Addonics Technologies JUPITER CIPHER EXDRIVE JCEDIU64 User Manual

Addonics  
T E C H N O L O G I E S  
Jupiter Cipher ExDrive  
For the following models:  
JCEDIU64, JCEDIF64, JCEDIS64  
JCEDIU128, JCEDIF128, JCEDIS128  
JCEDIU192, JCEDIF192, JCEDIS192  
User’s Guide  
Version 1.0  
Contents  
FCC Warning...................................................................................1  
Limited Warranty............................................................................ 1  
Contents............................................................................................ 2  
Chapter 1 General Information .........................................................3  
Features............................................................................ 3  
Jupiter Cipher Models ...................................................... 4  
Chapter 2 Jupiter Cipher ExDrive key...............................................5  
Chapter 3 Keeping track of the hard drive.........................................6  
Chapter 4 Jumper Setting for Jupiter Cipher ExDrive .......................7  
Chapter 5 Hardware Installation Guide ........................................8-10  
Chapter 6 Attaching USIB Interface Cable ..................................... 11  
Chapter 7 USB2.0 USIB Interface Cable Driver Installation ...... 12-13  
Serial ATA USIB Interface Cable Driver Installation .... 14  
Firewire USIB Interface Cable Driver Installation ......... 15  
How to use Disk Management ...................................16-17  
Technical Support & Contact Information................................ …18  
Addonics Technologies – Jupiter Cipher ExDrive User’s Guide v1.0  
2
Chapter 1  
General Information  
The Addonics Technologies Jupiter Cipher ExDrive is a portable 2.5” Hard  
Disk Drive kit. The unit is external and uses the USB2.0, Firewire/iLink, and  
Serial ATA interfaces.  
Features  
·
·
·
·
·
·
·
Stylished and rugged black anodized aluminum housing  
Compact size and light weight  
Shock proof - up to 3 feet drop damage protection for the hard drive  
Easy hard drive installation  
Choice of standard or encryption drive enclosure  
The most versatile hard drive kit in the market  
Connect as an External Hard drive to any computer via USB2.0, CardBus,  
Firewire/iLink and Serial ATA port (only one of these cables is included in  
Turn any 2.5” hard drives into external hard drive or removable hard drive  
Use as a removable Hard Drive on Desktops PC with an optional IDE drive  
cradle.  
·
·
·
·
Plug & Play Operation under Windows 98SE, Me, 2000, XP and 2003  
Server  
Portable: Fits any Briefcase or Notebook PC Case.  
Encryption  
·
Hardware based 64-bit DES and 128-bit or 192-bit TDES full disk  
encryption  
·
High performance - Data is encrypted and decrypted on the fly by a  
certified cryptographic engine inside an ASIC without taking any CPU  
resources  
·
·
·
Encryption / Decryption via a hardware key, just like using a regular key to  
open a door.  
Simple to deploy with no training required, no software to install and no  
password to remember  
Platform independency - There is no software or driver to install to use  
Addonics encryption products. As a result, it can be deployed in any  
systems running any OS. This is important in organization with multi  
platform computing and legacy systems.  
Addonics Technologies – Jupiter Cipher ExDrive User’s Guide v1.0  
3
Jupiter Cipher ExDrive  
Item Number Product Description  
JCEDIU64  
JCEDIF64  
Jupiter Cipher ExDrive 64-bit for 2.5” IDE hdd, USB 2.0  
Jupiter Cipher ExDrive 64-bit for 2.5” IDE hdd,  
Firewire/iLink  
JCEDIS64  
JCEDIU128  
JCEDIF128  
Jupiter Cipher ExDrive 64-bit for 2.5” IDE hdd, SATA  
Jupiter Cipher ExDrive 128-bit for 2.5” IDE hdd, USB 2.0  
Jupiter Cipher ExDrive 128-bit for 2.5” IDE hdd,  
Firewire/iLink  
JCEDIS128  
JCEDIU192  
JCEDIF192  
Jupiter Cipher ExDrive 128-bit for 2.5” IDE hdd, SATA  
Jupiter Cipher ExDrive 192-bit for 2.5” IDE hdd, USB 2.0  
Jupiter Cipher ExDrive 192-bit for 2.5” IDE hdd,  
Firewire/iLink  
JCEDIS192  
Jupiter Cipher ExDrive 192-bit for 2.5” IDE hdd, SATA  
Addonics Technologies – Jupiter Cipher ExDrive User’s Guide v1.0  
4
Chapter 2  
Jupiter Cipher ExDrive key  
Check to make sure you have the correct version of Jupiter Cipher ExDrive key.  
The key should match the label at the bottom of the drive enclosure.  
Yellow label DES-64 stands  
for Jupiter Cipher ExDrive  
64-bit key  
Green label TDES-128  
stands for Jupiter  
Cipher ExDrive 128-  
bit key  
Red label TDES-192  
stands for Jupiter  
Cipher ExDrive 192-  
bit key  
IMPORTANT  
There is no back door for the Jupiter Cipher ExDrive encrypted hard drive if  
the key is lost or stolen.  
To ensure that there is a spare key, your Jupiter Cipher ExDrive bundled kit  
comes with one pair of Jupiter Cipher ExDrive keys. These 2 keys have  
identical encryption code. One of these keys should be kept in a safe and secure  
location and can be sent back to Addonics for duplicating additional keys. If  
you are down to the last key, be sure to make a back up of all the data stored  
inside your encrypted hard drive prior to sending the last key to Addonics.  
Addonics is not responsible for key lost in the mail or retrieval of the data  
inside the encrypted hard drive.  
Ø
Ø
Ø
The CIPHER key MUST be inserted at the front of the drive enclosure  
in order for the drive to be ACTIVATED.  
Once the drive is INITIALIZED using the Cipher Key that comes with  
the kit, the drive can only be accessed by the original key.  
The 2 keys that come with each Jupiter Cipher ExDrive bundled kit  
has their own unique encryption code. So the keys among different  
kits are not interchangeable.  
If you have multiple sets of Jupiter Cipher ExDrive kits and would like all the  
keys to have the same encryption code, you may make this request at the time  
of your order or mail the keys together with master key back to Addonics to  
recode them for you. Again be sure that you keep a spare key with you. Make a  
back up of your data if you are mailing in your last key.  
Addonics Technologies – Jupiter Cipher ExDrive User’s Guide v1.0  
5
Chapter 3  
Keeping track of the hard drive  
If you are using the Jupiter Cipher ExDrive drive enclosure to encrypt multiple  
hard drives, it is important to label your hard drive if you are taking the drive  
out of the enclosure. The hard drive with Jupiter Cipher ExDrive encryption  
will look like a brand new drive when attach directly to the IDE or SATA  
controller of a computer. There will be no partition or any hint to indicate that  
the drive contains encrypted data. When the drive is partitioned, all the  
encrypted data will be lost.  
The same holds true if a hard drive already has data on it is installed into the  
Jupiter Cipher ExDrive drive enclosure. The computer detects the hard drive as  
a brand new drive or a drive that is unallocated. Once you proceed to partition  
the drive, the data that was on the hard drive will be erased and cannot be  
recovered.  
A Jupiter Cipher ExDrive encrypted hard drive can be moved to another Jupiter  
Cipher ExDrive drive enclosure. But the same key used in encrypting the hard  
drive must be used in the new drive enclosure in order to access the drive.  
If you are installing multiple Jupiter Cipher ExDrive drive kits into a large  
organization, it is important to keep track of the drive and the encryption  
key. Once it gets mixed up, there is no possible way to recover the data on  
the encrypted hard drive.  
Addonics Technologies – Jupiter Cipher ExDrive User’s Guide v1.0  
6
Chapter 4  
Jumper settings inside the Jupiter Cipher ExDrive Drive Case  
A. If the Jupiter Cipher ExDrive will be used externally with the external AC  
adapter, the switch from the case must be switch to the right, labeled EXT  
to grab power from external power supply.  
Application: Jupiter Cipher ExDrive can be set to receive power EXT and be  
used with all three types of USIB cables.  
B. If the Jupiter Cipher ExDrive will be used externally without the external  
AC adapter, the switch from the case must be switch to the left, labeled  
INT to grab power from system.  
Application: Jupiter Cipher ExDrive can be set to receive power INT and be  
used with the following types of USIB cables: USB2.0 USIB & Firewire USIB  
Note: We recommend setting the hard drive to MASTER mode/setting at all  
times. (Default setting)  
J4 Pin Definition for Master Setting  
Hard Drive Brand  
Hitachi  
Master Setting  
Pin 1~6 Open  
NEC  
Fujitsu  
Toshiba  
Seagate  
Pin 3 - Pin 4 Short  
J1 Pin Definition for USIB Interface  
Hard Drive Setting J1 Jumper Setting  
Master  
Pin 3 - Pin 5 Short  
Addonics Technologies – Jupiter Cipher ExDrive User’s Guide v1.0  
7
Chapter 5  
Hardware Installation Guide  
Exploded View of Enclosure shown with various components  
top cover  
hard drive  
shock  
absorbers  
switch  
PCB  
bottom cover  
screw  
cipher slot  
Step 1  
Separate the top from the bottom cover  
of the drive enclosure by loosening the  
screw as shown on the photo.  
Addonics Technologies – Jupiter Cipher ExDrive User’s Guide v1.0  
8
Step 2  
Align the male IDE connector on the  
2.5” hard drive with the female IDE  
connector on the PCB. Push the hard  
drive till the connector pins on the hard  
drive is fully seated inside the  
connector on the PCB.  
Step 3  
Wrap the shock absorber around the  
hard drive and PCB.  
Step 4  
Turn over the PCB and secure the  
hard drive to the PCB with the  
mounting screws that come with the  
kit.  
Step 5  
Mount the board to the bottom cover.  
Addonics Technologies – Jupiter Cipher ExDrive User’s Guide v1.0  
9
Step 6  
Put the top cover on by holding it in near  
vertical position and sliding the two  
metal clips inside the two small slots on  
the rear of the bottom cover.  
Step 7  
Lower the front of the top cover and  
making sure the two covers lined up  
properly. Tighten the small retaining  
screw on the front of the bottom cover  
to close the enclosure.  
Addonics Technologies – Jupiter Cipher ExDrive User’s Guide v1.0  
10  
Chapter 6  
Attaching USIB interface cable  
USIB connector for  
use with the  
Addonics USIB  
interface cable  
External power input  
jack (for use as external  
hard drive)  
Addonics USIB  
interface cable  
Be sure the Jupiter Cipher ExDrive key is inserted into the drive enclosure prior  
to turning on the power or attaching the USIB interface cable to the computer.  
Hard drive will not be detected if the interface cable is attached to the computer  
without the Cipher key inserted first. Under such condition, the power to the  
drive enclosure will have to be turned off and turned back on with the Cipher  
key already inserted into the drive enclosure in order for the hard drive to be  
detected by the system.  
The Jupiter Cipher ExDrive drive enclosure can be used as an internal  
removable hard drive or as a drive cartridge by installing the optional drive  
cradle into the drive bay of a Desktop, Server or any computing equipment.  
Addonics Technologies – Jupiter Cipher ExDrive User’s Guide v1.0  
11  
Chapter 7  
7.1  
USB2.0 USIB Cable (Model: AAUSBC-309)  
Note: USB Jupiter Cipher ExDrive is Plug and Play under Windows XP,  
2000 and 98Me. There is no third party driver needed.  
·
·
Since USB 2.0 Hi-Speed is an evolution of the existing USB 1.1  
specification, it is fully forward and backward compatible with current  
USB systems.  
If you do not have an USB2.0 port, you may install an optional USB2.0  
adapter or controller  
Driver Installation for Win98 and Win98SE  
Downloading the USB2.0 USIB Cable Driver from the Addonics Driver  
Disk  
1. Insert the Addonics Driver Disk in the CDROM drive. The Addonics  
Driver Disk window opens.  
2. Select Drivers > Interface Cables Drivers > USB2.0 Cable (AAUSBC-309)  
Win98/98SE Only.  
3. The Winzip Self-Extractor –AT2LP.exe window opens. Unzip file in My  
Documents.  
Addonics Technologies – Jupiter Cipher ExDrive User’s Guide v1.0  
12  
Driver Installation for Win98 and Win98SE  
1. Make sure your computer is up and running.  
2. Insert the USB2.0 USIB cable to the USB Port.  
3. A "New Hardware Found" message shall pop up, click Next.  
4. “What do you want Windows to do?” message opens. Select “Search for  
the best driver for your device,” click Next.  
5. “Specify Location” message opens. Point to the location of C:\My  
Documents\mass_storage_601where you unzip the files for the driver.  
Click Next.  
6. “Driver file search for the device %VID_ODBF&PID_0303%” then  
Building a driver database message opens. Let Windows finish the  
installation and click Finish.  
Disk Management for Windows 98  
1. Select Start > Setting > Control Panel > System. The System Properties  
window opens.  
2. Select the Device Manager tab, under Device type, Disk Drives, select your  
new hard drive. Click the Properties button.  
3. Select the Settings tab and under the Options box, click the Removable  
check box. The Reserved drive letters box becomes active. Select the drive  
letter for your new drive. Click Ok.  
4. Click Yes to restart your system to make changes take effect.  
5. Double click My Computer icon and there should be an extra drive letter  
for the Jupiter Cipher ExDrive drive. You may now access the drive.  
Addonics Technologies – Jupiter Cipher ExDrive User’s Guide v1.0  
13  
7.2  
SATA USIB Cable (Model: AASAC-605)  
For Win98SE, Me, 2000 and XP  
Note: There are no drivers needed to use the Serial ATA cable as long as the  
drivers are installed for the Serial ATA Controller card/chip. It is plug and  
play.  
Disk Management for Windows 98  
Note: Refer to the SATARAID Management Utility Manual  
SATARAID Manual V1.30 (for non-RAID5 Controllers) found in the  
Addonics Technologies website  
Addonics Technologies – Jupiter Cipher ExDrive User’s Guide v1.0  
14  
7.3  
FIREWIRE USIB Cable (Model: AAFWC-406)  
Note: Firewire Jupiter Cipher ExDrive is Plug and Play under Windows XP,  
2000 and 98Me. There is no third party driver needed.  
Driver Installation for Win98 and Win98SE  
After plugging in the cable some system might prompt you for Win98SE CD,  
in case you don’t have the Win98SE CD and the wizard prompts you for:  
NTMAP.SYS please type C:\WINDOWS\SYSTEM32\DRIVERS  
NTMAPHLP.PDR please type C:\WINDOWS\SYSTEM\IOSUBSYS  
Reboot your system.  
Disk Management for Window 98  
1. Select Start > Setting > Control Panel > System. The System Properties  
window opens.  
2. Select the Device Manager tab, under Device type, Disk Drives, select QTS  
FIREWIRE CABLE. Click the Properties button.  
3. Select the Settings tab and under the Options box, click the Removable  
check box. The Reserved drive letters box becomes active. Select the drive  
letter for your new drive. Click Ok.  
4. Click Yes to restart your system to make changes take effect.  
5. Double click My Computer icon and there should be an extra drive letter  
for the Jupiter Cipher ExDrive drive. You may now access the drive.  
Addonics Technologies – Jupiter Cipher ExDrive User’s Guide v1.0  
15  
For Windows 2000 & XP Operating Systems  
How to use Disk Management  
To start Disk Management:  
1. Log on as administrator or as a member of the Administrators group.  
2. Click Start, click Run, type compmgmt.msc, and then click OK. In the  
console tree, click Disk Management. The Disk Management window  
appears. Your disks and volumes appear in a graphical view and list view.  
3. To customize how you view your disks and volumes in the upper and lower  
panes of the window, point to Top or Bottom on the View menu, and then  
click the view that you want to use  
How to create a new partition or a new logical drive  
To create a new partition or logical drive on a basic disk:  
1. In the Disk Management window, complete one of the following  
procedures, and then continue to step 2:  
·
To create a new partition, right-click unallocated space on the basic  
disk where you want to create the partition, and then click New  
Partition.  
·
To create a new logical drive in an extended partition, right-click free  
space on an extended partition where you want to create the logical  
drive, and then click New Logical Drive.  
2. In the New Partition Wizard, click Next.  
3. Click the type of partition that you want to create (either Primary  
partition, Extended partition, or Logical drive), and then click Next.  
4. Specify the size of the partition in the Partition size in MB box, and then  
click Next.  
5. Decide whether to manually assign a drive letter, let the system  
automatically enumerate the drive, or do not assign a drive letter to the  
new partition or logical drive, and then click Next.  
6. Specify the formatting options you want to use by using one of the  
following procedures:  
·
If you do not want to format the partition, click Do not format this  
partition, and then click Next.  
·
If you want to format the partition, click Format this partition with  
the following settings, and then complete the following procedure in  
the Format dialog box:  
a. Type a name for the volume in the Volume label box. This is an  
optional step. Click the file system that you want to use in the File  
system box.  
b. You can change the disk allocation unit size, and then specify  
whether to perform a quick format, or enable file and folder  
compression on NTFS volumes.  
Click Next.  
Addonics Technologies – Jupiter Cipher ExDrive User’s Guide v1.0  
16  
7. Confirm that the options that selected are correct, and then click Finish.  
The new partition or logical drive is created and appears in the appropriate  
basic disk in the Disk Management window. If you chose to format the volume  
in step 6, the format process now starts.  
How to format a basic volume  
To format a partition, logical drive or basic volume:  
1. In the Disk Management window, right-click the partition or logical drive  
that you want to format (or reformat), and then click Format.  
2. In the Format dialog box, type a name for the volume in the Volume label  
box. This is an optional step.  
3. Click the file system that you want to use in the File system box. If you  
want, you can also change the disk allocation unit size, specify whether you  
want to perform a quick format, or enable file and folder compression on  
NTFS volumes.  
4. Click OK.  
5. Click OK when you are prompted to format the volume. The format  
process starts.  
Addonics Technologies – Jupiter Cipher ExDrive User’s Guide v1.0  
17  
Technical Support  
If you need assistance to get your unit functioning properly, please call  
Addonics Technical Support. Our technical staff will be happy to assist you,  
but they will need your help to do so. Calling the technical support staff  
without all the proper information can be both time consuming and frustrating.  
Here are some tips to help you out:  
(1)  
(2)  
(3)  
(4)  
MODEL NUMBER – Please have this number on hand.  
SYSTEM INFORMATION – Type of computer, peripherals, etc.  
OPERATING SYSTEM – What version of Windows  
WHAT’S THE TROUBLE? – Give enough information  
About your problem so that we can recreate and diagnose it.  
FREE Software Drivers for all Addonics Technologies  
Products are available 24 hours per day at the  
World Wide Web Site: www.addonics.com.  
Contact Information  
Addonics Technologies  
2466 Kruse Drive  
San Jose CA, 95131  
Phone:  
Fax:  
408-433-3899  
408-433-3898  
Email:  
Internet:  
TECHNICAL SUPPORT  
Phone:  
Hours:  
Email:  
408-433-3855  
9:00-6:00 PST  
Addonics Technologies – Jupiter Cipher ExDrive User’s Guide v1.0  
18  

Garland SEM 100D1 User Manual
Fortinet FortiGate 60c Security Appliance 60c User Manual
Euro Pro TO285 N User Manual
EnGenius Technologies DURAFON 1X User Manual
Electrolux SG 320 User Manual
Electrolux 260723 User Manual
Daewoo D W X 28W, D W F 28W, D T F 29, D T P 25, D T P 28 User Manual
Daewoo d Color Television 20V1FSPN DTQ 14V5FSPN User Manual
Akai PDP4273M User Manual
Acnodes KDS 6190 User Manual