Verilux VA02 User Manual

INSTRUCTION  
MANUAL  
Rise & Shine® Deluxe  
Natural Alarm Clock® Bedside Lamp  
VA02  
IMPORTANT SAFETY INSTRUCTIONS  
CAUTION:  
TO REDUCE THE RISK OF ELECTIC SHOCK, DO NOT REMOVE ANY  
COMPONENTS. THERE ARE NO SERVICEABLE PARTS INSIDE.  
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT  
EXPOSE THIS UNIT TO RAIN OR MOISTURE.  
The lightning flash with arrowhead symbol, within an  
equilateral triangle, is intended to alert the user to the  
presence of uninsulated dangerous voltage within the  
system enclosure that may be of sufficient magnitude to  
constitute a risk of electric shock.  
The exclamation point within an equilateral triangle,  
as marked on the system, is intended to alert the  
user to the presence of important operating and  
maintenance instructions in this installation guide.  
Batteries  
Please dispose of used batteries properly, following  
any local regulations.  
Do not incinerate.  
WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK  
OR PERSONAL INJURY:  
Turn off/unplug and allow to cool before replacing bulb, cleaning  
or other maintenance.  
• Light bulbs get HOT quickly! Do not touch the bulb while  
the lamp is on.  
• Do not look directly at the lighted bulb.  
• Do not operate the lamp in close proximity to flammable or  
combustible vapors, such as aerosol (spray) products or where  
oxygen is being administered.  
• Use only the type of bulb and maximum wattage indicated by the  
manufacturer.  
• Never cover the bulb when it is in operation.  
2
IMPORTANT SAFETY INSTRUCTIONS  
1. Read these instructions – before using this lamp.  
2. Keep these instructions – for future reference.  
3. Heed all warnings.  
4. Follow all instructions.  
5. Do not use this lamp in damp/humid or wet locations.  
6. For indoor use only.  
7. Clean only with dry cloth.  
8. Do not block any ventilation openings. Install in accordance with the  
manufacturer's instructions.  
9. Do not place near any heat sources such as radiators, heat registers,  
stoves, or other apparatus (including amplifiers)  
that produce heat.  
10. The lamp should be connected to a power supply (AC adapter) only of  
the type described in the operating instructions or as marked on the lamp  
and supplied with the lamp.  
11. Do not defeat the safety purpose of the polarized or grounding-type plug.  
A polarized plug has two blades with one wider than the other. A  
grounding-type plug has two blades and a third grounding prong. The  
wider blade or third prong is provided for your safety. If the provided plug  
does not fit in your outlet, consult an electrician for replacement of the  
obsolete outlet.  
12. Protect the power cord from being walked on or pinched particularly at  
plugs, convenience receptacles, and the point where they exit from the  
lamp.  
13. Only use attachments/accessories specified by the manufacturer.  
14. Unplug this lamp during lightning storms or when unused for long periods  
of time.  
15. If the lamp has been damaged in any way, such as power-supply cord or  
plug is damaged, liquid has been spilled or objects have fallen into the lamp,  
the lamp has been exposed to rain or moisture, does not operate normally,  
or has been dropped, it should not be operated. There are no user  
serviceable parts within this lamp.  
16. Modifications not authorized by the manufacturer will void the warranty  
and may result in personal injury.  
SAVE THESE INSTRUCTIONS  
3
Power Supply (AC Adapter) Precautions  
WARNING: To reduce risk of AC adapter (power supply) failure:  
• Avoid placing the AC adapter near heat sources or in  
direct sunlight.  
• Keep AC adapter out of reach of small children.  
• Do not allow water, moisture or foreign objects near  
the AC adapter.  
• Do not cover the AC adapter with any objects.  
CAUTION: Always use the power adapter supplied with this  
product. Do not use any other adapter. Lamp could become  
damaged, and warranty would become void.  
Battery Precautions  
WARNING: To prevent battery leakage which may result in  
bodily injury, property damage, or damage to the lamp:  
• Use only the size type of batteries specified.  
• When installing the batteries, be sure to follow the correct polarity  
as indicated in the battery compartment. Improperly inserted  
batteries may cause damage to the device.  
• Do not mix different types of batteries together (alkaline and carbon-  
zinc) or old and new batteries.  
• Remove batteries when the lamp is not used for more than a week.  
4
General Precautions  
Avoid placing this lamp and AC adapter in areas that are  
exposed to direct sunlight or close to heat-radiating products,  
such as heaters. Do not place the lamp or AC adapter on the  
top of appliances that radiate heat.  
Avoid placing the lamp in areas that are dusty, humid/moist,  
and lack ventilation, or are subject to constant vibration.  
Not for use with light dimmers, timers, motion detectors or  
extension cords.  
Do NOT use lubricating agent in bulb assembly.  
Close supervision is necessary when this appliance is used by  
or near children or disabled persons.  
WARNING: This lamp is supplied with a shade designed  
specifically for this use with this product. Use of any other  
shade other than the one supplied by the manufacturer may  
pose a SAFETY HAZARD.  
CAUTION: If outer glass of the bulb breaks, avoid touching  
any metal components due to potential shock. The bulb may  
continue to light, however, immediately turn power off and let  
the bulb cool before removal to avoid potential burn and  
discontinue use.  
5
General Precautions  
This device complies with part 15 of the FCC Rules. Operation  
is subject to the following two conditions: (1) this device may  
not cause harmful interference, and (2) this device must accept  
any interference received, including interference that may  
cause undesired operation.  
This equipment has been tested and found to comply with the limits for  
a Class B digital device, pursuant to part 15 of the FCC Rules. These  
limits are designed to provide reasonable protection against harmful  
interference in a residential installation. This equipment generates,  
uses and can radiate radio frequency energy and, if not installed and  
used in accordance with the instructions, may cause harmful  
interference to radio communications. However, there is no guarantee  
that interference will not occur in a particular installation.  
If this equipment does cause harmful interference to radio or television  
reception, which can be determined by turning the equipment off and  
on, the user is encouraged to try to correct the interference by one or  
more of the following measures:  
• Reorient or relocate the receiving antenna.  
• Increase the separation between the equipment and receiver.  
• Connect the equipment into an outlet on a circuit different  
from that to which the receiver is connected.  
• Consult the dealer or an experienced radio/TV technician  
for help.  
6
Set-Up Instructions  
Unpacking  
Please check the shipping carton for the following items:  
Shade  
Bulb  
AC Adapter  
Lamp  
Housing  
Pillow Speaker  
*If applicable  
Battery Compartment  
(under the lamp)  
Selecting a location  
• Place your Verilux® Rise & Shine® Natural Alarm Clock® Bedside  
Lamp on a table or other flat surface near your bedside.  
• For best performance, place your Rise & Shine® Natural Alarm  
Clock® Bedside Lamp within two feet of a wall, and avoid placing  
directly in a corner.  
®
®
Note: Avoid placing your Rise & Shine Natural Alarm Clock Bedside Lamp  
on a metal surface – It could interfere with AM reception.  
Note: Avoid placing this lamp and AC adapter in areas that are exposed to  
direct sunlight or close to heat-radiating products, such as heaters. Do not  
place the lamp or AC adapter on the top of appliances that radiate heat.  
7
Set-Up Instructions  
IMPORTANT – Installation of batteries, while not required, is  
recommended prior to installation of the shade and bulb.  
Installation of batteries is required for backup operation.  
Inserting batteries for backup  
In the event that the Rise & Shine® Natural Alarm Clock® Bedside  
Lamp loses power, the clock time and alarm settings are stored in  
backup memory for up to 48 hours.  
1. Open the battery door located on the bottom of the lamp  
(do not remove screw located adjacent to battery door).  
2. Insert four AA batteries (not included) according to the polarity  
indicated inside the battery compartment, and replace the  
battery door.  
Note: With the backup battery power, the batteries provide temporary power  
only for memory of the alarm settings – the light will not function.  
Shade & bulb installation  
1. Remove the clear cellophane protective wrap  
from the lamp shade.  
CAUTION – Failure to remove cellophane  
protective wrap from the lamp shade may  
pose a RISK OF FIRE OR PERSONAL  
INJURY.  
2. Attach the shade to the lamp by aligning  
the ring of the shade harp with the ring  
on the lamp socket – push firmly down.  
3. Carefully Screw the bulb into socket.  
– DO NOT FORCE.  
8
Set-Up Instructions  
Connecting the AC Adapter  
1. Plug the AC adapter cable into the back of the power connector  
labeled DC 12V/5A (see A).  
2. Plug the power supply cord into the AC adapter, (see B) and then  
into an AC wall outlet (see C).  
Note: When AC adapter is plugged in, the lamp will not draw any power  
from the batteries.  
WARNING: The AC adapter should be situated so that its  
location or position does not interfere with its proper  
ventilation. For example, the AC adapter should not be  
situated near heat sources or in direct sunlight.  
WARNING: Do not cover the AC adapter with any objects  
or materials.  
9
Display and Controls  
Light Switch  
ON/Off & Dimming  
Radio  
ON/OFF  
Nature Sounds  
Tuner Dial  
ON/OFF  
Radio  
Display  
AM/FM  
Display Dim  
High/Low  
Color  
Mode  
Programming  
Buttons  
Volume  
Wake  
Alarm Options  
(Sound, Light)  
Sleep  
Alarm Options  
(5,15,30,60 minutes)  
Snooze/Alarm Reset  
IMPORTANT – This lamp may be sensitive to high levels of  
static electricity. If the lamp powers off or the display becomes  
irregular, reset by unplugging the power cord for a minimum  
of 15 seconds.  
10  
Clock Setting  
IMPORTANT – Before setting the time,  
confirm that the WAKE alarm setting is off -  
Light, Sounds lights must be OFF  
Setting the clock  
1. Press & hold the SET button until the  
HOUR begins to flash, then release.  
2. To set the HOUR, press the or button  
until you have reached the desired hour.  
To confirm, press the SET button – the  
MINUTE flashes.  
SET  
Note: For faster clock mode settings, press and hold the or button.  
3. To set the MINUTE, press the or button until you have reached  
the desired minute. To confirm, press the SET button – the AM/PM  
flashes.  
4. To set the AM/PM, press the or button. To confirm, press the  
SET button – the MONTH flashes.  
5. To set the MONTH, press the or button. To confirm, press the  
SET button – the DAY flashes.  
6. To set the DAY, press the or button. To confirm, press the SET  
button – the YEAR flashes  
Note: The day of the week will set automatically when the Month, Day,  
and Year are set.  
7. To set the YEAR, press the or button. To confirm, press the  
SET button.  
8. The Time/Date is now set.  
11  
Alarm Setting  
Setting the WAKE alarm  
The Rise & Shine® Natural Alarm Clock® Bedside Lamp allows you to  
wake gradually, using one of the pre-set wake time delay cycle options  
(5, 15, 30, 60 minutes), in combination with energizing Light, Sounds,  
or a combination of Light and Sound.  
Example:  
Alarm Time = 6:30am  
Alarm Options = Sounds (TOWN)  
and Light  
Wake Time Cycle = 30 minutes  
MIN  
The alarm will begin at 6:00am  
(because of 30 minute time delay cycle).  
The sounds and light will start at a very  
low level and will gradually increase to  
maximum at 6:30am.  
Note: When the Alarm is  
selected the  
is displayed.  
SELECTING THE ALARM MODE  
1. To select the Alarm Options (Light, Sound)  
first press the WAKE button. Use the WAKE  
button to cycle through the alarm options,  
which illuminate to indicate settings.  
Note: The Alarm Option  
choice is also represented  
on the clock  
display.  
12  
Alarm Setting  
SELECTING THE ALARM TIME  
1. Press & hold the SET button until the HOUR begins to flash,  
then release.  
2. To set the alarm HOUR, press the or button until you  
have reached the desired hour. To confirm, press the SET  
button – the MINUTE flashes.  
Note: For faster clock mode settings, press and hold the or button.  
3. To set the alarm MINUTE, press the or button until you  
have reached the desired minute. To confirm, press the SET  
button - the AM/PM flashes.  
4. To set the alarm AM/PM, press the or button. To confirm,  
press the SET button - the Wake  
SOUND flashes.  
MIN  
5. To set the Wake SOUND, press  
the or button to select the  
sound. To confirm the Wake  
SET  
Sound, press the SET button –  
the Wake TIME flashes.  
Wake Sounds include:  
• Birds  
• Rain  
• Brook  
• Forest  
Town  
• Surf  
• Harbor  
• Wind  
• Buzzer  
MIN  
• AM/FM Radio  
6. To set the Wake Time CYCLE,  
press the or button until you  
have reached the desired time.  
Choices are: 5, 15, 30 or 60  
SET  
minutes. To confirm the wake time CYCLE, press the SET  
13  
Snooze/Alarm Reset  
Using the SNOOZE/RESET function  
There are three ways of switching off the alarm – (Snooze,  
24 Hour Alarm Reset, Canceling the Alarm.)  
However, if the alarm is not turned off after at the end of the alarm  
cycle, it will continue to operate for approximately 30 minutes (then  
turn off automatically).  
1. SNOOZE  
This restarts your alarm cycle after a 9-minute interval.  
To activate, during the alarm, tap SNOOZE/RESET button. Note:  
alarm will begin again at the dimmest/quietest setting and run for  
the entire wake cycle.  
2. 24 HOUR ALARM RESET  
If you want the alarm mode to be stopped immediately but also wish  
to retain the same alarm setting for the following day:  
• For Sound only and Sound & Light mode: Press and hold the  
SNOOZE/RESET during the alarm cycle until the sound goes off  
and the “Alarm On” icon on the display stops flashing.  
• For Light Mode only: Press and hold the SNOOZE/RESET during  
the alarm cycle until the “Alarm On” icon on the display stops  
flashing.  
In either case, the light must be turned off manually by pressing the  
light switch button.  
3. CANCELING THE ALARM COMPLETELY  
To cancel the set alarm modes entirely:  
• Press the WAKE button until there is no WAKE alarm option  
(Light, Sound) illuminated.  
IMPORTANT – If the LIGHT or LIGHT & SOUNDS alarm  
mode is selected, the light will remain on at the level when the  
SNOOZE/RESET button is activated. To turn the lamp off, press  
the light switch button  
14  
Sleep Function  
Using the SLEEP function  
The Rise & Shine® Natural Alarm  
Clock® Bedside Lamp allows you  
to fall asleep gradually, using one  
of the pre-set Sleep Time Cycles  
(5, 15, 30, 60 minutes).  
When using this feature, the volume  
of the sound and/or brightness of the  
light will gradually decrease over the  
set Sleep Time Cycle, allowing you  
to fall asleep gently.  
• First turn on the desired Radio,  
Sound, or Light function. Then,  
press the SLEEP button until  
you have reached the desired Sleep Time Cycle.  
Choices are: 5, 15, 30 or 60 minutes.  
Lamp Function  
Using the LAMP function  
1. To turn the light ON/OFF, push in the LIGHT knob.  
2. To dim or brighten the light, rotate the knob left or right and hold.  
ATTENTION – The Rise & Shine® Natural Alarm Clock® Bedside  
Lamp features “Dimmer Memory” — an exclusive Verilux® — design  
that remembers the last light OFF intensity, so the next time the light  
is switched ON the same brightness level will be recalled.  
15  
Sounds Function  
Using the SOUNDS function  
The Rise & Shine® Natural Alarm  
Clock® Bedside Lamp allows you  
to listen to 8 pre-programmed  
nature sounds at any time:  
SOUNDS  
RADIO  
• Birds  
• Harbor  
Town  
• Brook  
• Surf  
• Forest  
• Rain  
• Wind  
1. To listen to sounds at any time, press the SOUNDS button.  
2. To change sounds, press the or button.  
3. To change the volume, press the  
+ or - button.  
4. To turn sounds OFF, press the SOUNDS button again.  
Radio Function  
Using the RADIO function  
SOUNDS  
RADIO  
1. To turn on the radio, press the RADIO  
button.  
2. Slide the AM/FM selector switch to the  
desired choice.  
3. To select the station, use the TUNER dial.  
4. To change the volume, press the + or –  
button.  
5. To turn radio OFF, press the RADIO button again.  
NOTE: To improve FM reception, fully unwind the FM WIRE ANTENNA  
located on the back of the lamp and position it for best sound.  
16  
Color Mode Function  
Using the COLOR MODE function  
The lamp features a Color Changing Display that can be set to fade  
between seven different colors or locked on one color.  
SEVEN COLOR FADE  
• This is the default setting. When the lamp is first plugged in the  
backlight is set to seven color fade mode.  
SINGLE COLOR  
To select a single color, press the COLOR MODE button when the  
color you prefer is displayed (stops the color fade cycle).  
• Press the COLOR MODE button again to repeat fade cycle and  
select another color.  
DISPLAY DIM  
The display brightness can be adjusted depending on personal  
preference.  
To select the display brightness, select DISPLAY DIM HIGH/LOW  
button on the side of the lamp.  
Note: For the best color display results, set the HIGH/LOW switch to the  
HIGH setting.  
Note: Orange and Red tones are preferred display colors for viewing the  
display without excess light at night.  
17  
Warranty  
Three-Year Limited Warranty  
ATTENTION – ONCE OPENED, PLEASE DO NOT RETURN THIS  
PRODUCT TO THE STORE WHERE IT WAS PURCHASED FOR  
REPAIR OR REPLACEMENT!  
may call our customer service department at 888-544-4865  
This limited warranty is provided by:  
Verilux, Inc., 340 Mad River Park, Waitsfield, VT 05673  
Verilux® warrants this product to be free from defects in material and workmanship for  
a period of three years from the date of the original retail purchase. During the limited  
warranty period, Verilux, Inc. will, at its option, repair or replace defective parts of this  
product, at no charge to the customer, subject to the following limitations. This limited  
warranty does not include any postage, freight, insurance or delivery fees. This  
warranty does not cover damage, defect or failure caused by or resulting from  
accident, external destruction, alteration, modification, abuse, misuse, or  
misapplication of this product.  
If, during the first Three years of ownership, this product fails to operate properly, it  
should be returned as specified below.  
Please pack the defective product in its original protective packing and box, with a  
copy of your sales receipt, along with $6.95 (check or money order to cover shipping  
and handling), and send to:  
For U.S. Postal Service Only:  
Verilux Warranty Service Center  
c/o WTB  
For Fed Ex & UPS Only:  
Verilux Warranty Service Center  
c/o WTB  
P.O. Box 119, West Redding, CT 06896  
32 Henry St., Bldg 17A, Bethel, CT 06801  
Please allow 4–6 weeks before you receive the repaired or replaced product.  
ATTENTION – When returning a product, be aware that damage  
during shipping is the responsibility of the purchaser and will void any  
warranty claim. We recommend that you insure the shipment with your  
post office or other shipping service when returning this product or any  
parts. Be sure to return product in original packaging.  
®
Note: Verilux recommends using a quality surge suppressor on all electronics  
equipment. Voltage variations and spikes can damage electronic components in any  
system. A quality suppressor can eliminate the vast majority of failures attributed to  
surges and may be purchased at electronics stores.  
Due to ongoing improvements, actual product may have slight variations from the product described in this manual.  
18  
Please visit our web site at:  
Call our Customer  
Service Department at  
1-888-544-4865  
?
340 Mad River Park, Waitsfield, VT 05673  
Printed in China for: Verilux, Inc.  
© Copyright 2007 Verilux, Inc.  
All rights reserved.  
VA02-MAN-Rev5  

Sunbeam Coffeemaker PC7900 User Manual
Sony Rechargable Battery Pack VGPBPSC31 User Manual
Sony CDX SW200 User Manual (1)
Sonic Alert Boundary Devices Neon Board 28 User Manual
Seagate MOMENTUS ST980825AS User Manual
Samsung FLEX MUXONENAND KFN8GH6Q4M User Manual
Samsung 840 EVO MZ 7TD500BW User Manual
RCA CD Player RP2421 User Manual
Philips KPATKOE PYKOBOACTBO 10FF3CMI User Manual
Philips FLAT TV 42PFL5332 User Manual