Tripp Lite U232 006 User Manual

Owner’s Manual  
Hi-Speed USB 2.0 File Transfer Cable  
Model: U232-006  
1. Installation  
2
3
4
5
6
2. Operation  
3. Alternate Transfers  
4. Specifications  
5. Warranty Registration  
Introduction  
System Requirements  
• Intel Pentium 1 GHz or faster PC  
• 128 MB RAM or higher  
The U232-006 enables you to transfer files between computers  
at speeds of up to 480Mbps. It automatically detects and installs  
peripherals. Ideal for transferring data between Windows XP and  
Vista-equipped computers.  
• USB port (Hi-Speed USB 2.0 for Hi-Speed transfer)  
• Windows XP, SP2 or Vista  
• Hot pluggable — connect while the computer is running  
• No external power necessary  
• Activity LED  
• Plug and Play  
• No additional drivers or software needed for Vista  
Tripp Lite World Headquarters  
1111 W. 35th Street, Chicago, IL 60609 USA  
(773) 869-1234 (USA) • 773.869.1212 (International)  
Copyright © 2009 Tripp Lite. All rights reserved. All trademarks are the property of their respective owners.  
1. Installation  
Windows XP continued  
2. You will ne notified upon connection between the two computers:  
1. You will be prompted to identify the computer that you are on as  
the recipient or the sender:  
2. Operation  
Launch the Easy Transfer Utility on Both Computers  
Easy Transfer is a Windows-based utility that allows two computers  
to transfer files and settings from a computer running Windows XP or  
Vista to another computer running Windows Vista. To use the utility,  
plug the File Transfer Cable into the USB ports on both computers  
and then start the utility on both computers.  
• After launching the utility, just follow the on-screen instructions.  
Note: Keep the following in mind when using the utility:  
You must launch Easy Transfer on both computers involved in the  
transfer of files/settings so that they can detect each other  
• Transfers can only be made from Windows XP/Vista to Windows  
Vista; you cannot transfer files/settings from Vista to XP  
Note: If this is a first-time transfer, follow the install steps above then  
go to Step 1 in this section:  
• When prompted to choose a transferring media, select USB cable  
On Windows Vista: Select Start Programs Prolific PCLinq3  
You can only transfer files/settings between operating systems  
using the same language; for example, you can’t transfer files/  
settings from a traditional Chinese system to an English system  
On Windows XP: Select Start Programs Prolific PCLinq3  
Note: You will choose between Ansi and Unicode. Both computers  
must use the same.  
Transfer Example  
The following steps show the screens and associated procedures  
involved with a transfer of files from Windows XP to Vista.  
Step 3 on XP & Vista: When the prompt Install the Easy Transfer  
Cable and connect your computers (see below) displays, wait for the  
message A connection to the other computer has been detected to  
display — it only appears briefly at the bottom of the screen.  
Note: The partial screen samples shown may not actually show  
during some transfer procedures, or may appear different due to  
varying OS versions or computer settings.  
Step 1 on XP & Vista: A Windows Easy Transfer welcome screen  
displays. Click Next.  
Step 2 on XP: The prompt Choose how to transfer files and settings  
to your computer displays. Select Use an Easy Transfer Cable  
(recommended) as shown below:  
Step 2 on Vista: The prompt Do you have an Easy Transfer Cable?  
displays. Select Yes, I have an Easy Transfer Cable as shown below:  
3
2. Operation  
Transfer Example continued  
Step 4 on XP: When the prompt What do you want to transfer to your  
new computer? displays (see below), make a selection from among  
the three options that appear. Subsequent screens in this example are  
based on an Advanced options selection.  
Step 6 on XP: If either account-related option is selected in Step 4  
on XP, the prompt Type a new user name or click a name in the list  
displays. Select either option for the target (file-receiving) computer,  
then click Next.  
Step 4 on Vista: When the message Your computers are now  
connected displays, stop (while the XP system proceeds through Steps  
5 and 6).  
Step 5 on XP: When the prompt Select user accounts, files, and  
settings to transfer displays, select the folders you want to be  
transferred and click Next.  
Step 7 on XP & Vista: A Please wait until the transfer is complete  
message displays with a procedure status bar. Wait for the next screen  
to appear.  
Step 8 on XP: When the message You’re ready to transfer files and  
settings to your new computer displays, click Close to exit the utility.  
Step 8 on Vista: When the message The transfer is complete displays  
(with a summary of transferred items), click Close to exit the utility.  
3. Alternate Tramsfers Between Windows Operating Systems  
It is possible to transfer files between the following:  
Vista to XP  
XP to XP  
XP to Win2000  
Win2000 to XP  
Vista to Win2000  
Win2000 to Vista  
In order to conduct transfers between the above operating systems,  
install the PCLinq3 software on the targeted computers. Launch the  
console as stated earlier (Start Programs Prolific PCLinq3). The  
following console will open on both computers:  
Note: each computer will display it’s internal root directory.  
4
3. Alternate Tramsfers Between Windows Operating Systems  
Plug the Transfer Cable into each computer. Once the connection is  
established between the two computers, the indicator lights in the  
bottom right corner of the console will change to green.  
You will now be able to move to different directories on each  
computer and drag files between the computers. A status pop-up will  
display to indicate transfer progress and completion:  
A file transfer will not remove the file from the source computer. The  
transfer is a copy function. You may remove a file by right-clicking on  
the file and selecting cut:  
4. Specifications  
General  
Power  
• Plug and Play — automatic detection and installation of peripherals  
• Windows XP/Vista compatible  
• Bus powered  
• Power consumption: < 500 mA (Suspend and Active modes)  
Certifications/Approvals  
• FCC  
• CE  
System Requirements  
• Intel Pentium 1 GHz or faster PC  
• 128 MB RAM or higher  
• Hi-Speed USB 2.0  
• Windows  
• USB port (Hi-Speed USB 2.0 for Hi-Speed transfer)  
• Windows XP, SP2 or Vista  
Connections  
• Interface: USB 2.0  
• Transfer speeds: up to 480 Mbps  
• Connection type: type-A male connections  
5
5. Warranty Registration  
WARRANTY REGISTRATION  
Visit www.tripplite.com/warranty today to register the warranty for your new Tripp Lite product. You’ll be automatically entered into a drawing for a chance to win a FREE Tripp Lite  
product!*  
* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.  
WEEE Compliance Information for Tripp Lite Customers and Recyclers (European Union)  
Under the Waste Electrical and Electronic Equipment (WEEE) Directive and implementing regulations, when customers buy new electrical and electronic equipment from Tripp Lite  
they are entitled to:  
Send old equipment for recycling on a one-for-one, like-for-like basis (this varies depending on the country)  
Send the new equipment back for recycling when this ultimately becomes waste  
Tripp Lite follows a policy of continuous improvement. Product specifications are subject to change without notice.  
Made in China.  
Tripp Lite World Headquarters  
1111 W. 35th Street, Chicago, IL 60609 USA  
(773) 869-1234 (USA) • 773.869.1212 (International)  
200904107 • 932896-EN  
6

Texas Memory Systems RamSam 210 User Manual
Sony CDX GT212 User Manual
Sony 1261 4180 User Manual
Siemens A65 User Manual
Sears Craftman 24779585 User Manual
Seagate Backup Plus STCB3000100 User Manual
Philips FLAT TV 42PFL9732D User Manual
Panasonic ProMax EB TX210 User Manual
Oregon Scientific RAR186 User Manual
Nokia 9357715 User Manual