Toshiba LKBST 65 TF12 SERIES User Manual

TOSHIBA Operation Unit  
LKBST-65-TF12 SERIES  
Owner's Manual  
Safety Summary  
EO1-19039  
6DIHW\ꢀ6XPPDU\ꢀ  
Personal safety in handling or maintaining the equipment is extremely important. Warnings and Cautions  
necessary for safe handling are included in this manual. All warnings and cautions contained in this manual  
should be read and understood before handling or maintaining the equipment.  
Do not attempt to effect repairs or modifications to this equipment. If a fault occurs that cannot be rectified  
using the procedures described in this manual, turn off the power, unplug the machine, then contact your  
authorized TOSHIBA TEC representative for assistance.  
0HDQLQJVꢀRIꢀ(DꢁKꢀ6\PEROꢀ  
This symbol indicates warning items (including cautions).  
Specific warning contents are drawn inside the symbol.  
(The symbol on the left indicates a general caution.)  
This symbol indicates prohibited actions (prohibited items).  
Specific prohibited contents are drawn inside or near the symbol.  
(The symbol on the left indicates “no disassembling”.)  
This symbol indicates actions which must be performed.  
Specific instructions are drawn inside or near the G symbol.  
(The symbol on the left indicates “disconnect the power cord plug from the outlet”.)  
This indicates that there is the risk of death or serious injury if the  
machines are improperly handled contrary to this indication.  
:$51,1*ꢀ  
Do not plug in or unplug the  
Do not use voltages other than the  
voltage (AC) specified on the  
rating plate, as this may cause fire  
or electric shock.  
power cord plug with wet  
hands as this may cause  
electric shock.  
If the machines share the same  
outlet with any other electrical  
appliances that consume large  
amounts of power, the voltage  
will fluctuate widely each time  
these appliances operate. Be  
sure to provide an exclusive  
outlet for the machine as this  
may cause fire or electric  
shock.  
Do not place metal objects or  
water-filled containers such as  
flower vases, flower pots or mugs,  
etc. on top of the machines. If  
metal objects or spilled liquid enter  
the machines, this may cause fire  
or electric shock.  
Do not insert or drop metal,  
flammable or other foreign  
objects into the machines  
through the ventilation slits, as  
this may cause fire or electric  
shock.  
Do not scratch, damage or modify  
the power cords. Also, do not  
place heavy objects on, pull on, or  
excessively bend the cords, as this  
may cause fire or electric shock.  
If the machines are dropped or  
their cabinets damaged, first  
turn off the power switches and  
disconnect the power cord  
plugs from the outlet, and then  
contact your authorized  
TOSHIBA TEC representative  
for assistance. Continued use  
of the machine in that condition  
may cause fire or electric  
shock.  
Continued use of the machines in  
an abnormal condition such as  
when the machines are producing  
smoke or strange smells may cause  
fire or electric shock. In these  
cases, immediately turn off the  
power switches and disconnect the  
power cord plugs from the outlet.  
Then, contact your authorized  
TOSHIBA TEC representative for  
assistance.  
(i)  
Safety Summary  
EO1-19039  
If foreign objects (metal  
When unplugging the power cords,  
be sure to hold and pull on the plug  
portion. Pulling on the cord portion  
may cut or expose the internal wires  
and cause fire or electric shock.  
fragments, water, liquids) enter  
the machines, first turn off the  
power switches and disconnect  
the power cord plugs from the  
outlet, and then contact your  
authorized TOSHIBA TEC  
representative for assistance.  
Continued use of the machine in  
that condition may cause fire or  
electric shock.  
Ensure that the equipment is  
properly grounded. Extension  
cables should also be grounded.  
Fire or electric shock could  
occur on improperly grounded  
equipment.  
Do not remove covers, repair or  
modify the machine by yourself.  
You may be injured by high  
voltage, very hot parts or sharp  
edges inside the machine.  
Unauthorized modification is  
prohibited.  
&$87,21This indicates that there is the risk of personal Injury or damage to objects if  
the machines are improperly handled contrary to this indication.  
The following precautions will help to ensure that this machine will continue to function correctly.  
G Try to avoid locations that have the following adverse conditions:  
* Temperatures out of the specification  
* Shared power source  
* Direct sunlight  
* High humidity  
* Dust/Gas  
* Excessive vibration  
G Do not subject the machine to sudden shocks.  
G Do not press the keys too hard. Keys will operate correctly if they are touched lightly.  
G Clean the cover and keyboard, etc. by wiping with a dry cloth or a cloth soaked with detergent and  
wrung out thoroughly. Never use thinner or other volatile solvent for cleaning.  
G At the end of the day, turn the power OFF, then clean and inspect the exterior of the machine.  
G Try to avoid using this equipment on the same power supply as high voltage equipment or equipment  
likely to cause mains interference.  
G USE ONLY TOSHIBA TEC SPECIFIED consumables.  
G
DO NOT STORE the consumables where they might be exposed to direct sunlight, high temperatures, high  
humidity, dust, or gas.  
G When moving the machine, take hold of the drawer and lift the machine.  
G Do not place heavy objects on top of the machines, as these items may become unbalanced and fall  
causing injury.  
G Do not block the ventilation slits of the machines, as this will cause heat to build up inside the  
machines and may cause fire.  
G Do not lean against the machine. It may fall on you and could cause injury.  
G Place the machine on a stable and level surface.  
G Utilize our maintenance services.  
After purchasing the machine, contact your authorized TOSHIBA TEC representative for assistance  
once a year to have the inside of the machine cleaned. Otherwise, dust will build up inside the  
machines and may cause a fire or a malfunction. Cleaning is particularly effective before humid rainy  
seasons.  
G Our preventive maintenance service performs the periodic checks and other work required to maintain  
the quality and performance of the machines, preventing accidents beforehand.  
For details, please consult your authorized TOSHIBA TEC representative for assistance.  
G Using insecticides and other chemicals  
Do not expose the machines to insecticides or other volatile solvents. This will cause the cabinet or  
other parts to deteriorate or cause the paint to peel.  
(ii)  
EO1-19039  
LKBST-65-TF12 SERIES  
TABLE OF CONTENTS  
Page  
1. INTRODUCTION----------------------------------------------------------------------------------------- 1- 1  
1.1 Accessories ------------------------------------------------------------------------------------------------1- 1  
2. SPECIFICATIONS -------------------------------------------------------------------------------------- 2- 1  
2.1 Basic Specifications--------------------------------------------------------------------------------------2- 1  
2.2 Options------------------------------------------------------------------------------------------------------2- 1  
3. APPEARANCE------------------------------------------------------------------------------------------- 3- 1  
3.1 Front View --------------------------------------------------------------------------------------------------3- 1  
3.2 Control Lock and Mode Selector Keys---------------------------------------------------------------3- 2  
4. SETUP PROCEDURE --------------------------------------------------------------------------------- 4- 1  
4.1 Precautions for Setup------------------------------------------------------------------------------------4- 1  
4.2 Setup Procedure------------------------------------------------------------------------------------------4- 1  
5. ADJUSTMENT ------------------------------------------------------------------------------------------- 5- 1  
5.1 Tilt Angle Adjustment ------------------------------------------------------------------------------------5- 1  
5.2 Brightness Adjustment-----------------------------------------------------------------------------------5- 1  
5.3 Speaker Volume Adjustment---------------------------------------------------------------------------5- 2  
5.4 Key Tone Volume Adjustment -------------------------------------------------------------------------5- 2  
6. GENERAL MAINTENANCE-------------------------------------------------------------------------- 6- 1  
6.1 Cleaning-----------------------------------------------------------------------------------------------------6- 1  
7. TROUBLESHOOTING--------------------------------------------------------------------------------- 7- 1  
1. INTRODUCTION  
EO1-19039  
1.1 Accessories  
1. INTRODUCTION  
Thank you for purchasing the TOSHIBA LKBST-65 Operation Unit.  
This Operation Unit is comprised of a high brightness 12.1-inch color TFT (800x600 dots, 65,536 or 260,000  
colours) with Touch Panel and a keyboard.  
The Operation Unit has been developed exclusive to the TOSHIBA ST-7000 series high-grade POS  
terminal which is designed for specialty store.  
The keyboard unit has a maximum of 40 keys (including numeric keys).  
This manual describes the functions and handling of this unit and should be read carefully to help gain  
maximum performance and life from your unit.  
For most queries please refer to this manual and keep it safe for future reference.  
1.1 Accessories  
Confirm that all the following accessories are contained in the carton. If any accessories are missing or  
damaged, contact your nearest TOSHIBA TEC service representative.  
• RS-232C Dummy (1 pc.)  
• Key Cap Set (1 set)  
(1x1: 18 pcs., 1x2: 3 pcs.)  
• Mode Selector Key Set (1 set)  
REG, MA, X, S keys: 2 keys each  
• Owner’s Manual (1 pc.)  
TEC  
• Double Sems Screw M4x8 (4 pcs.)  
• Bind Screw M3x6 (2 pcs.)  
• Pole (1 pc.)  
1- 1  
2. SPECIFICATIONS  
EO1-19039  
2.1 Basic Specifications  
2. SPECIFICATIONS  
2.1 Basic Specifications  
Item  
Description  
Display  
12.1-inch  
Display Size  
View Area  
248.0 (W) x 186.5 (H) mm  
246.0 (W) x 184.5 (H) mm  
800 (W) x 600 (H) dots  
64K color (65,536 colors) or 260,000 colors  
0.3075 (W) x 0.3075 (H) mm  
Transparency  
Active Area  
Resolution  
Number of Colors  
Dot Pitch  
Display Mode  
Driving Method  
Back light  
TFT  
Fluorescent lamp x 2 pcs. Side light type  
12.1-inch  
Touch Panel  
Panel Size  
View Area  
Active Area  
Mode  
Transparency Rate  
Input Method  
Resolution  
250.0 (W) x 185.5 (H) mm  
243.8 (W) x 181.1 (H) mm  
Analog Resistor film (Grass + PET)  
80% or more  
Finger touch or Pen (See NOTE 1.)  
1024 (W) x 1024 (H)  
Speaker  
The built-in speaker of the LKBST-65 is activated when  
connecting the speaker signal from the control unit (ST-7000  
series) via an interface cable.  
(See NOTE 2.)  
Keyboard  
Number of keys  
Number of Control Locks  
Key Tone  
Max. 40 keys  
Cylinder Lock type: 1 unit (8 positions)  
Key depression: 1 tone  
Alarm: 2 tones (Selectable by the software)  
Adjustable with the control on the bottom of the unit.  
ISO Track 1 & 2 (Option)  
DC12V ±10%, DC5V ±5%  
DC12V: 0.8A, DC5V: 0.6A  
Volume  
Magnetic Card Reader  
Power Supply Voltage  
Current Consumption  
(including 0.1 A for expansion keyboard)  
Power Source  
Operating Temperature  
Humidity  
Dimensions  
Weight  
ST-7000 series  
5 to 35°C  
10 to 90 % (No condensation)  
433 (W) x 239.2 (H) x 165.6 (D) mm (See NOTE 3.)  
Approx. 4.6 Kg  
Body Color  
FW-2 (Fair White-2)  
NOTES: 1. For pen input method, use a pen which meets the following conditions.  
Material: POM (Polyester) Pen top: SR0.8mm  
2. When the built-in speaker of the LKBST-65 is activated, that of the POS terminal does not  
work.  
3. The depth (D) here indicates when the tilt angle is 80°. The height (H) doesn’t include the  
pole length.  
2.2 Options  
The following option kits are available for the LKBST-65. For details, contact your nearest TOSHIBA TEC  
sales representative.  
Option Name  
Magnetic Card Reader  
Stand Kit  
Type  
MCRST-50-3-QM-R  
KITLKBST-56-QM-R  
Description  
ISO, track 1 and 2 type Magnetic Card Reader Kit  
Used to the LKBST-65 for stand type  
2- 1  
3. APPEARANCE  
EO1-19039  
3.1 Front View  
3. APPEARANCE  
3.1 Front View  
LCD Display (with Touch Panel)  
Keyboard  
Magnetic Card Reader  
(Option)  
Brightness Control  
PC Keyboard Interface Connector  
Control Lock  
Speaker Volume Control  
Key Tone Volume Control  
Pole  
Keyboard Interface Cable  
Display Interface Cable  
3- 1  
3. APPEARANCE  
EO1-19039  
3.2 Control Lock and Mode Selector Keys  
3.2 Control Lock and Mode Selector Keys  
Control Lock  
S
MA  
X
3
4
2
5
REG  
1
6
(8)  
(7)  
Mode Selector Keys  
REG  
MA  
X
S
The key can be inserted or removed at Position 1 or 2 of the Control Lock.  
3- 2  
4. SETUP PROCEDURE  
EO1-19039  
4.1 Precautions for Setup  
4. SETUP PROCEDURE  
CAUTION:  
The installation should be performed by an authorized installing dealer. Please contact your nearest  
TOSHIBA TEC representative.  
NOTE: The following option kits are required for connecting the unit to the POS terminal.  
ST-7000-2E/F series:  
ST-7000-1C series:  
KIT-7000-DSP1-QM-R  
KIT-7000-DSP3-QM-R  
4.1 Precautions for Setup  
1. Avoid locations where the unit might get wet. If water or liquids enter the unit, this may cause fire,  
electric shock or damage to the unit.  
2. NEVER connect the unit to other than the TOSHIBA ST-7000 series POS terminal. Doing so may  
damage the unit.  
3. Do not place the unit on unstable, slanted surface, or where it might be subject to vibration, as it may  
drop or fall and cause injury.  
4. Avoid locations where the LCD reflects the direct sunlight or room light, as the LCD may become too  
glaring to see.  
4.2 Setup Procedure  
1. Turn OFF the POS terminal.  
2. Place the unit on a level and stable surface.  
3. Connect the unit to the POS terminal by the Display Interface Cable and Keyboard Interface Cable.  
4. Turn ON the POS terminal.  
5. Adjust the brightness and tilt angle.  
< Rear view of the ST-7000-2E/F series + KIT-7000-DSP1-QM-R >  
LVDS Connector for connecting  
the Display Interface Cable  
PS/2 Connector for connecting  
the Keyboard Interface Cable  
< Rear view of the ST-7000-1C series + KIT-7000-DSP3-QM-R >  
LVDS Connector for connecting  
the Display Interface Cable  
PS/2 Connector for connecting  
the Keyboard Interface Cable  
4- 1  
5. ADJUSTMENT  
EO1-19039  
5.1 Tilt Angle Adjustment  
5. ADJUSTMENT  
Tilt angle, Brightness, Speaker Volume and Key Tone Volume are adjustable on the unit.  
CAUTION:  
1. Be careful not to catch your fingers by tilt unit when changing the display angle.  
2. Do not adjust the tilt angle by holding the LCD panel. Doing so may damage the unit.  
Be sure to hold the LCD Frame.  
5.1 Tilt Angle Adjustment  
The tilt angle is adjustable freely within a range of 40° to 80°.  
80°  
40°  
LCD Frame  
NOTE:  
When adjusting the tilt angle, be sure to hold the LCD Frame.  
5.2 Brightness Adjustment  
The brightness is adjusted with the control provided on the bottom of the unit.  
To make the LCD brighter, turn the control clockwise. To make it darker, turn the control  
counterclockwise.  
Brightness Control  
Bright  
Dark  
5- 1  
5. ADJUSTMENT  
EO1-19039  
5.3 Speaker Volume Adjustment  
5.3 Speaker Volume Adjustment  
The speaker volume is adjustable with the speaker volume control on the left of the rear cover as shown  
below. Adjust the volume with a small Phillips head screwdriver. Clockwise turn will turn up the volume and  
counterclockwise turn will turn down the volume.  
NOTES: 1. Before adjusting the speaker volume, fully turn the speaker volume control on the front  
of the ST-7000 clockwise.  
2. Select either the speaker of the ST-7000 series or that of the LKBST-65. When the  
speaker of the ST-7000 series is selected, the volume cannot be adjusted on the  
LKBST-65.  
Speaker Volume Control  
5.4 Key Tone Volume Adjustment  
The key tone volume control is provided on the right of the rear cover as shown below. Adjust the volume  
with a small Phillips head screwdriver. To turn up the volume, turn the control clockwise. To turn down,  
turn it counterclockwise.  
Key Tone Volume Control  
5- 2  
6. GENERAL MAINTENANCE  
EO1-19039  
6.1 Cleaning  
6. GENERAL MAINTENANCE  
6.1 Cleaning  
WARNING!  
1. Be sure to disconnect the power cord of the POS terminal prior to performing any maintenance.  
2. Do not pour water directly on or wipe the LCD with a soaked cloth, as this may cause fire, electric  
shock, or machine failure.  
CAUTION!  
1. Never use a solvent like thinners or benzene for cleaning. Using such solvents may discolor the  
covers.  
2. Do not use any sharp object to clean the LCD display. Doing so may cause an LCD display  
failure.  
3. Do not insert nozzle of an air blower into the magnetic card reader slot. Doing so may damage  
the scanning head, resulting in the magnetic card reader failure.  
To help retain the high quality and performance of your unit, it should be cleaned regularly. The  
greater the usage on the machine, the more frequent the cleaning. (i.e. low usage = weekly : high  
usage = daily)  
Cleaning the LCD  
Clean the surface of the LCD display with a soft dry cloth or with an electrostatic free cleaner for  
automated office equipment.  
Cleaning the Covers  
Wipe the covers with a soft dry cloth or soft cloth slightly moistened with mild detergent. After using  
detergent for cleaning, be sure to wipe it off with a slightly moistened cloth.  
Cleaning the Magnetic Card Reader (Option)  
Remove any dust from the slot of the magnetic card reader with an air blower. To clean the card  
reader head, use a head cleaning card available on the market.  
6- 1  
7. TROUBLESHOOTING  
EO1-19039  
7. TROUBLESHOOTING  
7. TROUBLESHOOTING  
WARNING!  
If you cannot solve a problem with the following solutions, do not attempt to repair it yourself.  
Turn the power OFF, unplug the POS terminal, then contact your TOSHIBA TEC representative for  
assistance.  
Problem  
Check Point  
Solution  
The unit does not turn on  
by turning on the POS  
terminal.  
Are the cables connected  
properly?  
Properly connect the display interface  
cable again.  
Is the power supplied to the  
POS terminal?  
Turn the POS terminal power switch to on.  
The LCD display is hard to  
see.  
Does the LCD display reflect  
sunlight or room light?  
Is the brightness adjusted  
properly?  
Refer to Page 5-1 and adjust the display  
tilt angle.  
Refer to page 5-1 and adjust the  
brightness properly.  
The speaker of unit does  
not sound or sounds too  
soft.  
Has the volume of the POS  
terminal been fully turned  
up?  
Turn up the volume of the POS terminal  
fully.  
Has the volume of the  
LKBST-65 been properly  
adjusted?  
Refer to page 5-2 and adjust the volume of  
the LKBST-65 properly.  
Magnetic Card Reader  
does not read the data.  
Does the used card comply  
with the standard?  
Is the card reading direction  
correct?  
Use Track 1 and 2 complying with ISO.  
Insert the card so that the magnetic strip  
faces the scanning head.  
Are the other cards read  
correctly?  
If other cards are read correctly, the card  
itself may be wrong. (a low-magnetic card,  
scratches, etc.) If other cards are also not  
read, the magnetic card reader itself may  
be wrong. Then, contact the nearest  
TOSHIBA TEC representative for  
assistance.  
7- 1  
English  
Waste Recycling information for users:  
Following information is only for EU-member states:  
The crossed out wheeled bin symbol is used to indicate that the product must not be treated as general household waste.  
By ensuring that this product is disposed of correctly you will be helping to prevent potentially negative consequences for  
the environment and human health, which could otherwise be caused by incorrect waste handling of this product.  
For more detailed information about the take-back and recycling of this equipment, please contact the supplier that  
provided you with the product in question.  
French  
Information aux utilisateurs concernant le recyclage des déchets:  
Les informations suivantes sont uniquement destinées aux pays membres de l’Union Européenne:  
L’utilisation du symbole de "poubelle à roulettes barrée" indique que ce produit ne doit pas être traité comme un déchet  
ménager classique.  
En vous assurant que ce produit est correctement mis au rebut, vous participerez à la prévention de l’environnement et  
de la santé publique, contre des conséquences négatives potentielles qui pourraient résulter d’un traitement inapproprié  
des déchets de ce produit. Pour obtenir des informations complémentaires concernant la récupération et le recyclage de  
ce produit, veuillez contacter le fournisseur auprès duquel vous avez acheté le produit.  
German  
Wiederverwertungsinformationen für Verbraucher:  
Die folgenden Informationen gelten nur für EU-Mitgliedsstaaten:  
Das durchgestrichene Mülltonnensymbol weist darauf hin, dass dieses Produkt nicht wie allgemeiner Haushaltsmüll  
behandelt werden darf.  
Indem Sie aktiv mitwirken, dieses Produkt ordnungsgemäß zu entsorgen, helfen Sie mit, mögliche negative  
Auswirkungen auf die Umwelt sowie die menschliche Gesundheit zu vermeiden, die sonst durch die unsachgemäße  
Entsorgung dieses Produktes beeinträchtigt werden könnten.  
Für nährere Informationen zur Rücknahme und Wiederverwertung dieses Produktes wenden sie sich bitte an den  
Lieferanten, von dem Sie dieses Produkt erworben haben.  
Spanish  
Información para usuarios sobre el reciclaje de residuos:  
La siguiente información sólo concierne a los Estados Miembros de la UE:  
El uso del símbolo de un contenedor con ruedas tachado indica que este producto no puede ser tratado como si fuera  
un residuo doméstico.  
Asegurando que nos deshacemos de este producto de forma correcta, ayudaremos a evitar potenciales consecuencias  
negativas tanto para el medio ambiente como para la salud pública, que podrían producirse debido a un tratamiento  
inapropiado de este producto. Para obtener una información más detallada sobre la recogida y reciclaje de su producto,  
por favor, póngase en contacto con el proveedor donde lo compró.  
Dutch  
Gebruikersinformatie over het recycleren van afval:  
De volgende informatie geldt enkel in EU-lidstaten:  
Het symbool met de doorkruiste afvalbak geeft aan dat dit product niet mag worden behandeld als algemeen  
huishoudelijk af val.  
Door dit product op de juiste manier van de hand te doen beschermt u het milieu en de volksgezondheid tegen mogelijke  
negatieve gevolgen, die anders zouden kunnen voortvloeien uit het onjuist verwerken van de resten van dit product.  
Voor gedetailleerde informatie over het terugnemen en recycleren van dit product, gelieve contact op te nemen met de  
leverancier van dit product.  
Italian  
Informazioni sul riciclo del prodotto:  
Le seguenti informazioni riguardano gli stati membri EU:  
Il simbolo con il bidone sbarrato indica il non poter smaltire questo prodotto come rifiuto domestico.  
L'accertamento che questo prodotto sia smaltito correttamente contribuirà ad impedire le potenziali conseguenze  
negative per l'ambiente e la salute umana che potrebbero essere causati, al contrario, dall'errato smaltimento dello  
stesso. Per informazioni più dettagliate sulle modalita di resa e riciclaggio di questo prodotto mettetevi in contatto con il  
fornitore da cui l'avete aquistato.  
Portuguese  
Informação sobre reciclagem:  
A informação que se segue é apenas dirigida a países membros da CEE:  
A utilização deste símbolo indica que este produto não pode ser tratado como lixo comum.  
Ao assegurar-se que este produto é tratado correctamente está a ajudar a prevenir potenciais consequências negativas  
para o ambiente e para a saúde humana, que poderiam ser causadas pelo inapropriado tratamento deste produto.  
Para mais informação sobre a reciclagem e tratamento deste produto, contacte o seu fornecedor.  
PRINTED IN JAPAN  
EO1-19039  
E

Winegard Cell Phone Accessories TN 2033 User Manual
SPT BREAKFAST MAKER BM 1107 User Manual
Sony Mobile Xperia T Smartphone 12728675 User Manual
Sony Ericsson XR C7500RX User Manual
Seagate MOMENTUS ST905003N1A1ASRK User Manual
Samsung SN 324 User Manual
Pioneer PD F407 User Manual
Pioneer FH P6200 User Manual
Pioneer DEH P43 User Manual
Philips AX1101 User Manual