024  
1280 x 1024  
1366 x 768  
1440 x ꢀ00  
1600 x 1200  
1600 x 1200  
1600 x 1200  
1600 x 1200  
1680 x 1050  
1680 x 1050  
1ꢀ20 x 1080  
XGA+  
WXGA  
QVGA  
SXGA  
WXGA  
WXGA+  
UXGA  
81.25KHz  
87.5KHz  
93.75KHz  
65.29KHz  
82.30KHz  
74.03KHz  
WSXGA+  
Full HD (Primary)  
154MHz  
* Modes not listed in the table may not be supported. For optimal resolution, we recommend that  
you choose a mode listed in the table above.  
* This monitor supports Full HD (480i/p, 576i/p, 720p, 1080i/p) video contents from game consoles,  
DVD players and other consumer video devices.  
14  
ASUS VW246/VK246 LCD Monitor  
 

Hasty Bake Fiesta User Manual
GE 2 7730 User Manual
Electrolux EHE 688W User Manual
Diamond Multimedia Radeon 9800 Series User Manual
Diamond Multimedia Radeon 2400PRO512A User Manual
Bosch Appliances UML 191 90 User Manual
Belkin Bluetooth Wireless Desktop F8T042ukB User Manual
AT T 993 User Manual
Asus Computer Hardware A8N5X User Manual
AG Neovo Neovo X 174 User Manual