The Singing Machine SMG 180 User Manual

SMG-180  
Please read before using this unit.  
Portable Compact  
Disc + Graphics Karaoke System  
IMPORTANT SAFETY INSTRUCTIONS  
1. Read Instructions- All the safety and operating instructions should be read before the product is operated.  
2. Retain Instructions- The safety and operating instructions should be retained for future reference.  
3. Heed Warnings- All warnings on the product and in the operating instructions should be adhered to.  
4. Follow Instructions- All operating and use instructions should be followed.  
5. Cleaning - Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol  
cleaners. Useadampclothforcleaningtheexterioronly. DoNOTattempttocleantheinside.  
6. Attachments - Do not use attachments not recommended by the product manufacturer as they may cause  
hazards.  
7. Water and Moisture - Do not use this product near water - for example, near a bath tub, wash bowl, kitchen  
sink, orlaundrytub;inawetbasement, ornearaswimmingpool, andthelike.  
8. Accessories - Do not place this product on an unstable cart, stand tripod, bracket, or table. The product may  
fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand,  
tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the  
product should follow the manufacturer's instructions, and should use a mounting accessory recommended by  
the manufacturer.  
9. A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces  
maycausetheapplianceandcartcombinationtooverturn.  
10. Ventilation - Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of  
the product and to protect it from overheating, and these openings must not be blocked or covered. The  
openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This  
product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is  
provided.  
11. Power Sources - This product should be operated only from the type of power source indicated on the marking  
label. If you are not sure of the type of power supply to your home, consult your product dealer or local power  
company. For products intended to operate from battery power, or other sources, refer to the operating  
instruction.  
12. Grounding or Polarization - This product may be equipped with a polarized alternating current line plug (a  
plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety  
feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to  
fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized  
plug.  
Alternate Warnings - This product may be equipped with a three-wire grounding-type plug, a plug having a  
third (grounding) pin. This plug will only fit into a grounding-type power outlet. This is a safety feature. If you are  
unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat  
thesafetypurposeofthegrounding-typeplug.  
13. Power-Cord Protection - Power supply cords should be routed so that they are not likely to be walked on or  
pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience  
receptacles, and the point where they exit from the product.  
14. Protective Attachment Plug - The product is equipped with an attachment plug having overload protection.  
This is a safety feature. See Instruction Manual for replacement or resetting of protective device. If  
replacement of the plug is required, be sure the service technician has used a replacement plug specified by  
themanufacturerthathasthesameoverloadprotectionastheoriginalplug.  
E2  
IMPORTANT SAFETY INSTRUCTIONS  
15. OutdoorAntennaGrounding - If an outside antenna is connected to the receiver, be sure the antenna system  
is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of  
the National Electrical Code, ANSI/NFPA70, provides information with regard to proper grounding of the mast  
and supporting structure, grounding of the lead-in wire to an antenna-discharge unit, size of grounding  
conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the  
groundingelectrode. Seefigure:  
ANTENNA  
LEAD IN  
WIRE  
GROUND  
CLAMP  
ANTENNA  
DISCHARGE UNIT  
(NEC SECTION 810-20)  
ELECTRIC  
SERVICE  
EQUIPMENT  
GROUNDING CONDUCTORS  
(NEC SECTION 810-21)  
GROUND CLAMPS  
POWER SERVICE GROUNDING  
ELECTRODE SYSTEM  
S2898A  
(NEC ART 250. PART H)  
NEC-NATIONAL ELECTRICAL CODE  
16. Lightning - For added protection for this product during a lightning storm, or when it is left unattended and  
unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This  
willpreventdamagetotheproductduetolightningandpower-linesurges.  
17. Power Lines - An outside antenna system should not be located in the vicinity of overhead power lines or other  
electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside  
antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact  
withthemmightbefatal.  
18. Overloading - Do not overload wall outlets, extension cords, or integral convenience receptacles as this can  
resultinariskoffireorelectricshock.  
19. Object and Liquid Entry - Never push objects of any kind into this product through openings as they may  
touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of  
any kind on the product.  
20. Servicing - Do not attempt to service this product yourself as opening or removing covers may expose you to  
dangerousvoltageorotherhazards. Referallservicingtoqualifiedservicepersonnel.  
21. Damage Requiring Service - Unplug this product from the wall outlet and refer servicing to qualified service  
personnelunderthefollowingconditions:  
a) Whenthepower-supplycordorplugisdamaged,  
b) Ifliquidhasbeenspilled, orobjectshavefallenintotheproduct,  
c) Iftheproducthasbeenexposedtorainorwater,  
d) If the product does not operate normally by following the operating instructions. Adjust only those controls  
that are covered by the operating instructions as an improper adjustment of other controls may result in  
damage and will often require extensive work by a qualified technician to restore the product to its normal  
operation.  
e) Iftheproducthasbeendroppedordamagedinanyway, and  
f) Whentheproductexhibitsadistinctchangeinperformance-thisindicatesaneedforservice.  
22. Replacement Parts - When replacement parts are required, be sure the service technician has used  
replacement parts specified by the manufacturer or have the same characteristics as the original part.  
Unauthorizedsubstitutionsmayresultinfire, electricshock, orotherhazards.  
23. Safety Check - Upon completion of any service or repairs to this product, ask the service technician to perform  
safetycheckstodeterminethattheproductisinproperoperatingcondition.  
24. Wall or Ceiling Mounting - The product should be mounted to a wall or ceiling only as recommended by the  
manufacturer.  
25. Heat - The product should be situated away from heat sources such as radiators, heat registers, stoves, or  
other products (including amplifiers) that produce heat.  
E3  
INTRODUCTION  
Your Portable Compact Disc + Graphics Karaoke System will provide you with many years of  
fun and entertainment. It can let you be the “star” as you sing along with your favorite recordings  
andhearyourvoicewiththemusicthroughthesystem’sspeakers.  
This Karaoke System is easy to use, yet full of features with a compact design. After just a few  
simple instructions, you will become an expert. Before you use your unit, please glance through  
this manual to familiarize yourself with all the features available and the sections of the manual  
that describe their operation. Next, go to the section for the specific operation you wish to  
perform.  
Foryoureasyreference, listedherearesomeofthemainfeaturesofthisKaraokeSystem:  
LyricsonTVscreen-displaysthelyricswiththetempoofmusicwhenplayingCD+Gdiscs.  
Auto Voice Control (A.V.C.) - lets you replace the original singer's voice with your own voice  
when any prerecorded, multiplex karaoke disc or tape is played. To activate, just rotate Mic  
Volume to a comfortable listening level, andAuto Voice Control for the best balance between  
playbackandmicrophonelevels.  
Balance Control - lets you adjust the balance between the prerecorded original singer's voice  
andthemusicifyouuseamultiplexkaraokedisc.  
EchoControl-letsyouaddanechotoenrichyourvoiceforaconcerthalleffect.  
Master Volume Control- lets you turn the volume control clockwise or counter-clockwise until  
desiredvolumelevelisobtained.  
MultipleKaraokemusiccenter -itplaysaudioCompactDiscsandCD+Graphicsdiscs.  
Built-InSpeaker-letsyousharethemusicwithyourfamilyorfriends.  
Auxiliary Output Jacks - lets you connect another audio output component, such as an  
equalizer/boosteroraPAsystem.  
E4  
CONTROL LOCATIONS  
8
1
2
OPEN  
PROGRAM  
REPEAT  
PLAY//PAUSE  
CDG  
9
3
10  
11  
4
5
12  
13  
6
7
14  
15  
16  
MIC 1  
MIC 2  
MIC VOLUME  
ECHO  
MASTER VOLUME  
BALANCE AUTOVOICECONTROL  
AUDIO OUT  
VIDEO OUT  
L
R
MIN  
MAX MIN  
MAX MIN  
MAX  
L
R
LO  
HI  
17 18 19 20 21 22 23 24 25  
FRONT VIEW  
1. ON/OFF LED  
2. TRACK Indicator  
3. PROGRAM LED Indicator  
4. REPEAT LED Indicator  
5. ON/OFF Button  
13. PROGRAM Button  
14. REPEAT Button  
15. CLOSE POINT  
16. CD Door  
17. MIC 1 Jack  
18. MIC 2 Jack  
19. MIC Volume Control  
20. ECHO Volume Control  
21. MASTER Volume Control  
22. BALANCE Control  
23. AUTO VOICE CONTROL  
24. AUDIO OUT Jacks  
25. VIDEO OUT Jack  
6. PLAY/PAUSE Button  
7. STOP Button  
8. CD Cover Eject Button  
9. CDG LED Indicator  
10. PLAY/PAUSE LED Indicator  
11. SKIP/REW Button  
12. SKIP/FWD Button  
E5  
CONTROL LOCATIONS  
28  
26  
27  
29  
30  
OPEN  
DC12V  
-
+
31  
REAR VIEW  
26. Loudspeakers  
27. AC Power Cord  
28. Carrying Handle  
29. Battery Cover/AC Power Cord  
Storage Compartment  
30. DC Jack  
31. Model Number (at the bottom)  
E6  
MAKING THE CONNECTIONS  
CONNECTINGPOWER  
YoucanpowerthesystemfromastandardACoutletbyusingthesuppliedpowercord.  
CAUTION: The supplied AC power cord has a polarized plug that fits into the wall outlet only one  
way. If the plug does not fit properly, turn it over and try again. Do not force it.  
DCJACKOPERATION  
A DC jack is provided for external DC power for use in a car, boat or RV. Please be sure that  
inside of the jack is connected to 12V side and the outside of jack is connected to , negative  
side battery. 12 volt fuse protected lighter style plug extension cord with adapter is  
recommended.  
CONNECTING TO YOUR TV  
The Singing Machine provides a patch cord to give you the option of connecting your unit to an  
external audio/sound system and video device. The patch cord has three RCA jacks at each  
end. White and Red are for left and right audio connections and the yellow is for connecting the  
video.  
Make sure that you have a CDG disc in the Singing Machine and playing when you are making  
this connection. You will know you have the proper settings on your TV or VCR as soon as you  
seetheSingingMachinelogoorlyricsonthescreen!  
VIDEOCONNECTION  
PleasefollowthestepsbelowtodisplayCDGlyricsontheTVscreen:  
(1) Locatethemulticoloredpatchcords.  
(2) Connectvideocable(yellow)totheVideoOutofthefrontoftheSingingMachine.  
(3) Connect the other end of the video cable (yellow) to the Video Input on your TV or  
VCR.  
FRONT VIEW OF  
SINGING MACHINE  
REAR VIEW OF TV  
VIDEO IN  
AUDIO OUT  
VIDEO OUT  
L
R
VIDEO IN  
(YELLOW JACK)  
VIDEO OUT  
(YELLOW JACK)  
E7  
MAKING THE CONNECTIONS  
If your television does not have the required Video Input, you will need an RF Modulator (Radio  
Frequency Modulator), which connects through your TV Antenna or cable line and serves as  
Video Input.  
An RF Modulator can be purchased at almost any consumer electronics retailer. If you are  
connecting the video from the Singing Machine to either a television or a VCR video input jack,  
you must specify the source the TV or VCR is to display.Your TV or VCR user guide can tell you  
howtodisplaythevideosignalfromtheVideoInjack.  
If you don’t have the manual for your TV or VCR we suggest calling the TV or VCR  
manufacturer’s customer service department. Only the manufacturer will be able to tell you very  
quickly how to configure your TV or VCR to display the video signal coming from the ‘Video  
Inputjack.  
D Note: Some projection TV sets do not display the standard blue background used on most  
CDGs properly. If the background color is inconsistent or flashing, please try connecting your  
SingingMachinetoastandardtubetelevision.  
COMMONWAYSTOCONFIGUREYOURTVORVCR  
Your Singing Machine is designed to connect to your TV the same way you would connect a  
video camera, VCR or video game. The Singing Machine is constantly sending the video and  
audio signals to the 'Video Out' and 'AUX OUT' jacks whenever you play a CDG. So, load a CDG  
into your Singing Machine before you start making these connections. You will see lyrics on the  
TVscreenassoonasyougetthesetupcompletedcorrectly.  
We refer to TV/VCR because manufacturers use very similar ways to connect TVs and VCRs  
and you can connect your Singing Machine to a TV, VCR or satellite system.The setup of your  
TV/VCR is the most difficult part of making the connection for displaying your Singing Machine  
lyrics. In most homes, the TV has either a cable connected or antennae in use. Once you  
connect your Singing Machine to the TV/VCR, you must 'tell' your TV/VCR to display the input  
fromtheSingingMachineinsteadoftheusualinputfromthecableorantennae.  
Check your TV/VCR user manual for the easiest way to setup your particular entertainment  
system. If you don't have your manual you can always call your TV/VCR manufacturer for that  
information or try hitting their website for online assistance. We've listed below the most  
commonwaysofsettingupaTV/VCR:  
(1) In the setup menu for configuring the TV/VCR there may be an option on 'Input Selection'  
whereyoumaychoosebetween'Cable/Ant.', 'Video1', or'Video2'etc. astheinputsource.  
(2) Try looking for a 'Video' channel between the highest channel and the lowest channel on  
yourTVorVCR. (i.e. Between99and2maybe'VIDEO'or'INPUT'or'GAME')  
(3) Look for a button on the remote control for the TV/VCR you are connecting to that says  
'VIDEO', 'VIDEO 1', 'Game', 'AUX', 'EXT', 'LINE1', 'LINE-IN' or occasionally the 'VCR'  
buttonwilldisplaytheVideoinputsource.  
E8  
MAKING THE CONNECTIONS  
AUDIO CONNECTION  
Connect the SMG-180 to your TV or home stereo system using the White and Red connections  
on the supplied patch cord. Plug the white end of the patch cord into the white output jack on the  
SMG-180. Plug the red end of the patch cord into the red output jack on the SMG-180. Now  
connect the other end of the cable’s white (left channel) and red (right channel) plugs to your TV  
orhomestereosystem’sAudioInorAuxiliaryInjacks.  
FRONT VIEW OF  
SINGING MACHINE  
REAR VIEW OF TV  
R
L
AUDIO OUT  
VIDEO OUT  
AUDIO IN  
L
R
AUDIO OUT  
R
(RED JACK)  
AUDIO IN  
R
(RED JACK)  
AUDIO IN  
L
(WHITE JACK)  
AUDIO OUT  
L
(WHITE JACK)  
FORCONNECTINGANAUDIOCOMPONENTFOROUTPUT  
To connect an audio component (such as a power amplifier or PAsystem amplifier) so you can  
hear the system’s music & vocal through it, plug the audio component into the AUDIO OUT  
Jacks.  
FRONT VIEW OF  
SINGING MACHINE  
ANOTHER  
AUDIO COMPONENT  
R
L
AUDIO OUT  
VIDEO OUT  
AUDIO IN  
L
R
AUDIO OUT  
R
(REDJACK)  
AUDIO IN  
R
(RED JACK)  
AUDIO IN  
L
(WHITEJACK)  
AUDIO OUT  
L
(WHITEJACK)  
E9  
CD OR CD+G OPERATION  
PREPARATION  
! This unit is designed to play CD’s bearing the identification logo "  
conformtotheCDstandard, theymaynotplayproperly.  
". If CD’s do not  
! Fingerprints and dust should be carefully wiped off with a soft cloth. Wipe in a straight motion  
fromthecenterofthedisctotheoutsideedge.  
! Never use chemicals, such as record cleaning sprays, antistatic sprays or fluids, benzene or  
thinner to clean compact discs. These chemicals will permanently damage the plastic  
surfaceofthedisc.  
! Always place the compact disc on the disc tray with the label facing upward. Compact discs  
canbeplayedononlyoneside.  
! To remove a disc from its storage case, press down on the center of the case and lift the disc  
out, holdingitcarefullybytheedges.  
! Discsshouldbereturnedtotheircasesafterusetoprotectthemfromdustandscratches.  
! To prevent warping the disc, do not expose it to direct sunlight, high humidity or high  
temperaturesforextendedperiodsoftime.  
! Do not apply paper or write anything on either side of the disc. The inks used in some felt-tips  
pensmaydamagethesurfacesofthedisc.  
PLAYINGCDORCD+GDISC  
Reminders:  
! AdjustMASTERVOLUMEcontrolonyourunit, TVoraudiosystemtoacomfortablelevel.  
! Adjust MIC/ECHO/BALANCE controls as needed to achieve the desired mix of music and  
vocalsthroughyourTVorsoundsystem.  
! DonotpressthedisccoveroftheCDcompartmentwhileit’splaying.  
! Never place anything except a compact disc on the disc tray. Foreign objects can damage  
the unit.  
! Do not apply excessive force to disc cover.  
! Only place one disc on the disc tray at a time.  
TURNING ON/OFF  
To turn on the Karaoke center, press the ON/OFF button, the ON/OFF LED will light up. To turn  
off the system, press the ON/OFF button again, the ON/OFF LED will turn off.  
LOADINGADISC  
Press the OPEN button to open the CD door. Place a disc in the compartment with the printed  
sidefacingtowardyou.  
Press the Close Point indentation on the CD door to close the CD compartment. The LED will  
displaythetotalnumberoftracks. (Ifnodiscisloaded, itwilldisplay"  
").  
(Refer to the Trouble Shooting Guide on page E13 if a disc is loaded but the total tracks  
do not appear.)  
REMOVINGADISC  
Press the OPEN button to open the CD compartment cover. Press on the black plastic center of  
the CD player with one finger while lifting the outer edge of the CD to release disc. Lift the CD out  
ofthecompartmentbyholdingtheCDbytheouteredgeofthedisc.  
E10  
CD OR CD+G OPERATION  
PLAY/PAUSEMODE  
To start playing, press the PLAY/PAUSE button, the first track [ ] and the PLAY/PAUSE LED  
indicatorwillbedisplayed.  
To temporarily stop playing, press the PLAY/PAUSE button, the PLAY/PAUSE LED Indicator  
willflash.  
Toresumeplay, pressthisbuttonagain.  
STOPMODE  
If the STOP button is pressed in the course of playing, the disc will cease to play. (The total  
numberoftrackswillbeshownintheLEDwindow).  
SKIP(FORBOTHCDANDCDGDISCS)  
During STOP mode, you can skip up or down to your desired track number by pressing a SKIP  
button (  
Toresumeplayingtheselectedsong, pressPLAY/PAUSEbutton.  
-SKIP-  
).  
SEARCH(FORAUDIOCDSONLY)  
When playing audio CD, press and hold the SKIP button (  
-SKIP-  
), the CD will search at  
high speed in the forward or backward direction. Normal play will continue when you release the  
button.  
REPEAT  
! To repeat the track currently playing, press the REPEAT button once, the REPEAT LED  
Indicatorwillflash.  
! Torepeatalltracks, presstheREPEATbuttontwice, theREPEATLEDIndicatorwillstaylit.  
! To clear the repeat function. Press the REPEAT button again, the REPEAT LED Indicator will  
turn off.  
PROGRAM  
! Use this button to program and play back songs in a preselected order.  
Step 1: Programming should be done in the stop mode only. Press the PROGRAM key  
until the PROGRAM LED flashes, the track will read [ ].  
Step 2: Press the double arrow keys (  
-SKIP-  
) to select a desired track.  
Step 3: Press PROGRAM key to confirm entry. You can repeat the same steps up to a  
maximum of 20 tracks.  
Step 4: Press PLAY to activate PROGRAM.  
! PresstheSTOPbuttontoclearalltheprogrammedentries.  
E11  
CARE AND MAINTENANCE  
POWER SWITCH  
After using the unit, turn off the power by  
pressing the ON/OFF button.  
CLEANING DISC  
Cleaning will not normally be necessary.  
However, should fingerprints, dust or  
dirt appear, you can wipe them off with a  
soft, lint-free cloth. Wipe the disc in a  
straight line from center to edge. You  
can moisten the disc first with ordinary  
tap water if necessary.  
CLEANING THE UNIT  
To clean the exterior of the unit, simply wipe  
with a soft clean cloth moistened with plain  
lukewarm water.  
CLEANING THE CD LASER LENS  
For Best Results: Use a CD-lens cleaning  
disc according to the cleaning disc  
manufacturerinstructions.  
If a lens cleaning disc is not available, use a  
clean, soft, dry cotton cloth to gently wipe the  
small, glass, fish-eye laser lens located in the  
CDplayer.  
N O T E : D o n o t u s e t h e  
d e t e r g e n t o r a b r a s i v e  
cleaning agents, for they can  
damage the disc.  
To prevent fire or shock hazard,  
disconnect your stereo system  
from the AC power plug when  
cleaning.  
CD PLAYER  
The player mechanism is fitted with self-  
lubricating bearing and must not be  
oiled or greased.  
COMPACTDISC  
HANDLINGDISC  
Although the music tracks in the disc are  
covered with a protective layer, it is still  
advisable to treat the disc carefully. Ensure  
that you always pick up discs by the edge,  
and put them back in their holders  
immediately after use.  
E12  
TROUBLE SHOOTING GUIDE  
If you have followed the instructions and are having difficulty operating the unit, locate the  
PROBLEM in the left column below. Check the corresponding POSSIBLE CAUSE column to  
locateandremedytheproblem.  
PROBLEM  
POSSIBLE CAUSE  
SOLUTION  
No power plug connection at Insert the power plug into the AC  
the AC outlet.  
outlet.  
No power when ON/OFF  
button is pressed.  
No DC jack connection at  
the AC adapter  
Insert the DC jack into the DC  
socket on the back of the cabinet.  
No power when plugged The AC outlet may not have Check the outlet with a working  
in.  
power.  
lamp or other electrical appliance.  
Volume control is set to  
minimum.  
Turn up the volume.  
Volume control on TV set/PA Turn up the volume at TV/PA  
system.  
system is set to minimum.  
No sound.  
TV set/PAsystem power is  
OFF.  
Turn on the power at TV/PA  
system.  
AUX OUT jacks not  
connected.  
Follow directions on page E9 for  
‘Audio Connection’.  
No sound - If audio is  
going through TV or  
VCR.  
Source Selection on TV or  
VCR is not correct.  
Follow directions on page E7 for  
‘Video Connection’.  
Source Selection on your  
stereo is not set properly.  
Select AUX IN as the source for  
your home stereo.  
No sound - If audio is  
going through home  
stereo.  
Follow direction on page E9 for  
connecting to a home stereo  
system.  
Improper Connection to  
stereo system or PA.  
P l a c e  
a
d i s c i n t h e  
compartment with the shiny Insert disc correctly.  
sidefacingtowardyou.  
Disc is dirty.  
Wipe clean with soft cloth.  
Use a new disc.  
CD PLAYER  
cannot work normally or  
aaa”, “aa” , or “aaa”  
are displayed.  
Disc is scratched.  
Disc is warped.  
Use a new disc.  
A nonstandard disc is  
inserted.  
Only use discs bearing standard  
logo as described on page E10.  
E13  
TROUBLE SHOOTING GUIDE  
PROBLEM  
POSSIBLE CAUSE  
SOLUTION  
Singing Machine needs to  
be reset.  
Disconnect the machine from  
power source for 30 seconds.  
CD PLAYER  
cannot work normally or  
aai”, “aa”, or “aaa” are  
displayed.  
Moisture has formed inside Wait about 20 to 30 minutes to let  
the CD deck.  
it dry out.  
Connect the video cable to the  
Singing Machine’s VIDEO OUT  
andtotheTVVIDEOIN.  
Video cable is not connected  
properly to the TV.  
Source selector on TV is not Using your TV Remote to select  
set to VIDEO.  
VIDEO input.  
Connect from VIDEO OUT of the  
system to the VIDEO IN of your  
VCR or Connect to an RF  
No song lyrics appear  
on screen.  
TV does not have video line Modulator and then to the TV  
input.  
cable input. Refer to “Making the  
Connections” on page E7.  
Check the disc to be sure it is a  
CDG. (See page E16 for details.)  
Check disc to be sure it is clean.  
(See page E12 for cleaning  
instructions.)  
A CDG is loaded but the  
CDG indicator is not lit.  
Please call Customer Service at (866) 670-6888 if the Trouble Shooting Guide information  
doesn’tcorrectyourproblem.  
Servicing of a Singing Machine by an unauthorized repair facility will void your warranty. The  
Singing Machine cannot guarantee future repairs on machines that have been tampered with by  
unauthorizedpersonnel.  
E14  
SPECIFICATIONS  
AUDIO SECTION:  
OUTPUT POWER (MAXIMUM)  
OUTPUT IMPEDANCE  
0.6 WATTS + 0.6 WATTS (RMS)  
8 OHMS  
CD PLAYER SECTION:  
FREQUENCY RESPONSE  
SIGNAL - TO - NOISE RATIO  
WOW AND FLUTTER  
20 Hz - 20 kHz (+/- 3dB)  
65 dB  
IMMEASURABLE  
D - A CONVERSION  
NUMBER OF PROGRAMS  
SAMPLING SYSTEM  
1-BIT DAC  
20 STEPS RANDOM ACCESS PROGRAMMING  
8 TIMES OVER SAMPLING  
-74dB 600 OHMS IMPEDANCE WITH 6.3mm  
DYNAMIC MICROPHONE  
MICROPHONE  
AC 110V-120V~60Hz OR AC 220V-240V~50Hz OR  
DC 12V (8 x “C” CELL) OR  
DC 12V 800mA ACTO DC ADAPTER  
(BATTERIES AND ADAPTER ARE NOT INCLUDED)  
POWER SOURCE  
(WHERE APPLICABLE)  
DIMENSIONS (H x W x D)  
10.0 x 11.5 x 9.6 Inches / 25.5 x 29.5 x 24.5 cm  
5.3 lbs / 2.4 kgs  
WEIGHT  
1. PRE-RECORDED KARAOKE CD+G DISC  
2. AV CABLE  
3. DYNAMIC MICROPHONE  
ACCESSORIES  
Specifications are typical, individual units might vary. They are subject to continuous  
improvementwithoutnoticeandwithoutincurringanyobligation.  
E15  
THE SINGING MACHINE KARAOKE GLOSSARY OF TERMS  
In addition to all of the terminology associated with consumer electronics products, a few  
additional terms are used almost exclusively in karaoke. These terms are meant to familiarize  
you with the world of Karaoke. The features listed below may not necessarily pertain to the  
particular model Singing Machine that you have. The following are some brief explanations of  
karaoketerms:  
Echo:  
Echo adds depth and resonance to a singer's voice, without affecting the music. This echo is  
producedbycreatingminorcontrolledfeedbackinthesinger'svoice.  
Multiplex:  
Our multiplex recordings contain 2 copies of the same song. One version is a stereo recording of  
the song without the lead singer. The second version is recorded with the music and  
background vocals on the left channel and the lead singer recorded on the right channel. This  
‘split track’ recording allows you to control the volume of the lead singer by adjusting the balance  
control. You can sing a duet with the lead singer or use the lead singer as a guide as you learn  
the song, gradually fading them out with the balance control until you are able to sing the song  
onyourown.  
AutoVoiceControl(A.V.C.):  
When the AVC function is activated, the vocals on a multiplex recording are eliminated as soon  
as the singer begins singing into the microphone. When the singer stops singing, the vocals on  
the multiplex recording are automatically re-activated. This useful function is used primarily  
during practice sessions while a singer is learning a song. Please note that the AVC function  
onlyworkswithmultiplexrecordingandnotwithstandardaudiorecordings.  
PitchControl:  
This function controls pitch of music by controlling the speed at which a cassette tape plays  
back. By increasing the speed of the tape, the music sounds higher (sharp). By slowing the tape  
speed, themusicsoundslower(flat).  
KeyController:  
Key Controller changes the key of the CD/CDG music (+ or - steps) to adjust to the singer’s  
voice.  
CDG:  
This is an acronym for Compact Disc plus Graphics. You will also see variations CD+G, and  
CD+Graphics. This is a regular audio CD with information stored on a data track simultaneous  
to music. In laymen's terms, CDG has a video output for simple graphics (not full motion video).  
In the case of karaoke, the graphics function is used to store song lyrics, and display the lyrics in  
synch with music. In most cases, CDG software displays lyrics which change color as they are  
to be sung. A regular television is all that is required to display CDG lyrics.  
NOTE - CDG is a particular type of compact disc encoding system that is different from VCD or  
DVD. Your Singing Machine can decode standard audio compact discs and CDG discs. It will  
notreadVCDorDVDencodeddiscs.  
Standard audio discs and cassette tapes will not display lyrics on your TV. Audio CDs do not  
containthesoftwarenecessarytodisplaylyrics.  
E16  
LIMITED WARRANTY and SERVICE  
THE SINGING MACHINE COMPANY, INC. warrants this product to be free from defects in material  
and workmanship for a period of Ninety (90) days from date of sale to the original consumer purchaser.  
Product will be replaced or repaired free of charge if it has proven to be defective within the Ninety (90)  
day period when said product is returned at customer expense within the warranty period. THIS  
WARRANTY DOES NOT COVER ANY EXPENSES INCURRED IN THE REMOVAL AND  
REINSTALLATION OF THIS PRODUCT.  
This warranty does not apply to any product damaged by accident, misuse, abuse, improper line voltage,  
fire, water, lightning or other acts of God, or any parts or service furnished by anyone else. The warranty  
does not cover cartons, carrying cases, batteries, broken or damaged cabinets, or any other items used in  
connection with the product or consequential damages due to defect in the product. This warranty does  
not cover products sold AS IS or Re-manufactured units or units sold outside the SMC distribution  
channel.  
ALLIMPLIEDWARRANTIESARELIMITEDTOTHEDURATIONOFTHISWARRANTY.THISIS  
THE COMPLETE WARRANTY AND NO OTHER EXPRESSED WARRANTY IS VALID. SOME  
STATES DO NOT ALLOW LIMITATIONS ON HOWLONG AN IMPLIED WARRANTY LASTS OR  
AN EXCLUSION OR LIMITATIONS OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO  
THEABOVELIMITATIONSOREXCLUSIONSMAYNOTAPPLYTOYOU.  
This warranty gives you specific legal rights and you may also have other rights, which may vary from  
state to state.  
TO OBTAIN WARRANTY OR OUT OF WARRANTY SERVICE - DO NOT RETURN YOUR  
MACHINE BACK TO THE STORE, please call our Customer Service department at (866) 670-  
6888 so that we can give you the necessary information on how to obtain your repair or  
replacement. Do NOT send your machine to the corporate address listed on this card or on our  
website. No repairs are done at this location and your machine will be returned to you at your  
expense. Please keep a copy of your receipt. A copy of your receipt is required to obtain service  
within the90-daywarranty.  
ForCustomersinU.S.A  
SERVICE CENTER:  
THE SINGING MACHINE COMPANY  
18375 S. Broadwick St.  
Rancho Dominguez, CA 90220  
U.S.A  
For Customers in Canada  
SERVICE CENTER:  
An-Mar Service, Inc.  
15 Cedar Point Dr Unit 3  
Barrie, Ont, L4N-5R7  
Canada  
E17  
The Singing Machine Company, Inc.  
180-0308-ENG01  
6601 Lyons Road, Bldg. A7, Coconut Creek, FL33073-9902, USA.  
TEL: (954) 596-1000  
PRINTED IN CHINA  
FAX: (954) 596-2000  

Yamaha RX E100 User Manual
Sony XPERIA ION 1269 0622 User Manual
Sony Mobile Xperia SL Smartphone 1266 9648 User Manual
Sony Ericsson Z800i User Manual
Seagate SAVVIO ST9300605SS User Manual
Seagate BARRACUDA ES SERIAL ATA ST3400820NS User Manual
Pioneer DEH P47DH User Manual
Philips SPD5125 User Manual
Optimus CD 3322 User Manual
Onkyo DX C390 User Manual