Addonics Technologies CCHESEXC34 User Manual

ADDONICS TECHNOLOGIES  
Model: CCHESEXC34  
Installation Guide  
Operating the CipherChain Expresscard:  
I. Cipher mode  
Cipher switch is in ON position.  
1. Insert AES 256-bit cipher key on the cipher keyhole.  
2. Press cipher switch using a pen tip or equivalent to ON  
position to enable encryption.  
3. Insert CipherChain Expresscard to ExpressCard slot.  
4. Attached an eSATA storage device to the hybrid eSATA  
port. Observe that both Cipher HDD & Cipher key LEDs  
light up. If it does not, remove the CipherChain  
Expresscard, reseat the cipher key and re-insert the  
CipherChain Expresscard to ExpressCard slot.  
5. For new drive, go to the operating system’s  
management utility to partition, format and mount the  
encrypted drive.  
Cipher keyhole  
Hybrid eSATA  
Port  
6. Go to File Manager and view the encrypted drive.  
Cipher switch  
Note: Once the encrypted drive is partitioned and formatted,  
a drive letter should appear in My Computer. The eSATA  
drive will function just like any external hard drive. Data  
written to the drive will be instantly encrypted and data will  
also be automatically decrypted when it is read or  
transferred out of the drive.  
LEDs  
II. Non-Cipher mode  
Operating  
Mode  
Standard Cipher  
Cipher  
key  
LED  
Compatible  
device  
Cipher switch is in OFF position.  
1. Press cipher switch using a pen tip or equivalent to OFF  
position to disable encryption.  
2. Insert CipherChain Expresscard to ExpressCard slot.  
3. Attached an eSATA storage device to the hybrid eSATA  
port. Observe that standard HDD LED lights up. If it  
does not, remove the CipherChain Expresscard and re-  
insert back to ExpressCard slot.  
HDD  
LED  
HDD  
LED  
Cipher mode  
(cipher switch OFF  
is ON)  
Encrypted  
eSATA HDD /  
SSD  
ON  
ON  
Non-Cipher  
Standard  
mode (cipher  
switch is  
OFF)  
USB mode  
(no  
eSATA HDD /  
SDD / optical  
drive  
Standard USB  
HDD / SDD /  
optical drive  
ON  
OFF  
OFF  
4. For drive with data on it, go to File Manager and view  
the drive.  
OFF  
OFF  
OFF  
encryption)  
Note: Encrypted drive will appear as brand new drive in non-  
Cipher mode.  
Adding the CipherChain ExpressCard to an existing  
Windows system  
III. USB2.0 mode  
1. Insert card to ExpressCard slot.  
2. Attached a USB storage device to the hybrid eSATA  
port.  
Driver Installation:  
1. Insert AES 256-bit cipher key on the cipher keyhole.  
2. Press cipher switch using a pen tip or equivalent to ON  
position to enable encryption.  
3. The system should detect an additional drive.  
3. Insert CipherChain Expresscard to ExpressCard slot.  
4. Attached an eSATA storage device to the hybrid eSATA  
port. This is required to power on the CipherChain  
Expresscard.  
5. “Found New Hardware Wizard” opens. Follow wizard to  
update driver and navigate to the driver folder where the  
driver file is located.  
6. In cases where the “Found New Hardware Wizard” does  
not display, try to locate unknown Mass Storage  
Controller in Device Manager. Highlight and right click  
on the Mass Storage Controller then select Update  
driver. Navigate to the driver folder where the driver file  
is located.  
Note: You may remove the cipher key from the CipherChain  
Expresscard once it is powered on. All the files being  
transferred into the drive are still encrypted even if the cipher  
key is removed.  
CipherChain Expresscard will be turned off whenever the  
eSATA cable is removed. This will remove the hard drive  
from the system and clear the cipher code.  
Best Practices:  
Create a label to identify the eSATA storage device and  
the Cipher key used to encrypt the device.  
Always keep a spare master key in a safe place.  
7. After driver installation, restart the system.  
TECHNICAL SUPPORT  
Confirming Driver Installation  
1. Right click the My Computer icon and select Manage.  
2. Click Device Manager in the Menu Tree.  
3. Click the “+” sign in front of SCSI and RAID Controllers.  
You should see Silicon Image SiI 3531 SATA  
Controller.  
Technical Support (8:30 am to 6:00 pm PST)  
Phone:  
Email:  
408 453-6212  

Gigabyte GA K8VT800 User Manual
GE ZGU36 User Manual
GE ZEU769 User Manual
EverFocus EN1080P26A User Manual
Elo TouchSystems ET1529L User Manual
Cypress CY7C138 User Manual
Cypress CY7C107B User Manual
Black Box Computer Hardware LEH1008A 2MMSC User Manual
Asus Motherboard P5RD1 V User Manual
Abit NI8 SLI User Manual