The Singing Machine SMVG 600 User Manual

SMVG-600  
â
COMPACT DISC + GRAPHICS  
WITH BUILT-IN TV KARAOKE CENTER  
OWNER’S MANUAL  
Please read before using this unit.  
The Singing Machineâ is a registered trademark of The Singing Machine Co., Inc.  
IMPORTANT SAFETY INSTRUCTIONS  
1. Read Instructions - All the safety and operating instructions should be read before  
the product is operated.  
2. Retain Instructions - The safety and operating instructions should be retained for  
futurereference.  
3. Heed Warnings - All warnings on the product and in the operating instructions should  
beadheredto.  
4. Followinstructions-Alloperatinganduseinstructionsshouldbefollowed.  
5. Cleaning - Unplug this product from the wall outlet before cleaning. Do not use liquid  
cleaners or aerosol cleaners. Use a damp cloth for cleaning the exterior only. Do NOT  
attempttocleantheinside.  
6. Attachments- Do not use attachments not recommended by the product manufacturer as  
theymaycausehazards.  
7. Water and Moisture - Do not use this product near water - for example, near a bath tub,  
wash bowl, kitchen sink, or laundry tub; in a wet basement, or near a swimming pool,  
andthelike.  
8. Accessories - Do not place this product on an unstable cart, stand tripod, bracket, or  
table. The product may fall, causing serious injury to a child or adult, and serious  
damage to the product. Use only with a cart, stand, tripod, bracket, or table  
recommended by the manufacturer, or sold with the product. Any mounting of the  
product should follow the manufacturer's instructions, and should use a mounting  
accessory recommended by the manufacturer.  
9. A product and cart combination should be moved with care. Quick stops, excessive force,  
andunevensurfacesmaycausetheapplianceandcartcombinationtooverturn.  
10. Ventilation - Slots and openings in the cabinet are provided for ventilation and to  
ensure reliable operation of the product and to protect it from overheating, and these  
openings must not be blocked or covered. The openings should never be blocked by  
placing the product on a bed, sofa, rug, or other similar surface. This product should  
not be placed in a built-in installation such as a bookcase or rack unless proper ventilation  
isprovided.  
11. Power Sources - This product should be operated only from the type of power source  
indicated on the marking label. If you are not sure of the type of power supply to  
your home, consult your product dealer or local power company. For products intended to  
operatefrombatterypower, orothersources, refertotheoperatinginstruction.  
2
IMPORTANT SAFETY INSTRUCTIONS  
12. Grounding or Polarization - This product may be equipped with a polarized  
alternating current line plug (a plug having one blade wider than the other). This  
plug will fit into the power outlet only one way. This is a safety feature. If you are unable to  
insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit,  
contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose  
ofthepolarizedplug.  
Alternate Warnings - This product may be equipped with a three-wire grounding-type  
plug, a plug having a third (grounding) pin. This plug will only fit into a grounding-type  
power outlet. This is a safety feature. If you are unable to insert the plug into the outlet,  
contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose  
ofthegrounding-typeplug.  
13. Power-Cord Protection - Power supply cords should be routed so that they are  
not likely to be walked on or pinched by items placed upon or against them, paying  
particular attention to cords at plugs, convenience receptacles, and the point where they  
exit from the product.  
14. Protective Attachment Plug - The product is equipped with an attachment plug  
having overload protection. This is a safety feature. See Instruction Manual for  
replacement or resetting of protective device. If replacement of the plug is required,  
be sure the service technician has used a replacement plug specified by the  
manufacturerthathasthesameoverloadprotectionastheoriginalplug.  
15. Outdoor Antenna Grounding - If an outside antenna is connected to the receiver,  
be sure the antenna system is grounded so as to provide some protection against  
voltage surges and built-up static charges. Article 810 of the National Electrical Code,  
ANSI/NFPA 70, provides information with regard to proper grounding of the mast and  
supporting structure, grounding of the lead-in wire to an antenna-discharge unit, size of  
grounding conductors, location of antenna-discharge unit, connection to grounding  
electrodes, andrequirementsforthegroundingelectrode. Seefigure:  
ANTENNA  
LEAD IN  
WIRE  
GROUND  
CLAMP  
ANTENNA  
DISCHARGE UNIT  
(NEC SECTION 810-20)  
ELECTRIC  
SERVICE  
EQUIPMENT  
GROUNDING CONDUCTORS  
(NEC SECTION 810-21)  
GROUND CLAMPS  
POWER SERVICE GROUNDING  
ELECTRODE SYSTEM  
(NEC ART 250. PART H)  
NEC-NATIONAL ELECTRICAL CODE  
S2898A  
3
IMPORTANT SAFETY INSTRUCTIONS  
16. Lightning - For added protection for this product during a lightning storm, or when it is left  
unattended and unused for long periods of time, unplug it from the wall outlet and  
disconnect the antenna or cable system. This will prevent damage to the product due to  
lightningandpower-linesurges.  
17. Power Lines - An outside antenna system should not be located in the vicinity of  
overhead power lines or other electric light or power circuits, or where it can fall into  
such power lines or circuits. When installing an outside antenna system, extreme  
care should be taken to keep from touching such power lines or circuits as contact  
withthemmightbefatal.  
18. Overloading - Do not overload wall outlets, extension cords, or integral  
conveniencereceptaclesasthiscanresultinariskoffireorelectricshock.  
19. Object and Liquid Entry - Never push objects of any kind into this product through  
openings as they may touch dangerous voltage points or short-out parts that could result  
in a fire or electric shock. Never spill liquid of any kind on the product.  
20. Servicing - Do not attempt to service this product yourself as opening or removing  
covers may expose you to dangerous voltage or other hazards. Refer all servicing  
toqualifiedservicepersonnel.  
21. Damage Requiring Service - Unplug this product from the wall outlet and refer  
servicingtoqualifiedservicepersonnelunderthefollowingconditions:  
a) Whenthepower-supplycordorplugisdamaged,  
b) Ifliquidhasbeenspilled, orobjectshavefallenintotheproduct,  
c) Iftheproducthasbeenexposedtorainorwater,  
d) If the product does not operate normally by following the operating instructions. Adjust  
only those controls that are covered by the operating instructions as an improper  
adjustment of other controls may result in damage and will often require extensive  
workbyaqualifiedtechniciantorestoretheproducttoitsnormaloperation.  
e) Iftheproducthasbeendroppedordamagedinanyway, and  
f ) When the product exhibits a distinct change in performance - this indicates a need for  
service.  
22. Replacement Parts - When replacement parts are required, be sure the service  
technician has used replacement parts specified by the manufacturer or have the  
same characteristics as the original part. Unauthorized substitutions may result in  
fire, electricshock, orotherhazards.  
23. Safety Check - Upon completion of any service or repairs to this product, ask the  
service technician to perform safety checks to determine that the product is in proper  
operatingcondition.  
24. Wall or Ceiling Mounting - The product should be mounted to a wall or ceiling only as  
recommendedbythemanufacturer.  
25. Heat - The product should be situated away from heat sources such as radiators,  
heat registers, stoves, or other products (including amplifiers) that produce heat.  
26. Nonuse Periods - Unplug the product’s power cord when you will not use it for an  
extendedperiod.  
4
THE SINGING MACHINE KARAOKE GLOSSARY OF TERMS  
In addition to all of the terminology associated with consumer electronics products, a few  
additional terms are used almost exclusively in karaoke. These terms are meant to familiarize  
you with the world of Karaoke. The features listed below may not necessarily pertain to the  
particular model Singing Machine that you have. The following are some brief explanations of  
karaoketerms:  
Echo:  
Echo adds depth and resonance to a singer's voice without affecting the music. This echo is  
producedbycreatingminorcontrolledfeedbackinthesinger'svoice.  
Multiplex:  
Our multiplex recordings contain 2 copies of the same song. One version is a stereo recording of  
the song without the lead singer. The second version is recorded with the music and  
background vocals on the left channel and the lead singer recorded on the right channel. This  
‘split track’ recording allows you to control the volume of the lead singer by adjusting the balance  
control. You can sing a duet with the lead singer or use the lead singer as a guide as you learn  
the song, gradually fading them out with the balance control until you are able to sing the song  
onyourown.  
AutoVoiceControl(AVC):  
When the AVC function is activated, the vocals on a multiplex recording are eliminated as soon  
as the singer begins singing into the microphone. When the singer stops singing, the vocals on  
the multiplex recording are automatically re-activated. This useful function is used primarily  
during practice sessions while a singer is learning a song. Please note that the AVC function  
onlyworkswithmultiplexrecordingandnotwithstandardaudiorecordings.  
PitchControl:  
This function controls pitch of music by controlling the speed at which a cassette tape plays  
back. By increasing the speed of the tape, the music sounds higher (sharp). By slowing the tape  
speed, themusicsoundslower(flat).  
KeyController:  
Key Controller changes the key of the CD/CDG music (+ or - steps) to adjust to the singer’s  
voice.  
CDG:  
This is an acronym for Compact Disc plus Graphics. You will also see variations CD+G, and  
CD+Graphics. This is a regular audio CD with information stored on a data track simultaneous  
to music. In laymen's terms, CDG has a video output for simple graphics (not full motion video).  
In the case of karaoke, the graphics function is used to store song lyrics, and display the lyrics in  
synch with music. In most cases, CDG software displays lyrics which change color as they are  
to be sung. A regular television is all that is required to display CDG lyrics.  
NOTE - CDG is a particular type of compact disc encoding system that is different from VCD or  
DVD. Your Singing Machine can decode standard audio compact discs and CDG discs. It will  
notreadVCDorDVDencodeddiscs.  
Standard audio discs and cassette tapes will not display lyrics on your TV. Audio CDs do not  
containthesoftwarenecessarytodisplaylyrics.  
5
INTRODUCTION  
YourSMVG-600 Compact Disc +Graphics with  
will provideyou withmany years  
of fun and entertainment. It can let you be the “star” as you sing along with your favorite  
recordingsandhearyourvoicewiththemusicthroughthesystem’sspeakers.  
This Karaoke Center is easy to use, yet full of features with a compact design. After just a few  
simple instructions, you will become an expert. Before you use your SMVG-600, please glance  
through this manual to familiarize yourself with all the features available and the sections of the  
manual that describe their operation. Next, go to the section for the specific operation you wish  
toperform.  
Foryoureasyreference, listedherearesomeofthemainfeaturesofthisKaraokeCenter:  
LyricsonTVscreen-displaysthelyricswiththetempoofmusicwhenplayingCD+Gdiscs.  
Auto Voice Control- lets you replace the original singer's voice with your own voice when any  
prerecorded, multiplex karaoke disc or tape is played. To activate, just rotate Mic Volume to a  
comfortable listening level, and Auto Voice Control for the best balance between playback and  
microphonelevels.  
Balance Control - lets you adjust the balance between the prerecorded original singer's voice  
andthemusicifyouuseamultiplexkaraokedisc.  
EchoControl-letsyouaddanechotoenrichyourvoiceforaconcerthalleffect.  
Master Volume Control- lets you turn the volume control clockwise or counter-clockwise until  
desiredvolumelevelisobtained.  
-liftup camera lens todisplay your image onTheSinging Machine’smonitor.  
Built-InSpeaker-letsyousharethemusicwithyourfamilyorfriends.  
Auxiliary Output Jacks - lets you connect another audio output component, such as an  
equalizer/boosteroraPAsystem.  
6
CONTROL LOCATIONS  
1
2
3
4
5
6
7
8
9
10  
11  
17  
18  
19  
20  
12  
13  
14  
15  
21  
16  
22 23  
24 25  
26  
27  
FRONT VIEW  
1. CAMERA Lens  
2. VIDEO OUT Selector  
(CAMERA/CDG/AUX)  
3. CD Tray  
4. MONITOR  
5. A.V.C. Control (Auto Voice Control)  
6. MASTER Volume Control  
7. BALANCE Control  
14. PROGRAM Button  
15. REPEAT Button  
16. INTRO Button  
17. ECHO Control  
18. CD Tray OPEN/CLOSE Button  
19. Loudspeaker  
20. PLAY/PAUSE Button  
21. STOP Button  
8. MIC Volume Control  
9. MONITOR Selector  
(CAMERA/CDG/AUX/OFF)  
10. POWER Button  
11. POWER On Indicator  
12. AUDIO Selector (CDG/AUX)  
13. Loudspeaker  
22. PROGRAM Indicator  
23. REPEAT Indicator  
24. SKIP Buttons  
25. LED Display  
26. CDG Indicator  
27. PLAY/PAUSE Indicator  
7
CONTROL LOCATIONS  
28  
29  
SIDE VIEW  
28. MIC 1 Jack  
29. MIC 2 Jack  
34  
35  
30  
31  
36  
37  
32  
33  
38 39  
REAR VIEW  
30. BRIGHTNESS Control  
31. CONTRAST Control  
32. VIDEO IN Jack  
33. VIDEO OUT Jack  
34. AUX OUT Jack (L)  
35. VERTICAL HOLD Control  
36. AUX IN Jack (L)  
37. DC Jack (DC 16V)  
38. AUX OUT Jack (R)  
39. AUX IN Jack (R)  
8
MAKING THE CONNECTIONS  
CONNECTINGPOWER  
YoucanpowerthesystemfromastandardACoutletbyusingthesuppliedAC-DCadapter.  
CAUTION: The adapter must be connected to the power voltage which is the same as the local  
area. Ifnot, thereisadangerofBURNINGtheunitthatcausesafire.  
DC 16V  
Adapter  
ForUKonly  
CAUTION: The adapter is designed to operate from a main supply of 230V AC~50Hz. The unit  
is fitted with a 13amp (BS 1363) main plug. Should the fuse in the main plug require replacing a  
3amp (BS 1363) fuse must be fitted. Ensure the voltage of your electrical power supply  
matchesthoseindicatedontheratinglabellocatedonthetopoftheadapter.  
If the socket outlets in your home are not suitable for the plug supplied with the unit, the plug  
shouldberemovedandanappropriateonefitted.  
CONNECTINGTOYOURTV  
The Singing Machine provides a patch cord to give you the option of connecting your  
SMVG-600 to an external audio/sound system and video device. The patch cord has three RCA  
jacks at each end. White and Red are for left and right audio connections and the Yellow is for  
connectingthevideo.  
Make sure that you have a CDG disc in the Singing Machine and playing when you are making  
this connection. You will know you have the proper settings on your TV or VCR as soon as you  
seetheSingingMachinelogoorlyricsonthescreen!  
9
MAKING THE CONNECTIONS  
VIDEOCONNECTION(forTV)  
PleasefollowthestepsbelowtodisplayCDGlyricsontheTVscreen:  
(1) Locatethemulticoloredpatchcords.  
(2) ConnectVideoCable(yellow)totheVideoOutofthebackoftheSingingMachine.  
(3) Connect the other end of the Video Cable (yellow) to the Video Input on your TV or  
VCR.  
REAR VIEW OF  
SINGING MACHINE  
REAR VIEW OF TV  
R
L
VIDEO IN AUX OUT AUX IN  
L
L
VIDEO IN  
AUDIO IN  
R
R
VIDEO OUT  
VIDEO INPUT  
(Yellow Jack)  
VIDEO OUTPUT  
(Yellow Jack)  
VIDEOCONNECTION(forVCRrecording)  
PleasefollowthestepsbelowtorecordCDGlyricsorimageontheVCR:  
(1) Locatethemulticoloredpatchcords.  
(2) ConnectVideoCable(yellow)totheVideoOutofthebackoftheSingingMachine.  
(3) Connect the other end of the Video Cable (yellow) to the Video Input on your  
VCR.  
REAR VIEW OF  
SINGING MACHINE  
REAR VIEW OF VCR  
R
L
VIDEO IN AUX OUT AUX IN  
L
L
VIDEO IN  
AUDIO IN  
R
R
VIDEO OUT  
AUX OUT  
AUX IN  
(white Jack)  
(white Jack)  
AUX OUT  
(Red Jack)  
AUX IN  
(Red Jack)  
VIDEO INPUT  
(Yellow Jack)  
VIDEO OUTPUT  
(Yellow Jack)  
10  
MAKING THE CONNECTIONS  
If your television or VCR does not have the required Video Input, you will need an RF Modulator  
(Radio Frequency Modulator), which connects through your TV Antenna or cable line and  
serves as Video Input.  
An RF Modulator can be purchased at almost any consumer electronics retailer. If you are  
connecting the video from the Singing Machine to either a television or a VCR video input jack,  
you must specify the source the TV or VCR is to display.Your TV or VCR user guide can tell you  
howtodisplaythevideosignalfromtheVideoInjack.  
If you don’t have the manual for your TV or VCR, we suggest calling the TV or VCR,  
manufacturer’s customer service department. Only the manufacturer will be able to tell you very  
quickly how to configure your TV or VCR to display the video signal coming from the ‘Video  
Inputjack.  
D Note: Some projection TV sets do not properly display the standard blue background when  
using most CDGs. If the background color is inconsistent or flashing, please try connecting your  
SingingMachinetoastandardtubetelevision.  
COMMONWAYSTOCONFIGUREYOURTVORVCR  
Your Singing Machine is designed to connect to your TV the same way you would connect a  
video camera, VCR or video game. The Singing Machine is constantly sending the video and  
audio signals to the 'Video Out' and 'AUX OUT' jacks whenever you play a CDG. So, load a CDG  
into your Singing Machine before you start making these connections. You will see lyrics on the  
TVscreenassoonasyougetthesetupcompletedcorrectly.  
We refer to TV/VCR because manufacturers use very similar ways to connect TVs and VCRs  
and you can connect your Singing Machine to a TV, VCR or satellite system (contact your  
satellite company for instructions). The setup of your TV/VCR is the most difficult part of making  
the connection for displaying your Singing Machine lyrics. In most homes, the TV has either a  
cable connected or antennae in use. Once you connect your Singing Machine to the TV/VCR,  
you must 'tell' your TV/VCR to display the input from the Singing Machine instead of the usual  
inputfromthecableorantennae.  
Check your TV/VCR user manual for the easiest way to setup your particular entertainment  
system. If you don't have your manual you can always call your TV/VCR manufacturer for that  
information or try hitting their website for online assistance. We've listed below the most  
commonwaysofsettingupaTV/VCR:  
(1) In the setup menu for configuring the TV/VCR there may be an option on 'Input Selection'  
whereyoumaychoosebetween'Cable/Ant.', 'Video1', or'Video2'etc. astheinputsource.  
(2) Try looking for a 'Video' channel between the highest channel and the lowest channel on  
yourTVorVCR. (i.e. Between99and2maybe'VIDEO'or'INPUT'or'GAME')  
(3) Look for a button on the remote control for the TV/VCR you are connecting to that says  
'VIDEO', 'VIDEO 1', 'Game', 'AUX', 'EXT', 'LINE1', 'LINE-IN' or occasionally the 'VCR'  
buttonwilldisplaytheVideoinputsource.  
11  
MAKING THE CONNECTIONS  
CONNECTINGAVIDEOCOMPONENTFORINPUT  
Please follow the steps below to display CDG lyrics on the Singing Machine’s monitor from  
anothervideosource:  
(1) Locate the multicolored patch cords.  
(2) ConnectVideoCable(yellow)totheVideoInofthebackoftheSingingMachine.  
(3) Connect the other end of the Video Cable (yellow) to the Video Output on another video  
sourcesuchasaVCR.  
(4) Set the MONITOR Selector to AUX mode and theAUDIO Selector to AUX mode.  
(5) Adjust the BRIGHTNESS, CONTRAST and VERTICAL HOLD Controls at the back of  
the Singing Machine to have the best picture quality.  
REAR VIEW  
OF VIDEO SOURCE  
REAR VIEW OF  
SINGING MACHINE  
R
L
VIDEO IN AUX OUT AUX IN  
L
L
VIDEO OUT  
AUDIO OUT  
R
R
VIDEO OUT  
VIDEO OUTPUT  
(Yellow Jack)  
VIDEO INPUT  
(Yellow Jack)  
AUDIO CONNECTION  
Connect the SMVG-600 to your TV or home stereo system using the White and Red  
connections on the supplied patch cord. Plug the white end of the patch cord into the white AUX  
OUT jack on the SMVG-600. Plug the red end of the patch cord into the red AUX OUTjack on  
SMVG-600. Now connect the other end of the cable’s white (left channel) and red (right channel)  
plugstoyourTVorhomestereosystem’sAUDIOINorAUXINjacks.  
REAR VIEW OF  
SINGING MACHINE  
REAR VIEW OF TV  
R
L
AUX IN  
AUX OUT  
L
L
VIDEO IN  
AUDIO IN  
R
R
AUX OUTPUT  
L
(White Jack)  
AUX OUTPUT  
R
(Red Jack)  
AUDIO INPUT AUDIO INPUT  
R
(Red Jack) (White Jack)  
L
12  
MAKING THE CONNECTIONS  
CONNECTING AN AUDIO COMPONENT FOR INPUT  
To connect another audio source (such as a Tuner, an AV Receiver or a VCR) so you can sing  
along with its music, simply connect the Audio Output jacks (Red & White RCA jacks) to the  
Singing Machine’s AUX IN L & R jacks.  
REAR VIEW OF  
SINGING MACHINE  
ANOTHER  
AUDIO COMPONENT  
R
L
AUX IN  
AUX OUT  
L
L
VIDEO OUT  
AUDIO OUT  
R
R
AUX INPUT  
R
(Red Jack)  
AUX INPUT  
L
(White Jack)  
AUDIO OUTPUT AUDIO OUTPUT  
R
(Red Jack)  
L
(White Jack)  
MONITOR Selector  
! To play a CDG disc, set the MONITOR Selector to either CAMERA, CDG or OFF mode.  
! To play another audio component, set the MONITOR Selector to AUX mode.  
! To display CDG lyrics on the Singing Machines monitor, set the MONITOR Selector to CDG  
mode.  
! To display your image on the Singing Machine’s monitor, set the MONITOR Selector to  
CAMERAmode.  
! ToturnoffthemonitorontheSingingMachine, settheMONITORSelectortoOFFmode.  
! Adjust the BRIGHTNESS, CONTRAST and VERTICAL HOLD Controls at the back of the  
Singing Machine to have the best picture quality.  
VIDEO OUT Selector  
! To display image on the TV, set the VIDEO OUT Selector to CAMERA mode.  
! To display CDG lyrics on the TV, set the VIDEO OUT Selector to CDG mode.  
! To display image on theTV from another video source, set the VIDEO OUT Selector to AUX  
mode.  
AUDIO Selector  
! To listen to music from your SMVG-600, set AUDIO Selector to CDG mode.  
! To listen to music from another audio component, set the AUDIO Selector toAUX mode.  
13  
CD OR CD+G OPERATION  
*Warning - Tapping or dropping the microphone while it is on can permanently damage  
your microphone. Resist the urge to swing the microphone around by the cord!  
PREPARATION  
! This unit is designed to play CD’s bearing the identification logo "  
conformtotheCDstandard, theymaynotplayproperly.  
". If CD’s do not  
! Fingerprints and dust should be carefully wiped off with a soft cloth. Wipe in a straight motion  
fromthecenterofthedisctotheoutsideedge.  
! Never use chemicals, such as record cleaning sprays, antistatic sprays or fluids, benzene or  
thinner to clean compact discs. These chemicals will permanently damage the plastic  
surfaceofthedisc.  
! Always place the compact disc on the disc tray with the label facing upward. Compact discs  
canbeplayedononlyoneside.  
! To remove a disc from its storage case, press down on the center of the case and lift the disc  
out, holdingitcarefullybytheedges.  
! Discsshouldbereturnedtotheircasesafterusetoprotectthemfromdustandscratches.  
! To prevent warping the disc, do not expose it to direct sunlight, high humidity or high  
temperaturesforextendedperiodsoftime.  
! Do not apply paper or write anything on either side of the disc. The inks used in some felt-tips  
pensmaydamagethesurfacesofthedisc.  
PLAYINGCDORCD+GDISC  
Reminders:  
! Adjust MASTER VOLUME control on your SMVG-600, TV or audio system to a comfortable  
level.  
! Adjust MIC/ECHO/BALANCE controls as needed to achieve the desired mix of music and  
vocalsthroughyourTVorsoundsystem.  
! Never place anything except a compact disc on the disc tray. Foreign objects can damage  
the unit.  
! Only place one disc on the disc tray at a time.  
TURNING POWER ON/OFF  
! To turn on the Karaoke center, press the POWER button. The POWER ON LED Indicator will  
light up.  
! To turn off the system, press the POWER button again. The POWER ON LED Indicator will  
turn off.  
MONITOR SELECT  
! To play a CD+G, setMONITOR Selector to either CAMERA, CDG or OFF mode.  
! To display the CDG lyrics on the Singing Machine’s monitor, set MONITOR Selector to CDG  
mode.  
! ToturnoffthemonitorontheSingingMachine, setMONITORSelectortoOFFmode.  
! Adjust the BRIGHTNESS, CONTRAST and VERTICAL HOLD Controls at the back of the  
Singing Machine to have the best picture quality.  
AUDIO SELECT  
! Set the AUDIO Selector to CDG mode. When using CDG.  
LOADINGADISC  
! Press CD TRAYOPEN/CLOSE button to open CD drawer. Place a disc in the drawer with the  
printedsidefacingupwardandtheshinysidefacingdown.  
! Press the CD Tray OPEN/CLOSE button again to close the CD drawer. The LED window will  
displaytotalnumberoftracks. (Ifnodiscisloaded, itwilldisplay )  
(Refer to the Trouble Shooting Guide on page 17 if a disc is loaded but the total tracks do  
not appear.)  
14  
CD OR CD+G OPERATION  
PLAY/PAUSEMODE  
! To start playing, press the PLAY/PAUSE button, the first track [ ] and the PLAY/PAUSE  
LED Indicator will be displayed.  
! To temporarily stop playing, press the PLAY/PAUSE button, the PLAY/PAUSE LED Indicator  
willflash.  
! Toresumeplay, pressthisbuttonagain.  
PLEASE NOTE: Pressing pause when a CDG is playing may cause distorted lyrics on the  
monitor. Any distortion will remain until the whole screen is refreshed during  
an instrumental break or you stop the song and start it from the beginning.  
STOP MODE  
If the STOP button is pressed in the course of playing, the disc will cease to play. (The total  
number of tracks will be shown on the LED window).  
SKIP PLAY(For both CD and CDG discs)  
! During STOP mode, you can skip up or down to your desired track number by pressing the  
SKIPbutton(  
-SKIP-  
).  
! To resume playing the selected song, press PLAY/PAUSE button.  
SEARCH (For audio CD disc only)  
When playing any audio CD, press and hold the SKIP button (  
-SKIP-  
), the CD will  
search at high speed in the forward or backward direction. Normal play will continue when you  
release the button.  
REPEAT PLAY  
! To repeat the track currently playing, press the REPEAT button once, the REPEAT LED  
Indicator will flash, then press the PLAY/PAUSE button.  
! To repeat all tracks, press the REPEAT button twice, the REPEAT LED Indicator will light up.  
Press the PLAY/PAUSE button to begin.  
! To clear the repeat function. Press the REPEAT button again, the REPEAT LED Indicator will  
turn off.  
PROGRAM PLAY  
! Use the PROGRAM button to program and play back songs in a pre-selected order.  
! Programming should be done in the STOP mode only. Press the PROGRAM button once  
then the PROGRAM LED flashes, number [  
- SKIP -  
] will also display. Press SKIP buttons  
) to select a desired track and press the PROGRAM button to confirm entry.  
(
You can repeat the same steps up to a maximum of 19 tracks.  
! Press PLAY/PAUSE button when you have completed programming and you are ready to  
start singing.  
! To clear all the programmed memories, press STOP button.  
INTRO PLAY  
! Press the INTRO button once, then press PLAY. The CD player will play up to 10 seconds of  
each track as an introduction.  
! Press the INTRO button again to stop intro scan play.  
Note: The first few seconds of most tracks is silence.  
15  
CARE AND MAINTENANCE  
POWER SWITCH  
After using the SMVG-600, turn off the power  
by pressing the POWER button.  
CLEANING DISC  
Cleaning will not normally be necessary.  
However, should fingerprints, dust or  
dirt appear, you can wipe them off with a  
soft, lint-free cloth. Wipe the disc in a  
straight line from center to edge. You  
can moisten the disc first with ordinary  
tap water if necessary.  
CLEANING THE UNIT  
To clean the exterior of the unit, simply wipe  
with a soft clean cloth moistened with plain  
lukewarmwater.  
CLEANING THE CD LASER LENS  
For Best Results: Use a CD-lens cleaning  
disc according to the cleaning disc  
manufacturerinstructions.  
To prevent fire or shock hazard,  
disconnect your stereo system  
from the AC power plug when  
cleaning.  
N O T E : D o n o t u s e t h e  
d e t e r g e n t o r a b r a s i v e  
cleaning agents, for they can  
damage the disc.  
COMPACT DISC  
Handling Disc  
CD PLAYER  
The player mechanism is fitted with self-  
lubricating bearing and must not be  
oiled or greased.  
Although the music tracks in the disc are  
covered with a protective layer, it is still  
advisable to treat the disc carefully.  
Ensure that you always pick up discs by  
the edge, and put them back in their  
holders immediately after use.  
16  
TROUBLE SHOOTING GUIDE  
If you have followed the instructions and are having difficulty operating the unit, locate the  
PROBLEM in the left column below. Check the corresponding POSSIBLE CAUSE column to  
locateandremedytheproblem.  
PROBLEM  
POSSIBLE CAUSE  
SOLUTION  
No power when  
POWER is on.  
No DC jack connection at  
the AC adapter.  
Insert the DC jack into the DC  
socket on back of cabinet.  
No power when plugged The AC outlet may not have Check the outlet with a working  
in.  
power.  
lamp or other electrical appliance.  
Volume control is set to  
minimum.  
Turn up the volume.  
Volume control on TV set/PA Turn up the volume at TV/PA  
system is set to minimum.  
system.  
No sound.  
TV set/PAsystem power is  
OFF.  
Turn on the power at TV/PA  
system.  
AUX OUT jacks not  
connected.  
Follow directions on page 12 for  
‘Audio Connection’.  
Disc is inserted upside  
down.  
Insert disc correctly.  
Disc is dirty.  
Wipe clean with soft cloth.  
Use a new disc.  
Disc is scratched.  
Disc is warped.  
CD PLAYER  
cannot work normally or  
Use a new disc.  
¢ ¢, ¢ ¢ , or ¢  
displayed.  
¢ are  
A nonstandard disc is  
inserted.  
Only use discs bearing standard  
logo as described on page 14.  
Moisture has formed inside Wait about 20 to 30 minutes to let  
the CD deck.  
it dry out.  
Singing Machine needs to  
be reset.  
Unplug machine for 30 seconds.  
Source Selection on your  
stereo is not set properly.  
Select AUX IN as the source for  
your home stereo.  
No sound - If audio is  
going through home  
stereo.  
Follow direction on page 12 for  
connecting to a home stereo  
system.  
Improper Connection to  
stereo system or PA.  
17  
TROUBLE SHOOTING GUIDE  
PROBLEM  
POSSIBLE CAUSE  
SOLUTION  
No sound - If audio is  
going through TV or  
VCR.  
Source Selection on TV or  
VCR is not correct.  
Follow directions on page 10 for  
‘Video Connection’.  
Connect the video cable to the  
Singing Machine’s VIDEO OUT  
andtotheTVVIDEOIN.  
Video cable is not connected  
properly to the TV.  
Source selector on TV is not Using your TV Remote to select  
set to VIDEO.  
VIDEO input.  
Connect from VIDEO OUT of the  
system to the VIDEO IN of your  
VCR or Connect to an RF  
No song lyrics appear  
on screen.  
TV does not have video line Modulator and then to the TV  
cable input. Refer to “Making the  
Connections” on page 9.  
input.  
Check the disc to be sure it is a  
CDG. (See page 5 for details)  
Check disc to be sure it is clean.  
(See page 16 for cleaning  
instructions.)  
A CDG is loaded but the  
CDG indicator is not lit.  
VERTICAL HOLD Control is Adjust the VERTICAL HOLD  
not set correctly. Control.  
Picture is jumping up.  
The Camera Lens is down. Lift up a Camera Lens.  
No image display on  
Singing Machine’s  
monitor.  
Monitor Selector is not set  
properly.  
Set MONITOR Selector to  
CAMERA mode.  
Adjust mic volume to max. Then  
back it off to a comfortable level.  
Mic volume control.  
Mic is off.  
No sound from mic.  
Turn on mic with the ON/OFF  
switch located on the microphone.  
Please call Customer Service at 954-596-1110 if the Trouble Shooting Guide information  
doesn’tcorrectyourproblem.  
Servicing of a Singing Machine by an unauthorized repair facility will void your warranty. The  
Singing Machine cannot guarantee future repairs on machines that have been tampered with by  
unauthorizedpersonnel.  
18  
SPECIFICATIONS  
AUDIO SECTION:  
OUTPUT POWER (10% THD)  
OUTPUT IMPEDANCE  
2 WATTS + 2 WATTS (RMS)  
8 ohms  
CD PLAYER SECTION:  
FREQUENCY RESPONSE  
SIGNAL - TO - NOISE RATIO  
WOW AND FLUTTER  
100 Hz - 20KHz  
50 dB  
IMMEASURABLE  
D - A CONVERSION  
NUMBER OF PROGRAMS  
SAMPLING SYSTEM  
1 BIT D/A CONVERTER  
19 TRACKS PROGRAM MEMORY  
8 TIME OVER SAMPLING  
5.5” TV MONITOR  
NTSC, PAL2 SYSTEM  
220 LINE RESOLUTION  
MONITOR SECTION  
MICROPHONE  
-74 dB 600OHM IMPEDANCE WITH  
Æ6.3mm DYNAMIC MICROPHONE  
POWER SECTION:  
(Where applicable)  
DC 16V/2500mA AC TO DC  
ADAPTER(INCLUDED)  
DIMENSIONS (H x W x D)  
WEIGHT  
11.7 x 7.6 x 8.6 Inches / 30 x 19.6 x 22 cm  
7.1 Lbs / 3.2Kg (Approx.)  
1. Pre-recorded Karaoke CD+G disc  
2. AV Cable  
3. Dynamic Microphone  
4. Instruction Manual  
ACCESSORIES  
Specifications are typical, individual units might vary. They are subject to continuous  
improvementwithoutnoticeandwithoutincurringanyobligation.  
19  
NOTES  
20  
NOTES  
21  
NOTES  
22  
LIMITED WARRANTY and SERVICE  
THE SINGING MACHINE COMPANY, INC. warrants this product to be free from defects in material  
and workmanship for a period of Ninety (90) days from date of sale to the original consumer purchaser.  
Product will be replaced or repaired free of charge if it has proven to be defective within the Ninety (90)  
day period when said product is returned at customer expense within the warranty period. THIS  
WARRANTY DOES NOT COVER ANY EXPENSES INCURRED IN THE REMOVAL AND  
REINSTALLATION OF THIS PRODUCT.  
This warranty does not apply to any product damaged by accident, misuse, abuse, improper line voltage,  
fire, water, lightning or other acts of God, or any parts or service furnished by anyone else. The warranty  
does not cover cartons, carrying cases, batteries, broken or damaged cabinets, or any other items used in  
connection with the product or consequential damages due to defect in the product. This warranty does  
not cover products sold AS IS or Re-manufactured units or units sold outside the SMC distribution  
channel.  
ALLIMPLIEDWARRANTIESARELIMITEDTOTHEDURATIONOFTHISWARRANTY.THISIS  
THE COMPLETE WARRANTY AND NO OTHER EXPRESSED WARRANTY IS VALID. SOME  
STATES DO NOT ALLOW LIMITATIONS ON HOWLONG AN IMPLIED WARRANTY LASTS OR  
AN EXCLUSION OR LIMITATIONS OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO  
THEABOVELIMITATIONSOREXCLUSIONSMAYNOTAPPLYTOYOU.  
This warranty gives you specific legal rights and you may also have other rights, which may vary from  
state to state.  
IF THE UNIT IS OUTSIDE THE WARRANTY PERIOD, please call us at (954) 596-1110 and we  
willgiveyouinformationonhowtoobtainrepairservices.  
TO OBTAIN SERVICE ON WARRANTY UNITS, the unit must be sent prepaid by insured  
parcel post or UPS to the SMC service center address. To establish your eligibility for free  
repair or replacement, YOU MUST INCLUDE a note explaining how the unit is defective,  
the street address and your phone number we should use for shipping, AND attach a  
COPYofyourproofofpurchaseshowingtheunitiswithinthe90daywarranty.  
SERVICE CENTER:  
THE SINGING MACHINE COMPANY  
303 W.Artesia Blvd.  
Compton, CA 90220-5525  
USA  
The Singing Machine Company, Inc.  
6601 Lyons Road, Bldg. A7, Coconut Creek, FL33073-9902, USA.  
TEL: (954) 596-1110 FAX: (954) 596-2000  
PRINTED IN CHINA  

Sony Ericsson T100 User Manual
Sony CD Player D 151V User Manual
Silicon Power Computer & comm SILICON GRAPHICS (IRIX 6) DOUBLE PRECISION FLSG620DA User Manual
Seagate SAVVIO ST9300603SS User Manual
Seagate MOMENTUS ST93811AS User Manual
SanDisk 80 36 03353 User Manual
Samsung GH68 23090A User Manual
Philips FM01FD05B User Manual
Philips AJ3052 User Manual
Nokia E51 User Manual