Addonics Technologies JCCHDIS64 User Manual

Addonics  
T E C H N O L O G I E S  
Jupiter Cipher Combo Hard Drive  
For the following models:  
JCCHDIU64, JCCHDIF64, JCCHDIS64  
JCCHDIU128, JCCHDIF128, JCCHDIS128  
User’s Guide  
Version 1.0  
Contents  
FCC Warning...................................................................................1  
Limited Warranty............................................................................ 1  
Contents............................................................................................ 2  
Chapter 1 General Information .........................................................3  
Features............................................................................ 3  
Jupiter Cipher Combo Hard Drive models ........................ 4  
Chapter 2 Jupiter Cipher Combo Hard Drive key.............................. 5  
Chapter 3 Keeping track of the hard drive.........................................6  
Chapter 4 Jumper Setting for Jupiter Cipher Combo Hard Drive.......7  
Chapter 5 Hardware Installation Guide ........................................8-10  
Jupiter Combo Hard Drive ........................................ 11-13  
Optional Hardware ...................................................14-15  
Chapter 6 Attaching USIB Interface Cable ..................................... 16  
Chapter 7 USB2.0 USIB Interface Cable Driver Installation ...... 17-18  
Serial ATA USIB Interface Cable Driver Installation .... 19  
Firewire USIB Interface Cable Driver Installation ......... 20  
How to use Disk Management ...................................21-22  
Technical Support & Contact Information................................ …23  
Addonics Technologies – Jupiter Cipher Combo Hard Drive User Guide v1.0 2  
Chapter 1  
General Information  
The Addonics Technologies Jupiter Cipher Combo Hard Drive is a portable  
2.5” Hard Disk Drive kit. It consists of the Jupiter Cipher ExDrive and IDE  
drive cradle.  
Features  
·
·
·
·
·
·
·
Stylished and rugged black anodized aluminum housing  
Compact size and light weight  
Shock proof - up to 3 feet drop damage protection for the hard drive  
Easy hard drive installation  
Choice of standard or encryption drive enclosure  
The most versatile hard drive kit in the market  
Connect as an External Hard drive to any computer via USB2.0, CardBus,  
Firewire/iLink and Serial ATA port (only one of these cables is included in  
Turn any 2.5” hard drives into external hard drive or removable hard drive  
Use as a removable Hard Drive on Desktops PC  
·
·
·
Plug & Play Operation under Windows 98SE, Me, 2000, XP and 2003  
Server  
·
Portable: Enclosure fits any Briefcase or Notebook PC Case.  
Encryption  
·
·
Hardware based 64-bit DES or 128-bit TDES full disk encryption  
High performance - Data is encrypted and decrypted on the fly by a  
certified cryptographic engine inside an ASIC without taking any CPU  
resources  
·
·
·
Encryption / Decryption via a hardware key, just like using a regular key to  
open a door.  
Simple to deploy with no training required, no software to install and no  
password to remember  
Platform independency - There is no software or driver to install to use  
Addonics encryption products. As a result, it can be deployed in any  
systems running any OS. This is important in organization with multi  
platform computing and legacy systems.  
Addonics Technologies – Jupiter Cipher Combo Hard Drive User Guide v1.0 3  
Jupiter Cipher Combo Hard Drive  
Item Number Product Description  
JCCHDIU64  
JCCHDIF64  
JCCHDIS64  
Jupiter Cipher 64-bit Combo Hard Drive USB 2.0 for 2.5”  
IDE hard drive  
Jupiter Cipher 64-bit Combo Hard Drive Firewire/iLink for  
2.5” IDE hard drive  
Jupiter Cipher 64-bit Combo Hard Drive SATA for 2.5”  
IDE hard drive  
JCCHDIU128 Jupiter Cipher 128-bit Combo Hard Drive USB 2.0 for 2.5”  
IDE hard drive  
JCCHDIF128 Jupiter Cipher 128-bit Combo Hard Drive Firewire/iLink  
for 2.5” IDE hard drive  
JCCHDIS128 Jupiter Cipher 128-bit Combo Hard Drive SATA for 2.5”  
IDE hard drive  
Addonics Technologies – Jupiter Cipher Combo Hard Drive User Guide v1.0 4  
Chapter 2  
Jupiter Cipher Combo Hard Drive key  
Check to make sure you have the correct version of Jupiter Cipher Combo Hard  
Drive key. The key should match the label at the bottom of the drive enclosure.  
Yellow label DES-64  
Green label TDES-128  
stands for Jupiter Cipher  
stands for Jupiter Cipher  
Combo Hard Drive 64-bit  
Combo Hard Drive 128-bit  
key  
key  
IMPORTANT  
There is no back door for the Jupiter Cipher Combo Hard Drive encrypted  
hard drive if the key is lost or stolen.  
To ensure that there is a spare key, your Jupiter Cipher Combo Hard Drive  
bundled kit comes with one pair of Jupiter Cipher Combo Hard Drive keys.  
These 2 keys have identical encryption code. One of these keys should be kept  
in a safe and secure location and can be sent back to Addonics for duplicating  
additional keys. If you are down to the last key, be sure to make a back up of all  
the data stored inside your encrypted hard drive prior to sending the last key to  
Addonics. Addonics is not responsible for key lost in the mail or retrieval of the  
data inside the encrypted hard drive.  
Ø
Ø
Ø
The CIPHER key MUST be inserted at the front of the drive enclosure  
in order for the drive to be ACTIVATED.  
Once the drive is INITIALIZED using the Cipher Key that comes with  
the kit, the drive can only be accessed by the original key.  
The 2 keys that come with each Jupiter Cipher Combo Hard Drive  
bundled kit has their own unique encryption code. So the keys among  
different kits are not interchangeable.  
If you have multiple sets of Jupiter Cipher Combo Hard Drive kits and would  
like all the keys to have the same encryption code, you may make this request at  
the time of your order or mail the keys together with master key back to  
Addonics to recode them for you. Again be sure that you keep a spare key with  
you. Make a back up of your data if you are mailing in your last key.  
Addonics Technologies – Jupiter Cipher Combo Hard Drive User Guide v1.0 5  
Chapter 3  
Keeping track of the hard drive  
If you are using the Jupiter Cipher Combo Hard Drive enclosure to encrypt  
multiple hard drives, it is important to label your hard drive if you are taking  
the drive out of the enclosure. The hard drive with Jupiter Cipher Combo Hard  
Drive encryption will look like a brand new drive when attach directly to the  
IDE or SATA controller of a computer. There will be no partition or any hint to  
indicate that the drive contains encrypted data. When the drive is partitioned,  
all the encrypted data will be lost.  
The same holds true if a hard drive already has data on it is installed into the  
Jupiter Cipher Combo Hard Drive enclosure. The computer detects the hard  
drive as a brand new drive or a drive that is unallocated. Once you proceed to  
partition the drive, the data that was on the hard drive will be erased and  
cannot be recovered.  
A Jupiter Cipher Combo Hard Drive encrypted hard drive can be moved to  
another Jupiter Cipher Combo Hard Drive enclosure. But the same key used in  
encrypting the hard drive must be used in the new drive enclosure in order to  
access the drive.  
If you are installing multiple Jupiter Cipher Combo Hard Drive kits into a  
large organization, it is important to keep track of the drive and the  
encryption key. Once it gets mixed up, there is no possible way to recover  
the data on the encrypted hard drive.  
Addonics Technologies – Jupiter Cipher Combo Hard Drive User Guide v1.0 6  
Chapter 4  
Jumper Settings Inside the Jupiter Cipher Combo Hard Drive  
Settings when Jupiter ExDrive is used as an External Enclosure  
1. If the Jupiter ExDrive will be used externally with the external AC adapter,  
the switch from the case must be switch to the right, labeled EXT to grab  
power from external power supply.  
Application: Jupiter ExDrive can be set to receive power EXT and be used  
with all three types of USIB cables: USB2.0 USIB, Firewire USIB & SATA  
USIB  
2. If the Jupiter ExDrive will be used externally without the external AC  
adapter, the switch from the case must be switch to the left, labeled INT to  
grab power from system.  
Application: Jupiter ExDrive can be set to receive power INT and be used with  
the following types of USIB cables: USB2.0 USIB & Firewire USIB  
Note: We recommend setting the hard drive to MASTER mode/setting at all  
times. (Default setting)  
J4 Pin Definition for Master Setting  
Hard Drive Brand  
Hitachi  
J4 Jumper Setting  
Pin 1~6 Open  
NEC  
Fujitsu  
Toshiba  
Seagate  
J1 Pin Definition for USIB Interface  
Hard Drive Setting J1 Jumper Setting  
Master  
Pin 3 - Pin 5 Short  
Addonics Technologies – Jupiter Cipher Combo Hard Drive User Guide v1.0 7  
Chapter 5  
Hardware Installation Guide  
Exploded View of Enclosure shown with various components  
top cover  
2.5” hard drive  
shock  
absorbers  
switch  
PCB  
bottom cover  
screw  
cipher slot  
Step 1  
Separate the top from the bottom cover  
of the drive enclosure by loosening the  
screw as shown on the photo.  
Addonics Technologies – Jupiter Cipher Combo Hard Drive User Guide v1.0 8  
Step 2  
Align the male IDE connector on the  
2.5” hard drive with the female IDE  
connector on the PCB. Push the hard  
drive till the connector pins on the hard  
drive is fully seated inside the  
connector on the PCB.  
Step 3  
Wrap the shock absorber around the  
hard drive and PCB.  
Step 4  
Turn over the PCB and secure the  
hard drive to the PCB with the  
mounting screws that come with the  
kit.  
Step 5  
Mount the board to the bottom cover.  
Addonics Technologies – Jupiter Cipher Combo Hard Drive User Guide v1.0 9  
Step 6  
Put the top cover on by holding it in near  
vertical position and sliding the two  
metal clips inside the two small slots on  
the rear of the bottom cover.  
Step 7  
Lower the front of the top cover and  
making sure the two covers lined up  
properly. Tighten the small retaining  
screw on the front of the bottom cover  
to close the enclosure.  
Addonics Technologies – Jupiter Cipher Combo Hard Drive User Guide v1.0 10  
Jupiter Cipher Combo Hard Drive  
Note: Combo hard drive is the combination of Jupiter Cipher ExDrive kit and  
the IDE drive cradle.  
Allows a 2.5” Jupiter Cipher ExDrive to be used as an external hard drive and  
also be plug-in to a desktop computer internally. You may use an available 3.5”  
Floppy bay like the image shown below to install the Jupiter Cipher ExDrive  
cradle. If none is available you can mount one to a 5.25 bay with mounting  
brackets to fit the bay.  
Jupiter Cipher ExDrive is used as External Enclosure  
USIB Interface  
Cable  
Jupiter Cipher  
ExDrive  
External power  
input jack (for  
use as external  
Note: Use the jumper settings in chapter 4 for the above configuration  
Addonics Technologies – Jupiter Cipher Combo Hard Drive User Guide v1.0 11  
Jupiter Cipher ExDrive is used as an Internal Enclosure  
40 Pin IDE  
Connector  
Power Socket  
MC-36 Pin  
Connector  
Note: Use the jumper settings on the next page for the above configuration  
Addonics Technologies – Jupiter Cipher Combo Hard Drive User Guide v1.0 12  
Configuration:  
Jupiter Cipher ExDrive enclosure is placed inside IDE drive cardle. IDE  
drive cradle is connected to the IDE Controller on the mainboard with an  
IDE cable.  
A. Jupiter Cipher ExDrive is set to MASTER  
Hard Drive  
Brand  
J4 Jumper Setting  
Hitachi  
NEC  
Pin 1~6 Open  
Fujitsu  
Toshiba  
Seagate  
Hard Drive  
Setting  
J1 Jumper Setting  
Master  
Pin 1 – Pin 3 Short  
Pin 2 – Pin 4 Short  
Since the Jupiter Mobile Rack will be used internally without external AC  
adapter, the switch from the case must be switch to the left, labeled INT to grab  
power from system.  
Addonics Technologies – Jupiter Cipher Combo Hard Drive User Guide v1.0 13  
Optional Hardware  
A.  
SATA Cartridge Cradle System  
4-pin Molex  
power connector  
for PC power  
2-pin connector on the  
IDE to SATA converter  
board  
2-pin connector on  
the PCB board  
IDE to SATA  
converter  
SATA connector  
For Win98SE, Me, 2000 and XP  
Note: There are no drivers needed to use the Serial ATA cable as long as the  
drivers are installed for the Serial ATA Controller card/chip. It is plug and  
play.  
Hot Swap using Serial ATA connection is supported only on host controller  
using Silicon Image chipset.  
Disk Management for Windows 98  
Note: Refer to the SATARAID Management Utility Manual  
SATARAID Manual V1.30 (for non-RAID5 Controllers) found in the  
Addonics Technologies website  
B.  
USB 2.0/1.1 Cartridge Cradle System  
4-pin Molex  
power connector  
for PC power  
2-pin connector on the  
IDE to USB converter  
board  
2-pin connector on  
the PCB board  
IDE to USB2.0  
converter  
USB connector  
Note: The Hot Swap feature for the above configurations is enabled by the  
connection of the power cable connected to the 2-pin connector on the PCB  
board on the cradle and the 2-pin connector on the IDE to SATA or IDE to  
USB converter boards. With this feature you can remove the Jupiter Cipher  
ExDrive from the cradle without shutting down the system.  
Addonics Technologies – Jupiter Cipher Combo Hard Drive User Guide v1.0 14  
Jumper Settings for Internal Cartridge Cradle System  
Jupiter Cipher ExDrive is set to MASTER  
Hard Drive  
Brand  
J4 Jumper  
Setting  
Hitachi  
NEC  
Pin 1~6 Open  
Fujitsu  
Toshiba  
Seagate  
Hard Drive  
Setting  
J1 Jumper  
Setting  
Master  
Pin 1 – Pin 3 Short  
Pin 2 – Pin 4 Short  
Addonics Technologies – Jupiter Cipher Combo Hard Drive User Guide v1.0 15  
Chapter 6  
Attaching USIB interface cable  
USIB connector for  
use with the  
Addonics USIB  
interface cable  
External power input  
jack (for use as external  
hard drive)  
Addonics USIB  
interface cable  
Addonics Technologies – Jupiter Cipher Combo Hard Drive User Guide v1.0 16  
Chapter 7  
7.1  
USB2.0 USIB Cable (Model: AAUSBC-309)  
Note: USB Jupiter ExDrive is Plug and Play under Windows XP, 2000 and  
98Me. There is no third party driver needed.  
·
·
Since USB 2.0 Hi-Speed is an evolution of the existing USB 1.1  
specification, it is fully forward and backward compatible with current  
USB systems.  
If you do not have an USB2.0 port, you may install an optional USB2.0  
adapter or controller  
Driver Installation for Win98 and Win98SE  
Downloading the USB2.0 USIB Cable Driver from the Addonics Driver  
Disk  
1. Insert the Addonics Driver Disk in the CDROM drive. The Addonics  
Driver Disk window opens.  
2. Select Drivers > Interface Cables Drivers > USB2.0 Cable (AAUSBC-309)  
Win98/98SE Only.  
3. The Winzip Self-Extractor –AT2LP.exe window opens. Unzip file in My  
Documents.  
Addonics Technologies – Jupiter Cipher Combo Hard Drive User Guide v1.0 17  
Driver Installation for Win98 and Win98SE  
1. Make sure your computer is up and running.  
2. Insert the USB2.0 USIB cable to the USB Port.  
3. A "New Hardware Found" message shall pop up, click Next.  
4. “What do you want Windows to do?” message opens. Select “Search for  
the best driver for your device,” click Next.  
5. “Specify Location” message opens. Point to the location of  
C:\mass_storage_601where you unzip the files for the driver. Click Next.  
6. “Driver file search for the device %VID_ODBF&PID_0303%” then  
Building a driver database message opens. Let Windows finish the  
installation and click Finish.  
Disk Management for Windows 98  
1. Select Start > Setting > Control Panel > System. The System Properties  
window opens.  
2. Select the Device Manager tab, under Device type, Disk Drives, select your  
new hard drive. Click the Properties button.  
3. Select the Settings tab and under the Options box, click the Removable  
check box. The Reserved drive letters box becomes active. Select the drive  
letter for your new drive. Click Ok.  
4. Click Yes to restart your system to make changes take effect.  
5. Double click My Computer icon and there should be an extra drive letter  
for the Jupiter ExDrive drive. You may now access the drive.  
Addonics Technologies – Jupiter Cipher Combo Hard Drive User Guide v1.0 18  
7.2  
SATA USIB Cable (Model: AASAC-605)  
For Win98SE, Me, 2000 and XP  
Note: There no drivers needed to use the Serial ATA cable as long as the  
drivers are installed for the Serial ATA Controller card/chip. It is plug and  
play.  
Disk Management for Windows 98  
Note: Refer to the SATARAID Management Utility Manual  
SATARAID Manual V1.30 (for non-RAID5 Controllers) found in the  
Addonics Technologies website  
Addonics Technologies – Jupiter Cipher Combo Hard Drive User Guide v1.0 19  
7.3  
FIREWIRE USIB Cable (Model: AAFWC-406)  
Note: Firewire Jupiter ExDrive is Plug and Play under Windows XP, 2000  
and 98Me. There is no third party driver needed.  
Driver Installation for Win98 and Win98SE  
After plugging in the cable some system might prompt you for Win98SE CD,  
in case you don’t have The Win98SE CD and the wizard prompt you for:  
NTMAP.SYS please type C:\WINDOWS\SYSTEM32\DRIVERS  
NTMAPHLP.PDR please type C:\WINDOWS\SYSTEM\IOSUBSYS  
Reboot your system.  
Disk Management for Window 98  
1. Select Start > Setting > Control Panel > System. The System Properties  
window opens.  
2. Select the Device Manager tab, under Device type, Disk Drives, select QTS  
FIREWIRE CABLE. Click the Properties button.  
3. Select the Settings tab and under the Options box, click the Removable  
check box. The Reserved drive letters box becomes active. Select the drive  
letter for your new drive. Click Ok.  
4. Click Yes to restart your system to make changes take effect.  
5. Double click My Computer icon and there should be an extra drive letter  
for the Jupiter ExDrive drive. You may now access the drive.  
Addonics Technologies – Jupiter Cipher Combo Hard Drive User Guide v1.0 20  
For Windows 2000 & XP Operating Systems  
How to use Disk Management  
To start Disk Management:  
1. Log on as administrator or as a member of the Administrators group.  
2. Click Start, click Run, type compmgmt.msc, and then click OK. In the  
console tree, click Disk Management. The Disk Management window  
appears. Your disks and volumes appear in a graphical view and list view.  
3. To customize how you view your disks and volumes in the upper and lower  
panes of the window, point to Top or Bottom on the View menu, and then  
click the view that you want to use  
How to create a new partition or a new logical drive  
To create a new partition or logical drive on a basic disk:  
1. In the Disk Management window, complete one of the following  
procedures, and then continue to step 2:  
·
To create a new partition, right-click unallocated space on the basic  
disk where you want to create the partition, and then click New  
Partition.  
·
To create a new logical drive in an extended partition, right-click free  
space on an extended partition where you want to create the logical  
drive, and then click New Logical Drive.  
2. In the New Partition Wizard, click Next.  
3. Click the type of partition that you want to create (either Primary  
partition, Extended partition, or Logical drive), and then click Next.  
4. Specify the size of the partition in the Partition size in MB box, and then  
click Next.  
5. Decide whether to manually assign a drive letter, let the system  
automatically enumerate the drive, or do not assign a drive letter to the  
new partition or logical drive, and then click Next  
6. Specify the formatting options you want to use by using one of the  
following procedures:  
·
If you do not want to format the partition, click Do not format this  
partition, and then click Next.  
·
If you want to format the partition, click Format this partition with  
the following settings, and then complete the following procedure in  
the Format dialog box:  
a. Type a name for the volume in the Volume label box. This is an  
optional step. Click the file system that you want to use in the File  
system box.  
b. You can change the disk allocation unit size, and then specify  
whether to perform a quick format, or enable file and folder  
compression on NTFS volumes.  
Click Next.  
Addonics Technologies – Jupiter Cipher Combo Hard Drive User Guide v1.0 21  
7. Confirm that the options that selected are correct, and then click Finish.  
The new partition or logical drive is created and appears in the appropriate  
basic disk in the Disk Management window. If you chose to format the volume  
in step 6, the format process now starts.  
How to format a basic volume  
To format a partition, logical drive or basic volume:  
1. In the Disk Management window, right-click the partition or logical drive  
that you want to format (or reformat), and then click Format.  
2. In the Format dialog box, type a name for the volume in the Volume label  
box. This is an optional step.  
3. Click the file system that you want to use in the File system box. If you  
want, you can also change the disk allocation unit size, specify whether you  
want to perform a quick format, or enable file and folder compression on  
NTFS volumes.  
4. Click OK.  
5. Click OK when you are prompted to format the volume. The format  
process starts.  
Addonics Technologies – Jupiter Cipher Combo Hard Drive User Guide v1.0 22  
Technical Support  
If you need assistance to get your unit functioning properly, please call  
Addonics Technical Support. Our technical staff will be happy to assist you,  
but they will need your help to do so. Calling the technical support staff  
without all the proper information can be both time consuming and frustrating.  
Here are some tips to help you out:  
(1)  
(2)  
(3)  
(4)  
MODEL NUMBER – Please have this number on hand.  
SYSTEM INFORMATION – Type of computer, peripherals, etc.  
OPERATING SYSTEM – What version of Windows  
WHAT’S THE TROUBLE? – Give enough information  
About your problem so that we can recreate and diagnose it.  
FREE Software Drivers for all Addonics Technologies  
Products are available 24 hours per day at the  
World Wide Web Site: www.addonics.com.  
Contact Information  
Addonics Technologies  
2466 Kruse Drive  
San Jose CA, 95131  
Phone:  
Fax:  
408-433-3899  
408-433-3898  
Email:  
Internet:  
TECHNICAL SUPPORT  
Phone:  
Hours:  
Email:  
408-433-3855  
8-5 PST  
Addonics Technologies – Jupiter Cipher Combo Hard Drive User Guide v1.0 23  

Hitachi UltraVision UWX Series 61UWX10B User Manual
Frigidaire FFEC3205LW User Manual
Elo TouchSystems AMM15TK2 TEW User Manual
Electrolux EHG 770 User Manual
Dell Computer Monitor E2210H User Manual
Clarity XLC Cordless 3 5HS User Manual
BT 500 User Manual
Audiovox VOD702 User Manual
AT T CL81109 User Manual
Asus Motherboard P9D C 90SB0330M0UAY0 User Manual