Toshiba SD R6472 User Manual

TOSHIBA AMERICA INFORMATION SYSTEMS  
STORAGE DEVICE DIVISION  
IRVINE, CALIFORNIA  
SD-R6472  
DVD REWRITEABLE MOBILE DRIVE  
USER MANUAL  
INTRODUCTION – SD-R6472  
General Features  
Reads and records digital data on DVD-R/-RW, DVD+R/+RW and CD-R/-RW discs..  
Read  
8X  
6X  
8X  
2X  
24X  
24X  
24X  
-
Write  
8X  
DVD-R/+R  
DVD-RW/+RW  
DVD-ROM  
DVD-RAM  
CD-ROM  
4X  
n/a  
n/a  
n/a  
CD-R  
24X  
4X  
CD-RW  
HS CD-RW  
US CD-RW  
10X  
10X  
-
3-way Disc Eject (eject button, software, emergency eject hole)  
Average Random Access Time  
CD:  
105ms  
250ms  
120ms  
DVD-RAM:  
DVD-ROM  
Horizontal or Vertical Mount  
2MByte Buffer  
Playback interchangeability for CD-ROM and DVD-ROM discs  
Regionalization (RPC2 compliance) (DVD)  
BUS Interface  
ATAPI  
1
Types of Disc Formats Supported - Write  
Applicable Write Format  
DVD-R  
Disc at once, incremental write  
DVD-RW  
DVD+R  
Disc at once, incremental write, restricted overwrite  
Sequential Recording  
DVD+RW  
CD-R/-RW  
Sequential Recording, Random Write  
Disc at once, Track at once, Session at once, Packet write  
Applicable Write disc  
DVD-R  
DVD-R (Ver 2.0 & Ver 2.1 for General),  
DVD-RW  
DVD+R  
DVD+RW  
DVD-RW (Ver 1.1 & Ver 1.2)  
DVD+R (4.7GB basic Format spec Ver. 1.3)  
DVD+RW (4.7GB basic Format spec Ver. 1.2)  
CD-R/-RW  
HS CD-RW  
US CD-RW  
CD-DA, CD+(E)G, CD-MIDI, CD-ROM, CD-ROM XA,  
MIXED MODE CD, CD-I, CD-I Bridge (Photo-CD, Video-  
CD), Multi-session CD (Photo-CD, CD-EXTRA, Portfolio)  
Types of Disc Formats Supported - Read  
DVD:  
DVD-ROM (DVD-5, DVD-9, DVD-10, DVD-18)  
DVD-R (Ver 1.0 for Authoring, Ver. 2.0 & Ver. 2.1 for General)  
DVD-RW (Ver 1.1, 1.2)  
DVD+R (4.7GB Basic Format spec. Ver. 1.3)  
DVD+RW (Ver 1.2), DVD-RAM (Ver 2.1)  
CD:  
CD-DA, CD+(E)G, CD-MIDI, CD-TEXT, CD-ROM, CD-ROM XA, CD-I, CD-I Bridge (Photo-CD,  
Video-CD), Multi-session (Photo-CD, CD-EXTRA, CD-R, CD-RW, Portfolio)  
Front Panel  
Figure 1.SD-R6472 DVD Writeable Drive Front Panel  
Load disc using tray.  
Loading  
Tray  
The LED lights green or amber when the drive is operating (LED is amber when drive is  
writing.)  
Busy  
Indicator  
The Eject button is used to open the disc tray so you can install or remove a disc.  
Eject  
Button  
The emergency eject hole is to be used only when the Loading Tray will not open when  
Eject button is pressed.  
Emergency  
Eject Hole  
SETUP – SD-R6472  
Toshiba recommends that only trained professionals install this DVD Rewriteable drive into your  
laptop/notebook.  
Installation Notes  
The SD-R6472 DVD Rewriteable drive has no jumpers that need to be set  
Mounting orientation: 15° (horizontally), 15° vertically (volume control in down position), 30°  
(drive with volume control in up position).  
When mounting drive use 4 M2-PO.4 tapping holes located on the left and right sides of drive.  
When mounting drive, the tightening torque of the four screws must be even. Recommended  
screw tightening torque is 2N  
For clearance around the front bezel, it is recommended that a clearance of more than 0.8mm  
should be left in all directions.  
Software Driver  
Toshiba's SD-R6472 drive does not require any unique device drivers for Windows '98/2000/XP/NT.  
After installing your drive and re-booting, your system should recognize your drive. Win '98/2000/XP/NT  
Operating Systems support all Toshiba's ATAPI drives natively. If you prefer using DOS, download the  
ATAPI driver from our web site.  
4
USING THE DVD REWRITEABLE DRIVE – SD-R6472  
Drive Operation  
Inserting Media  
To insert media perform the following steps:  
1. Figure 1.Inserting Disc  
1. Open the drive's loading tray by pressing the Eject Button and pulling out the tray.  
2. Place media disc into drive's loading tray, and lightly press down on the inner portion of the disc.  
3. Gently close the disc tray.  
Removing Media  
To remove media disc from the drive, perform the following steps:  
1. Open the loading tray by pressing the Eject Button, and pulling tray out.  
2. Grasp disc by it's outer edge, and lift out of loading tray.  
3. Gently close the loading tray.  
Usage Guidelines  
Keep the disc tray closed when not using the DVD Rewriteable drive  
Do not press down on the disc tray when opening or closing it.  
Do not place objects on the disc tray  
Never use a damaged, broken, or deformed disc  
Do not press the Eject button while the drive is accessing a disc  
5
Emergency Ejection  
CAUTION: The following procedure is intended only as a last resort when  
pressing the eject button fails to open the Loading Tray.  
1. Turn computer power OFF by properly shutting down system.  
2. Insert a solid bar (i.e. large paper clip) into Emergency Eject hole and push in as shown in the  
picture below.  
3. Loading tray will open/eject.  
Figure 2.Using Emergency Eject  
Handling Media  
CD/DVD media is sensitive to dust and fingerprints. Carefully handle media by its edges only.  
Cleaning Media  
Try to avoid touching the read area (underside) of the disc as dirt and smears will degrade the disc  
accessing speed.  
If the disc becomes dirty wipe it with a damp soft cloth. Avoid cleaning in a circular motion, but rather  
from the inner side outward.  
NOTE: High-speed drives spin the disc at a high rotational speed. If a disc has printing on only  
half of the disc, or if there is a slight imbalance in the disc, the imbalance is greatly magnified by  
the high speed, causing the drive to vibrate or produce a fan-like noise. These effects are  
inherent in the high-speed technology and do not indicate a problem with the drive.  
6
TROUBLESHOOTING – SD-R6472  
Problem  
Solution  
Disc tray cannot be opened  
Check that there is power to drive.  
Use Emergency Eject instructions to open tray.  
Drive is not recognized by system  
Is the drive connected properly? Are all cables plugged in properly (e.g.  
Power Cable, Interface Cable and Audio Cables).  
Is the software driver loaded? On a step-by-step (F8) Boot of the  
system is the DVD Rewriteable drive recognized?  
(BIOS / DOS reports "device driver not found" or "no valid drivers  
selected."). If not, Contact Technical Support.  
Has the DVD Rewriteable drive software driver been corrupted by a  
virus. Run a Virus Scan program and repair if possible. Contact  
Technical Support if the Virus renders the DVD Rewriteable drive  
software drivers not useable.  
Drive is not recognized by system  
during Boot process, but is  
recognized by the Operating  
System (i.e. XP, Win2000, Win98,  
Win NT, etc.)  
Is the DVD Rewriteable drive software driver loaded? On a step-by-step  
(F8) Boot of the system is the DVD Rewriteable drive recognized?  
(BIOS / DOS reports "device driver not found" or "no valid DVD drivers  
selected."). If not, Contact Technical Support.  
Has the Windows DVD Rewriteable drive software driver program been  
corrupted by a virus. Run a Virus Scan program and repair if possible.  
Contact Technical Support if the Virus renders the software drivers not  
useable.  
BUSY Indicator LED flashes  
slowly  
The disc may be dirty Clean it with a soft damp cloth. Avoid cleaning the  
disc using a circular motion. The disc should be wiped in a radial  
direction. That is, from the inner side outward.  
The laser lens may have become cloudy or blocked by particulate  
matter. Please contact Technical Support.  
BUSY Indicator LED is constantly  
ON  
Possible Hardware Problem. Please contact Technical Support.  
DVD-ROM can not play a DVD in  
the drive or certain types of CD  
media (i.e. CD-plus, etc.)  
Is the DVD Rewriteable drive driver loaded  
Is the DVD disc the correct format for the type of system that you are  
using? (i.e. on a PC an ISO9660 IBM compatible PC format as opposed  
to Apple/Mac HFS disc or UNIX disc formats which will not function).  
Do you have the correct software applications program/drivers installed  
to run a DVD disc?  
Has the Windows DVD Rewriteable drive software driver program been  
corrupted by a virus. Run a Virus Scan program and repair if possible.  
Contact Technical Support if the Virus renders the software drivers not  
useable.  
7
SPECIFICATIONS –SD-R6472  
General  
Interface:  
ATAPI  
Applicable Write Format  
DVD-R  
DVD-RW  
DVD+R  
Disc at once, Incremental write  
Disc at once, Incremental write, Restricted overwrite  
Sequential Write  
DVD+RW  
CD-R/-RW  
Sequential Write, Random Write  
Disc at once, Track at once, Session at once, Packet write  
Applicable Write disc  
DVD-R  
DVD-RW  
DVD-R (Ver 2.0 & 2.1 for General)  
DVD-RW (Ver1.1 & Ver 1.2)  
DVD+R  
DVD+RW  
CD-R/-RW,  
DVD+R (4.7GB Basic Format Spec, Ver 1.3)  
DVD+RW (4.7GB Basic Format Spec, Ver 1.2)  
CD-DA, CD+(E)G, CD-MIDI, CD-ROM, CD-ROM XA, CD-I, MIXED MODE CD,  
HS CD-RW, CD-I Bridge (Photo-CD, Video-CD), Multi-session CD (Photo-CD, CD-Extra,  
US CD-RW Portfolio)  
Applicable Read Formats:  
DVD  
DVD-ROM (DVD-5, DVD-9, DVD-10, DVD-18),  
DVD-R (Ver. 1. for Authoring, Ver. 2.0 & Ver 2.1 for General, DVD-RW  
(Ver. 1.2, Ver. 1.1), DVD+R (4.7GB Basic Format Spec. Ver. 1.3),  
DVD+RW (Ver 1.2), DVD-RAM (Ver. 2.1)  
CD  
CD-DA, CD+(E)G, CD-MIDI, CD-TEXT, CD-ROM, CD-ROM XA, CD-I,  
CD-I Bridge (Photo-CD, Video-CD), Multi-session (Photo CD, CD-Extra,  
CD-R, CD-RW, Portfolio)  
Note: All DVD/CD formats, except CD-Red Book (audio), require additional application specific software  
and/or hardware. The drive is capable of reading these data formats. However, in order to run applications  
that use these formats, you must first have the required software and/or hardware.  
8
Data Disc Capacities  
DVD-ROM  
4.377GB (DVD-5)  
7.959GB (DVD-9)  
8.754GB (DVD-10)  
15.917GB (DVD-18)  
3.679GB  
4.377GB  
4.377GB  
DVD-R (Ver 1)  
DVD-R (Ver 2.0)  
DVD-RW  
DVD+R  
DVD+RW  
4.377GB  
4.377GB  
DVD-RAM (Ver 2.1)  
CD  
4.377GB  
656.5MB (mode 1)  
748.8MB (mode 2)  
Performance  
Rotational Speed  
DVD-ROM (single layer)  
DVD-ROM (dual layer)  
DVD-R (Ver. 1.0)  
DVD-R (Ver. 2.X)  
DVD-RW (Ver 1.X)  
DVD+R  
DVD+RW  
DVD-RAM (Ver 2.1)  
DVD-R (Ver 2.1) (Write)  
4,670rpm (3.3 - 8X CAV)  
3,792rpm (2.5 - 6X CAV)  
4,670rpm (3.3 - 8X CAV)  
4,670rpm (3.3 - 8X CAV)  
3,792rpm (2.4 - 6X CAV)  
4,670rpm (3.3 - 8X CAV)  
3,792rpm (2.4 - 6X CAV)  
1,400 - 3,300rpm (2X ZCLV)  
1,140 - 2,780rpm (2X CLV)  
2,300 - 3,980rpm (2X/4X ZCLV)  
570 - 1,390rpm (1X CLV)  
1,140 - 2,780rpm (2X CLV)  
1,380 - 3,330rpm (2.4X CLV)  
2,300 - 3,980rpm (2.4X, 4X ZCLV)  
1,380 - 3,330rpm (2.4X CLV)  
5,100rpm (10.3 - 24X CAV)  
5,100rpm (10.3 - 24X CAV)  
5,100rpm (10.3 - 24X CAV)  
5,100rpm (10.3 - 24X CAV)  
5,100rpm (10.3 - 24X CAV)  
1,200 - 2,000rpm (4 - 6X PCAV)  
850 - 1,980rpm (4X CLV)  
1,700 - 3,960rpm (8X CLV)  
2,648 - 3,960rpm (8/12/16X ZCLV)  
850 - 1,980rpm (4X CLV)  
3,125 - 4,950rpm (10X CLV)  
3,125 - 4,950rpm (10X CLV)  
850 - 1,980rpm (4X CLV)  
DVD-RW (Ver 1.1) (Write)  
DVD+R (Write)  
DVD+RW (Write)  
CD-ROM, CD-R  
CD-RW  
Ultra Speed CD-RW  
High Speed CD-RW  
CD-DA Transfer  
CD-DA, Video-CD  
CD-R (Write)  
CD-RW (Write)  
Ultra Speed CD-RW (Write)  
High Speed CD-RW (Write)  
9
Transfer Rate  
DVD (Single)  
4,416 - 10,816KB/second  
3,380 - 8,112KB/second  
DVD (Dual)  
DVDR  
DVDRW  
4,420 - 10,800KB/second  
3,380 - 8,112KB/second  
DVD-RAM (Ver 2.1)  
CD  
2,740KB/second  
1,545 - 3,600KB/second (mode 1)  
600 - 900KB/second (mode 1)  
1,761 - 4,104KB/second (mode 2)  
684 - 1,026KB/second (mode 2)  
1,545 - 3,600KB/second (mode 1)  
1,761 - 4,104KB/second (mode 2)  
CD-RW  
Random Access Time  
120ms  
105ms  
250ms  
DVD  
CD  
DVD-RAM  
Data Error Rate  
10-15 Max  
DVD-ROM  
CD-ROM  
10-15 Max (Mode 1)  
10-12 Max (Mode 2)  
Data Buffer  
2MB  
Reliability  
MTBF  
60,000 hours  
5,436 hours/year  
313 cycles/year  
600,000 accesses/year  
20% of Power ON time (Reading/Seeking)  
2% of Power ON time (Writing/Seeking)  
0.5 hours  
Power ON Hours  
ON/OFF Cycles  
Number of Access  
Operating Duty Cycle  
MTTR  
Environmental  
Ambient Temperature  
Operating  
5° to 50° C (41° to 122° F)  
-10° to 60° C (14° to 140° F)  
-40° to 65° C (-40° to 149° F)  
Storage  
Shipping  
Temperature Gradient  
Operating  
11° C /hour (max)  
Storage/Shipping  
20° C /hour (max)  
10  
Relative Humidity  
Operating  
8% to 80%  
5% to 95% (wet bulb 40 C max)  
Storage/Shipping  
Vibration  
Operating (5 to 500 Hz) (read)  
Operating (5 to 500Hz) (write)  
Non-operating (10 to 500Hz)  
2.45 m/s2 (0.25G) (O-P)  
2.45 m/s2 (0.25G) (O-P)  
9.8 m/s2 (1.0G) (O-P)  
Transporting (with packing) (10 to 25 Hz) 9.8 m/s2 (1.0G) (O-P)  
Shock (Non-operating)  
Acoustical Noise  
490 m/s2 [50G]  
40dB  
Power  
DC Voltage and Current Requirements  
+5V 5% (Operating)  
Physical  
Height  
Width  
Depth  
Weight  
0.5" (12.7mm)  
5.04" (128mm)  
4.96" (126.1mm)  
6.7oz (.19kg)  
Connectors  
IDE Interface Connector  
Regulatory  
50 Pin I/F ATAPI Standard  
The SD-R6472 DVD Writeable drive has been certified by the following  
regulatory agencies:  
UL 1950  
CSA C22.2 No. 950  
TUV (EN60950I)  
CE standard  
DHHS 21 CFR Sub-Chapter J  
FDA CFR21, EN60825  
11  
Drive Connectors –SD-R6472  
Figure 1.SD-R6472 DVD Writeable Drive Rear Panel – Connector  
A 50-pin ATAPI interface connector is found at the rear of the SD-R6472 DVD rewriteable  
drive. Connecting cable should use Japan Aviation Electronics Industry Limited KX14-  
50Series L or equivalent connector.  
ATAPI  
Connector  
Table 1.Interface Pin Assignments  
PIN  
NO.  
1
3
5
I/O SIGNAL NAME  
PIN  
NO.  
2
4
6
I/O  
SIGNAL NAME  
O
Audio L-CH  
Audio Ground  
/RESET  
O
Audio R-CH  
Digital Ground  
DD8  
DD9  
DD10  
DD11  
DD12  
DD13  
DD14  
I
I/O  
I/O  
I/O  
I/O  
I/O  
I/O  
I/O  
I/O  
O
7
9
I/O DD7  
I/O DD6  
I/O DD5  
I/O DD4  
I/O DD3  
I/O DD2  
I/O DD1  
I/O DD0  
8
10  
12  
14  
16  
18  
20  
22  
24  
11  
13  
15  
17  
19  
21  
23  
DD15  
DMARQ  
/DIOR: /  
HDMARDT:  
HSTROBE  
Ground  
/DMACK  
Ground  
I
25  
27  
I
O
/DIOW:STOP  
IORDY: /  
DDMARDY:  
DSTROBE  
INTRQ  
26  
28  
I
29  
31  
33  
35  
37  
39  
41  
43  
45  
47  
49  
O
I
30  
32  
34  
36  
38  
40  
42  
44  
46  
48  
50  
O
I/O  
/IOCS16  
/PDIAG  
DA2  
DA1  
I
DA0  
I
I
I
I
I
I
/CS1FX  
/CS3FX  
I/O /DASP  
+5V (Motor)  
+5V (Motor)  
+5V (Logic)  
Ground  
Ground  
Ground  
I
I
+5V (Motor)  
+5V (Logic)  
Ground  
Ground  
I
I
CSEL  
Vendor Unique*  
I
Vendor Unique*  
*Vender Unique, don't connect pins  
12  

Tyan Computer Computer Accessories S2877 User Manual
Toshiba STORAGE DEVICE DIVISION SD R5002 User Manual
Sony Xplod CDX M730 User Manual
Simplicity 14E User Manual
Schneider Electric ALTIVAR 58 TRX User Manual
Pioneer PD M427 User Manual
Palm Treo 700w User Manual
Nokia E71x User Manual
Nokia Cell Phone 6600 User Manual
Nokia 6190 User Manual