Z87-PRO
Contents
About this guide........................................................................................................ vii
Z87-PRO specifications summary............................................................................ ix
Installation tools and components.......................................................................... xv
1.1 Special features..........................................................................................1-1
Motherboard overview...............................................................................1-6
Building your PC system...........................................................................2-1
BIOS update utility...................................................................................2-12
iii
Starting up for the first time....................................................................2-18
Turning off the computer.........................................................................2-19
Knowing BIOS............................................................................................3-1
BIOS setup program..................................................................................3-2
My Favorites...............................................................................................3-6
Main menu ..................................................................................................3-7
Ai Tweaker menu........................................................................................3-9
Advanced menu .......................................................................................3-24
Monitor menu ...........................................................................................3-39
Boot menu ................................................................................................3-42
Tools menu ...............................................................................................3-48
Exit menu..................................................................................................3-50
Updating BIOS..........................................................................................3-51
Support DVD information..........................................................................4-1
iv
Software information.................................................................................4-3
RAID configurations ..................................................................................5-1
Creating a RAID driver disk.......................................................................5-7
Notices .................................................................................................................... A-1
v
Safety information
Electrical safety
•
To prevent electrical shock hazard, disconnect the power cable from the electrical outlet
before relocating the system.
•
When adding or removing devices to or from the system, ensure that the power cables
for the devices are unplugged before the signal cables are connected. If possible,
disconnect all power cables from the existing system before you add a device.
•
•
•
Before connecting or removing signal cables from the motherboard, ensure that all
power cables are unplugged.
Seek professional assistance before using an adapter or extension cord. These devices
could interrupt the grounding circuit.
Ensure that your power supply is set to the correct voltage in your area. If you are not
sure about the voltage of the electrical outlet you are using, contact your local power
company.
•
If the power supply is broken, do not try to fix it by yourself. Contact a qualified service
technician or your retailer.
Operation safety
•
•
•
•
Before installing the motherboard and adding devices on it, carefully read all the manuals
that came with the package.
Before using the product, ensure all cables are correctly connected and the power
cables are not damaged. If you detect any damage, contact your dealer immediately.
To avoid short circuits, keep paper clips, screws, and staples away from connectors,
slots, sockets and circuitry.
Avoid dust, humidity, and temperature extremes. Do not place the product in any area
where it may become wet.
•
•
Place the product on a stable surface.
If you encounter technical problems with the product, contact a qualified service
technician or your retailer.
vi
About this guide
This user guide contains the information you need when installing and configuring the
motherboard.
How this guide is organized
This guide contains the following parts:
•
Chapter 1: Product introduction
This chapter describes the features of the motherboard and the new technology it
supports. It includes description of the switches, jumpers, and connectors on the
motherboard.
•
•
•
•
Chapter 2: Basic installation
This chapter lists the hardware setup procedures that you have to perform when
installing system components.
Chapter 3: BIOS setup
This chapter tells how to change system settings through the BIOS Setup menus.
Detailed descriptions of the BIOS parameters are also provided.
Chapter 4: Software support
This chapter describes the contents of the support DVD that comes with the
motherboard package and the software.
Chapter 5: RAID support
This chapter describes the RAID configurations.
Where to find more information
Refer to the following sources for additional information and for product and software
updates.
1.
2.
ASUS websites
The ASUS website provides updated information on ASUS hardware and software
products. Refer to the ASUS contact information.
Optional documentation
Your product package may include optional documentation, such as warranty flyers,
that may have been added by your dealer. These documents are not part of the
standard package.
vii
Conventions used in this guide
To ensure that you perform certain tasks properly, take note of the following symbols used
throughout this manual.
DANGER/WARNING: Information to prevent injury to yourself when trying to
complete a task.
CAUTION: Information to prevent damage to the components when trying to
complete a task
IMPORTANT: Instructions that you MUST follow to complete a task.
NOTE: Tips and additional information to help you complete a task.
Typography
Bold text
Italics
Indicates a menu or an item to select.
Used to emphasize a word or a phrase.
<Key>
Keys enclosed in the less-than and greater-than sign
means that you must press the enclosed key.
Example: <Enter> means that you must press the Enter or
Return key.
<Key1> + <Key2> + <Key3> If you must press two or more keys simultaneously, the key
names are linked with a plus sign (+).
viii
Z87-PRO specifications summary
CPU
LGA1150 socket for the 4th Generation Intel® Core™ i7/Intel®
Core™i5/ Intel® Core™ i3, Pentium® and Celeron® processors
Supports 22nm CPU
Supports Intel® Turbo Boost Technology 2.0*
*
The Intel® Turbo Boost Technology 2.0 support depends on the CPU
types.
Chipset
Memory
Intel® Z87 Express Chipset
4 x DIMM, max. 32GB, DDR3 3000 (O.C.)* / 2933 (O.C.)* / 2800
(O.C.)* / 2666 (O.C.)* 2600 (O.C.)* / 2500 (O.C.)* / 2400 (O.C.)* /
2200(O.C.)* / 2133(O.C.)* / 2000 (O.C.)* / 1866(O.C.)* /
1800(O.C.)* /1600 / 1333 MHz, non-�CC, un-buffered memory
Dual channel memory architecture
Supports Intel® �xtreme Memory Profile (XMP)
*
Hyper DIMM support is subject to the physical characteristics of
individual CPUs. Please refer to Memory QVL (Qualified Vendors List)
for details.
Expansion slots
2 x PCI Express 3.0/2.0 x16 slots (single at x16 or dual at x8/x8
mode)
1 x PCI Express 2.0 x16 slot (max. at x4 mode, compatible with
PCIe x1 and x4 devices)*
4 x PCI Express 2.0 x1 slots**
*
The PCIe x16_3 slot shares bandwidth with PCIe x1_2/3/4 slots. The
PCIe x16_3 slot is set to x1 mode by default.
** The PCIe x1_2 shares bandwidth with SATA6G_E12. The SATA6G_E12
is enabled by default for system resource optimization.
VGA
Integrated Graphics Processor - Intel® HD Graphics support
Multi-VGA output support: DisplayPort/HDMI/DVI-D/VGA port
Supports DisplayPort 1.2* with max. resolution 4096 x 2160 @24Hz
and 3840 x 2160 @60Hz
Supports HDMI with max. resolution of 4096 x 2160 @24Hz and
2560 x 1600 @60Hz
Supports DVI with max. resolution of 1920 x 1200 @60Hz
Supports RGB with max. resolution of 1920 x 1200 @60Hz
Supports Intel® InTru™ 3D, Intel® Quick Sync Video, Intel® Clear
Video HD Technology, and Intel® Insider™
Supports up to three displays simultaneously
Maximum shared memory 1024MB
*
DisplayPort 1.2 Multi-Stream Transport compliant, supports
DisplayPort 1.2 monitor daisy chain up to 3 displays.
Multi-GPU support
LAN
Supports NVIDIA® Quad-GPU SLI™ Technology (with 2 PCIe x16
graphics cards)
Supports AMD® 3-WAY/Quad-GPU CrossFireX™ Technology
Intel® I217-V Gigabit LAN - Dual interconnect between the
integrated LAN controller and physical layer (PHY)
(continued on the next page)
ix
Z87-PRO specifications summary
Intel® Z87 Express Chipset with RAID 0, 1, 5, 10
Storage
-
-
6 x SATA 6.0 Gb/s ports (yellow)
Supports Intel® Dynamic Storage Accelerator, Intel® Smart
Response Technology, Intel® Rapid Start Technology, Intel®
Smart Connect Technology*
ASMedia® SATA 6Gb/s controller**
2 x SATA 6Gb/s ports (dark brown)
-
*
Supports on Intel® Core™ processor family.
** These SATA ports are for data hard drives only. ATAPI devices are not
supported.
Wireless Data Network
Speedy Wi-Fi 802.11 a/b/g/n supports dual frequency band 2.4/5
GHz
ASUS Wi-Fi GO! Utility
Bluetooth
Audio
Bluetooth v4.0
Bluetooth v3.0 + HS
Realtek® ALC1150 8-channel high definition audio COD�C
-
High quality 112dB SNR stereo playback output (Line-out at
rear) and 104dB SNR recording input (Line-in) support.
-
-
-
-
-
Absolute Pitch 192khz/24bit True BD Lossless Sound
BD audio layer content protection
DTS UltraPC II
DTS Connect
Supports jack-detection, multi-streaming and front panel jack-
retasking
-
Optical S/PDIF out ports at rear I/O
Intel® Z87 Express Chipset - supports ASUS USB 3.0
Boost
USB
-
-
-
2 x USB 3.0/2.0 ports at mid-board for front panel support
2 x USB 3.0/2.0 ports at rear panel (blue)
8 x USB 2.0/1.1 ports at mid-board
ASMedia® USB 3.0 controller - supports ASUS USB 3.0
Boost
-
4 x USB 3.0/2.0 ports at rear panel (blue)
ASUS Exclusive
features
ASUS Dual Intelligent Processors 4 with 4-Way
Optimization
-
4-Way Optimization tuning key perfectly consolidates
ASUS-exclusive DIGI+Power Control, TPU, EPU, and Fan
Xpert 2 that quickly optimize the digital power setting, system
performance, power saving and whole system cooling
configuration with just a click.
CPU Power
-
-
Industry leading digital 12-phase power design
ASUS CPU power utility
DRAM Power
-
-
Industry leading digital 2-phase DRAM power design
ASUS DRAM power utility
(continued on the next page)
x
Z87-PRO specifications summary
ASUS Exclusive
features
ASUS EPU
-
EPU, EPU switch
ASUS TPU
-
TurboV, GPU Boost, TPU switch
ASUS Fan Xpert 2
-
Featuring Fan Auto Tuning function for optimized speed
control.
ASUS Wi-Fi GO!
-
Wi-Fi GO! functions include Cloud GO!, Media Streaming Hub,
Smart Sensor Control, Remote Desktop, Remote Keyboard &
Mouse, File Transfer, Capture & Send
-
-
“Wi-Fi GO! & NFC Remote” for portable Smartphone/Tablet,
supporting iOS and Android systems.
Wi-Fi Engine’s Client and AP modes for network sharing and
connection.
ASUS Exclusive Features:
-
Network iControl featuring instant network bandwidth
domination for top network program in use
-
-
USB 3.0 Boost featuring speedy USB 3.0 transmission
USB Charger+ featuring quick-charging function for all smart
devices
-
-
-
-
-
Ai Charger+
Disk Unlocker
AI Suite 3
Anti Surge
MemOK!
ASUS Quiet Thermal Solution:
-
-
ASUS Fan Xpert 2
ASUS Fanless Design: Heat-sink solution
ASUS EZ DIY
-
ASUS USB BIOS Flashback with USB BIOS Flashback Wizard
for EZ BIOS download scheduling
-
ASUS UEFI BIOS EZ Mode featuring friendly graphics user
interface
-
-
-
ASUS O.C. Tuner
ASUS CrashFree BIOS 3
ASUS EZ Flash 2
ASUS Q-Design
-
-
-
-
-
ASUS Q-Code
ASUS Q-LED (CPU, DRAM, VGA, Boot Device LED)
ASUS Q-Slot
ASUS Q-DIMM
ASUS Q-Connector
(continued on the next page)
xi
Z87-PRO specifications summary
ASUS exclusive
overclocking features
Precision Tweaker 2
-
-
-
vCore: Adjustable CPU Core voltage at 0.001V increment
iGPU: Adjustable CPU Graphics voltage at 0.001V increment
vCCIO: Adjustable Analog and Digital I/O voltage at 0.001V
increment
-
-
vCCIN: Adjustable CPU Input voltage at 0.01V increment
vCCSA: Adjustable CPU System Agent voltage at 0.001V
increment
-
-
vDRAM Bus: Adjustable DRAM voltage control at 0.005V
increment
vPCH: Adjustable PCH voltage control at 0.0125 increment
SFS (Stepless Frequency Selection)
-
BCLK/PCI� frequency tuning from 80MHz up to 300MHz at
0.1MHz increment
Overclocking Protection
ASUS C.P.R.(CPU Parameter Recall)
-
Rear Panel I/O Ports
1 x PS/2 Keyboard/mouse combo port
1 x DisplayPort
1 x HDMI port
1 x DVI
1 x RGB
2 x ASUS Wi-Fi GO! SMA antenna ports (2TR2) (Wi-Fi 802.11
a/b/g/n and Bluetooth v4.0/3.0+HS)
1 x Optical S/PDIF Out port
1 x Intel® LAN (RJ-45) port
6 x USB 3.0/2.0 ports (blue, 1 supports USB BIOS Flashback)
8-channel Audio I/O ports
Internal I/O connectors
1 x 19-pin USB 3.0/2.0 connector supports additional 2 USB ports
4 x USB 2.0/1.1 connectors support additional 8 USB ports
8 x SATA 6.0 Gb/s connectors (6 x yellow; 2 x dark brown)
1 x 4-pin CPU Fan connector supports both 3-pin (DC mode) and
4-pin (PWM mode) CPU coolers control
1 x 4-pin CPU Optional Fan connector (CPU_OPT)
4 x 4-pin Chassis Fan connectors
1 x Front panel audio connector (AAFP)
1 x S/PDIF out header
1 x TPM connector
1 x 24-pin EATX Power connector
1 x 8-pin EATX 12V Power connector
System Panel (Q-Connector)
1 x MemOK! button
1 x Clear CMOS jumper
(continued on the next page)
xii
Z87-PRO specifications summary
Internal I/O connectors
1 x DirectKey button
1 x DRCT (DirectKey) connector
1 x BIOS Flashback button
1 x EPU switch
1 x TPU switch (advanced two-stage adjustments)
1 x Power-on switch
BIOS features
64 Mb Flash ROM, UEFI AMI BIOS, PnP, DMI2.7, WfM2.0, SM
BIOS 2.7, ACPI 5.0, Multi-language BIOS, ASUS EZ Flash 2, ASUS
CrashFree BIOS 3, My Favorites, Quick Note, Last Modified log,
F12 PrintScreen, F3 Shortcut functions, and ASUS DRAM SPD
(Serial Presence Detect) memory information
Manageability
WfM 2.0, DMI 2.7, WOL by PME, PXE
Support DVD contents
Drivers
ASUS Utilities
EZ Update
Anti-virus software (OEM version)
Form factor
ATX form factor: 12 in. x 9.6 in. (30.5 cm x 24.4 cm)
Specifications are subject to change without notice.
xiii
Package contents
Check your motherboard package for the following items
User Manual
ASUS Z87-PRO motherboard
User manual
Support DVD
4 x Serial ATA 6.0 Gb/s cables
1 x ASUS SLI™ bridge connector
1 x ASUS I/O Shield
1 x 2T2R dual-band Wi-Fi moving
antennas (Wi-Fi 802.11a/b/g/n
compliant)
1 x 2-in-1 ASUS Q-Connector kit
•
If any of the above items is damaged or missing, contact your retailer.
•
The illustrated items above are for reference only. Actual product specifications may
vary with different models.
•
The 1 x 2-in-1 ASUS Q-Connector kit is for retailer version only.
xiv
Installation tools and components
1 bag of screws
Philips (cross) screwdriver
PC chassis
Power supply unit
Intel® LGA1150 CPU
Intel® LGA1150 compatible CPU Fan
DIMM
SATA hard disk drive
SATA optical disc drive (optional)
Graphics card (optional)
The tools and components in the table above are not included in the motherboard package.
xv
xvi
Chapter 1:
Product Introduction
Product introduction
1
1.1
Special features
1.1.1
Product highlights
LGA1150 socket for 4th generation Intel® Core™ i7/Intel® Core™ i5/Intel®
Core™ i3, Pentium® and Celeron® processors
This motherboard supports 4th generation Intel® Core™ i7/Intel® Core™ i5/Intel® Core™i3,
Pentium®, and Celeron® processors in the LGA1150 package. It provides great graphics and
system performance with its GPU, dual-channel DDR3 memory slots and PCI Express 2.0/3.0
expansion slots.
Intel® Z87 Express Chipset
Intel® Z87 Express Chipset is a single chipset that supports the LGA1150 socket for 4th
generation Intel® Core™ i7/Intel® Core™ i5/Intel® Core™ i3, Pentium® and Celeron®
processors. It utilizes the serial point-to-point links, which increases bandwidth and enhances
the system’s performance. It natively supports up to six USB 3.0 ports for up to ten times
faster transfer rate than USB 2.0 and enables the iGPU function for Intel® integrated graphics
performance.
PCI Express® 3.0
PCI Express® 3.0 (PCIe 3.0) is the PCI Express bus standard that provides twice the
performance and speed of PCIe 2.0. It provides an optimal graphics performance,
unprecedented data speed and seamless transition with its complete backward compatibility
to PCIe 1.0/2.0 devices.
Dual-Channel DDR3 2800 (O.C.) / 2666 (O.C.) / 2600 (O.C.) / 2500 (O.C.) / 2400
(O.C.) / 2200 (O.C.) / 2133 (OC.) / 2000 (O.C.) / 1866 (O.C.) / 1800 (O.C.) / 11600 /
1333 MHz Support
The motherboard supports the dual-channel DDR3 memory that features data transfer rates
of DDR3 2800 (O.C.) / 2666 (O.C.) / 2600 (O.C.) / 2500 (O.C.) / 2400 (O.C.) / 2200 (O.C.) /
2133 (OC.) / 2000 (O.C.) / 1866 (O.C.) / 1800 (O.C.) / 1600 / 1333 MHz to boost the system’s
performance, and to meet the higher bandwidth requirements of 3D graphics, multimedia and
Internet applications.
Quad-GPU SLI and CrossFireX™ Support
This motherboard features the most powerful Intel® Z87 platform that optimizes PCIe
allocation in multi-GPU SLI and CrossFireX™ solution, giving you a brand-new gaming
enjoyment.
1-1
ASUS Z87-PRO
Intel® Smart Response Technology
Intel® Smart Response Technology, an important part of Green ASUS eco-friendly computing,
reduces load and wait time, eliminates unecessary hard drive spin thus lowering power
usage, and uses an installed SSD (requires 18.6 GB available space) as a cache for
frequently accessed data or applications. It combines SSD performance and hard drive
capacity, operating up to six times faster than a hard-drive-only system to boost the system’s
overall performance.
*
4th Generation Intel® Core™ processors family support Intel® Smart Response Technology.
** An operating system must be installed on the HDD to launch Intel® Smart Response Technology.
*** The SSD is reserved for caching function.
Intel® Smart Connect Technology
Your computer can receive fresh updates for selected applications, even when the system
is in sleep mode. This means less time waiting for applications to update and sync with the
cloud, leading to a more efficient computing experience.
Intel® Rapid Start Technology
Allows your computer to quickly resume from a low-power hibernate state in seconds. Saving
your system memory to the designated SSDs, it provides your computer a faster wake-up
response time, while still keeping the energy use low.
1.1.2
Dual Intelligent Processors 4 with 4-Way Optimization
ASUS Dual Intelligent Processors 4 brings system control solution to a totally whole new
level, combining TPU, EPU, DIGI+ Power Control and Fan Xpert 2 functions to push the
system’s performance to its optimal potential. It automatically pushes or reasonably balances
the system’s performance, power saving levels and fan settings via the user-friendly AI Suite
3 utility.
DIGI+ Power Control
ASUS DIGI+ Power Control features the revolutionary and innovative digital VRM, DRAM,
and CPU Voltage controllers. These controllers offers ultra-precise memory and voltage
tuning for optimal system efficiency, stability and performance.
TPU
TPU (Turbo Processing Unit), offers precise voltage control and advanced monitoring
mechanisms through the TurboV functions in your ASUS AI Suite 3 utility.
EPU
�PU (�nergy Processing Unit), the world’s first real-time system power-saving chip,
automatically detects the current system load and intelligently moderates power usage.
It offers a total system-wide energy optimization, reduces fan noise and extends the
component’s lifespan.
ASUS Fan Xpert 2
ASUS Fan Xpert 2 provides customizable settings for a cooler and quieter computing
environment. With its Fan Auto Tuning feature, ASUS Fan Xpert 2 automatically detects
and tweaks all fan speeds, and provides you with optimized fan settings based on the fans’
specifications and positions.
1-2
Chapter 1: Product introduction
1.1.3
ASUS Exclusive Features
Wi-Fi GO!
ASUS Wi-Fi GO! leads the way to a more enjoyable home entertainment. With ASUS Wi-Fi
GO!, you can wirelessly stream media files to your HDTV, remotely control and access your
computer using your smart device and easily transfer files between your computer and smart
device.
Conveniently use and enjoy these ASUS Wi-Fi GO! functions:
•
Cloud GO!: Allows you to control files and sync them all across cloud services in a few
clicks.
•
•
Media Streaming Hub: Allows you to stream media files to your HDTV.
Remote Desktop: Allows you to view your computer’s desktop and remotely operate
your computer in real-time from your smart device.
•
•
Remote Keyboard & Mouse: Allows you to use your smart device’s touch panel as a
remote keyboard and mouse for your computer.
Smart Sensor Control: Allows you to remotely control your computer using your smart
device’s customized gestures.
•
•
File Transfer: Allows you to transfer files between your computer and smart device.
Capture & Send: Allows you to take screenshots and send them to a smart device.
USB 3.0 Boost
ASUS USB 3.0 Boost, which supports USB 3.0 standard UASP (USB Attached SCSI
Protocol), significantly increases a USB device’s transfer speed up to 170% faster than the
already impressive USB 3.0 transfer speed. It automatically accelerates data speeds for
compatible USB 3.0 peripherals without the need for any user interaction.
USB Charger+
With a dedicated onboard controller, quick-charge all your smart devices such as
smartphones, tablets and more, all up to three times faster, even when the system is
powered off, in sleep or hibernation mode.
USB BIOS Flashback
USB BIOS Flashback offers a hassle-free updating solution for your ultimate convenience.
Install a USB storage device containing the BIOS file, press the BIOS Flashback button for
about three seconds, and the UEFI BIOS is automatically updated even without entering
the existing BIOS or operating system. It also allows you to regularly check for UEFI BIOS
updates, and download the latest BIOS automatically.
1-3
ASUS Z87-PRO
AI Suite 3
With its user-friendly interface, ASUS AI Suite 3 consolidates all the exclusive ASUS features
into one simple-to-use software package. It allows you to supervise overclocking, energy
management, fan speed control, voltage and sensor readings, and even interact with smart
devices via Wi-Fi. This all-in-one software offers diverse and ease to use functions, with no
need to switch back and forth between different utilities.
1.1.4
ASUS Quiet Thermal Solution
ASUS Fanless Design - Heat-sink solution
The stylish heatsink features a 0-dB thermal solution that offers you a noiseless PC
environment. The heatsink design also lowers the temperature of the chipset and power
phase area through high efficient heat-exchange. Combined with usability and aesthetics,
the ASUS stylish heatsink will give you an extremely silent and cooling experience with its
elegant appearance.
1.1.5
ASUS EZ DIY
ASUS UEFI BIOS (EZ Mode)
ASUS U�FI BIOS, a U�FI compliant architecture, offers the first mouse-controlled intuitive
graphical BIOS interface that goes beyond the traditional keyboard-only BIOS controls,
providing you with more flexibility, convenience, and easy to navigate U�FI BIOS than the
traditional BIOS versions. It offers you with dual selectable modes and native support for hard
drives larger than 2.2 TB.
ASUS UEFI BIOS includes the following new features:
•
•
•
•
•
•
New My Favorite function allows you to quickly access the frequently used items
New Quick Note function allows you to take notes in the BIOS environment
New log reminder allows you to view all your modified settings
F12 BIOS snapshot hotkey
F3 Shortcut for most accessed information
ASUS DRAM SPD (Serial Presence Detect) information detecting faulty DIMMs, and
helping with difficult POST situations.
1-4
Chapter 1: Product introduction
ASUS Q-connector
ASUS Q-Connector is a unique adapter that allows you to easily connect or disconnect the
chassis front panel cables to one module, eliminating the hassle of plugging one cable at a
time and making the connection quick and accurate.
1.1.6
Other special features
DTS Connect
To get the most out of your audio entertainment across all formats and quality levels, DTS
Connect combines two enabling technologies, DTS Neo:PC™ upmixes stereo sources (CDs,
MP3s, WMAs, internet radio) into as many as 7.1 channels of incredible surround sound.
Consumers can connect their PC to a home theater system. DTS Interactive is capable of
performing mult-channel encoding of DTS bitstreams on personal computers, and sending
encoded bitstreams out of a digital audio connection (such as S/PDIF or HDMI) designed to
deliver audio to an external decoder.
DTS UltraPC II
DTS UltraPC II delivers a superior surround sound experience through your system’s
speakers and headphones while monitoring and balancing the loudness level difference
between digital audio formats. It also ehnances the audio settings through augmenting
low and high frequencies of musical tones, restores compressed or re-mastered sounds,
improves bass performance even without a subwoofer, and improves dialogues derived from
DVD or Blu-ray Disc™.
ErP Ready
The motherboard is European Union’s Energy-related Products (ErP) ready, and ErP requires
products to meet certain energy efficiency requirement in regards to energy consumptions.
This is in line with ASUS vision of creating environment-friendly and energy-efficient products
through product design and innovation to reduce carbon footprint of the product and thus
mitigate environmental impacts.
1-5
ASUS Z87-PRO
1.2
Motherboard overview
Before you proceed
1.2.1
Take note of the following precautions before you install motherboard components or change
any motherboard settings.
•
•
Unplug the power cord from the wall socket before touching any component.
Before handling components, use a grounded wrist strap or touch a safely grounded
object or a metal object, such as the power supply case, to avoid damaging them due
to static electricity.
•
•
Hold components by the edges to avoid touching the ICs on them.
Whenever you uninstall any component, place it on a grounded antistatic pad or in the
bag that came with the component.
•
Before you install or remove any component, ensure that the ATX power supply is
switched off or the power cord is detached from the power supply. Failure to do so
may cause severe damage to the motherboard, peripherals, or components.
1-6
Chapter 1: Product introduction
Layout contents
Connectors/Jumpers/Slots
Page
1-44
1-9
1. ATX power connectors (24-pin EATXPWR, 8-pin EATX12V)
2. LGA1150 CPU socket
3. CPU, chassis, and power fan connectors (4-pin CPU_FAN, 4-pin
CPU_OPT, 4-pin CHA_FAN1-4 )
1-42
4. DDR3 DIMM slots
1-10
1-26
1-40
1-28
1-39
5. MemOK! button
6. USB 3.0 connector (20-1 pin USB3_12)
7. TPU switch
8. ASMedia® Serial ATA 6.0 Gb/s connectors
(7-pin SATA6G_E12 [dark brown])
9. Intel® Z87 Serial ATA 6.0 Gb/s connectors (7-pin SATA6G_1-6 [yellow])
1-38
1-29
1-30
1-46
1-45
1-41
2-12
1-27
1-32
1-25
1-43
1-46
1-39
10. EPU switch
11. Clear CMOS jumper
12. Direct connector (2-pin DRCT)
13. System panel connector (20-8 pin PANEL)
14. USB 2.0 connectors (10-1 pin USB78, USB910, USB1112, USB1314)
15. BIOS_FLBK button
16. DirectKey button
17. Q-Code LED
18. Power-on button
19. Front panel audio connector (10-1 pin AAFP)
20. TPM connector (20-1 pin TPM)
21. Digital audio connector (4-1 pin SPDIF_OUT)
1-8
Chapter 1: Product introduction
1.2.3
Central Processing Unit (CPU)
The motherboard comes with a surface mount LGA1150 socket designed for the 4th
Generation Intel® Core™ i7 / Intel® Core™ i5 / Intel® Core™ i3, Pentium® and Celeron®
processors.
•
•
Ensure that all power cables are unplugged before installing the CPU.
Ensure that you install the correct CPU designed for LGA1150 only. DO NOT install a
CPU designed for LGA1155 and LGA1156 sockets on the LGA1150 socket.
•
Upon purchase of the motherboard, ensure that the PnP cap is on the socket and
the socket contacts are not bent. Contact your retailer immediately if the PnP cap
is missing, or if you see any damage to the PnP cap/socket contacts/motherboard
components. ASUS will shoulder the cost of repair only if the damage is shipment/
transit-related.
•
•
Keep the cap after installing the motherboard. ASUS will process Return Merchandise
Authorization (RMA) requests only if the motherboard comes with the cap on the
LGA1150 socket.
The product warranty does not cover damage to the socket contacts resulting from
incorrect CPU installation/removal, or misplacement/loss/incorrect removal of the PnP
cap.
1-9
ASUS Z87-PRO
1.2.4
System memory
The motherboard comes with four Double Data Rate 3 (DDR3) Dual Inline Memory Modules
(DIMM) slots.
A DDR3 module is notched differently from a DDR or DDR2 module. DO NOT install a DDR
or DDR2 memory module to the DDR3 slot.
Recommended memory configurations
1-10
Chapter 1: Product introduction
Memory configurations
You may install 2GB, 4GB and 8GB unbuffered and non-ECC DDR3 DIMMs into the DIMM
sockets.
•
You may install varying memory sizes in Channel A and Channel B. The system maps
the total size of the lower-sized channel for the dual-channel configuration. Any excess
memory from the higher-sized channel is then mapped for single-channel operation.
•
•
•
According to Intel® CPU spec, DIMM voltage below 1.65V is recommended to protect
the CPU.
Always install DIMMs with the same CAS latency. For optimum compatibility, we
recommend that you obtain memory modules from the same vendor.
Due to the memory address limitation on 32-bit Windows® OS, when you install 4GB
or more memory on the motherboard, the actual usable memory for the OS can be
about 3GB or less. For effective use of memory, we recommend that you do any of the
following:
a) Use a maximum of 3GB system memory if you are using a 32-bit Windows® OS.
b) Install a 64-bit Windows® OS when you want to install 4GB or more on the
motherboard.
c) For more details, refer to the Microsoft® support site at http://support.microsoft.
com/kb/929605/en-us.
•
•
This motherboard does not support DIMMs made up of 512Mb (64MB) chips or less
(Memory chip capacity counts in Megabit, 8 Megabit/Mb = 1 Megabyte/MB).
The default memory operation frequency is dependent on its Serial Presence Detect
(SPD), which is the standard way of accessing information from a memory module.
Under the default state, some memory modules for overclocking may operate at a
lower frequency than the vendor-marked value. To operate at the vendor-marked
or at a higher frequency, refer to section 3.5 Ai Tweaker menu for manual memory
frequency adjustment.
•
•
For system stability, use a more efficient memory cooling system to support a full
memory load (4 DIMMs) or overclocking condition.
Memory modules with memory frequency higher than 2133MHz and their
corresponding timing or the loaded XMP profile is not the J�D�C memory standard.
The stability and compatibility of the memory modules depend on the CPU’s
capabilities and other installed devices.
•
Always install the DIMMS with the same CAS Latency. For an optimum compatibility,
we recommend that you install memory modules of the same version or data code (D/
C) from the same vendor. Check with the vendor to get the correct memory modules.
1-11
ASUS Z87-PRO
Z87-PRO Motherboard Qualified Vendors Lists (QVL)
DDR3 3000(O.C.) MHz capability
Vendors
Part No.
Size
SS/
DS
Chip
Brand
Chip
NO.
Timing
Voltage
DIMM socket
support
(Optional)
1
2
4
G.SKILL
F3-3000C12Q-16GTXDG(XMP)
16GB (4x4GB)
DS
-
-
12-14-14-35
1.65V
•
•
•
DDR3 2933(O.C.) MHz capability
Vendors
Part No.
Size
SS/
DS
Chip
Brand
Chip
NO.
Timing
Voltage
DIMM socket
support
(Optional)
1
2
4
G.SKILL
F3-2933C12Q-16GTXDG(XMP)
16GB (4x4GB)
DS
-
-
12-14-14-35
1.65V
•
•
•
DDR3 2800(O.C.) MHz capability
Vendors
Part No.
Size
SS/
DS
Chip
Brand
Chip
NO.
Timing
Voltage
DIMM socket
support (Optional)
1
•
•
•
•
•
•
•
2
•
•
•
•
•
•
•
4
•
G.SKILL
G.SKILL
G.SKILL
APACER
APACER
CORSAIR
CORSAIR
F3-2800C11Q-16GTXD(XMP)
F3-2800C12Q-32GTXD(XMP)
16GB (4x4GB)
32GB (4x8GB)
DS
DS
DS
DS
DS
DS
DS
-
-
-
-
-
-
-
-
-
-
-
-
-
-
11-13-13-35
12-13-13-35
12-14-14-35
12-14-14-35
12-14-14-35
11-14-14-35
12-14-14-36
1.65
1.65
1.65
1.65
1.65
1.65
1.65
•
F3-2800C12Q-32GTXDG(XMP) 32GB (4x8GB)
•
78.BAGH5.AFD0C
8GB (2x4GB)
16GB (2x8GB)
16GB (4x4GB)
16GB (4x4GB)
78.CAGH6.AFD0C
CMD16GX3M4A2800C11
CMD16GX3M4A2800C12
•
•
DDR3 2666(O.C.) MHz capability
Vendors
Part No.
Size
SS/ Chip
Chip Timing
Voltage DIMM socket
support (Optional)
DS
Brand NO.
1
•
•
•
•
•
•
•
•
•
2
•
•
•
•
•
•
•
•
•
4
•
•
•
•
•
•
•
APACER
APACER
78.BAGFF.AFC0C
78.CAGFF.AFD0C
16GB (4x4GB)
32GB (4x8GB)
16GB (4x4GB)
16GB (4x4GB)
16GB (4x4GB)
32GB (4x8GB)
8GB (2x4GB)
16GB (2x8GB)
16GB (4x4GB)
SS
DS
DS
DS
DS
DS
SS
DS
DS
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
12-13-13-35
1.65
1.65
1.65
1.65
1.65
1.65
1.65
1.65
1.65
12-13-13-35
11-13-13-35
11-13-13-35
10-12-12-31
11-13-13-35
11-13-13-35
11-13-13-35
9-11-9-27
CORSAIR CMD16GX3M4A2666C11
G.SKILL
G.SKILL
GEIL
F3-2666C11Q-16GTXD(XMP)
F3-2666C10Q-16GTXD(XMP)
GOC332GB2666C11QC(XMP)
TXD34G2666HC11CBK
TEAM
TEAM
TXD38G2666HC11CBK
G.SKILL
F3-2666CL10Q-16GBZHD(XMP)
1-12
Chapter 1: Product introduction
DDR3 2600(O.C.) MHz capability
Vendors
Part No.
Size
SS/
DS
Chip
Brand
Chip
NO.
Timing
Voltage
DIMM socket
support
(Optional)
1
2
4
ADATA
AX3U2600GW8G11-DG2
16GB (2x4GB)
DS
-
-
11-13-13-35
1.65V
•
•
•
DDR3 2500(O.C.) MHz capability
Vendors
Part No.
Size
SS/
DS
Chip
Brand
Chip
NO.
Timing
Voltage
DIMM socket
support
(Optional)
1
2
4
G.SKILL
F3-20000CL10Q-16GBZHD(XMP)
16GB (4x4GB)
DS
-
-
10-11-11-31
1.65
•
•
•
DDR3 2400(O.C.) MHz capability
Vendors
Part No.
Size
SS/
DS
Chip Chip
Brand NO.
Timing
Voltage DIMM socket
support (Optional)
1
•
•
•
•
•
2
•
•
•
•
•
4
•
•
•
•
•
A-DATA
Apacer
AX3U2400GC4G10(XMP)
78.BAGFL.AFD0C(XMP)
783BAGF3.AFD0C(XMP)
CMGTX8(XMP)
4GB
DS
DS
DS
SS
DS
-
-
-
-
-
-
-
-
-
-
10-12-12-31
11-12-12-30
11-11-11-30
10-12-10-30
10-12-12-31
1.65
-
8GB (2x4GB)
8GB (2x4GB)
8GB (4x2GB)
16GB (2x8GB)
Apacer
-
CORSAIR
CORSAIR
1.65
1.65
CMZ16GX3M2A2400C10
(Ver4.21)
CORSAIR
G.SKILL
G.SKILL
G.SKILL
G.SKILL
G.SKILL
GEIL
CMZ16GX3M4A2400C9R
(Ver4.13)(XMP)
16GB (4x4GB)
32GB (4x8GB)
16GB (4x4GB)
16GB (4x4GB)
4G (2x2GB)
DS
DS
DS
DS
DS
DS
DS
DS
SS
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
2400 9-11-11-31
10-12-12-31
11-11-11-31
11-11-11-31
9-11-9-28
1.65
1.65
1.65
1.65
1.65
1.65
1.65
1.65
1.65
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
F3-19200CL10Q-
32GBZHD(XMP)
F3-19200CL11Q-
16GBZHD(XMP)
F3-19200CL11Q-
16GBZHD(XMP)
F3-19200CL9D-
4GBPIS(XMP)
F3-19200CL9Q-
16GBZMD(XMP)
16GB (4x4GB)
16GB (4x4GB)
16GB (4x4GB)
8GB (4x2GB)
9-11-11-31
•
•
•
•
GOC316GB2400
C10QC(XMP)
10-11-11-30
11-11-11-30
11-13-11-30
GEIL
GOC316GB2400
C11QC(XMP)
Kingston
KHX2400C11D3
K4/8GX(XMP)
KINGSTON KHX24C11K4/16X(XMP)
KINGSTON KHX24C11T2K2/8X(XMP)
KINGSTON KHX24C11T3K4/32X(XMP)
16GB (4x4GB)
8GB (2x4GB)
32GB (4x8GB)
4GB (2x2GB)
8GB (2x4GB)
8GB (2x4GB)
8GB
DS
DS
DS
DS
DS
DS
DS
-
-
-
-
-
-
-
-
-
-
-
-
-
-
11-13-13-30
-
1.65
1.65
1.65
1.66
1.65
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
9-9-9-24
9-11-9-27
11-11-11-30
Patriot
Patriot
Patriot
Team
PVV34G2400C 9K(XMP)
PXD38G2400C 11K(XMP)
PXD38G2400C 11K(XMP)
•
•
•
2400 11-11-11-30 1.65
10-12-12-31 1.65
TXD38G2400HC
10QBK(XMP)
1-13
ASUS Z87-PRO
DDR3 2200(O.C.) MHz capability
Vendors
Part No.
Size
SS/
DS
Chip
Brand
Chip
NO.
Timing
Voltage
DIMM socket
support
(Optional)
1
•
2
•
4
G.SKILL
GEIL
F3-17600CL7D-4GBFLS(XMP)
GET34GB2200C9DC(XMP)
GET38GB2200C9ADC(XMP)
4GB (2x2GB)
4GB (2x2GB)
8GB (2x4GB)
DS
DS
DS
-
-
-
-
-
-
7-10-10-28
9-10-9-28
9-11-9-28
1.65
1.65
1.65
•
•
•
•
GEIL
•
•
DDR3 2133(O.C.) MHz capability
Vendors
Part No.
Size
SS/
DS
Chip
Brand NO.
Chip Timing
Voltage
DIMM socket
support
(Optional)
1
•
•
•
•
•
2
•
•
•
•
•
4
•
•
•
•
•
A-DATA
A-DATA
Apacer
AX3U2133XC4G10(XMP)
AX3U2133XW8G10(XMP)
78.BAGE4.AFD0C(XMP)
AHU04GFB33CAQ3R(XMP)
4GB
DS
DS
DS
DS
DS
-
-
-
-
-
-
-
-
-
-
10-11-11-30
10-11-11-30
9-9-9-24
1.65
1.65
-
8GB
8GB (2x4GB)
4GB
Apacer
11-13-13-31
9-11-10-27
-
CORSAIR
CMD8GX3M2A2133C9
(Ver1.5)(XMP)
8GB (2x4GB)
1.5
CORSAIR
CMT4GX3M2B2133C9(Ver
7.1)(XMP)
4GB (2x2GB)
DS
-
-
9-10-9-27
1.5
•
•
•
CORSAIR
G.SKILL
CMT4GX3M2B2133C9(XMP)
4GB (2x2GB)
64GB (8x8GB)
DS
DS
-
-
-
-
9-10-9-27
1.5
1.5
•
•
•
•
•
•
F3-17000CL11Q2-
64GBZLD(XMP)
11-11-11-30
G.SKILL
G.SKILL
G.SKILL
G.SKILL
F3-17000CL9Q-
16GBXLD(XMP)
16GB (4x4GB)
16GB (4x4GB)
8GB (2x4GB)
16GB (4x4GB)
DS
DS
DS
DS
-
-
-
-
-
-
-
-
9-11-9-28
9-11-10-28
9-9-9-24
1.65
1.65
1.65
1.65
•
•
•
•
•
•
•
•
•
•
•
F3-17000CL9Q-
16GBZH(XMP)
F3-17066CL9D-
8GBPID(XMP)
F3-17066CL9Q-
16GBTDD(XMP)
9-9-9-24
G.SKILL
F3-2133C11Q-32GZL(XMP)
32GB (4x8GB)
16GB (4x4GB)
DS
DS
-
-
-
-
11-11-11-31
11-12-11-30
1.5
•
•
•
•
•
•
KINGSTON
KHX2133C11D3K4/
16GX(XMP)
1.65
KINGSTON
KHX2133C11D3T1K2/
16GX(XMP)
16GB (2x8GB)
DS
-
-
9-9-9-24
1.6
•
•
•
•
KINGSTON
OCZ
KHX21C11T3FK8/64X(XMP)
OCZ3XTEP2133C 9LV4GK
PV316G213C1K (XMP)
64GB (8x8GB)
2GB
DS
DS
DS
DS
DS
DS
DS
DS
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
9-9-9-24
1.5
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
7-7-7-20
1.65
1.5
Patriot
Patriot
Patriot
Patriot
Team
16GB (2x8GB)
4GB (2x2GB)
8GB (2x4GB)
8GB (2x4GB)
11-11-11-30
9-11-9-27
•
•
•
•
•
•
PVV34G2133C9 K(XMP)
PXD38G2133C1 1K(XMP)
PXD38G2133C11 K(XMP)
1.66
1.65
1.5
9-9-9-24
2133 11-11-11-27
11-11-11-31
11-11-11-31
TLD38G2133HC11A BK(XMP) 8GB
1.65
1.65
Team
TXD34096M2133HC11A-
V(XMP)
4GB
1-14
Chapter 1: Product introduction
DDR3 2000(O.C.) MHz capability
Vendors
Part No.
Size
SS/
DS
Chip
Brand
Chip NO.
Timing
Voltage DIMM socket
support
(Optional)
1
•
2
•
4
•
AEXEA
AEXEA
Apacer
Asint
AXA3ES2G2000LG28V(XMP)
AXA3ES4GK2000LG28V(XMP)
78.AAGD5.9KD(XMP)
2GB
DS
DS
DS
DS
-
-
-
-
-
1.65
4GB (2x2GB)
6GB (3x2GB)
4GB
-
-
1.65
•
•
•
-
9-9-9-27
9-9-9-27
-
-
•
•
•
SLA302G08-ML2HB(XMP)
Hynix
H5TQ2G83BF
RH9C
•
•
•
G.SKILL
G.SKILL
GEIL
F3-16000CL9D-4GBRH(XMP)
F3-16000CL9D-4GBTD(XMP)
GUP34GB2000C9DC(XMP)
PV736G2000ELK(XMP)
4GB (2x2GB)
4GB (2x2GB)
4GB (2x2GB)
6GB (3x2GB)
12GB (3x4GB)
2GB
DS
DS
DS
DS
DS
DS
-
-
-
-
-
-
-
-
-
-
-
-
9-9-9-24
9-9-9-24
9-9-9-28
7-7-7-20
9-11-9-27
-
1.65
1.65
1.65
1.65
1.65
-
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Patriot
Patriot
PX7312G2000ELK(XMP)
SP002GBLYU200S02(XMP)
Silicon
Power
Team
Team
Team
TXD32048M2000C9(XMP)
TXD32048M2000C9-L(XMP)
TXD32048M2000C9-L(XMP)
2GB
2GB
2GB
DS
DS
DS
Team
Team
Team
T3D1288RT-20 9-9-9-24
T3D1288LT-20 9-9-9-24
1.5
1.5
1.6
•
•
•
•
•
•
•
T3D1288RT-20 9-9-9-24
DDR3 1866(O.C.) MHz capability
Vendors
Part No.
Size
SS/
DS
Chip
Brand
Chip Timing
NO.
Voltage DIMM socket
support
(Optional)
1
2
4
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CMD16GX3M2A1866C9
(Ver5.29)(XMP)
16GB (2x8GB)
16GB (4x4GB)
16GB (4x4GB)
8GB (2x4GB)
8GB (2x4GB)
8GB (2x4GB)
32GB (4x8GB)
16GB (4x4GB)
16GB (4x4GB)
32GB (4x8GB)
32GB (4x8GB)
8GB (2x4GB)
DS
DS
DS
DS
DS
DS
DS
DS
DS
DS
DS
DS
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
1866 9-9-9-27
9-10-9-27
9-10-9-27
-
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
•
•
CMD16GX3M4A1866C9
(Ver4.13)(XMP)
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
CMD16GX3M4A1866C9
(Ver8.16)(XMP)
CMD8GX3M2A1866C9
(Ver4.13)(XMP)
CMD8GX3M2A1866C9
(Ver5.12)(XMP)
9-10-9-27
9-10-9-27
9-10-9-27
9-10-9-27
9-10-9-27
10-11-10-27
10-11-10-27
9-10-9-27
CMD8GX3M2A1866C9
(Ver8.16)(XMP)
CMT32GX3M4X1866C9(Ver3
.23)(XMP)
•
•
•
•
•
•
CMZ16GX3M4X1866C9R
(Ver8.16)(XMP)
CMZ16GX3M4X1866C9R(Ver
8.16)(XMP)
CMZ32GX3M4X1866C10
(Ver3.23)(XMP)
CMZ32GX3M4X1866C10(Ver
3.23)(XMP)
CMZ8GX3M2A1866C9
(Ver8.16)(XMP)
(continued on the next page)
1-15
ASUS Z87-PRO
DDR3 1866(O.C.) MHz capability
Vendors
Part No.
Size
SS/
DS
Chip
Brand
Chip Timing
NO.
Voltage DIMM socket
support
(Optional)
1
•
2
•
4
CORSAIR
CORSAIR
CMZ8GX3M2A1866C9(XMP)
8GB (2x4GB)
8GB (2x4GB)
DS
DS
-
-
-
-
9-10-9-27
1.5
1.5
CMZ8GX3M2A1866C9G
(Ver5.12)(XMP)
1866 9-10-9-27
•
•
•
•
•
Crucial
BLE4G3D1869DE1XT0.16F
MD(XMP)
4GB
DS
DS
-
-
-
-
9-9-9-27
1.5
1.5
•
•
•
•
G.SKILL
F3-14900CL10Q2-
64GBZLD(XMP)
64GB (8x8GB)
8GB (2x4GB)
10-11-10-30
G.SKILL
G.SKILL
G.SKILL
G.SKILL
G.SKILL
KINGSTON
Patriot
F3-14900CL9D-8GBSR(XMP)
DS
DS
DS
DS
DS
DS
SS
DS
DS
DS
DS
DS
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
9-10-9-28
9-10-9-28
9-10-9-28
9-9-9-24
1.5
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
F3-14900CL9Q-16GBXL(XMP) 16GB (4x4GB)
F3-14900CL9Q-16GBZL(XMP) 16GB (4x4GB)
F3-14900CL9Q-8GBFLD(XMP) 8GB (2x4GB)
1.5
1.5
1.6
F3-1866C9Q-32GXM(XMP)
KHX1866C9D3K2/8GX(XMP)
PXD34G1866ELK(XMP)
PXD38G1866ELK(XMP)
PXD38G1866ELK(XMP)
PXD38G1866ELK(XMP)
TLD34G1866HC9KBK(XMP)
TLD38G1866HC10SBK(XMP)
32GB (4x8GB)
8GB (2x4GB)
4GB (2x2GB)
8GB (2x4GB)
8GB (2x4GB)
8GB (2x4GB)
4GB
9-10-9-28
-
1.5
1.65
1.65
1.65
1.65
1.5
9-9-9-24
Patriot
9-11-9-27
9-11-9-27
1866 9-10-9-27
9-11-9-27
10-11-10-30
Patriot
Patriot
Team
1.5
Team
8GB
1.5
DDR3 1800(O.C.) MHz capability
Vendors
Part No.
Size
SS/ Chip
Chip
NO.
Timing
Voltage DIMM socket
support
DS
Brand
(Optional)
1
2
4
G. SKILL
F3-14400CL9D-4GBRL(XMP)
4GB (2x2GB)
DS
9-9-9-24
1.6
•
•
•
DDR3 1600 MHz capability
Vendors
Part No.
Size
SS/
DS
Chip
Brand
Chip NO.
Timing
Voltage
DIMM socket
support (Optional)
1
•
•
•
•
•
•
•
2
•
•
•
•
•
•
•
4
•
•
•
•
•
•
•
A-DATA
A-DATA
A-DATA
A-DATA
AMD
AD3U1600C2G11
AD3U1600C4G11
AD3U1600W4G11
AD3U1600W8G11
AE32G1609U1-U
AE34G1609U2-U
2GB
SS
DS
SS
DS
SS
DS
DS
MICRON
MICRON
A-DATA
A-DATA
AMD
D9PFJ
11-11-11-28
11-11-11-28
11-11-11-28
11-11-11-28
-
-
4GB
D9PFJ
-
4GB
3WCD-1211A
3WCD-1211A
23EY4587MB6H
23EY4587MB6H
-
-
8GB
-
2GB
1.5
1.5
1.65
AMD
4GB
AMD
-
AMD
AP38G1608U
2K(XMP)
8GB (2x4GB)
-
9-9-9-28
Apacer
Apacer
78.B1GE3.9L10C
78.B1GET.9K00C
4GB
4GB
DS
SS
Apacer
Apacer
AM5D5908DEQSCK
-
1.65
-
•
•
•
•
•
•
AM5D6008BQQSCK 11-11-11-28
(continued on the next page)
1-16
Chapter 1: Product introduction
DDR3 1600 MHz capability
Vendors
Part No.
Size
SS/
DS
Chip
Brand
Chip NO.
Timing
Voltage
DIMM socket
support
(Optional)
1
2
4
Apacer
78.C1GET.9K10C
8GB
DS
Apacer
AM5D6008 11-11-
-
•
•
•
BQQSCK
11-31
Apacer
Apacer
AHU04GFA60C9Q1D(XMP)
AHU04GFA60C9Q3R(XMP)
4GB
4GB
DS
DS
-
-
-
-
9-9-9-27
1.65
-
•
•
•
•
•
•
11-11-
11-28
Apacer
Asint
AHU08GFA60CBT3R(XMP)
SLA302G08-EGG1C(XMP)
8GB
4GB
DS
DS
-
-
9-9-9-24
9-9-9-27
-
-
•
•
•
•
•
•
Asint
302G08-
GG1C
Asint
SLA302G08-EGJ1C(XMP)
SLA302G08-EGN1C
SLB304G08-EGN1B
SLZ302G08-EGN1C
SLZ3128M8-EGJ1D(XMP)
AQ12M64B8BKK0S
4GB
4GB
8GB
2GB
2GB
4GB
DS
DS
DS
SS
DS
DS
DS
DS
DS
DS
DS
DS
DS
DS
SS
DS
DS
DS
DS
DS
SS
DS
SS
DS
Asint
302G08-
GJ1C
9-9-9-27
-
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Asint
ASint
302G08-
GN1C
-
-
Asint
ASint
304G08-
GN1B
-
-
Asint
ASint
302G08-
GN1C
-
-
Asint
Asint
3128M8-
GJ1D
-
-
ATP
SAMSUNG
K4B2G
08460
-
NO
1.5
1.5
1.5
1.65
•
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
Crucial
CMD16GX3M2A1600C9
(Ver8.21)(XMP)
16GB
(2x8GB)
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
9-9-9-24
CMD8GX3M2A1600C8
(Ver5.12)(XMP)
8GB
(2x4GB)
1600
8-8-8-24
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
CMD8GX3M2A1600C9
(Ver2.12)(XMP)
8GB
(2x4GB)
9-9-9-24
CMG4GX3M2A1600C6
4GB
(2x2GB)
6-6-6-18
CML16GX3M4X1600C8(Ver
2.12)(XMP)
16GB
(4x4GB)
Heat-Sink 1.5
Package
CMP6GX3M3A1600C8(XMP)
CMP6GX3M3A1600C8(XMP)
CMX6GX3M3C1600C7(XMP)
6GB
(3x2GB)
8-8-8-24
8-8-8-24
7-8-7-20
9-9-9-24
1.65
6GB
(3x2GB)
1.65
1.65
1.65
1.5
6GB
(3x2GB)
CMX8GX3M2A1600C9
(Ver3.19)(XMP)
8GB
(2x4GB)
CMZ16GX3M2A1600C10
(Ver.3.24)(XMP)
16GB
(2x8GB)
10-10-
10-27
CMZ16GX3M4A1600C9(XMP)
16GB
(4x4GB)
9-9-9-24
1.5
CMZ32GX3M4X1600C10
(Ver2.2)(XMP)
32GB
(4x8GB)
10-10-
10-27
1.5
CMZ8GX3M2A1600C8(XMP)
8GB
(2x4GB)
8-8-8-24
9-9-9-24
9-9-9-24
9-9-9-24
8-8-8-24
8-8-8-24
1.5
CMZ8GX3M2A1600C9(XMP)
8GB
(2x4GB)
1.5
CMZ8GX3M4X1600C9(Ver
2.12)(XMP)
8GB
(4x2GB)
1.5
HX3X12G1600C9(XMP)
12GB
(6x2GB)
1.6
BL12864BN1608 .8FF(XMP)
2GB
(2x1GB)
1.65
1.5
Crucial
BLT4G3D1608DT1TX0.16F
M(XMP)
4GB
(continued on the next page)
1-17
ASUS Z87-PRO
DDR3 1600 MHz capability
Vendors
Part No.
Size
SS/
DS
Chip
Brand
Chip NO.
Timing
Voltage
DIMM socket
support (Optional)
1
2
4
EK Memory
EK Memory
Elixir
EKM324L28BP8-
I16(XMP)
4GB (2x2GB)
4GB (2x2GB)
DS
DS
SS
DS
DS
DS
DS
DS
DS
DS
DS
DS
DS
DS
DS
-
-
-
9
9
-
•
•
•
EKM324L28BP8-
I16(XMP)
-
-
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
M2X2G64CB88 G7N- 2GB
DG(XMP)
Elixir
N2CB2G80GN- 9-9-9-28
DG
-
Elixir
M2X4G64CB8HG
5N-DG(XMP)
4GB
Elixir
N2CB2G80GN- 9-9-9-28
DG
-
Elixir
M2X8G64CB8HB
5N-DG(XMP)
8GB
Elixir
N2CB4G80BN- 9-9-9-28
DG
1.5
1.6
1.6
1.35
1.5
1.25
1.5
1.5
1.5
1.6
1.6
G.SKILL
G.SKILL
G.SKILL
G.SKILL
G.SKILL
G.SKILL
G.Skill
F3-12800CL7D-
8GBRH(XMP)
8GB (2x4GB)
16GB (4x4GB)
8GB (2x4GB)
8GB (2x4GB)
8GB (2x4GB)
16GB (4x4GB)
16GB (4x4GB)
32GB (4x8GB)
16GB (4x4GB)
4GB (2x2GB)
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
7-8-7-24
7-8-7-24
8-8-8-24
9-9-9-24
9-9-9-24
9-9-9-24
9-9-9-24
-
•
•
F3-12800CL7Q-
16GBXH(XMP)
F3-12800CL8D-
8GBECO(XMP)
F3-12800CL9D-
8GBRL(XMP)
•
•
•
•
•
•
•
F3-12800CL9D-
8GBSR2(XMP)
F3-12800CL9Q-
16GBXL(XMP)
F3-12800CL9Q-
16GBZL(XMP)
G.SKILL
GEIL
F3-1600C9Q-
32GXM(XMP)
GET316GB160
0C9QC(XMP)
9-9-9-28
7-7-7-24
GEIL
GUP34GB160
0C7DC(XMP)
GoodRam
KINGMAX
GR1600D364L9/2G
2GB
2GB
DS
SS
GoodRam
KINGMAX
GF1008KC-JN
N/A
-
-
-
•
•
•
•
•
•
FLGE85F-
C8KL9A(XMP)
9-9-9-28
KINGMAX
FLGF65F-
C8KL9A(XMP)
4GB
DS
DS
DS
DS
DS
DS
DS
DS
DS
DS
DS
DS
KINGMAX
N/A
9-9-9-28
-
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
KINGSTON
KINGSTON
KINGSTON
KINGSTON
KINGSTON
KINGSTON
KINGSTON
KINGSTON
KINGSTON
KINGSTON
KINGSTON
KHX1600C9D3K3/
12GX(XMP)
12GB (3x4GB)
12GB (3x4GB)
6GB (3x2GB)
6GB (3x2GB)
16GB (4x4GB)
24GB (6x4GB)
32GB (8x4GB)
8GB (2x4GB)
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
1.65
1.65
1.65
1.65
1.65
1.65
1.65
1.35
1.5
KHX1600C9D3K3/
12GX(XMP)
9
KHX1600C9D3K3/
6GX(XMP)
9
KHX1600C9D3K3/
6GX(XMP)
9
KHX1600C9D3K4/
16GX(XMP)
9-9-9-24
KHX1600C9D3K6/
24GX(XMP)
9
KHX1600C9D3K8/
32GX(XMP)
9-9-9-27
KHX1600C9D3LK2/
8GX(XMP)
9-9-9-24
KHX1600C9D3P1K2/ 8GB (2x4GB)
8G
9
9
9
KHX1600C9D3T
1BK3/12GX(XMP)
12GB (3x4GB)
1.65
1.65
KHX1600C9D3T1K3/ 6GB (3x2GB)
6GX(XMP)
•
(continued on the next page)
1-18
Chapter 1: Product introduction
DDR3 1600 MHz capability
Vendors
Part No.
Size
SS/
DS
Chip
Brand
Chip NO.
Timing
Voltage
DIMM socket
support (Optional)
1
2
4
KINGSTON
KINGSTON
KINGSTON
KINGSTON
KHX16C10B1K2/
16X(XMP)
16GB
(2x8GB)
DS
DS
DS
-
-
-
-
-
-
-
1.5
1.5
1.5
•
•
•
KHX16C9K2/16
KHX16C9P1K2/16
KVR16N11/4
16GB
(2x8GB)
1333-9-
9-9-24
•
•
•
•
16GB
(2x8GB)
-
•
4G
DS
DS
DS
Hynix
H5TQ2G83CFRPBC
-
-
-
1.5
-
•
•
•
•
•
•
•
•
•
KINGTIGER KTG2G1600PG3(XMP) 2GB
-
-
MICRON
MICRON
MICRON
Mushkin
Mushkin
OCZ
MT16JTF1G64AZ-
1G6D1
8GB
4GB
2GB
MICRON
D9PBC
1.5
MT16KTF51264AZ-
1G6M1
DS
SS
DS
DS
DS
DS
DS
DS
DS
DS
DS
DS
DS
DS
DS
DS
MICRON
D9PFJ
-
-
-
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
MT8KTF25664AZ-
1G6M1
MICRON
D9PFJ
-
•
•
996805(XMP)
4GB
(2x2GB)
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
6-8-6-
24
1.65
1.65
1.65
1.65
1.5
998805(XMP)
6GB
(3x2GB)
6-8-6-
24
OCZ3BE1600C8LV4GK 4GB
(2x2GB)
8-8-8
Patriot
Patriot
Patriot
Patriot
Patriot
Patriot
Patriot
Patriot
Patriot
Patriot
Patriot
PGD316G1600E
LK(XMP)
16GB
(2x8GB)
-
•
•
•
PGD316G1600E
LK(XMP)
16GB
(2x8GB)
9-9-
9-24
PGD38G1600EL
K(XMP)
8GB
(2x4GB)
9-9-9-
24
1.65
1.5
PGD38G1600E
LK(XMP)
8GB
(2x4GB)
9-9-9-
24
PGS34G1600LLKA
4GB
(2x2GB)
7-7-7-
20
1.7
•
•
•
•
•
•
•
PGS34G1600LL KA2
4GB
(2x2GB)
8-8-8-
24
1.7
PV316G160C9Q
KRD(XMP)
16GB
(4x4GB)
9-9-9-
24
1.5
PV38G160C9KR
D(XMP)
8GB
(2x4GB)
9-9-9-
24
1.5
PVV38G1600L
LK(XMP)
8GB
(2x4GB)
8-9-8-
24
1.65
1.65
1.65
PX7312G1600L
LK(XMP)
12GB
(3x4GB)
8-9-8-
24
PXD38G1600LL
K(XMP)
8GB
(2x4GB)
1600 8-
9-8-24
PSC
AL9F8L93B-GN2E
ALAF8L93B-GN2E
SMD-4G68HP-16KZ
SMD-4G68NG-16KK
4GB
8GB
4GB
4GB
2GB
SS
DS
DS
DS
SS
PSC
A3P4GF3BLF
-
-
-
-
-
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
PSC
PSC
A3P4GF3BLF
-
SanMax
SanMax
Hynix
H5TQ2G83BFRPBC
J2108BDBG-GN-F
20YT5NG
1.5
-
ELPIDA
S-POWER
Silicon
Power
SP002GBLTU16
0V02(XMP)
9-11-
11-28
1.5
Silicon
Power
SP004GBLTU16
0V02(XMP)
4GB
4GB
8GB
8GB
DS
DS
DS
DS
S-POWER
Hynix
20YT5NG
9-9-9-
24
1.5
1.5
-
•
•
•
•
•
•
•
•
•
•
•
•
Team
TXD34096M1600HC9-
D(XMP)
H5TC2G83BFRH9A
TK963EBF3
9-9-9-
24
Transcend
Transcend
JM1600KLH-
8G(626633)
Transcend
SAMSUNG
-
TS1GLK64V
6H(620945)
K4B4G0846B
-
-
1-19
ASUS Z87-PRO
DDR3 1333 MHz capability
Vendors
Part No.
Size
SS/
DS
Chip Brand Chip NO.
Timing
Voltage DIMM socket
support (Optional)
1
2
4
ACTICA
ACTICA
ACTICA
ACTICA
ACTICA
ACTICA
ACTICA
ACTICA
AMD
ACT1GHU64B
8F1333S
1GB
1GB
2GB
2GB
2GB
SS
SS
DS
DS
DS
DS
DS
DS
SS
DS
SAMSUNG
SAMSUNG
Micron
K4B1G0846F
-
-
-
-
-
-
-
-
-
-
-
•
•
•
ACT1GHU72C
8G1333S
K4B1G0846F(ECC)
D9KPT
-
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
ACT2GHU64B
8G1333M
-
ACT2GHU64B
8G1333S
SAMSUNG
Micron
K4B1G0846F
-
ACT2GHU72D
8G1333M
D9KPT(ECC)
-
ACT2GHU72D8 2GB
G1333S
SAMSUNG
Hynix
K4B1G0846F(ECC)
H5TQ2G83AFR
H5TQ2G83AFR(ECC)
23EY4587MB3H
23EY4587MB3H
-
ACT4GHU64B8 4GB
H1333H
-
ACT4GHU72D8 4GB
H1333H
Hynix
-
AE32G1339U1- 2GB
U
AMD
1.5
1.5
AMD
AE34G1339U2- 4GB
U
AMD
Apacer
Apacer
78.A1GC6.9L1
2GB
4GB
DS
DS
Apacer
Apacer
AM5D5808FEQSBG
AM5D5908CEHSBG
9
9
-
-
•
•
•
•
•
•
78.B1GDE.9L
10C
Asint
Asint
ATP
SLA302G08-
EDJ1C
2GB
4GB
4GB
SS
DS
DS
ASint
302G08-DJ1C
-
-
-
-
-
-
-
•
•
•
•
•
•
•
•
•
SLZ302G08-
EDJ1C
ASint
302G08-DJ1C
AQ12M72E8B
KH9S
SAMSUNG
K4B2G0846C(ECC)
BUFFALO
BUFFALO
BUFFALO
CORSAIR
D3U1333-1G
D3U1333-2G
D3U1333-4G
1GB
2GB
4GB
SS
DS
DS
SS
Elpida
Elpida
NANYA
-
J1108BFBG-DJ-F
J1108BFBG-DJ-F
NT5CB256M8BN-CG
N/A
-
-
-
-
•
•
•
•
•
•
•
•
•
•
•
•
CMV4GX3M2A 4GB (2x2GB)
1333C9
9-9-9-24
9-9-9-24
9-9-9-24
CORSAIR
CORSAIR
CMV8GX3M2A 8GB (2x4GB)
1333C9
DS
DS
-
-
N/A
-
-
•
•
•
•
•
CMX8GX3M1A 8GB
1333C9
1.5
(Ver2.2)
CORSAIR
CMX8GX3M1A 8GB
1333C9
DS
-
-
9-9-9-24
1.5
•
•
(Ver3.23)
CORSAIR
CORSAIR
EK Memory
G.SKILL
CMX8GX3M2
A1333C9(XMP)
8GB (2x4GB)
4GB (2x2GB)
4GB (2x2GB)
4GB (2x2GB)
DS
DS
DS
DS
-
-
9-9-9-24
9-9-9-24
9
1.5
1.5
-
•
•
•
•
•
•
•
•
•
TW3X4G133
3C9A
-
-
EKM324L28B
P8-I13
-
-
•
•
F3-
10600CL9D-
4GBNT
G.SKILL
D3 128M8CE9 2GB
9-9-9-24
1.5
G.SKILL
F3-
10666CL9D-
8GBRL
8GB (2x4GB)
DS
-
-
9-9-9-24
1.5
•
•
•
(continued on the next page)
1-20
Chapter 1: Product introduction
DDR3 1333 MHz capability
Vendors
Part No.
Size
SS/
DS
Chip Brand Chip NO.
Timing
Voltage DIMM socket
support (Optional)
1
2
4
G.SKILL
G.SKILL
GEIL
F3-10666CL9D-
8GBRL
8GB (2x4GB)
8GB (2x4GB)
DS
DS
DS
DS
DS
DS
DS
DS
DS
DS
SS
DS
DS
SS
SS
SS
DS
DS
DS
DS
DS
DS
SS
DS
-
-
-
9-9-9-24
1.5
1.5
1.5
1.5
1.3
1.3
1.5
1.5
-
•
•
•
F3-10666CL9D-
8GBXL
-
9-9-9-24
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
GB34GB1333C7DC 4GB (2x2GB)
GEIL
GL1L128M8
8BA15FW
7-7-7-24
GEIL
GET316GB1333
C9QC
16GB (4x4GB)
4GB (2x2GB)
4GB (2x2GB)
4GB (2x2GB)
8GB (2x4GB)
2GB
-
-
9-9-9-24
GEIL
GG34GB1333C
9DC
GEIL
GL1L128M8
8BA115FW
9-9-9-24
GEIL
GG34GB1333C
9DC
GEIL
GL1L128M
88BA15B
9-9-9-24
GEIL
GVP34GB1333
C9DC
-
-
9-9-9-24
GEIL
GVP38GB1333
C9DC
-
-
9-9-9-24
GoodRam
Hynix
GR1333D364L9/
2G
Qimonda
Hynix
IDSH1G-03A
1F1C-13H
-
HMT125U6TFR8A- 2GB
H9
H5TC1G83T
FR
-
-
INNODISK
INNODISK
KINGMAX
KINGMAX
KINGMAX
KINGMAX
KINGMAX
KINGMAX
KINGMAX
KINGSTON
KINGSTON
KINGSTON
KINGSTON
KINGTIGER
M3UN-2GHJB C09
M3UN-4GHJA C09
FLFE85F-B8KL9
FLFE85F-C8KL9
FLFE85F-C8KL9
FLFE85F-C8KM9
FLFF65F-C8KL9
FLFF65F-C8KL9
FLFF65F-C8KM9
2GB
4GB
2GB
2GB
2GB
2GB
4GB
4GB
4GB
4GB
4GB
8GB
4GB
2GB
Hynix
H5TQ2G83C
FRH9C
9-9-9-24
-
Hynix
H5TQ2G83C
FRH9C
9-9-9-24
-
KINGMAX
KINGMAX
KINGMAX
Kingmax
KINGMAX
KINGMAX
Kingmax
Elpida
ELPIDA
ELPIDA
ELPIDA
KFB8FNLXL-
BNF-15A
-
-
KFC8FNLBF-
GXX-12A
-
-
KFC8FNLXF-
DXX-15A
-
-
KFC8FNMXF-
BXX-15A
-
-
KFC8FNLBF-
GXX-12A
-
-
KFC8FNLXF-
DXX-15A
-
-
KFC8FNMXF-
BXX-15A
-
-
KVR1333D3
E9S/4G
J2108ECSE-
DJ-F
9
1.5
1.5
1.5
1.5
-
KVR1333D3
N9H/4G
J2108BDBG-
GN-F
-
KVR1333D3N
9H/8G
J4208EASE-
DJ-F
9-9-9-24
KVR13N9S8H/4
J4208BBBG-
GN-F
-
-
F10DA2T1680
KINGTIGER KTG1333P
S1208NST-
C9
KINGTIGER
Mach Xtreme
Mach Xtreme
KTG2G1333 PG3
2GB
DS
DS
SS
-
-
-
-
-
-
-
-
-
-
•
•
•
•
•
•
•
•
•
MXD3U1333 16GQ 16GB (4x4GB)
MXD3V1333 2GS
2GB
Mach
Xtreme
C2S46D30-
D313
MICRON
MT8JTF25664AZ-
1G4M1
2GB
SS
MICRON
D9PFJ
-
-
•
•
•
(continued on the next page)
1-21
ASUS Z87-PRO
DDR3 1333 MHz capability
Vendors
Part No.
Size
SS/
DS
Chip
Brand
Chip NO.
Timing
Voltage DIMM socket
support (Optional)
1
2
4
OCZ
OCZ3G1333L
V4GK
4GB (2x2GB)
8GB (2x4GB)
8GB (2x4GB)
DS
DS
DS
DS
DS
DS
DS
-
-
-
-
-
-
-
-
-
-
-
-
-
-
9-9-9
9-9-9
9-9-9
9-9-9
-
1.65
1.65
1.65
1.65
1.5
•
•
OCZ
OCZ3G1333L
V8GK
•
•
•
•
•
•
•
•
•
•
•
•
OCZ
OCZ3G1333L
V8GK
OCZ
OCZ3RPR1333 8GB (2x4GB)
C9LV8GK
Patriot
Patriot
Patriot
PG38G1333EL
(XMP)
8GB
•
•
•
PGD316G1333 16GB (2x8GB)
ELK(XMP)
9-9-9-24
7-7-7-20
1.5
PGS34G1333L
LKA
4GB (2x2GB)
1.7
Patriot
PSD32G13332
2GB
2GB
DS
DS
Prtriot
PM128M8D3BU-15
9
9
-
-
•
•
•
•
•
•
RiDATA
C304627CB1A
G22Fe
RiDATA
C304627CB1AG22Fe
RiDATA
E304459CB1A
G32Cf
4GB
DS
DS
SS
SS
DS
SS
DS
DS
DS
DS
RiDATA
E304459CB1AG32Cf
9
-
-
-
-
-
-
-
-
-
-
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
SAMSUNG
M378B5273CH 4GB
0-CH9
SAMSUNG K4B2G0846C
-
Silicon
Power
SP001GBLTE
133S01
1GB
NANYA
NT5CB128M8AN-CG
-
Silicon
Power
SP001GBLTU1 1GB
33S02
S-POWER
NANYA
10YT3E5
9
Silicon
Power
SP002GBLTE1
33S01
2GB
NT5CB128M8AN-CG
20YT3NG
-
Silicon
Power
SP002GBLTU1 2GB
33V02
S-POWER
S-POWER
Team
9-9-9-24
Silicon
Power
SP004GBLTU1 4GB
33V02
20YT3NG
9-9-9-24
Team
TED34096M1
333HC9
4GB
8GB
8GB
T3D2568LT-13
TK963EBF3
D9QBJ
-
-
-
Transcend
Transcend
JM1333KLH-8
G(623654)
Transcend
MICRON
TS1GLK64V3
H(620053)
Side(s): SS - Single-sided DS - Double-sided DIMM support:
(1) Supports one (1) module inserted into any slot as Single-channel memory
configuration. We suggest that you install the module into A2 slot.
(2) Supports two (2) modules inserted into either the yellow slots or the dark brown slots
as one pair of Dual-channel memory configuration. We suggest that you install the
modules into slots A2 and B2 for better compatibility.
(4) Supports four (4) modules inserted into both the yellow slots and dark brown slots as
two pairs of Dual-channel memory configuration.
•
•
ASUS exclusively provides hyper DIMM support function.
Hyper DIMM support is subject to the physical characteristics of individual CPUs. Load
the X.M.P. or D.O.C.P. settings in the BIOS for the hyper DIMM support.
•
Visit the ASUS website for the latest QVL.
1-22
Chapter 1: Product introduction
1.2.5
Expansion slots
Unplug the power cord before adding or removing expansion cards. Failure to do so may
cause you physical injury and damage motherboard components.
Slot No. Slot Description
1
2
3
4
5
6
7
PCIe 2.0 x1_1 slot
PCIe 3.0/2.0 x16_1 slot
PCIe 2.0 x1_2 slot
PCIe 2.0 x1_3 slot
PCIe 3.0/2.0 x16_2 slot
PCIe 2.0 x1_4 slot
PCIe 2.0 x16_3 slot
1-23
ASUS Z87-PRO
PCIe Express 3.0 operating mode
VGA configuration
PCIe 3.0/2.0 x16_1
PCIe 3.0/2.0 x16_2
x16 (single VGA
recommended)
Single VGA/PCIe card
Dual VGA/PCIe card
N/A
x8
x8
•
We recommend that you provide sufficient power when running CrossFireX™ or SLI™
mode.
•
Connect a chassis fan to the motherboard connector labeled CHA_FAN1-4 when
using multiple graphics cards for better thermal environment.
IRQ assignments for this motherboard
A
B
C
D
E
F
G
H
PCIe x16_1
shared
–
–
–
–
–
–
–
PCIe x16_2
PCIe x16_3
PCIe x1_1
PCIe x1_2
PCIe x1_3
PCIe x1_4
SMBUS Controller
SATA #0
–
shared
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
shared
–
–
–
–
–
–
–
–
shared
–
–
–
shared
–
–
–
–
–
–
shared
–
–
–
–
–
–
shared
–
–
–
–
shared
–
–
–
–
–
shared
–
–
–
GbE Controller
EHCI #0
–
–
–
–
–
–
–
shared
–
–
–
–
–
–
–
–
–
shared
EHCI #1
shared
–
–
–
shared
–
–
–
–
XHCI Controller
BT4
–
–
shared
ASM1061 SATA6G
(AHCI)
–
–
shared
–
–
–
–
–
–
–
–
–
–
–
–
HD Audio
shared
1-24
Chapter 1: Product introduction
1.2.6
Onboard buttons and switches
Onboard switches and buttons allow you to fine-tune performance when working on a bare or
open-case system. This is ideal for overclockers and gamers who continually change settings
to enhance system performance.
1.
Power-on button
The motherboard comes with a power-on button that allows you to power up or wake
up the system. The button also lights up when the system is plugged to a power source
indicating that you should shut down the system and unplug the power cable before
removing or installing any motherboard component.
1-25
ASUS Z87-PRO
2.
MemOK! button
Installing DIMMs that are not compatible with the motherboard may cause system
boot failure, and the DRAM_LED near the MemOK! switch lights continuously. Press
and hold the MemOK! button until the DRAM_LED starts blinking to begin automatic
memory compatibility tuning for successful boot.
•
•
Refer to section 1.2.8 Onboard LEDs for the exact location of the DRAM_LED.
The DRAM_LED also lights up when the DIMM is not properly installed. Turn off the
system and reinstall the DIMM before using the MemOK! function.
•
•
The MemOK! switch does not function under Windows® OS environment.
During the tuning process, the system loads and tests failsafe memory settings. It
takes about 30 seconds for the system to test one set of failsafe settings. If the test
fails, the system reboots and test the next set of failsafe settings. The blinking speed
of the DRAM_LED increases, indicating different test processes.
•
Due to memory tuning requirement, the system automatically reboots when each
timing set is tested. If the installed DIMMs still fail to boot after the whole tuning
process, the DRAM_LED lights continuously. Replace the DIMMs with ones
recommended in the Memory QVL (Qualified Vendors Lists) in this user manual or on
the ASUS website at www.asus.com.
•
•
•
If you turn off the computer and replace DIMMs during the tuning process, the system
continues memory tuning after turning on the computer. To stop memory tuning, turn
off the computer and unplug the power cord for about 5–10 seconds.
If your system fails to boot up due to BIOS overclocking, press the MemOK! switch
to boot and load the BIOS default settings. A message will appear during POST
reminding you that the BIOS has been restored to its default settings.
We recommend that you download and update to the latest BIOS version from the
ASUS website at www.asus.com after using the MemOK! function.
1-26
Chapter 1: Product introduction
3.
DirectKey button
This feature allows your system to go to the BIOS Setup program with the press of
a button. With DirectKey, you can enter the BIOS anytime without having to press
the <Del> key during POST. It also allows you to turn on or turn off your system and
conveniently enter the BIOS during boot-up.
Ensure to save your data before using the DirectKey button.
•
When the system is on and you press the DirectKey button, your system will shut
down. Press the DirectKey button again or the Power-on button to reboot and enter
the BIOS directly.
•
•
Turn off your system using the power-on button to allow your system to go through
POST (without entering the BIOS) when you reboot your system.
Refer to section 3.8 Boot Menu for details about setting the DirectKey default
function.
1-27
ASUS Z87-PRO
4.
TPU switch
With its two-level adjustment functions, the TPU allows you to automatically adjusts the
CPU ratio and clock speed for an optimal system performance.
•
•
Enable this switch when the system is powered off.
When the TPU switch is set to Enabled (TPU_I: CPU Ratio Boost), the system
automatically adjusts the CPU ratio for an enhanced performance.
•
When the TPU switch is set to Enabled (TPU_II: CPU BCLK and Ratio Boost), the
system automatically adjusts the base clock rate (BLCK) and the CPU ratio for
enhanced performance.
•
•
•
The TPU LED (TPU_LED) near the TPU switch lights up when the TPU switch is
enabled. Refer to section 1.2.8 Onboard LEDs for the exact location of the TPU LED.
If you enable this switch under Windows® OS environment, the TPU function will be
activated after the next system bootup.
You may use the 4-Way Optimization and TPU feature in the AI Suite 3 application,
adjust the BIOS setup program or enable the TPU switch at the same time. However,
the system will use the last setting you have made.
1-28
Chapter 1: Product introduction
5.
EPU switch
Enable this switch to automatically detect the current PC loadings and intelligently
moderate the power consumption.
Enable this switch when the system is powered off.
•
•
•
The EPU LED (OLED2) near the EPU switch lights up when the EPU switch is
enabled. Refer to section 1.2.8 Onboard LEDs for the exact location of the EPU LED.
If you enable this switch under Windows® OS environment, the EPU function will be
activated after the next system bootup.
You may change the EPU settings in the software application or BIOS setup program
and enable the EPU function at the same time. However, the system will use the last
setting you have made.
1-29
ASUS Z87-PRO
1.2.7
Jumper
Clear RTC RAM (3-pin CLRTC)
This jumper allows you to clear the Real Time Clock (RTC) RAM in CMOS. You can clear the
CMOS memory of date, time, and system setup parameters by erasing the CMOS RTC RAM
data. The onboard button cell battery powers the RAM data in CMOS, which include system
setup information such as system passwords.
To erase the RTC RAM:
1.
2.
Turn OFF the computer and unplug the power cord.
Move the jumper cap from pins 1-2 (default) to pins 2-3. Keep the cap on pins 2-3 for
about 5-10 seconds, then move the cap back to pins 1-2.
3.
4.
Plug the power cord and turn ON the computer.
Hold down the <Del> key during the boot process and enter BIOS setup to re-enter
data.
Except when clearing the RTC RAM, never remove the cap on CLRTC jumper default
position. Removing the cap will cause system boot failure!
•
•
If the steps above do not help, remove the onboard battery and move the jumper
again to clear the CMOS RTC RAM data. After the CMOS clearance, reinstall the
battery.
You do not need to clear the RTC when the system hangs due to overclocking. For
system failure due to overclocking, use the C.P.R. (CPU Parameter Recall) feature.
Shut down and reboot the system so the BIOS can automatically reset parameter
settings to default values.
•
Due to the chipset behavior, AC power off is required to enable C.P.R. function. You
must turn off and on the power supply or unplug and plug the power cord before
rebooting the system.
1-30
Chapter 1: Product introduction
1.2.8
Onboard LEDs
1.
POST State LEDs
The POST State LEDs provide the status of these key components during POST
(Power-On-Self Test): CPU, memory modules, VGA card, and hard disk drive.s If an
error is found, the critical component’s LED stays lit up until the problem is solved.
2.
TPU LED
The TPU LED lights up when the TPU switch is enabled.
1-31
ASUS Z87-PRO
3.
EPU LED
The EPU LED lights up when the EPU switch is enabled.
4.
Q-Code LED
The Q-Code LED design provides you with a 2-digi error code that displays the system
status. Refer to the Q-Code table on the next page for details.
1-32
Chapter 1: Product introduction
Q-Code table
Code
00
Description
Not used
01
Power on. Reset type detection (soft/hard).
AP initialization before microcode loading
System Agent initialization before microcode loading
PCH initialization before microcode loading
Microcode loading
02
03
04
06
07
AP initialization after microcode loading
System Agent initialization after microcode loading
PCH initialization after microcode loading
Cache initialization
08
09
0B
0C – 0D
0E
Reserved for future AMI SEC error codes
Microcode not found
0F
Microcode not loaded
10
PEI Core is started
11 – 14
15 – 18
19 – 1C
2B – 2F
30
Pre-memory CPU initialization is started
Pre-memory System Agent initialization is started
Pre-memory PCH initialization is started
Memory initialization
Reserved for ASL (see ASL Status Codes section below)
Memory Installed
31
32 – 36
37 – 3A
3B – 3E
4F
CPU post-memory initialization
Post-Memory System Agent initialization is started
Post-Memory PCH initialization is started
DXE IPL is started
Memory initialization error. Invalid memory type or incompatible memory
speed
50 – 53
54
55
56
57
58
59
Unspecified memory initialization error
Memory not installed
Invalid CPU type or Speed
CPU mismatch
CPU self test failed or possible CPU cache error
CPU micro-code is not found or micro-code update is failed
(continued on the next page)
1-33
ASUS Z87-PRO
Code
5A
Description
Internal CPU error
5B
Reset PPI is not available
5C – 5F
E0
Reserved for future AMI error codes
S3 Resume is stared (S3 Resume PPI is called by the DXE IPL)
S3 Boot Script execution
E1
E2
Video repost
E3
OS S3 wake vector call
E4 – E7
E8
Reserved for future AMI progress codes
S3 Resume Failed
E9
S3 Resume PPI not Found
EA
S3 Resume Boot Script Error
EB
S3 OS Wake Error
EC – EF
F0
Reserved for future AMI error codes
Recovery condition triggered by firmware (Auto recovery)
Recovery condition triggered by user (Forced recovery)
Recovery process started
F1
F2
F3
Recovery firmware image is found
Recovery firmware image is loaded
Reserved for future AMI progress codes
Recovery PPI is not available
F4
F5 – F7
F8
F9
Recovery capsule is not found
Invalid recovery capsule
FA
FB – FF
60
Reserved for future AMI error codes
DXE Core is started
61
NVRAM initialization
62
Installation of the PCH Runtime Services
CPU DX� initialization is started
PCI host bridge initialization
63 – 67
68
69
System Agent DX� initialization is started
System Agent DX� SMM initialization is started
System Agent DX� initialization (System Agent module specific)
6A
6B – 6F
(continued on the next page)
1-34
Chapter 1: Product introduction
Code
70
Description
PCH DX� initialization is started
PCH DX� SMM initialization is started
PCH devices initialization
PCH DX� Initialization (PCH module specific)
ACPI module initialization
CSM initialization
71
72
73 – 77
78
79
7A – 7F
90
Reserved for future AMI DXE codes
Boot Device Selection (BDS) phase is started
Driver connecting is started
PCI Bus initialization is started
PCI Bus Hot Plug Controller Initialization
PCI Bus Enumeration
91
92
93
94
95
PCI Bus Request Resources
PCI Bus Assign Resources
Console Output devices connect
Console input devices connect
Super IO Initialization
96
97
98
99
9A
USB initialization is started
USB Reset
9B
9C
USB Detect
9D
USB Enable
9E – 9F
A0
Reserved for future AMI codes
ID� initialization is started
IDE Reset
A1
A2
IDE Detect
A3
IDE Enable
A4
SCSI initialization is started
SCSI Reset
A5
A6
SCSI Detect
A7
SCSI Enable
A8
Setup Verifying Password
(continued on the next page)
1-35
ASUS Z87-PRO
Code
A9
Description
Start of Setup
AA
AB
AC
AD
AE
AF
B0
Reserved for ASL (see ASL Status Codes section below)
Setup Input Wait
Reserved for ASL (see ASL Status Codes section below)
Ready To Boot event
Legacy Boot event
Exit Boot Services event
Runtime Set Virtual Address MAP Begin
Runtime Set Virtual Address MAP End
Legacy Option ROM Initialization
System Reset
B1
B2
B3
B4
USB hot plug
B5
PCI bus hot plug
B6
Clean-up of NVRAM
B7
Configuration Reset (reset of NVRAM settings)
Reserved for future AMI codes
CPU initialization error
B8– BF
D0
D1
System Agent initialization error
PCH initialization error
D2
D3
Some of the Architectural Protocols are not available
PCI resource allocation error. Out of Resources
No Space for Legacy Option ROM
No Console Output Devices are found
No Console Input Devices are found
Invalid password
D4
D5
D6
D7
D8
D9
Error loading Boot Option (LoadImage returned error)
Boot Option is failed (StartImage returned error)
Flash update is failed
DA
DB
DC
Reset protocol is not available
1-36
Chapter 1: Product introduction
ACPI/ASL Checkpoints
Code
01
Description
System is entering S1 sleep state
02
System is entering S2 sleep state
03
System is entering S3 sleep state
04
System is entering S4 sleep state
05
System is entering S5 sleep state
10
System is waking up from the S1 sleep state
System is waking up from the S2 sleep state
System is waking up from the S3 sleep state
System is waking up from the S4 sleep state
System has transitioned into ACPI mode. Interrupt controller is in PIC mode.
System has transitioned into ACPI mode. Interrupt controller is in APIC mode.
20
30
40
AC
AA
1-37
ASUS Z87-PRO
1.2.9
1.
Internal connectors
Intel® Z87 Serial ATA 6.0 Gb/s connectors (7-pin SATA6G_1-6 [yellow])
These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA 6.0
Gb/s signal cables.
If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, 5, and 10
configuration with the Intel® Rapid Storage Technology through the onboard Intel® Z87
chipset.
•
•
These connectors are set to [AHCI Mode] by default. If you intend to create a Serial
ATA RAID set using these connectors, set the SATA Mode item in the BIOS to [RAID
Mode]. Refer to section 3.6.3 SATA Configuration for details.
Before creating a RAID set, refer to section 5.1 RAID configurations or the manual
bundled in the motherboard support DVD.
1-38
Chapter 1: Product introduction
2.
ASMedia® Serial ATA 6.0 Gb/s connectors (7-pin SATA6G_E12 [dark brown])
These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA 6.0
Gb/s signal cables.
•
•
ASMedia storage controller can only support AHCI mode.
These SATA ports are for data drives only.
3.
Digital audio connector (4-1 pin SPDIF_OUT)
This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port. Connect
the S/PDIF Out module cable to this connector, then install the module to a slot
opening at the back of the system chassis.
The S/PDIF module is purchased separately.
1-39
ASUS Z87-PRO
4.
USB 3.0 connector (20-1 pin USB3_12)
This connector allows you to connect a USB 3.0 module for additional USB 3.0 front
or rear panel ports. With an installed USB 3.0 module, you can enjoy all the benefits of
USB 3.0 including faster data transfer speeds of up to 5Gbps, faster charging time for
USB-chargeable devices, optimized power efficiency, and backward compatibility with
USB 2.0.
•
The USB 3.0 module is purchased separately.
•
These connectors are based on xHCI specification. We recommend you to install the
related driver to fully use the USB 3.0 ports under Windows® 7.
•
The plugged USB 3.0 device may run on xHCI or EHCI mode depending on the
operating system’s setting.
1-40
Chapter 1: Product introduction
5.
USB 2.0 connectors (10-1 pin USB78; USB910; USB1112; USB1314)
These connectors are for USB 2.0 ports. Connect the USB module cable to any of
these connectors, then install the module to a slot opening at the back of the system
chassis. These USB connectors comply with USB 2.0 specification that supports up to
48 MBps connection speed.
DO NOT connect a 1394 cable to the USB connectors. Doing so will damage the
motherboard!
You can connect the front panel USB cable to the ASUS Q-Connector (USB, dark brown)
first, and then install the Q-Connector (USB) to the USB connector onboard if your chassis
supports front panel USB ports.
•
The USB 2.0 module is purchased separately.
•
These connectors are based on xHCI specification. We recommend you to install the
related driver to fully use the USB 2.0 ports under Windows® 7.
•
The plugged USB 2.0 device may run on xHCI or EHCI mode depending on the
operating system’s setting.
1-41
ASUS Z87-PRO
6.
CPU, chassis, and optional fan connectors
(4-pin CPU_FAN; 4-pin CPU_OPT; 4-pin CHA_FAN1-4)
Connect the fan cables to the fan connectors on the motherboard, ensuring that the
black wire of each cable matches the ground pin of the connector.
•
DO NOT forget to connect the fan cables to the fan connectors. Insufficient air flow
inside the system may damage the motherboard components. These are not jumpers!
Do not place jumper caps on the fan connectors!
•
Ensure that the CPU fan is securely installed to the CPU fan connector.
•
•
The CPU_FAN connector supports the CPU fan of maximum 1A (12 W) fan power.
The CPU_FAN connector and CHA_FAN connectors support the ASUS FAN Xpert 2
feature.
1-42
Chapter 1: Product introduction
7.
Front panel audio connector (10-1 pin AAFP)
This connector is for a chassis-mounted front panel audio I/O module that supports
either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel
audio I/O module cable to this connector.
•
•
We recommend that you connect a high-definition front panel audio module to this
connector to avail of the motherboard’s high-definition audio capability.
If you want to connect a high-definition or an AC’97 front panel audio module to this
connector, set the Front Panel Type item in the BIOS setup to [HD] or [AC97].
1-43
ASUS Z87-PRO
8.
ATX power connectors (24-pin EATXPWR; 8-pin EATX12V)
These connectors are for ATX power supply plugs. The power supply plugs are
designed to fit these connectors in only one orientation. Find the proper orientation and
push down firmly until the connectors completely fit.
•
For a fully configured system, we recommend that you use a power supply unit
(PSU) that complies with ATX 12 V Specification 2.0 (or later version) and provides a
minimum power of 350 W.
•
DO NOT forget to connect the 4-pin/8-pin EATX12 V power plug. Otherwise, the
system will not boot.
•
We recommend that you use a PSU with a higher power output when configuring a
system with more power-consuming devices. The system may become unstable or
may not boot up if the power is inadequate.
•
•
If you want to use two or more high-end PCI Express x16 cards, use a PSU with
1000W power or above to ensure the system stability.
If you are uncertain about the minimum power supply requirement for your system,
refer to the Recommended Power Supply Wattage Calculator at http://support.asus.
com/PowerSupplyCalculator/PSCalculator.aspx?SLanguage=en-us for details.
1-44
Chapter 1: Product introduction
9.
System panel connector (20-8 pin PANEL)
This connector supports several chassis-mounted functions.
•
•
System power LED (2-pin PLED)
This 2-pin connector is for the system power LED. Connect the chassis power LED
cable to this connector. The system power LED lights up when you turn on the system
power, and blinks when the system is in sleep mode.
Hard disk drive activity LED (2-pin HDD_LED)
This 2-pin connector is for the HDD Activity LED. Connect the HDD Activity LED cable
to this connector. The HDD L�D lights up or flashes when data is read from or written
to the HDD.
•
•
System warning speaker (4-pin SPEAKER)
This 4-pin connector is for the chassis-mounted system warning speaker. The speaker
allows you to hear system beeps and warnings.
ATX power button/soft-off button (2-pin PWRSW)
This connector is for the system power button. Pressing the power button turns the
system on or puts the system in sleep or soft-off mode depending on the operating
system settings. Pressing the power switch for more than four seconds while the
system is ON turns the system OFF.
•
Reset button (2-pin RESET)
This 2-pin connector is for the chassis-mounted reset button for system reboot without
turning off the system power.
1-45
ASUS Z87-PRO
10. TPM connector (20-1 pin TPM)
This connector supports a Trusted Platform Module (TPM) system, which securely
store keys, digital certificates, passwords and data. A TPM system also helps enhance
network security, protect digital identities, and ensures platform integrity.
11. Direct Connector (2-pin DRCT)
This connector is for the chassis-mounted button that supports the DirectKey function.
Connect the button cable that supports DirectKey, from the chassis to this connector on
the motherboard.
Ensure that your chassis comes with the extra button cable that supports the DirectKey
feature. Refer to the technical documentation that came with the chassis for details.
1-46
Chapter 1: Product introduction
Chapter 2:
Basic installation
Basic installation
2
2.1
Building your PC system
2.1.1
Motherboard installation
The diagrams in this section are for reference only. The motherboard layout may vary with
models, but the installation steps are the same for all models.
1.
Install the ASUS I/O Shield to the chassis rear I/O panel.
2.
Place the motherboard into the chassis, ensuring that its rear I/O ports are aligned to
the chassis’ rear I/O panel.
2-1
ASUS Z87-PRO
3.
Place nine screws into the holes indicated by circles to secure the motherboard to the
chassis.
DO NOT overtighten the screws! Doing so can damage the motherboard.
2-2
Chapter 2: Basic installation
To uninstall the CPU heatsink and fan assembly
2-5
ASUS Z87-PRO
2.1.9
Wi-Fi antenna installation
Installing the ASUS 2T2R dual band W-Fi antenna
Connect the bundled ASUS 2T2R dual band Wi-Fi antenna connector to the Wi-Fi ports at
the back of the chassis.
KY
IN
LNIE
CRT
BSA
S
FRONT
ERA
UBS3.0
SP/DIF
UBIOSFlshback
U
MCIN
PWOEReSTA6G
IO Shield
•
•
Ensure that the ASUS 2T2R dual band Wi-Fi antenna is securely installed to the Wi-Fi
ports.
Ensure to install the Wi-Fi driver before installing the Wi-Fi GO! software.
2-11
ASUS Z87-PRO
2.2
BIOS update utility
USB BIOS Flashback
USB BIOS Flashback allows you to easily update the BIOS without entering the existing
BIOS or operating system. Simply insert a USB storage device to the USB port, press the
USB BIOS Flashback button for three seconds, and the BIOS is updated automatically.
To use USB BIOS Flashback:
1.
Place the bundled support DVD to the optical drive and install the USB BIOS
Flashback Wizard. Follow the onscreen instructions to complete the installation.
2.
Insert the USB storage device to the USB Flashback port.
We recommend you to use a USB 2.0 storage device to save the latest BIOS version for
better compatibility and stability.
3.
4.
5.
Launch the USB BIOS Flashback Wizard to automatically download the latest BIOS
version.
Press the BIOS Flashback button for three seconds until a flashing light appears, which
indicates that the BIOS Flashback function is enabled.
Wait until the light goes out, indicating that the BIOS updating process is completed.
2-12
Chapter 2: Basic installation
For more BIOS update utilities in BIOS setup, refer to the section 3.11 Updating BIOS in
Chapter 3.
1. Do not disconnect the USB flash drive or power system, or move the CLRTC jumper
during the BIOS updating process. Doing so will interrupt the BIOS updating process.
In case of interruption, follow the steps again to update the BIOS.
2. If FLBK_L�D flashes for five seconds and turns into a stable light, this indicates
that USB BIOS Flashback is not working properly due to improper USB flash drive
connection, BIOS file name error, or incompatible BIOS file format. If this happens,
restart the syetem.
3. BIOS updating poses some risks. If the BIOS program is damaged during the updating
process and the system fails to reboot, please contact your local ASUS Service Center
for assistance
2-13
ASUS Z87-PRO
2.3
Motherboard rear and audio connections
Rear I/O connection
2.3.1
Rear panel connectors
1. PS/2 keyboard/mouse combo port
7.
8.
9.
ASmedia® USB 3.0 ports, support ASUS
USB 3.0 Boost.
2. Wi-Fi 802.11 a/b/g/n
Bluetooth V4.0/3.0 + HS*
HDMI port
3. Optical S/PDIF Out port
4. VGA port
DisplayPort
10. DVI port
5. Intel® LAN (RJ-45) port**
11. Intel® USB 3.0 ports, support ASUS
USB 3.0 Boost. (Bottom port supports
USB BIOS Flashback and USB
Charger+)
6. ASMedia USB 3.0 ports support
ASUS USB 3.0 Boost
12. Audio I/O ports***
*, ** and ***: Refer to the tables on the next page for Bluetooth/Wi-Fi module LEDs, LAN port LEDs, and audio port
definitions.
2-14
Chapter 2: Basic installation
•
The plugged USB 3.0 device may run on xHCI or EHCI mode, depending on the
operating system’s setting.
•
•
USB 3.0 devices can only be used as data storage only.
We strongly recommend that you connect USB 3.0 devices to USB 3.0 ports for faster
and better performance for your USB 3.0 devices.
•
Due to the design of the Intel® 8 series chipset, all USB devices connected to the
USB 2.0 and USB 3.0 ports are controlled by the xHCI controller. Some legacy USB
devices must update their firmware for better compatibility.
•
•
Multi-VGA output supports up to three displays under Windows® OS environment, two
displays under BIOS, and one display under DOS.
Intel display architecture design supports the following maximum supported pixel
clocks (Pixel Clock = H total x V Total x Frame Rate (Screen refresh rate)):
-
-
DisplayPort: 533 MHz
DVI-D: 165 MHz
-
-
RGB: 180 MHz
HDMI port: 300 MHz
* Bluetooth and Wi-Fi module LED indications
Wi-Fi LED
Status
Off
Bluetooth LED
Description Status Description
No link
Linked
Off
No link
Bluetooth
LED
Wi-Fi
LED
Green
Blue
Linked
Blinking
Data activity
Wi-Fi 802.11 a/b/g/n, Bluetooth
v4.0/3.0 + HS
* The Bluetooth word mark and logos are owned by Bluetooth SIG, Inc. and any use of such mark by ASUSTeK
Computer Inc. is under license. Other trademarks and trade names are those of their respective owners.
** LAN ports LED indications
Activity Link LED
Speed LED
Status
Description
No link
Status Description
ACT/LINK
LED
SPEED
LED
Off
Off
10 Mbps connection
Orange
Linked
Orange 100 Mbps connection
Green 1 Gbps connection
Orange (Blinking)
Data activity
Orange (Blinking
then steady)
Ready to wake up
from S5 mode
LAN port
2-15
ASUS Z87-PRO
*** Audio 2, 4, 6, or 8-channel configuration
Port
Headset
4-channel
6-channel
8-channel
2-channel
Light Blue Line In
Line In
Line In
Line In
Lime
Line Out
Front Speaker Out Front Speaker Out
Front Speaker Out
Mic In
Pink
Mic In
Mic In
Mic In
Orange
Black
Gray
–
–
–
–
Center/Subwoofer
Rear Speaker Out
–
Center/Subwoofer
Rear Speaker Out
Side Speaker Out
Rear Speaker Out
–
2.3.2
Audio I/O connections
Audio I/O ports
Connect to Headphone and Mic
Connect to Stereo Speakers
2-16
Chapter 2: Basic installation
Connect to 2.1 channel Speakers
Connect to 4.1 channel Speakers
Connect to 5.1 channel Speakers
2-17
ASUS Z87-PRO
Connect to 7.1 channel Speakers
When the DTS UltraPC II function is enabled, ensure to connect the rear speaker to the
gray port.
2.4
1.
Starting up for the first time
After making all the connections, replace the system case cover.
Ensure that all switches are off.
2.
3.
Connect the power cord to the power connector at the back of the system chassis.
Connect the power cord to a power outlet that is equipped with a surge protector.
Turn on the devices in the following order:
4.
5.
a. Monitor
b. External SCSI devices (starting with the last device on the chain)
c. System power
6.
After applying power, the system power LED on the system front panel case lights up.
For systems with ATX power supplies, the system LED lights up when you press the
ATX power button. If your monitor complies with the “green” standards or if it has a
“power standby” feature, the monitor LED may light up or change from orange to green
after the system LED turns on.
The system then runs the power-on self tests (POST). While the tests are running, the
BIOS beeps (refer to the BIOS beep codes table) or additional messages appear on
the screen. If you do not see anything within 30 seconds from the time you turned on
the power, the system may have failed a power-on test. Check the jumper settings and
connections or call your retailer for assistance.
2-18
Chapter 2: Basic installation
BIOS Beep
Description
One short beep
VGA detected
Quick boot set to disabled
No keyboard detected
No memory detected
One continuous beep followed by two
short beeps then a pause (repeated)
One continuous beep followed by three
short beeps
No VGA detected
One continuous beep followed by four
short beeps
Hardware component failure
7.
At power on, hold down the <Delete> key to enter the BIOS Setup. Follow the
instructions in Chapter 3.
2.5
Turning off the computer
While the system is ON, press the power button for less than four seconds to put the system
on sleep mode or soft-off mode, depending on the BIOS setting. Press the power switch
for more than four seconds to let the system enter the soft-off mode regardless of the BIOS
setting.
2-19
ASUS Z87-PRO
2-20
Chapter 2: Basic installation
Chapter 3:
BIOS setup
BIOS setup
3
3.1
Knowing BIOS
The new ASUS U�FI BIOS is a Unified �xtensible Interface that complies with U�FI
architecture, offering a user-friendly interface that goes beyond the traditional keyboard-
only BIOS controls to enable a more flexible and convenient mouse input. You can easily
navigate the new UEFI BIOS with the same smoothness as your operating system. The
term “BIOS” in this user manual refers to “U�FI BIOS” unless otherwise specified.
BIOS (Basic Input and Output System) stores system hardware settings such as storage
device configuration, overclocking settings, advanced power management, and boot
device configuration that are needed for system startup in the motherboard CMOS. In
normal circumstances, the default BIOS settings apply to most conditions to ensure
optimal performance. DO NOT change the default BIOS settings except in the following
circumstances:
•
An error message appears on the screen during the system bootup and requests you to
run the BIOS Setup.
•
You have installed a new system component that requires further BIOS settings or
update.
Inappropriate BIOS settings may result to instability or boot failure. We strongly
recommend that you change the BIOS settings only with the help of a trained service
personnel.
When downloading or updating the BIOS file, rename it as Z87P.CAP for this motherboard.
3-1
ASUS Z87-PRO
3.2
BIOS setup program
Use the BIOS Setup to update the BIOS or configure its parameters. The BIOS screen
include navigation keys and brief onscreen help to guide you in using the BIOS Setup
program.
Entering BIOS at startup
To enter BIOS Setup at startup:
•
Press <Delete> during the Power-On Self Test (POST). If you do not press <Delete>,
POST continues with its routines.
Entering BIOS Setup after POST
To enter BIOS Setup after POST:
•
•
•
Press <Ctrl>+<Alt>+<Delete> simultaneously.
Press the reset button on the system chassis.
Press the power button to turn the system off then back on. Do this option only if you
failed to enter BIOS Setup using the first two options.
•
•
•
The BIOS setup screens shown in this section are for reference purposes only, and
may not exactly match what you see on your screen.
Ensure that a USB mouse is connected to your motherboard if you want to use the
mouse to control the BIOS setup program.
If the system becomes unstable after changing any BIOS setting, load the default
settings to ensure system compatibility and stability. Select the Load Optimized
Defaults item under the Exit menu or press hotkey <F5>. See section 3.9 Exit Menu
for details.
•
•
If the system fails to boot after changing any BIOS setting, try to clear the CMOS and
reset the motherboard to the default value. See section 1.2.7 Jumper for information
on how to erase the RTC RAM via the Clear CMOS jumper.
The BIOS setup program does not support the bluetooth devices.
BIOS menu screen
The BIOS Setup program can be used under two modes: EZ Mode and Advanced Mode.
You can change modes from the Exit menu or from the Exit/Advanced Mode screen.
3-2
Chapter 3: BIOS setup
3.2.1
EZ Mode
By default, the EZ Mode screen appears when you enter the BIOS setup program. The EZ
Mode provides you an overview of the basic system information, and allows you to select
the display language, system performance mode and boot device priority. To access the
Advanced Mode, click Exit/Advanced Mode, then select Advanced Mode or press <F7> hot
key for the advanced BIOS settings.
The default screen for entering the BIOS setup program can be changed. Refer to the
Setup Mode item in section 3.7 Boot menu for details.
Exits the BIOS setup program
Displays the CPU/motherboard
temperature, CPU/5V/3.3V/12V voltage
output, CPU/chassis/power fan speed
without saving the changes, saves
the changes and resets the system,
or enters the Advanced Mode
Selects the display language
of the BIOS setup program
Selects the boot
device priority
Loads optimized
default settings
Displays the selected
shortcut items
Displays the Advanced
mode menus
Displays the system properties of the
selected mode on the right hand side
Selects the boot
device priority
•
•
The boot device options vary depending on the devices you installed to the system.
The Boot Menu(F8) button is available only when the boot device is installed to the
system.
3-3
ASUS Z87-PRO
3.2.2
Advanced Mode
The Advanced Mode provides advanced options for experienced end-users to configure
the BIOS settings. The figure below shows an example of the Advanced Mode. Refer to the
following sections for the detailed configurations.
To access the Advanced Mode, click Exit, then select Advanced Mode or press F7 hotkey.
Menu bar
General help
Back button
Menu items
Submenu item
Configuration fields
Last modified
settings
Pop-up window
Navigation keys
Scroll bar
Quick note
Menu bar
The menu bar on top of the screen has the following main items:
My Favorites For saving the frequently-used system settings and configuration.
Main
For changing the basic system configuration
For changing the overclocking settings
For changing the advanced system settings
Ai Tweaker
Advanced
For displaying the system temperature, power status, and changing the
fan settings.
Monitor
Boot
Tool
Exit
For changing the system boot configuration
For configuring options for special functions
For selecting the exit options and loading default settings
3-4
Chapter 3: BIOS setup
Menu items
The highlighted item on the menu bar displays the specific items for that menu. For example,
selecting Main shows the Main menu items.
The other items (Ai Tweaker, Advanced, Monitor, Boot, Tool, and Exit) on the menu bar have
their respective menu items.
Back button
This button appears when entering a submenu. Press <Esc> or use the USB mouse to click
this button to return to the previous menu screen.
Submenu items
A greater than sign (>) before each item on any menu screen means that the item has a
submenu. To display the submenu, select the item and press <Enter>.
Pop-up window
Select a menu item and press <�nter> to display a pop-up window with the configuration
options for that item.
Scroll bar
A scroll bar appears on the right side of a menu screen when there are items that do not fit on
the screen. Press the Up/Down arrow keys or <Page Up> / <Page Down> keys to display the
other items on the screen.
Navigation keys
At the bottom right corner of the menu screen are the navigation keys for the BIOS setup
program. Use the navigation keys to select items in the menu and change the settings.
If you delete all shortcut items from the F3: Shortcut list, the default shortcut items will
reappear after your next startup.
General help
At the top right corner of the menu screen is a brief description of the selected item. Use
<F12> key to capture the BIOS screen and save it to the removable storage device.
Configuration fields
These fields show the values for the menu items. If an item is user-configurable, you can
change the value of the field opposite the item. You cannot select an item that is not
user-configurable.
A configurable field is highlighted when selected. To change the value of a field, select it and
press <Enter> to display a list of options.
Quick Note button
This button allows you to enter notes of the activities that you have done in BIOS.
•
•
The Quick Note function does not support the following keyboard functions: delete,
cut, copy and paste.
You can only use the alphanumeric characters to enter your notes.
3-5
ASUS Z87-PRO
Last Modified button
This button shows the items that you last modified and saved in BIOS Setup.
3.3
My Favorites
MyFavorites is your personal space where you can easily save and access your favorite
BIOS items.
Adding items to My Favorites
To add frequently-used BIOS items to My Favorites:
1.
Use the arrow keys to select an item that you want to add. When using a mouse, hover
the pointer to the item.
2.
Press <F4> on your keyboard or right-click on your mouse to add the item to My
Favorites page.
You cannot add the following items to My Favorites:
•
•
•
Items with submenu options
User-configurable items such as language and boot device order
Configuration items such as Memory SPD Information, system time and date
3-6
Chapter 3: BIOS setup
3.4
Main menu
The Main menu screen appears when you enter the Advanced Mode of the BIOS Setup
program. The Main menu provides you an overview of the basic system information, and
allows you to set the system date, time, language, and security settings.
Security
The Security menu items allow you to change the system security settings.
•
•
If you have forgotten your BIOS password, erase the CMOS Real Time Clock (RTC)
RAM to clear the BIOS password. See section 1.2.6 Onboard buttons and switches
for information on how to erase the RTC RAM via the Clear CMOS button.
The Administrator or User Password items on top of the screen show the default [Not
Installed]. After you set a password, these items show [Installed].
3-7
ASUS Z87-PRO
Administrator Password
If you have set an administrator password, we recommend that you enter the administrator
password for accessing the system. Otherwise, you might be able to see or change only
selected fields in the BIOS setup program.
To set an administrator password:
1.
2.
3.
Select the Administrator Password item and press <Enter>.
From the Create New Password box, key in a password, then press <Enter>.
Confirm the password when prompted.
To change an administrator password:
1.
2.
Select the Administrator Password item and press <Enter>.
From the Enter Current Password box, key in the current password, then press
<Enter>.
3.
From the Create New Password box, key in a new password, then press <Enter>.
4.
Confirm the password when prompted.
To clear the administrator password, follow the same steps as in changing an administrator
password, but press <�nter> when prompted to create/confirm the password. After you clear
the password, the Administrator Password item on top of the screen shows Not Installed.
User Password
If you have set a user password, you must enter the user password for accessing the system.
The User Password item on top of the screen shows the default Not Installed. After you set a
password, this item shows Installed.
To set a user password:
1.
2.
3.
Select the User Password item and press <Enter>.
From the Create New Password box, key in a password, then press <Enter>.
Confirm the password when prompted.
3-8
Chapter 3: BIOS setup
To change a user password:
1.
2.
Select the User Password item and press <Enter>.
From the Enter Current Password box, key in the current password, then press
<Enter>.
3.
From the Create New Password box, key in a new password, then press <Enter>.
4.
Confirm the password when prompted.
To clear the user password, follow the same steps as in changing a user password, but press
<�nter> when prompted to create/confirm the password. After you clear the password, the
User Password item on top of the screen shows Not Installed.
3.5
Ai Tweaker menu
The Ai Tweaker menu items allow you to configure overclocking-related items.
Be cautious when changing the settings of the Ai Tweaker menu items. Incorrect field
values can cause the system to malfunction.
The configuration options for this section vary depending on the CPU and DIMM model you
installed on the motherboard.
Scroll down to display other BIOS items.
3-9
ASUS Z87-PRO
Ai Overclock Tuner [Auto]
Allows you to select the CPU overclocking options to achieve the desired CPU internal
frequency. Select any of these preset overclocking configuration options:
[Auto]
Loads the optimal settings for the system.
[Manual]
[X.M.P.]
Allows you to automatically optimize the CPU ratio and BCLK frequency.
Allows your system to automatically optimize the CPU ratio, BCLK
frequency, and memory parameters. If you install memory modules
supporting the eXtreme Memory Profile (X.M.P.) Technology, select this
item to set the profiles supported by your memory modules for optimizing
the system performance.
The following item appears only when you set the Ai Overclocking Tuner to [Manual].
Filter PLL [Auto]
Allows you to select a BCLK (base clock) mode when running in a high or low BCLK.
Configuration options: [Auto] [Low BCLK Mode] [High BCLK Mode]
BCLK/PEG Frequency [100.0]
Allows you to set the BCLK/PEG frequency to enhance the system performance. Use
the <+> or <-> keys to adjust the value. The values range from 80.0MHz to 300.0MHz.
The following item appears only when you set the Ai Overclocking Tuner to [X.M.P.].
eXtreme Memory Profile
Allows you to select the X.M.P. mode supported by your memory module.
Configuration options: [Profile #1] [Profile #2]
ASUS MultiCore Enhancement [Enabled]
[Enabled]
Default set to [Enabled] for maximum performance under XMP/Manual/
User-defined memory frequency mode.
[Disabled]
Allows you to set to default core ratio settings.
CPU Core Ratio [Sync All Cores]
Allows you to set the CPU ratio and synchronize automatically either per core or all cores.
Configuration options: [Auto] [Sync All Cores] [Per Core]
When the CPU Core Ratio is set to [Per Core], the following item appears:
1-Core Ratio Limit [Auto]
Select [Auto] to apply the CPU default Turbo Ratio setting or manually
assign a 1-Core Limit value that must be higher than or equal to the 2-Core
Ratio Limit.
2-Core Ratio Limit [Auto]
Select [Auto] to apply the CPU default Turbo Ratio setting or manually
assign a 2-Core Limit value that must be higher than or equal to the 3-Core
Ratio Limit.
3-10
Chapter 3: BIOS setup
If you assign a value for 2-Core Ratio Limit, do not set the 1-Core Ratio Limit to [Auto].
3-Core Ratio Limit [Auto]
Select [Auto] to apply the CPU default Turbo Ratio setting or manually
assign a 3-Core Limit value that must be higher than or equal to the 4-Core
Ratio Limit.
If you assign a value for 3-Core Ratio Limit, do not set the 1-Core Ratio Limit and 2-Core
Ratio Limit to [Auto].
4-Core Ratio Limit [Auto]
Select [Auto] to apply the CPU default Turbo Ratio setting or manually
assign a 4-Core Limit value that must be higher than or equal to the 3-Core
Ratio Limit.
If you assign a value for 4-Core Ratio Limit, do not set the 1-Core Ratio Limit, 2-Core Ratio
Limit, and 3-Core Ratio to [Auto].
Min CPU Cache Ratio [Auto]
Allows you to set the minimum possible ratio on the Uncore part of the processor. Use the
<+> or <-> keys to adjust the value. The values depend on the CPU installed.
Max CPU Cache Ratio [Auto]
Allows you to set the maximum possible ratio on the Uncore part of the processor. Use the
<+> or <-> keys to adjust the value. The values depend on the CPU installed.
Internal PLL Overvoltage [Auto]
Allows you to enable the internal PLL Overvoltage for K-SKU CPUs to get the extreme
overclocking capability.
Configuration options: [Auto] [�nabled] [Disabled]
CPU bus speed : DRAM speed ratio mode [Auto]
Allows you to set the CPU bus speed to DRAM speed ratio mode.
[Auto]
DRAM speed is set to the optimized settings.
[100:133]
[100:100]
The CPU bus speed to DRAM speed ratio is set to 100:133.
The CPU bus speed to DRAM speed ratio is set to 100:100.
Memory Frequency [Auto]
Allows you to set the memory operating frequency. The configuration options vary with the
BCLK/PCIE Frequency item settings.
CPU Graphics Max. Ratio [Auto]
[Auto]
Allows you to automatically optimize the CPU Graphics Ratio depending on
the system loading.
[Manual]
Allows you to set a value for an optimal CPU Grapics Ratio. Use the <+> or
<-> keys to adjust the CPU graphics ratio. The minimum value depends on
the installed CPU.
3-11
ASUS Z87-PRO
OC Tuner [As Is]
OC Tuner automatically overclocks the frequency and voltage of CPU and DRAM for
enhancing the system performance and accelerates the iGPU performance to the extreme
according to the integrated graphics loading.
Configuration options: [As Is] [Ratio First] [BCLK First]
EPU Power Saving Mode [Disabled]
Allows you to enable or disable the EPU power saving function.
Configuration options: [Disabled] [�nabled]
DRAM Timing Control
The subitems in this menu allow you to set the DRAM timing control features. Use the <+> or
<-> keys to adjust the value. To restore the default setting, type [auto] using the keyboard and
press the <Enter> key.
Changing the values in this menu may cause the system to become unstable! If this
happens, revert to the default settings.
Primary Timings
DRAM CAS# Latency [Auto]
Configuration options: [Auto] [1] – [31]
DRAM RAS# to CAS# Delay [Auto]
Configuration options: [Auto] [1] – [31]
DRAM RAS# PRE Time [Auto]
Configuration options: [Auto] [1] – [31]
DRAM RAS# ACT Time [Auto]
Configuration options: [Auto] [1] – [63]
DRAM COMMAND Mode [Auto]
Configuration options: [Auto] [1] – [3]
Secondary Timings
DRAM RAS# to RAS# Delay [Auto]
Configuration options: [Auto] [1] – [15]
DRAM REF Cycle Time [Auto]
Configuration options: [Auto] [1] – [511]
DRAM Refresh Interval [Auto]
Configuration options: [Auto] [1] – [65535]
DRAM WRITE Recovery Time [Auto]
Configuration options: [Auto] [1] – [16]
DRAM READ to PRE Time [Auto]
Configuration options: [Auto] [1] – [15]
3-12
Chapter 3: BIOS setup
DRAM FOUR ACT WIN Time [Auto]
Configuration options: [Auto] [1] – [255]
DRAM WRITE to READ Delay [Auto]
Configuration options: [Auto] [1] – [15]
DRAM CKE Minimum pulse width [Auto]
Configuration options: [Auto] [1] – [15]
DRAM CAS# Write Latency [Auto]
Configuration options: [Auto] [1] – [31]
RTL IOL control
DRAM RTL (CHA_R0D0) [Auto]
Configuration options: [Auto] [1] - [63]
DRAM RTL (CHA_R0D1) [Auto]
Configuration options: [Auto] [1] - [63]
DRAM RTL (CHA_R1D0) [Auto]
Configuration options: [Auto] [1] - [63]
DRAM RTL (CHA_R1D1) [Auto]
Configuration options: [Auto] [1] - [63]
DRAM RTL (CHB_R0D0) [Auto]
Configuration options: [Auto] [1] - [63]
DRAM RTL (CHB_R0D1) [Auto]
Configuration options: [Auto] [1] - [63]
DRAM RTL (CHB_R1D0) [Auto]
Configuration options: [Auto] [1] - [63]
DRAM RTL (CHB_R1D1) [Auto]
Configuration options: [Auto] [1] - [63]
DRAM IO-L (CHA_R0D0) [Auto]
Configuration options: [Auto] [1] - [15]
DRAM IO-L (CHA_R0D1) [Auto]
Configuration options: [Auto] [1] - [15]
DRAM IO-L (CHA_R1D0 [Auto]
Configuration options: [Auto] [1] - [15]
DRAM IO-L (CHA_R1D1 [Auto]
Configuration options: [Auto] [1] - [15]
DRAM IO-L (CHB_R0D0 [Auto]
Configuration options: [Auto] [1] - [15]
3-13
ASUS Z87-PRO
DRAM IO-L (CHB_R0D1) [Auto]
Configuration options: [Auto] [1] - [15]
DRAM IO-L (CHB_R1D0 [Auto]
Configuration options: [Auto] [1] - [15]
DRAM IO-L (CHB_R1D1 [Auto]
Configuration options: [Auto] [1] - [15]
Third Timings
tRDRD [Auto]
Configuration options: [Auto] [1] – [7]
tRDRD_dr [Auto]
Configuration options: [Auto] [1] – [15]
tRDRD_dd [Auto]
Configuration options: [Auto] [1] – [15]
tWRRD [Auto]
Configuration options: [Auto] [1] – [63]
tWRRD_dr [Auto]
Configuration options: [Auto] [1] – [15]
tWRRD_dd [Auto]
Configuration options: [Auto] [1] – [15]
tWRWR [Auto]
Configuration options: [Auto] [1] – [7]
tWRWR_dr [Auto]
Configuration options: [Auto] [1] – [15]
tWRWR_dd [Auto]
Configuration options: [Auto] [1] – [15]
Dec_WRD
Configuration options: [Auto] [0] – [1]
tRDWR [Auto]
Configuration options: [Auto] [1] – [31]
tRDWR_dr [Auto]
Configuration options: [Auto] [1] – [31]
tRDWR_dd [Auto]
Configuration options: [Auto] [1] – [31]
3-14
Chapter 3: BIOS setup
MISC
MRC Fast Boot [Auto]
Allows you to enable, disable or automatically set the MRC fast boot.
Configuration options: [Auto] [�nable] [Disable]
DRAM CLK Period [Auto]
Configuration options: [Auto] [1] – [14]
Channel A/B DIMM Control [Enable Bot...]
Configuration options: [�nable Both DIMMS] [Disable DIMM0] [Disable DIMM1]
[Disable Both DIMMS]
Scrambler Setting [Optimized ...]
Allows you to set the optimized scrambler setting for stability.
Configuration options: [Optimized (ASUS] [Default (MRC)]
DIGI+ Power Control
CPU Load-Line Calibration [Auto]
Load-line is defined by Intel® VRM specification and affects CPU power voltage. The
CPU working voltage will decrease proportionally to CPU loading. Higher load-line
calibration could get higher voltage and good overclocking performance, but increases
the CPU and VRM thermal conditions.
Select from Level 1 to Level 8 to adjust CPU power voltage from 0% to 100%.
The actual performance boost may vary depending on your CPU specification.
DO NOT remove the thermal module. The thermal conditions should be monitored.
CPU Voltage Frequency [Auto]
Frequency switching affects the VRM transient response and the thermal component
conditions. Higher frequency gets quicker transient response.
Configuration options: [Auto] [Manual]
DO NOT remove the thermal module when setting this item to [Manual Mode]. The thermal
conditions should be monitored.
The following item appears only when you set the CPU Voltage Frequency to [Manual].
CPU Fixed Frequency [300]
This item allows you to set a fixed CPU Voltage frequency. Use the <+> or
<-> keys to adjust the value. The values range from 300kHz to 500kHz with
a 50kHz interval.
3-15
ASUS Z87-PRO
The following items appear only when you set the CPU Voltage Frequency to [Auto].
VRM Spread Spectrum [Disabled]
Enable the VRM Spread Spectrum to enhance system stability.
Configuration options: [Disabled] [�nabled]
Active Frequency Mode [Disabled]
Enable the Active Frequency Mode for an enhanced power saving
condition.
Configuration options: [Disabled] [�nabled]
CPU Power Phase Control [Auto]
Allows you to set the power phase control of the CPU.
Configuration options: [Standard] [Optimized] [�xtreme] [Manual Adjustment]
DO NOT remove the thermal module when setting this item to [Extreme] and [Manual
Adjustment]. The thermal conditions should be monitored.
The following item appears only when you set the CPU Power Phase Control to [Manual
Adjustment].
Manual Adjustment [Fast]
Allows you to set a faster phase response for the CPU to increase system
performance or to slower phase response to decrease DRAM power
efficiency.
Configuration options: [Ultra Fast] [Fast] [Medium] [Regular]
CPU Power Duty Control [T.Probe]
DIGI + VRM Duty Control adjusts the current of every VRM phase and the thermal
conditions of every phase component.
[T. Probe]
[Extreme]
Select to maintain the VRM thermal balance.
Select to maintain the current VRM balance.
DO NOT remove the thermal module. The thermal conditions should be monitored.
CPU Current Capability [Auto]
DIGI+ VRM CPU Current Capability provides wider total power range for overclocking.
A higher value setting gets higher VRM power consumption delivery and extends the
overclocking frequency range simultaneously.
Configuration options: [Auto] [100%] [110%] [120%] [130%] [140%]
Choose a higher value when overclocking, or under a high CPU loading for extra power
support.
3-16
Chapter 3: BIOS setup
CPU Power Thermal Control [130]
A higher temperature brings a wider CPU power thermal range and extends the
overclocking tolerance to enlarge the O.C. potential. Use the <+> or <-> keys to adjust
the value. The values depend on the CPU installed.
DO NOT remove the thermal module. The thermal conditions should be monitored.
DRAM Current Capability [100%]
A higher value brings a wider total power range, and extends the overclocking range
simultaneously.
Configuration options: [100%] [110%] [120%] [130%]
DRAM Voltage Frequency [Auto]
Allows you to adjust the DRAM switching frequency. Assign a fixed high DRAM
frequency to increase the O.C. range, or a low DRAM frequency for a better system
stability.
Configuration options: [Auto] [Manual]
The following item appears only when you set set the DRAM Frequency Mode item to
[Manual].
DRAM Fixed Frequency Mode [300]
Allows you to set a fixed DRAM frequency to increase the overclocking
range or a low DRAM frequency for better system stability. Use the <+> or
<-> keys to adjust the value. The values range from 300kHz to 500kHz with
a 50kHz interval.
DRAM Power Phase Control [Auto]
[Auto]
Allows you to set the Auto mode.
[Optimized]
[Extreme]
Allows you to set the ASUS optimized phase tuning profile.
Allows you to set the full phase mode.
CPU Power Management
The subitems in this menu allow you to set the CPU ratio and their features.
Enhanced Intel SpeedStep Technology [Enabled]
Allows the operating system to dynamically adjust the processor voltage and cores
frequency, resulting to a decreased average power consumption and decreased
average heat production.
Configuration options: [Disabled] [�nabled]
Turbo Mode [Enabled]
Allows you to enable your core processor’s speed to run faster than the base operating
frequency when it is below operating power, current and temperature specification limit.
Configuration options: [Disabled] [�nabled]
The following items appear only when you set the Turbo Mode to [Enabled].
3-17
ASUS Z87-PRO
Turbo Mode Parameters
Long Duration Package Power Limit [Auto]
Allows you to limit the Turbo Ratio’s time duration that exceeds the TDP
(Thermal Design Power) for maximum performance. Use the <+> or <->
keys to adjust the value. The values range from 1W t0 4096W.
Package Power Time Window [Auto]
Also known as Power Limit 1, and allows you to maintain the time window
for Turbo Ratio over TDP (Thermal Design Power). Use the <+> or <->
keys to adjust the value. The values range from 1 to 127 in seconds.
Short Duration Package Power Limit [Auto]
Also known as Power Limit 2, and allows you to provide rapid protection
when the package power exceeds the Power Limit 1. Use the <+> or <->
keys to adjust the value. The values range from 1W t0 4096W.
CPU Integrated VR Current Limit [Auto]
Allows you to set a higher current limit to prevent frequency and power
throttling when overclocking. Use the <+> or <-> keys to adjust the value.
The values range from 0.125 to 1023.875 with a 0.125 interval.
CPU Internal Power Switching Frequency
Frequency Tuning Mode [Auto]
Allows you to increase or decrease the switching frequency of the internal regulator.
Decrease to help consume less power or increase to help votlage stability. When this
item is set to [+] or [-], the Frequency Tuning Offset appears and allows you to set its
value from 0% to 6%.
CPU Internal Power Fault Control
Thermal Feedback [Auto]
Allows your system to take precautionary actions to be taken by the CPU when the
thermal conditions of the external regulator exceeds the threshold.
Configuration options: [Auto] [Disabled] [�nabled]
CPU Integrated VR Fault Management [Auto]
Disable this item to prevent tripping the Fully Integrated Voltage Regulator when doing
over-voltage. We recommend you to disable this item when overclocking.
Configuration options: [Auto] [High Performance] [Balanced]
CPU Internal Power Configuration
CPU Integrated VR Efficiency Management [Auto]
Allows you to improve power saving when the processor is in low power state. Disable
to make the Fully Integrated Voltage Regulator work in high performance at all times.
Configuration options: [Auto] [High Performance] [Balanced]
3-18
Chapter 3: BIOS setup
Power Decay Mode [Auto]
Allows your system to improve the power saving mode on the Fully Integrated Voltage
Regulator as the processor goes into low current state.
Configuration options: [Auto] [Disabled] [�nabled]
Idle Power-in Response [Auto]
Allows you to set the slew rate for the Fully Integrated Voltage Regulator as it enters
manual override mode.
Configuration options: [Auto] [Regular] [Fast]
Idle Power-out Response [Auto]
Allows you to set the slew rate for the Fully Integrated Voltage Regulator as it exits
manual override mode.
Configuration options: [Auto] [Regular] [Fast]
Power Current Slope [Auto]
Allows you to set the gradient of the high-speed active phase current balance during
load transients to eliminate current imbalance that can result from a load current
oscillating near the switching frequency.
Configuration options: [Auto] [L�V�L -4] - [L�V�L 4]
Power Current Offset [Auto]
Allows you to increase or decrease the output current sensed by the CPU. It finds the
balance between optimal regulating while staying below the current threshold.
Configuration options: [Auto] [100%] [87.5%] [75.0%] [62.5%] [50.0%] [37.5%] [25.0%]
[12.5%] [0%] [-12.5%] [-25.0%] [-37.5%] [-50.0%] [-62.5%] [-75.0%] [-87.5%] [-100%]
Power Fast Ramp Response [Auto]
Allows you to increase to enhance the response of the voltage regulator during the
load transient.
Configuration options: [Auto] [0.00] - [1.50]
CPU Internal Power Saving Control
Power Saving Level 1 Threshold [Auto]
Lower value provides sufficient overclocking tolerance to enlarge the overclocking
potential. Higher value provides better power-saving condition.Use <+> or <-> key to
adjust the value. The values range from 0A to 80A at 1Amp increment.
Power Saving Level 2 Threshold [Auto]
Lower value provides sufficient overclocking tolerance to enlarge the overclocking
potential. Higher value provides better power-saving condition.Use <+> or <-> key to
adjust the value. The values range from 0A to 50A at 1Amp increment.
Power Saving Level 3 Threshold [Auto]
Lower value provides sufficient overclocking tolerance to enlarge the overclocking
potential. Higher value provides better power-saving condition.Use <+> or <-> key to
adjust the value. The values range from 0A to 30A at 1Amp increment.
3-19
ASUS Z87-PRO
Extreme OV [Disabled]
Default set to DIsabled and help to protect CPU not been burned by Over Voltage. When set
to Enabled, you might choose high level voltage to overclock, but not guaranteed CPU life.
Configuration options: [Disabled] [�nabled]
CPU Core Voltage [Auto]
Allows you to configure the amount of voltage fed to the cores of the processor. Increase the
amount of voltage when increasing core frequency.
Configuration options: [Auto] [Manual Mode] [Offset Mode] [Adaptive Mode]
The following item appears only when you set the CPU Core Voltage to [Manual].
CPU Core Voltage Override [Auto]
Allows you to set the CPU Core Voltage override. Use the <+> or <-> keys to adjust the
value, The values range from 0.001V to 1.920V with a 0.001V interval.
The following items appear only when you set the CPU Core Voltage to [Offset Mode] or
[Adaptive Mode].
Offset Mode Sign [+]
[+]
[–]
To offset the voltage by a positive value.
To offset the voltage by a negative value.
CPU Core Voltage Offset
Use the <+> or <-> keys to adjust the value. The values range from 0.001V
to 0.999V with a 0.001V interval.
The following item appears only when you set the CPU Core Voltage to [Adaptive Mode].
Additional Turbo Mode CPU Core Voltage [Auto]
Allows you to add voltage for Turbo Mode CPU core. Use the <+> or <->
keys to adjust the value. The values range from 0.001V to 1.920V with a
0.001V interval.
CPU Cache Voltage [Auto]
Allows you to configure the amount of voltage fed to the uncore of the processor including its
cache. Increase the voltage when increasing Ring frequency.
Configuration options: [Auto] [Manual Mode] [Offset Mode]
The following item appears only when you set the CPU Cache Voltage to [Manual Mode].
CPU Cache Voltage Override [Auto]
Allows you to set the CPU Cache Voltage override. Use the <+> or <-> keys to adjust
the value, The values range from 0.001V to 1.920V with a 0.001V interval.
The following items appear only when you set the CPU Core Voltage to [Offset Mode].
3-20
Chapter 3: BIOS setup
Offset Mode Sign [+]
[+]
[–]
To offset the voltage by a positive value.
To offset the voltage by a negative value.
CPU Cache Voltage Offset
Allows you to set the CPU cache voltage offset. Use the <+> or <-> keys to adjust the
value. The values range from 0.001V to 0.999V with a 0.001V interval.
CPU Graphics Voltage [Auto]
Allows you to configure the amount of voltage fed to the onboard graphics unit on the
processor. Increase the amount of voltage when increasing iGPU frequency.
Configuration options: [Auto] [Manual Mode] [Offset Mode] [Adaptive Mode]
The following item appears only when you set the CPU Core Voltage to [Manual].
CPU Graphics Voltage Override [Auto]
Allows you to set the CPU Graphics Voltage override. Use the <+> or <-> keys to
adjust the value, The values range from 0.001V to 1.920V with a 0.001V interval.
The following items appear only when you set the CPU Core Voltage to [Offset Mode] or
[Adaptive Mode].
Offset Mode Sign [+]
[+]
[–]
To offset the voltage by a positive value.
To offset the voltage by a negative value.
CPU Graphics Voltage Offset
Use the <+> or <-> keys to adjust the value. The values range from 0.001V
to 0.999V with a 0.001V interval.
The following item appears only when you set the CPU Core Voltage to [Adaptive Mode].
Additional Turbo Mode CPU Graphics Voltage [Auto]
This item allows you to add voltage for Turbo Mode CPU Graphics. Use
the <+> or <-> keys to adjust the value. The values range from 0.001V to
1.920V with a 0.001V interval.
CPU System Agent Voltage Offset Mode Sign [+]
[+]
[–]
To offset the voltage by a positive value.
To offset the voltage by a negative value.
CPU System Agent Voltage Offset [Auto]
Allows you to configure the amount of voltage fed to the system agent of the processor
including its PCIe controller and power control unit. Increase the amount of voltage
when increasing DRAM frequency. Use the <+> or <-> keys to adjust the value. The
values range from 0.001V to 0.999V with a 0.001V interval.
3-21
ASUS Z87-PRO
CPU Analog I/O Voltage Offset Mode Sign [+]
[+]
[–]
To offset the voltage by a positive value.
To offset the voltage by a negative value.
CPU Analog I/O Voltage Offset [Auto]
Allows you to configure the amount of voltage fed to the analog portion of the I/O on
the processor. Increase the amount of voltage when increasing DRAM frequency. Use
the <+> or <-> keys to adjust the value. The values range from 0.001V to 0.999V with
a 0.001V interval.
CPU Digital I/O Voltage Offset Mode Sign [+]
[+]
[–]
To offset the voltage by a positive value.
To offset the voltage by a negative value.
CPU Digital I/O Voltage Offset [Auto]
Allows you to configure the amount of voltage fed to the digital portion of the I/O on the
processor. Increase the amount of voltage when increasing DRAM frequency. Use the
<+> or <-> keys to adjust the value. The values range from 0.001V to 0.999V with a
0.001V interval.
SVID Support [Auto]
When overclocking, set this item to [Enabled]. Disabling this item would stop the processor
from communicating with the external voltage regulator.
Configuration options: [Auto] [Disabled] [�nabled]
The following item appears only when you set SVID Support to [Enabled].
SVID Voltage Override [Auto]
Allows you to set the SVID Voltage override. By default, this item takes the standard
value of the installed CPU. You can use the <+> or <-> keys to adjust the value. The
values range from 0.001V to 2.440V with a 0.001V interval.
CPU Input Voltage [Auto]
Allows you to set an input voltage for the processor by the external voltage regulator. By
default, this item takes the standard value of the installed CPU. You can use the <+> or <->
keys to adjust the value. The values range from 0.800V to 3.040V with a 0.010V interval.
DRAM Voltage [Auto]
Allows you to set the DRAM voltage. You can use the <+> or <-> keys to adjust the value.
The values range from 1.20V to 1.92V with a 0.005V interval.
According to Intel® CPU specifications, DIMMs with voltage requirement over 1.65V may
damage the CPU permanently. We recommend that you install the DIMMs with the voltage
requirement below 1.65V.
PCH VLX Voltage [Auto]
Allows you to set the voltage for the I/O on the PCH. Use the <+> or <-> keys to adjust the
value. The values range from 1.2000V to 2.0000V with a 0.0125V interval.
3-22
Chapter 3: BIOS setup
PCH Voltage [Auto]
Allows you to set the Core voltage for the PCH (Platform Controller Hub). You can use the
<+> or <-> keys to adjust the value. The values range from 0.70V to 1.50V with a 0.0125V
interval.
•
The values of the CPU PLL Voltage, CPU Manual Voltage, CPU Offset Voltage,
iGPU Manual Voltage, iGPU Offset Voltage, DRAM Voltage, VCCSA Voltage, VCCIO
Voltage, and PCH Voltage items are labeled in different color, indicating the risk levels
of high voltage settings.
•
The system may need better cooling system for a more stable performance under high
voltage settings.
VTTDDR Voltage [Auto]
Allows you to set the termination voltage for the system memory. You can use the <+> or <->
keys to adjust the value. The values range from 0.6000V to 1.0000V with a 0.0125V interval.
DRAM CTRL REF Voltage [Auto]
This item is the DRAM reference voltage for the control lines from the memory bus. You can
use the <+> or <-> keys to adjust the value. The values range from 0.3950x to 0.6300x with a
0.0050x interval.
DRAM DATA REF Voltage on CHA/CHB [Auto]
This item is the DRAM reference voltage for the data lines on Channels A and B. You can
use the <+> or <-> keys to adjust the value. The values range from 0.395x to 0.630x with a
0.005x interval.
Clock Crossing VBoot [Auto]
Allows you to increase the value of the clock crossing voltage boot when the rising edge of
the BCLK DN is equal to the falling edge of the BCLK DP. You can use the <+> or <-> keys to
adjust the value. The values range from 0.1V to 1.9V with a 0.00625V interval.
Clock Crossing Reset Voltage [Auto]
Allows you to increase the value of the clock crossing reset voltage when the rising edge of
the BCLK DN is equal to the falling edge of the BCLK DP. You can use the <+> or <-> keys to
adjust the value. The values range from 0.1V to 1.9V with a 0.00625V interval.
Clock Crossing Voltage [Auto]
Allows you to increase the value of the clock crossing voltage when the rising edge of the
BCLK DN is equal to the falling edge of the BCLK DP. You can use the <+> or <-> keys to
adjust the value. The values range from 0.1V to 1.9V with a 0.00625V interval.
CPU Spread Spectrum [Auto]
[Auto]
Automatic configuration.
[Disabled]
[Enabled]
Enhances the BCLK overclocking ability.
Sets to [Enabled] for EMI control.
3-23
ASUS Z87-PRO
3.6.1
CPU Configuration
The items in this menu show the CPU-related information that the BIOS automatically
detects.
The items in this menu may vary based on the CPU installed.
Intel Adaptive Thermal Monitor [Enabled]
[Enabled]
[Disabled]
Enables the overheated CPU to throttle its clock speed to cool down.
Disables the CPU thermal monitor function.
Hyper-threading [Enabled]
The Intel Hyper-Threading Technology allows a hyper-threading processor to appear as two
logical processors to the operating system, allowing the operating system to schedule two
threads or processes simultaneously.
[Enabled]
[Disabled]
Two threads per activated core are enabled.
Only one thread per activated core is enabled.
This Item apears only if you installed a CPU that supports the Intel Hyper-threading
technology.
Active Processor Cores [All]
Allows you to choose the number of CPU cores to activate in each processor package.
Configuration options: [All] [1] [2] [3]
3-25
ASUS Z87-PRO
Limit CPUID Maximum [Disabled]
[Enabled]
Allows legacy operating systems to boot even without support for CPUs
with extended CPUID functions.
[Disabled]
Disables this function.
Execute Disable Bit [Enabled]
[Enabled]
Enables the No-Execution Page Protection Technology.
Forces the XD feature flag to always return to zero (0).
[Disabled]
Intel Virtualization Technology [Disabled]
[Enabled]
[Disabled]
Allows a hardware platform to run multiple operating systems separately
and simultaneously, enabling one system to virtually function as several
systems.
Disables this function.
Hardware Prefetcher [Enabled]
[�nabled]
Allows a hardware platform to automatically analyze the requirements and
prefetch data and codes for the CPU.
[Disabled]
Disables this function.
Adjacent Cache Line Prefetch [Enabled]
[Enabled]
[Disabled]
Allows a hardware platform to perform adjacent cache line prefetching.
Disables this function.
Boot performance mode [Max Non-Turbo Performance]
Allows you to select the boot performance before entering the OS.
Configuration options: [Max Non-Turbo Performance] [Max Battery] [Turbo Performance]
Dynamic Storage Accelerator [Disabled]
Allows you to enable or disable Dynamic Storage Accelerator for C state configuration.
Configuration options: [�nabled] [Disabled]
CPU Power Management Configuration
This item allows you to manage and configure the CPU’s power.
Enhanced Intel SpeedStep Technology [Enabled]
Allows your system to adjust the processor’s voltage and cores frequency, resulting in
decreased power consumption and heat production.
[Disabled]
[Enabled]
The CPU runs at its default speed.
The system controls the CPU speed.
3-26
Chapter 3: BIOS setup
Turbo Mode [Enabled]
Allows you to set the processor cores to run faster than the base frequency when
operating below power, current and temperature specification limit.
Configuration options: [�nabled] [Disabled]
CPU C States
Allows you to enable or disable the CPU C states.
Configuration options: [Auto] [�nabled] [Disabled]
The following items appear only when you set the CPU C States to [Enabled].
Enhanced C1 state [Enabled]
Allows your processor to reduce power when the system is in idle mode.
Configuration options: [�nabled] [Disabled]
CPU C3 Report [Enabled]
Allows you to disable or enable the CPU C3 report to the operating system.
Configuration options: [�nabled] [Disabled]
CPU C6 Report [Enabled]
Allows you to disable or enable the CPU C6 report to the operating system.
Configuration options: [�nabled] [Disabled]
C6 Latency [Short]
Allows you to set the duration of C6 latency for C6 state.
Configuration options: [Short] [Long]
CPU C7 Report [CPU C7s]
Allows you to disable or enable the CPU C7 report to the operating system.
Configuration options: [Disabled] [CPU C7] [CPU C7s]
C7 Latency [Long]
Allows you to set the duration of C7 latency for C7 state.
Configuration options: [Short] [Long]
Package C State Support [Auto]
Allows you to set the a C-state according to the following configuration
options: [Auto] [Enabled] [C0/C1] [C2] [C3] [C6] [CPU C7] [CPU C7s]
3-27
ASUS Z87-PRO
3.6.2
PCH Configuration
PCI Express Configuration
Allows you to configure the PCI �xpress slots.
DMI Link ASPM Control [Auto]
Allows you to control the ASPM (Active State Power Management) on both Northbridge
side and Southbridge side of the DMI Link.
Configuration options: [Disabled] [�nabled] [Auto]
ASPM Support [Disabled]
Allows you to set the ASPM level.
Configuration options: [Disabled] [Auto] [L0s] [L1] [L0sL1]
PCIe Speed [Auto]
Allows you to select the PCI Express port speed.
Configuration options: [Auto] [Gen1] [Gen2]
Intel Rapid Start Technology [Disabled]
Allows you to enable or disable Intel® Rapid Start Technology.
Configuration options: [�nabled] [Disabled]
The following items appear only when you set the Intel® Rapid Start Technology to
[Enabled].
Entry on S3 RTC Wake [Enabled]
The system automatically wakes up and set to Rapid Start Technology S3 mode.
Configuration options: [�nabled] [Disabled
Entry After [0]
Allows you to set the RTC wake-up timer at S3 entry. The time ranges from
0 minute (immediately) to 120 minutes.
Active Page Threshold Support [Enabled]
The system automatically goes into sleep mode when the partition size is not enough
for the Intel® Rapid Start Technology to work.
Configuration options: [�nabled] [Disabled]
3-28
Chapter 3: BIOS setup
Active Memory Threshold [0]
Key in the value for the additional partition size for Rapid Start Technology
to work.
�nsure that the caching partition size is larger than the total memory size.
Hybrid Hard Disk Support [Disabled]
Allows you to enable or disable the hybrid hard disk support.
Configuration options: [�nabled] [Disabled]
Intel Smart Connect Technology [Disabled]
Allow you to enable or disable the Intel® Smart Connect Technology.
Configuration options: [�nabled] [Disabled]
3.6.3
SATA Configuration
While entering Setup, the BIOS automatically detects the presence of SATA devices. The
SATA Port items show Not Present if no SATA device is installed to the corresponding SATA
port.
Scroll down to display the other BIOS items.
3-29
ASUS Z87-PRO
SATA Mode Selection [AHCI]
Allows you to set the SATA configuration.
[Disabled]
[IDE]
Disables the SATA function.
Set to [IDE Mode] when you want to use the Serial ATA hard disk drives as
Parallel ATA physical storage devices.
[AHCI]
Set to [AHCI Mode] when you want the SATA hard disk drives to use the
AHCI (Advanced Host Controller Interface). The AHCI allows the onboard
storage driver to enable advanced Serial ATA features that increases
storage performance on random workloads by allowing the drive to
internally optimize the order of commands.
[RAID]
Set to [RAID Mode] when you want to create a RAID configuration from the
SATA hard disk drives.
Aggressive LPM Support [Auto]
Allows you to enable the PCH to aggressively enter link power state.
Configuration options: [Disabled] [�nabled] [Auto]
S.M.A.R.T. Status Check [Enabled]
S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) is a monitor system. When
read/write of your hard disk errors occur, this feature allows the hard disk to report warning
messages during the POST. Configuration options: [�nabled] [Disabled]
Hot Plug [Disabled] (SATA6G_1 - SATA6G_6 [Yellow])
These items appear only when you set the SATA Mode Selection item to [AHCI] or [RAID],
and allow you to enable/disable SATA Hot Plug Support.
Configuration options: [Disabled] [�nabled]
3-30
Chapter 3: BIOS setup
3.6.4
System Agent Configuration
VT-d [Disabled]
Allows you to enable virtualization technology function on memory control hub.
[Enabled]
[Disabled]
Enables the function.
Disables this function.
CPU Audio Devices [Enabled]
Allows you to enable or disable CPU SA Audio devices.
Configuration options: [�nabled] [Disabled]
DVI Port Audio [Disabled]
Allows you to enable or disable DVI port Audio.
Configuration options: [�nabled] [Disabled]
Graphics Configuration
Allows you to select a primary display from iGPU, and PCIe graphical devices.
Primary Display [Auto]
Allows you to select which of the iGPU/PCIE Graphics device for Primary Display.
Configuration options: [Auto] [iGPU] [PCI�] [PCI]
iGPU Memory [Auto]
Allows you to select the amount of system memory allocated to DVMT 5.0 used by the
iGPU.
Configuration options: [Auto] [32M] [64M] [96M] [128M] [160M] [192M] [224M] [256M]
[288M] [320M] [352M] [384M] [416M] [448M] [480M] [512M] [1024M]
Render Standby [Auto]
Allows you to enable the Intel Graphics Render Standby support to reduce the iGPU
power use when idle.
Configuration options: [Auto] [Disabled] [�nabled]
3-31
ASUS Z87-PRO
iGPU Multi-Monitor [Disabled]
Allows you to enable the iGPU Multi-Monitor. The iGPU shared system memory size
will be fixed at 64MB.
Configuration options: [Disabled] [�nabled]
DMI Configuration
Allows you to control various DMI (Desktop Management Interface) functions.
DMI Gen 2 [Auto]
Allows you to enable or disable DMI Gen 2.
Configuration options: [Auto] [�nabled] [Disabled]
NB PCIe Configuration
Allows you to configure the NB PCI �xpress settings.
PCIEx16_1/2 Link Speed [Auto]
Allows you to configure the PCI�x16 speed.
Configuration options: [Auto] [Gen1] [Gen2] [Gen3]
DMI Link ASPM Control [Auto]
Allows you to enable or disable the control of Active State Power Management on SA
side of the DMI Link.
Configuration options: [Auto] [Disabled] [L0s] [L1] [L0sL1]
PEG - ASPM [Disabled]
Allows you to control ASPM support for the PEG device.
Configuration options: [Disabled] [Auto] [ASPM L0s] [ASPM L1] [ASPM L0sL1]
Memory Configuration
Allows you to configure the memory configuration parameters.
Memory Scrambler [Enabled]
Allows you to enable or disable the Memory Scrambler support.
Configuration options: [�nabled] [Disabled]
Memory Remap [Enabled]
Allows you to enable remapping the memory above 4GB.
Configuration options: [�nabled] [Disabled]
3-32
Chapter 3: BIOS setup
3.6.5
USB Configuration
The items in this menu allow you to change the USB-related features.
The USB Devices item shows the auto-detected values. If no USB device is detected, the
item shows None.
Legacy USB Support [Enabled]
[Enabled]
[Disabled]
Enables the support for USB devices on legacy operating systems (OS).
The USB devices can be used only for the BIOS setup program. It cannot
be recognized in boot devices list.
[Auto]
Allows the system to detect the presence of USB devices at startup. If
detected, the USB controller legacy mode is enabled. If no USB device is
detected, the legacy USB support is disabled.
Intel xHCI Mode [Smart Auto]
[Auto]
Keeps the last operation of xHCI controller in OS during bootup.
[Smart Auto]
[Enabled]
[Disabled]
Enables the operation of xHCI controller.
Enables the xHCI controller.
Disables the xHCI controller.
EHCI Hand-off [Disabled]
[Enabled]
Enables the support for operating systems without an EHCI hand-off
feature.
[Disabled]
Disables the EHCI Hand-off support.
Mass Storage Devices [Auto]
Allows the system to detect the devices according to their media formats.
Configuration options: [Auto] [Floppy] [Forced FDD] [Hard Disk] [CD-ROM]
USB Single Port Control
Allows you to enable or disable the individual USB port.
Refer to section 1.2.2 Motherboard layout for the location of the USB ports.
3-33
ASUS Z87-PRO
3.6.6
Platform Misc Configuration
The items in this menu allow you to configure the platform-related features.
PCI Express Native Power Management [Disabled]
Allows you to enhance the power saving feature of PCI Express and perform ASPM
operations in the operating system.
Configuration options: [Disabled] [�nabled]
The following item appears only when you set the PCI Express Native Power Management
to [Enabled].
Native ASPM [Disabled]
[Enabled]
[Disabled]
Vista controls the ASPM support for the device.
BIOS controls the ASPM support for the device.
3-34
Chapter 3: BIOS setup
3.6.7
Onboard Devices Configuration
Scroll down to view the other BIOS items.
HD Audio Controller [Enabled]
[�nabled]
�nables the High Definition Audio Controller.
[Disabled]
Disables the controller.
The following items appear only when you set the HD Audio Controller to [Enabled].
Front Panel Type [HD]
Allows you to set the front panel audio connector (AAFP) mode to legacy AC’97 or
high-definition audio depending on the audio standard that the front panel audio
module supports.
[HD]
Sets the front panel audio connector (AAFP) mode to high definition
audio.
[AC97]
Sets the front panel audio connector (AAFP) mode to legacy AC’97
SPDIF Out Type [SPDIF]
[SPDIF]
[HDMI]
Sets to an SPDIF audio output.
Sets to an HDMI audio output.
3-35
ASUS Z87-PRO
ASM1061 Storage Controller (SATA6G_E12) [Enabled]
Allows you to select the ASM1061 storage controller operating mode.
[Disabled]
[Enabled]
Disables the ASM1061 storage controller.
Enables the ASM1061 storage controller.
Hot-plug [Enabled]
Allows you to set the Hot Plug support.
Configuration options: [Disabled] [�nabled]
PCI Express X16_3 slot (dark brown) bandwidth [Auto]
[Auto]
PCIeX16_3 slot runs at X1 mode for system resource optimization
(PCIeX1_2 will be disabled).
[X4 mode]
[X1 mode]
PCIeX16_3 slot runs at X4 mode for high performance support (SATA6G_
E12, PCIEX1_2, PCIEX1_3, PCIEX1_4 will be disabled).
PCIeX16_3 slot runs at X1 mode for more available PCIeX1 slots
(SATA6G_E12 will be disabled).
Bluetooth Controller [Enabled]
[Enabled]
[Disabled]
Enables the onboard Bluetooth controller.
Disables the onboard Bluetooth controller.
Wi-Fi Controller [Enabled]
[Enabled]
[Disabled]
Enables the onboard Wi-Fi controller.
Disables the onboard Wi-Fi controller.
Intel LAN Controller [Enabled]
[Enabled]
[Disabled]
Enables the Intel® LAN controller.
Disables the Intel® LAN controller.
Intel PXE OPROM [Disabled]
This item appears only when you set the previous item to [Enabled] and allows you to enable
or disable the PXE OptionRom of the Intel® LAN controller.
Configuration options: [�nabled] [Disabled]
3-36
Chapter 3: BIOS setup
3.6.8
APM
ErP Ready [Disabled]
Allows you to switch off some power at S4+S5 or S5 to get the system ready for ErP
requirement. When set to [Enabled], all other PME options will be switched off.
Configuration options: [Disabled] [�nabled (S4+S5] [�nabled (S5)]
Restore AC Power Loss [Power Off]
[Power On]
[Power Off]
[Last State]
The system goes into ON state after an AC power loss.
The system goes into OFF state after an AC power loss.
The system goes into either OFF or ON state, whatever the system state
was before the AC power loss.
Power On By PS/2 Keyboard [Disabled]
[Disabled]
[Space Bar]
[Ctrl-Esc]
Disables the Power On by a PS/2 keyboard.
Sets the Space Bar on the PS/2 keyboard to turn on the system.
Sets the Ctrl+Esc key on the PS/2 keyboard to turn on the system.
[Power Key]
Sets Power key on the PS/2 keyboard to turn on the system. This feature
requires an ATX power supply that provides at least 1A on the +5VSB lead.
Power On By PCIE/PCI [Disabled]
[Disabled]
Disables the PCIE/PCI devices to generate a wake-on-LAN feature of the
Intel®/LAN device or other installed PCIE LAN devices.
[Enabled]
Enables the PCIE/PCI devices to generate a wake-on-LAN feature of the
Intel®/LAN device or other installed PCIE LAN devices.
Power On By RTC [Disabled]
[Disabled]
[Enabled]
Disables RTC to generate a wake event.
When set to [Enabled], the items RTC Alarm Date (Days) and Hour/
Minute/Second will become user-configurable with set values.
3-37
ASUS Z87-PRO
3.6.9
Network Stack
Network Stack [Disable]
This item allows user to disable or enable the UEFI network stack.
Configuration options: [Disable] [�nable]
The following item appears only when you set the Network Stack to [Enabled].
Ipv4/Ipv6 PXE Support [Enabled]
Allows you to enable or disable the Ipv4/Ipv6 PXE boot option.
Configuration options: [Disabled] [�nabled]
3-38
Chapter 3: BIOS setup
3.7
Monitor menu
The Monitor menu displays the system temperature/power status, and allows you to change
the fan settings.
Scroll down to display the other BIOS items.
CPU Temperature / MB Temperature [xxxºC/xxxºF]
The onboard hardware monitor automatically detects and displays the CPU and motherboard
temperatures. Select [Ignore] if you do not wish to display the detected temperatures.
CPU Fan Speed [xxxx RPM] or [Ignore] / [N/A], CPU OPT Speed [xxxx RPM]
or [Ignore] / [N/A], Chassis Fan 1/4 Speed [xxxx RPM] or [Ignore] / [N/A]
The onboard hardware monitor automatically detects and displays the CPU, chassis,
and power fan speed in rotations per minute (RPM). If the fan is not connected to the
motherboard, the field shows N/A. Select [Ignore] if you do not wish to display the detected
speed.
CPU core 0-3 Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage
The onboard hardware monitor automatically detects the voltage output through the onboard
voltage regulators. Select [Ignore] if you do not want to detect this item.
3-39
ASUS Z87-PRO
CPU Q-Fan Control [Auto]
Allows you to set the CPU Q-Fan operating mode.
[Auto Mode]
Enables the CPU Q-Fan operating mode.
[Advance Mode] When a 3-pin CPU fan is installed, select this mode for the DC mode
Q-Fan control.
[Disabled]
Disables the Q-Fan control.
The following items appear only when you set the CPU Q-Fan Control to [Advance Mode]
and [Auto].
CPU Fan Speed Low Limit [600 RPM]
Allows you to set the low limit warning for CPU Fan speed.
Configuration options: [Ignore] [200 RPM] [300 RPM] [400 RPM] [500 RPM] [600 RPM]
CPU Fan Profile [Standard]
Allows you to set the appropriate performance level of the CPU fan.
[Standard]
Set to make the CPU fan adjust automatically depending on the CPU
temperature.
[Silent]
[Turbo]
[Manual]
Set to minimize the fan speed for quiet CPU fan operation.
Set to achieve maximum CPU fan speed.
Set to assign the detailed fan speed control parameters.
The following items appear only when you set the CPU Fan Profile to [Manual].
CPU Upper Temperature [70]
Use the <+> or <-> keys to adjust the upper limit of the CPU temperature.
The values range from 20ºC to 75ºC.
CPU Fan Max. Duty Cycle(%) [100]
Use the <+> or <-> keys to adjust the maximum CPU fan duty cycle. The
values range from 20% to 100%. When the CPU temperature reaches the
upper limit, the CPU fan will operate at the maximum duty cycle.
CPU Lower Temperature [20]
Displays the lower limit of the CPU temperature.
CPU Fan Min. Duty Cycle(%) [20]
Use the <+> or <-> keys to adjust the minimum CPU fan duty cycle. The
values range from 0% to 100%. When the CPU temperature is under 40ºC,
the CPU fan will operate at the minimum duty cycle.
Chassis Q-Fan Control 1/4 [Enabled]
[Disabled]
[Enabled]
Disables the Chassis Q-Fan control feature.
Enables the Chassis Q-Fan control feature.
3-40
Chapter 3: BIOS setup
Chassis Fan Speed Low Limit 1/4 [600 RPM]
This item appears only when you enable the Chassis Q-Fan Control feature and allows you
to disable or set the chassis fan warning speed.
Configuration options: [Ignore] [200 RPM] [300 RPM] [400 RPM] [500 RPM] [600 RPM]
Chassis Fan 1/4 Profile [Standard]
This item appears only when you enable the Chassis Q-Fan Control feature. It allows
you to set the appropriate performance level of the chassis fan.
[Standard]
Set to make the chassis fan adjust automatically depending on the
chassis temperature.
[Silent]
[Turbo]
[Manual]
Set to minimize the fan speed for quiet chassis fan operation.
Set to achieve maximum chassis fan speed.
Set to assign detailed fan speed control parameters.
The following items appear only when you set the Chassis Fan Profile to [Manual].
Chassis Upper Temperature 1/4 [70]
Use the <+> or <-> keys to adjust the upper limit of the CPU temperature.
The values range from 40ºC to 75ºC.
Chassis Fan Max. Duty Cycle(%) 1/4 [100]
Use the <+> or <-> keys to adjust the maximum chassis fan duty cycle. The
values range from 60% to 100%. When the chassis temperature reaches
the upper limit, the chassis fan will operate at the maximum duty cycle.
Chassis Lower Temperature 1/4 [40]
Displays the lower limit of the chassis temperature.
CPU Fan Min. Duty Cycle(%) 1/4 [60]
Use the <+> or <-> keys to adjust the minimum chassis fan duty cycle. The
values range from 60% to 100%. When the chassis temperature is under
40ºC, the chassis fan will operate at the minimum duty cycle.
Anti Surge Support [Enabled]
This item allows you to enable or disable the Anti Surge function.
Configuration options: [Disabled] [�nabled]
3-41
ASUS Z87-PRO
3.8
Boot menu
The Boot menu items allow you to change the system boot options.
Boot Configuration
Fast Boot [Enabled]
[Disabled]
[Enabled]
Allows your system to go back to its normal boot speed.
Allows your system to accelerate the boot speed.
The following items appear only when you set the Fast Boot to [Enabled].
USB Support [Partial In...]
[Disabled]
All USB devices will not be available until OS boot up for a
fastest POST time.
[Full Initialization] All USB devices will be available during POST. This process will
extend the POST time.
[Partial
Initialization]
For a faster POST time, only USB ports with keyboard and
mouse connections will be detected.
3-42
Chapter 3: BIOS setup
PS/2 Keyboard and Mouse Support [Auto]
Select any of these settings when PS/2 keyboard and mouse are installed. These
settings only apply when Fast Boot is enabled.
[Auto]
For a faster POST time, PS/2 devices will only be
available when the system boots up or rebooted when the
PS/2 devices have not been reconnected or changed. If
you disconnect or change PS/2 devices before restarting
the system, PS/2 devices will not be available and BIOS
setup program will not be accessible via PS/2 devices.
[Full Initialization]
For full system control, PS/2 devices will be available
during POST at any circumstances. This process will
extend POST time.
[Disabled]
For the fastest POST time, all PS/2 devices will not be
available until your computer enters the operating system.
Network Stack Driver Support [Disabled]
[Disabled]
[Enabled]
Select to skip the network stack driver from loading during POST.
Select to load the network stack driver during POST.
Next Boot after AC Power Loss [Normal Boot]
[Normal Boot] Returns to normal boot on the next boot after an AC power loss.
[Fast Boot]
Accelerates the boot speed on the next boot after an AC power loss.
HW Fast Boot [Disabled]
Allows the system to enable or disable the HW Fast Boot.
Configuration options: [Disabled] [�nabled]
DirectKey Enable [Go to BIOS...]
[Disabled]
Disables the DirectKey button. The system will only power on or off
when you press the DirectKey button.
[Go to BIOS
Setup]
Allows the system to power on and go to the BIOS Setup directly when
you press the DirectKey button.
3-43
ASUS Z87-PRO
Boot Logo Display [Enabled]
[Enabled]
[Disabled]
Enables the full screen boot logo display during POST.
Disables the full screen boot logo display during POST.
Boot Logo Size Control [Auto]
[Auto]
[Full Screen]
Automatically adjusts for Windows® requirements.
Maximizes the boot logo size.
Post Delay Time [3 sec]
This item appears only when you set the Full Screen Logo item to [Enabled]. This item
allows you to select a desired additional POST waiting time to easily enter the BIOS
Setup. You can only execute the POST delay time during normal boot. The values
range from 0 to 10 seconds.
This feature will only work when set under normal boot.
Bootup NumLock State [On]
[On]
[Off]
Set the power-on state of the NumLock to [On].
Set the power-on state of the NumLock to [Off].
Wait For ‘F1’ If Error [Enabled]
[Disabled]
[Enabled]
Disables the function.
The system waits for the <F1> key to be pressed when error occurs.
Option ROM Messages [Force BIOS]
[Force BIOS]
The third-party ROM messages will be displayed during the boot sequence.
[Keep Current] The third-party ROM messages will be displayed only if the third-party
manufacturer had set the add-on device to do so.
Interrupt 19 Capture [Disabled]
Allows you to trap Interrupt 19 by the option ROMs.
Configuration options: [Disabled] [�nabled]
Setup Mode [EZ Mode]
[Advanced Mode] Allows you to go to Advanced Mode of the BIOS after POST.
[EZ Mode]
Allows you to go to EZ Mode of the BIOS after POST.
3-44
Chapter 3: BIOS setup
CSM (Compatibility Support Module)
Allows you to configure the CSM (Compatibility Support Module) items to fully support the
various VGA, bootable devices and add-on devices for better compatibility.
Launch CSM [Auto]
[Auto]
The system automatically detects the bootable devices and the add-
on devices.
[Enabled]
[Disabled]
For better compatibility, enable the CSM to fully support the non-UEFI
driver add-on devices or the Windows® UEFI mode.
Disable the CSM to fully support the non-UEFI driver add-on devices
or the Windows® UEFI mode.
The following items appear only when you set the Launch CSM to [Enabled].
Boot Devices Control [UEFI and Legacy OpROM]
Allows you to select the type of devices that you want to boot.
Configuration options: [U�FI and Legacy OpROM] [Legacy OpROM only]
[UEFI only]
Boot from Network Devices [Legacy OpROM first]
Allows you to select the type of network devices that you want to launch.
Configuration options: [Legacy OpROM first] [U�FI driver first] [Ignore]
Boot from Storage Devices [Legacy OpROM first]
Allows you to select the type of storage devices that you want to launch.
Configuration options: [Both, Legacy OpROM first] [Both, U�FI first]
[Legacy OpROM first] [U�FI driver first] [Ignore]
Boot from PCIe/PCI Expansion Devices [Legacy OpROM first]
Allows you to select the type of PCIe/PCI expansion devices that you want
to launch.
Configuration options: [Legacy OpROM first] [U�FI driver first]
Secure Boot
Allows you to configure the Windows® Secure Boot settings and manage its keys to protect
the system from unauthorized access and malwares during POST.
OS Type [Windows UEFI mode]
[Windows UEFI
Mode]
Allows you to select your installed operating system. Execute
the Microsoft® Secure Boot check. Only select this option when
booting on Windows® UEFI mode or other Microsoft® Secure
Boot compliant OS.
[Other OS]
Get the optimized function when booting on Windows® non-
UEFI mode, or other Microsoft® Secure Boot non compliant OS.
Microsoft® Secure Boot only supports Windows® UEFI mode.
The following item appears only when you set the OS Type to [Windows UEFI mode].
3-45
ASUS Z87-PRO
Key Management
This item appears only when you set OS Type to [Windows UEFI Mode]. It allows you
to manage the Secure Boot keys.
Install Default Secure Boot keys
Allows you to immediately load the default Security Boot keys, Platform key
(PK), Key-exchange Key (KEK), Signature database (db), and Revoked
Signatures (dbx). When the default Secure boot keys are loaded, the PK
state will change from Unloaded mode to loaded mode.
Clear Secure Boot keys
This item appears only when you load the default Secure Boot keys. This
item allows you to clear all default Secure Boot keys.
Save Secure Boot Keys
Allows you to save the PK (Platform Keys) to a USB storage device.
PK Management
The Platform Key (PK) locks and secures the firmware from any permissible changes.
The system verifies the PK before your system enters the OS.
Delete PK
Allows you to delete the PK from your system. Once the PK is deleted, all
the system’s Secure Boot keys will not be active.
Configuration options: [Yes] [No]
Load PK from File
Allows you to load the downloaded PK from a USB storage device.
The PK file must be formatted as a U�FI variable structure with time-based authenticated
variable.
KEK Management
The KEK (Key-exchange Key or Key Enrollment Key) manages the Signature database
(db) and Revoked Signature database (dbx).
Key-exchange Key (KEK) refers to Microsoft® Secure Boot Key-Enrollment Key (KEK).
Delete the KEK
Allows you to delete the KEK from your system.
Configuration options: [Yes] [No]
Load KEK from File
Allows you to load the downloaded KEK from a USB storage device.
Append KEK from File
Allows you to load the additional KEK from a storage device for an
additional db and dbx loaded management.
The K�K file must be formatted as a U�FI variable structure with time-based authenticated
variable.
3-46
Chapter 3: BIOS setup
DB Management
The db (Authorized Signature database) lists the signers or images of U�FI
applications, operating system loaders, and UEFI drivers that you can load on the
single computer.
Delete the db
Allows you to delete the db file from your system.
Configuration options: [Yes] [No]
Load db from File
Allows you to load the downloaded db from a USB storage device.
Append db from File
Allows you to load the additional db from a storage device so that more
images can be loaded securely.
The db file must be formatted as a U�FI variable structure with time-based authenticated
variable.
DBX Management
The dbx (Revoked Signature database) lists the forbidden images of db items that are
no longer trusted and cannot be loaded.
Delete the dbx
Allows you to delete the dbx file from your system.
Load dbx from File
Allows you to load the downloaded dbx from a USB storage device.
Configuration options: [Yes] [No]
Append dbx from File
Allows you to load the additional dbx from a storage device so that more
db’s images cannot be loaded.
The dbx file must be formatted as a U�FI variable structure with time-based authenticated
variable.
3-47
ASUS Z87-PRO
3.9
Tools menu
The Tools menu items allow you to configure options for special functions. Select an item
then press <Enter> to display the submenu.
3.9.1
ASUS EZ Flash 2 Utility
Allows you to run ASUS �Z Flash 2. When you press <�nter>, a confirmation message
appears. Use the left/right arrow key to select between [Yes] or [No], then press <Enter> to
confirm your choice.
For more details, refer to section 3.11.2 ASUS EZ Flash 2.
3.9.2
ASUS O.C. Profile
This item allows you to store or load multiple BIOS settings.
The Setup Profile Status items show Not Installed if no profile is created.
Label
Allows you to key in a label of the setup profile.
3-48
Chapter 3: BIOS setup
Save to Profile
Allows you to save the current BIOS settings to the BIOS Flash, and create a profile. Key in a
profile number from one to eight, press <�nter>, and then select Yes.
Load from Profile
Allows you to load the previous BIOS settings saved in the BIOS Flash. Key in the profile
number that saved your BIOS settings, press <Enter>, and then select Yes.
•
DO NOT shut down or reset the system while updating the BIOS to prevent the
system boot failure!
•
We recommend that you update the BIOS file only coming from the same memory/
CPU configuration and BIOS version.
3.9.3
ASUS SPD Information
Allows you to view the DRAM SPD information.
3-49
ASUS Z87-PRO
3.10
Exit menu
The Exit menu items allow you to load the optimal default values for the BIOS items, and
save or discard your changes to the BIOS items. You can access the EZ Mode from the Exit
menu.
Load Optimized Defaults
This option allows you to load the default values for each of the parameters on the Setup
menus. When you select this option or if you press <F5>, a confirmation window appears.
Select Yes to load the default values.
Save Changes & Reset
Once you are finished making your selections, choose this option from the �xit menu to
ensure the values you selected are saved. When you select this option or if you press <F10>,
a confirmation window appears. Select Yes to save changes and exit.
Discard Changes & Exit
This option allows you to exit the Setup program without saving your changes. When you
select this option or if you press <�sc>, a confirmation window appears. Select Yes to
discard changes and exit.
ASUS EZ Mode
This option allows you to enter the EZ Mode screen.
Launch EFI Shell from filesystem device
This option allows you to attempt to launch the �FI Shell application (shellx64.efi) from one of
the available filesystem devices.
3-50
Chapter 3: BIOS setup
3.11
Updating BIOS
The ASUS website publishes the latest BIOS versions to provide enhancements on system
stability, compatibility, or performance. However, BIOS updating is potentially risky. If there
is no problem using the current version of BIOS, DO NOT manually update the BIOS.
Inappropriate BIOS updating may result in the system’s failure to boot. Carefully follow the
instructions of this chapter to update your BIOS if necessary.
Visit the ASUS website at www.asus.com to download the latest BIOS file for this
motherboard.
The following utilities allow you to manage and update the motherboard BIOS setup program.
1.
2.
3.
EZ Update: Updates the BIOS in Windows® environment.
ASUS �Z Flash 2: Updates the BIOS using a USB flash drive.
ASUS CrashFree BIOS 3: Restores the BIOS using the motherboard support DVD or a
USB flash drive when the BIOS file fails or gets corrupted.
4.
ASUS BIOS Updater: Updates and back ups the BIOS in DOS environment using the
motherboard support DVD and a USB flash disk drive.
3.11.1
EZ Update
The EZ Update is a utility that allows you to update the motherboard BIOS in Windows®
environment.
•
•
EZ Update requires an Internet connection either through a network or an ISP
(Internet Service Provider).
This utility is available in the support DVD that comes with the motherboard package.
3-51
ASUS Z87-PRO
3.11.2
ASUS EZ Flash 2
ASUS �Z Flash 2 allows you to update the BIOS without having to use a bootable floppy disk
or an OS-based utility.
Before you start using this utility, download the latest BIOS from the ASUS website
at www.asus.com.
To update the BIOS using EZ Flash 2:
1.
Insert the USB flash disk that contains the latest BIOS file to the USB port.
2.
Enter the Advanced Mode of the BIOS setup program. Go to the Tool menu to select
ASUS EZ Flash Utility and press <Enter> to enable it.
3.
4.
Press <Tab> to switch to the Drive field.
Press the Up/Down arrow keys to find the USB flash disk that contains the latest BIOS,
and then press <Enter>.
5.
6.
Press <Tab> to switch to the Folder Info field.
Press the Up/Down arrow keys to find the BIOS file, and then press <�nter> to perform
the BIOS update process. Reboot the system when the update process is done.
3-52
Chapter 3: BIOS setup
•
This function can support devices such as a USB flash disk with FAT 32/16 format and
single partition only.
•
DO NOT shut down or reset the system while updating the BIOS to prevent system
boot failure!
Ensure to load the BIOS default settings to ensure system compatibility and stability. Select
the Load Optimized Defaults item under the �xit menu. See section 3.9 Exit Menu for
details.
3.11.3
ASUS CrashFree BIOS 3
The ASUS CrashFree BIOS 3 utility is an auto recovery tool that allows you to restore the
BIOS file when it fails or gets corrupted during the updating process. You can restore a
corrupted BIOS file using the motherboard support DVD or a USB flash drive that contains
the BIOS file.
The BIOS file in the motherboard support DVD may be older than the BIOS file published
on the ASUS official website. If you want to use the newer BIOS file, download the file at
http://support.asus.com and save it to a USB flash drive.
Recovering the BIOS
To recover the BIOS:
1.
Turn on the system.
2.
Insert the motherboard support DVD to the optical drive, or the USB flash drive
containing the BIOS file to the USB port.
3.
The utility automatically checks the devices for the BIOS file. When found, the utility
reads the BIOS file and enters ASUS �Z Flash 2 automatically.
4.
The system requires you to enter BIOS Setup to recover the BIOS setting. To ensure
system compatibility and stability, we recommend that you press <F5> to load default
BIOS values.
DO NOT shut down or reset the system while updating the BIOS! Doing so can cause
system boot failure!
3-53
ASUS Z87-PRO
3.11.4
ASUS BIOS Updater
The ASUS BIOS Updater allows you to update the BIOS in DOS environment. This utility also
allows you to copy the current BIOS file that you can use as a backup when the BIOS fails or
gets corrupted during the updating process.
The succeeding utility screens are for reference only. The actual utility screen displays may
not be same as shown.
Before updating BIOS
1.
Prepare the motherboard support DVD and a USB flash drive in FAT32/16 format and
single partition.
2.
Download the latest BIOS file and BIOS Updater from the ASUS website at
http://support.asus.com and save them on the USB flash drive.
•
•
NTFS is not supported under DOS environment. Do not save the BIOS file and BIOS
Updater to a hard disk drive or USB flash drive in NTFS format.
Do not save the BIOS file to a floppy disk due to low disk capacity.
3.
Turn off the computer and disconnect all SATA hard disk drives (optional).
Booting the system in DOS environment
1.
Insert the USB flash drive with the latest BIOS file and BIOS Updater to the USB port.
2.
Boot your computer. When the ASUS Logo appears, press <F8> to show the BIOS
Boot Device Select Menu. Insert the support DVD into the optical drive and select the
optical drive as the boot device.
Please select boot device:
SATA: XXXXXXXXXXXXXXXX
USB XXXXXXXXXXXXXXXXX
UEFI: XXXXXXXXXXXXXXXX
Enter Setup
↑ and ↓ to move selection
ENTER to select boot device
ESC to boot using defaults
3-54
Chapter 3: BIOS setup
3.
4.
When the Make Disk menu appears, select the FreeDOS command prompt item by
pressing the item number.
At the FreeDOS prompt, type d: and press <Enter> to switch the disk from Drive C
(optical drive) to Drive D (USB flash drive).
Welcome to FreeDOS (http://www.freedos.org)!
C:\>d:
D:\>
Updating the BIOS file
To update the BIOS file using BIOS Updater:
1.
At the FreeDOS prompt, type bupdater /pc /g and press <Enter>.
D:\>bupdater /pc /g
2.
The BIOS Updater screen appears as below.
ASUSTek BIOS Updater for DOS V1.30 [2013/02/22]
FLASH TYPE:
MX1C 25L1065A
Current ROM
Update ROM
BOARD:UNKNOWN
VER: UNKNOWN
DATE: UNKNOWN
BOARD:
VER:
Z87-PRO
0204
DATE:
01/01/2012
PATH:
A:\
Z87P.CAP
2097152 2013-02-22 17:30:48
A:
Note
[Enter] Select or Load
[Tab] Switch
[B] Backup
[V] Drive Info
[Esc] Exit
[Up/Down/Home/End] Move
3.
Press <Tab> to switch between screen fields and use the <Up/Down/Home/�nd> keys
to select the BIOS file and press <�nter>. BIOS Updater checks the selected BIOS file
and prompts you to confirm BIOS update.
Are you sure to update BIOS?
Yes
No
3-55
ASUS Z87-PRO
4.
Select Yes and press <Enter>. When BIOS update is done, press <ESC> to exit BIOS
Updater. Restart your computer.
DO NOT shut down or reset the system while updating the BIOS to prevent system boot
failure!
•
•
For BIOS Updater version 1.04 or later, the utility automatically exits to the DOS
prompt after updating BIOS.
Ensure to load the BIOS default settings to ensure system compatibility and stability.
Select the Load Optimized Defaults item under the Exit BIOS menu. See Chaper 3
of your motherboard user manual for details.
•
�nsure to connect all SATA hard disk drives after updating the BIOS file if you have
disconnected them.
3-56
Chapter 3: BIOS setup
Chapter 4:
Software support
Software support
4
4.1
Installing an operating system
•
This motherboard supports 32-bit/64-bit Windows® 7 and 32-bit/64-bit Windows®
operating systems (OS).
8
•
Motherboard settings and hardware options vary. The setup procedures presented
in this chapter are for reference only. Refer to Windows® operating system
documentation for detailed information.
4.2
Support DVD information
The contents of the support DVD are subject to change at any time without notice. Visit the
ASUS website at www.asus.com for updates.
4.2.1
Running the support DVD
Place the support DVD into the optical drive. The DVD automatically displays the Drivers menu
if Autorun is enabled in your computer. Click each menu tab and select the items you want to
install.
The Manual menu contains
the list of supplementary user
manuals. Click an item to open
the folder of the user manual.
The Drivers menu shows the available
device drivers if the system detects
installed devices. Install the necessary
drivers to use the devices.
The AHCI/RAID Driver
menu contains the
RAID/AHCI driver disk.
Click the Contact
tab to display the
ASUS contact
information.
The Utilities
menu shows the
applications and
other software that
the motherboard
supports.
Click an icon
to display DVD/
motherboard
information
Click an item
to install
If Autorun is NOT enabled in your computer, browse the contents of the support DVD to
locate the file ASS�TUP.�X� from the BIN folder. Double-click the ASSETUP.EXE to run
the DVD.
4-1
ASUS Z87-PRO
4.2.2
Obtaining the software manuals
The software manuals are included in the support DVD. Follow the instructions below to get
the necessary software manuals.
The software manual files are in Portable Document Format (PDF). Install the Adobe®
Acrobat® Reader from the Utilities tab before opening the files.
To read about your motherboard’s utility guide:
1.
Click Manual tab > ASUS
Motherboard Utility Guide.
2.
From the Manual folder, open the
folder of the software manual that
you wish to read.
3.
Some software manuals are
provided in different languages.
Open the language’s folder to view
the software manual.
The screenshots in this section are for reference only. The actual software manuals
containing in the support DVD vary by models.
4-2
Chapter 4: Software support
4.3
Software information
Most of the applications in the support DVD have wizards that will conveniently guide you
through the installation. View the online help or readme file that came with the software
application for more information.
4.3.1
AI Suite 3
AI Suite 3 is an all-in-one interface that integrates several ASUS utilities and allows you to
launch and operate these utilities simultaneously.
Installing AI Suite 3
To install AI Suite 3 on your computer:
1.
Place the support DVD to the optical drive. The Special tab appears if your computer
has enabled the Autorun feature.
2.
3.
4.
Click Utilities tab > AI Suite 3.
Follow the onscreen instructions to complete the installation.
After the AI Suite 3 is installed, restart your computer.
Using AI Suite 3
You can launch the AI Suite 3 for the following Windows® operating systems:
•
•
For Windows® 7, click
For Windows® 8, click the AI Suite 3 app from the Start Screen.
on the notification area.
When launched, the main screen of the AI Suite 3 appears. To go to the AI Suite 3 main
menu bar, click on the top edge of the screen.
The main screen of the AI Suite 3 is for reference only and vary with models.
Main screen
Click to launch AI Suite 3 menu bar
4-3
ASUS Z87-PRO
AI Suite 3 main menu bar
Wi-Fi
Engine
System
Information
4-Way Optimization
Wi-Fi GO!
EZ Update
USB 3.0 Boost
USB BIOS
Flashback Wizard
Network
iControl
Ai Charger+
USB Charger+
•
•
The screeshots of AI Suite 3 in this user manual are for reference only. The actual
screenshots vary with models.
Refer to the software manual in the support DVD or visit the ASUS website at
www.asus.com for detailed software configuration.
4-4
Chapter 4: Software support
4.3.2
USB 3.0 Boost
USB 3.0 Boost technology supports UASP (USB Attached SCSI Protocol) that automatically
speeds up the transfer rates of your USB storage devices.
Launching USB 3.0 Boost
To launch USB 3.0 Boost, click
on the AI Suite 3 main menu bar.
on the top edge of the screen, then click USB 3.0 Boost
Using the USB 3.0 Boost
1.
2.
3.
Connect your USB 3.0 device to the USB 3.0 port.
From the USB 3.0 Boost screen, select a USB device.
To enable UASP on your USB device, click UASP. To revert to its normal transfer rate,
click Normal.
USB 3.0 Boost screen
Click to enable the USB
device’s normal data
transfer rate
Click to enable UASP or
Turbo Mode to the USB
device for a faster data
transfer rate
Click to select a USB device
•
•
Refer to the software manual in the support DVD or visit the ASUS website at
www.asus.com for detailed software configuration.
Use the USB 3.0 devices for high performance. The data transfer speed varies with
USB devices.
4-5
ASUS Z87-PRO
4.3.3
USB BIOS Flashback Wizard
USB BIOS Flashback Wizard allows you to check and save the latest BIOS version to a USB
storage device. Use this utility to quickly check for the latest available BIOS and set the BIOS
download schedule.
USB BIOS Flashback Wizard screen
Set a schedule for
the BIOS Update
download
Current BIOS
information
Click to check
for a new BIOS
update available
for download
Click to cancel
the download
schedule setting
Click to apply
the download
schedule setting
Scheduling the BIOS download
1.
In the Download Setting field, tick Schedule (days) then select the number of days for
the BIOS download schedule.
2.
Click Apply to save the BIOS download schedule. Click Cancel to cancel the
download schedule.
Downloading the updated BIOS
Before you start downloading, ensure that you have installed the USB storage device to
your computer’s USB port that supports USB BIOS Flashback. Refer to section
2.3.1 Rear I/O connection of your user manual for more details.
To download the updated BIOS:
1.
From the USB BIOS Flashback screen,
click Check for New BIOS Update.
Wait for the system to check the latest
BIOS version.
4-6
Chapter 4: Software support
2.
After the utility detects a new BIOS, click
from the Save to: field, select the USB
flash drive, then click Download.
3.
After the download is complete, click OK.
4-7
ASUS Z87-PRO
4.3.4
Ai Charger+
Ai Charger+ allows you to fast-charge your portable BC 1.1* mobile devices on your
computer’s USB port three times faster than the standard USB devices**.
Launching Ai Charger+
To launch Ai Charger+, click
the AI Suite 3 main menu bar.
on the top edge of the screen, then click Ai Charger+ on
Ai Charger+ screen
Tick to enable or
disable Ai Charger+
Tick to apply the
selection
•
•
* Check the manufacturer if your USB device is a Battery Charging Specification 1.1
(BC 1.1) compliant or compatible device.
** Actual charging speeds may vary depending on the charging rate and specifications
of your USB device.
•
•
To ensure normal charging function, disconnect and reconnect your USB device every
time you enable or disable Ai Charger+.
The Ai Charger+ does not support USB hubs/ extension cables and generic USB
cables.
4-8
Chapter 4: Software support
4.3.5
EZ Update
EZ Update is a utility that allows you to automatically update your motherboard’s softwares,
drivers and the BIOS version easily.
With this utlity, you can also manually update the BIOS and select the boot logo that will
display during POST.
Launching EZ Update
To launch EZ Update, click
AI Suite 3 main menu bar.
on the top edge of the screen, then click EZ Update on the
EZ Update screen
Click to automatically update your
motherboard’s driver, software and firmware
Click to select a
Click to update
the BIOS
Click to search and
select the BIOS file
boot logo
4-9
ASUS Z87-PRO
4.3.6
Network iControl
Network iControl is a one-stop setup network control center that allows you to manage your
network bandwidth and set the bandwidth priority for your running programs.
Launching Network iControl
To launch Network iControl, click
on the top edge of the screen, then click Network
iControl on the AI Suite 3 main menu bar.
•
•
Ensure to install the LAN drivers before using this utility.
Network iControl can only support the onboard LAN.
EZ Start screen
Click to
activate
Network
iControl
Click to select
a profile
Tick to enable the
selected profile
Click to apply the
changes made
EZ Profile screen
Click to save the profile
settings or rename the profile
Click to select
a network
profile
Tick to assign
a schedule of
your network
programs to
avoid network
congestions
Click to set the
program as
High, Normal,
or Low priority
Select a
program from
this list and
click
to
add to your
network profile
4-10
Chapter 4: Software support
4.3.7
USB Charger+
USB Charger+ allows you to quick-charge your portable USB devices even if your computer
is off, in sleep mode or hibernate mode.
Before using USB Charger+, ensure to disable the ErP Ready item from the Advanced >
APM > ErP Ready in the Advanced mode of the BIOS Setup program.
Launching USB Charger+
To launch USB Charger+, click
on the AI Suite 3 main menu bar.
on the top edge of the screen, then click USB Charger+
USB Charger+ screen
Click to detect
the connected
USB device
Indicates that
the connected
USB device
is in charging
mode
Click to fast-
charge your
USB device
Click to stop
charging your
USB device
Click to apply
the settings
Click to discard
the settings
Click to select the type of USB device that
you wish to charge when the system is off
Ensure to connect your USB device into the USB port that supports this utility. Refer to
section 2.3.1 Rear I/O connection of your user manual for more details.
•
The USB Charger+ does not support USB hubs and USB extension cables, and
generic USB cables.
•
The USB Charger+ may not recognize some ASUS devices due to a special design.
4-11
ASUS Z87-PRO
4.3.8
System Information
This utility allows you get the detailed information of the motherboard, CPU, and memory
settings.
Launching the System Information
To launch System Information, click
on the top edge of the screen, then click System
Information on the AI Suite 3 main menu bar.
Viewing the motherboard information
From the System Information screen, click MB tab to view the motherboard’s information.
Viewing the CPU information
From the System Information screen, click CPU tab to view the processor’s information.
4-12
Chapter 4: Software support
Viewing the SPD information
From the System Information screen, click SPD tab to view the memory’s information.
4.3.9
Audio configurations
The Realtek® audio CODEC provides 8-channel audio capability to deliver the ultimate audio
experience on your computer. The software provides Jack-Sensing function, S/PDIF Out
support, and interrupt capability. The CODEC also includes the Realtek® proprietary UAJ®
(Universal Audio Jack) technology for all audio ports, eliminating cable connection errors, and
giving users plug and play convenience.
Follow the installation wizard to install the Realtek® Audio Driver from the support DVD that
came with the motherboard package.
If the Realtek® audio software is correctly installed, you will find the
Realtek® HD Audio Manager icon on the taskbar. Double-click on
the icon to display the Realtek® HD Audio Manager.
Realtek® HD Audio Manager
4-13
ASUS Z87-PRO
A.
Realtek® HD Audio Manager with DTS UltraPC II for Windows® 8 /
Windows® 7
Advanced
settings
Configuration option tabs (vary with the audio devices connected)
Set default
device
Control
settings panel
Analog and digital connector status
This version of Realtek HD Audio Manager supports Intel® 8 Series motherboards and other
selected models.
4-14
Chapter 4: Software support
B.
Realtek® HD Audio Manager with DTS UltraPC II for Windows® 8 /
Windows® 7
To display Quick Volume Adjustment Bar, click
from the taskbar then click
.
To launch Realtek® HD Audio Manager, click
from the taskbar then double-click
.
Configuration option tabs (vary with the audio devices connected)
Advanced
settings
Click to exit
Click to minimize
Information
Control settings
Click to set
default device
Click to
set default
communication
device
Connector
settings
Analog and digital connector status
•
•
Refer to the software manual in the support DVD or visit the ASUS website at
www.asus.com for detailed software configuration.
To play Blu-Ray™ disc, make sure to use an HDCP compliant monitor.
4-15
ASUS Z87-PRO
4-16
Chapter 4: Software support
Chapter 5:
RAID support
RAID support
5
5.1
RAID configurations
The motherboard supports the following SATA RAID solutions:
•
Intel® Rapid Storage Technology with RAID 0, RAID 1, RAID 10 and RAID 5 support.
If you want to install a Windows® operating system to a hard disk drive included in a RAID
set, you have to create a RAID driver disk and load the RAID driver during OS installation.
Refer to section 5.2 Creating a RAID driver disk for details.
5.1.1
RAID definitions
RAID 0 (Data striping) optimizes two identical hard disk drives to read and write data in
parallel, interleaved stacks. Two hard disks perform the same work as a single drive but at a
sustained data transfer rate, double that of a single disk alone, thus improving data access
and storage. Use of two new identical hard disk drives is required for this setup.
RAID 1 (Data mirroring) copies and maintains an identical image of data from one drive to
a second drive. If one drive fails, the disk array management software directs all applications
to the surviving drive as it contains a complete copy of the data in the other drive. This RAID
configuration provides data protection and increases fault tolerance to the entire system. Use
two new drives or use an existing drive and a new drive for this setup. The new drive must be
of the same size or larger than the existing drive.
RAID 5 stripes both data and parity information across three or more hard disk drives. Among
the advantages of RAID 5 configuration include better HDD performance, fault tolerance, and
higher storage capacity. The RAID 5 configuration is best suited for transaction processing,
relational database applications, enterprise resource planning, and other business systems.
Use a minimum of three identical hard disk drives for this setup.
RAID 10 is data striping and data mirroring combined without parity (redundancy data) having
to be calculated and written. With the RAID 10 configuration you get all the benefits of both
RAID 0 and RAID 1 configurations. Use four new hard disk drives or use an existing drive
and three new drives for this setup.
5-1
ASUS Z87-PRO
5.1.2
Installing Serial ATA hard disks
The motherboard supports Serial ATA hard disk drives. For optimal performance, install
identical drives of the same model and capacity when creating a disk array.
To install the SATA hard disks for a RAID configuration:
1.
2.
3.
Install the SATA hard disks into the drive bays.
Connect the SATA signal cables.
Connect a SATA power cable to the power connector on each drive.
5.1.3
Setting the RAID item in BIOS
You must enable the RAID function in the BIOS Setup before creating RAID sets using SATA
HDDs. To do this:
1.
2.
3.
4.
Enter the BIOS Setup during POST.
Go to the Advanced menu > SATA Configuration, and then press <Enter>.
Set the SATA Mode item to [RAID Mode].
Save your changes, and then exit the BIOS Setup.
Refer to Chapter 3 for details on entering and navigating through the BIOS Setup
Due to chipset limitation, when SATA ports are set to RAID mode, all SATA ports run at
RAID mode together.
5-2
Chapter 5: RAID configurations
5.1.4
Intel® Rapid Storage Technology Option ROM utility
To enter the Intel® Rapid Storage Technology Option ROM utility:
1.
2.
Turn on the system.
During POST, press <Ctrl> + <I> to display the utility main menu.
Intel(R) Rapid Storage Technology - Option ROM - v10.5.1.1070
Copyright(C) 2003-10 Intel Corporation. All Rights Reserved.
[ MAIN MENU ]
4. Recovery Volume Options
5. Acceleration Options
6. Exit
1. Create RAID Volume
2. Delete RAID Volume
3. Reset Disks to Non-RAID
[ DISK/VOLUME INFORMATION ]
RAID Volumes:
None defined.
Physical Devices:
Port Device Model
Serial #
9LS0HJA4
9LS0F4HL
3LS0JYL8
9LS0BJ5H
Size Type/Status(Vol ID)
Non-RAID Disk
Non-RAID Disk
Non-RAID Disk
Non-RAID Disk
0
1
2
3
ST3160812AS
ST3160812AS
ST3160812AS
ST3160812AS
149.0GB
149.0GB
149.0GB
149.0GB
[↑↓]-Select
[ESC]-Exit
[ENTER]-Select Menu
The navigation keys at the bottom of the screen allow you to move through the menus
and select the menu options.
The RAID BIOS setup screens shown in this section are for reference only and may not
exactly match the items on your screen.
The utility supports maximum four hard disk drives for RAID configuration.
5-3
ASUS Z87-PRO
Creating a RAID set
To create a RAID set:
1.
From the utility main menu, select 1. Create RAID Volume and press <Enter>. The
following screen appears:
Intel(R) Rapid Storage Technology - Option ROM - v10.5.1.1070
Copyright(C) 2003-10 Intel Corporation. All Rights Reserved.
[ CREATE VOLUME MENU ]
Name:
RAID Level:
Disks:
Volume0
Strip Size:
Capacity:
Sync:
Create volume
[ HELP ]
Enter a unique volume name that has no special characters and is
16 characters or less.
[↑↓]-Select
[ESC]-Exit
[ENTER]-Select Menu
2.
3.
Enter a name for the RAID set and press <Enter>.
When the RAID Level item is selected, press the up/down arrow key to select a RAID
level to create, and then press <Enter>.
4.
When the Disks item is selected, press <Enter> to select the hard disk drives you want
to include in the RAID set. The SELECT DISKS screen appears:
[ SELECT DISKS ]
Port Drive Model
Serial #
9LS0HJA4
9LS0F4HL
3LS0JYL8
9LS0BJ5H
Size Status
0
1
2
3
ST3160812AS
ST3160812AS
ST3160812AS
ST3160812AS
149.0GB Non-RAID Disk
149.0GB Non-RAID Disk
149.0GB Non-RAID Disk
149.0GB Non-RAID Disk
Select 2 to 6 disks to use in creating the volume.
[↑↓]-Prev/Next [SPACE]-SelectDisk [ENTER]-Done
5-4
Chapter 5: RAID configurations
5.
Use the up/down arrow key to select a drive, and then press <Space> to select. A small
triangle marks the selected drive. Press <Enter> after completing your selection.
6.
Use the up/down arrow key to select the stripe size for the RAID array (for RAID 0, 10
and 5 only),and then press <�nter>. The available stripe size values range from 4KB
to 128KB. The following are typical values:
•
•
•
RAID 0: 128KB
RAID 10: 64KB
RAID 5: 64KB
We recommend a lower stripe size for server systems, and a higher stripe size for
multimedia computer systems used mainly for audio and video editing.
7.
8.
When the Capacity item is selected, enter the RAID volume capacity that you want
and press <Enter>. The default value indicates the maximum allowed capacity.
When the Create Volume item is selected, press <Enter>. The following warning
message appears:
WARNING: ALL DATA ON SELECTED DISKS WILL BE LOST.
Are you sure you want to create this volume? (Y/N):
9.
Press <Y> to create the RAID volume and return to the main menu, or <N> to go back
to the CREATE VOLUME menu.
5-5
ASUS Z87-PRO
Deleting a RAID set
Be cautious when deleting a RAID set. You will lose all data on the hard disk drives when
you delete a RAID set.
To delete a RAID set:
1.
From the utility main menu, select 2. Delete RAID Volume and press <Enter>. The
following screen appears:
[ DELETE VOLUME MENU ]
Name
Volume0
Level
RAID0(Stripe)
Drives
2
Capacity
298.0GB
Status
Normal
Bootable
Yes
[ HELP ]
Deleting a volume will reset the disks to non-RAID.
WARNING:
ALL DISK DATA WILL BE DELETED.
(This does not apply to Recovery volumes)
[↑↓]-Select
[ESC]-Previous Menu
[DEL]-Delete Volume
2.
Use the up/down arrow key to select the RAID set you want to delete, and then press
<delete>. The following warning message appears:
[ DELETE VOLUME VERIFICATION ]
ALL DATA IN THE VOLUME WILL BE LOST!
(This does not apply to Recovery volumes)
Are you sure you want to delete volume “Volume0”? (Y/N):
3.
Press <Y> to delete the RAID set and return to the utility main menu, or press <N> to
return to the DELETE VOLUME menu.
5-6
Chapter 5: RAID configurations
Exiting the Intel® Rapid Storage Technology Option ROM utility
To exit the utility:
1.
From the utility main menu, select 5. Exit, and then press <Enter>. The following
warning message appears:
[ CONFIRM EXIT ]
Are you sure you want to exit? (Y/N):
2.
Press <Y> to exit or press <N> to return to the utility main menu.
5.2
Creating a RAID driver disk
A floppy disk with the RAID driver is required when installing a Windows® operating system
on a hard disk drive that is included in a RAID set.
The motherboard does not provide a floppy drive connector. You have to use a USB floppy
disk drive when creating a SATA RAID driver disk.
5.2.1
Creating a RAID driver disk without entering the OS
To create a RAID driver disk without entering the OS:
1.
2.
3.
4.
5.
6.
7.
8.
Boot your computer.
Press <delete> during POST to enter the BIOS setup utility.
Set the optical drive as the primary boot device.
Insert the support DVD into the optical drive.
Save changes and exit BIOS.
When the Make Disk menu appears, press <1> to create a RAID driver disk.
Insert a formatted floppy disk into the USB floppy disk drive, then press <�nter>.
Follow the succeeding screen instructions to complete the process.
5-7
ASUS Z87-PRO
5.2.2
Creating a RAID driver disk in Windows®
To create a RAID driver disk in Windows®:
1.
2.
3.
4.
Start Windows®.
Plug the USB floppy disk drive and insert a floppy disk.
Place the motherboard support DVD into the optical drive.
Go to the Intel AHCI/RAID Driver menu then click Intel AHCI/RAID Driver path to
open the RAID driver folder.
5.
Select 32bit or 64bit folder depending on your operating system. Copy the files of the
selected folder to the root path of your USB floppy disk drive.
Write-protect the floppy disk to avoid a computer virus infection.
5.2.3
Installing the RAID driver during Windows® OS
installation
To install the RAID driver for Windows® 7:
1.
2.
3.
4.
During the OS installation, click Load Driver to allow you to select the installation
media containing the RAID driver.
Insert the USB flash drive with RAID driver into the USB port or the support DVD into
the optical drive, and then click Browse.
Click the name of the device you’ve inserted, go to Drivers > RAID, and then select
the RAID driver for the corresponding OS version. Click OK.
Follow the succeeding screen instructions to complete the installation.
Before loading the RAID driver from a USB flash drive, you have to use another computer
to copy the RAID driver from the support DVD to the USB flash drive.
To set up a Windows® UEFI operating system under RAID mode, ensure to load the UEFI
driver for your optical drive.
5-8
Chapter 5: RAID configurations
Appendices
Appendices
Notices
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
•
•
This device may not cause harmful interference.
This device must accept any interference received including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with manufacturer’s instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is
connected.
•
Consult the dealer or an experienced radio/TV technician for help.
The use of shielded cables for connection of the monitor to the graphics card is required
to assure compliance with FCC regulations. Changes or modifications to this unit not
expressly approved by the party responsible for compliance could void the user’s authority
to operate this equipment.
A-1
ASUS Z87-PRO
IC: Canadian Compliance Statement
Complies with the Canadian IC�S-003 Class B specifications. This device complies with RSS
210 of Industry Canada. This Class B device meets all the requirements of the Canadian
interference-causing equipment regulations.
This device complies with Industry Canada license exempt RSS standard(s). Operation is
subject to the following two conditions: (1) this device may not cause interference, and (2)
this device must accept any interference, including interference that may cause undesired
operation of the device.
Cut appareil numérique de la Classe B est conforme à la norme NMB-003 du Canada.
Cet appareil numérique de la Classe B respecte toutes les exigences du Règlement sur le
matériel brouilleur du Canada.
Cet appareil est conforme aux normes CNR exemptes de licence d’Industrie Canada. Le
fonctionnement est soumis aux deux conditions suivantes :
(1) cet appareil ne doit pas provoquer d’interférences et
(2) cet appareil doit accepter toute interférence, y compris celles susceptibles de provoquer
un fonctionnement non souhaité de l’appareil.
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio noise emissions from
digital apparatus set out in the Radio Interference Regulations of the Canadian Department
of Communications.
This class B digital apparatus complies with Canadian ICES-003.
VCCI: Japan Compliance Statement
VCCI Class B Statement
KC: Korea Warning Statement
A-2
Appendices
REACH
Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of
Chemicals) regulatory framework, we published the chemical substances in our products at
ASUS REACH website at http://csr.asus.com/english/REACH.htm.
DO NOT throw the motherboard in municipal waste. This product has been designed to
enable proper reuse of parts and recycling. This symbol of the crossed out wheeled bin
indicates that the product (electrical and electronic equipment) should not be placed in
municipal waste. Check local regulations for disposal of electronic products.
DO NOT throw the mercury-containing button cell battery in municipal waste. This symbol
of the crossed out wheeled bin indicates that the battery should not be placed in municipal
waste.
ASUS Recycling/Takeback Services
ASUS recycling and takeback programs come from our commitment to the highest standards
for protecting our environment. We believe in providing solutions for you to be able to
responsibly recycle our products, batteries, other components as well as the packaging
materials. Please go to http://csr.asus.com/english/Takeback.htm for detailed recycling
information in different regions.
RF Equipment Notices
CE: European Community Compliance Statement
The equipment complies with the RF Exposure Requirement 1999/519/EC, Council
Recommendation of 12 July 1999 on the limitation of exposure of the general public to
electromagnetic fields (0–300 GHz). This wireless device complies with the R&TT� Directive.
Wireless Radio Use
This device is restricted to indoor use when operating in the 5.15 to 5.25 GHz frequency
band.
Exposure to Radio Frequency Energy
The radiated output power of the Wi-Fi technology is below the FCC radio frequency
exposure limits. Nevertheless, it is advised to use the wireless equipment in such a manner
that the potential for human contact during normal operation is minimized.
FCC Bluetooth Wireless Compliance
The antenna used with this transmitter must not be colocated or operated in conjunction with
any other antenna or transmitter subject to the conditions of the FCC Grant.
A-3
ASUS Z87-PRO
Bluetooth Industry Canada Statement
This Class B device meets all requirements of the Canadian interference-causing equipment
regulations.
Cet appareil numérique de la Class B respecte toutes les exigences du Règlement sur le
matériel brouilleur du Canada.
NCC: Taiwan Wireless Statement
Japan RF Equipment Statement
KC (RF Equipment)
A-4
Appendices
ASUS contact information
ASUSTeK COMPUTER INC.
Address
Telephone
Fax
E-mail
Web site
15 Li-Te Road, Peitou, Taipei, Taiwan 11259
+886-2-2894-3447
+886-2-2890-7798
info@asus.com.tw
www.asus.com.tw
Technical Support
Telephone
Online support
+86-21-38429911
support.asus.com
ASUS COMPUTER INTERNATIONAL (America)
Address
Telephone
Fax
800 Corporate Way, Fremont, CA 94539, USA
+1-812-282-3777
+1-510-608-4555
usa.asus.com
Web site
Technical Support
Telephone
Support fax
+1-812-282-2787
+1-812-284-0883
support.asus.com
Online support
ASUS COMPUTER GmbH (Germany and Austria)
Address
Fax
Harkort Str. 21-23, D-40880 Ratingen, Germany
+49-2102-959911
Web site
Online contact
www.asus.de
www.asus.de/sales
Technical Support
Telephone
Support Fax
+49-1805-010923*
+49-2102-9599-11
support.asus.com
Online support
* EUR 0.14/minute from a German fixed landline; EUR 0.42/minute from a mobile phone.
A-5
ASUS Z87-PRO
A-6
Appendices
|
HP Hewlett Packard Hewlett Packard Computer Monitor Q1910 User Manual
GE 00017258 User Manual
Cypress CY8C24994 User Manual
Cypress CY7C68301C User Manual
Cleveland Range Inc Convection Oven Gas Convection Rotisserie and Holding Oven User Manual
Caldera SSK305LP C User Manual
AT T 1440 User Manual
Asus Computer Hardware 90SB0390M0AAY0 User Manual
Apple PowerPC G5 User Manual
Alesis Digital Effects Processor NANOVERB 2 User Manual