Acer X221W User Manual

Table of Contents  
Precautions.......................................................................................................2  
Special notes on LCD monitors........................................................................2  
Package contents .............................................................................................3  
Installation instructions ...................................................................................3  
Assembling the monitor ..............................................................................3  
Adjusting the viewing angle........................................................................4  
Connecting the devices................................................................................5  
Switching the power....................................................................................6  
Adjusting display settings................................................................................6  
External controls...........................................................................................6  
OSD options......................................................................................................7  
OSD menu.....................................................................................................7  
Troubleshooting.............................................................................................10  
General specifications....................................................................................11  
1
Package contents  
LCD monitor  
Power cord  
Audio cable  
VGA cable  
(Optional)  
DVI cable  
User's Guide (CD)  
Quick Start Guide  
(Optional)  
Installation instructions  
Assembling the monitor  
1.  
Position the monitor on top of the base.  
2.  
Connect the base into the neck of the monitor  
along the track.  
Detaching the monitor  
If you need to detach the monitor for repackaging, the monitor and base must be separated in order to fit  
in the carton.  
To detach the monitor:  
1.  
2.  
3.  
Unplug the AC power cord to make sure the power is off.  
Pull the 4 hooks on the bottom side of the base and hold.  
Separate the monitor and base.  
Important  
When separating the monitor and base, find a clean, flat surface to place the monitor on and place a clean  
dry cloth under the monitor to protect it further. After removing the monitor from the base, pull the  
monitor slightly up and away from the base and place it on the cloth.  
3
Adjusting the viewing angle  
The viewing angle of the monitor ranges from -5 – 20°.  
NOTES  
Do not touch the LCD screen when you change the angle. It may cause damage or break the LCD screen.  
Careful attention is required not to catch your fingers or hands when you change the angle.  
4
Connecting the devices  
Caution: Make sure that the computer and the monitor are both disconnected from the power  
supply.  
Attach the monitor to the power cord, and then insert the power cord into a  
properly grounded electrical socket.  
1
2
3
4
Power cord  
VGA cable  
Connect the signal cable to the VGA input socket of the monitor, and connect the  
signal cable to the VGA output socket of the graphics card on the computer. Then  
tighten the thumbscrews on the connector.  
Connect the signal cable to the DVI-D input socket of the monitor, and connect the  
signal cable to the DVI-D output socket of the graphics card on the computer. Then  
tighten the thumbscrews on the connector.  
DVI-D cable  
(Optional)  
Audio cable Connect the audio input socket (AUDIO IN) of the LCD monitor and the computer  
(Optional)  
by means of the audio cable.  
WARNING!  
Check the VGA card of your computer. Make sure the shape of the plug matches the shape of  
the socket it is inserted into. Also check that none of the pins are bent or otherwise damaged.  
VGA  
DVI-D  
5
Switching the power  
First, switch on the hard-switch on the backside of monitor, then turn on PC and power button on  
monitor’s control panel. When you see the LED on the power button go green, this indicates the computer  
is ready for use. Allow about 10 seconds for the video signal to appear. If you do not see the green light  
on the power button or a video signal, check the connections.  
Adjusting display settings  
External controls  
If the OSD is active, press Auto to exit a selection in the OSD. If the OSD is  
inactive, press Auto and the monitor will automatically optimize the  
position, focus, and clock of your display.  
1
Auto  
If the OSD is active, press Minus or Plus to toggle between the OSD  
options. If OSD is inactive, press Minus or Plus to adjust the volume.  
2/3  
Minus / Plus  
</>  
OSD  
functions  
4
5
Press to view the OSD. Press again to enter a selection in the OSD.  
Power on/off  
Power  
Green: power on  
Orange: in sleep mode  
6
OSD options  
Please refer to "External controls" on Page 6.  
To adjust the OSD settings:  
1.  
Press the Menu button to open the OSD menu.  
2.  
Use Plus/Minus buttons to toggle between the 10 OSD functions (and also to adjust the controls to  
desired levels once a function has been selected).  
3.  
4.  
Press Menu again to select one of the 10 OSD functions.  
When you have finished adjusting the OSD settings, press the Auto button to exit the OSD.  
OSD menu  
Contrast:  
This adjusts dark and light shades of color relative to each  
other.  
Brightness:  
This adjusts the brightness of the picture on the screen.  
Focus:  
This removes any horizontal distortion and makes the picture  
clear and sharp.  
Clock:  
If there are any vertical stripes seen on the background of the  
screen, this renders them less noticeable by minimizing their  
size. It also changes the size of the horizontal screen.  
H-Position:  
This adjusts the horizontal.  
V-Position:  
This adjusts the vertical.  
7
Color adjustment:  
There are three ways to adjust color:  
Warm (reddish white)  
Cool (bluish white)  
User (you can adjust the colors red, green and blue to the  
intensity you desire)  
Language for Asia:  
Select the OSD menu language. Select from English, German,  
Spanish, Simplified Chinese, Traditional Chinese, French,  
Italian, and Japanese.  
Language for EMEA:  
Select the OSD menu language. Select from English, German,  
Spanish, Russia, Nederlands, French, Italian, and Finnish.  
OSD Settings:  
This changes the position of the OSD window on the screen and  
the staying time.  
8
Auto Config:  
System runs auto-configuration.  
(Optional)  
Input signal:  
Select either Analog Input or Digital Input video.  
Information:  
This shows information about the screen.  
Reset:  
Resets all settings to default levels.  
Exit:  
Exit from OSD.  
9
Troubleshooting  
Problem  
Possible Solutions  
Power LED is not ON  
y
y
Check to see if the power switch is in the ON position.  
Ensure that the Power Cord is connected.  
No picture  
y
y
y
Check to see if the power switch is in the ON position.  
Ensure that the power cord is connected.  
Ensure the video cable is securely connected to the back of the monitor  
and the computer.  
y
y
Move the mouse or press any key on the keyboard to bring the monitor  
out of "active off" mode.  
Picture shows  
See color adjustment (p. 8) to adjust RGB color.  
inappropriate colors  
Picture bounces or a  
wave pattern is  
present in the picture  
y
y
Move or switch off electrical devices that may be causing interference.  
Inspect the monitor's video cable and ensure that none of the pins are  
bent.  
Image is not sized or  
centered properly  
y
y
Press select/auto key and the monitor will automatically optimize the  
position of your display.  
See horizontal and vertical position adjustment (p. 7).  
Caution: Do not attempt to service or open the monitor or computer yourself. Please refer all  
servicing to qualified service personnel if the "Troubleshooting" section cannot solve your  
problems.  
10  
General specifications  
Item  
Specification  
LCD panel  
Display  
22-inch flat panel active-matrix TFT LCD  
Max resolution  
Pixel pitch  
Color  
WXGA+ 1680×1050 pixels  
0.282 mm  
16.7 M  
Brightness  
300 cd/m² (Typical)  
1000:1 (Typical)  
5ms (Typical)  
170°  
Contrast ratio  
Response time  
View angle of horizontal  
View angle of vertical  
External controls  
Power Button  
Control Buttons  
OSD Function  
Contrast/Brightness  
Focus/Clock  
160°  
ON/OFF  
Auto, menu, minus, plus  
Contrast/Brightness  
Focus/Clock  
Position  
Position  
Color  
Language  
Color  
Language  
OSD setting  
OSD Setting  
Auto config / Input signal Auto config / Input signal  
Information  
Reset  
Exit  
Information  
Reset  
Exit  
Video Interface  
Video  
Analog 0.7 V / Digital HDCP TMDS (Optional)  
Sync  
TTL (+ / -)  
Audio  
Plug & Play  
1.5 W x 2(Optional)  
DDC2B  
Power  
Power source  
AC 100V~240V 50 / 60 Hz  
Power consumption [Energy Star]  
On.  
Stand by  
OFF  
31.00W  
0.80W  
0.70W  
Power consumption  
Max.  
Stand by  
OFF  
44.00W  
0.80W  
0.70W  
Dimension and weight  
Dimensions (W×H×D)  
Weight (Net/Gross)  
513.8x417.7x203.8mm (with stand)  
5.2kg / 7.4 kg  
Lamp disposal  
Lamp(s) inside this product contain mercury and must be recycled or disposed of according to local, state  
or federal laws. For more information, contact the Electronic Industries Alliance at www.eiae.org. For  
lamp-specific disposal information, check www.lamprecycle.org.  
11  

HP Hewlett Packard Hewlett Packard Computer Monitor ZR2240W User Manual
GE PROFILE WPDH8900J User Manual
Fujitsu Computer Hardware C122 E177 01EN User Manual
Electrolux 922047 User Manual
Electrolux 922006 User Manual
Delta Tau 5xx 603869 xUxx User Manual
Cleveland Range Convotherm Combination Oven Steamer Electric 6 20 User Manual
Avaya B149 User Manual
Avaya 3720 User Manual
AMD Phenom AM2r2 User Manual