Acer LCD Monito User Manual

Table of Contents  
Precautions .....................................................................................................................2  
Package contents ............................................................................................................3  
Installation instructions.................................................................................................3  
Assembling the Monitor.....................................................................................................................3  
Detaching the Monitor .......................................................................................................................4  
Adjusting the Viewing Angle.............................................................................................................4  
Connecting the Devices......................................................................................................................5  
Switching the Power ..........................................................................................................................5  
Adjusting display settings..............................................................................................6  
External Controls ...............................................................................................................................6  
OSD options....................................................................................................................7  
OSD Menu .........................................................................................................................................7  
Troubleshooting .............................................................................................................9  
General specifications.......................................................................................10  
1
Package contents  
LCD Monitor  
Power Cord  
VGA Cable  
Audio Cable  
User Manual (CD)  
Quick Start Guide  
Installation instructions  
Assembling the Monitor  
1. Position the monitor on top of the stand.  
2. Connect the stand into the neck of the monitor  
along the track.  
3
Detaching the Monitor  
If you need to repackage the monitor, please separate the monitor and base, and restore them to  
the carton. To detach the monitor:  
1. Unplug the AC power cord to make sure the power is off.  
2. Pull the 4 hooks on bottom side of the base and hold.  
3. Separate the monitor and base and put them into carton.  
Important  
First, find a clean, flat surface to place the monitor after removing it from the stand. Place a clean  
dry cloth under the monitor to protect it further. Pull the monitor slightly up and away from the  
stand.  
Adjusting the Viewing Angle  
The viewing angle of the monitor ranges from 0°~20°.  
4
Connecting the Devices  
Caution: Make sure that the computer and the monitor are both disconnected from the  
power supply.  
AC IN  
AUDIOIN  
D-SUB IN  
2
VGA  
3
Audio  
1
3
1
AC  
2
VGA  
AC  
Audio  
c
d
Power Code  
VGA Cable  
Attach the monitor to the power cord which should then be inserted  
into a properly grounded electric socket.  
Connect the signal cable to the VGA input socket of the monitor , and  
connect the signal cable to the VGA output socket of the graphics card  
on the computer. Then tighten the thumbscrews on the connector.  
Connect the audio input socket of the LCD monitor and the computer  
by means of the audio cable.  
e
Audio cable  
WARNING: The D-Sub 15 pin plug of the VGA cable is trapezoid in shape. Make sure  
the shape of the plug matches the shape of the socket it is inserted into, and  
that none of the pins are bent or otherwise damaged.  
Switching the Power  
First, switch the power on to the monitor, then switch the power on to the computer. When you  
see the LED on the power button go green, this indicates the computer is ready for use. Allow  
about 10 seconds for the video signal to appear. If you do not see the green light on the power  
button or a video signal, check the connections.  
5
Adjusting display settings  
1 2  
5
3 4  
AUTO  
<
>
MENU  
External Controls  
If OSD is active, press to exit a selection in OSD. If OSD is  
inactive, press and the monitor will automatically optimize the  
position, focus and clock of your display.  
1
AUTO  
MINUS  
PLUS  
If OSD is active, press to select or adjust OSD options. If OSD is  
inactive, press once, then press the buttons marked < or > to adjust  
the volume.  
2
3
4
5
<
>
If OSD is active, press to select or adjust OSD options. If OSD is  
inactive, press once, then press the buttons marked < or > to adjust  
the volume.  
Press to view OSD.  
OSD  
Function  
Press again to enter a selection in OSD.  
Power on/off  
Green: power on  
Orange: in sleep mode  
POWER  
6
OSD options  
Please refer to "External Controls" on Page 6.  
To adjust the OSD settings:  
1. Press the MENU button to open the OSD menu. Press again to enter a selection of 10  
functions on OSD.  
2. Use the buttons marked < or >, to highlight a control, then adjust the control to the desired  
level.  
3. When you have finished making all selections, press the AUTO button to exit the OSD.  
OSD Menu  
Contrast:  
This adjusts dark and light shades of color relative to each other to  
achieve a comfortable contrast.  
Brightness:  
This adjusts the brightness of the picture on the screen.  
Focus:  
This removes any horizontal distortion and makes the picture clear and  
sharp.  
Clock:  
If there are any vertical stripes seen on the background of the screen this  
renders them less noticeable by minimizing their size. It also changes the  
size of the horizontal screen.  
H-Position:  
This adjusts the horizontal.  
V-Position:  
This adjusts the vertical.  
COLOR:  
There are three ways of adjusting color:  
Warm (Reddish white)  
Cool (Bluish white)  
User defined:  
You can adjust the colors red, green and blue to the intensity you desire.  
7
LANGUAGE:  
Select the OSD menu language from  
English, German, Spanish, Russian, Traditional Chinese, French, Italian,  
and Japanese.  
OSD SETTING:  
This changes the position of the OSD window on the screen and staying  
time.  
Auto Config:  
System runs auto-configuration.  
INFORMATION:  
This shows brief information on the screen.  
Reset:  
Recall to default settings.  
Exit:  
Exit from OSD.  
8
Troubleshooting  
Problems  
Possible Solutions  
Power LED is not  
ON  
Check to see if the power switch is in the ON position.  
Ensure that the Power Cord is connected.  
No Picture  
Check to see if the power switch is in the ON position.  
Ensure that the Power Cord is connected.  
Ensure the video cable is securely connected to the back of the monitor  
and the computer.  
Move the mouse or press any key on the keyboard to bring the monitor  
out of "active off" mode.  
Picture shows  
inappropriate colors  
See "Color Adjustment" to adjust RGB color or to select color  
temperature.  
Picture bounces or a  
wave pattern is  
present in the  
picture  
Move or switch off electrical devices that may be causing interference.  
Inspect the monitor's video cable and ensure that none of the pins are  
bent.  
Image is not sized  
or centered properly  
Press select/auto key and the monitor will automatically optimize the  
position of your display.  
See "Position adjustment".  
Caution: Do not attempt to service the monitor yourself or open the computer yourself.  
Please refer all servicing to qualified service personnel if the problems cannot  
be solved in "Troubleshooting" section.  
9
General specifications  
Item  
Specification  
LCD Panel  
Display  
19-inch Flat panel active-matrix TFT LCD  
Max resolution  
Pixel Pitch  
SXGA 1280×1024 pixels  
0.294 mm  
Color  
16.2M  
Brightness  
250 cd/m² (Typical)  
500:1 (Typical)  
12ms (Typical)  
140°  
Contrast Ratio  
Response Time  
View Angle of Horizontal  
View Angle of Vertical  
External Controls  
Power Button  
Control Buttons  
OSD Function  
Contrast /Brightness  
Focus/Clock  
Position  
140°  
ON / OFF  
Auto, <, >, MENU  
Contrast / Brightness  
Focus / Clock  
Position  
Color  
Color  
Language  
Language  
OSD Setting  
Auto config  
Information  
Reset  
OSD setting  
Auto config  
Information  
Reset  
Exit  
Exit  
Video Interface  
Video  
Analog 0.7V  
TTL (+ / -)  
1W x 2  
Sync  
Audio  
Plug & Play  
DDC2B  
Power  
Power Source  
Power consumption during  
normal operation  
100~240V AC, 50/60 Hz  
< 40W  
Power consumption during  
active off operation  
< 1W  
Dimension and Weight  
Dimension (W×H×D)  
422.2 × 433.7 × 181.9 mm (with stand)  
5.6 Kg / 7.6 Kg  
Weight (Net/ Gross)  
10  

HP Hewlett Packard Hewlett Packard Computer Drive 2 SP4 User Manual
Dell Professional P2210H User Manual1
Cypress CY8C22113 User Manual
Cuisinart IB 8099 User Manual
BT Domus User Manual
Avanti DW183W User Manual
AT T E2725B User Manual
Asus Computer Hardware P9X79 E User Manual
American Dynamics 15 and 17 inch CCTV User Manual
Amana AEZ8590 User Manual